Primata II. Flexible and versatile continuous row trunking system for commercial and industrial applications

Transcription

1 Primata II Flexible and versatile continuous row trunking system for commercial and industrial applications

2 Contents 3 Primata II - an introduction 4/5 Applications 6 Fast, safe, simple, cost effective and flexible 7 PEC programme 8 Tool-free installation 9 Electrical configuration 10 Three-phase system 11 Complete control 12 Special accessories 13 How to specify a Primata II lighting system 14 Brackets and suspension (Step 1) 15 Trunking (Step 2) 16/17 Trunking accessories (Step 2) 18 T16 Luminaires (Step 3) 19 T26 Luminaires (Step 3) 20/21 White refectors (Step 4) 22/23 Aluminium reflectors (Step 4) 24/25 Basic housing with mirror optics (Step 4) 26/27 Basic housing with louvre optics (Step 4) 28 Basic housing accessories (Step 4) 30/31 Optional extras (Step 5) 32/33 Photometric data 34/35/36 sheet 37 Configuration sheet

3 Primata II Pre-wired trunking systems save time and money. They are increasingly popular in today s cost-sensitive market because they are quick and easy to assemble, and simple to install without special tools Primata II, with its simple, consistent tool-free mounting and electrical connection, can reduce installation times by up to 40% compared with conventional products. It is a pre-wired continuous row system with a comprehensive selection of fluorescent luminaires and various optics. Primata II offers a number of valuable benefits: Simple, tool-free installation saves time and money Pre-wired trunking improves electrical safety Wide range of reflectors, optics and accessories ensures a perfect match for virtually any project and application Choice of wiring configurations up to 9-pole can support optional functions including mains power supply, dimming and emergency lighting 3

4 Applications Industry and Production Primata II is an ideal solution in large working areas where uniform illumination is vital. As well as providing efficient and economical output, its precise glare control means that Primata II can be installed in areas where VDT screens are used. A new IP60 (dust-tight) protected lamp enclosure ensures safety and continued performance. Summary of benefits: Efficient and economical Uniform illumination Glare control in areas where VDT screens are used Dust protected lamp version Safety Warehouses and Distribution Primata II offers energy efficient solutions for warehouses and storage areas, through its combination of high output light sources, precisely calculated and designed optics, and a choice of narrow or wide beam distributions. Summary of benefits: High light output promotes clear visibility and safety Precise direction of light Choice of narrow or wide beam distribution 4

5 Supermarkets, Hypermarkets and Commercial Areas Primata II is a versatile solution that helps to create a comfortable shopping experience in customer-facing areas of all types and sizes. Its glare-free light, with asymmetric distribution for shelf illumination, provides customer comfort and presents products to maximum advantage. The ability to include spotlights, offers additional scope for accent lighting. Summary of benefits: Glare free light for customer comfort Precise direction of light Asymmetric distribution for shelf lighting The ability to integrate spotlights for accent lighting Visual comfort and ambience to create a pleasant shopping environment Trade Centres and Exhibition Halls Primata II offers a dynamic solution to nearly any site. It can be easily adapted to any layout, and the right optical performance ensures visitor comfort and optimum presentation of individual stands. Its energy efficiency makes it the preferred system for owners and end users. Summary of benefits: Economical, glare-free light Flexibility to adapt to changing space layouts Comfort and ambience to create a stimulating environment for visitors 5

6 Fast, safe, simple, cost effective and flexible it s the logical choice Easy to configure and install, Primata II is the ideal choice for applications where quality, efficiency and versatility are essential Primata II is a tried and proven solution. It s quick and easy to install, uses latest lamp technologies to save energy, reduces maintenance, and delivers output that s comfortable and adaptable to a wide range of requirements. Fast Lighting installations with Primata II can be completed within 40% of the time required for single luminaire installations Safe Primata II is pre-wired and tested, so good electrical connectivity and site safety are built-in Simple Primata II can be installed by non-skilled labour, without special tools, however the final electrical connection must be carried out by a qualified electrician Cost effective Primata II is the cost effective solution that benefits installers and end users alike Flexible Primata II is available in versions with up to 9-poles for mains power supply, dimming and emergency operation. Optics are available for virtually every application, and can be interchanged to suit any application 6

7 Performance, Efficiency, Comfort The aim of Thorn Lighting is to improve quality of life by lighting people and places. Supporting this mission is our PEC programme, through which we deliver efficient and reliable lighting and contribute to a healthy and comfortable environment The PEC programme is based on the three main factors in a lighting installation which affect the quality of life and our natural environment: Performance: Providing the best visual effectiveness Efficiency: Minimising the use of energy Comfort: Giving people satisfaction and stimulation These principles are embodied in the way we design our products as well as individual lighting schemes. By addressing all three factors we can make a dramatic improvement in the quality of life. Primata II has been designed to fulfil all criteria for achieving PEC in today s demanding environments, from its choice of light sources and simple installation to its virtually unlimited flexibility. Consistent, tool-free installation, plus a wide range of optics and integrated dimming and emergency options, make it a powerful tool in the drive towards lower costs and higher workplace efficiency. Performance Providing the best visual effectiveness Primata II has been designed for optimum performance in a wide range of applications, from industry and production to supermarkets and shops. Its overall flexibility, together with the optical performance of its many attachments, can easily be tailored to any lighting task. Its precisely calculated reflectors offer efficient and economical lighting, and asymmetric reflectors provide wall-washing or uniform vertical illumination. These are just some of the lighting tools which are incorporated into the Primata II concept. Equally important, the fittings can be interchanged to respond to changes in space design or function. This is a truely versatile system. As well as the optics on individual luminaires, entire luminaires can be replaced by track modules when a new lighting scheme requires 3-phase spotlighting, for example. Efficiency Minimising the use of energy Energy efficient artificial lighting helps to reduce carbon dioxide emissions into the atmosphere, and Primata II uses the latest technologies to set the pace in environmental sensitivity. With the latest lamp technology such as T16 high output and high efficiency lamps, LOR s of up to 95% and electronic and dimmable control gear, Primata II is perfectly prepared for this task. Time is another resource which Primata II can save. Its consistent, tool-free installation method offers enormous benefits for the installer, enabling more jobs to be completed within the same time frame. For end users, too, Primata II can enable a refurbishment to be completed far earlier than using conventional lighting concepts. Comfort Giving people satisfaction and stimulation With its choice of different louvre optics and other attachments, Primata II can provide the right combination of glare control, direct lighting and indirect distribution to create a comfortable and productive environment. The system can also incorporate lighting and emergency controls. Available as options in 7-pole and 9-pole systems, these offer huge advantages in terms of reduced maintenance and increased user friendliness, with straightforward installation. The secret is Primata II s pre-wired trunking, which already incorporates all necessary components. Now, a state-of-the-art lighting solution with integrated lighting and emergency controls can be fitted as easily as a conventional system. 7

