Wireless LAN + Bluetooth Module. IEEE802.11a/b/g/n + Bluetooth 3.0 WYSAAVDXB

Transcription

1 Wireless LAN + Bluetooth Module IEEE802.11a/b/g/n + Bluetooth 3.0 Data Report The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by is under license. 1/25

2 ATTENTION: This module requires device drivers that are under Japan export control. Depending on the customer s country and application (e.g. weapons), may not be able to provide these drivers to all customers. Please contact your local TAIYO YUDEN CO., LTD. sales office for additional information. To contact your local sales office and for additional product information, please visit 2/25

3 Document constituent list Document Page General Items HD-AG-A /3-3/3 Absolute maximum ratings HD-AM-A /1 Electrical characteristics HD-AE-A /8-8/8 Circuit schematic HD-MC-A /1 Outline / Appearance HD-AD-A /2-2/2 Pin Layout HD-BA-A /1 Packaging Specification HD-BB-A /2-2/2 Antenna Application Note /4 ~ 4/4 Rev. records 29-Oct > Ver.1.0 Released 12-Sep-2017> Ver1.1 Update 3/25

4 HD-AG-A (1/3) General Items 1. Scope This specification ( Specification ) applies to the hybrid IC for use Wireless LAN and Bluetooth module ( Product ) manufacture by ( TAIYO YUDEN ) 2. Description 1 User Code: Type : 2 Chip:Marvell 88W Function:Radio frequency transceiver Module. (IEEE802.11a/b/g/n and Bluetooth 3.0 standard conformity) 4 Application:PC peripheral, Handy terminal 5 Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor Regarding the containment of hazardous substance in this Product, it conforms to RoHS Directive. Ability of lead free mounting at customer's assembly (Heat resistance of this Product): Yes 6 Outline: FPC Connector Type JST Mfg. Co., Ltd.: 20FZA-SM1-GAN-TB (HF) 7 Marking: Part Number, MAC Address, Lot number,manufacture and Japan Radio Law ID on Label. 8 Features: -IEEE802.11a/b/g/n and Bluetooth 3.0 standard conformity -Interface: SDIO, PCM -Embedded MPU for reducing loads on host processor -Built-in EEPROM (MAC address) 9. Security: WEP (64/128), TKIP, AES, WPA, WPA2, WAPI 10. Mount: with M1 screw 11. Notes: Instruction (CAUTION) i) Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. 4/25

5 HD-AG-A (2/3) General Items ii) The products listed in this specification are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC). Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment, highly public information network equipment including, without limitation, telephone exchange, and base station). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment, nuclear control equipment, undersea equipment, military equipment). When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this specification for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. iii) Please note that TAIYO YUDEN shall have no responsibility for any controversies or disputes that may occur in connection with a third party s intellectual property rights and other related rights arising from use of our products. TAIYO YUDEN grants no license for such rights. iv) Please note that TAIYO YUDEN shall not be liable for any defect and/or malfunction arising from use of the product under the terms and conditions other than the operating conditions hereof. In addition when this product is used under environmental conditions such as over voltage, it may be destroyed in short mode. To ensure the security of customer s product, please add an extra fuse or/and a protection circuit for over voltage. v) In some cases, TAIYO YUDEN may use replacements as component parts of products. Such replacement shall apply only to component part of products, which TAIYO YUDEN deems it possible to replace or substitute according to (i) scope of warranty provided in this specification (e.g. electric characteristics, outline, dimension, conditions of use, reliability tests, official standard (type approvals etc.)) vi) This Product is not designed to be radiation-resistant. Please do not expose Product to radiation. vii) Communication between this product and other might not be established nor maintained depending upon radio environment or operating condition of this product and other products with wireless technology. 5/25

