T2016M Pure colors High Power LED

Transcription

1 PRELIMINARY PRODUCT DATASHEET T2016M Pure colors High Power LED Introduction The T2016M LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, T2016M LEDs from TSLC feature very high brightness and efficacy, as well as excellent lifetime. Table of Contents Characteristics. 1 Mechanical Dimensions 3 Recommended Solder Pad Design... 4 Relative Spectral Power Distribution... 5 Typical Spatial Radiation Pattern... 5 Typical Forward L-I Characteristics.. 6 Typical Forward I-V Characteristics. 7 Recommended Soldering Profile.. 8 Packing Information. 9 RoHS Compliant

2 Characteristics Absolute Maximum Ratings (Tj = 25 C) Parameter DC Torch mode Forward Current (ma) Peak Pulse Flash mode Flash mode Current (ma) Rating Pure color Series 700mA (UV/Royal blue/blue/cyan/green) 500mA (Amber/Red/Super red) 1000mA (UV/Royal blue/blue/cyan/green) 700mA (Amber/Red/Super red) 150 C (UV/Royal blue/blue/cyan/green) LED Junction Temperature 125 C (Amber/Red/Super red) LED Operating Temperature -40 C ~ 85 C Storage Temperature -40 C ~ 115 C Soldering Temperature Max. 260 C / Max. 10sec. (JEDEC 020D) ESD Sensitivity 8,000 V HBM (MIL-STD-883G) Reverse Voltage Not designed to be driven in reverse bias (VR 5V) Preconditioning Acc. to JEDEC Level 1 Product Nomenclature T 2016 M BN N 5 XXXXXX 1 2~ ~16 Code 1: Substrate composition, T: Ceramic AlN Code : Package size, 2016: 2.05*1.65 mm Code 6: Class Code, M: Pure color ; U:UV Code 7.8: Color type, BN: Blue Code 9: Lens type, N: Flat Code 10: Lens version Code 11~16: internal code 1

3 General Characteristics at 350mA Part number Color Dominate wavelength (Wd) Peak wavelength (Wp*) 2θ 1/2 Temperature Coefficient of Vf (mv/ C) Thermal Resistance Junction to Pad ( C/W) Min Max ΔVF /ΔTJ RΘ J-L T2016M-ANN1 Amber 585nm 595nm T2016M-RNN1 Red 620nm 630nm T2016M-SNN1 Super red 650*nm 670*nm T2016M-DNN1 Royal blue 440*nm 450*nm T2016U-UNN1 UV 380nm 420nm 140-2~-4 6 T2016M-BNN1 Blue 450nm 470nm T2016M-CNN1 Cyan 490nm 510nm T2016M-GNN1 Green 515nm 535nm Luminous Flux and Forward Voltage at 350mA (Tj = 25 C) Part number Color Minimum (LOP/Rad*) Forward Voltage Min Max T2016M-ANN1 Amber 30lm 2.4V 3.4V T2016M-RNN1 Red 30lm 2.4V 3.4V T2016M-SNN1 Super red 200*mw 2.4V 3.4V T2016U-UNN1 UV 300*mw 3.4V 4.4V T2016M-DNN1 Royal blue 300*mw 3.4V 4.4V T2016M-BNN1 Blue 10lm 3.4V 4.4V T2016M-CNN1 Cyan 60lm 3.4V 4.4V T2016M-GNN1 Green 60lm 3.4V 4.4V Note: 1. Luminous Flux is measured with an accuracy of ±10% 2. The forward voltage is measured with an accuracy of ±0.2V. 2

4 Mechanical Dimensions Cathode + - Protection device Notes : 1. Drawing is not to scale 2. All dimensions are in millimeter 3. Dimensions are ±0.13mm unless otherwise indicated 3

5 Recommended Solder Pad Design Recommended Soldering Pad Design Recommended Stencil Pattern Design (Marked Area is Opening) Notes : 1. Drawing is not to scale 2. All dimensions are in millimeter 4

6 Relative Spectral Power Distribution, Tj=25 C Typical Spatial Radiation Pattern 5

7 Typical Forward L-I Characteristics, Tj=25 C UV/Royal blue/blue/cyan/green Red/Amber/Super red 6

8 Typical Forward I-V Characteristics, Tj=25 C UV/Royal blue/blue/cyan/green Amber / Red / Super Red 7

9 Recommended Soldering Profile The LEDs can be soldered using the parameters listed below. As a general guideline, the users are suggested to follow the recommended soldering profile provided by the manufacturer of the solder paste. Although the recommended soldering conditions are specified in the list, reflow soldering at the lowest possible temperature is advised for the LEDs. T Maximum Solder Profile Recommended Solder Profile 255 Minimum Solder Profile s min 30 s max +0-5 ± s max 100 s max Ramp Down -6 /s (max) Ramp Up 3 /s (max) Time (sec.) Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Average Ramp-up Rate (Ts max to Tp) 3 C /second max. 3 C /second max. Preheat - Temperature Min(Ts min ) 100 C 150 C - Temperature Max(Ts max ) 150 C 200 C - Time(ts min to ts max ) seconds seconds Time maintained above: - Temperature(T L ) 183 C 217 C - Time(t L ) seconds seconds Peak/classification 215 C 260 C Temperature(Tp) Time within 5 C of actual Peak Temperature(tp) seconds seconds Ramp-Down Rate 6 C /second max. 6 C /second max. Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. 8

10 Packing Information Max QTY: 2000ea / roll Trailer 160mm (min) of empty pockets sealed with tape Loaded Pockets Leader 400mm (min) of empty pockets sealed with tape Note: All dimensions are in millimeter. 9

11 About Us TSLC Corporation is devoted to developing high-density, and multi-size emitters with powerful output to satisfy the needs of every customer. TSLC Corporation is the leader in LED solutions. Unlimited design flexibility for interior and exterior spaces with high-end lighting effect; energy-efficient for UV curing to improve the quality of medical care; horticulture solutions create a better environment for everyone; high-intensity rotatable lightings for the entertainment industry, TSLC is always there for your lighting needs. For further company or product information, please visit us at or please contact sales@ tslc.com.tw. ASIA PACIFIC 3F-1, No.8, Xin An Road, Hsinchu, Science Park Hsinchu City Taiwan Tel: Fax: sales@tslc.com.tw 10