Data Sheet. ASMT-Jx3x 3 W Mini Power LED Light Source. Description. Features. Applications

Transcription

1 ASM-Jx3x 3 W Mini Power LED Light Source Data Sheet Description he 3 W Mini Power LED Light Source is a high performance energy efficient device that can handle high thermal and high driving current. Option with electrically isolated metal slug is also available. he low profile package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. he package is compatible with reflow soldering process. o facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Features Available in Deep Red, Red, Red Orange, Amber, Green, Blue, and Royal Blue Small footprint and low profile Symmetrical outline Energy efficient Direct heat transfer from metal slug to motherboard Compatible with reflow soldering process High current operation Long operation life Wide viewing angle Silicone encapsulation Non-ESD sensitive (threshold > 16 kv) MSL 1 products Applications Sign backlight Safety, exit and emergency sign lightings Specialty lighting such as task lighting and reading lights Retail display Commercial lighting Accent or marker lightings, strip or step lightings Portable lightings, bicycle head lamp, torch lights. Decorative lighting Architectural lighting Pathway lighting Street lighting Pedestrian street lighting unnel lighting Horticulture CAUION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering.

2 Package Dimensions Ø Anode Lead NC Lens Cathode Mark NC NC Metal Slug.65 Body NC Cathode Lead.6 Ø 1.7 Figure 1. ASM-Jx3x package outline drawing Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. olerance is ±.1 mm, unless otherwise specified. 4. erminal finish: Ag plating. 5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short. 2

3 Part Numbering System ASM- J x1 3 x2 x3 x4 x5 x6 x7 Packaging Option Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice ype N InGaN A AlInGaP Heat Sink Electrically Non-isolated 1 Electrically Isolated D Deep Red R Red H Red Orange A Amber G Green B Blue L Royal Blue Note: 1. For selection details, see page 1. Device Selection Guide ( J = 25 C) Part Number Luminous Flux (lm) / Radiometric Power (mw), Φ V [1,2] Min. yp. Max. est Current (ma) Dice echnology ASM-JD3-ALN1 Deep Red 175 mw 24 mw 355 mw 35 AllnGaP No ASM-JR3-AS1 Red AllnGaP No ASM-JH3-ARS1 Red Orange AllnGaP No ASM-JA3-ARS1 Amber AllnGaP No ASM-JG31-NUW1 Green InGaN Yes ASM-JB31-NNP1 Blue InGaN Yes ASM-JL31-NRS1 Royal Blue 515 mw 6 mw 685. mw 35 InGaN Yes Notes: 1. Φ V is the total luminous flux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition. 2. Flux tolerance is ±1%. Electrically Isolated Metal Slug 3

4 Absolute Maximum Ratings Parameter AllnGaP InGaN Units DC Forward Current [1] 7 7 ma Peak Pulsing Current ma Power Dissipation mw LED Junction emperature C Operating Metal Slug emperature Range at 35 ma -4 to to +12 C Operating Metal Slug emperature Range at 7 ma -4 to +1-4 to +15 C Storage emperature Range -4 to to + 12 C Soldering emperature See Figure 24 Reverse Voltage [2] Not recommended Notes: 1. Derate linearly based on Figure 1 for AlInGaP and Figure 2 for InGaN. 2. Not designed for reverse-bias operation. Optical Characteristics at 35 ma ( J = 25 C) 4 Part Number Peak Wavelength, λ PEAK (nm) Dominant Wavelength, λ D [1] (nm) Viewing Angle, 2θ ½ [2] ( ) yp. yp. yp. yp. Luminous Efficiency (lm/w) ASM-JD3-ALN1 Deep Red Not Applicable ASM-JR3-AS1 Red ASM-JH3-ARS1 Red Orange ASM-JA3-ARS1 Amber ASM-JG31-NUW1 Green ASM-JB31-NNP1 Blue ASM-JL31-NRS1 Royal Blue Not Applicable Electrical Characteristic at 35 ma ( J = 25 C) Dice ype Forward Voltage, V F (V) Min. yp Max. yp. AllnGaP InGaN Note: 1. Rθ j-ms is hermal Resistance from LED junction to metal slug. Optical and Electrical Characteristic at 7 ma ( J = 25 C) Part Number hermal Resistance, Rθ j-ms ( C/W) [1] Luminous Flux (lm) / Radiometric Power (mw), φ V ASM-JD3-ALN1 Deep Red 48 mw 2.4 ASM-JR3-AS1 Red ASM-JH3-ARS1 Red Orange ASM-JA3-ARS1 Amber ASM-JG31-NUW1 Green ASM-JB31-NNP1 Blue ASM-JL31-NRS1 Royal Blue 12 mw 3.6 yp. Forward Voltage, V F (V) yp.

