Piezoelectric Ceramic Sensors (PIEZOTITEr)
|
|
|
- Frank Reed
- 6 years ago
- Views:
Transcription
1 Piezoelectric Ceramic Sensors (PIEZOTITEr) Ultrasonic Sensors Open Structure Type Features. Compact and light weight. 2. High sensitivity and sound pressure. 3. Less power consumption. 4. High reliability. Case (Plastic) ø6.0±0. 2.0±0. Applications Burglar alarms, Range finders, Automatic doors, Remote control. MA40B8R/S 2-ø.2±0. 0.0± ±.0 : EIAJ Code : R or S 2-ø0.64 ±0..0± ±.0 7.±0.3 ø9.9±0.3 p ±0..0±0.2 ø9.9±0.3 7.±0.2.0±0.2 MA40S4R/S : EIAJ Code : R or S MA40S Sealed by Silicone glue * * : EIAJ Code () Part Number Construction Using Method Nominal Freq. (khz) Overall (mvp-p) MA40B8R Open struct. Receiver typ. S.P.L. Direc tivity ( ) Cap. (pf) Operating Temp. Range ( C) Detectable Range (m) Resolu tion (mm) Max. (Vp-p) to to MA40B8S Open struct. Transmitter typ to to Continuous signal MA40S4R Open struct. Receiver typ to to MA40S4S Open struct. Transmitter typ. MA40S Open struct. Dual Use typ to to typ to 8 0. to 2 9 Distance:cm, Overall sensitivity:0db=0vp-p, :0dB=Vrms/µbar, Sound pressure level:0db=2x0-4 µbar, µbar=0.pa The sensor can be used in the operating temperature range. Please refer to the individual specification for the temperature drift of /Sound pressure level or environmental characteristics in that temperature range. Directivty, detectable range and resolution are typical values. They can be changed by application circuit and fixing method of the sensor. 20 Continuous signal 20 Pulse width 0.4ms Interval 00ms 8
2 Directivity in MA40B8R MA40S4R 0 0 Directivity in S. P. L. Directivity in S. P. L. MA40B8S MA40S4S Directivity in Overall MA40S Beam Pattern
3 S. P. L. -Freq. Characteristics MA40B8R MA40S4R Freq. Characteristics MA40B8S MA40S4S Sound Pressure Level Sound Pressure Level
4 Water Proof Type Symmetric Directivity Features. Compact and light weight. 2. High sensitivity and sound pressure. 3. Less power consumption. 4. High reliability. (ø0.4) 0±2 2.0±0. ø8.0±0. Applications Back sonar of automobiles, Parking meters, Water level meters. MA40E7R/S 2-ø.2±0. 0.0± ±.0 : EIAJ Code : R or S (ø0.4) ø8.0±0. 0±2 2.0±0. 2-ø.2±0. 0.0± ±.0 MA40E7S- Connected to sensor housing Red marking : EIAJ code () Ø4±0.3 (Ø0.4) diam.0±0. (diam.8.6) Aluminum black case MA40E ± 8±0.3 Lead wire : AWG, Red, Black Connector Pitch : 2mm : EIAJ code MA40MC0-B #.0 ±0. 42 ± ±0. Lead wire AWG red, black Connector Pitch : 2mm #: EIAJ code () () Part Number Construction Using Method Nominal Freq. (khz) Overall MA40E7R Water proof Receiver min. MA40E7S Water proof Transmitter MA40E7S- Water proof Dual Use 40 - MA40E8-2 Water proof Dual Use 40 - MA40MC0-B Water proof Dual Use 40 - S.P.L. Direc tivity ( ) Cap. (pf) Operating Temp. Range ( C) Detectable Range (m) Resolu tion (mm) Max. (Vp-p) to to min. -72 min. 06 min. : reference only -8 min. -86 min. 06 min. 04 min to to to to to to typ to to. 9 Distance:cm, Overall sensitivity:0db=0vp-p, :0dB=Vrms/µbar, Sound pressure level:0db=2x0-4 µbar, µbar=0.pa The sensor can be used in the operating temperature range. Please refer to the individual specification for the temperature drift of /Sound pressure level or environmental characteristics in that temperature range. Directivty, detectable range and resolution are typical values. They can be changed by application circuit and fixing method of the sensor. 00 Pulse width 0.4ms Interval 00ms 00 Pulse width 0.4ms Interval 00ms 60 Pulse width 0.8ms Interval 60ms 60 Pulse width 0.8ms Interval 60ms 2
5 Directivity in MA40E7R Directivity in S. P. L. MA40E7S 0 0 Directivity in Overall MA40E7S- MA40E MA40MC0-B Beam Pattern S. P. L. -Freq. Characteristics MA40E7R -Freq. Characteristics MA40E7S Sound Pressure Level
6 Water Proof Type Asymmetric Directivity Features. Compact and light weight. 2. High sensitivity and sound pressure. 3. Less power consumption. 4. High reliability.. Compressed directivity by itself Applications Vack sonar of automobiles, Parking meters, Water level MA40E9- meter ø8 Aluminum Black Case 39± 3 0 Lead wire AWG Red. Black Connector Pitch : 2mm Tol. : 0.mm Aluminum Black Case 3±0. 40± 9±0. MA40MF4-B 2±0.2 4±0. Lead wire : AWG, Red, Black Connector Pitch : 2mm : EIAJ code () Part Number Construction Using Method Nominal Freq. (khz) Overall MA40E9- Water proof Dual Use 40 - MA40MF4-B Water proof Dual Use min. -87 min. S.P.L. 03 min. 03 min. Direc tivity ( ) 00 x0 0 x0 Cap. (pf) Operating Temp. Range ( C) Detectable Range (m) Resolu tion (mm) to to to to. 9 The sensor can be used in the operating temperature range. Please refer to the individual specification for the temperature drift of /Sound pressure level or environmental characteristics in that temperature range. Directivty, detectable range and resolution are typical values. They can be changed by application circuit and fixing method of the sensor. Max. (Vp-p) 60 Pulse width 0.8ms Interval 60ms 60 Pulse width 0.8ms Interval 60ms Directivity in Overall MA40E9- MA40MF4-B Horizontal Horizontal 0 0 Vertical - Vertical
7 High-frequency Type Features Using longitudinal vibration and matching with the air by acoustic matching layer, this type realized high sensitivity. Because of short wavelength, this type has sharp directivity and can be used high precise measurement. Acoustic Matching Layer (Plastic) Aluminum Case 40± 8±2 3± ø47±0. 24.±0.2 Shielded Wire (ø2.0) Applications Approach switch for FA, Distance meter, Water or liquid level meters. MA80A EIAJ Code ø8.7±0. Acoustic Matching Layer (Plastic) ø.0±0. Acoustic Matching Layer (Plastic) EIAJ Date Code Aluminum Case 0.3±0.2 MA200A Aluminum Case M- (+) ( ) 2-ø0.8±0.2 ±0. 6±.0 0.6±0..±.0 MA400A EIAJ Date Code (+) ( ) 2-ø0.8±0.2 ±0. 6±.0.±.0 Part Number MA80A MA200A MA400A Construction High frequency type High frequency type High frequency type Using Method Dual Use Dual Use Dual Use Nominal Freq. (khz) 7 +/ / /-20 Overall -47 min. 0dB=8Vpp (at 0cm) -4 min. 0dB=8Vpp (at 20cm) -74 min. 0dB=8Vpp (at 0cm) S.P.L. Direc tivity ( ) Cap. Operating Temp. Range ( C) Detectable Range (m) Resolu tion (mm) to to to to to to 0.3 The sensor can be used in the operating temperature range. Please refer to the individual specification for the temperature drift of /Sound pressure level or environmental characteristics in that temperature range. Directivty, detectable range and resolution are typical values. They can be changed by application circuit and fixing method of the sensor. Max. (Vp-p) 20 Pulse width 0.6ms Interval 0ms 20 Pulse width 20µs Interval 20ms 20 Pulse width 2µs Interval 0ms Directivity in Overall MA_A Series
8 Data/Notice/Part Numbering Test Circuit Receiver Transmitter OSC. Sp S.C.M. Amp. OSC. S.C.M. Amp. cm RL cm F.C. Anechoic Room F.C. Anechoic Room RL : 3.9kΩ : Ultrasonic Sensor S.C.M. : Standard Capacitor Microphone(Brüel&Kjær 43) Amp. OSC. Sp. F.C. : Amplifier : Oscillator : Tweeter : Frequency Counter (Brüel&Kjær 260) S.C.M. Amp. F.C. : Ultrasonic Sensor (Brüel&Kjær 43) : Standard Capacitor Microphone (Brüel&Kjær 260) : Amplifier : 0 Vrms : Frequency Counter Dual Use F.G. T.G. O.S. RL cm Anechoic Room RC RL : 3.9kΩ RC=kΩ : Ultrasonic Sensor T.G. : Target F.G. : Function Generator O.S. : Oscilloscope Notice (Soldering and Mounting). Pay attention to the mounting position as these sensors have directivity. 2. Please avoid applying DC-bias by connecting DC blocking capacitor or some other way because, otherwise, the component may be damaged. 3. Do not use in water. o Part Numbering Ultrasonic Sensors The structure of the "Global Part Numbers" that have been adopted since June 200 and the meaning of each code are described herein. ( If you have any questions about details, inquire at your usual Murata sales office or distributor. ) (Global Part Number) MA q 40MF w 4 e -N r -M t qproduct ID wseries echaracteristics rindividual Specification Code tpackaging * Global Part Number shows only an example which might be different from actual part number. * Any other definitions than "qproduct ID" might have different digit numbers from actual Global Part Number. 2
Ultrasonic Sensor. Application Manual. Cat.No.S15E-5. S15E.pdf Murata Manufacturing Co., Ltd. !Note
This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice.
Product Specification for Reference Only
1/7 Product Specification for Issued Date: 01 July, 2013 Rev. : I P art D e s c r i p t i o n : U l t r a s o n i c S e n s o r M U R A T A P art N o. : M A 4 0 M F 1 4-0 B The product specification in
"L" Series. Open Face Piezo Transducers. Dimensions: Dimensions are in mm
Dimensions: Dimensions are in mm Specification 4LR1 4LT1 Center Frequency Bandwidth (-6dB) 4LR1 4LT1 Transmitting Sound Pressure Level at 4Khz; db re 2µbar per 1 at 3cm Receiving Sensitivity at 4Khz db
15-2 Nan-ei-cho, Tottori-shi JAPAN TEL FAX URL
Air Transmission Ultrasonic Sensor 152 Naneicho, Tottorishi 6891193 JAPAN TEL 81857 535741 FAX 81857533675 Email utsales@nicera.co.jp URL http://www.nicera.co.jp Features Air transmission ultrasonic sensors
Dual operational amplifier
DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use
Rotary Sensors. Single Phase Output Type
!Note S5E.pdf.5.1 Single Phase Output Type 1 1. Sensing over wide range of rotation speed including a complete halt.. Compact package and light weight.. Simple installation by easy adjusting of a signal
Piezoelectric Sound Components
Sound Components Application Manual Cat.No.P1E-7 Murata Manufacturing Co., Ltd. Introduction Murata is active in R&D of new electronic components, seeking infinite possibilities with ceramic materials.
GP1UM26XK/GP1UM27XK Series GP1UM28XK/GP1UM28YK Series
GPUM26XK/GPUM27XK Series GPUM28XK/GPUM28YK Series Compact IR Detecting Unit for Remote Control Features. Compact (case volume). 2. Various B.P.F. (Band Pass Frequency) frequency to meet different user
CA-550 Series / CA-650 Series
WIDEBAND CURRENT AMPLIFIER CA- SERIES / CA-6 SERIES CA- Series / CA-6 Series CA- Series and CA-6 Series are low noise wideband current amplifiers (current to voltage converter) with a high gain. There
Fast Buffer LH0033 / LH0033C. CALOGIC LLC, 237 Whitney Place, Fremont, California 94539, Telephone: , FAX:
Fast Buffer / C FEATURES Slew rate............................... V/µs Wide range single or dual supply operation Bandwidth.............................. MHz High output drive............... ±V with Ω
Low Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS
OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 Low Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS FEATURES LOW QUIESCENT CURRENT: 3µA/amp OPA3 LOW OFFSET VOLTAGE: mv max HIGH OPEN-LOOP GAIN: db min HIGH
PIEZOELECTRIC SOUND COMPONENTS APPLICATION MANUAL
SOUND COMPONENTS APPLICATION MANUAL Murata Manufacturing Co., Ltd. Introduction Murata is active in R&D of new electronic components, seeking infinite possibility of ceramic materials. Particularly, as
SPS-448 Series. Receiver Pre-amp Module for Infrared Remote Control. SPS-448 Series. Features. SANYO Electric Co.,Ltd. Semiconductor Company
Receiver Pre-amp Module for Infrared Remote Control Features This is an unified module consisting of a PIN photodiode and receiver pre-amp IC. It is a compact type, not necessary to mount outer part, and
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
LMC6762 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output
LMC6762 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output General Description The LMC6762 is an ultra low power dual comparator with a maximum supply current of 10 µa/comparator.
80 khz Cylindrical Ultrasound Transducer
Omni-directional Horizontal Beam Directivity Broad Bandwidth Low Resonance Q Excellent Impact Resistance Lightweight Low Cost Piezoelectric Film (PVDF) 80 khz Ultrasound Transducers offer unique advantages
Integrated Dual-Axis Gyro IDG-500
Integrated Dual-Axis Gyro FEATURES Integrated X- and Y-axis gyros on a single chip Two separate outputs per axis for standard and high sensitivity: X-/Y-Out Pins: 500 /s full scale range 2.0m/ /s sensitivity
TL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER FEATURES OPERATION UP TO 00kHz EXCELLENT LINEARITY ±0.0% max at 0kHz FS ±0.0% max at 00kHz FS V/F OR F/V CONVERSION MONOTONIC VOLTAGE OR CURRENT
LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier
Dual High Performance, High Fidelity Audio Operational Amplifier General Description The is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully
Integrated Dual-Axis Gyro IDG-1215
Integrated Dual-Axis Gyro FEATURES Integrated X- and Y-axis gyros on a single chip ±67 /s full-scale range 15m/ /s sensitivity Integrated amplifiers and low-pass filter Auto Zero function Integrated reset
Micropulse position measuring Micropulse
130 Non-contact replacement for troublesome linear potentiometers Fast update rate for quick movements Analog voltage and current output versions available Micropulse position measuring Micropulse system
CMOS Integrated DTMF Receiver. Applications. Block Diagram V REF INH HIGH GROUP FILTER DIGITAL DETECTION ALGORITHM ZERO CROSSING DETECTORS
CMOS Integrated DTMF Receiver Features Full DTMF receiver Less than mw power consumption Industrial temperature range Uses quartz crystal or ceramic resonators Adjustable acquisition and release times
GP1UD26XK Series/GP1UD27XK Series GP1UD28XK Series/GP1UD28YK Series
GP1UD26XK Series/GP1UD27XK Series/GP1UD28XK Series/GP1UD28YK Series GP1UD26XK Series/GP1UD27XK Series GP1UD28XK Series/GP1UD28YK Series Features 1. Low dissipation current:max.2µa (at V CC =3V) (1/12 of
T40B. Torque Flange. Special features. Data sheet. Overall concept
T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal
CONNECTION DIAGRAMS TO-99 (H) Package. 8-Lead Plastic Mini-DIP (N) 8-Lead SOIC (R) Package and 8-Lead Cerdip (Q) Packages
FEATURES AC PERFORMANCE 500 ns Settling to 0.01% for 10 V Step 1.5 s Settling to 0.0025% for 10 V Step 75 V/ s Slew Rate 0.0003% Total Harmonic Distortion (THD) 13 MHz Gain Bandwidth Internal Compensation
INTERFERENCE OF SOUND WAVES
01/02 Interference - 1 INTERFERENCE OF SOUND WAVES The objectives of this experiment are: To measure the wavelength, frequency, and propagation speed of ultrasonic sound waves. To observe interference
LM6142 and LM MHz Rail-to-Rail Input-Output Operational Amplifiers
LM6142 and LM6144 17 MHz Rail-to-Rail Input-Output Operational Amplifiers General Description Using patent pending new circuit topologies, the LM6142/44 provides new levels of performance in applications
Ultrasonic Proximity Sensor/Module for Water Proof Types of Ultrasonic Sensors (HG-P40WP)
for Water Proof Types of Ultrasonic Sensors (HG-P40WP) HG-P40WP Specification Input DC (V) Frequency (khz) Detectable Range in Distance (m) Size (mm) Current Consumption (ma) for DC 12 V Input Features
Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR115
Overview The DSR115 is a compact, high-power 15" 2-way active loudspeaker system capable of achieving 136dB maximum peak SPL output. Equipped with high performance 48-bit DSP and top quality 1500W (LF
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
Precision, Low Power, Micropower Dual Operational Amplifier OP290
Precision, Low Power, Micropower Dual Operational Amplifier OP9 FEATURES Single-/dual-supply operation:. V to 3 V, ±.8 V to ±8 V True single-supply operation; input and output voltage Input/output ranges
SG1524/SG2524/SG3524 REGULATING PULSE WIDTH MODULATOR DESCRIPTION FEATURES HIGH RELIABILITY FEATURES - SG1524 BLOCK DIAGRAM
SG54/SG54/SG54 REGULATING PULSE WIDTH MODULATOR DESCRIPTION This monolithic integrated circuit contains all the control circuitry for a regulating power supply inverter or switching regulator. Included
Features At V S e 5V Typ unless noted Y Rail-to-rail input CMVR b0 25V to 5 25V. Y Rail-to-rail output swing 0 005V to 4 995V
LM6142 Dual and LM6144 Quad High Speed Low Power 17 MHz Rail-to-Rail Input-Output Operational Amplifiers General Description Using patent pending new circuit topologies the LM6142 44 provides new levels
Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR112
Overview The DSR112 is the most compact and versatile multi-purpose 2-way active loudspeaker system in the series. Capable of an astonishing maximum peak SPL of 134dB, the DSR112 is a perfect match to
PART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER
9-47; Rev ; 9/9 EVALUATION KIT AVAILABLE General Description The / differential line receivers offer unparalleled high-speed performance. Utilizing a threeop-amp instrumentation amplifier architecture,
Isolated, Unregulated DC/DC CONVERTERS
PWS75A PWS76A Isolated, Unregulated DC/DC CONVERTERS FEATURES ISOLATED ±7 TO ±8VDC OUTPUT FROM SINGLE 7 TO 8VDC SUPPLY ±ma OUTPUT AT RATED VOLTAGE ACCURACY HIGH ISOLATION VOLTAGE PWS75A, Vrms PWS76A, 35Vrms
LM828 Switched Capacitor Voltage Converter
LM828 Switched Capacitor Voltage Converter General Description The LM828 CMOS charge-pump voltage converter inverts a positive voltage in the range of +1.8V to +5.5V to the corresponding negative voltage
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA Without External Pass Transistors. Description.
SEMICONDUCTOR CA73, CA73C April 199 Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA Without External Pass Transistors Features Up to 1mA Output Current Positive and Negative Voltage
IS1U60 IS1U60L Recommended operating conditions. Unit
IS1U6/IS1U6L IS1U6/IS1U6L Sensors with 1-Package Design of Remote Control Detecting Functions owing to OPIC Features Outline Dimensions (Unit : mm) 1. 1-package design owing to adoption of OPIC 2. Compact
CPCO Series (160mm) DC-AC Current Probe, Clamp On ±4000A, ±8000A, ±12000A,
The CPCO Series (160mm) Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of ±4000A ±8000A, ±12000A with an accuracy of +/-1% and non-linearity of
SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier
PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating
Series 291 Optical Encoder
Electrocomponents Series 9 Optical Encoder Data Sheet Precision, Long-life Compact mm Size Optical Encoder Features Package Size ( X X 7 mm) Million life cycles (No detent) Million life cycles (With detent)
Standard InGaAs Photodiodes IG17-Series
Description The IG17-series is a panchromatic PIN photodiode with a nominal wavelength cut-off at 1.7 µm. This series has been designed for demanding spectroscopic and radiometric applications. It offers
Extended InGaAs Photodiodes IG22-Series
Description The IG22-series is a panchromatic PIN photodiode with a nominal wavelength cut-off at 2.2 µm. This series has been designed for demanding spectroscopic and radiometric applications. It offers
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
KM4110/KM mA, Low Cost, +2.7V & +5V, 75MHz Rail-to-Rail Amplifiers
+ + www.fairchildsemi.com KM411/KM41.5mA, Low Cost, +.7V & +5V, 75MHz Rail-to-Rail Amplifiers Features 55µA supply current 75MHz bandwidth Power down to I s = 33µA (KM41) Fully specified at +.7V and +5V
GP1U26X/GP1U27X Series GP1U28X/GP1U28Y Series
GP1U26X/GP1U27X Series GP1U28X/GP1U28Y Series Features 1. Compact (case volume) (GP1U28Y : About 1/4 compared with GP1U58Y) 2. Height from PWB to detector face same as GP1U58Y 3. Power filter capacitor
OSC SYNCHRO/RESOLVER/INDUCTOSYN REFERENCE OSCILLATOR
SYNCHRO/RESOLVER/INDUCTOSYN REFERENCE OSCILLATOR FEATURES Make sure the next Card you purchase has... Quadrature Reference Output Voltages for Inductosyn Applications Programmable Output Frequency from
LMV331 Single / LMV393 Dual / LMV339 Quad General Purpose, Low Voltage, Tiny Pack Comparators
General Purpose, Low Voltage, Tiny Pack Comparators General Description The LMV393 and LMV339 are low voltage (2.7-5V) versions of the dual and quad comparators, LM393/339, which are specified at 5-30V.
Rail Current Measurement IC
Rail Current Measurement IC FP130A General Description The FP130A is a wide common mode range high side rail current measurement IC. It is suitable for power systems like battery charger or switching power
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
Introduction. Specifications. Features. Controls. Model 103
Index Page # Model 103 2 Introduction 2 Specifications 2 Features 2 Controls 2 Hints and Tips 3 Input Sensitivity (typical) 3 RF Signal Strength Bargraph 3 Frequency Display Resolution 3 Model 104 4 Introduction
Sonic Distance Sensors
Sonic Distance Sensors Introduction - Sound is transmitted through the propagation of pressure in the air. - The speed of sound in the air is normally 331m/sec at 0 o C. - Two of the important characteristics
PB63 PB63A. Dual Power Booster Amplifier PB63
Dual Power Booster Amplifier A FEATURES Wide Supply Range ± V to ±75 V High Output Current Up to 2 A Continuous Programmable Gain High Slew Rate 1 V/µs Typical Programmable Output Current Limit High Power
Revision RCT-433-UTR DATASHEET
Revision 1.1.0 RCT-433-UTR DATASHEET RADIOTRONIX, INC. RCT-433-UTR DATASHEET Radiotronix 905 Messenger Lane Moore, Oklahoma 73160 Phone 405.794.7730 Fax 405.794.7477 www.radiotronix.com 1 Document Control
Reference Diagram IDG-300. Coriolis Sense. Low-Pass Sensor. Coriolis Sense. Demodulator Y-RATE OUT YAGC R LPY C LPy ±10% EEPROM TRIM.
FEATURES Integrated X- and Y-axis gyro on a single chip Factory trimmed full scale range of ±500 /sec Integrated low-pass filters High vibration rejection over a wide frequency range High cross-axis isolation
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
HA-2640, HA Features. 4MHz, High Supply Voltage Operational Amplifiers. Applications. Ordering Information. Pinouts
HA-264, HA-2645 Data Sheet January 3, 26 FN294.5 4MHz, High Supply Voltage Operational Amplifiers HA-264 and HA-2645 are monolithic operational amplifiers which are designed to deliver unprecedented dynamic
Primary side mark 3.0 ± 0.5. Parameter Symbol Ratings Unit IFM ±1 A. PO 200 mw. V iso T opr. T stg - 55 to C. T sol 260 C
PC96 PC96 DC Input Type OPIC Photocoupler with Built-in ON/OFF Delay Circuit Features Outline Dimensions (Unit : mm ) 1. Propagation delay time 2. ±.2 ( t PHL, t PLH : TYP..7ms ) 16 1 1 13 12 11 1 9 2.
LM2664 Switched Capacitor Voltage Converter
Switched Capacitor Voltage Converter General Description The LM2664 CMOS charge-pump voltage converter inverts a positive voltage in the range of +1.8V to +5.5V to the corresponding negative voltage of
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
MIM-5xx5K2 INFRARED RECEIVER MODULE. Description. Features. MIM-5xx5K2 Series Models BLOCK DIAGRAM VS. CGA & Input Demodulator filter.
Description The is miniaturized infrared receivers for remote control and other applications requiring improved ambient light rejection. The separate PIN diode and preamplifier IC are assembled on a single
SL300 Snow Depth Sensor USL300 SNOW DEPTH SENSOR. Revision User Manual
USL300 SNOW DEPTH SENSOR Revision 1.1.2 User Manual 1 Table of Contents 1. Introduction... 3 2. Operation... 3 2.1. Electrostatic Transducer... 4 2.2. SL300 Analog Board... 4 2.3. SL300 Digital Circuit
High Speed FET-INPUT OPERATIONAL AMPLIFIERS
OPA OPA OPA OPA OPA OPA OPA OPA OPA High Speed FET-INPUT OPERATIONAL AMPLIFIERS FEATURES FET INPUT: I B = 5pA max WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs LOW NOISE: nv/ Hz (khz) LOW DISTORTION:.% HIGH
Phase-locked loop PIN CONFIGURATIONS
NE/SE DESCRIPTION The NE/SE is a versatile, high guaranteed frequency phase-locked loop designed for operation up to 0MHz. As shown in the Block Diagram, the NE/SE consists of a VCO, limiter, phase comparator,
LMC660 CMOS Quad Operational Amplifier
CMOS Quad Operational Amplifier General Description The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It operates from +5V to +15.5V and features rail-to-rail output
CD4541BC Programmable Timer
CD4541BC Programmable Timer General Description The CD4541BC Programmable Timer is designed with a 16-stage binary counter, an integrated oscillator for use with an external capacitor and two resistors,
ICS Ultra-low Current, Low-Noise Microphone with Analog Output
Ultra-low Current, Low-Noise Microphone with Analog Output GENERAL DESCRIPTION The ICS-40310* is a high-performance MEMS microphone with a combination of very low power consumption, high SNR, and a tiny
PIN CONFIGURATION FEATURES ORDERING INFORMATION EQUIVALENT CIRCUIT. D,F, N Packages
DESCRIPTION The µa723/µa723c is a monolithic precision voltage regulator capable of operation in positive or negative supplies as a series, shunt, switching, or floating regulator. The 723 contains a temperature-compensated
SPM0408LE5H-TB. Amplified Zero-Height SiSonic TM Microphone With Enhanced RF Protection. The SPM0408LE5H-TB is a miniature, highperformance,
SPM0408LE5H-TB Amplified Zero-Height SiSonic TM Microphone With Enhanced RF Protection The SPM0408LE5H-TB is a miniature, highperformance, low power, bottom port silicon microphone. Using Knowles proven
LF411 Low Offset, Low Drift JFET Input Operational Amplifier
Low Offset, Low Drift JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed input
ESB Series Embedded EMC Filter Up to 40W converter
Features High Ffficiency up to 91% 2:1 / 4:1 Ultra-Wide input range Compact size 1.6 x 1.0 x 0.4 & 1.6 x 1.0 x 0.5 Standard DOSA pin out; Fully replaceable with 2 x1 standard case Metal Case Six-Sided
Installation and Operating Manual
GB Analog Weight Transmitter PS-1000 Installation and Operating Manual LIST OF CONTENTS Section 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5 Section
SPU0414HR5H-SB. Amplified SiSonic TM Microphone. The SPU0414HR5H-SB is a miniature, highperformance,
SPU0414HR5H-SB Amplified SiSonic TM Microphone The SPU0414HR5H-SB is a miniature, highperformance, low power, top port silicon microphone. Using Knowles proven high performance SiSonic TM MEMS technology,
RC4136 General Performance Quad 741 Operational Amplifier
RC General Performance Quad 7 Operational Amplifier www.fairchildsemi.com Features Unity gain bandwidth MHz Short circuit protection No frequency compensation required No latch-up Large common mode and
Technical Data Sheet Infrared Remote-control Receiver Module
Technical Data Sheet Infrared Remote-control Receiver Module Features : Photo detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against electrical field disturbance
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed
LM6161/LM6261/LM6361 High Speed Operational Amplifier
LM6161/LM6261/LM6361 High Speed Operational Amplifier General Description The LM6161 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300 V/µs and 50 MHz unity gain
PowerAmp Design. PowerAmp Design PAD183 COMPACT HIGH VOLTAGE OP AMP
PowerAmp Design Rev B KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 350 VOLTS HIGH OUTPUT CURRENT 1.5A 35 WATT DISSIPATION CAPABILITY 100kHz POWER BANDWIDTH 330Vp-p 100V/µS SLEW RATE APPLICATIONS
LMV721/LMV722 10MHz, Low Noise, Low Voltage, and Low Power Operational Amplifier
10MHz, Low Noise, Low Voltage, and Low Power Operational Amplifier General Description The LMV721 (Single) and LMV722 (Dual) are low noise, low voltage, and low power op amps, that can be designed into
RC4136. General Performance Quad 741 Operational Amplifier. Features. Description. Block Diagram. Pin Assignments.
RC General Performance Quad 7 Operational Amplifier www.fairchildsemi.com Features Unity gain bandwidth MHz Short circuit protection No frequency compensation required No latch-up Large common mode and
Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This
MEF1 Series Isolated 1W Regulated Single Output DC/DC Converters
www.murata-ps.com MEF1 Series FEATURES UL695 recognised Short circuit protection Operation to zero load Output regulation
FLOW SWITCH 600 Series Velocity Flow Sensor. Instruction Manual
SWITCH 600 Series Velocity Flow Sensor Instruction Manual Ultrasonic Velocity Sensor using Doppler Technology Model: FS-600 Manual Release Date: November, 2009 ECHO Process Instrumentation, Inc. CONTENTS
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Amplified Mini SiSonic Microphone Specification With Enhanced RF Protection Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Amplified
Maintenance/ Discontinued
AN Dual Operational Amplifier Overview The AN is a dual operational Amplifier with a phase compensation circuit built-in. It is suitable for application to various electronic circuits such as active filters
Ultra-Low Bias Current Difet OPERATIONAL AMPLIFIER
OPA9 Ultra-Low Bias Current Difet OPERATIONAL AMPLIFIER FEATURES ULTRA-LOW BIAS CURRENT: fa max LOW OFFSET: mv max LOW DRIFT: µv/ C max HIGH OPEN-LOOP GAIN: 9dB min LOW NOISE: nv/ Hz at khz PLASTIC DIP
ClampOn, Inc. Ultrasonic Intelligent Sensors. Presented by Hans A. Wagner
ClampOn, Inc. Ultrasonic Intelligent Sensors Presented by Hans A. Wagner Bergen, Norway Locations Project Management Engineering and Manufacturing Research and Development Sales and Service for Eastern
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
HA11560T. VCR/VDP RF Modulator
VCR/VDP RF Modulator ADE-207-126A (Z) Rev. 1 Dec. 1993 This chip is designed for ap p l i c ation as an RF m o d u l ator in VCRs and VDPs. A new type RF o s c i l l ator provides superior harm o n i c
Ultrasonic Sensors. Special-Sensors for. Automation. Level control Distance measurement Monitoring of all materials Waterproof Teach-in function
Special-Sensors for Automation Ultrasonic Sensors Level control Distance measurement Monitoring of all materials Waterproof Teach-in function ISO 900 certified Application notes Basics Ultrasonic sensors
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 2V/µs WIDE GAIN-BANDWIDTH: 2MHz UNITY-GAIN STABLE WIDE SUPPLY RANGE: V S = ±4.
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V max Offset Voltage V/ C max Offset Voltage Drift 5 pa max Input Bias Current.2 pa/ C typical I B Drift Low Noise.5 V p-p typical Noise,. Hz to Hz Low Power 6 A max Supply
FHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers
FHP335, FHP345 Triple and Quad Voltage Feedback Amplifiers Features.dB gain flatness to 3MHz.7%/.3 differential gain/phase error 2MHz full power -3dB bandwidth at G = 2,V/μs slew rate ±55mA output current
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DXR12
Overview The DXR12 is an extremely high-power loudspeaker that is capable of producing a maximum SPL of 132dB with its impressive 1100W of power. It is the perfect solution for live sound applications
LMC6772 Dual Micropower Rail-To-Rail Input CMOS Comparator with Open Drain Output
LMC6772 Dual Micropower Rail-To-Rail Input CMOS Comparator with Open Drain Output General Description The LMC6772 is an ultra low power dual comparator with a maximum 10 ma comparator power supply current