6 HD-AG-A (3/3) General Items viii) This product operates in the unlicensed ISM band at 2.4GHz/5GHz. In case this product is used around the other wireless devices which operate in same frequency band of this product, there is a possibility that interference occurs between this product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this product before using this product or do not use this product around the other wireless devices. ix) Do not alter hardware and/or software of this Product. Please note that TAIYO YUDEN shall not be liable for any problem if it is caused by customer's alteration of Hardware without Taiyo Yuden's prior approvals. x) TAIYO YUDEN does not guarantee functions and performances which depend on the customer's firmware.taiyo YUDEN does not assume liabilities for defects and failures (i) in functions, performances and quality of the Customer's product incorporating the Products and (ii) which may occur as the Product is incorporated in the Customer's product xi) Caution for Export Some of our products listed in this specification may require specific procedures for export according to U.S. Export Administration Regulations, Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. xii) Japan Regulatory Information This module is approved with the specific antenna on this module. Please ensure that your product shall bear a label with the following information. If the product is so small that it is not practicable to place the label, please place it in the instruction manual and package. The mark diameter shall be equal or grater than 3 mm. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. : 001-A /25

7 HD-AM-A (1/1) Absolute maximum ratings Absolute maximum ratings Item Symbol Rating Min. Typ. Max. Unit Supply voltage 1 VDD V Supply voltage 2 VIO V Remark Recommendation operating range Item Symbol Rating Min. Typ. Max. Unit Supply voltage 1 VDD V Supply voltage 2 VIO 1.7/ / /3.63 V Storage temperature range Tstg Degrees C Operating temperature range (Shielding case surface temperature) Topr Degrees C Remark 7/25

8 HD-AE-A (1/8) Electrical characteristics DC Specifications Peak Current / Power consumption (IEEE802.11a/b/g/n) The Specification applies for Topr.= 25 degrees C, Supply voltage=typical voltage (3.3V). RF output power = Typ. No. Parameter Condition Symbol Min Typ Max Unit 1 Normal supply voltage 1 VDD V 2 Normal supply voltage 2 VIO 1.7/ / /3.63 V 3 Input Low Voltage VIL x VIO V 4 Input High Voltage VIH 0.8 x VIO VIO V 5 Output Low Voltage VOL V 6 Output High voltage VOH VIO V 7 Peak current 1 VDD3.3 Iccp1 400 ma 8 Peak current 2 VIO Iccp2 30 ma 9 Power consumption1 Burst Tx (2G, 11n/ 150Mbps) Pc1 270 mw 10 Power consumption2 Continuous Rx (2G, 11n/ 150Mbps) Pc2 325 mw 11 Power consumption3 Burst Tx (2G, 11n/ 72.2Mbps) Pc3 280 mw 12 Power consumption4 Continuous Rx (2G, 11n/ 72.2Mbps) Pc4 305 mw 13 Power consumption5 Burst Tx (11g/ 54Mbps) Pc5 340 mw 14 Power consumption6 Continuous Rx (11g/ 54Mbps) Pc6 300 mw 15 Power consumption7 Burst Tx (11b/ 11Mbps) Pc7 475 mw 16 Power consumption8 Continuous Rx (11b/ 11Mbps) Pc8 295 mw 17 Power consumption9 Burst Tx (5G, 11n/ 150Mbps) Pc9 300 mw 18 Power consumption10 Continuous Rx (5G, 11n/ 150Mbps) Pc mw 19 Power consumption11 Burst Tx (5G, 11n/ 72.2Mbps) Pc mw 20 Power consumption12 Continuous Rx (5G, 11n/ 72.2Mbps) Pc mw 21 Power consumption13 Burst Tx (11a/ 54Mbps) Pc mw 22 Power consumption14 Continuous Rx (11a/ 54Mbps) Pc mw Power save mode 23 Power consumption15 (DTIM=1, Beacon interval =100ms) VIO=3.3V Pc mw 24 Power consumption16 Deep Sleep VIO=3.3V Pc mw 8/25

