State of the Art, Inc.
|
|
|
- Rachel Campbell
- 6 years ago
- Views:
Transcription
1 State of the Art, Inc Fox Hill Road, State College, PA USA tel: (814) fax: (814) Restriction on Hazardous Substances (RoHS) The latest revision of the European Union s RoHS legislation 1 prohibits the sale of products that contain more than 0.01% cadmium and 0.1% by weight lead, mercury, chromium (VI), polybrominated biphenyls, and/or polybrominated diphenylethers unless an end use exemption is granted. State of the Art, Inc. (SOTA) products may contain lead or cadmium and may not comply with RoHS. Several codes in our part number indicate the product s RoHS status. Examples of our part number formats are shown below. Semi-precision thick film chip resistors: S1206CPX1000F10, S1206CPY102G30 Precision thin film chip resistors: S1206CA1000FEB, S0303AS1000FKW Zero ohm chip resistors (jumpers): S0402CPX000 Chip attenuators: S0303AC10B0B, S0706CW6B0B, S1512CT3B0BN7 MIL-PRF chip resistors: M55342K06B100BR, D55342K07W100DT MIL-PRF zero ohm chip resistors: M32159C12M, M32159B06T. MIL-PRF-914 surface mount resistor networks: M914D04K1002FMM Surface mount resistor networks: SJCB20L1001FA, SD1516K1001FB. The part number codes that determine RoHS status are identified for each product type and part number format. 1 Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) Page 1 of 7 10 March 2017
2 Semi-Precision Thick Film Chip Resistors SOTA s semi-precision thick film resistors contain lead in a glass of these electrical components which is an exempt application. 2 These resistors may also contain lead or cadmium in other portions of the device and may not comply with RoHS. RoHS status is determined by the product and termination finish codes in the part number. S1206CPX1001F10 S1206CPX101G10 Product codes B and R (high power resistors) may comply with RoHS depending upon the termination finish. codes V, X, Y, and Z contain cadmium oxide and do not comply with RoHS. code G complies with RoHS. Product codes P, F, V, H, K, and U may comply with RoHS depending upon the termination finish. codes X, N, and K do not comply with RoHS due to their 60/40 tin Termination finish code P contains cadmium oxide and does not comply with RoHS. codes Z, Y, V, M, C, and G comply with RoHS. Page 2 of 7
3 Precision Thin Film Chip Resistors SOTA s precision thin film resistors may contain lead and may not comply with RoHS. RoHS status is determined by the termination finish code in the part number. S1206CA1001FEB codes B and K do not comply with RoHS due to the 60/40 tin codes Y, V, M, W, and A comply with RoHS. Precision Thin Film Silicon Resistors State of the Art, Inc. (SOTA) precision thin film silicon resistors comply with RoHS. Silicon resistors are identified by the product code S in the part number. S0303AS1001FEW All precision thin film resistors on silicon are ROHS complaint. Page 3 of 7
4 Zero Ohm Chip Resistors (Jumpers) Zero ohm chip resistors are made using thick film materials containing lead in a glass of these electrical components. 2 These resistors may also contain lead or cadmium in other portions of the device and may not be RoHS compliant. RoHS status is determined by the termination finish codes in the part number. S1206CPX000 codes X, N, and K do not comply with RoHS due to their 60/40 tin code P contains cadmium oxide and does not comply with RoHS. codes Z, Y, V, M, C, and G comply with RoHS. Page 4 of 7
5 Fixed Chip Attenuators State of the Art, Inc. (SOTA) fixed chip attenuator products with product codes W and D contain lead in a glass of these electrical components. 2 Fixed attenuator products with product codes C, M, & G do not need this exemption. Fixed chip attenuators may also contain lead in other portions of the device and may not comply with RoHS. RoHS status is determined by the termination finish code in the part number. S1512AC3B0B Attenuation Value codes B and K do not comply with RoHS due to the 60/40 tin codes Y, V, M, and W comply with RoHS. Temperature Variable Attenuators Temperature variable attenuators (product code T) contain lead in a glass of these electrical components 2 and may also contain lead in other portions of the device. RoHS status is determined by the termination finish code in the part number. S1512AT3B0BN7 TCA Attenuation Value codes B and K do not comply with RoHS due to the 60/40 tin codes Y, V, M, and W comply with RoHS. Page 5 of 7