8 Tool-free installation Each component of a Primata II installation is pre-built in the factory. Work on site is simply a matter of snapping the modules together. Untrained personnel can do this using their two-hands. No tools are required and rates of installation and productivity are impressive. 1. After the suspension element is fixed to the ceiling (wire suspension shown on this example), the trunking simply snaps onto the brackets. 2. Just a simple push and the pre-wired trunking is securely installed. Tool-free electrical and mechanical connection has been made between trunkings, due to its patented connector system. 3. Convenient phase selection inside the luminaire 4. Easy positioning and tool-free installation of the luminaire 5. Electrical and mechanical connection by one single operation just rotating the turnbuckle 6. Optics can now be installed via a simple snap-on mechanism 7. Just press the optic towards the system and the springloaded fixation mechanism retains it immediately 8. After attaching reflector end caps and couplers are put on, lamps can be fitted 9. Various louvres or optics can be conveniently added without the use of any tools 10. Congratulations you have just completed your first Primata II installation!

9 Electrical configuration 5-pole 5-poles configured for three-phase operation: Primata II supports load sharing to triple the maximum length of a continuous run, compared to standard single-phase environments. This is possible because each phase can be used to maximum loading. In addition, Primata II provides separate circuits which can be switched independantly for very basic lighting control. Compatible luminaires include CP - Switch Start Compensated, NC - Switch Start Non-Compensated and HF. 7-pole 7-poles configured for three-phase operation: Primata II enhances 5-pole capabilities by supporting additional dimming and/or standard emergency or SelfTest emergency lighting. These options are available with dimming and emergency versions HFD, HF E3, HF E3T, HFD E3, HFD E3T. L1 L2 L3 N E EN EL L1 L2 L3 N E D1 D2 EL EN L1 L2 L3 N E D1 D2 L1 L2 L3 N E * * * * LUMINAIRE CP, NC or HF LUMINAIRE HFD D1 D2 Unswitched L1 L2 L3 N * * E * * LUMINAIRE HF E3 or E3T LUMINAIRE HFD E3 or E3T * * * LUMINAIRE HF EX3 Electrical connection to the system if phase 2 or 3 selected Electrical safety Primata II uses dedicated connectors to achieve perfect electrical connections with optimum safety. There are no complicated electrical connections and no terminal blocks between luminaires and wiring. The turnbuckle mechanism ensures that once a connection is made, it stays secure. Standards Designed and manufactured to comply with EN Emergency version EN Class I Electrical IP20 IP40 with IP40 kit IP60 Industrial fitting (in preperation) 9-pole 9-poles configured for three-phase operation: Primata II can incorporate high-end emergency lighting. It is the ultimate in multi-functional (HF E3X) trunking and management. 9

10 Three-phase system For high load applications the three-phase design of Primata II offers enormous benefits. Every luminaire can be set to pick one of the phases by using a simple selector tab at the connector. Because this flexibility allows long uninterrupted runs, Primata II is the perfect solution for large buildings or long, narrow transport areas. These benefits are possible because of the characteristics of three-phase power. A balanced three-phase load minimises the reactive power (kva) drawn from the mains, reducing the amount of energy consumed. In addition, each luminaire is connected to one of the three phases, so most luminaires can be turned off at night or during periods of low requirement, while maintaining sufficient illumination in critical areas. Max load Maximum load recommendation for Miniature Circuit Breakers (MCB) For lighting installations the use of C type MCBs is recommended. The following table gives some typical values (recommendations) and is valid for one pole MCBs (single phase application) and a supply voltage of 230V. When using multi-pole MCBs (3-phase application) the number of ballasts has to be reduced by 20%. The table on right shows the maximum number of fittings which can be installed dependant on wattage and MCB. MCB C10 C13 C16 B10 B13 B16 1x36 T26 NC x36 T26 NC x58 T26 NC x58 T26 NC x36 T26 CP x36 T26 CP x58 T26 CP x58 T26 CP x36 T26 HF x36 T26 HF x58 T26 HF x58 T26 HF x36 T26 HFD x36 T26 HFD x58 T26 HFD x58 T26 HFD x28 T16 HF x28 T16 HF x35 T16 HF x35 T16 HF x54 T16 HF x54 T16 HF x80 T16 HF x80 T16 HF x28 T16 HFD x28 T16 HFD x35 T16 HFD x35 T16 HFD x54 T16 HFD x54 T16 HFD x80 T16 HFD x80 T16 HFD NC - Switch Start Non-Compensated CP - Switch Start Compensated HF - High Frequency HFD - High Frequency Dimmable Voltage (V) Time (milliseconds) L1 L1 L1 The sum of the currents on the three phases is zero at any time, therefore for a balanced load, the return current down the common neutral is zero as well 10

