Video signal switcher
|
|
- Jerome Hunt
- 6 years ago
- Views:
Transcription
1 Video signal switcher BA76N / BA76F The BA76N and BA76F are three-channel analog multiplexers with built-in mute, 6dB amplifier and 75Ω driver. The ICs designed for use in video cassette recorders, and feature a large dynamic range and wide operating frequency range. All inputs are terminated with 0kΩ (Typ.) input impedance. Applications Video cassette recorders and televisions Features ) -input / -output switches. ) Built-in 6dB amplifier and 75Ω driver. ) Built-in mute. ) Large input impedance (0kΩ Typ.). 5) Wide operating supply voltage range (.5V ~.0V BA76N) (.5V ~ 9.5V BA76F). 6) Low power dissipation (0mW Typ.). 7) Excellent frequency characteristics (0MHz, 0dB Typ.). 8) Wide dynamic range (.5VP-P Typ.). 9) Low interchannel crosstalk ( 65dB Typ., f =.MHz). Block diagram BA76N BA76F MUTE 6dB Amp 75Ω Driver IN MUTE 8 VOUT LA 6dB 75Ω 7 LOGIC LB LOGIC 6 IN IN 5 GND IN LA LB IN GND IN VOUT Truth table L A L B OUT L (OPEN) L (OPEN) IN L (OPEN) H IN H L (OPEN) IN H H MUTE
2 BA76N / BA76F Absolute maximum ratings (Ta = 5 C) Parameter Symbol Limits Unit Power supply voltage Power dissipation Operating temperature Storage temperature BA76N BA76F Reduced by 9mW for each increase in Ta of C over 5 C. Reduced by 5.5mW for each increase in Ta of C over 5 C..5 / 0.0 V Pd 900 / 550 mw Topr 5 ~ + 75 C Tstg 55 ~ + 5 C Electrical characteristics (unless otherwise noted, Ta = 5 C and = 5V) Parameter Symbol Min. Typ. Max. Unit Conditions Operating voltage range.5.0 V BA76F is Max.9.5V Supply current ICC ma Maximum output level Vom.0.5 VP-P f = khz, THD = 0.5% Voltage gain GV db f = MHz, VIN =.0VP-P Interchannel crosstalk 65 db f =.MHz, VIN =.0VP-P Frequency characteristic Cf db f = 0MHz / MHz, VIN =.0VP-P Input impedance ZIN 0 6 kω L pin switching level A VTH-A V L pin switching level B VTH-B V Not designed for radiation resistance.
3 BA76N / BA76F Measurement circuit MUTE 6dB Amp 75 Ω Driver 000µ + 75 V ~ P P Logic SW SW 7µF SW + A 0.0µF µf µf µf OSC OSC OSC ~ 50Ω ~ 50Ω ~ µf µf 50Ω µf SW SW5 Fig.