6 MIL-PRF Chip Resistors MIL-PRF chip resistors may contain lead and may not be RoHS compliant. State of the Art, Inc. (SOTA) semi-precision thick film resistors contain lead in a glass of these electrical components. 2 SOTA precision thin film devices (E & H temperature characteristics and/or <1% tolerance) do not contain lead in the glass. RoHS status is determined by the termination material code in the part number: M55342K06B100ES Product Level Value ( & Multiplier) Termination Material Slash Sheet Temperature Characteristic Specification Reference Termination Material code B does not comply with RoHS due to the 60/40 tin Termination Material code U does not comply with RoHS due to the presence of cadmium. Termination Material codes C, G,and W comply with RoHS. MIL-PRF Zero Ohm Chip Resistors MIL-PRF zero ohm chip resistors contain lead in a glass of these electrical components 2 and may contain lead in the termination finish. RoHS status is determined by the termination material code in the part number: M32159B06M Product Level Slash Sheet Termination Material Specification Reference Termination Material code B does not comply with RoHS due to the 60/40 tin Termination Material code U does not comply with RoHS due to the presence of cadmium. Termination Material codes C, G, and W comply with RoHS. Page 6 of 7
7 MIL-PRF-914 Surface Mount Resistor Networks State of the Art, Inc. (SOTA) surface mount resistor networks do not comply with RoHS due to the lead in the 60/40 tin These resistor networks are made using thick film materials that contain lead in a glass of the electrical components. 2 M914D04K1002FMM Surface Mount Resistor Networks State of the Art, Inc. (SOTA) surface mount resistor networks do not comply with RoHS due to the lead in the 60/40 tin These resistor networks are made using thick film materials that contain lead in a glass of the electrical components. 2 SJCB20L1001GA SD1516L1001FA Product Level Schematic Case Code Termination Material Specification Reference Schematic Total I/O Count Package Size Schematic Total I/O Count Package Size Page 7 of 7
State of the Art, Inc.
State of the Art, Inc. 2470 Fox Hill Road, State College, PA 16803-1797 USA tel: (814)355-8004 fax: (814)355-2711 www.resistor.com REACH 1 State of the Art, Inc. produces various resistor products classified
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
BRIDGELUX BLUE POWER DIE BXDA 40 mil x 40 mil
PRODUCT DATA SHEET DS-C28 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation flip chip technology delivers
BRIDGELUX BLUE POWER DIE BXDA 26 mil x 30 mil
PRODUCT DATA SHEET DS-C34 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation flip chip technology delivers
BRIDGELUX BLUE POWER DIE BXCD 10 mil x 29 mil
PRODUCT DATA SHEET DS-C36 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers
BRIDGELUX BLUE POWER DIE BXCD 45 x 45
PRODUCT DATA SHEET DS-C15 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
BRIDGELUX BLUE POWER DIE BXCD 26 mil x 30 mil
PRODUCT DATA SHEET DS-C30 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers
BRIDGELUX BLUE POWER DIE BXCD 26 mil x 30 mil
PRODUCT DATA SHEET DS-C30 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers
TECHNICAL SPECIFICATIONS PP1 Series
TECHNICAL SPECIFICATIONS Series Specifications Series Revision B Page: 1 / 10 1.0 SCOPE This specification describes the operating parameters, testing requirements, approvals, materials, and part numbering
3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
Agilent 1GG Packaged 13.5 GHz GaAs Diode Limiter
Agilent 1GG5-8205 Packaged GaAs Diode Limiter TC626P Data Sheet Features ESD Protection: 3000V Human Body Model Insertion Loss: 1.0 db Typ. Port Match: S 11 and S 22 15 db Typ. Power Handling: P 1dB 25
INSTRUCTIONS MODEL AVX-TFR-STUD TEST JIG FOR USE WITH AVTECH AVR-EBF6-B FORWARD RECOVERY TEST SYSTEMS SERIAL NUMBER:
AVTECH ELECTROSYSTEMS N A N O S E C O N D P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 W A V E F O R M E L E C T R O NI C S S I N C E 1 9 7 5 TEL: 888-670-8729 (USA & Canada) or +1-613-686-6675 (Intl)
Data Sheet AMMC KHz 80 GHz TWA. Description. Features. Typical Performance (Vd=5V, Idsq=0.1A) Component Image.