11 Complete control Dimming Lighting can be responsible for more than 20% of total electricity consumption. In office buildings it can account for as much as half of total energy costs. The use of lighting controls can reduce this figure by up to 25%, encouraging users to minimise wasteful use of light and make the maximum use of natural light using presence and/or daylight linked controls. This approach is in line with energy regulations such as the Energy Performance of Buildings Directive (EPBD) which is driving energy saving initiatives throughout Europe. Primata II is designed to support advanced indoor lighting controls without any additional installation effort. Emergency Just like fire protection systems, emergency lighting is potentially life saving provided it is properly maintained. Increasingly stringent legal requirements require owners to inspect, test and maintain emergency lighting in workplaces and public buildings. Primata II offers a wide range of compliant solutions. Its emergency product range includes basic (E3) self-contained luminaires as well as SelfTest (E3T) and Addressable test (E3X) emergency luminaires which are fully compliant with European Standards. The E3T and E3X systems deliver complete peace of mind and safety without the need for costly and time consuming manual testing by a competent person. Primata II can incorporate these luminaires without any additional effort. The following emergency options are available to suit varying requirements and budgets. The comparison table should help to decide which option is best for you, considering the project environment: E3 E3T E3X Self contained SelfTest Addressable test Automatic testing No Yes Yes EN 1838 (BS5266) compliance Yes Yes Yes Fault Indication Locally via LED on luminaire (battery charging only) Locally via LED on luminaire Centrally logged on Control Panel Fault Reports Generated Manually Manually Printed or via SMS text Programmable No No Yes Addressable No No Yes Typical Application Small to medium installations where manual checking is no problem for the user. For example: small storage areas, warehouses, workshops, shops, etc. Small to medium areas where automatic testing is beneficial but visual inspection of the luminaire is easily possible, such as galleries, supermarkets, offices, lower and medium industrial facilities, etc Medium and large sized projects where visual inspection of luminaires is impractical or undesirable. For example: Universities, schools and colleges, museums, large stores, supermarkets, DIY centres, offices, higher industrial facilities, warehouses, etc. 11

12 More than just a trunking system - special accessories Track Module The use of spotlights for accent lighting within a general lighting system is becoming increasingly popular in supermarkets, shops, showrooms and other spaces where items are on display. The Primata II Track Module enables spotlighting to be incorporated into a Primata II installation. Solutions such as Graffiti spotlights are highly effective. The Track Module maintains the modular design of the rest of the Primata II family and can therefore be easily integrated into any lighting design. It can also be removed and used elsewhere when the floor plan or lighting design is changed, without requiring trained electricians. Presence Detector An integrated Presence Detector module enables Primata II luminaires to be switched on only when needed. This is the simplest way to reduce energy consumption. Angle connectors Primata II L, T and X trunking connectors allow designers to create various shapes within continuous row systems. IP60 Industrial Optic In environments where airborne particles can leave deposits on lamps and reflectors, high IP ratings are essential to maintain LOR performance. Primata II with the IP60 (dust-tight) Industrial Optic offers this protection, extending cleaning and maintenance intervals, maintaining output levels, and reducing costs. It is an outstanding choice for any manufacturing application, including the automotive industry. 12

13 How to specify a Primata II lighting system The specification sheet will guide you through the ordering process of any Primata II configuration and will make sure that you don t miss that vital part it s very easy and most convenient! Using the fold out specification sheet At the back of the brochure you will find a fold out page which will give you a logical ordering flow. You can use this when browsing through the pages of the brochure to specify all the right parts for your individual system. Just simply follow Step 1 4 (or even 5 if additional accessories are wanted) to complete your ordering list. Step 1 Suspension brackets Select suspension brackets, which will be suitable for your application or building/installation environment. Turn to page 14 for Step 1 Ordering Guides. Step 2 Trunking and electrical connection Select trunking with 5, 7 or 9-pole wiring depending on which luminaire is to be used. Make sure the modularity of the trunking/ wiring specified matches the luminaire. Specify all other accessories, which might be needed in conjunction with the trunking or wiring (couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for Step 2 Ordering Guides. Step 3 Luminaires Specify the luminaire to go with the system, depending on the functionality (dimming, emergency) you need and wattage, which was considered when selecting the pre-wired trunking. If IP40 is required for the system, please select the correct IP40 kit. Turn to pages 18 and 19 for Step 3 Ordering Guides. Optics Step 4 Depending on what kind of light distribution or level of glare control is required within the application, select the particular optic in the right wattage. Dedicated end caps and couplers to be specified as well. Turn to pages for Step 4 Ordering Guides. Step 5 Optional Extras Additional accessories such as spotlight modules or presence detectors can also be specified. The only exception within the ordering process is the Industrial Optic IP60, where no separate luminaire or end caps etc. need to be specified (supplied as a complete fitting). Turn to pages 30 and 31 for Step 5 Ordering Guides. 13

14 Brackets and suspension Step 1 Direct ceiling installation Caddy clip Chain suspension bracket Adjustable chain suspension Suspension chain (per metre) Bracket for angled installation Wire suspension kit Catenary wire suspension Fixing brackets All fixing brackets attach tool-free to the trunking via a snap-on mechanism and a common stainless-steel quick-fix bracket Direct ceiling installation Caddy clip bracket for fastening on exposed ceiling carrier systems of 24mm - 26mm Chain suspension brackets, adjustable (FIX/CHA) and non adjustable triangle (FIX/CH) and galvanised suspension chain (CH) which is supplied in metres Maximum distance between suspension brackets is 3 metres Chain suspension brackets for angled installation, to allow axial rotation Wire suspension kits in three different lengths for tool-free height adjustment via clutch mechanism Catenary wire suspension for catenary wires up to 12mm diameter To specify state: Fixing bracket for trunking systems. As Thorn Primata II... Brackets and Suspension Ordering Guide (for complete luminaire follow ordering steps 1-5) Description SAP Code Direct Ceiling Installation Clip PR2 FIX** Caddy Clip PR2 FIX/CAD ** Chain suspension PR2 FIX/CH** Chain suspension bracket PR2 FIX/CHA ** Adjustable chain suspension bracket PR2 CH Suspension chain (per meter) PR2 FIX/CHRA** Bracket for angled installation (for axial rotation) Wire suspension kits PR2 MSW m wire suspension PR2 MSW m wire suspension PR2 MSW m wire suspension Catenary wire suspension PR2 FIX/CAT* * For catenary wires up to 12mm diameter ** One bracket per code 14

