PowerPlex Panel Modul PP-M-PM024
|
|
- Prosper Elmer Flynn
- 6 years ago
- Views:
Transcription
1 Description The Plex Panel Module has been designed for DC 12 V and DC 24 V on-board electrical systems of leisure boats and work boats. The module serves for the connection of up to 32 switches, with or without corresponding status indication via signalling LEDs. This allows easy integration of conventional switching panels with the benefits of a smart power distribution, control and monitoring. The patented Four Level Protection Concept (FLPC) offers redundant overload protection. In addition the E-T-A circuit breakers integrated in the Panel Modules allow manual activation of the 8 A outputs. Plex is a decentralised power distribution and control system. All Plex modules ensure reliable control and monitoring of the electrical installations on board, either alone or in combination with other Plex components. Besides the protection against overcurrent they allow readout of data of the connected level sensors and temperature sensors as well as of shunts. All modules of a system communicate and interact via an SAE- J1939-compliant CAN bus. Plex is configured by using the Plex Configuration Software and the configuration is transferred to the modules by means of USB/CAN converters. Typical applications l watercraft, e. g. recreational, boats and work boats l special vehicles Features and Benefits l well-proven CAN technology l redundant protection - Four Level Protection Concept (FLPC) l programmable overload protection l simple configuration l Windows based configuration software l integral diagnostic and monitoring functions l wire break detection l inputs for analogue sensors l dimming function (8 A outputs) l 32 digital inputs and 32 signal outputs Order number PP-M-PM Approvals Authority Norm Voltage ratings GL Rules VI, part, GL 2012, category C, H, EMC1 Lloyd s Register Spec No 1, cat. ENV1, ENV2, ENV3 DC 12 V DC 24 V DC 12 V DC 24 V Technical data Voltage rating U N DC 12 V / DC 24 V Operating voltage U B 9 32 V DC Max. total current per module 20 A Degree of Protection IP22 in a vertical mounting position with the main power connectors downwards Operating temperature range C ( F) Storage temperature range C ( F) Humid heat (IEC , Db) 55 C / 95 % RH, 24 hours Vibration sinusoidal (IEC , Fc) Shock (IEC , Ea) EMC Mass Interfaces: CAN according to 2 Hz to 13.2 Hz: ± 1 mm 13.2 Hz to Hz: acceleration 0. g 30 g (11 ms) CE marking to, EN , EN approx g SAE J kBit/s The CAN-terminals at each end of the bus require a termination by a 120 Ω resistor. Inputs 32 inputs for switches or momentary switches digital inputs: Ω: ON; > kω: OFF 4 analogue inputs 0 10 V analogue input: R in : 40 kω; resolution: 10 bit Outputs 2 outputs with 8 A max. continuous current load output: max. current rating: MOSFET, high side switching 8 A adjustable from 1 A to 8 A in 1 A steps dimmable in 10 steps with Hz PWM typical voltage drop U ON at rated current (at 25 C): 60 mv overload tripping range: x I N trip time: adjustable from msec to 6 s current limitation: typically 60 A at DC 24 V leakage current in OFF condition: 4 µa wire breakage monitoring in ON and OFF condition of load: wire breakage tresholds: OFF condition: R Load : typically > 5 kω ON condition: I Load typically < 200 ma additional overload protection by means of one E-T-A circuit breaker type A per output Compliant with IEC Electrical and electronic installations in Ships Electromagnetic compatibility 1
2 Technical data 4 outputs with max. 1 A continuous current load output: MOSFET, high side switching max. current rating: 1 A typical voltage drop U ON at rated current (at 25 C): 0 mv overload tripping range: 4 A trip time: typically 2 ms at 10 A current limitation: typically 10 A at DC 24 V leakage current in OFF condition: 2 µa self-resetting 32 status outputs with integral LED driver, 150 Ω / 5 V Status indications There are two LEDs on the top side of each module indicating module and system status. Name Indication Meaning green flashing frequency refer to manual yellow flashing frequency refer to manual Signal output Configurable Signal Outputs: 32 status indicators (LEDs) can be configured to show the status of the load outputs User Status indication Note: Refer to installation manual for installation and safety instructions Pin selection marking of terminals Status LED load OFF oad ON fault, short circuit/ overcurrent fault, wire break LED off LED on flashing quickly flashing slowly socket for manual override Left side Bottom Top 2 returns (SR) SR SR 32 inputs (S1-S32) S1 S2 S3 S4 S5 S6 S S8 S9 S10 S11 S12 S13 S14 S15 S16 4 analogue inputs with a return each A1 A2 S1 S18 S19 S20 S21 S22 S23 S24 S25 S26 S2 S28 S29 S30 S31 S32 A3 A4 not used GND TX RX parallel CAN bus terminal CL CH CS CL CH CS Right side Bottom Top 2 returns (LR) LR LR 32 signal outputs (L1-L32) L1 L2 L3 L4 L5 L6 L L8 L9 L10 L11 L12 L13 L14 L15 L16 4 load outputs 1 A, with a return each 2 load outputs 8 A, with a return each R 82 8R L1 L18 L19 L20 L21 L22 L23 L24 L25 L26 L2 L28 L29 L30 L31 L for 4 mm 2 screwless terminals for 1.5 mm 2 screwless terminals for 1.5 mm 2 circuit breakers voltage supply (+) pole voltage supply (-) pole 2
