n io t a m r fo n i t c u d o Pr

Transcription

1 Product information

2 That is why responsible pilots and model maker choose weatronic Two redundant transmitting and receiving systems Our transmitter modules and receivers* are operating with 2 independent transmitting and receiving systems that are permanently adjusting their data (redundant systems). As if in a restaurant the 2 waiters would have taken your order, have mutually controlled their versions and then in the kitchen both orders would have been compared before starting the stove. Individual as yourself Tuning your model with our GigaControl software you feel like a musician playing the piano and composing your own masterpiece. Starting with control features assignment you proceed via servo curves of your own to the sum channels, servo supply voltage and other features tuning your model like a musical instrument till it sounds just perfect!

3 Using 80 channels The more hopping frequencies you have at your disposal the safer is data transmission. It makes a great difference when only two ways are leading to my destination or my navigation is choosing the best route of 80 possible and this at the rate of 100 per second! Data recording a MUST in the real flying The least failures in the system could be identified, crash reasons would be clarified, flight characteristics and control would be optimised and the information of the stored thresholds gives you confidence. The automatic report saved on SD-card in every weatronic transmitter module and in weatronic receivers Gizmo as the basis of your professional knowledge. Every weatronic receiver has full telemetry capabilities You as a pilot determine the information. Depending on connected modules our receivers could capture all telemetry data, route them further and process. YOU determine which values, thresholds or other data you need in the cockpit from air speed, temperature and voltage, signal strength up to climb or descent rate. * but for Clever 6 and Tiny 5

4 weatronic your specialist in 2,4 GHz-band Our company located in the Aerospace Centre in Wildau develops and manufactures products designed to provide you the highest operation reliability and disturbance immunity. Quality and reliability are of the top priority to our experienced hard- and software specialists. We ensure you will enjoy our products and guarantee you their reliability. Enthusiasm of the highest level and absolute passion: + All our transmitters and receivers have two independent parallel transmitting and receiving systems providing optimal transmission reliability (redundant system*) + Connect up to 8 servos per channel for the maximal availability and mechanical force + Individually programmable for mixer, servo curves, sequencer functions, etc. our devices meet the highest requirements + Playback your flight experiences on your PC also in 3D due to recording of ALL the captured data on micro-sd card + Experience your flight retrospectively in Google Earth + Amazing variety of programming possibilities enabled by our provided software makes your heart beat faster + Our free software updates keep you always up to speed and guarantees compatibility and your investment + Sample configurations to practice, test and marvel + Enjoy your co-pilot with the voice output of telemetry data in real time + The joy of flying guaranteed by our very long operating distance with maximal reliability (* but for Clever 6 and Tiny 5)

5 quality by passion

6 weatronic hand-held transmitter BAT 60 and tray BAT 64 High-tech standard made in Germany in the Aeronautic Centre: 9x ballbeared sticks wear-free thanks to the hall-sensors innovative gas- / brake handle concept 22 (28) free programmable control elements 5ʺ capacitive touch screen 800 x 480 colour LCD Look and find function due to built in GPS receiver web interface for external access and programming separate charge controller for each Li-Ion cell one battery is always reserved as 25% reserve for the safer landing micro-sd card for data recording USB-A and USB-B (master und slave) 3,5 mm headphones exit two parallel transmitting and receiving systems optional 3-axial gyro optional 3-axial positioning with acceleration sensors optional WLAN and Bluetooth, UMTS via USB optional with control functions in stick and selectable stick length Developed to the new ETSI standard EN V1.8.1 weatronic hand-held transmitter BAT 60

7 Technical data: transmission: adaptive frequency hopping operation with listen before talk function hopping-frequencies: 80 hopping-speed: 100 Hz antennas: 2 x patch antennas (angle of radiation > 180 ) 4 Li-Ion batteries à 3000 mah integrated GPS receiver operating- and charging voltage: 10,0 20,0 Volt temperature range: -10 C to +60 C, non-condensing dimensions: 220 x 200 x 51 mm / 8,7 x 7,9 x 1,9ʺ (L x W x H) weatronic tray transmitter BAT 64 Available in season Changes and errors reserved.

8 Transmitter module DV4 Safety and reliability are the basis of our work. Therefore the weatronic systems are transmitting and receiving respectively via two flat top antennas (redundant systems) which means DOUBLE safety. Our transmitter modules are considerably ahead of conventional rod antennas due to their construction and ideal hemispherical radiating parameters. Further advantages mean in use: Technical data: transmission: adaptive frequency operation (principle) hopping frequencies: 80 hopping speed: 100 Hz antennas: 2 x patch antennas (angle of radiation > 180 ) transmitting power: 20 dbm (100 mw) status indicator: 3 LED on the housing operating voltage: 5,0 10,0 Volt (additional tension (voltage) regulators are plugged in some mounting adaptors) current consumption: ca. 200 ma temperature range: -10 C to +60 C, non-condensing dimensions: 95 x 65 x 18 mm / 3,7 x 2,6 x 0,7ʺ weight: 60 g / 2,1 oz recording of all transmitted and received data to the Micro-SD card in transmitter module optical and acoustical warnings voice output of telemetry data of the model and during the flight telemetry units send their data directly to the transmitter module the easiest modification of most available transmitters (usually plug and play principle) upgradeable, therefore always up to date optional transfer of telemetry data via Bluetooth very long operating distance, over meters with unobstructed view

9 Gizmo High-end product for demanding and professional pilots. The utmost safety and reliability are combined in this double receiver. I.a. achieved due to: up to 16 channels and 30 servo outputs 8 separate servo banks shortcircuit safe and voltage regulated (each bank 6 or 7,4 Volt selectable) optional 3 gyros und optional with GPS full telemetry compatible integrated, loss free double current (power) supply SD-memory card space as the Black Box (flight data recorder) automatic servo synchronisation switchboard (external on/off switch, binding) 2 antennas inputs (SMA) battery test when switching on simple, individually programmable channels upgradeable, therefore always up to date Technical data: transmission: adaptive frequency operation (principle) hopping frequencies: 80 hopping speed: 100 Hz operating distance: > meters, with patch-antenna > meters (unobstructed view) antennas: 2 x SMA-adaptors (serial 2 x 200 mm ) telemetry transmitting power: 20 dbm (100 mw) inputs: 2 x for external gyros status indicators: 2 LED on the switchboard, 3 LED on the housing operating voltage: 6,0 (5,0) 10,0 Volt (it is not possible to switch on the device if both batteries are under 6,0 Volt ) current load up to 40 A DC (temperature sensitive) temperature range: -10 C to +60 C, non-condensing dimensions: 143 x 84 x 27 mm / 5,6 x 3,3 x 1,1ʺ weight: 270 g / 9,5 oz

10 Micro 10 (12) Dual Receiver 2,4Dual FHSS This series stands for the most successful and the upmost variable purpose module of weatronic. Double safety goes here without saying together with: 12 channel receiver for connecting of 10 or 12 servos 2 antennas with 2 HF-parts providing permanent matching signal packets very high noise immunity optional with up to 3 gyros 2 additional battery connectors (Micro 10) 32-Bit-ARM-processor for receiving signal and control functions pre-programmable setting adjustment of each channel in case of interference (failsafe) upgradeable, therefore always up to date simple, individual programming of each channel Technical data: transmission: adaptive frequency operation (principle) hopping frequencies: 80 hopping speed: 100 Hz operating distance: > m (unobstructed view) antennas: 2 x 190 mm effective antenna length: 29 mm operating voltage: 3,8 10,0 Volt current consumption: max. 130 ma (with gyro) current load: max. 5 A DC for servos temperature range: -10 C to +60 C, non-condensing dimensions: 62,5 x 25,3 x 17,1 mm / 2,5 x 1,0 x 0,7ʺ weight: 15 g / 0,53 oz

11 Technical data: transmission: adaptive frequency operation (principle) hopping frequencies: 80 hopping speed: 100 Hz operating distance: > m (unobstructed view) antennas: 2 x 190 mm effective antenna length: 29 mm telemetry transmitting power: 20 dbm (100 mw) operating voltage: 3,8 10,0 Volt current consumption: max. 130 ma (with gyro) current load: max. 5 A DC for servos temperature range: -10 C to +60 C, non-condensing dimensions: 54,8 x 34 x 18,8 mm / 2,1 x 1,3 x 0,7ʺ weight: 30 g / 1,05 oz Smart 8 Dual Receiver 2,4Dual FHSS Double safety and high power are combined in the small and light dual receiver. Small und mid-size models showing here the real benefits of the premium class technics, variable control possibilities accompanied with the maximal safety. This includes: 12 channel receiver for direct connecting of up to 8 servos 2 antennas with RF-parts adjusting permanently signal packets enormous noise immunity optional with one gyro 32-bit-ARM-processor for receiving signal and control functions pre-programmable setting adjustment of each channel in case of interference (failsafe) upgradeable, therefore always up to date simple, individual programming of each channel sum-channel (12 channels), ideal for quadrocopter, external gyros und power box

12 Clever 6 Receiver 2,4Dual FHSS The receiver for small models. Small and light, with good operating distance this 12 channel receiver offers the enormous noise immunity. Additional features: 6 direct outputs full telemetry compatible 32-bit-ARM-processor for receiving signal and control functions pre-programmable setting adjustment of each channel in case of interference (failsafe) upgradeable, therefore always up to date simple, individual programming of each channel sum-channel (12 channels), ideal for quadrocopter, external gyros and power box Technical data: transmission: adaptive frequency operation hopping frequencies: 80 hopping speed: 100 Hz operating distance: ca m (unobstructed view) antennas: 1 x 90 mm effective antenna length: 29 mm telemetry transmitting power: 20 dbm (100 mw) operating voltage: 3,8 10,0 Volt current consumption: max. 90 ma current load: max. 5 A DC for servos temperature range: -10 C to +60 C, non-condensing dimensions: 46,5 x 24,1 x 13,1 mm / 1,8 x 0,9 x 0,5ʺ weight: 9 g / 0,31 oz

13 Tiny 5 Receiver 2,4Dual FHSS This receiver is designed for the smallest models. Very small, very light with integrated chip antenna and without external antenna cable this 5 channel receiver offers the solid operating distance and enormous noise immunity. Additional features: 5 direct outputs full telemetry compatible 32-bit-ARM-processor for receiving signal and control functions pre-programmable setting adjustment of each channel in case of interference (failsafe) upgradeable, therefore always up to date simple, individual programming of each channel sum-channel (12 channels), ideal for quadrocopter, external gyros und power box Developed to the new ETSI standard EN V1.8.1 Technical data: transmission: adaptive frequency hopping operation (principle) with Listen before Talk function hopping-frequencies: 80 hopping-speed: 100 Hz operating distance: < 500 m (unobstructed view) telemetry transmitting power: 20 dbm (100 mw) operating voltage: 3,8 10,0 Volt current consumption: max. 80 ma current load: max. 5 A DC for servos temperature range: -10 C to +60 C non-condensing dimensions: 40 (30) x 18 x 9 mm / 1,6 (1,2) x 0,7 x 0,3ʺ weight: 4,5 g / 0,16 oz