AMMC-525 3KHz 8 GHz TWA Data Sheet Description The AMMC-525 MMIC is a 3KHz to 8GHz ultra broadband traveling wave amplifier. In this operational frequency band, AMMC-525 provides 8dB gain with better than
Table 1: Pb-free solder alloys of the SnAgCu family
Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should
Alternative Colored Glass Alternative Filters Filters
Alternative Filters Newport's Colored-Glass Alternative (CGA) Filters Newport's patent pending Colored-Glass Alternative (CGA) filters were developed to provide solutions for applications requiring long
Executive Summary. Industry urges the Technical Adaptation Committee (TAC), as a matter of utmost priority, to:
AeA Europe-EICTA-ESIA-JBCE-CECED-Orgalime Guidance on the implementation of Directive 2002/95/EC on the Restrictions on the Use of Certain Hazardous Substances in electrical and electronic equipment (RoHS)
INSTRUCTIONS MODEL AVX-S1-P0D-MS1A PLUG-IN SOCKET OUTPUT MODULE SERIAL NUMBER:
A V T E C H E L E C T R O S Y S T E M S L T D. N A N O S E C O N D W A V E F O R M E L E C T R O N I C S S I N C E 1 9 7 5 P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 TEL: 888-670-8729 (USA & Canada)
AM3089 Filter Bank. Description. Functional Diagram. Features. Characteristic Performance. Analog Tunable 2.0 to 18.0 GHz Bandpass
Insertion Loss (db) AM3089 Filter Bank Description AM3089 is an analog voltage-tunable bandpass filter bank covering the 2.0 to 18.0 GHz frequency range. Six bandpass filters with SP6T switches on the
Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type
GP2Y0A41SK0F Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type Description GP2Y0A41SK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
FrelTec GmbH. Thin Film Chip Resistor SMD Precision (1% to 0,1%) Low TCR (10, 15, 25 and 50 ppm)
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thin Film Chip Resistor SMD Precision (1% to 0,1%) Low TCR (10, 15, 25 and 50 ppm) 8/31/2011 1/15 Freltec GmbH www.freltec.com SPECIFICATION Part Number 030
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
The SCX18.S provides dual high power regulators capable of supplying 3A to the connected servos from an external Li-Pol or
18 Channel Servo Driver Shield for Arduino and Raspberry-PI Designer Systems PRODUCT DESIGN AND MANUFACTURING.co.uk Technical Data Features Arduino TM UNO Shield standard form factor for simple integration
State of the Art, Inc Fox Hill Road, State College, PA USA tel: (814) fax: (814)
Temperature Variable Attenuators Temperature variable attenuators (TVAs) decrease attenuation with increasing ambient temperature. TVAs passively compensate temperature sensitive components without generating
3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires
DATA SHEET Thick Film Chip Resistor RC (RoHS Compliant & Halogen Free) YAGEO CORPORATION
DATA SHEET Thick Film Chip Resistor RC 01005 (RoHS Compliant & Halogen Free) YAGEO CORPORATION 350, Zhongzheng Rd., Dashe Shiang, Kaohsiung 815, Taiwan Tel: 88-7-351-4117 Fax: 88-7-351-2075 Headquarters:
Thin Film Mini-MELF Resistors
FEATURES Advanced thin film technology AEC-Q2 qualified Low TCR and tight tolerances Excellent stability in different environmental conditions Pure tin termination on nickel barrier, plated on press fit
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
FrelTec GmbH POWER ZENER DIODE SMB
GmbH Mathildenstr. 10A 82319 Starnberg Germany SM 10/4/2014 1/12 GmbH www.freltec.com SM SPECIFICATION 603 1SM5927x SMx E03 Type Type Package Packing 603: ZENER DIODE 1SM5913x 1SM5914x 1SM5915x 1SM5916x
Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS)
MEMO/08/763 Brussels, 3 December 2008 Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS) What is RoHS about? The
Power Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 5 W to 50 W High power rating Manufactured in cermet thick film technology, these power resistors exhibit remarkable characteristics
Chip Resistors & Arrays
Chip Resistors & Arrays Chip Resistors & Arrays Overview POWER RATING (WATTS) AND AVAILABLE SIZES PER PRODUCT SERIES Type Series 01005 0201 0402 0603 0805 1206 2010 2512 0612 Thick Film CR (AS, PF) General
Power Resistors for Mounting onto a Heatsink Thick Film Technology
Power Resistors for Mounting onto a Heatsink Thick Film Technology FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046 to 1 M Non inductive Easy mounting Low thermal
Cree EZ700-p LEDs Data Sheet (Anode-up) CxxxEZ700-Sxxx00-x
Cree EZ7-p LEDs Data Sheet (Anode-up) CxxxEZ7-Sxxx-x Cree s EZBright LEDs are the latest generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree s proprietary optical
Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network
MPM (Divider) Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network MPM Series Dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability
FrelTec GmbH. Switch Diode SOD323
GmbH Mathildenstr. 10A 82319 Starnberg Germany SOD323 11/22/2015 1/10 GmbH www.freltec.com SPECIFICATION 611 BAV WSxxx SOD323 E03 Type Type Package Packing 611: BAV WSxxx SOD323 E03: Embossed tape and
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification October 02, 2017 V.6 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free SR SERIES 0402/0603/005/1206/1210/121/2010/2512
Ceramic Sandwich, Single-In-Line Thin Film Resistor, Through Hole Network (Low Profile 0.20 Custom)