3 Dimensions Version 1 Dimensions Version 2 Mounting mounting bracket 1 (included in delivery) Mounting mounting bracket 2 (not included in delivery, see accessories) 11± ± ± ±.004 Ø4.5 Ø The module is designed for wall mounting by means of the fittings provided ± ± ± ±.006 Ø4.5 Ø ± ± ± ±.004 The module is designed for wall mounting by means of the fittings provided Installation drawings Installation drawings Dimensions Dimensions plus-terminal (+) minus-terminal (-) plus terminal (+) minus terminal (-) field for module address max max field for module adress max. 8.5 max mounting bracket strain relief LED LED activity snap-on cover LED LED activity snap-on cover mounting bracket This is a metric design and millimeter dimensions take precedence. Applicable for normal dimensions without direct tolerance indication: DIN ISO 286 ± IT 13. Refer to user manual for installation and safety instructions. This is a metric design and millimeter dimensions take precedence. Applicable for normal dimensions without direct tolerance indication: DIN ISO 286 ± IT 13. Refer to user manual for installation and safety instructions. 3
4 Typical time/current characteristics Overview (without snap-on cover) Programmable delay times available for overload tripping 25 ms*, 50 ms*, ms, 200 ms, 500 ms, 50 ms*, 1 s*, 2 s*, 4 s*, 6 s* * not rececommended U bat = 24 V, T A = 23 C Curve 8 A, delay ms 000 space for module address label screw M3x8 max. tightening torque 80 Ncm L-profile A centre mounting screw nut M8 max. tightening torque 13 Nm load current A A A nut M8 included in delivery Curve 8 A, delay 500 ms A B B Included in delivery: screw M3x8 L-profile load current A Caution: Mounting positions and sequence must be observed 4
5 Circuit Labels Y Y (page 1 of 3) Y (page 2 of 3) trim tabs hood fuel gauge gas tank level display 3 aft salon courtesy lights water tank sewage tank wiper wiper startboard speedometer V.H.F. transceiver V.H.F. DSC monitor wiper centre wiper portside startboard M.O.B. bilge alarm fire alarm pyrogenic system centre portside signal horn klaxon fan fan engine bay fan toilet fan pantry heating bow heating aft heating instruments heating air conditioning refrigerator ice box navigation instruments wind force meter sonar log deep freezer ice maker boiler oven log / sonar sat phone GMDSS fish finder desalination system stereo radio / CD Tv / video / DVD GPS compass radar computer MF radio blue light searchlight top light Navtex weather decoder map plotter UKW radio anchor light three-color-light signal lights emergency flash mobile radio SSB transmitter SSB receiver antenna disabled signal position lights starbord light portside light autopilot gas alarm system gas valve alarm system stern light sidelights deck light main mast deck light mizzen mast motor instruments anchor winch anchor winch control bow thruster cockpit wheel house bow thruster control roller reef system hydraulics centreboard hydraulics compass dimmed instrument pantry winches level sensor level display 1 level display 2 chart table engine bay bow starboard Y (page 3 of 3) portside aft salon courtesy lights toilet wet room ship s hold step lights headlights reading light red light 12 V DC 24 V DC voltage converter DC/DC outlets outlets 12 v DC outlets 24 V DC pumps bilge pump bilge pump bilge pump bilge pump bilge pump drainage pump presswater pump deck wash pump sewage pump sewage pump toilet pump shower pump greywater pump water pump ballast water pump 1 ballast water pump 2 coupling bilge pump wiper water pump
6 Accessories USB/CAN converter: X PP-USBCO X PP-USBC1 (opto-decoupled) Plex Configuration Software Mounting bracket 2: Y Circuit breakers for replacement : A cable length including USB connector approx. 40 mm Connection to CAN bus via D-SUB plug, 9-pin Pin assignment D-SUB output plug PIN 2 assignment CAN-L CAN-H This is a metric design and millimeter dimensions take precedence. Applicable for nominal dimensions without direct tolerance indication: DIN ISO 286 ± IT 13. Refer to product datasheet for installation and safety instructions. All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved. Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 6
