Power LED I TECHNICAL DATA

Transcription

1 Power LED I TECHNICAL DATA W11290 N11290 B11290 G11290 R11290 C11290 A , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 1

2 SPECIFICATIONS Features Super high flux output and high luminance Designed for high current operation Low thermal resistance RoHS Compliant Applications General Illumination Outdoor & Indoor architectural lighting Decorative lighting Torch lighting Portable lighting (Flash and lamp) and Reading lighting Traffic signaling Description ZPower series is designed for high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive large LCD backlights , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 2

3 Full Code explanation of ZPower LED series Full code form : X 1 X 2 X 3 X 4 X 5 X 6 X 7 X 8 X 9 X 10 X 11 X 12 X Part number X 1 : Color X 2 : ZPower LED series number X 3 : LENS type X 4 : Chip Quantity X 5 : Package outline size X 6 : Type of PCB 2. Internal Number X 7 X 8 3. Code Labeling X 9 : Luminous Flux (or Radiant Flux for Royal) X 10 X 11 X 12 : Dominant Wavelength (or x,y coordinates rank code) X 13 : Forward Voltage For more information about binning and labeling, refer to the Application Note , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 3

4 1. Outline Dimensions Cathode 9.8 (MAX) Cathode Mark Slug (+) Notes : 1. All dimensions are in millimeters. 2. Scale : none 3. This drawing is reference only for engineering 4. Slug of package is connected to anode , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09

5 Pure white Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Correlated Color Temperature [3] CCT 6500 K CRI R a 70 Forward Voltage [4] V F V View Angle 2Θ 1/2 70 deg. Thermal resistance [5] Rθ JB 6 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 3.2 W Junction Temperature T j 125 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. The chromaticity coordinate of the LEDs can shift approximately x=0.02, y=0.03 in the direction of blue 1000 hours later 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 5

6 Warm white Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Correlated Color Temperature [3] CCT 3000 K CRI R a 80 Forward Voltage [4] V F V View Angle 2Θ 1/2 70 deg. Thermal resistance [5] Rθ JB 6 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 3.2 W Junction Temperature T j 125 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. The chromaticity coordinate of the LEDs can shift approximately x=0.02, y=0.03 in the direction of blue 1000 hours later 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 6

7 Blue Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 40 deg. Thermal Resistance [5] Rθ JB 6 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 3.2 W Junction Temperature T j 125 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 7

8 Green Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 40 deg. Thermal Resistance [5] Rθ JB 6 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 3.2 W Junction Temperature T j 125 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution Please do not drive at rated current more than 5 sec. without proper heat sink 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 8

9 Red Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 40 deg. Thermal Resistance [5] Rθ JB 8 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 2.4 W Junction Temperature T j 100 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution Please do not drive at rated current more than 5 sec. without proper heat sink 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 9

10 Cyan Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 40 deg. Thermal Resistance [5] Rθ JB 6 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 3.2 W Junction Temperature T j 125 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution Please do not drive at rated current more than 5 sec. without proper heat sink 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 10

11 Amber Power LED 2. ElectroOptical Characteristics (at I F =700mA, T A =25) Min Typ Max Luminous Flux [1] Ф V [2] lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 40 deg. Thermal Resistance [5] Rθ JB 8 /W 3. Absolute Maximum Ratings (at T A =25) Forward Current I F A Power Dissipation P D 2.4 W Junction Temperature T j 100 Operating Temperature T opr 30 ~ +85 Storage Temperature T stg 40 ~ +120 ESD Sensitivity [6] ±20,000V HBM *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5] Rθ JB is measured with a SSC metal core pcb.(25 T J 110 ) Break voltage of Metal PCB is 6.5kVAC [6] It is included the zener chip to protect the product from ESD. Caution Please do not drive at rated current more than 5 sec. without proper heat sink 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 11

12 4. Forward Voltage vs. Forward Current (Ta=25 ) Forward Voltage(V) RED GREEN BLUE Forward Current(mA) 5. Forward Current vs. Normalized Relative Luminous Flux (Ta=25 ) Relative Luminous Flux(a.u) RED GREEN BLUE Forward Current(mA) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 12

13 6. White Color spectrum of Typical CCT (Ta=25 ) 1.0 Standard eye response curve Relative Spectral Power Distribution Wavelength (nm) 7. Warm White spectrum of Typical CCT (Ta=25 ) 1.0 Relative Spectral Power Distribution Wavelength (nm) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 13

14 8. Spectrum for Red, Green, Blue, Amber, Cyan (Ta=25 ) 1.0 Relative Spectral Power Distribution Wavelength (nm) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 14

15 9. Radiation pattern White Blue, Green, Red, Cyan, Amber With lens 70 With lens Relative intensity Relative intensity Directional angle[deg] Directional angle[deg] 10. Forward Current Vs Wavelength shift (Ta=25 ) Dominant wavelength shift(nm) RED GREEN BLUE Forward current(i F ) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 15

16 11. Temperature of Junction vs. Relative Light Output for Blue,Green,Red (Ta=25 ) 100 Relative Light Output (%) RED GREEN BLUE Junction Temperature ( o C) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 16

17 12. Ambient Temperature vs Allowable Forward Current for 2 chip White, Blue, Green, Cyan Current (ma) Rja T = 30 o C / W Rja T = 25 o C / W Rja T = 20 o C / W Ambient Temperature T A ( o C) 13. Ambient Temperature vs Allowable Forward Current for 2chip Red, Amber Current (ma) Rja T = 30 o C / W Rja T = 25 o C / W Rja T = 20 o C / W Ambient Temperature T A ( o C) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 17

18 14. Reel Packaging Dimensions(Rectangular type) MIN pitch cumlative tolerance on tape ±0.2 Cathode mark CENTER 5 TYPICAL Note : 1. Pocket numbers are 100 ea 2. All dimensions are in millimeters 3. Scale : none 4. This drawing is reference only engineering 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 18

19 15. Packaging structure Aluminum Vinyl Bag PART NO. : ######## QUANTITY : 750 LOT NO. : ########## BIN CODE NO. : ##### SEOUL SEMICONDUCTOR CO., LTD Outer Box TYPE SIZE(mm) a b c c Z POWER LED Z POWER LED a PART NO. : ######## ORDER CODE : ###### Q'YT : ###### DATE : ###### b SEOUL SEMICONDUCTOR CO.,LTD Note : 1. 5 reels are loaded in box 2. Scale none 3. This drawing is reference only engineering 4. For more information about binning and labeling, refer to the Application Note , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 19

20 16. Precaution for use (1) Storage Avoid the absorption of moisture, we recommended to store Z Power LEDs in a dry box (or desiccator) with a desiccant. Otherwise, store them in the following environment: Temperature : 5 ~30 Humidity : 50% max. (2) Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package (within 24Hrs). b. Keeping of a fraction Sealing Temperature : 5 ~ 40 Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 1012hr at 60±5. (3) Any mechanical force or any excess vibration shall not be applied to apply during cooling process to normal temp after soldering. (4) Avoid quick cooling (5) Components should not be mounted on warped direction of PCB. (6) Anti radioactive ray design is not considered for the products listed here in. (7) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (8) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA (Isopropyl Alcohol) should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moistureproof packing. (12) Repack unused products with antimoisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice. (14) The package with lens can NOT be solder reflowed. It will damage the lens. (15) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. (16) Slug polarity is anode , KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 20

21 17. Handling of silicone resin LEDs ZPower LED is encapsulated by silicone resin for the highest flux efficiency. Notes for handling of Silicone resin ZPower LEDs 1) Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers) 2) Avoid leaving fingerprints on silicone resin parts. 3) Dust sensitivity silicone resin need containers having cover for storage. 4) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. 5) Please do not force over 3000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product 6) Please do not recommend to cover the silicone resin of the LEDs with other resin (epoxy, urethane, etc) 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : FAX : Rev /09 21

22 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Seoul Semiconductor: A11290 B11290 G11290 R11290