CS Ceramic Sandwich, Single-In-Line Thin Film Resistor, Through Hole Network (Low Profile 0.20 Custom) Actual Size presents a design concept in precision thin film resistor networks. The essence of this
DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification September 27, 201 V.7 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free Product specification
Part No. Data Rate Media type Distance
SFP+ Direct Attach: 1m, 2m, 3m RoHS6 Compliant Features Support Multi-Gigabit data rates up to 10.5Gbps Hot-pluggable SFP 20PIN footprint I/O Connector designed for high speed differential signal application
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1218 5%, 1% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 121 5%, 1% RoHS compliant Product specification Jul 15, 200 V.2 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 121
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1% RoHS compliant
100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 15, 200 V.3 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
DATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/0805/1206/0815/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/005/1206/015/2010/2512 RoHS compliant & Halogen free Product specification Product specification 2 PT-High
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0402 5%, 1% RoHS compliant Product specification Jul 15, 200 V.3 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 0402
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZB-XXX-04C Flexible cable enables moving head applications. Mates to popular M MDR 26 position receptacle
COTS EMI FILTER -500V
Passive Filter Half-Brick MILITARY COTS EMI FILTER -500V to +500V 9A 80mΩ @ 100 C >80dB @ 250kHz Continuous Input Output Current Max. DC Resistance Differential Attenuation FULL POWER OPERATION: -55ºC
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2 0 0 2 / 9 5 / E C r e q u i r e m e n t restricting the use of Lead (Pb), Mercury (Hg),
The RoHS Recast Directive 2011/65/EU
The RoHS Recast Directive Edition 2 updated: November 2015 Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Introduction... 3 Background...
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0201 5%, 1% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0201 5%, 1% RoHS compliant Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 0201 series chip resistors
Surface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to
Thin Film Chip Resistors with Established Reliability
FEATURES Approved to EN 140401-801, version E Established reliability, failure rate level E6 Advanced thin film technology Pure Sn termination on Ni barrier layer Single lot date code Material categorization:
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R) 5%, 1% sizes
120 DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R) 5%, 1% sizes 4 0603 RoHS compliant Product specification ate of Mar. 06, 2003 Product specification 2 SCOPE This specification describes YC164 (convex)
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
FELICIA ED 2C RGB. Super high Flux output and high Luminance RGB LED Module
FELICIA ED FELICIA ED 2C RGB Super high Flux output and high Luminance RGB LED Module Page 2 of 16 Pages for reference: Pages for reference:... 2 Introduction... 3 Short form Characteristics... 4 Dimensions
High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip
High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of frequencies.
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
Surface Mounted Power Resistor Thick Film Technology
Surface Mounted Power Resistor Thick Film Technology DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 25 W at 25 C case temperature Surface mounted resistor - TO-252 (DPAK) style package Wide resistance
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%, 0.5%, 0.1% Product specification June 25, 2014 V.5. RoHS compliant
Product specification June 25, 2014 V.5 1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 SCOPE This specification describes 1206 series chip
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 01,, 05 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings
Resistor Chip General Information
Resistor Chip General Information Ordering Information - Global part number Ordering information - Global part number - Single resistor RC 0603 J R 07 10R (L) Series name (code 1~2) RC = General purpose
DATA SHEET GENERAL PURPOSE CHIP RESISTORS. RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen free Product specification January 21, 2015
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification June 07, 2017 V.0 Product specification 2 SCOPE This specification
Thick Film Chip Resistors Product Specification
1/21 1 Scope This specification is applicable to lead and halogen free RTT series thick film chip resistors. 2 Explanation Of Part Numbers (EX) RTT 03 101 J TP Type Nominal Resistance Resistance Size Tolerance
A practical Guide to understanding the specific obligations of
ORGALIME RoHS GUIDE A practical Guide to understanding the specific obligations of recast Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in EEE (RoHS II) July 2011 Last
MA4P T. Quad PIN Diode π Attenuator MHz. M/A-COM Products Rev. V2. Features. Functional Schematic. Description.