PowerPlex Compact Module PP-C-COM24
Description The PowerPlex Compact Module has been designed for the 12 V or 24 V DC-System of special vehicles, buses or boats. It provides inputs for switches and sensors as well as power outputs with
More informationSmart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationSolid State Remote Power Controller E
Solid State Remote Power Controller E-048-60. Description The E-T-A Solid State Remote Power Controller (SSRPC) E-048-60. is an opto decoupled transistorised switching device providing both protection
More informationElectronic Circuit Breaker ESS20-0..
Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode power supply. DC 4 V power supplies,
More informationElectronic Circuit Breaker ESS1 for System SVS1
Electronic Circuit Breaker for System SVS Description The electronic circuit breaker is designed to ensure selective disconnection of individual s in industrial systems which are powered by a DC 24 V switch
More informationElectronic Circuit Breaker ESS1 for System SVS1
Electronic Circuit Breaker for System SVS Description The electronic circuit breaker is designed to ensure selective disconnection of individual s in industrial systems which are powered by a DC 24 V switch
More informationElectronic Circuit Protector ESX10
Electronic Circuit Protector ESX0 Description Electronic circuit protector type ESX0 is designed to ensure selective disconnection of DC 24 V load systems. DC 24 V power supplies, which are widely used
More informationAdjustable Digital Process Instrument MDK480
Description The adjustable Digital Process Instrument MDK480 is designed to measure and display process variables in industrial applications.the instrument is panel mounted with front frame dimensions
More informationDatasheet. Electronic Circuit Protection ESX10-T
Datasheet Electronic Circuit Protection ESX0-T selected in fixed values from 0.5 A...2 A. Failure and status indication are provided by a multicolour LED and an integral short-circuit-proof status output
More informationAnalog Amplifier RA. RE / /12 replaces: RE RE RE RE Technical Data Sheet
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Analog Amplifier RA RE 95 230/03.06 1/12 replaces: RE 95 022 RE 95 023 RE 29 874 RE 29 875 Technical Data
More informationAnalog amplifier RA. RE Edition: Replaces:
Analog amplifier RA RE 950 Edition: 08.05 Replaces: 0.006 For control of simple functions of electrohydraulic components Two power outputs (PWM) and one switching output Each output has a separately adjustable
More informationNMEA Training Overview
NMEA Training Overview NMEA offers 4 classroom installer training courses Basic Marine Electronics Installer (MEI) Basic NMEA 2000 Network Installer Basic Marine Electronics Installer (MEI) Advanced NMEA
More informationREX12 Electronic Circuit Protector
Description The compact and flexible all-in-one solution REX consists of several perfectly matched components. It comprises the EM12-T supply module for the plus and minus potential via a single or double
More informationREX12 Electronic Circuit Protector
Description The compact and flexible all-in-one solution REX consists of several perfectly matched components. It comprises the EM12-T supply module for the plus and minus potential via a single or double
More informationElectronic circuit protector REX12
Description The new electronic overcurrent protection REX12 consists of the supply module EM12-T and the single or double channel electronic circuit protector REX12-T which allows modular side-by-side
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationElectronic circuit breaker ESS30-Sxxx-DC24V
Electronic circuit breaker ESS30-Sxxx-DC2V Description The electronic circuit protector ESS30-S with physical isolation is the globally unique electronic over protection for DC 2 V applications as a low
More informationPHOENIX CONTACT
Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24
More informationElectronic Standard Relay - ESR10 ISO Micro
Electronic Standard Relay - ESR ISO Micro Description The smart power relay ESR Micro (Electronic Standard Relay) is a solid state relay which can replace electro-mechanical relays. The ESR is a plus switching
More informationAIT2000 CLASS B AIS TRANSPONDER
IMPORTANT NOTE The USB cable of the AIT2000 is designed to be used for configuring/programming the unit during installation and not for permanent connection to the boat s Navigation PC. If you intend to
More informationPressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
More informationDSEM640. DSEControl PROGRAMMABLE CONTROLLER FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY
PROGRAMMABLE CONTROLLER FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY OVERVIEW DC SUPPLY 8 V DC to 36 V DC CURRENT CONSUMPTION OPERATING CURRENT < 300 ma at 24 V without external loads TOTAL INPUTS/OUTPUTS
More informationHexa Multi Module 366HMM. Introduction. Design Specifications. Key Features
Hexa Multi Module Introduction The E-Plex 366HMM is a six channel DC power distribution module capable of handling loads of up to 15A per channel or 50A total. The six channels can be utilized as either
More informationQ Panel General Guide
Q Panel General Guide Contents Q Panel General Guide Welcome to Q Experience! Available applications Tech overview Overview Quick Start Applications Elements: Sidebar Sidebar: Modes Elements: Main menu
More informationDigital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version
Electrical temperature measurement Digital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version WIKA data sheet TE 15.01 Applications Process industry Machine building
More informationElectronic Circuit Protector ESX10-T
Electronic Circuit Protector ESX0-T Description Electronic circuit protector type ESX0-T is designed to ensure selective disconnection of systems. power supplies, which are widely used in industry today,
More informationInstallation & Quick Start Guide AIT2000 Class B AIS Transponder
Installation & Quick Start Guide AIT2000 Class B AIS Transponder QUICK START AIT2000 - VR1.01 1. Introduction Congratulations on the purchase of your AIT2000 Class B AIS Transponder. It is recommended
More informationElectronic Circuit Breaker ESS1 for System SVS1
Electronic Circuit Breaker ESS for System SVS Description The electronic circuit breaker ESS is designed to ensure selective disconnection of individual loads in industrial systems which are powered by
More informationSwitched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
More information02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
More informationPHOENIX CONTACT - 09/2009
Electronic miniature circuit-breaker CLIPLINE Data sheet 03906_en_0 PHOENIX CONTACT - 09/2009 Description The EC-E... electronic miniature circuit-breaker selectively protects all 24 V DC load circuits
More informationTECHNICAL DATASHEET #TDAX A DC MOTOR CONTROLLER P/N: AX Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging
TECHNICAL DATASHEET #TDAX102000 35A DC MOTOR CONTROLLER P/N: AX102000 Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging with Electronic Assistant Features: Unidirectional or bi-directional
More informationDigital Input Output Module 24 V for Ex n Zone 2 Series 9472/35
www.stahl.de > 16 channels can be adjusted in pairs as digital inputs or outputs > Suitable for NAMUR proximity switches, 3-wire PNP proximity switches, contacts and solenoid valves (24 V / 0.5 A). > Up
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationRTD Temperature Sensor omnigrad T -TSM 480, TR 480. Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC
Technical Information TI 273T/02/en 60021667 RTD Temperature Sensor omnigrad T -TSM 480, TR 480 Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC Application The Omingrad
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More information02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
More informationPHASED OUT. LED Driver Compact dimming. Driver LCAI 20W 350mA 900mA ECO SR ECO series
Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee Dimming
More informationPHOENIX CONTACT
Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode
More informationCA18CAxxBPxIO - IO-Link
Capacitive Proximity Sensors with IO-Link communication Description The new generation of CA18CA IO sensors are a complete family of high performance capacitive sensors for detection of most solid or liquid
More informationTorque Sensor Series 3000 and Series 4000
Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range
More informationPHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 350mA 550mA ECO lp ECO series
Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 550 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee
More informationLED Driver Linear / area dimming. Udriver LCAI 20W 350mA 550mA ECO lp ECO series
Udriver LCAI 20W 350mA 550mA ECO lp ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 550 ma Max. output power 20 W Nominal
More informationPHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series
