3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX
|
|
|
- Dennis Ball
- 5 years ago
- Views:
Transcription
1 3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires Double overall shield with inner foil and outer braid Rugged ribbon contact type EMI shielded cable assembly For use as bulkhead feed through or extension cable See regulatory information appendix (RIA) for chemical compliance information Date Modified: December 10, 2007 TS-2128-C Sheet 1 of 3 Physical Connector Contact Plating: Wiping Area: 30 μ [ 0.76 μm ] Min Gold Underplating: 100 μ [ 2.55 μm ] Nickel Shell Options: Color: Silver ( MDR), Black (SDR) Material: Polyvinyl Chloride (SDR) Metal Plated Polyester Elastomer (MDR) Cable: Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Marking: 3M Logo Electrical Voltage Rating: 30 V Current Rating: 0.5 A Insulation Resistance: Withstanding Voltage: Ω min at 100 V DC 125 V AC RMS for 1 minute Environmental Temperature Rating: 0 C to +70 C UL File No.: E86982 Camera Link is a certification mark of Automated Imaging Association. 3M Interconnect Solutions For technical, sales or ordering information call
2 3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX High Density MDR Female Receptacle 26 Position LENGTH (See ordering information) Cable (See pinout for cable construction) High Density SDR Male Plug 26 Position X M2.0 Thumbscrew Figure 1 MDR Receptacle To SDR Plug Bulkhead Cable Assembly Figure 2 - SDR Plug Pinout mm [Inch] Tolerance Unless Noted mm 0.0 ± ±.10 [ ] Dimensions for Reference only Figure 3 MDR Receptacle Pinout TS-2128-C Sheet 2 of 3 3M Interconnect Solutions For technical, sales or ordering information call
3 3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX CN-1 Conn. Pos. Base Configuration Full / Medium configuration Cable CN-2 Conn. Pos. 25 CC4- Z3+ Z3+ CC4-25 TWINAX 1 12 CC4+ Z3- Z3- CC CC3+ Zclk+ Zclk+ CC3+ 24 TWINAX 2 11 CC3- Zclk- Zclk- CC CC2- Z2+ Z2+ CC2-23 TWINAX 3 10 CC2+ Z2- Z2- CC CC1+ Z1+ Z1+ CC1+ 22 TWINAX 4 9 CC1- Z1- Z1- CC Ser TFG+ ZO+ ZO+ Ser TFG+ 21 TWINAX 5 8 Ser TFG- ZO- ZO- Ser TFG Ser TC- Terminated Terminated Ser TC- 20 TWINAX 6 7 Ser TC+ 100 ohm 100 ohm Ser TC X3+ Y3+ Y3+ X3+ 19 TWINAX 7 6 X3- Y3- Y3- X XC+ Yclk+ Yclk+ XC+ 18 TWINAX 8 5 XC- Yclk- Yclk- XC X2+ Y2+ Y2+ X2+ 17 TWINAX 9 4 X2- Y2- Y2- X X1+ Y1+ Y1+ X1+ 16 TWINAX 10 3 X1- Y1- Y1- X XO+ YO+ YO+ XO+ 15 TWINAX 11 2 XO- YO- YO- XO DRAIN WIRE Shell BRAID Shell Cable Assembly Wiring Diagram Table 1 Ordering Information 1MG26-LFW0-00C-XXX (RIA E1 & C1 apply) Length: 100 = 1m 200 = 2m 500 = 5m A00 = 10m Reference notes 1 & 2 for cable length tolerance Notes: 1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm 2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length 3M Interconnect Solutions TS-2128-C Sheet 3 of 3 For technical, sales or ordering information call
4 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product is RoHS Compliant 2005/95/EC. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M s best knowledge and belief based upon information provided by third party suppliers to 3M. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. RIA-2217B-c
5 Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information Appendix C2: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M s Regulatory Information Appendix, then 3M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c
6 Appendix C3: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M s Regulatory Information Appendix, then 3M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-c
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires
3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving
3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZB-XXX-04C Flexible cable enables moving head applications. Mates to popular M MDR 26 position receptacle
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC
M Cable Assembly Supports Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36
PRODUCT SPECIFICATION 3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36 PS-0082 Rev. B Page 1 of 8 3M 2012. All rights Reserved Table of Contents Section Content Page Cover page 1 Contents
Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.:
Product Specification. 3M Cable Assemblies for QSFP+ FDR Applications, Copper
78-5102-0198-7 A Product Specification 3M Cable Assemblies for QSFP+ FDR Applications, Copper Document Number: 78-5102-0198-7 A Issue Date: Jul 04, 2014 Subject: 3M Cable Assemblies for QSFP+ FDR Applications
3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised
Page 1 of 7 Product Specification 78-5102-0099-7 Revised 11-16-11 Contents Title Page and Contents......................................................... 1 1.0 Scope....................................................................