4 Measurement conditions Parameter Current dissipation Maximum output level Voltage gain Interchannel crosstalk Frequency characteristic L pin switching level IN IN IN IN IN IN IN IN IN IN IN MUTE IN IN IN MUTE IN MUTE IN IN IN La Lb Symbol SW SW SW SW SW5 ICC Vom Vom Vom GV GV GV Gf Gf Gf VTH VTH Switch settings BA76N / BA76F Measurement method Ammeter f = khz THD = 0.5% f = MHz, V = VP-P f =.MHz, V = VP-P f = 0MHz / f = MHz, V = VP-P 5 : Connect a distortion meter to the output, and input a f = khz sine wave. Adjust the input level until the output distortion is 0.5%. This output voltage at this time multiplied by is the maximum output level Vom (VP-P). : Input a VP-P, MHz sine wave. The voltage gain is given by GV = 0 log (VOUT / VIN) + 6. : Input a VP-P,.MHz sine wave. The interchannel crosstalk is given by = 0 log (VOUT / VIN). : Input VP-P, MHz and 0MHz sine waves. The frequency characteristic is given by Gf = 0 log (VOUT (f = 0MHz) / VOUT (f = MHz)). 5: Input a VP-P, MHz sine wave. Reduce the L pin voltage from. The L pin switching level (VTH) is the L pin voltage at which the VOUT level drops below 0mVP-P. Electrical characteristic curves OUTPUT VOLTAGE: VOUT (V) f = khz = V = 9V = 5V 5 6 INPUT VOLTAGE: VIN (V) Fig. VIN vs. VOUT caracteristics (f = khz) SIGNAL ATTENUATE LEVEL: (db) = 5V VIN = VP-P 00k M 0M 00M FREQUENCY: (Hz) Fig. Frequency characteristics SIGNAL ATTENUATE LEVEL: (db) k = 5V VIN = VP-P M 0M 00M FREQUENCY: (Hz) Fig. Interchannel crosstalk
5 BA76N / BA76F Operation notes The output impedance is approximately Ω. Therefore, to ensure output matching, connect an external resistor of Ω. External dimensions (Units: mm) BA76N BA76F 5.0 ± ± 0..8 ± ± ± 0..5 ± ± ± 0..5 ± 0.. ± ± ± 0. 0.Min. SIP8 SOP
6 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex (Item 6) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix-Rev.0
Video signal switcher
Video signal switcher BA76N / BA76F The BA76N and BA76F are three-channel analog multiplexers with built-in mute, 6dB amplifier and 7Ω driver. The ICs designed for use in video cassette recorders, and
More informationDual high slew rate operational amplifier
Dual high slew rate operational amplifier BA6 / BA6F / BA6N The BA6, BA6F, and BA6N are dual operational amplifiers which achieve approximately twice the high output current of the BA, as well as featuring
More informationQuad 2-channel analog multiplexer / demultiplexer
Quad 2-channel analog multiplexer / demultiplexer BU4B / BU4BF / BU4BF The BU4B, BU4BF, and BU4BF are multiplexers / demultiplexers capable of selecting and combining analog signals and digital signals
More informationQuad operational amplifier
Quad operational amplifier BA7 / BA7F The BA7 and BA7F are monolithic ICs with four operational amplifiers featuring internal phase compensation mounted on a single silicon chip. Either a dual or single
More informationDual comparators BA10393 / BA10393F / BA10393N. Standard ICs
Dual comparators BA9 / BA9F / BA9N The BA9, BA9F, and BA9N are dual comparators with open-collector output which allows wired OR connections. The operating power supply voltage ranges from to 6V for a
More information16-bit stereo D / A converter for audio applications
6-bit stereo D / A converter for audio applications The is a 6-bit stereo D / A converter designed for audio applications, and has an internal 2 oversampling circuit. Applications 6-bit stereo D / A converter
More informationQuad 2-input AND gate
Quad 2-input AND gate BU40B / BU40BF / BU40BF The BU40B, BU40BF, and BU40BF are dual-input positive-logic AND gates with four circuits mounted on a single chip. An inverter-type buffer is added to the
More informationHex Schmitt trigger BU4584B / BU4584BF / BU4584BFV. Standard ICs
Hex Schmitt trigger BU44B / BU44BF / BU44BF The BU44B, BU44BF, and BU44BF are inverter-type Schmitt trigger circuits, with six circuits mounted on a single chip. These are ideal when enhanced noise immunity
More informationQuad 2-input NAND Schmitt trigger
Quad 2-input NAND Schmitt trigger BU4093B / BU4093BF / BU4093BF The BU4093B, BU4093BF, and BU4093BF are 4-circuit, 2-input NAND gates whose input pins all have a Schmitt trigger function. As the circuit
