SPECIFICATIONS PRODUCT :LCD MODULE MODEL NO.:G 興益科技股份有限公司 SHING YIH TECHNOLOGY CO., LTD. Control No.: TR-S-085 Version No.

Size: px

Start display at page:

Download "SPECIFICATIONS PRODUCT :LCD MODULE MODEL NO.:G 興益科技股份有限公司 SHING YIH TECHNOLOGY CO., LTD. Control No.: TR-S-085 Version No."

Wilfrid Horatio Stevens
6 years ago
Views:

1 Control No.: TR-S-085 Version No.: 1 SPECIFICATIONS :LCD MODULE :G CUSTOMER SHING YIH TECH. APPROVED CHECKED CHECKED APPROVED CHECKED PREPARED Kevin Mao Y. U. Tsai 興益科技股份有限公司

2 RECORDS OF REVISION G DATE REVISED REVISED DESCRIPTIONS PREPARED CHECKED APPROVED NEW ISSUE Y. U. Tsai Kevin Mao

3 G PAGE 1/14 CONTENTS 1. GERENAL SPECIFICATIONS FEATURES MECHANICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS LED BACKLIGHT OPTICAL CHARACTERISTICS TIMING CHARACTERISTICS PIN ASSIGNMENT PIN NO BLOCK DIAGRAM OUTLINE DIMENSION CODE SYSTEM OF ION LOT PRECAUTION FOR USE

4 G PAGE 2/14 1. GENERAL SPECIFICATIONS: 1-1 SCOPE: This specification covers the delivery requirements for the liquid crystal display delivered by SHING-YIH Technology to Customer 1-2 S: Liquid Crystal Display Module (LCM) 1-3 MODULE NAME: G FEATURES: 2-1 Display type: FSTN, Black& White, Transflective, 6O clock, Positive 2-2 Driving Method: 1/65 Duty,1/9 Bias 2-3 Built-in controller: TL0313_v00-5.5V 3. MACHANICAL SPECIFICATIONS: ITEMS SPECIFICATIONS UNIT OUTLINE DIMEMSIONS 72.0(W) x 76.0(H) x 5.1(T) mm ACTIVE AREA 61.41(W) x 30.69(H) mm VIEWING AREA 66.0(W) x 32.7(H) mm DISP. CONSTRUCTION 128 x 64 dots - NUMBER OF DOTS 128 x 64 Dots DOT SIZE 0.45(W) x 0.45(H) mm DOT PITCH 0.48(W) x 0.48(H) mm ASSY. TYPE COG - BACKLIGHT Light Guide + LED Light Bar - WEIGHT About 25.0 g

5 G PAGE 3/14 4. ABSOLUTE MAXIMUM RATING ITEM SYMBOL CONDITION STANDARD VALUE MIN TYP MAX UNIT POWER SUPPLY FOR LOGIC - Ta= V POWER SUPPLY FOR LCD DRIVING VLCD Ta= V INPUT VOLTAGE VIN Ta= V OPERATION TEMPERATURE TOPR STORAGE TEMPERATURE TSTG NOTE : LCM SHOULD BE GROUNDED DURING HANDLING LCM 5. ELECTRICAL CHARACTERISTICS ( Ta=25 ) POWER SUPPLY VOLTAGE ITEM SYMBOL CONDITION - 2x booster circuit 3x booster circuit 4x booster circuit STANDARD VALUE MIN TYP MAX POWER SUPPLY FOR LCD DRIVING VLCD Ta= V V INPUT VOLTAGE H LEVEL VIH V INPUT VOLTAGE L LEVEL VIL V OUTPUT VOLTAGE H LEVEL VOH IOH=-0.5mA V OUTPUT VOLTAGE L LEVEL VOL IOL=0.5mA V UNIT V POWER SUPPLY CURRENT IDD ma IEE ma

6 G PAGE 4/15 6. LED BACKLIGHT 6-1 POWER SUPPLY FOR LED BACKLIGHT RL=22 A LED BACKLIGHT VLED +5.0V(Typ.) K 6-2 ABSOLUTE MAXIMUN RATING PARAMETER SYMBOL YELLOW GREEN MIN TYP MAX UNIT POWER DISSIPATION PAD 65 mw FORWARD CURRENT IAF 25 ma REVERSE VOLTAGE VR 5 V OPERATION TEMPERATURE TOPR STORAGE TEMPERATURE TSTG ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL LIGHT SOURCE CONDITION STANDARD VALUE MIN TYP MAX UNIT FORWARD VOLTAGE LUMINOUS INTENSITY PEAK EMISSION WAVELENGTH SPECTRUM RADIATION BANDWIDTH REVERSE CURRENT Vf Iv λp λ IR YELLOW GREEN YELLOW GREEN YELLOW GREEN YELLOW GREEN YELLOW GREEN If=20mA V 13 cd/m 2 If=80mA 570 nm 30 nm Vr=8V 0.2 ma

7 G PAGE 5/14 7. OPTICAL CHARACTERISTICS ITEM SYMBOL CONDITION MIN TYP MAX UNIT NOTE VIEWING ANGLE θ1 Cr θ2,θ3,θ4 Vop=9.8V 30 Deg (1) CONTRAST RATIO Cr Vop=9.8V 5 8 (2) RESPONSE TIME (rise) Tr θ1= 0 θ2= ms (3) RESPONSE TIME (fall) Tf θ1= 0 θ2= ms (3) (1) DEFINITION OF VIEWING ANGLE θ1,ψ= 0 θ2,ψ= 180 θ4,ψ=270 θ3,ψ= 90 Y(Rear) Y X X X (Left) X(Right) LCD Y (Front) LCD Y View Direction View Direction Contrast Ratio Cr 2 θ1< <θ2 θ1 θ2 θ Front-Rear Viewing Angle Contrast Ratio Cr 2 θ3< <θ4 θ3 θ4 θ Right-Left Viewing Angle (2) DEFINITION OF CONTRAST RATIO (3) DEFINITION OF RESPONSE TIME Brightness of non-selected segment (B2) C.R = Brightness of selected segment (B1) Brightness curve of selected segment B2 Brightness curve of non-selected segment B1 Operating voltage (Vop) Brightness(%) NON SELECTIVE State Selective State BRIGHTNESS 100% 90% tr (RISE TIME) NON SELECTIVE State tf 10% (FALL TIME) SHING YIH TECHNOLOGY CO., LTD

8 G PAGE 6/14 (4)Measuring Instruments For Electro-optical Characteristics NORMAL LIGHT SOURCE (BM-7 φ=3.0mm) PHOTO-METER (*1) θ0 θ θ0 θ=30 LCD PANEL (*2) *1.Light source position for measuring the reflective type of LCD panel *2.Light source position for measuring the transflective / transmissive types of LCD panel

9 G PAGE 7/14 8. TIMING CHARACTERISTICS 8-1 Parallel TIMING CHARACTERISTICS (=2.7V~3.6V, Ta=-40 to +85 ) ITEM SYMBOL MIN. TYP. MAX. UNIT ADDRESS SETUP TIME tas68 13 ns ADDRESS HOLD TIME tah68 17 ns SYSTEM CYCLE TIME tcy ns DATA SETUP TIME tds68 35 ns DATA HOLD TIME tdh68 13 ns ACCESS TIME tacc ns OOUTPUT DISABLE TIME tod ns ENABLE PULSE READ tpw68(w) 125 ns WIDTH WRITE tpw68(r) 55 ns (=3.6V~5.5V, Ta=-40 to +85 ) ITEM SYMBOL MIN. TYP. MAX. UNIT ADDRESS SETUP TIME tas68 10 ns ADDRESS HOLD TIME tah68 10 ns SYSTEM CYCLE TIME tcy ns DATA SETUP TIME tds68 18 ns DATA HOLD TIME tdh68 10 ns ACCESS TIME tacc68 65 ns OOUTPUT DISABLE TIME tod ns ENABLE PULSE READ tpw68(w) ns WIDTH WRITE tpw68(r) ns RS tas68 tah68 /CS1 (CS2=1) tpw68(r), tpw68(w) tcy68 E tds68 tdh68 DB0 to DB7 (Write) tacc68 tod68 DB0 to DB7 (Read) Figure 1. Parallel 6800-series interface Timing Characteristics SHING YIH TECHNOLOGY CO., LTD

10 G PAGE 8/ Parallel TIMING CHARACTERISTICS (=2.4V~3.6V, Ta=-40 to +85 ) ITEM SYMBOL MIN. TYP. MAX. UNIT ADDRESS SETUP TIME tas80 13 ns ADDRESS HOLD TIME tah80 17 ns SYSTEM CYCLE TIME tcy ns PULSE WIDTH (WR) tpw80(w) 55 ns PULSE WIDTH (RD) tpw80(r) 125 ns DATA SETUP TIME tds80 35 ns DATA HOLD TIME tdh80 13 ns READ ACCESS TIME tacc ns OUTPUT DISABLE TIME tod ns (=3.6V~5.5V, Ta=-40 to +85 ) ITEM SYMBOL MIN. TYP. MAX. UNIT ADDRESS SETUP TIME tas80 10 ns ADDRESS HOLD TIME tah80 10 ns SYSTEM CYCLE TIME tcy ns PULSE WIDTH (WR) tpw80(w) 65 ns PULSE WIDTH (RD) tpw80(r) 25 ns DATA SETUP TIME tds80 18 ns DATA HOLD TIME tdh80 10 ns READ ACCESS TIME tacc80 65 ns OUTPUT DISABLE TIME tod ns RS tas80 tah80 /CS1 (CS2=1) /RD, /WR 0.9 tpw80(r), tpw80(w) 0.1 tcy80 tds80 tdh80 DB0 to DB7 (Write) tacc80 tod80 DB0 to DB7 (Read) Figure 2. Parallel 8080-series interface Timing Characteristics SHING YIH TECHNOLOGY CO., LTD

11 G PAGE 9/ SERIAL -TIMING CHARACTERISTICS (=2.7V~3.6V, Ta=-40 to +85 ) ITEM SYMBOL MIN TYP MAX UNIT SERIAL CLOCK CYCLE tcys ns SCLK HIGH PULSE WIDTH twhs ns SCLK LOW PULSE WIDTH twls ns ADDRESS SETUP TIME tass ns ADDRESS HOLD TIME tahs ns DATA SET-UP TIME tdss ns DATA HOLD TIME tdhs ns /CS1 SETUP TIME tcss ns /CS1 HOLD TIME tchs ns (=3.6V~5.5V, Ta=-40 to +85 ) ITEM SYMBOL MIN TYP MAX UNIT SERIAL CLOCK CYCLE tcys ns SCLK HIGH PULSE WIDTH twhs ns SCLK LOW PULSE WIDTH twls ns ADDRESS SETUP TIME tass ns ADDRESS HOLD TIME tahs ns DATA SET-UP TIME tdss ns DATA HOLD TIME tdhs ns /CS1 SETUP TIME tcss ns /CS1 HOLD TIME tchs ns /CS1 (CS2=1) tcss tchs tass tahs RS DB6 (SCLK) tcys twls tdss tdhs twhs DB7 (SID) Figure 3.Serial interface Timing Characteristics SHING YIH TECHNOLOGY CO., LTD

12 9. PIN ASSIGNMENT G PAGE 10/14 PIN FUNCTION SYMBOL 1 Ground 2 LCD driver supply voltage V4 3 LCD driver supply voltage V3 4 LCD driver supply voltage V2 5 LCD driver supply voltage V1 6 LCD driver supply voltage V0 7 Capacitor2- connect for internal voltage converter C2-8 Capacitor2+ connect for internal voltage converter C2+ 9 Capacitor1- connect for internal voltage converter C1-10 Capacitor1+ connect for internal voltage converter C1+ 11 Capacitor3- connect for internal voltage converter C3-12 Capacitor3+ connect for internal voltage converter C3+ 13 Voltage converter output VOUT 14 Power Supply for Logic 15 Ground Parallel/Serial data input select input, H: Parallel type L: Serial type Microprocessor interface selects input pin, H: 6800 type L: 8080 type 18 Data bus or Serial input data DB7 (SID) 19 Data bus or Serial input clock DB6 (SCLK) PS C68 20 Data bus DB5 21 Data bus DB4 22 Data bus DB3 23 Data bus DB2 24 Data bus DB1 25 Data bus DB type: Read signal 6800 type: Enable signal 8080 type: Write signal 6800 type: Read/Write execution control pin Register Select input, H: display data L: control data E(RD) R/W(WR) 29 Hardware reset input /RESET 30 Chip Select inputs /CS1 RS

13 G PAGE 11/ PIN NO K A Silicon BLOCK DIAGRAM COM0 COM31 LCD PANEL COM32 COM32 SEG0 128x64 DOTS COM63 SEG127 SEG128 COM32 IC:TL0313_v00-5.5V V4 V3 V2 V1 V0 C2- C2+ C1- C1+ C3- C3+ VOUT PS C68 DB7~DB0 RD(E) WR(R/W) RS RESET CS1

14 DSEL0 DSEL1 VOUT COM56 COM57 COM54 COM5 COM52 COM53 COM51 COM50 COM48 COM49 COM46 COM47 COM45 COM43 COM4 COM41 COM42 COM40 COM39 COM37 COM38 COM36 COM34 COM35 COM32 COM3 (0,0) COM25 COM24 COM23 COM2 COM21 COM20 COM19 COM18 COM17 COM16 COM15 COM14 COM13 COM12 COM1 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1 COMS COM58 COM59 COM60 COM61 COM62 COM63 COMS SEG131 SEG0 COM30 COM31 COM29 COM28 COM27 COM26 COM STANDARD G PAGE 12/14 12.OUTLINE DIMENSION 3.00± ± ± 0.30 K ± 0.30 Light Guide Viewing Direction (6 O'clock) Silicon TL0313A (TOMATO) Light Bar Shielding Tape FPC Stiffener 0.30± 0.05 A Conductive side (Uncover area is plated with gold) 3.00± ± 0.20 (LCD + L/G) ± MAX (2.00) (2.295) 46.00± 0.30 (13.65) 8.00MAX 72.00± ± 0.20 (LCD Size) 0.70± ± 0.07 (LCD Size) (LCD Size) 0.48 Note : 1.General Tolerance : ± 0.20 mm 2. Unit : mm Double-Side Adhesive Tape 70.00± 0.30(LCD Size) 66.00± 0.20(Viewing Area) 61.41± 0.10(Active Area) (35.00) "A" FRS M DISPCL /RESET CS2 /CS1 RS RW_/WR E_/RD DB0 DB2 DB1 DB3 DB4 DB6 DB5 DB7 NC0 NC1 C68 CLSMS PS VOUT VOUT VOUT C3+ C3+ C3- C3+ C3- C3- C1+ C1+ C1- C1+ C2+ C1- C1- C2+ C2+ C2- C2- C2- VR V0 VR V1 V0 V2 V1 V3 V2 V4 V3 V4 /DC5 HPM INTRS TEST1 TEST0 TEST3 TEST2 TEST5 TEST4 TEST7 TEST6 TEST9 TEST8 TEST10 TEST11 TEST13 TEST12 TEST15 TEST14 TEST18 TEST17 TEST16 TEST20 TEST19 HT0313A K A Silicon (2-R0.75) 30 1 S=0.15± 0.10 W=0.35± 0.10 P0.50x(30-1)=14.50± ± ± ± 0.30 LCD Light Guide Light Bar (17.65) (1.005) 30.69± 0.10(Active Area) (1.30) 32.70± 0.20(Viewing Area) 35.30± ± ± 0.30(LCD Size) 30.00± 0.50

15 G PAGE 13/ Code System of Production Lot The production lot of module is specified on the back of PWB as follows; Production Inspection-line of shifts Production Year Production Bonding-line of shifts Production Day(least two digits) Production Month (1~9, X, Y, Z) 14. Precaution for Use The following precautions should be followed, since this module contains precise parts. (1) Do not store module for an extended periods of time under the conditions of high temperature and high humidity. (2) Avoid using or storing the module in areas that expose it to direct sunlight or ultraviolet rays. (3) Use protective finger covers when handling the module to avoid scratching or staining the module. (4) Care should be taken not to expose the module to static electricity, because the module contains C-MOS LSI s. (5) The LSI is sensitive to light. The user s product should be designed so that LSI is not exposed to any light during operation. (6) During installation, cover the display area with acrylic protection plates to protect the polarizer plate and LCD cells. (7) Do not apply any excessive shocks to the module because the module contains sensitive LCD cells. Do not use a module which has experienced strong mechanical shock. (8) Care should be taken when the power supply turns on as following. (a) Do not apply any input signals before the supplying voltage is applied. (b)do not turn off the power supply while any input signals are applied.

16 G PAGE 14/14 Caution (1) Dangerous. Do not shock glass because glass can break. (2) If module breaks, do not touch it directly. (Glass could stick or cut skin.) (3) Do not swallow Liquid Crystal. (In case of broken LCD panel, do not swallow liquid crystal even if there is no proof that liquid crystal is poisonous.) (4) If liquid crystal is exposed to skin, wash the area thoroughly with alcohol or soap. (5) When disposing of the product, please observe industrial waste disposal laws in each country and district. (6) In case of injury, give immediate treatment and consult with a doctor. (7) This product is constructed precisely. Don t disassemble or modify. Neglecting this mark can cause injury to humans and damage to materials.

Item Symbol Condition Min. Typ. Max. Unit Power Supply for Logic Power Supply for LCD Drive. Input Voltage

Item Symbol Condition Min. Typ. Max. Unit Power Supply for Logic Power Supply for LCD Drive. Input Voltage 6 FSTN LCD Module The display is a compact, full dot matrix, which is an STN gray positive LCD type, transflective rear polarizer with a yellow green backlight color. The AND3222MST- W can display TEXT