Product Data Sheet. 3M SFP+ Direct-Attach Passive Copper Cable Assembly
78-512-114-4 E Product Data Sheet 3M SFP+ Direct-Attach Passive Copper Cable Assembly 3Electronics Materials Solutions Division 681 River Place Blvd. Austin, TX 78726-9 http://www.3m.com/interconnects
3M Electrically Conductive Double-Sided Nonwoven Tape 9750
Technical Data October 2013 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Product Description 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 is an isotropically electrical conductive
3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions Contents 1.0 Purpose....................................... 1 2.0 Development Kits..................................
Product Data Sheet. 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper
78-512-114-4 D Product Data Sheet 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper Subject: 3M Cable Assemblies for SFP+ Applications Page: 1 of 14 Table of Contents 1. SCOPE...
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723
Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically
Signal Integrity Test Report
PD-0098 Signal Integrity Test Report 3M External MiniSAS Cable Assemblies 3 Electronic Solutions Division Subject: 3M External MiniSAS Cable Assembly Page: 1 of 14 Table of Contents 1.0 Scope... 2 2.0
3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
Signal Integrity Product Specification
PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 178-025-613R571 0.03540 Environment
TABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 179-015-413R491 0.02620 Environment
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 General Description: PTZ (CCTV+Control+Power) Cable, Rated-CM, 1-RG59 20 AWG solid bare copper with foam polyolefin, 95% bare copper braid, 1-22 AWG stranded
HEAVY DUTY COPPER CABLE LUGS
Industrial products we wholesale, you distribute (SEAMLESS TUBULAR) (TIN PLATED) (SEAMLESS TUBULAR) (NON-PLATED) UL LISTED 4909 Rondo Drive, Fort Worth, Texas 76106, USA Telephone: 1-877-732-0342 Fax:
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
Executive Summary. Industry urges the Technical Adaptation Committee (TAC), as a matter of utmost priority, to:
AeA Europe-EICTA-ESIA-JBCE-CECED-Orgalime Guidance on the implementation of Directive 2002/95/EC on the Restrictions on the Use of Certain Hazardous Substances in electrical and electronic equipment (RoHS)
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
3M Dynatel Triple Play Customer Service Test Set INS970
3M Dynatel Triple Play Customer Service Test Set Advanced Diagnostics Software Options DELT, SELT and Spectral Analysis The Test Set has the ability to run advanced diagnostics in different scenarios to
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
TECHNICAL SPECIFICATIONS PP1 Series
TECHNICAL SPECIFICATIONS Series Specifications Series Revision B Page: 1 / 10 1.0 SCOPE This specification describes the operating parameters, testing requirements, approvals, materials, and part numbering
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
INSTRUCTIONS MODEL AVX-S1-P0D-MS1A PLUG-IN SOCKET OUTPUT MODULE SERIAL NUMBER:
A V T E C H E L E C T R O S Y S T E M S L T D. N A N O S E C O N D W A V E F O R M E L E C T R O N I C S S I N C E 1 9 7 5 P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 TEL: 888-670-8729 (USA & Canada)
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Coax (2-1505A Type) 20 AWG BC, GIFPE isulation, Duofoil plus TC braid (95% cv.), PVC inner jackets. Pairs (4-9451 Type): 22 AWG TC, PP insul.,
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3 Instructions October 2013 3 1.0 Table of contents 1.0 Summary...3 2.0 Cable and Fiber Preparation...4
INSTRUCTIONS MODEL AVX-TFR-STUD TEST JIG FOR USE WITH AVTECH AVR-EBF6-B FORWARD RECOVERY TEST SYSTEMS SERIAL NUMBER:
AVTECH ELECTROSYSTEMS N A N O S E C O N D P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 W A V E F O R M E L E C T R O NI C S S I N C E 1 9 7 5 TEL: 888-670-8729 (USA & Canada) or +1-613-686-6675 (Intl)
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July 2011 3 Contents 1.0 General... 3 2.0 Cabinet Overall Description... 3 3.0 Tools Required... 4 4.0 Kit Contents...
IN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS
FEATURES NEC's φ50 µm InGaAs APD IN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS SMALL DARK CURRENT: ID = 7 na HIGH SENSITIVITY: S = 0.94 A/W at λ = 0 nm, M = S = 0.96 A/W at λ = 550 nm, M = HIGH SPEED RESPONSE:
MINI-SAS HIGH DENSITY
MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity s (TE s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount
2018 Liquid Solder Flux RoHS Product Certificate of Compliance
2018 Liquid Solder Flux RoHS Product Certificate of Compliance All Lead-Free Solder products meet the requirements of the following RoHS standards: EU Directive 2015/863 of 31 March 2015, amending Annex
Table 1: Pb-free solder alloys of the SnAgCu family
Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Banana Peel Composite - (2) Cat 5e 4-pair 24 AWG unshielded plus (2) Series 6 Coax with Duobond IV Quad shield, polyolefin insulation on the
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
Thin Film Rectangular Chip Resistors
www.vishay.com,,, Thin Film Rectangular Chip Resistors FEATURES Metal film layer on high quality ceramic Protective top coat Pure tin on nickel barrier layer Low temperature coefficient and tight tolerances
3M Dynatel Far End Device III
3M Dynatel Far End Device III User s Guide PAIR 1 GND CO PAIR 2 F1 F2 STATUS Dynatel Far End Device III 1 1/2 0 Future-Proof Testing Platform February 2009 78-8140-2657-7-A 3 2 3M Dynatel Far End Device
PRELIMINARY DATA SHEET. NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE WITH DRIVER FOR 10 Gb/s APPLICATIONS
PRELIMINARY DATA SHEET FEATURES NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE WITH DRIVER FOR 10 Gb/s APPLICATIONS INTEGRATED ELECTROABSORPTION MODULATOR INTERNAL DRIVER IC UP TO 40
3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
PT480FE0000F. Phototransistor PT480FE0000F. Features. Agency Approvals/Compliance. Applications
Phototransistor Features 1. Side view detection type 2. Plastic mold with resin lens 3. Narrow directivity angle 4. Visible light cut-off resin 5. Lead free and RoHS directive component Agency Approvals/Compliance
Metal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
1 310 nm FOR 156 Mb/s, 622 Mb/s, 1.25 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE
DESCRIPTION LASER DIODE 0 nm FOR 56 Mb/s, 6 Mb/s,.5 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE The is a 0 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-. These
DF-LDL2-41X16. CCS Inc Copyright(c) 2009 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited.
DF-LDL-41X1 Third Angle Projection Units: mm 4 8.4 (3.). Copyright(c) 09 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited. CCS Inc. Common Specifications LED color
ACT-IR220L/LE IrDA Serial Port Adapter
ACT-IR220L/LE IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
SignalSure 250. High power SMD solution AUTOMOTIVE. SignalSure 250 is a compact, surface-mount, high power LED signaling
AUTOMOTIVE SignalSure 250 High power SMD solution SignalSure 250 is a compact, surface-mount, high power LED signaling solution that delivers an elevated standard of light output, flux density, and color
Part Number: 7953A Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor
Part Number: Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor Product Description Four Cat 6 23 AW G solid bare copper conductors, bonded pair polypropylene insulation,
2-Channel EMI-Filter with ESD-Protection
2-Channel EMI-Filter with 9499 6 5 4 2 3 MARKING (example only) XX YY Dot = pin marking YY = type code (see table below) XX = date code 9957 2 FEATURES Ultra compact LLP75-6A package 2-channel EMI-filter
PT4800FE000F PT4800FE000F. Opaque Resin, Medium Directivity Angle, Thin Package Phototransistor. Features. Agency Approvals/Compliance.
PT48FEF Opaque Resin, Medium Directivity Angle, Thin Package Phototransistor Features 1. Side view detection thin package 2. Plastic mold with opaque resin lens 3. Peak sensitivity wavelength: 86 nm (TYP.)
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
3.0 GHz DIVIDE BY 4 PRESCALER
. GHz DIVIDE BY PRESCALER UPB5GV FEATURES TEST CIRCUIT HIGH FREUENCY OPERATION TO GHz FIXED DIVIDE RATIO: LOW CURRENT CONSUMPTION: 5 ma at 5 V SMALL PACKAGE: 8 PIN SSOP AVAILABLE IN TAPE AND REEL Power
PT480E00000F. Phototransistor PT480E00000F. Features. Agency Approvals/Compliance. Applications
PT48EF Phototransistor Features. Side view detection type. Plastic mold with resin lens 3. Narrow directivity angle 4. Transparent resin. Lead free and RoHS directive component Agency Approvals/Compliance.