EL Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 150 400 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee
More informationNAT Applications. Features
NAT 85 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
More informationPHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO SR ECO series
Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power 55 W Nominal life-time up to 100,000 h 5-year guarantee
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationEclipse. Pipelay Accommodation Work Barge. Large shallow water pipelay barge. 300 T Huisman pedestal crane. Suitable for cable lay
Large shallow water pipelay barge 300 T Huisman pedestal crane Suitable for cable lay Accommodation for 260 Pax Eclipse Pipelay Accommodation Work Barge Technical Drawing Relatively young pipelay barge
More informationECT Applications. Features
ECT 847 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationRudder or propeller angular position transmitter KINAX WT720
Description The is a robust, absolute angular position transmitter, which is particularly suitable for use in marine applications such as the detection of rudder or propeller positions. In contrast to
More informationEFX IO84 Input/Output Module
EFX IO84 Input/Output Module Input/Output expansion module for EFX Controllers CANopen interface Surface electrostatically coated (cathodic immersion) 10...32V DC Technical Data Housing Dimensions (l x
More informationLED Driver Compact dimming
Driver LCAI 35W 350mA 900mA ECO C ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 35 W Nominal
More informationDigital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version
Temperature Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version WIKA data sheet TE 15.01 for further approvals see page 10 Applications
More informationMagnetic Encoder MEM 22
Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationLED Driver Compact dimming
Driver LCAI 35W 3mA 900mA ECO C flat ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 3 900 ma Max. output power 35 W Nominal
More informationEclipse. Pipelay Accommodation Work Barge. Large shallow water pipelay barge. 300 T Huisman pedestal crane. Suitable for cable lay
Large shallow water pipelay barge 300 T Huisman pedestal crane Suitable for cable lay Accommodation for 260 Pax Eclipse Pipelay Accommodation Work Barge Technical Drawing Relatively young pipelay barge
More informationmaxon document number:
maxon document number: 791272-04 1 Table of contents... 2 2 Table of figures... 3 3 Introduction... 4 4 How to use this guide... 4 5 Safety Instructions... 5 6 Performance Data... 6 6.1 Motor data... 6
More informationCAN-IO Custom IO remote module
CAN-IO Custom IO remote module Main characteristics High customization Integrate different types of inputs/ outputs Up to 40 total channels DIN rail mount or plate Main applications Climatic chambers Autoclaves
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationTORKEL 900-series Battery Load Unit
TORKEL 900-series Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Easy
More informationNAT Applications. Features
NAT 85 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
More information02/11/2015
Smart "Compact" range with display CD20 Smart Part number 88974053 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions
More informationTORKEL 900-series Battery Load Unit
Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Quick report Easily
More informationDA 30 High Torque Technical Specification
1/17 DA 30 High Torque DA 30-HT-30-5848 2/17 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Materials and Protective Features... 6 5. Dimensions... 6 5.1. Installation
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
More information02/11/2015
Smart range with Removable Terminal blocks XD26RBT Smart Part number 88974561 Designed for industrial, commercial, medical and paramedical machines Faster maintenance process which improves the machine
More information"Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting
Smart "Compact" range with display CD12 Smart Part number 88974043 "Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting Type Input
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
More informationInstallation & Quick Start Guide CLB2000 Class B AIS Transponder
Installation & Quick Start Guide CLB2000 Class B AIS Transponder QUICK START CLB2000 - VR1.01 1. Introduction Congratulations on the purchase of your CLB2000 Class B AIS Transponder. It is recommended
More informationTECHNICAL DATASHEET #TDAX Universal Input, Single Output Valve Controller CAN (SAE J1939)
Features: TECHNICAL DATASHEET #TDAX021610 Universal Input, Single Output Valve Controller CAN (SAE J1939) 1 universal signal input (voltage, current, resistive, PWM, frequency or digital) 1 output: proportional
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationDTMA-1800-UMTS-12-AISG
DTMA--UMTS-12- Double units for easy use with XXPol antennas Suitable for antenna RET control according to /3GPP standard Bypass mode to ensure cell operation in case of power down Supports 1.1 and 2.0
More informationFunctional data Factory settings Variable Settings
echnical data sheet Rotary actuator RF-MF(-O) Multifunctional rotary actuator with emergency control for and 3 way control ball valve orque Nm Nominal voltage AC/DC V Control: Modulating DC... V or variable
More informationPHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO C ECO series
Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power 55 W Nominal life-time up to 100,000 h 5-year guarantee
More informationSmart-house Dimmer Power dimmer up to 500W Type SH2D500W230
Smart-house Dimmer Power dimmer up to 500W Type SH2D500W230 Universal dimmer switch for R, L, C up to 500W and LED loads Automatic load detection for L, R, C loads Integrated heat sink for temperature
More informationTechnical Data Measuring principle Thick-film-on-ceramic 25 C typ. ± 0.3 % FS typ. (± 0.5 % FS typ., ± 1 % FS typ.)
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic transmitter
More information7.2 DV1311.L08 and DV1311.L12
7. DV.L08 and DV.L 7.. General information The DV.L08 and DV.L modules let you control valve manifolds using multi-pin technology. There are two types of valve control modules available for delivery, which
More informationNOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationREE series digital interpolators
Data sheet L-957-939-0-B REE series digital interpolators The REE digital series of interpolators is designed to accompany the RG ( µm) and RG (0 µm) encoder systems by offering a wide range of interpolation
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationDigital Input Module NAMUR Ex i / I.S. Inputs, 16 Channels for Zone 1 / Div. 1 Series 9470/22
www.stahl.de > 16 channels for contacts and NAMUR proximity switches (EN 60947-5-6) > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit
More informationPower Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
More informationLVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:
LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement range
More informationUser Manual CTP4/8/16
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com User Manual CTP4/8/16 4/8/16-channel
More informationPOINTAX 6000L2 Point Recorder
GOSSEN METRAWATT CAMILLE BAUER Special Features 6 measuring channels Last printed point visible from front Electrically isolated, earth-free measuring channels Process signals ranging from 0/4... 20 ma,
More informationRSMFX-2R MULTIFUNCTIONAL
Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA 4 STANDARDS 4 OPERATIONAL DIAGRAMS 5 WIRING AND
More informationPhase control Single function phase control relay - 7.5 mm Control of -phase networks: phase sequence, total phase failure Multi-voltage from x 08 to x 480 V Controls its own supply voltage True RMS measurement
More informationType Nominal voltage (V) Code HSV V
Speed control Speed control relay - mm Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - -wire PNP or NPN, Namur, voltage 0-0V or volt-free contact type Works
More informationTechnical data. Safety notes. T3-LR24A-SR en v Subject to changes 1 / 2
echnical data sheet LR4A-SR Modulating rotary actuator for and -way control ball valves orque Nm Nominal voltage AC/DC 4 V Control: Modulating DC... V Position feedback: DC... V echnical data Safety notes
More informationElectronic Air / Fuel Ratio Control System
7 871 ISO 9001 Electronic Air / Fuel Ratio Control System RVW20... Electronic control unit - for use with modulating single- and dual-fuel burners - with extended functionality for mechanical air / fuel
More informationOriginal operating instructions Fail-safe inductive sensor GM504S / / 2010
Original operating instructions Fail-safe inductive sensor GM504S 704070 / 01 06 / 2010 Contents 1 Preliminary note 3 1.1 Explanation of symbols 3 2 Safety instructions 4 2.1 Safety-related requirements
More informationOEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)
Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors
More informationAnalog Input Module HART Ex i / I.S. Inputs, Channels Type 9461/
> 4 channels for 2-wire HART transmitters and 4 channels for 4-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More information