More informationBA6840BFS / BA6840BFP-Y / BA6840BFP / BA6842BFS
3-phase motor driver BA6840BFS / BA6840BFP-Y / BA6840BFP / BA6842BFS The BA6840BFS, BA6840BFP-Y, BA6840BFP, and BA6842BFS are one-chip ICs designed for driving CD-ROM motors. They are high performance-ics
More informationInfrared light emitting diode, top view type
Infrared light emitting diode, top view type The has the response speed and luminous output necessary for image transmission in audio-visual applications. It can support almost all types of optical transmission
More informationFM / TV front end BA4424N. Audio ICs
FM / TV front end The is a monolithic IC designed for FM front end use. It consists of an RF amplifier circuit, mixer circuit, local oscillation circuit, IF buffer amplifier, and a variable capacitor-diode
More informationReversible motor driver
Reversible motor driver The BA6209 and BA6209N are reversible-motor drivers suitable for brush motors. Two logic inputs allow three output modes : forward, reverse, and braking. The motor revolving speed
More informationInfrared light emitting diode, top view type
Infrared light emitting diode, top view type The is a GaAs infrared light emitting diode housed in clear plastic. This device has a high luminous efficiency and a 9nm peak wavelength suitable for silicon
More informationDatasheetArchive.com. Request For Quotation
DatasheetArchive.com Request For Quotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
More informationBP5232A25/BP5232A33/BP5233A33/BP5234A33 Power Module BP5232A25 / BP5232A33 / BP5233A33 / BP5234A33
BP55/BP5/BP5/BP5 Power Module DC / DC converter BP55 / BP5 / BP5 / BP5 The BP55, BP5, BP5 and BP5 are DC / DC converters that use PWM system and FM system. They contain control circuits, switching devices
More informationHigh voltage, high current Darlington transistor array
BA2B / BA23B / BA23BF / BA24B High voltage, high current Darlington transistor array BA2B / BA23B / BA23BF / BA24B The BA2B, BA23B, BA23BF, and BA24B are high voltage, high current, high sustain voltage
More informationUNISONIC TECHNOLOGIES CO.,
M7 UNISONIECHNOLOGIES CO., VIDEO SIGNAL SWITCHER DESCRIPTION The UTC M7 is three-channel analog multiplexes and designed for use in TV and video cassette recorders. It is characterized by a large dynamic
More informationGeneral purpose(dual transistors)
General purpose(dual transistors) FMY FMY Features ) Both the SA4K and SC3906K chips in an SMT package. ) PNP and NPN chips are connecter in a common emitter. External dimensions (Unit : mm) SMT.9..9 0.9
More informationNew Designs. Not Recommended for. General purpose transistor (isolated transistor and diode) QSL11 QSL11. Transistors. Rev.A 1/4
General purpose transistor (isolated transistor and diode) A 2SB7 and a RB46F are housed independently in a TSMT5 package. Applications DC / DC converter Motor driver Features ) Tr : Low CE(sat) Di : Low
More informationGeneral purpose transistor (dual transistors)
General purpose transistor (dual transistors) Features 1) Both a SA37AK chip and SC41K chip in a EMT or UMT or SMT package. ) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3)
More informationSwitching ( 30V, 4.5A)
Switching ( 30V, 4.5) Features ) Low On-resistance. (57mΩ at 4.5V) 2) High Power Package. 3) High speed switching. 4) Low voltage drive. (4.5V) External dimensions (Unit : mm) SOP8 0.4 (8) (5) () (4).27
More informationDC-DC Converter ( 20V, 1.0A)
DC-DC Converter ( 20V,.0) Features ) Low on-resistance. (80mΩ at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V) pplications DC-DC converter External dimensions (Unit
More informationDC-DC Converter ( 20V, 4.0A)
DC-DC Converter ( 20V, 4.0)!Features ) Low on-resistance. (mω at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V)!External dimensions (Unit : mm) TSMT6 0.4 2.8.6 (3) ()
More informationIrDA Infrared communication Module
Photo Link Module IrDA Infrared communication Module is an infrared communication module for IrDA Ver. 1.2 (Low Power). The infrared LED, PIN photo diode, LSI are all integrated into a single package.
More informationSwitching ( 30V, 5.0A)
Switching ( 30V, 5.0) Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (SOP8). External dimensions (Unit : mm) SOP8 0.4 (8) (5) () (4).27 5.0 pplication
More informationNPN General Purpose Transistor
NPN General Purpose Transistor Features 1) BCEO < 45 (IC=1mA) 2) Complements the BC857B. External dimensions (Unit : mm) Package, marking, and Packaging specifications Part No. Packaging type SST3 Marking
More information4V Drive Nch MOS FET RHU002N06 RHU002N06. Transistors. Rev.B 1/4. External dimensions (Unit : mm) Structure Silicon N-channel MOS FET transistor
4 Drive Nch MOS FET Structure Silicon N-channel MOS FET traistor External dimeio (Unit : mm) UMT3 Features ) Low on-resistance. 2) High ESD. 3) High-speed switching. 4) Low-voltage drive (4). 5) Drive
More informationSwitching SP8M3 SP8M3. Transistors. External dimensions (Unit : mm)
Switching Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (SOP8). External dimensions (Unit : mm) SOP8 5.±.2 (5) (8) pplication Power switching, DC /
More information2.5V Drive Pch+Pch MOSFET
2.5V Drive Pch+Pch MOSFET Structure Silicon P-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Two Pch MOSFET transistors in a single TUMT6 package. 2) Mounting cost and area can be cut in half.
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (TSMT3). External dimensions (Unit : mm) TSMT3.0MX 2.9 0.85 0.4 0.7 (3) pplication
More informationSwitching (60V, 300mA)
Switching (60, 300mA)!Features ) Low on-resistance. 2) High ESD 3) High-speed switching. 4) Low-voltage drive (4). 5) Easily designed drive circuits. 6) Easy to use in parallel.!external dimeio (Units
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Structure Silicon P-channel MOS FET Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (TSMT3). External dimensions (Unit : mm) TSMT3
More information4V Drive Nch MOS FET RSS085N05 RSS085N05. Transistor 1/4. Structure Silicon N-channel MOS FET. External dimensions (Unit : mm)
4V Drive Nch MOS FET Sucture Silicon N-channel MOS FET External dimensions (Unit : mm) SOP8 5.0 0.4.75 Features ) Built-in G-S Protection Diode. 2) Small and Surface Mount Package (SOP8). (8) (5) () (4)
More information4V Drive Nch+SBD MOSFET
4 Drive Nch+SBD MOSFET Structure Silicon N-channel MOSFET / Schottky barrier diode Dimensions ( : mm) TUMT5 2. Features ) Nch MOSFET and schottky barrier diode are put in TUMT5 package. 2) High-speed switching,
More information2.5V Drive Nch+SBD MOSFET
2.5 Drive Nch+SBD MOSFET US5U US5U Structure Silicon N-channel MOSFET / Schottky barrier diode Dimensions ( : mm) TUMT5 2.0 Features ) Nch MOSFET and schottky barrier diode are put in TUMT5 package. 2)
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Structure Silicon P-channel MOS FET Features ) Low on-resistance. (90mΩ at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V) External dimensions
More informationCircuit protection elements
Circuit protection elements IC protector Circuit protection elements Rohm s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short
More informationPower Transistor (80V, 1A)
Power Transistor (80V, A) SD898 / SD733 / SD768S / SD863 SD898 / SD733 / SD768S / SD863!Features ) High VCEO, VCEO=80V ) High IC, IC=A (DC) 3) Good hfe linearity 4) Low VCE (sat) ) Complements the SB60
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA er..2 (Low Power). The infrared LED, PIN photo diode, and LSI are all integrated into one single package.