15 Trunking Step 2 Pre-wired Trunking Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Pre-wired trunking Pre-wired trunking with 5, 7 or 9-pole wiring integrated Wires in 2.5mm 2 Electrical connection points in modular distance for 36/58/28/54 or 35/49/80W Tool-free connection with unique connector (to be ordered separately) Materials/Finish Trunking: roll-formed sheet steel pre-painted white Installation/Mounting Trunking prepared for easy mechanical and electrical connection To specify state: 5, 7 or 9-pole, 2.5mm 2, pre-wired trunking with electrical connection points in modular distance for use with trunking system. As Thorn Primata II T TW Un-wired trunking Un-wired trunking for installing other Primata II accessories or different luminaires Tool-free connection with unique connector (to be ordered separately) To specify state: Unwired trunking. As Thorn Primata II T 60 T16 trunking 1175/350/ /950/445 5-pole Modular length for 1 fitting PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Modular length for 2 fittings PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Modular length for 3 fittings PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Pole Modular length for 1 fitting PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Modular length for 2 fittings PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Modular length for 3 fittings PR2 T TW x2,5/ PR2 T TW x2,5/ PR2 T TW x2,5/28/ PR2 T TW x2,5/35/49/ Pole Modular length for 1 fitting PR2 T TW x2,5/ PR2 T TW x2,5/35/49/ Modular length for 2 fittings PR2 T TW x2,5/ PR2 T TW x2,5/35/49/ Modular length for 3 fittings PR2 T TW x2,5/ PR2 T TW x2,5/35/49/ /45/ /305/4578 Un-wired Trunking Ordering Guide Description Weight (Kg) SAP Code PR2 T PR2 T PR2 T T26 trunking 15

16 Trunking accessories Trunking couplers Coupler for mechanical tool-free connection of trunking L, T and X couplers for mechanical tool-free connection of trunking Materials/Finish Coupler: galvanised steel with plastic cover (L, T and X only) Installation/Mounting Couplers for mechanical connection of trunking without the use of any tools To specify state: Trunking coupler (or L, T, X coupler) for trunking system. As Thorn Primata II T-C (L, T, X) Trunking end cap White plastic end caps for trunking ends to provide neat appearance and perfect alignment Tool-free and easy assembling Knock-out holes for cable entry To specify state: Plastic end-cap for trunking system. As Thorn Primata II ECP Grommet Rubber grommet to use on knock-outs at the back of the trunking to protect cable To specify state: Rubber grommet for trunking system. As Thorn Primata II GRM Cover strip Plastic cover strip in luminaire length to allow modular installation on pre-wired trunking (gaps in luminaires) Tool-free and easy assembling 85C fire retardant To specify state: Plastic cover strip in modular length. As Thorn Primata II CF 16

17 Step 2 Mains terminal Electrical feed Power feed for electrical connection for 5, 7 and 9-pole pre-wired trunking Plug-in terminals for mains power supply, dimming and emergency For 5-pole or 7-pole in conjunction with dimming, use PR2 TB/TRU 5/7 DIM Cable Fixings Cable cleat to fix additional internal wiring (CC) Cable clip to secure additional cables on top of the trunking (TCC) For 7-pole in conjunction with emergency use PR2 TB/TRU 5/7 EM For 9-pole use PR2 TB/TRU 9 To specify state: Electrical feed for 5, 7 and 9-pole pre-wired trunking for trunking systems. As Thorn Primata II TB/TRU CC TCC Additional wiring Additional 2-pole wiring set for 7-pole pre-wired trunking, to upgrade systems at a later date Wires in 2.5 mm 2 Electrical connection points in modular distance for 36/58/28/54 or 35/49/80W To specify state: 2-pole, 2.5mm 2, additional wiring with electrical connection points in modular distance for use with trunking systems. As Thorn Primata II TW Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Trunking Couplers PR2 T-C TRUNKING COUPLER PR2 T-CL L CONNECTOR PR2 T-CT T CONNECTOR PR2 T-CX X CONNECTOR Trunking Endcaps PR2 ECP Grommet PR2 GRM Cover Strip PR2 CF PR2 CF PR2 CF 28/ PR2 CF 35/49/ Mains terminal block for 5 and 7-pole PR2 TB/TRU 5/7 DIM PR2 TB/TRU 5/7 EM Mains terminal block for 9-pole PR2 TB/TRU Additional wiring PR2 TW 2x2,5/ PR2 TW 2x2,5/ PR2 TW 2x2,5/28/ PR2 TW 2x2,5/35/49/ Cable fixings PR2 CC CABLE CLEAT (INSIDE TRUNKING) PR2 TCC CABLE CLIP (ON TOP OF TRUNKING)

18 T16 Luminaires Step 3 Available in single and twin lamp (narrow) versions, where both versions can mostly use the same optic High-frequency ballasts Modular design accommodates options for lighting management and emergency lighting Simple phase selection for power supply and emergency/ dimming circuits Tool-free installation Thorn turnbuckles ensure electrical and mechanical connection in one step Lamps 28-80W T16 (FDH) linear fluorescent, Cap: G5 Materials/Finish Body: pre-painted white roll-formed sheet steel Lamp holder: injection moulded white plastic Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking, luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, optics easily clipped onto luminaire if required. To specify state: Single or twin (narrow) 28-80W T16 linear fluorescent luminaire for use with 5, 7 or 9-pole Primata trunking system and optics. As Thorn Primata II T16 luminaire. IP40 Kit for T16 luminaires: Can be fitted to any T16 luminaire or optic to increase the protection class to IP40. Two IP40 Kits have to be ordered per luminaire/optic. T16 single luminaire T16 Luminaire Ordering Guide Lamp(s) to be ordered separately (for complete luminaire follow ordering steps 1-5) Description Ilcos Socket Weight (Kg) SAP Code Emergency SelfTest Addressable Test Code E3 E3T E3X High Frequency PR2 1/28W T16 HF FDH G PR2 1/35W T16 HF FDH G PR2 1/49W T16 HF FDH G PR2 1/54W T16 HF FDH G PR2 1/80W T16 HF FDH G PR2 2/28W T16 HF FDH G PR2 2/35W T16 HF FDH G PR2 2/54W T16 HF FDH G PR2 2/49W T16 HF FDH G PR2 2/80W T16 HF FDH G High Frequency Dimmable PR2 1/28W T16 HFD FDH G PR2 1/35W T16 HFD FDH G PR2 1/49W T16 HFD FDH G PR2 1/54W T16 HFD FDH G PR2 1/80W T16 HFD FDH G PR2 2/28W T16 HFD FDH G PR2 2/35W T16 HFD FDH G PR2 2/54W T16 HFD FDH G PR2 2/49W T16 HFD FDH G PR2 2/80W T16 HFD FDH G T16 twin luminaire T16 single/twin luminaire IP40 Kit T16 (two needed per luminaire) PR2 IP40 KIT 1/T PR2 IP40 KIT 2/T

19 T26 Luminaires Step 3 Single and twin lamp versions can be used with dedicated optics Magnetic or high-frequency ballasts Modular design accommodates options for lighting management and emergency lighting Simple phase selection for power supply and emergency/ dimming circuits Tool-free installation Thorn turnbuckles ensure electrical and mechanical connection in one step Lamps 36-58W T26 (FD) linear fluorescent, Cap: G13 Materials/Finish Body: roll-formed sheet steel pre-painted white Lamp holder: injection moulded white plastic Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking. Luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket. System phase selection at connector. Optics easily clipped onto luminaire, if required. To specify state: Single or twin 36-58W T26 linear fluorescent luminaire for use with 5, 7 or 9-pole trunking system and optics. As Thorn Primata II T26 luminaire. IP40 Kit for T26 luminaires: Can be fitted to any T26 luminaire or optic to increase the protection class to IP40. Two IP40 Kits have to be ordered for a single lamp luminaire. Four kits for a twin lamp type. T26 single luminaire T26 Luminaires Ordering Guide Lamp(s) to be ordered separately (for complete luminaire follow ordering steps 1-5) Description Ilcos Socket Weight (Kg) SAP Code Emergency SelfTest AddressableTest Code E3 E3T E3X Magnetic ballasts PR2 1/36W T26 CP FD G PR2 1/58W T26 CP FD G PR2 2/36W T26 CP FD G PR2 2/58W T26 CP FD G PR2 1/36W T26 NC FD G PR2 1/58W T26 NC FD G PR2 2/36W T26 NC FD G PR2 2/58W T26 NC FD G High Frequency PR2 1/36W T26 HF FD G PR2 1/58W T26 HF FD G PR2 2/36W T26 HF FD G PR2 2/58W T26 HF FD G High Frequency Dimmable PR2 1/36W T26 HFD FD G PR2 1/58W T26 HFD FD G PR2 2/36W T26 HFD FD G PR2 2/58W T26 HFD FD G T26 twin luminaire T26 single luminaire 53 T26 twin luminaire 136 IP40 Kit T26* PR2 IP40 KIT T *Two needed per single and four needed per twin lamp luminaire CP - Compensated, NC - Non-compensated 19

20 White reflectors Suitable for T16 and T26 single and twin lamp luminaires (see pages 18 and 19) White plastic couplers and end caps provide neat appearance and perfect alignment Ideally suited to low mounting in industrial or utility areas which require high levels of uniform light Asymmetric reflectors for illumination of vertical surfaces Coupler for R and RLW White plastic coupler for reflector PR2 R and PR2 RLW to provide neat appearance and perfect alignment Simple, tool-free assembly One pair needed per junction End cap for R and RLW White plastic end cap for reflector PR2 R and PR2 RLW to provide neat appearance and perfect alignment Simple, tool-free assembly One pair needed per housing or uninterrupted continuous run End cap for RA White plastic end caps for reflector PR2 RA to provide neat appearance Simple, tool-free assembly One pair needed per housing Materials/Finish Reflector: sheet steel, white pre-painted finish End caps and couplers: injection moulded white finish Installation/Mounting Unique snap-in mechanism enables easy tool-free installation onto luminaire To specify state: White reflector for single or twin T16 and T26 luminaire for use with trunking system. As Thorn Primata II R To specify state: White reflector with white louvre grille for single or twin T16 and T26 luminaire for use with trunking system. As Thorn Primata II RLW To specify state: White asymmetric reflector for single/twin T16 or single T26 luminaire for use with trunking system. As Thorn Primata II RA White Reflectors Ordering Guide For complete luminare follow ordering steps 1-5 Description Weight (Kg) SAP Code White Reflector For use with single T26 luminaires PR2 R 1x PR2 R 1x For use with twin T26 luminaires PR2 R 2x PR2 R 2x For use with single or Twin T16 luminaires PR2 R 1/2x28/ PR2 R 1/2x35/49/ White Reflector with white louvres For use with single T26 luminaires PR2 RLW 1x PR2 RLW 1x For use with twin T26 luminaires PR2 RLW 2x PR2 RLW 2x For use with single or twin T16 luminaires PR2 RLW 1/2x28/ PR2 RLW 1/2x35/49/ Coupler for R and RLW PR2 R-C 1xT26 1/2xT16 Pair PR2 R-C 2xT26 Pair End Cap for R and RLW PR2 R-EC 1xT26 1/2xT16 Pair PR2 R-EC 2xT26 Pair White Asymmetric Reflector For use with single T26 luminaires PR2 RA 1x PR2 RA 1x For use with single or twin T16 versions PR2 RA 1/2x28/ PR2 RA 1/2x35/49/ Couplers for R and RLW End caps for R and RLW End caps for RA End Cap for RA PR2 RA-EC Pair ** (one pair needed per housing or uninterrupted continuous run) 20

21 Step T16 white reflector, single or twin T26 white reflector, single T16 white reflector with white louvre, single or twin T26 white reflector, twin T16 asymmetric white reflector, single or twin T26 white reflector with white louvre, single T26 white reflector with white louvre, twin T26 asymmetric white reflector, single 21

22 Aluminium reflectors Suitable for T16 and T26 single and twin lamp luminaires (see pages 18 and 19) One-piece aluminium reflector in Mirrorbrite finish provides excellent optical control Reflectors overlap to provide visually continuous system, no need for seperate end caps or couplers Ideally suited to high mounting in industrial and lower retail areas with demanding visibility requirements Wall washer for uniform vertical illumination Materials/Finish Reflector: roll-formed aluminium Mirrorbrite finish Installation/Mounting Reflector clips easily and tool-free onto luminaire via stainless steel bracket. Reflectors designed to overlap, ensuring perfect fit and alignment. To specify state: Wide beam Mirrorbrite aluminium reflector for single/ twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II WB. To specify state: Narrow beam Mirrorbrite aluminium reflector for single/ twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II NB. To specify state: Wallwasher Mirrorbrite aluminium reflector for single/twin T16 and single T26 luminaires for use with trunking system. As Thorn Primata II WA Aluminium Reflector Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Aluminium Reflector Wide Beam For use with single T26 luminaires PR2 WB 1x PR2 WB 1x For use with twin T26 luminaires PR2 WB 2x PR2 WB 2x For use with single or twin T16 luminaires PR2 WB 1/2x28/ PR2 WB 1/2x35/49/ Aluminium Reflector Narrow Beam For use with single T26 luminaires PR2 NB 1x PR2 NB 1x For use with twin T26 luminaires PR2 NB 2x PR2 NB 2x For use with single or twin T16 luminaires PR2 NB 1/2x28/ PR2 NB 1/2x35/49/ Aluminium Wallwasher For use with single T26 luminaires PR2 WA 1x PR2 WA 1x For use with single or twin T16 luminaires PR2 WA 1/2x28/ PR2 WA 1/2x35/49/

23 Step T16 aluminium wide beam reflector, single or twin T26 aluminium wide beam reflector, single T16 aluminium narrow beam reflector, single or twin T26 aluminium wide beam reflector, twin T16 aluminium reflector, wallwasher, single or twin T26 aluminium narrow beam reflector, single T26 aluminium narrow beam reflector, twin T26 aluminium reflector, wallwasher, single 23

24 Basic housings with mirror optics Suitable for T16 and/or T26 single and twin lamp luminaires (see pages 18 and 19) Choice of wide, asymmetric or double-sided asymmetric reflectors White plastic couplers and end caps available to provide neat appearance (see page 28) Ideal solutions for supermarkets and hyper-markets applications and shelf lighting Materials/Finish Housing: sheet steel, white pre-painted Integrated reflector: roll-formed Satinbrite aluminium End caps and couplers: injection moulded white plastic Installation/Mounting Unique snap-in mechanism enables easy tool-free installation onto luminaire To specify state: White basic housing with integrated wide beam Satinbrite aluminium reflector for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II HWB To specify state: White basic housing with integrated asymmetric Satinbrite aluminium reflector for single T26 luminaires for use with trunking system. As Thorn Primata II HA To specify state: White basic housing with integrated doublesided asymmetric Satinbrite aluminium reflector for twin T26 luminaires for use with trunking system. As Thorn Primata II HAD Basic housing with mirror optics Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Basic housing with wide beam optics For use with single T26 luminaires PR2 HWB 1x PR2 HWB 1x For use with twin T26 luminaires PR2 HWB 2x PR2 HWB 2x For use with single or twin T16 luminaires PR2 HWB 1/2x28/ PR2 HWB 1/2x35/49/ Basic housing with asymmetric mirror optics (single T26 only) PR2 HA 1x PR2 HA 1x Basic housing with double sided asymmetric mirror (twin T26 only) PR2 HAD 2x PR2 HAD 2x

25 Step T16 wide beam mirror, single or twin T26 wide beam mirror, single T26 wide beam mirror, twin T26 asymmetric mirror, single T26 double sided asymmetric mirror, twin 25

26 Basic housings with louvre optics Step 4 26 Suitable for T16 and T26 single and twin lamp luminaires (see page 18 and 19) Choice of white painted steel, perforated white steel, Satinbrite aluminium or Mirrorbrite aluminium louvres to control glare Satinbrite and Mirrorbrite louvres comply with EN guidelines for modern VDT screens (depending on the wattage used with the optic) White plastic couplers and end caps available to provide neat appearance (see page 28) Ideally suited to retail, commercial and production areas with VDT screens Microperforated versions create a more comfortable environment with additional ambient lighting Materials/Finish Housing: sheet steel, white pre-painted with roll-formed aluminium reflector inserts Louvre: Satinbrite, Mirrorbrite aluminium or white painted steel or perforated End caps and couplers: injection moulded white plastic Installation/Mounting Unique snap-in mechanism enables easy tool-free installation onto luminaire To specify state: White basic housing with Satinbrite louvre for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II HLS To specify state: White basic housing with Mirrorbrite louvre for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II HLM To specify state: White basic housing with white painted steel louvre for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II HLW To specify state: White perforated basic housing with white perforated steel louvre for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II HLW PF Basic housing with louvre optics Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Basic housing with Satinbrite louvres For use with single T26 luminaires PR2 HLS 1x PR2 HLS 1x For use with twin T26 luminaires PR2 HLS 2x PR2 HLS 2x For use with single or twin T16 luminaires PR2 HLS 1/2x28/ PR2 HLS 1/2x35/49/ Basic housing with Mirrorbrite louvres For use with single T26 luminaires PR2 HLM 1x PR2 HLM 1x For use with twin T26 luminaires PR2 HLM 2x PR2 HLM 2x For use with single or twin T16 luminaires PR2 HLM 1/2x28/ PR2 HLM 1/2x35/49/ Basic housing with White louvres For use with single T26 luminaires PR2 HLW 1x PR2 HLW 1x For use with twin T26 luminaires PR2 HLW 2x PR2 HLW 2x For use with single or twin T16 luminaires PR2 HLW 1/2x28/ PR2 HLW 1/2x35/49/ Perforated basic housing with white perforated louvre For use with single T26 luminaires PR2 HLW PF 1x PR2 HLW PF 1x For use with twin T26 luminaires PR2 HLW PF 2x PR2 HLW PF 2x For use with single or twin T16 luminaires PR2 HLW PF 1/2x28/ PR2 HLW PF 1/2x35/49/

27 T16 Satinbrite louvre, single or twin T26 Satinbrite louvre single T16 Mirrorbrite louvre, single or twin T26 Satinbrite louvre twin T16 white louvre single T26 Mirrorbrite louvre single T16 perforated and white perforated louvre single or twin T26 Mirrorbrite louvre twin T26 white or perforated housing with white or perforated louvre, single T26 white or perforated housing with white or perforated louvre, twin 27

28 Basic housings accessories Step 4 Coupler for basic housing optics White plastic coupler for all basic housing optics to provide neat appearance and perfect alignment Simple, tool-free assembly One pair needed per junction End cap for basic housing optics White plastic end caps for all basic housing optics to provide neat appearance and perfect alignment Tool-free and easy assembling One pair needed per housing or uninterrupted continuous run Basic housing accessories Ordering Guide (for complete luminaire follow ordering steps 1-5) Description SAP Code Coupler for all basic housing optics (one pair needed per junction) For use with single T26 versions PR2 H-C 1xT26 Pair For use with twin T26 versions PR2 H-C 2xT26 Pair For use with single or twin T16 versions PR2 H-C 1/2xT16 Pair Endcaps for all basic housing optics (one pair needed per housing or uninterrupted continuous run) For use with single T26 versions PR2 H-EC 1xT26 Pair For use with twin T26 versions PR2 H-EC 2xT26 Pair For use with single or twin T16 versions PR2 H-EC 1/2xT16 Pair

29 29

30 Optional extras Wire guard Suitable for T16 and T26 single and twin lamp luminaires Can be hinged for lamp replacement For mechanical lamp protection ideal in low storage areas Materials/Finish Rods: polished galvanised steel Fixing brackets: aluminium Installation/Mounting Tool-free fixing via two aluminium brackets To specify state: Wire guard made of polished galvanised steel for single/twin T16 and T26 luminaires for use with trunking system. As Thorn Primata II WG T26 wire guard, single T26 wire guard, twin T16 Wire guard, single/twin Spotlight modules Module with integrated three-phase track in modular lengths Standard spotlights for threephase track can be installed Simple phase selection for power supply Tool-free installation Thorn turnbuckles for one-step electrical and mechanical connection Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts Installation/Mounting Module prepared for easy installation into pre-wired trunking, unit attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, spotlights to be installed as in any standard three-phase track system To specify state: three-phase track module in modular lengths, for use on 5, 7 or 9-pole trunking system. As Thorn Primata II TM 1175/ T / T26 570/760 Spolight not supplied Fixing kit for fluorescent fittings Fixing kit for other fluorescent fittings on unwired trunking (FF) 30

31 Step 5 Presence detector module Module with an integrated presence detector Switching capacity W Surveillance range: 22 Max Distance: 16 metres 6 time stages from 1sec. up to approx. 8mins. Tool-free installation Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts Installation/Mounting Module prepared for easy installation onto trunking, electrical connection via piano key terminal block To specify state: Presence detection module for use on trunking system. As Thorn Primata II SLDP Industrial unit IP60 Complete single or twin 58W fitting (no separate luminaire needs to be ordered) High-frequency ballasts Integrated aluminium reflector for symmetrical or asymmetrical distribution IP60 (dust-tight) protected lamp/reflector area to avoid a decrease in LOR due to dust Convenient tool-free phase selection Plastic cover panel (PC) held by galvanised frame One-step electrical and mechanical connection via external turnbuckle Ideal solution for dusty industrial applications and automotive industry Materials/Finish Housing: white painted sheet steel with plastic cover panel (polycarbonate) held by galvanised metal frame Installation/Mounting Tool-free installation onto trunking system via external turnbuckle mechanism To specify state: Complete 1/2x58W luminaire, high frequency ballast, IP60, integrated aluminium reflector for symmetrical/asymmetrical distribution, polycarbonate cover panel held by galvanised frame for tool-free installation for use with trunking system. As Thorn Primata II I PC Industrial Optic Ordering Guide complete fitting - no separate luminaire required. T26 Lamps to be ordered seperately. Description Ilcos Socket Wt (Kg) SAP Code Code Symmetric PR2 I PC 1x58W HF SYM IP60 FD G PR2 I PC 2x58W HF SYM IP60 FD G Asymmetric PR2 I PC 2x58W HF ASYM IP60 FD G PR2 I PC 1x58W HF ASYM IP60 FD G Optional Extras Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Wt (Kg) SAP Code Wire Guards For use with single T26 luminaires PR2 WG 1x PR2 WG 1x For use with twin T26 luminaires PR2 WG 2x PR2 WG 2x For use with single or twin T16 luminaires PR2 WG 1/2x28/ PR2 WG 1/2x35/49/ Description Wt (Kg) SAP Code Spotlight modules 3-phase module 1226 PR2 TM phase module 1526 PR2 TM phase module 1175 PR2 TM 28/ phase module 1475 PR2 TM 35/49/ Presence detector module PR2 SLDP Fixing kit for other fluorescent fittings PR2 FF

32 Photometric data T16 Luminaires Primata II PR2 Primata II PR2 Lamp: 1x 35W T16 ULOR: Lamp: x 35W DLOR: T LOR: 0.99 ULOR: 0.23 DLOR: 0.75 LOR: 0.99 Primata II PR2 Primata II PR2 Lamp: 1x 35W T16 Lamp: ULOR: x 35W DLOR: T LOR: 0.99 ULOR: 0.22 DLOR: 0.75 LOR: 0.97 Primata II PR2+R Primata II PR2+R Lamp: 1x 35W T16 Lamp: ULOR: 1x W DLOR: T LOR: 0.99 ULOR: 0.0 DLOR: 0.99 LOR: 0.99 Primata II PR2+R Primata II PR2+RLW Lamp: 1x 35W T16 Lamp: ULOR: 1x W DLOR: T LOR: 0.99 ULOR: 0.0 DLOR: 0.9 LOR: Primata II PR2+RA Lamp: Primata 1x II 35W PR2+RA T16 ULOR: Lamp: x 35W DLOR: T LOR: 0.93 ULOR: 0.18 DLOR: 0.75 LOR: 0.93 Primata II PR2+WB Primata Lamp: 1x II 35W PR2+WB T16 Lamp: ULOR: 1x 0.035W DLOR: T LOR: 1.04 ULOR: 0.0 DLOR: 1.03 LOR: 1.04 Primata II PR2+NB Lamp: Primata 1x II 35W PR2+NB T16 ULOR: Lamp: 0.0 1x 35W DLOR: T LOR: 0.99 ULOR: 0.0 DLOR: 0.99 LOR: 0.99 Primata II PR2+WA Primata Lamp: 1x II 35W PR2+WA T16 Lamp: ULOR: 1x 0.035W DLOR: T LOR: 1.02 ULOR: 0.0 DLOR: 1.02 LOR: Primata II PR2+HWB Primata Lamp: 1x II 35W PR2+HWB T16 Lamp: ULOR: 1x 0.035W DLOR: T LOR: 0.85 ULOR: 0.0 DLOR: 0.85 LOR: 0.85 Primata II PR2+HLW PF Primata Lamp: 1x II 35W PR2+HLW T16 PF Lamp: ULOR: 1x W DLOR: T LOR: 0.84 ULOR: 0.12 DLOR: 0.72 LOR: 0.84 Primata II PR2+HLS Lamp: Primata 1x II 35W PR2+HLS T16 ULOR: Lamp: 0.0 1x 35W DLOR: T LOR: 0.74 ULOR: 0.0 DLOR: 0.74 LOR: 0.74 Primata II PR2+HLM Primata Lamp: 1x II 35W PR2+HLM T16 Lamp: ULOR: 1x 0.035W DLOR: T LOR: 0.76 ULOR: 0.0 DLOR: 0.76 LOR:

33 T26 Luminaires Primata II PR2 Primata II PR2 Lamp: 1x 58W T26 Lamp: ULOR: 1x W DLOR: T LOR: 0.96 ULOR: 0.29 DLOR: 0.67 LOR: 0.96 Primata II PR2 Primata II PR2 Lamp: 2x 58W T26 Lamp: ULOR: 2x W DLOR: T LOR: 0.97 ULOR: 0.38 DLOR: 0.59 LOR: 0.97 Primata II PR2+R Primata II PR2+R Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.83 ULOR: 0.0 DLOR: 0.83 LOR: 0.83 Primata II PR2+RLW Primata II PR2+RLW Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.74 ULOR: 0.0 DLOR: 0.73 LOR: Primata II PR2 Primata II PR2+RA Lamp: 1x 58W T26 Lamp: ULOR: 1x W DLOR: T LOR: 0.96 ULOR: 0.19 DLOR: 0.63 LOR: 0.82 Primata II PR2+WB Primata II PR2+WB Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.80 ULOR: 0.0 DLOR: 0.80 LOR: 0.80 Primata II PR2+NB Primata II PR2+NB Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.83 ULOR: 0.0 DLOR: 0.83 LOR: 0.83 Primata II PR2+WA Primata II PR2+WA Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.87 ULOR: 0.0 DLOR: 0.87 LOR: Primata II PR2+HA Primata II PR2+HA Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.71 ULOR: 0.0 DLOR: 0.71 LOR: 0.71 Primata II PR2+HAD Primata II PR2+HAD Lamp: 2x 58W T26 Lamp: ULOR: 2x 0.058W DLOR: T LOR: 0.74 ULOR: 0.0 DLOR: 0.74 LOR: 0.74 Primata II PR2+HLS Primata II PR2+HLS Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.60 ULOR: 0.0 DLOR: 0.60 LOR: 0.60 Primata II PR2+HLM Primata II PR2+HLM Lamp: 1x 58W T26 Lamp: ULOR: 1x 0.058W DLOR: T LOR: 0.66 ULOR: 0.0 DLOR: 0.66 LOR:

34 Suspension brackets Select suspension brackets, which will be suitable for your application or building/installation environment. Turn to page 14 for Step 1 Ordering Guides. Trunking and electrical connection Select trunking with 5, 7 or 9-pole wiring depending on which luminaire is to be used. Make sure the modularity of the trunking/ wiring specified matches the luminaire. Specify all other accessories, which might be needed in conjunction with the trunking or wiring (couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for Step 2 Ordering Guides. Luminaires Specify the luminaire to go with the system, depending on the functionality (dimming, emergency) you need and wattage, which was considered when selecting the pre-wired trunking. If IP40 is required for the system, please select the correct IP40 kit. Turn to pages 18 and 19 for Step 3 Ordering Guides. Optics Depending on what kind of light distribution or level of glare control is required within the application, select the particular optic in the right wattage. Dedicated end caps and couplers to be specified as well. Turn to pages for Step 4 Ordering Guides. Optional Extras Additional accessories such as spotlight modules or presence detectors can be specified as well. The only exception within the ordering process is the Industrial Optic IP60, where no separate luminaire or end caps etc. need to be specified (supplied as a complete fitting). Turn to pages 30 and 31 for Step 5 Ordering Guides.

35 Step 1 Direct ceiling installation Caddy clip Chain suspension bracket Adjustable chain suspension Suspension chain (per meter) Bracket for angled installation Wire suspension kits Catenary wire suspension Suspension brackets Step 2 Pre-wired trunking Un-wired trunking Trunking end cap Trunking coupler Trunking coupler L Trunking coupler T Trunking coupler X Trunking and electrical connection Step 3 T16 Single T16 Twin T26 Single T26 Twin IP40 Kit T16 IP40 Kit T26 Luminaires Step 4 T16 White single or twin T16 White + white louvres single/twin Couplers End caps T16 White asymmetric single/twin Optics T16 Reflectors T16 Wide beam mirror single/twin T16 White louvre single/twin T16 Perforated + white perforated louvre single/twin T16 Satinbrite louvre single/twin T16 Mirrorbrite louvre single/twin Couplers T16 Basic housing T26 White single T26 White twin T26 White + white louvres single T26 White + white louvres twin Couplers End caps T26 Reflectors T26 Wide beam mirror single T26 Wide beam mirror twin T26 Asymmetric mirror single T26 Double sided asymmetric mirror twin T26 White louvre single T26 White louvre twin T26 Perforated + white perforated louvre single T26 Perforated + white perforated louvre twin T26 Basic housing Step 5 Industrial optic IP60 Spotlight modules Presence detector module Fixing kit for other fluorescent fittings T16 Wire guards T26 Wire guards Optional extras /671/633/