Ordering Information. Ratchet Relay G4Q. Plug-in Models. Model Number Legend
Ratchet Relay CSM OEE_DS_E_1_1 Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation
Small Signal Zener Diodes
Small Signal Zener Diodes FEATURES Zener voltage specified at 5 μa Maximum delta V Z given from μa to μa Very high stability Low noise AEC-Q qualified Material categorization: For definitions of compliance
COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
PHOTOCOUPLER PS2801A-1,PS2801A-4
PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
GL4800E0000F. Infrared Emitting Diode GL4800E0000F. Features. Agency Approvals/Compliance. Applications
GL4800E0000F Infrared Emitting Diode Features. Side view emission type. Plastic mold with resin lens 3. Medium directivity angle (Δθ: ±30 TYP.) Peak emission wavelength: 950 nm TYP. 4. Radiant flux φe:
HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type
GP2Y0A41SK0F Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type Description GP2Y0A41SK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
4-Channel EMI-Filter with ESD-Protection FEATURES VEMI45AA-HNH VEMI45AA-HNH-GS MOLDING COMPOUND FLAMMABILITY RATING
4-Channel EMI-Filter with ESD-Protection 2383 8 7 6 5 9 1 2 3 4 MARKING (example only) Dot = pin 1 marking Y = type code (see table below) XX = date code 2522 YXX 2719 FEATURES Ultra compact LLP1713-9L
2SC0106T2A0-12 Preliminary Data Sheet
Dual-channel ultra-compact cost-effective SCALE -2+ driver core Short Description The cost-effective SCALE -2+ dual-driver core combines unrivalled compactness with broad applicability. The driver is designed
1 Form A Solid-State Relay
1 Form A Solid-State Relay i17966_6 DESCRIPTION The is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. APPLICATIONS Security systems Instrumentation Industrial controls
THIS DOCUMENT OVERIDES ALL OTHER DOCUMENTATION WITH THE EXCEPTION OF THE READ ME FILE AND DRAWING SUPPLIED WITH THE DATA.
Page 1 of 6 THIS DOCUMENT FORMS PART OF THE PURCHASING CONDITIONS AND SUPPLIERS MUST NOTE THAT GOODS WILL NOT BE ACCEPTED UNLESS THEY COMPLY WITH THE FOLLOWING REQUIREMENTS: THIS DOCUMENT OVERIDES ALL
DISCONTINUED LASER DIODE NX8311UD nm FOR LONG HAUL 2.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA DESCRIPTION FEATURES
DESCRIPTION 1 310 nm FOR LONG HAUL.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA The NX8311UD is a 1 310 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode TOSA (transmitter optical
Scotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY
3 Dynatel M Series Locating and Marking System NEW- TO- THE- WORLD TECHNOLOGY PIN- POINT ACCURACY SAFETY DAMAGE PREVENTION Introducing the 3M Dynatel M-iD Series Locating and Marking System. NEW TECHNOLOGY
Detailed Specifications & Technical Data
Description: 24 AWG stranded (7x32) TC conductor, Datalene insulation, pairs individually shielded with bonded Beldfoil with a drain wire and have numbered and color-coded PVC jackets, overall Beldfoil
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
SiGe:C LOW NOISE AMPLIFIER FOR GPS
DESCRIPTION The µpc8tn is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics,
086 Model Series. 50Ω DC to 18 GHz. The Big Deal
HAND Coaxial TM Cable 50Ω DC to 18 GHz 086 Model Series The Big Deal Hand Formable Tight Bend Radius Excellent Return Loss and Insertion Loss Ideal for interconnect of assembled systems CASE STYLE: KP1505-XX
Surface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to
Thin Film Chip Resistors with Established Reliability
FEATURES Approved to EN 140401-801, version E Established reliability, failure rate level E6 Advanced thin film technology Pure Sn termination on Ni barrier layer Single lot date code Material categorization:
Gap : 1.7mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter
GP1S194HCZ0F Gap : 1.7mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter Description GP1S194HCZ0F is a compact and low-profile, transmissive photointerrupter with photo-transistor
Pulse Load Carbon Film MINI-MELF Resistors for High Frequency Applications
Pulse Load Carbon Film MINI-MELF Resistors for High Frequency Applications specialty MELF resistors combine the advanced pulse load capability and the suitability for RF applications in a single component.
ACT-IR220Li/220LN IrDA Serial Port Adapter
ACT-IR220Li/220LN IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
BRIDGELUX BLUE POWER DIE BXCD 26 mil x 30 mil
PRODUCT DATA SHEET DS-C30 The Bridgelux family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers
PHOTOCOUPLER PS2805-1,PS2805-4
PHOTOCOUPLER PS2805-1,PS2805-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
Agilent 1GG Packaged 13.5 GHz GaAs Diode Limiter
Agilent 1GG5-8205 Packaged GaAs Diode Limiter TC626P Data Sheet Features ESD Protection: 3000V Human Body Model Insertion Loss: 1.0 db Typ. Port Match: S 11 and S 22 15 db Typ. Power Handling: P 1dB 25
MODULATION LIGHT SOURCE FOR DWDM APPLICATIONS
LASER DIODE NX8563LA Series 1 550 nm InGaAsP MQW-DFB LASER DIODE MODULE 2.5 Gb/s DIRECTLY MODULATION LIGHT SOURCE FOR DWDM APPLICATIONS DESCRIPTION The NX8563LA Series is a 1 550 nm Multiple Quantum Well
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick