FLORIDA STANDARDS LABORATORY, INC 716 Bunker Road West Palm Beach, Florida USA

Transcription

1 AMERI NDARPS FLORIDA STANDARDS LABORATORY, INC 716 Bunker Road West Palm Beach, Florida USA ISO/IEC 17025:2005 This laboratory Is accredited in accordance with the recognized Standard ISO/IEC 17025:2005. "General Requirement for the Competence of Testing and Calibration Laboratories." This laboratory also meets the requirements ofansi/ncsl Z and any additional program requirements In the field of calibration. This accreditation demonstrates technical competence for a defined scope and the operation of laboratory quality management systems. On-Site & Laboratoiy Calibration, Repair and Maintenance of Measuring Instruments & Test Equipment As Detailed in the Attached Schedule This approval is subject to the firm maintaining its system to the required standards, which will be monitored by AGS. in the issuance of this certificate, AGS assumes no liability to any party other than the firm named above, and then only in accordance with the agreed upon Quality System Assessment Agreement. Certification Number: Original Approval: Date of issue: Date of Expiration: AGS-US /3 December 08, 2011 December 08, 2017 December Coast Village Road, Suite #495, Montecito, OA USA Tel: info(a>americanqlobal.orq ACCREDITED

2 ACCREDITED FLORIDA STANDARDS LABORATORY, INC. 716 Bunker Road West Palm Beach, Florida USA Attachments to Registration Certificate AGS-US /3 Issued: December 08, Expiration: December 07, 2020 Table 1: Laboratory Calibration and Capability Dimensional Length - < 0.10 in > 0.10 into 4.0 in CMC(±) k (95.45 %) = 2 (8.279 L) pine 's) C9.284 Z,Jpine'i Federal Products Electronic Gage Block Comparator & Master Gage Block Set > 4.0 in to 18.0 in ( L] pine-') Pratt & Whitney Linear Measuring Machine & Master Gage Block Set > 18.0 in to 40.0 in ( L] pine.') & Master Gage Block Set & Electronic Indicator > 40 in to in [100 (0.144i)ine") ft] Stanley 100' Tape < 2.5 mm ( L] 5pme. ">) Federal Products 130B-24 Electronic Gage Block Comparator & Master Gage Blocks 2.5 mm to 100 mm ( Z,]pmO) Length into 0.10 in > 0.10 in to 4.0 in 4.0 in to 40 in (8.198 Z,] pinlfs) (9.212 L] pinp ') (12.121L} pin (19) Master Gage Blocks Pratt & Whitney Linear Measuring Machine & Gage Blocks 2 mm to 100 mm ( Z,] pm(i9) Master Gage Blocks Surface Plate - Flatness Repeatability Electrical DC Voltage - 1 pvto 100 mv 0.1 V to 1.0 V 1.0 V to 10.0 V 10.0 V to V loovtolooov 30.3 Min m 10.0 Min (1) % pv m 0.001% + 0.3pV(2) 0.001%+ 0.5 pv (2) % + 30pVi2) % + 100pV(2) Rahn Straight Edge & Repeat-O-Meter Agilent 3458A IkVto 15 kv ± 0.01 % (3) Fluke 80F-15 & Agilent 3458A ISkVto 100 kv ±0.115 %m Spellman HVDIOO & Agilent 34411A 1187 Coast Village Road, Suite #495, Montecito, CA 93108, Tel: infoiaamericangl

3 Table 1: Laboratory Calibration and Capability CMC(±) k (95.45 %) - 2 DC Voltage - 0 to 100 mv 0.1 V to 1.0 V l.ovtolo.ov 10.0 V to V loovtolkv IkVto 10 kv pvc) pvh) IpVO) pvh) mv (9 ± 0.01 % (3) Agilent 3458A & Fluke 335A Fluke 80F-15, Fluke 410B, Agilent 3458A AC Voltage - 40 HztolkHz OmVto 10 mv 0.03 % + 3 pv (2) 0.02% +1.1 pv 12) 0.03% +1.1 pv (2) 0.1% + l.lpv(2) 0.5% + l.lpv(2) 4.0% + 2pV(2) Agilent 3458A 300 khz to 1 MHz lmhzto2mhz 300 khz to 1 MHz lmhzto2mhz 300kHztolMHz lmhzto2mhz 300kHztolMHz lomvto 100 mv % + 4 pv (2) % + 2 pv (2) 0.014% +2 pv(2) 0.03 % + 2 pv (2) 0.08 % + 2 pv (2) 0.3%+ 10 pv(2) 1.0% + 10pVl2) 1.5 % + 10 pv (2) 100 mvtolv % + 40 pv (2) % + 20 pv (2) 0.014% + 20pV(2) 0.03% + 20pV(2) 0.08% + 20pV(2) 0.3% pv (2) 1.0% + 100pVt2) 1.5% pv (2) IVtolOV % mv (2) % mv (2) 0.014%+ 0.2 mv (2) 0.03 % mv (2) 0.08 % mv (2) 0.3 % + 1 mv (2) 1.0 % + 1 mv (2) 1.5 % + 1 mv (2) lovto 100 V 0.02% + 4mV(2) 0.02 % + 2 mv (2) 0.02 % + 4 mv (2) % + 2 mv K 0.12% +2mV (2) 0.4 % + 10 mv (2) 1.5% + lomv (2) 100 V to 700 V 0.04 % + 40 mv (2) 0.04 % + 20 mv (2) 0.06% + 20mV(2) 0.12% + 20mV(2) 0.30 % + 20 mv 12) 50 Hz to 5 khz 700 V to 30 kv 0.55%rdgf) Ross Engineering VD Y-A-LB-AL & Fluke CoastVillageRoad, Suite #495, Montecito, CA 93108, Tel: infoiaamericanglo

4 Table 1: Laboratory Calibration and Capability CMC(±] AC Voltage 10 Hz to 10 khz 10 Hz to 30 khz 30 khz to 100 khz 10 Hz to 30 khz 30 khz to 100 khz 10 Hz to 30 khz 30 khz to 100 khz 10 Hz to 30 khz 30 khz to 100 khz OmV to 0.12 V 0.02% + 12pV(2) 0.03% + 24pV(2) 0.05% + 60pV(2) 0.12 V to 1.2 V 0.02 % pvp) 0.03% V to 12.0 V 0.02% pV 0.03% pv 12 V to 120 V 0.02% + 12mV 0.05% + 36mV Valhalla Scientific Hz to 1 khz 120 V to 1200 V 0.03 % mv DC Resistance n to 10.0 n 10.0 n to n n to 1.0 kn i.oknto 10.0 kn 10.0 kn to kn kn to 1.0 Mn 1.0 Mnto 10.0 Mn 10.0 Mnto Mn Mnto 1.0 on % + 50 pn % mn % mn % + 5 mn (2) % + 50 mn % + 2 n (2) % % + 1 kn 0.500% + 10 kn Agilent 3458A DC Resistance n 0.01 n 0.1 n 1.0 n 10.0 n n 1.0 kn 10 kn 100 kn 1.0 Mn pn (I S) pno-3) pn (1.5) pn (1.5) pn (1.5) pn (1.5) mn(i.5) mn(i.5) mn 0.5) n (1.5) L&N 4223 L&N 4222 L&N 4221 L&N 4210 L&N 4025-B L&N 4030-B L&N 4035-B L&N 4040-B L&N 4045-B L&N 4050-B 1.0 Mntoi.o Gn 1 Gn toioo Gn 0.1 % (2) 0.5 % (2) Biddle DC Current na to 1 pa 1 pato lopa 10 pato 100 pa 1mA to 10 ma 10 mato 100 ma loomato la % + 40 pa (2) %+ 100 pa(2) % + 80 pa (2) % na % + 5 na (2).004 % + 50 na (2).012 % + 1 pa Agilent 3458A 1 A to 150 A A/A (1) Agilent 3458A Multimeter & Biddle A to 2,000 A 3 % Simpson Switchboard Shunts DC Current nato 1 pa 1 pato lopa 10 pato 100 pa 1mA to 10 ma % + 40 pa (5) %+ 100 pa(8) % + 80 pa (8) % na m % + 5 na («) Agilent 3458A, Fluke 335A 10 ma to 100 A A/A (1) Agilent 3458A, Fluke 335A, Valhalla Scientific 2555A, Biddle Coast Village Road, Suite #495, Montecito, CA 93108, Tel: infooamericangl

5 Table 1: Laboratory Calibration and Capability k (95.45 %) = 2 DC Current - (Continued] Current Clamps 10 to ADC 16.5 to 150 ADC 150 to ADC A/A A/AC) A/A Agilent 3458A, Fluke 335A, Valhalla Scientific 2555A, Biddle , Fluke 5500A/Coil AC Current - 10Hzto20Hz 0 pa to 100 pa 0 pa to 100 pa OpAtolOOpA 0 pato 100 pa 0.40% + 30nA(2) 0.15 % + 30 na C2) 0.06% + 30nA(2) 0.06% + 30nA(2) Agilent 3458A 10 Hz to 20 Hz 0.40 % pa (2) 0.15% + 0.2pA(2) 0.06 % pa (2) 0.03 % pa (2) 10 Hz to 20 Hz 1 ma to 10 ma 1 mato 10 ma 1 mato 10 ma 1 mato 10 ma 0.40 % + 2 pa (2) 0.15% + 2pA(2) 0.06 % + 2 pa (2) 0.03 % + 2 pa (2) 10 Hz to 20 Hz 10 mato 100 ma 10 mato 100 ma 10 mato 100 ma 10 ma to 100 ma 0.40 % + 20 pa (2) 0.16% + 20pAl2) 0.08 % + 20 pa (2) 0.10 % + 20 pa (2) 10 Hz to 20 Hz 100 mato 1.0A 100 mato 1.0 A 100 mato 1.0A 100 mato 1.0 A 0.40 % ma O 0.16% +0.2 ma (2) 0.08 % ma (2) 0.10% +0.2 ma (2) 45 Hz to 1 khz 10 khz 1.0 A to 100 A 1.0 A to 10.0 A 10.0 A to 100 A A/AC) A/AC) A/AC) Agilent 3458A & Valhalla Scientific 2575A AC Current - Generate 20 Hz to 100 Hz 100 Hz to 400 Hz 400 Hz to 1.0 khz 100 pato 100 A 100 pato 100 A 100 pa to 100 A A/AC) A/A C) A/AC) Agilent 3458A & Valhalla Scientific 2575A Current Clamps 45 Hz to 65 Hz 45 Hz to 65 Hz 45 Hz to 65 Hz 65 Hz to 440 Hz 65 Hz to 448 Hz 65 Hz to 440 Hz 10 to ADC 16.5 to 150 ADC 150 to ADC 10 to ADC 16.5 to 150 ADC 150 to ADC A/A A/A A/A A/A A/A A/A Fluke 5500A/Coil, Agilent 3458A & Valhalla Scientific 2575A Capacitance - l.opfto 1.2 nf 1.2 nfto 120 pf 120 pf to pf 0.2% 12) 0.1 % (2) 0.2 % (2) ESI Coast Village Road, Suite #495, Montecito, CA 93108, Tel: infooamericangl

6 Table 1: Laboratory Calibration and Capability Capacitance - 10pF@ 1 khz 100 pf (3)1 khz khz pf@ 1 khz pf (5) 1 khz 1.0 pf (5) 1 khz 1.0 pftolopf@lkhz pF(t5) pF(i pfc pf (I S) IpFC S) pf pf (9 GenRad Standard Capacitors Inductance ph to 12.0 ph 12.0 ph to 120 H 120Htol 200H 0.2 % (2) 0.1% (2) 0.2 % (2) ESI 293 Inductance ph (3) 1 khz 1 1 khz 10 mh (3) 1 khz khz 1 1 khz ph ( ph [ ph ( ph ( ph (9 GenRad 1482 Series Modulation - FM 10 khz & 100 khz 50 Hz to 5 khz modulation l%rdg(2) Deviation FS frequency 5 khz to 7.5 khz 2 % rdg (2) modulating frequency Boonton8210 AM 10 % & 100 % FS 50 Hz to 5 khz mod freq 1 % rdg (2) 10% to 90% 5 khz to 7.5 khz mod freq 2 % rdg (2) 10% to 90% 50 Hz to 5 khz mod freq 3 % rdg (2) <10%&>90% 5 khz to 7.5 khz mod freq 6 % rdg (2) <10%&>90% RF Power - CMC's are based on the power and frequency combinations shown. Other combinations of power and frequency may result in higher CMC values. lw(+30dbm]-100mhz ± 1.65% ( dbm/ dbm) (9 Hewlett Packard 435B & Hewlett Packard 848 IB 25 W (+44 dbm]-100 MHz % ( dbm/ dbm) (9 0.1W(+20dBm) 10 MHz 0.1W(+20dBm) 18 GHz ± 3.22% ( dbm/-hewlett Packard 435B & Hewlett Packard dbm) (9 8481A ± 3.48% ( dbm/ dbm) (9 100 pw- 10 pw-18 GHz (-20 dbm to -65 dbm) ± 3.22% ( dbm/-hewlett Packard 435B & Hewlett Packard dbm) (9 8484A 1187CoastVillageRoad, Suite #495, Montecito, CA 93108, Tel: infoiaamericangl

7 Table 1: Laboratory Calibration and Capability Phase Angle V/V lomvto 630VRMS 5 Hz to 2 khz >2 khz to 5 khz >5 khz to 10 khz >10 khz to 50 khz >50kHztolMHz v/i lomvto 630VRMS/1A to 10 A 5 Hz to 1 khz 1 khz to 100 khz 0.02 (2) 0.03 (2) 0.04 (2) 0.05 (2) f(in khz) X (2) m [5 m + 50 m (f khz)] (1 Clark Hess 6000A Clark Hess 6000A&610 V/I lomvto 630VRMS/10A to 100 A 5 Hz to 100 Hz 100 Hz to 500 Hz 500 Hz to 1 khz ( (1 Clark Hess 6000A & 650 V/V V/1 50 Hz to 8 khz (21 Dytronics V / 25 50/60 Hz (' Multi-Amp Epoch-1, Clark-Hess 6000A & 610/650 Humidity 0 to 90 % RH. 1.0%RH(2) 90 to 100 %RH 1.7%RH(2) (+15 to +25 "C ambient) Vaisala HM70 Humidity & Temperature Meter with HMP77 Probe Mass 1 mgto 10 g steps mg(9 Fisher Scientific Class "S" Weights & Voland g 50 g 100 g 200 g 300 g 500 g 1kg mg ( mg ( mg( mg( mg( mg( mg(9 Troemner Ultra Class Weights & Voland 200 Mass 1 mg to 10 g steps 8 mg (1+9 Fisher Scientific Class "S" Weights 20 g 50 g 100 g 200 g 300 g 500 g 1kg 2 kg 3 kg 5 kg 10 kg 1 lb to 500 lb mg(2. + 5) me(2. + 5) mg (2,4.5) mg(2.4.5i mg (2.4.5) mg(2.4.s) mg(2.4.5) mg (2.4.5) mg (2.4.5) mg (2.4.5) me (2.9.5) mg/lb Troemner Ultra Class Weights Troemner Class F Weights 1187 CoastVillage Road, Suite #495, Montecito, CA 93108, Tel: info(samericang

8 Table 1: Laboratory Calibration and Capability Pressure 17inHgto34inHg (Barometric) 0.015% Rdg MensorCPG2300 -ISpsi toopsi 0 to +30 psi psi psi Fluke 2030-BG200K 30 psi to 500 psi psi Fluke 2030-BG3.5M 500 psi to psi psi Fluke 2030-BG7M psi to psi psi Fluke 2030-BG70M Pressure 0tol0inH2O 0 to -15 psi 0 to +30 psi in psi psi Meriam Instruments 40HE35WM Fluke 2030-BG200K 30 psi to 500 psi psi Fluke 2030-BG3.5M 500 psi to psi psi Fluke 2030-BG7M psi to psi psi Fluke 2030-BG70M Thermal Temperature C to 420 C -100 C 0 C 200 C 420 C 420 Cto 1050 C C tol371 C (Infrared) C m C ( C ( C ( C (9 1 % Rdg or 3 C whichever is greater Hart Scientific 1521 & Hart Scientific Omega Type K Thermocouple Omega OS523 Temperature C C (9 Hart Scientific 1521, Hart Scientific & Ice Bath -25 C to +35 C 0.25 C Fluke Cto375 C 50.0 C C C 0.25 C 0.25 C 0.50 C Fluke 9100S Temperature - (Continued) 375 C to 600 C 2.69 C (9 35 C to 500 C (Infrared) 35 C 0.35 C 100 C 0.50 C 200 C 0.70 "C 350 C 1.20 C 500 C 1.60 C Omega Tjfpe K Thermocouple, Agilent 3458A, Hart Scientific 1521 & Hart Scientific Fluke CoastVillageRoad, Suite #495, Montecito, CA 93108, Tel: infotaamericanglob

9 Table 1: Laboratory Calibration and Capability Time & Frequency DC to 20 GHz <1xlO 23 C ± 3 C Fluke 910 GPS-Controlled Frequency Standard & Various Frequency Locked Counters DC to 20 GHz <1 xlo C±3 C Fluke 910 GPS-Controlled Frequency Standard & Various Frequency Locked Generators Torque 0 to 20 Ib-in 0.5% of Reading (2) Torque wheel & weights 2 to 20 Ib in 0.5% of Reading (2) Mountz S to 250 lb/in 1.0% of Reading (2) Sweeney Ib in to 500 Ib ft 2.0% of Reading (2) Sweeney 71 & 73B 0 to 20 Ibin 0.5% of Reading (2) Torque wheel & weights 2 to 20 Ib-in 0.5% of Reading (2) Mountz S to 250 Ib-ft 1.0% of Reading (2) Sweeney Ib-in to 500 Ib-ft 2.0% of Reading (2) Sweeney 71 & 73B CMC calculated by combining relevant sources of uncertainty. See relevant Uncertainty Budget 2 CMC based on the manufacturer's specifications of equipment shown in comments. CMC based on high voltage probe specification. Error contributed by other standard(s) is not significant. ' CMC equal to mass in air calibration value vs. reference density 8000 kg "2. 2 CMC equals actual value equal to reported value of standard. ^ CMC based on apparent mass in vs. material of density 8000 g 2. ' CMC based on the specifications of Agilent 3458A Multimeter. 9 CMC based on the specifications of Agilent 3458A Multimeter. Fluke 335A DC Voltage Standard used as a source only ' In the statement of CMC, L is the numerical value of the nominal length of the device measured in inches or meter 1187 Coast Village Road, Suite #495, Montecito, CA 93108, Tel: infoiaamerica