1-4 MHz Features 4 PIN diodes in a SOT-2 Plastic Package Externally Selectable Bias and RF Matching Network 1 4, MHz Useable Frequency Band + 43 IP3 @ ( Ω) 1. db Loss @ ( Ω) 3 db Attenuation @ ( Ω) Lead-Free
5 V AGC AMPLIFIER + VIDEO AMPLIFIER
5 V AGC AMPLIFIER + VIDEO AMPLIFIER UPC327GV UPC328GV FEATURES ON-CHIP LOW DISTORTION AMPLIFIER: IIP3 = -4 dbm at minimuim gain WIDE AGC DYNAMIC RANGE: GCR = 53 db TYP ON-CHIP VIDEO AMPLIFIER: VOUT =.25
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5%, 0.1% Product specification July 01, 2014 V.5 Supersedes Date of Mar.
Product specification July 01, 2014 V.5 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0603 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 hahah SCOPE This specification
2018 Liquid Solder Flux RoHS Product Certificate of Compliance
2018 Liquid Solder Flux RoHS Product Certificate of Compliance All Lead-Free Solder products meet the requirements of the following RoHS standards: EU Directive 2015/863 of 31 March 2015, amending Annex
Metal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
Product specification December 12, 2018 V. DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
Product specification July, 2017 V.8 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen free Product
Introduction. Attenuators
Introduction Attenuators Features Lead Free, RoHS Compliant Option Available Substrates - BeO, AlN or Alumina Power Rating -.05 to 400 Watts Frequency Range DC to 6 GHz Package styles: chip, tab & cover,
Output Input Efficiency PARD (mvp-p) Vin Nom. (V)
Features: Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 94% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
MADR TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.
Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound
TAT7457-EB. CATV 75 Ω phemt Adjustable Gain RF Amplifier. Applications. Ordering Information
Applications Single-ended and Push-pull Optical Receivers Low-noise Drop Amplifiers Distribution Amplifiers Multi-Dwelling Units Single-ended Gain Block SOT-89 package Product Features Functional Block
Data Sheet. AMMC GHz 1W Power Amplifier. Features. Description. Applications
AMMC-648 6-18 GHz 1W Power Amplifier Data Sheet Chip Size: 2 x 2 µm (78.5 x 78.5 mils) Chip Size Tolerance: ± 1 µm (±.4 mils) Chip Thickness: 1 ± 1 µm (4 ±.4 mils) Pad Dimensions: 1 x 1 µm (4 ±.4 mils)
Product Specification
PRODUCT FEATURES Product Specification 25G SFPwire, SFP+ Active Optical Cable FCBG125SD1Cxx Hot-pluggable SFP+ cable ends Supports 25.7813 Gb/s bit rate SFI limiting interface Input equalization and output
Preliminary. LED Driver. Xitanium SR 75W A 54V SR XI075C200V054VPT1
LED Driver Xitanium SR 75W 0.10-2.0A 54V SR XI075C200V054VPT1 Specifications Input Voltage (Vrms) Output Power (W) Output Voltage (V) Output (A) Efficiency @ Max Load Max. The Xitanium SR LED Driver can
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%
1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 02, 200 V.4 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%
1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 02, 200 V.4 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
50W TO220 High Power Resistors
50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal
Logic C1 TTL Buffer Level Shifter. Logic C2. Logic C3. Logic C4
Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4 mm, 20-lead PQFN Package 100% Matte
± 2.5g Tri-axis Analog Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2.5g (24.5 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
Professional Thin Film Chip Resistor Array
FEATURES Advanced thin film technology Two pairs or four equal resistor values TCR down to ± 25 ppm/k Tolerance down to ± 0.5 % Pure Sn termination on Ni barrier layer Compliant to RoHS directive 2002/95/EC
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5% RoHS compliant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0603 5%, 1%, 0.5% RoHS compliant Product specification February 05, 2013 V.6 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification
DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
Product specification May 25, 2015 V.4 DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/1206/ 12/1218/20/2512 RoHS compliant & Halogen free Product
± 2g Tri-axis Analog Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
The Recast RoHS Directive 2011/65/EU
Eva-Helena Ouchterlony Head of Chemistry, Health and Environmental Services - Intertek Sweden Intertek Italia Via Principe di Udine, 114-33030 Campoformido (UD) info.etls-italy@intertek.com www.intertek.it
Metal Film Resistors, Military, MIL-R Qualified, Precision, Type RN and MIL-PRF Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer