TECH. CORP. SPECIFICATIONS : CDE012 : PE24064WRM-001CL1Q (VER.0) Customer Approved. Approved QC Confirmed Designer

Size: px

Start display at page:

Download "TECH. CORP. SPECIFICATIONS : CDE012 : PE24064WRM-001CL1Q (VER.0) Customer Approved. Approved QC Confirmed Designer"

Dustin Andrews
6 years ago
Views:

1 TECH. CORP. SPECIFICATIONS CUSTOMER : CDE012 SAMPLE CODE (Ver.) : MASS PRODUCTION CODE (Ver.) : PE24064WRM-001CL1Q (VER.0) DRAWING NO. (Ver.) : DMD (Ver.A) Customer Approved Date: Approved QC Confirmed Designer Approval For Specifications Only. * This specification is subject to change without notice. Please contact Powertip or it s representative before designing your product based on this specification. Approval For Specifications and Sample. Headquarters: POWERTIP TECH. CORP. No.8, 6 th Road, Taichung Industrial Park, Taichung, Taiwan 台中市 407 工業區六路 8 號 TEL: FAX: sales@powertip.com.tw PS NO.PT-A-005-7

2 History of Version Date Ver. Description Page Design by 2007/07/12 0 MASS PRODUCTION - FU Total : 27 Page Page2

3 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 1.7 Other Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix:LCM Drawing Packaging Note : For detailed information please refer to IC data sheet : EPSON S1D10605D03B000 Page3

4 1. SPECIFICATIONS 1.1 Features Item Display Type LCD Type Driver Condition Viewing Direction Backlight Type Weight Interface Standard Value 240 * 64 Dots STN Blue, Negative, Transmissive LCD Module: 1/65 Duty, 1/7 Bias 6 O clock LED B/L 43.3 g Serial data input Controller / Driver IC S1E10605D03B000 * 2 ROHS 1.2 Mechanical Specifications THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : Item Standard Value Unit Outline Dimension 120.0(L) * (w) * 5.7 (H)(Max) mm Viewing Area (L) * (w) mm Active Area (L) * (w) mm Dot Size 0.39 (L) * 0.39(w) mm Dot Pitch 0.41(L) * 0.41(w) mm Note : For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage V DD V LCD Driver Supply Voltage V5,VOUT V Operating Temperature T OP C Storage Temperature T ST C Storage Humidity H D Ta < 60 C - 90 %RH Page4

5 1.4 DC Electrical Characteristics V DD = 3.0 V ± 0.3, V SS = 0 V, Ta = 25 C Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage V DD V H Input Voltage V IH - 0.8V DD - V DD V L Input Voltage V IL - V SS - 0.2V DD V H Output Voltage V OH - 0.8V DD - V DD V L Output Voltage V OL - V SS - 0.2V DD V Supply Current I DD VDD= 3.0 V;VOP=9.1V; Pattern= Vertical line ma VDD= 3.0 V;VOP= 9.1V; Pattern= Horizontal line* ma (-20 C) LCM Driver Voltage V OP (+25 C) * V (+70 C) NOTE: *1 The Maximum current display *2 The VOP test point is VDD~VOUT 1.5 Optical Characteristics LCD Panel: 1/65 Duty, 1/7 Bias, V LCD = 9.1 V, Ta = 25 C Item Symbol Conditions Min. Typ. Max. Reference View Angle θ C>2.0, = Note 1 Contrast Ratio CR θ = +5, = Note 3 Response Time(rise) Tr θ = +5, = 0-160ms 240ms Response Time(fall) Tf θ = +5, = 0-140ms 210ms Note 2 Page5

6 Note 1. Optical characteristics-2 Viewing angle Top (θ=0 ) Rear (12H) φ=90 θl θr θ+ Left (9H) φ=180 θ- Right (3H) φ=0 Front (6H) φ=270 Viewing angle Page6

7 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform Selected waveform No selected waveform Transmittance 100% % 90% 10% Tr Tf Negative Type No selected waveform Transmittance Selected waveform No selected waveform 100% 90% 10% Tr Tf Page7

8 Electrical characteristics-2 2 Drive waveform Vop: Drive voltage ff: Frame frequency 1/B: Bias fd: Drive frequency N: Duty (1) Selected waveform 1 V o Vop/B 2 3 N Vop/B V o 1/fF 1/fD (2) Non- Selected wave form N (1-2/B)Vop Vop/B (1-2/B)Vop Vop/B Vop/ B 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period Page8

9 Note 3. : Definition of Vth Transmittanc e 100 % 73% Selected waveform No selected waveform 50% Vth1 Vth2 Drive View direction Drive waveform Transmittance Active voltage range Vth1 10 (Selected waveform) 50% Vth2 40 (No selected waveform) 73% 1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System θ Photo Detector Human Eye Active Temperatur e Control Chamber 正讀 LCD Panel Transmissive ψ Measuring System: Autronic DMS-803 Page9

