DISCONTINUED PH5502B2NA1-E4. Preliminary. Data Sheet. Ambient Illuminance Sensor DESCRIPTION FEATURES APPLICATIONS. R08DS0038EJ0100 Rev.1.

Transcription

1 PH5502B2NA-E4 Ambient Illuminance Sensor DESCRIPTION Preliminary Data Sheet The PH5502B2NA-E4 is an ambient illuminance sensor with a photo diode and current amplifier. This product has spectral characteristics close to human eye sensitivity and outputs light current proportional to the ambient brightness. The PH5502B2NA-E4 can be used to improve the performance and reduce the power consumption of digital equipment such as FPD-TV sets and mobile phones, by enabling automatic brightness control and automatic switching on and off of lighting systems. FEATURES Small and thin SON package 2.55 x.56 x 5 mm Spectral characteristics close to human eye sensitivity Peak sensitivity wavelength 555 nm TYP. Output characteristics proportional to illuminance Large output light current 230 µa TYP.@00 lx (Fluorescent light) Low voltage operation V CC =.8 to 5.5 V Pb-free APPLICATIONS FPD TV sets, displays Mobile phones, smartphones Notebook PCs, tablet PCs DSCs, DVCs FA equipment Lighting systems, etc. A Business Partner of Renesas Electronics Corporation. R08DS0038EJ000 Rev..00 R08DS0038EJ000 Rev..00 Page of 0

2 PH5502B2NA-E4 PACKAGE DIMENSIONS (UNIT: mm) Pin No. OUT 2 GND 3 V CC 4 NC.56± Terminal 5 2 (5) 3 TOP VIEW 2.55± 2.25 SIDE VIEW BOTTOM VIEW Remark Pin is distinguishable by the shape of the lead frame. Remark ( ) indicates nominal dimensions. 5 NC 6 NC Remark. Connect all the NC terminals to GND or V CC. 2. The bypass capacitor between V CC and GND is to be mounted within 20 mm of the package body. 4 R08DS0038EJ000 Rev..00 Page 2 of 0

3 PH5502B2NA-E4 BLOCK DIAGRAM VCC MARKING EXAMPLE Light Source Product code GND (Bottom View) A 2 Assembly code pin OUT R08DS0038EJ000 Rev..00 Page 3 of 0

4 PH5502B2NA-E4 ABSOLUTE MAXIMUM RATINGS (T A = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit Supply Voltage VCC 6 V Light Current IO 5 ma Power Dissipation * P D 35 mw Operating Temperature T opt 30 to +85 C Storage Temperature T stg 40 to +00 C Note: *. Mounted on glass epoxy board (8 mm 3 mm t 0.8 mm) RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Supply Voltage VCC V ELECTRO-OPTICAL CHARACTERISTICS (T A = 25 C, V CC = 3.0 V, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Supply Current * I CC E V = 00 lx *2 260 µa Peak Sensitivity Wavelength λ p 555 nm Light Current * I O0 E V = 0 lx 0. µa I O E V = 0 lx *2 23 µa I O2 E V = 00 lx *3 330 µa I O3 E V = 00 lx * µa Saturation Output Voltage *4 V O E V = 00 lx, R L = 50 kω * V Switching Rise Time t r R L = 5 kω *6 200 µs Time *5 Fall Time t f 250 µs Note: Delay Time t d 400 µs Storage Time t s 0 µs * Measured under load resistance conditions of an output current unsaturated *2 Fluorescent light *3 Incandescent light *4 Saturation output voltage measurement method: Light Source VCC PH5502B GND OUT RL VCC VCC VO Illuminance (lx) R08DS0038EJ000 Rev..00 Page 4 of 0

5 PH5502B2NA-E4 *5 Switching Time Pulse input VCC VCC Input Output *6 White LED td PH5502B GND ts tr tf OUT RL 90% 0% R08DS0038EJ000 Rev..00 Page 5 of 0

6 PH5502B2NA-E4 TYPICAL CHARACTERISTICS (T A = 25 C, V CC = 3.0 V, unless otherwise specified) Ratio Ratio SPECTRAL SENSITIVITY CHARACTERISTICS Wavelength (nm) pin Angle (deg.) Fluorescent light Incandescent light Halogen light Krypton light White LED DIRECTIONAL CHARACTERISTICS DIRECTIONAL CHARACTERISTICS 2 Ratio Ratio pin Remark The graphs indicate nominal characteristics. LIGHT SOURCE SENSITIVITY VARIATION Angle (deg.) 2 R08DS0038EJ000 Rev..00 Page 6 of 0

7 PH5502B2NA-E IO (μa) Ratio LIGHT CURRENT VS. ILLUMINANCE Load between Out-GND a: No load b: kω 0. c: 0 kω Illuminance (lx) a b TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 00 lx (NORMALIZED AT 25 C) Temperature ( C) Remark The graphs indicate nominal characteristics. c IO (μa) Ratio VCC DEPENDENCY OF LIGHT CURRENT AT 00 lx (NORMALIZED AT VCC = 3 V) TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 0 lx Temperature ( C) VCC (V) R08DS0038EJ000 Rev..00 Page 7 of 0

8 PH5502B2NA-E4 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 4.0±0. Tape Direction Outline and Dimensions (Reel) φ Product Pin θ Symbol A B W 2.0±0. 4.0±0. φ.05±0.05 Direction of feed C Dimensions (mm) φ φ Perforation 0 D.5 E 0.78±0.05 θ 2 Product Cover tape Symbol C D E θ 3.5± ±0. 8.0± 2.9 B 0.78±0.05 Carrier tape A W Dimensions (mm) φ 3± 2.0± 2.0± ±0.05 θ 2 20 R08DS0038EJ000 Rev..00 Page 8 of 0

9 PH5502B2NA-E4 RECOMMENDED MOUNT PAD DIMENSIONS (Unit: mm) Remark All dimensions in this figure must be evaluated before use. 2 2 R08DS0038EJ000 Rev..00 Page 9 of 0

10 PH5502B2NA-E4 NOTES ON HANDLING. Recommended reflow soldering conditions (including infrared reflow, convection reflow, and infrared + convection reflow) () This product is dry-packed with desiccant in order to avoid moisture absorption. (2) After breaking the seal, reflow soldering must be done within 68 hours under the recommended temperature profile shown below. (3) If more than 68 hours have passed after breaking the seal, the baking process must be done by using a tape and reel. Baking conditions: Once, with tape and reel, 60±5 C, 0 to 24 hours After the baking process, this product must be stored under conditions of 30 C or below, 70% RH or below, and reflow soldering must be done within 68 hours. <Storage conditions after breaking seal> S torage conditions : 30 C or below, 70% RH or below Maximum storage period after breaking seal : 68 hours (Second reflow soldering must be completed within 68 hours.) <Reflow soldering conditions> P eak reflow temperature : 260 C or below (Package surface temperature) Maximum number of reflows : 2 No repair by hand soldering Maximum chlorine content of rosin flux (percentage mass) : % or less Package Surface Temperature Ramp-up rate 3 C/s MAX. 50 C Recommended Temperature Profile of Reflow 60 to 20 s 200 C Time 8 min. MAX. 220 C 255 C Peak Temperature 260 C MAX. 30 s or less 60 s or less Ramp-down rate 6 C/s MAX. R08DS0038EJ000 Rev..00 Page 0 of 0

11 Revision History PH5502B2NA-E4 Data Sheet Description Rev. Date Page Summary.00 First edition issued All trademarks and registered trademarks are the property of their respective owners. C -

12 Notice. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically "Specific": designed for life support. Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 0. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 2. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note ) (Note 2) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.