9 HD-AE-A (2/8) Electrical characteristics AC Specifications The Specification applies for Topr=25 degrees C, Supply voltage=typical voltage (3.3V) Parameter Conditio n Symbol Min Typ Max Unit Remark 1 Time from VDD3.3 ramp up to VIO ramp up t1 0 ms 2 PDN asserting time from VIO ramp up t ms Notes1, 2 3 PDN high to SDIO accessible t3 10 ms Note1 4 Time from VIO ramp up to VDD3.3 ramp up t4 0 ms 5 PDN asserting time from VDD3.3 ramp up t ms Notes1, 2 6 PDN high to SDIO accessible t6 10 ms Note1 7 PDN down to VIO fall t7 0 ms 8 VIO fall to VDD3.3 fall t8 0 ms 9 PDN down to VDD3.3 fall t9 0 ms 10 VDD3.3 fall to VIO fall t10 0 ms Notes: 1. PDN is pulled down to GND internally. 2. PDN must remain asserted for minimum of t2/t5 after VDD3.3 and VIO are stable. Power up sequence Power down sequence External power down (PDn) Parameter Conditio n Symbol Min Typ Max Unit Remark 1 PDn pulse width Tppw 300 ms Notes1, 2 1. PDn should be asserted while VDD3.3 and VIO are stable. 2. For lowest current consumption, apply all power rails to during the assertion of PDn pin. 9/25

10 HD-AE-A (3/8) Electrical characteristics SDIO Interface Specifications The Specification applies for Topr.= 25degrees C, Supply voltage=typical voltage (3.3V). Parameter Symbol Condition Min Typ Max Unit Remark 1 Input SDIO_CLK Frequency Tf 2 Input SDIO_CLK High Time Tch 3 Input SDIO_CLK Low Time Tcl 4 Input SDIO_CMD, DATA[3:0] Setup time Tsu 5 Input SDIO_CMD, DATA[3:0] Hold time Thd Normal 0-25 High Speed 0-50 Normal High Speed Normal High Speed Normal High Speed Normal High Speed Output SDIO_CMD, DATA[3:0] Delay time Tod ns 7 Output SDIO_CMD, DATA[3:0] Hold time Toh High Speed ns Normal Mode MHz ns ns ns ns High Speed Mode 10/25

11 HD-AE-A (4/8) Electrical characteristics PCM Interface Specifications The Specification applies for Topr.= 25degrees C, Supply voltage=typical voltage (3.3V). Parameter Conditio n Symbol Min Typ Max Unit Remark 1 PCM_CLK Frequency Tbclk MHz 2 PCM_CLK Duty Cycle PCM_CLK Rise Time ns 4 PCM_CLK Fall Time ns 5 Delay time from PCM_CLK High to valid PCM_OUT Tdo ns 6 Setup Time for PCM_DIN valid to PCM_CLK Low Tdisu ns 7 Hold time for PCM_CLK Low to PCM_DIN valid Tdiho ns 8 Delay time from PCM_CLK High to PCM_SYNC High Tbf 15 ms Master Mode 11/25

12 HD-AE-A (5/8) Electrical characteristics RF Specifications (WLAN 11n/150Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No. Parameter Condition Symbol Min Typ Max Unit Remark 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm RF Specifications (WLAN 11n/72.2Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No. Parameter Condition Symbol Min Typ Max Unit Remark 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm 12/25

13 HD-AE-A (6/8) Electrical characteristics RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No. Parameter Condition Symbol Min Typ Max Unit Remark 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=typical voltage (3.3V). No Parameter Condition Symbol Min Typ Max Unit Remark. 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc Power up TU - 2 us 4 Power up-down rump Power down TD - 2 us 5 Frequency tolerance Ft ppm 6 EVM Peak EVM - 35 % 7 Rx sensitivity PER<8% SEN dbm 8 Maximum Input Level PER<8% MIL -10 dbm 13/25

14 HD-AE-A (7/8) Electrical characteristics RF Specifications (WLAN 11a/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No Parameter Condition Symbol Min Typ Max Unit Remark. 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm RF Specifications (WLAN 11a/150Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No Parameter Condition Symbol Min Typ Max Unit Remark. 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm 14/25

15 HD-AE-A (8/8) Electrical characteristics RF Specifications (WLAN 11a/72.2Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage (3.3V). No Parameter Condition Symbol Min Typ Max Unit Remark. 1 RF frequency range FREQ MHz 2 TX Power Po dbm 1 st Side Lobe M dbc 3 Spectrum Mask 2 nd Side Lobe M dbc 3 rd Side Lobe M dbc 4 Symbol clock tolerance Ft ppm 5 Frequency tolerance Ft ppm 6 EVM Rms EVM db 7 Rx sensitivity PER<10% SEN dbm 8 Maximum Input Level PER<10% MIL dbm RF Specifications (Bluetooth ) The Specification applies for Ta=25 degrees C, Supply voltage=typical voltage (3.3V). No. Parameter Condition Sym Min Typ Max Unit Remark 1 Frequency Range FREQ MHz 2 Initial Carrier Frequency Tolerance Packet : DH5 IFT khz 3 Tx Power PO dbm 4 Modulation Payload : MC Characteristics Payload : MC khz Basic SENB Sensitivity 2-DH5 SENE dbm 3-DH5 SENE BER < 0.1% BER < 0.01% BER < 0.01% 15/25

16 HD-MC-A (1/1) Circuit Schematic Block Diagram Antenna Diplexer SW 2.4GHz PA LNA 5GHz PA TX BT RX TX Dual Band 11abgn+BT 88W8787 DCDC 1.8V EEPROM Connector VDD3.3V VIO SDIO (6) PCM (4) PDn SW LNA RX Crystal GND 16/25

17 HD-AD-A (1/2) Outline/Appearance Unit: mm, Tolerances unless otherwise specified: ±0.2mm 22.8± ±0.1 Φ1.4± ±0.1 Shielding Case 2.4± Φ1.6± Max. 1.3Max. 2.45Max. Indication Label 17/25

18 HD-AD-A (2/2) Outline/Appearance Indication label description. Unit: mm,tolerances unless otherwise specified:±0.5mm Indication label description 1) MODEL : 2) MAC address number : XXXXXXXXXXXX 3) Japan logo mark : Specified logo mark 4) Japan ID : 001-A ) Manufacture : 6) Product Lot number : Four digits 18/25

19 HD-BA-A (1/1) Pin Layout Pin Descriptions Top view 1 20 Terminal No. Terminal Name Input/ Output Pwr Domain Description Function 1 GND - GND Power 2 PCM_DIN Input VIO PCM Data Input Signal. PCM 3 PCM_DOUT Output VIO PCM Data Output Signal. PCM 4 PCM_SYNC Input/Output VIO PCM Sync Pulse Signal. Master: Output, Slave: Input 5 GND - GND Power 6 PCM_CLK Input/Output VIO PCM Clock Signal. Master: Output, Slave: Input 7 GND - GND Ground Power 8 VDD3.3 Input VBAT 3.3V Power Supply Power 9 VDD3.3 Input VBAT 3.3V Power Supply Power 10 VIO Input VIO 1.8V/3.3V Digital I/O Power Supply Power 11 SD_CMD Input/Output VIO SDIO Command SDIO 12 SD_DATA0 Input/Output VIO SDIO Data-0 SDIO 13 SD_DATA1 Input/Output VIO SDIO Data-1 SDIO 14 GND - GND Ground Power 15 SD_CLK Input VIO SDIO Clock SDIO 16 GND - GND Ground Power 17 SD_DATA2 Input/Output VIO SDIO data-2 SDIO 18 SD_DATA3 Input/Output VIO SDIO data-3 SDIO 19 PDn Input VIO Power Down (active low) with internal pull-down. PCM PCM System 20 GND - GND Power 19/25

20 HD-BB-A (1/2) (1) Packaging Material Packaging Specification Name Outline Materials Note Tray 200x190x12.2mm Conductive PS Tape W12mm Paper Corrugated cardboard Box(inner) 246x206x94mm Corrugated cardboard Box(Outer) 412x 262 x235mm (2) Packaging Unit Max 800 pcs/outer Box (200 pcs/inner Box, 20 pcs/tray) (3) Packaging Figure Tray 20/25

21 HD-BB-A (2/2) Packaging Specification Inner Box Tray(for cap) Tape Tray(10max) Corrugated cardboard box(inner) Label Outer Box Tape Corrugated cardboard box(inner) Tape Corrugated cardboard box(outer) Corrugated cardboard box(outer) Label Label 21/25

22 (1/4) Antenna Application Note 22/25

23 (2/4) Antenna Application Note 23/25

24 (3/4) Antenna Application Note 4. Directional characteristics example 2.4GHz Band 24/25

25 (4/4) Antenna Application Note 5GHz Band 25/25