5 AlInGaP RELAIVE INENSIY AMBER RED ORANGE RED DEEP RED WAVELENGH - nm Figure 2. Relative Intensity vs. Wavelength for Deep Red, Red, Red Orange and Amber RELAIVE LUMINOUS FLUX/ RADIOMERIC POWER (NORMALIZED A 35 ma) OHERS DEEP RED DC FORWARD CURREN - ma Figure 3. Relative Luminous Flux/ Radiometric Power vs. Mono Pulse Current FORWARD CURREN - ma FORWARD VOLAGE - V Figure 4. Forward Current vs. Forward Voltage NORMALIZED INENSIY ANGULAR DISPLACEMEN - DEGREES Figure 5. Radiation Pattern Deep Red, Red, Red Orange and Amber Ip - PULSE CURREN - A D = t p D = tp.2 I F tp - PULSE DURAION - sec Ip - PULSE CURREN - A D = tp D = tp - PULSE DURAION - sec t p I F Figure 6. Maximum pulse current vs. ambient temperature. Derated based on A = 25 C, Rθ J-A = 3 C/W. Figure 7. Maximum pulse current vs. ambient temperature. Derated based on A = 85 C, Rθ J-A = 3 C/W. 5

6 RELAIVE LIGH OUPU - % (NORMALIZED A 25 C) DEEP RED RED RED-ORANGE AMBER JUNCION EMPERAURE, J - C Figure 8. Relative Light Output vs. Junction emperature FORWARD VOLAGE SHIF - V (NORMALIZED A 25 C) DEEP RED RED ORANGE AMBER RED JUNCION EMPERAURE, J - C Figure 9. Forward Voltage Shift vs. Junction emperature MAX ALLOWABLE DC CURREN - ma Rθ J-A = 2 C/W Rθ J-A = 25 C/W Rθ J-A = 3 C/W AMBIEN EMPERAURE, A - C Figure 1. Maximum Forward Current vs. Ambient emperature. Derated based on JMAX = 125 C, Rθ J-A = 2 C/W, 25 C/W and 3 C/W. MAX ALLOWABLE DC CURREN - ma Rθ J-MS = 9 C/W MEAL SLUG EMPERAURE, MS - C Figure 11. Maximum Forward Current vs. Ambient emperature. Derated based on JMAX = 125 C, Rθ J-MS = 9 C/W. 6

7 InGaN RELAIVE INENSIY GREEN BLUE ROYAL BLUE WAVELENGH - nm Figure 12. Relative Intensity vs. Wavelength for Blue and Green RELAIVE LUMINOUS FLUX (NORMALIZED A 35 ma) MONO PULSE CURREN - ma Figure 13. Relative Luminous Flux vs. Mono Pulse Current FORWARD CURREN - ma FORWARD VOLAGE - V Figure 14. Forward Current vs. Forward Voltage NORMALIZED INENSIY ROYAL BLUE.7.6 GREEN.5 BLUE ANGULAR DISPLACEMEN - DEGREES Figure 15. Radiation Pattern for Royal Blue, Blue and Green 7