More informationIrDA Infrared Communication Module
Photo ink Module Infrared Communication Module is an infrared communication module for er. 1.2 (ow Power). The infrared ED, PIN photo diode, SI are all integrated into a single package. This module is
More informationNPN General Purpose Transistor
NPN General Purpose Transistor!Features 1) BCEO > 4 (IC = 1mA) 2) Complements the UMT39 / SST39 / MMST39 / 2N39.!External dimensions (Units : mm) UMT394 ROHM : UMT3 EIAJ : SC7 2.±.2 1.3±.1...3 1.2±.1 2.1±.1.9±.1.2.7±.1.1±.
More information4V+2.5V Drive Nch+Pch MOSFET
4V+2.5V Drive Nch+Pch MOSFET US6M US6M Sucture Silicon N-channel / P-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package
More informationVideo switch for CANAL-Plus decoder
Video switch for CANAL-Plus decoder The BA7630S and BA7630F are decoder switching ICs for the scrambled broadcasts in France. The ICs include a 3- input multiplexer, -input multiplexers with amplifiers,
More informationIrDA Infrared Communication Module
Photo ink Module Infrared Communication Module is an infrared communication module for er. 1.2 (ow Power). The infrared ED, PIN photo diode, SI are all integrated into a single package. This module is
More informationPower management (dual transistors)
Power management (dual transistors) 2SA208 and DTC44EE are housed independently in a UMT package. Application Power management circuit Dimensions (Units : mm) UMT6 Features ) Power switching circuit in
More informationAudio Accessory IC Series Ground Isolation Amplifier BA3121F, BA3123F Rev.A 1/8
Audio Accessory IC Series Ground Isolation Amplifier BA3121F, BA3123F No.09092EAT01 Description The BA3121F/BA3123F are ground isolation amplifiers developed for use in car audio applications. This IC
More information2.5V Drive Nch+Pch MOSFET
2.5V Drive Nch+Pch MOSFET Structure Silicon N-channel / P-channel MOSFET Dimensions (Unit : mm) TSMT6 Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (TSMT6).
More information4bit LVDS Receiver BU90LV048. LVDS Interface ICs
LVDS Interface ICs 4bit LVDS Receiver BU90LV048 Description LVDS Interface IC of ROHM "Serializer" "Deserializer" operate from 8MHz to 150MHz wide clock range, and number of bits range is from 35 to 70.
More informationVideo signal switcher for AV amplifiers
ideo signal switcher for A amplifiers BA765 The BA765 is a video signal switch that contains two five-channel analog multiplexers and wide-band 6dB amplifiers.it designed for use in video cassette recorders.
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA Ver. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into
More informationNPN Medium Power Transistor (Switching)
UMT2222A / SST2222A / Transistors NPN Medium Power Transistor (Switching) UMT2222A / SST2222A / Features 1) BCEO > 4 (IC=mA) 2) Complements the UMT297A / SST297A / MMST297A. Package, marking, and packaging
More information2.5V Drive Nch+Pch MOSFET
.V Drive Nch+Pch MOSFET EM6M EM6M Structure Silicon N-channel MOSFET / Silicon P-channel MOSFET Dimensions (Unit : mm) EMT6 Features ) Nch MOSFET and Pch MOSFET are put in EMT6 package. ) High-speed switching.
More information3 Dual operational amplifier with switch for car audio systems
1/4 Structure : Product : Type : Function : Silicon Monolithic Integrated Circuit 3 Dual operational amplifier with switch for car audio systems BA3131FS 1. High gain and low distortion. (Gv = 110dB, THD
More informationVideo Accessory ICs VCA for Video Signal Level Adjustment BA7655AF Rev.B 1/6
Video Accessory ICs VCA for Video Signal Level Adjustment BA7655AF No.11069EBT04 Description The BA7655AF is a VCA (Voltage Controlled Amplifier) IC that was developed for VCR, DVC, or other video signal
More informationBand-pass Filter for Spectrum Analyzer Indication
TECHNICAL NOTE Audio Accessory IC Series Band-pass Filter for Spectrum Analyzer Indication BA3835F, BA3830F, BA3834F Description As BA3835F, BA3830F, and BA3834F contain band pass filters for spectrum
More informationPower management (dual transistors)
Power management (dual transistors) SC8 and SK39 are housed independently in a UMT package. Application Power management circuit Dimensions (Units : mm) Features ) Power switching circuit in a single package.
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA Ver. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into
More information1.8V Drive Nch+Nch MOSFET
.8V Drive Nch+Nch MOSFET Structure Silicon N-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Two Nch MOSFETs are put in TUMT6 package. 2) High-speed switching, Low On-resistance. 3).8V drive. 0.2Max.
More informationBand-pass filter for spectrum analyzer for car audio systems BA3834F
1/4 Structure : Product : Type : Silicon Monolithic Integrated Circuit Band-pass filter for spectrum analyzer for car audio systems Function : 1. Built-in band pass filter for spectrum analyzer. is for
More informationIrDA Infrared Communication Module
IrDA Infrared Communication Module is an infrared communication module for IrDA er. 1.3 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into one single package.
More informationVocal fader IC BA3837 / BA3837F / BA3838F. Multimedia ICs
Vocal fader IC The BA3837, BA3837F and BA3838F are ICs with an internal secondary active LPF for vocal cancellation functions and mixing amplifier functions with high degrees of vocal cancellation. Three
More informationApplications Suitable for use where low power consumption and a high degree of noise tolerance are required. BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2
TECHNICAL NOTE General-purpose CMOS Logic IC Series (BUS Series) Single Gate CMOS Logic ICs BUSG, BUSG, BUSU9G, BUS7G, BUS8G, BUS8G Description The BUSxxxG are ch logic ICs encapsulated in
More informationSulfur Tolerant Chip Resistors
Sulfur Tolerant Chip Resistors (0603 size) Features 1) Unique protect materials prevent from silver sulfide occurrence under sulfur enviromnet. 2) Highly recommended for automotive, industrial and Power
More informationIrDA Infrared Communication Module
IrDA Infrared Communication Module RPM96-H7 RPM96-H7 RPM96-H7 is an infrared communication module for IrDA er. 1.3 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated
More informationNPN General Purpose Transistor
UMT39 / SST39 / MMST39 Transistors NPN General Purpose Transistor UMT39 / SST39 / MMST39 Features 1) BCEO > (IC = 1mA) 2) Complements the UMT39 / SST39 / MMST39. Dimensions (Unit : mm) UMT39 ROHM : UMT3
More informationPin 6 sink current. Pin 7 sink current
Ordering number : ENA LA9T Monolithic Linear IC Amplifier with Step Gain Control Overview The LA9T bipolar monolithic IC is an amplifier with driver amplifier for analog-to-digital converters. It is ideally
More informationUS6U37 Structure Dimensions TUMT6 for Features Applications Inner circuit Package specifications Designs Absolute maximum ratings Recommended New
2.5 Drive Nch+SBD MOSFET Structure Silicon N-channel MOSFET / Schottky barrier diode Features ) Nch MOSFET and schottky barrier diode are put in TUMT6 package. 2) High-speed switching, Low On-resistance.
More information2.5V Drive Nch+Pch MOSFET
2.5V Drive Nch+Pch MOSFET Sucture Silicon P-channel MOSFET Silicon N-channel MOSFET Dimensions (Unit : mm) TSMT6 Features ) The combines Pch MOSFET with a Nch MOSFET in a single TSMT6 package. 2) Low on-state
More informationClass-AB Speaker Amplifiers 5W+5W Stereo Speaker Amplifiers BA5406,BA Rev.C 1/10
Class-AB Speaker Amplifiers 5W+5W Stereo Speaker Amplifiers, No.77ECT02 Description The / is a dual OTL monolithic power IC with two built-in, high output speaker amplifier circuits. High output of 5W
More information1.5V Drive Nch MOSFET
.5V Drive Nch MOSFET Sucture Silicon N-channel MOSFET Dimensions (Unit : mm) TSMT3 Features ).5V drive 2) Low On-resistance. 3) Built-in G-S Protection Diode. 4) Small Surface Mount Package (TSMT3). pplication
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µpc1675g GENERAL PURPOSE WIDE BNAD AMPLIFIER DESCRIPTION The µpc1675g is a silicon monolithic integrated circuit employing small package (4pins mini mold) and
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA er. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into
More informationNTSC-PAL Audio I/O Interface for Recording/Playing BD3822FS, BD3824FS
TEHNIAL NOTE Video/Audio Interfaces for TV and DVD Recorders NTS-PAL Audio I/O Interface for Recording/Playing BD8FS, BD84FS Description BD8FS and BD84FS are the audio selectors with internal input selector,
More informationMonolithic Linear IC For Car Stereo 2-Channel Preamplifier
Ordering number : EN9G LA0 Monolithic Linear IC For Car Stereo -Channel Preamplifier Overview The LA0 is a -channel preamplifier for car stereo. Features Two preamplifiers on chip. Fewer peripheral parts.
More informationLA4805V. 3 V Stereo Headphone Power Amplifier
Ordering number : EN4469A Monolithic Linear IC LA4805V 3 V Stereo Headphone Power Amplifier Overview The LA4805V is a power IC developed for use in stereo headphones. It includes low frequency enhancement,
More informationDual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
More informationVCC 15.0 SCL, SDA 7.0
TECHNICAL NOTE Video / Audio Interfaces for TV and DVD Recorders NTSC-PAL Audio I/O Interface for Recording BD3823FV Description BD3823FV is a low-noise (3.2μVrms), low distortion (0.0015%), 5ch selector,
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µpc71, µpc7 GENERAL PURPOSE L-BAND DOWN CONVERTER ICs DESCRIPTION The µpc71/7 are Silicon monolithic ICs designed for L-band down converter. These ICs consist
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µpc326gr 5dB AGC AMP + VIDEO AMP DESCRIPTION The µpc326gr is Silicon monolithic IC designed for Digital DBS and Digital CATV receivers. This IC consists of
More informationFor Power Supply Applications. Switching Regulator Controller
FUJITSU SEMICONDUCTOR DATA SHEET DS04-27201-4E ASSP For Power Supply Applications Switching Regulator Controller MB3776A DESCRIPTION MB3776A is a PWM system switching regulator controller. Because of its
More informationVCR standard audio signal processor
VCR standard audio signal processor The BA7795LS and BA7795FS are standard audio signal processor ICs. They contain a playback preamplifier, line amplifier, recoeding amplifier, ALC circuit, EQ switch
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µpc4 LOW POWER QUAD OPERATIONAL AMPLIFIER DESCRIPTION The µpc4 is a quad operational amplifier which is designed to operate from a single power supply over
More informationunit: mm 3024A-SIP10H
Ordering number: ENN96 Monolithic Linear IC LA4 1 W -Channel Power Amplifier Overview The LA4 is a 1 W -channel power amplifier intended for televisions. This IC has a series of pin compatible monaural
More information2-channel PRE / REC amplifier with auto-tracking interface
-channel / REC amplifier with auto-tracking interface The is a / REC amplifier developed for use in video cassette recorders. It has been designed for use in two-head decks and features built-in FB damping,
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN752 Dual -W BTL audio power amplifier Overview The AN752 is an audio power amplifier IC for stereo system. The BTL (Balanced Transformer-Less) method can provide fewer external
More informationLA4629. Specifications. Monolithic Linear IC 2-channel AF Power Amplifier. Maximum Ratings at Ta = 25 C. Operating Conditions at Ta = 25 C
Ordering number : EN6A LA469 Monolithic Linear IC -channel AF Power Amplifier Overview The LA469 is a -channel power developed for use in radio/cassette player products. The LA469 reduces the number of
More informationDATA SHEET N-CHANNEL SILICON JUNCTION FIELD EFFECT TRANSISTOR FOR IMPEDANCE CONVERTER OF ECM
DATA SHEET JUNCTION FIELD EFFECT TRANSISTOR N-CHANNEL SILICON JUNCTION FIELD EFFECT TRANSISTOR FOR IMPEDANCE CONVERTER OF ECM DESCRIPTION The is suitable for converter of ECM. General-purpose product.