14 LinkVario / LinkVario Duo Variometer system LinkVario is an acoustic precision variometer with altimeter and voice output. More fun with thermal flying you can fly longer, especially with weak thermal lift. suitable for TEK pitot tubes, thereby presenting the real energy (potential and kinetic) of a glider connection of external sensors of SM-modelling for optimisation and adjustment of the flight components available with 1 or 2 air sensors current supply: 4 to 10 V (from the receiver or receiver battery) Technical data: variometer resolution: better than 0,5 cm/s variometer range : +10/-5 m/s altitude resolution with LinkVario Duo: typical 0,1 m altitude measuring: up to m MSL LinkVario voltage control: up to 10 V dimensions: 60 x 24.5 x 14,5 mm / 2,4 x 1,0 x 0,6ʺ without TEK pitot adaptor current consumption: typical 15 ma weight: 13 g / 0,46 oz Modern GPS-module for the weatronic telemetry system Due to its compact size our module could be built in almost every model. At your disposal voice output of the self defined warning limits. Model position would be recorded in the log file on Micro-SD Card. This includes: altitude in meters or feet speed in km/h; m/s; m/h; knots distance in meters or feet as a slant range course in degrees position in decimal degrees, e.g , speed over ground

15 Modern GPS-module for the weatronic telemetry system Technical data: μ-blox 5 GPS & GALILEO SuperSense GPS chip set internal patch antenne position update rate: 4 Hz velocity error: 0,1 m/s new data capture: 1 second, average warm start: 3,5 seconds, average cold start: 30 seconds, average current supply: 4 to 10 V (from the receiver or receiver battery) current consumption: max. 80 ma operating temperature range: -20 C to +70 C dimensions: 33 x 33 x 16 mm / 1,3 x 1,3 x 0,6ʺ weight without cable: 23 g / 0,81 oz

16

17 MUX-Box MUX-Box is a connection between weatronic receivers and sensors in the model. up to 10 external sensors could be connected programmable different recording (logging-) rates are selectable internal calculations are possible digital input protected with optocoupler 3 switching outputs e.g. for LED up to 4 MUX-boxes cascadable upgradeable, therefore always up to date Switch 4 our performance-fet switch with 4 outputs Our little one a switch module with four outputs and special features: each output is up to 10 A resilient (total 20 A at the same time) for the first time plus switched therefore much easier to wire the model dimmable outputs connection to any servo output connection directly to the MUX-box programmable 14 blink- / switchmodes preprogrammed short-curcuit proof overheating protection upgradeable, therefore always up to date Technical data: operating voltage fed to servo adapter: 3,2 10,0 V current consumption: depending on switching status ma voltage allowed to be connected: 2 16 V max. current load per channel: 10 A total current load: 20 A switching frequency (PWM): max. 400 Hz

18 Patch-antenna Use of our patch antenna provides your model higher reliability and longer operating distance: superior transmitting and receiving characteristics up to 10 db gain compared to stub antennas hemispherical radiating pattern no polarisation loss and therefore no more position dependance weight: 18 g / 0,63 oz Also available as 5,8 GHz FPV-antenna

19 FUN AND RELIABILITY OF THE HIGHEST LEVEL!

20 Software GigaControl No matter if you are a beginner or a professional with the highest requirements with this software you will easy and simple make all personal and substantial adjustments of the complete unit including: allocation and configuration up to 30 servos pre-programmable setting adjustment of each channel in case of interference (failsafe) adjustment of single servo curves activation of the full automatic servo synchronisation for the optimal ganged operation, power and minimal current consumption warning limits configuration big display of three relevant values (data) display overview of all servo connections at a time (monitoring) configuration of LinkVario limit values and messages adjustment of possible GPS-messages and threshold values MUX-box control spectrum indication of the actual channel allocation (assignment) on the airfield overview, control and processing of complete data from the log file in 2D and 3D

21 Telemetry Capture and monitoring of the flight data stand for the maximum safety. With weatronic systems the pilot has all the necessary data at his disposal like in a real cockpit. Almost every value will be captured and output e.g. current, voltage speed climb and decent temperature visual or voice transmission of the data co-pilot individually adjustable warning and announcement limits free selectable announcement intervals extendable with external sensors With Android-app for display on smart phones and tablets. To keep your focus on flying!

22 Accessories

23 cables antennas adapters fastening-parts kits jumpers sensors

24 weatronic GmbH Schmiedestr. 2A D Wildau, Germany Telefon: +49 / (0)3375 / Fax: +49 / (0)3375 / info@weatronic.com Your dealer: Gestaltung: Bilder: weatronic