8 IP - PULSE CURREN - A D = t p tp - PULSE DURAION - sec t p D = I F IP - PULSE CURREN - A D = D = t p tp - PULSE DURAION - sec t p I F Figure 16. Maximum pulse current vs. ambient temperature. Derated based on A = 25 C, Rθ J-A = 3 C/W Figure 17. Maximum pulse current vs. ambient temperature. Derated based on A = 85 C, Rθ J-A = 3 C/W RELAIVE LIGH OUPU - % (NORMALIZED A 25 C) BLUE GREEN ROYAL BLUE JUNCION EMPERAURE, J - C Figure 18. Relative Light Output vs. Junction emperature FORWARD VOLAGE SHIF - V (NORMALIZED A 25 C) BLUE ROYAL BLUE GREEN JUNCION EMPERAURE, J - C Figure 19. Forward Voltage Shift vs. Junction emperature MAX ALLOWABLE DC CURREN - ma Rθ J-A = 2 C/W Rθ J-A = 25 C/W Rθ J-A = 3 C/W AMBIEN EMPERAURE, A - C Figure 2. Maximum Forward Current vs. Ambient emperature. Derated based on JMAX = 135 C, Rθ J-A = 2 C/W, 25 C/W and 3 C/W MAX ALLOWABLE DC CURREN - ma Rθ J-MS = 9 C/W MEAL SLUG EMPERAURE, MS - C Figure 21. Maximum Forward Current vs. Metal Slug emperature. Derated based on JMAX = 135 C, Rθ J-MS = 9 C/W 8

9 Solder Pad.85.8 ø1.9 Slug Indepdent Solder Pad 1.3 Figure 22. Recommended soldering land pattern Figure 23. Recommended pick and place nozzle tip. Inner diameter = 3.2 mm 1-3 SEC. EMPERAURE 217 C 2 C 15 C C 3 C/SEC. MAX. 3 C/SEC. MAX. 6 C/SEC. MAX SEC. 1 SEC. MAX. IME Figure 24. Recommended Reflow Soldering Profile (Acc. to J-SD-2C) Note: For detailed information on reflow soldering of Avago surface mount LEDs, refer to Avago Application Note AN 16 Surface Mounting SM LED Indicator Components. 9

10 Option Selection Details ASM-J x 1 3 x 2 x 3 x 4 x 5 x 6 x 7 x 4 Minimum Flux Bin Selection x 5 Maximum Flux Bin Selection x 6 Bin Selection x 7 Packaging Option Bin Selection (x 6 ) Individual reel will contain parts from one color bin selection only. Selection Bin ID Full Distribution Z Y W V Q P N M Bin Limits A and B B and C C and D D and E A, B and C B, C and D C, D and E D, E and F Packaging Option [x 7 ] Selection Bin ID Option 1 ape and Reel Dominant Wavelength (nm) at 35 ma Min. Max. Red Red Orange Amber B C D E Blue A B C D Green A olerance: ±1 nm B C D Flux Bin Limit [x 4, x 5 ] Luminous Flux (lm)/ Radiometric Power (mw) at 35 ma Bin ID Min. Max. Blue M N P Q Other s R Deep Red and Royal Blue olerance for each bin limit is ± 1% Example Bin ID S U V W L M N P Q R S Peak Wavelength (nm) at 35 ma Min. Max. Deep Red Royal Blue C olerance: ± 2 nm D E F ASM-JG31-NS1 ASM-JG31-Nxxxx Green, InGaN, Electrically isolated Heat Sink X 4 = S Minimum Flux Bin S X 5 = Maximum Flux Bin X 6 = Full Distribution X 7 = 1 ape and Reel Option 1

11 ape and Reel Option 1 4. ±.1 2. ±.5 ø1.5 ± ±.1.25 ± ± ±.1 8. ±.1 8 ø1.5 ± ±.1.25 ± ± ±.1 Figure 25. Carrier ape Dimensions 13.2 ± ±.5 3 ±.5 ø21. ±.5 ø1 ø13.1 ± ±1 ø6 ±.5 4 ±.5 5 ±.5 Notes: 1. Empty component pockets sealed with top cover tape or 5 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. Figure 26. Reel dimensions 11

12 USER FEED DIRECION CAHODE SIDE PRINED LABEL Figure 27. Reeling Orientation DISCLAIMER: Avago s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our web site: Avago, Avago echnologies, and the A logo are trademarks of Avago echnologies in the United States and other countries. Data subject to change. Copyright Avago echnologies. All rights reserved. AV2-1941EN - December 1, 214