10 1.6 Backlight Characteristics LCD Module with LED Backlight Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25-60 ma Reverse Voltage VR Ta =25-5 V Electrical / Optical Characteristics Ta =25 Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF IF= 40 ma V Reverse Current IR VR =5 V ma Average Brightness (with LCD) Uniformity (With LCD) *1 CIE Color Coordinate (With LCD) Color IV cd/m 2 IF= 40 ma B % X IF= 40 ma - Y white 1 B=B(min) / B(max)*100% A R1 R2 LED1 LED2 K Page10

11 2. MODULE STRUCTURE 2.1 Counter Drawing LCM Mechanical Diagram * See Appendix Block Diagram Page11

12 2.2 Interface Pin Description NO SYMBOL FUNCTION 1 /RES When RES is set to LOW, the settings are initialized The reset operation is performed by the RES signal level. 2 /CSA /CSA=LOW : control Master driver's 3 /CSB /CSB=LOW : control Slave driver's 4 A0 5 SCL This is connect the least significant bit of the normal MPU address bus, and it determines whether the data bits are data bits are data or a command. A0=HIGH: Indicates that D0 to D7 are display data. A0=LOW: Indicates that D0 to D7 are control data. 6 SI 7 VDD Shared with the MPU power supply terminal VCC. 8 VSS This is a 0V terminal connected to system GND. 9 VOUT 10 CAP3-11 CAP1+ 12 CAP1-13 CAP2-14 CAP2+ 15 V1 16 V2 17 V3 18 V4 19 V5 DC/DC voltage converter. Connect a capacitor between this terminal and VSS. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1+ terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1- terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1+ terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2+ terminal. DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2- terminal. This is a multi-evel power supply for the liquid crystal drive. The voltage applied is determined by the liquid crystal cell, and is changed through the use of a resistive voltage divided or through changing the impedance using an op. amp. Voltage levels are determined based on VDD, and must maintain the relative magnitudes show below. Page12

13 NO SYMBOL FUNCTION 20 VR Output voltage regulator terminal. Provides the voltage between VDD and V5 through a resistive voltage divider. These are only enabled when the V5 voltage regulator internal resistors are not used (IRS=LOW). These cannot be used when the V5 voltage regulator internal resistors are used(irs=high). 21 IRS 22 NC NC Page13

14 2.3 Timing Characteristics Page14

15 Page15

16 2.4 Display Command Page16

17 Page17

18 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales R&D Q.A Manufactur ing Product control Purchase Inventory control Marketing & Design Info Request Survey Inquiry Project evaluation NG Project Validation Quote OK Contract Design check Sample Approval NG Sample test NG Verification OK Sample approval OK Pilot Run & Mass Product NG Pilot run & Reliability test Verification OK Specification preparation Mass production OK Inspection NG Ship Out Shipment Ship out Page18

19 Item Customer Sales R&D Q.A Manufactu ring Product control Purchase Inventory control Info Claim Sales Service Analysis report Failure analysis Corrective action Tracking Q.A Activity 1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management Page19

20 3.2 Inspection Specification Page20

21 Page21

22 Page22

23 Page23

24 Page24

25 Page25

26 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 2 High Temperature Storage Test Low Temperature Storage Test Keep in +80 ±2 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test 4 ESD Test 5 Temperature Cycling Storage Test 6 Vibration Test (Packaged) Keep in +60 / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) Air Discharge: Apply 2 KV with 5 times Discharge for each polarity +/- Contact Discharge: Apply 250 V with 5 times discharge for each polarity +/- 1. Temperature ambiance : Humidity relative : 30% 60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 1. Sine wave Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X Y Z) duration for 2 Hrs 7 Drop Test (Packaged) Packing Weight Drop Height (cm) (Kg) 0 ~ ~ ~ Over Drop direction : 1 corner / 3 edges / 6 sides each 1times Page26

27 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING Avoid any strong mechanical shock which can break the glass Avoid static electricity which can damage the CMOS LSI When working with the module, be sure to ground your body and any electrical equipment you may be using Do not remove the panel or frame from the module The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch, push or rub the exposed polarizing with anything harder than an HB pencil lead (glass, tweezers, etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate Do not touch the display area with bare hands, this will stain the display area Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent To control temperature and time of soldering is 320 ± 10 C and 3-5 sec To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE Store the panel or module in a dark place where the temperature is 25 C ± 5 C and the humidity is below 65% RH Do not place the module near organics solvents or corrosive gases Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions Unaccepted responsibility This product has been manufactured to your company s specification as a part for use in your company s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. Page27

28 st 久正光電股份有限公司圖面名稱圖面編號

History of Version. Date. Ver. Edi. Description Page Design by. 01/22/ New Drawing - 徐明菲. 03/07/ New Sample - 徐明菲

History of Version. Date. Ver. Edi. Description Page Design by. 01/22/ New Drawing - 徐明菲. 03/07/ New Sample - 徐明菲 TECH. CORP. SPECIFICATIONS CUSTOMER : CKR001 SAMPLE CODE : SE9665WRF-002-I08Q MASS PRODUCTION CODE : PE9665WRF-002-I08Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : JLMD- PE9665WRF-002-I08Q