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN -W BTL audio power amplifier Overview The AN is an audio power amplifier IC with -ch output. The BTL (Balanced Transformer-Less) method can provide fewer external parts and
More informationUNISONIC TECHNOLOGIES CO., LTD M3368 Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD M3368 Preliminary LINEAR INTEGRATED CIRCUIT 3-INPUT IDEO SWITCH WITH 6dB AMPLIFIER DESCRIPTION SOP-8 The UTC M3368 is three input integrated video switch witch selects one
More informationMonolithic Linear IC Audio Output for TV application 5W 2ch Power Amplifier
Ordering number : ENA14 LA4 Monolithic Linear IC Audio Output for TV application W ch Power Amplifier Overview The LA4 is a W -channel power amplifier IC and optimal for use as the audio output power amplifier
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN74 Dual. Audio Power Amplifier Overview The AN74 is an integrated circuit designed for power amplifier of. (9V, 4Ω) output. Stereo operation is enabled due to incorporating two
More informationCXA1691AM/AS. FM/AM Radio. Description CXA1691AM/AS is a one-chip FM/AM radio IC designed for radio-cassette tape recorders.
/ Radio CXA69/AS Description CXA69/AS is a one-chip / radio IC designed for radio-cassette tape recorders. CXA69 CXA69AS 28 pin SOP (Plastic) 30 pin SDIP (Plastic) Features Small number of peripheral components.
More informationMonolithic Linear IC Audio Output for TV application 5W 2ch Power Amplifier
Ordering number : ENA4A LA4 Monolithic Linear IC Audio Output for TV application W ch Power Amplifier Overview LA4 is W -channel AF power amplifier intended for televisions. Functions W channels (, ) Standby
More informationMonolithic Linear IC For TV Audio/Video Switch
Ordering number : ENA1059A LA72730 Monolithic Linear IC For TV Audio/Video Switch Overview The LA72730 is an Audio/Video Switch for TV. Functions Audio : Possible to Change 4 Channel 2, ALC OUTPUT, 4dB
More informationTC75S55F, TC75S55FU, TC75S55FE
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TC7SF/FU/FE TC7SF, TC7SFU, TC7SFE Single Operational Amplifier The TC7SF/TC7SFU/TC7SFE is a CMOS singleoperation amplifier which incorporates a
More informationMaintenance/ Discontinued
ICs for / Tuner AN77, AN77S Tuner, / IF Amplifier Circuit Overview The AN77 and the AN77S are the ICs designed for Hi-Fi stereo tuner. They are functioned with stop signal pin besides the AN7S function.
More informationLA1837M. Specifications. Monolithic Linear IC Single-Chip AM/FM Tuner IC for Home Stereo Systems. Maximum Ratings at Ta = 25 C
Ordering number : EN8271 LA1837M Monolithic Linear IC Single-Chip AM/FM Tuner IC for Home Stereo Systems Overview The LA1837M is a single-chip AM/FM tuner IC that provides AM and FM IF and multiplex decoding
More informationLA4631. Functions 2-channel power amplifier for audio applications. Specifications
Ordering number : EN8B LA46 Monolithic Linear IC For Audio Applications W -Channel AF Power Amplifier Overview The LA46 (W channels) is a single-ended power amplifier that has a pin arrangement similar
More informationStereo Power Amplifier/Monaural BTL Power Amplifier. Power dissipation curve. Free air Ta-Ambient temperature ( C)
Stereo Power Amplifier/Monaural BTL Power Amplifier Description The is a bipolar IC developed as power amplifier for compact radio cassettes with built-in pre-amplifier and power amplifier electrical volume.
More information