Delphi Series Filter Module - FL75L10A 75Vdc max input, 10A max output current
|
|
- Brooke Watson
- 6 years ago
- Views:
Transcription
1 FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum FEATURES ROHS Compliant Small size: 50.8 mm x 27.9 mm x 11.7mm (2.0 x 1.1 x 0.46 ) Industry standard footprint and pin-out Optimized for use with high frequency board mounted DC/DC converters ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility Printed-circuit board mountable Delphi Series Filter Module - FL75L10A 75Vdc max input, 10A max output current The Delphi series FL75L10A filter module is the latest offering from a world leader in power systems technology and manufacturing -- Delta Electronics, Inc. This filter module is designed to reduce the conducted common-mode and differential-mode noise on input or output lines of high-frequency switching power supplies and has a maximum current rating of 10A. It has the industry standard footprint and pin-out. With creative design technology and optimization of component placement, Delphi FL75L10A filter module possesses outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. APPLICATIONS Common-mode and differential-mode filtering of power supply dc input and output line Computer application Communications equipment DATASHEET DS_FL75L10_
2 SPECIFICATIONS GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Input voltage, continuous Typical 0~75V Output current Ta=70 C, no airflow 10A Input voltage, transient Typical 100V Output current Ta=85 C, no airflow 8A Operation case temperature Typical -40 ~ 110 Common-mode Insertion Loss 50Ω circuit, 500 khz (Typ) 30dB Storage temperature Typical -55 ~ 125 Differential-mode Insertion Loss 50Ω circuit, 500 khz (Typ) 25dB Size (2.0 x1.1 x0.46 ) 50.8 mm x27.9 mm x11.7 mm ELECTRICAL CHARACTERISTICS CURVES Figure 1: Typical common-mode insertion loss in a 50Ω circuit Internal Schematics Figure 2: Typical differential-mode insertion loss in a 50Ω circuit Figure 3: Internal schematics 2
3 THERMAL CONSIDERATIONS Thermal management is an important part of the system design. To ensure proper, reliable operation, sufficient cooling of the power module is needed over the entire temperature range of the module. Convection cooling is usually the dominant mode of heat transfer. Hence, the choice of equipment to characterize the thermal performance of the power module is a wind tunnel. Thermal Testing Setup THERMAL CURVES GND OUT Delta s filter modules are characterized in heated vertical wind tunnels that simulate the thermal environments encountered in most electronics equipment. This type of equipment commonly uses vertically mounted circuit cards in cabinet racks in which the power modules are mounted. The following figure shows the wind tunnel characterization setup. The filter module is mounted on a test PWB and is vertically positioned within the wind tunnel. The space between the neighboring PWB and the top of the power module is 6.35mm (0.25 ). Figure 5: Temperature measurement location The allowed maximum hot spot temperature is defined at 110 FL75L10 (Standard) Output Current vs. Ambient Temperature and Air Velocity Output Vin = 48V (Either Orientation) Natural Convection Thermal Derating 2 100LFM Heat can be removed by increasing airflow over the module. Figure 4 shows maximum output is a function of ambient temperature and airflow rate. To enhance system reliability, the power module should always be operated below the maximum operating temperature. If the temperature exceeds the maximum module temperature, reliability of the unit may be affected Ambient Temperature ( ) Figure 6: Output Current vs. Ambient Temperature and Air Vin = 48V (Either Orientation) FACING PWB PWB MODULE AIR VELOCITY AND AMBIENT TEMPERATURE MEASURED BELOW THE MODULE 50.8 (2.0 ) AIR FLOW 10 (0.4 ) Note: Wind Tunnel Test Setup Figure Dimensions are in millimeters and (Inches) Figure 4: Wind tunnel test setup figure dimensions are in millimeters and (inches). 3
4 APPLICATION Note: C2 through C5 can be 0.01μ F to o.1μ F. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended value indicated in the power module data sheet. Figure 7: Recommended schematic when used as the input filter to a high-frequency dc-to-dc converter Note: Vdc input(+) and Vdc input(-) planes should overlay each other, as should the Vi(+) and Vi(-) planes, as should the Vout(+) and Vout(-) planes. Avoid routing signals or planes under the power module or the filter module. Ensure all connections are low impedance. Figure 8: Recommended layout when used as the input filter to a high-frequency dc-to-dc converter 4
5 APPLICATION (Con.) Note: : C2 through C5 and C6 through C9 can be 0.01μ F to o.1μ F. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended value indicated in the power module datasheet. Figure 9: Recommended schematic of filter module with two power modules 5
6 Figure 10 shows the experimental result obtained by using this filter module, together with the recommended external components shown in Figures 7 and 8. The Q48SR3R335NR module is one of the Delphi series quarter brick 3.3V, 35A DCDC converters. Measured noise is greatly dependent on layout, grounding, cable orientation, and load characteristics and the variation is possible from various application conditions. Figure 10: Q48SR3R335NR A conducted noise with FL75L10 input filter MECHANICAL DRAWING Top View Side View Bottom View Dimensions are in millimeter and (inches). Tolerances : x.xx ± 0.5 mm (0.02 in), x.xxx ± 0.25 mm (0.010 in) RECOMMENDED HOLE PATTERN Dimensions are in millimeter and (inches). Tolerances : x.xx ± 0.5 mm (0.02 in), x.xxx ± 0.25 mm (0.010 in) 6
7 PART NUMBERING SYSTEM FL 75 L 10 A Product Family Input Voltage Product Series Output Current Space Option Code FL- Input EMI Filter 75-0 ~ 75V L Industry standard 10-10A A - Standard Functions B pin option MODEL LIST Module Name Input Voltage (max.) Current Rating (max.) FL75L10 A 100V 10A FL75L10 B 100V 10 A CONTACT: USA: Telephone: East Coast: West Coast: Fax: (978) DCDC@delta-corp.com Europe: Telephone: Fax: DCDC@delta-es.com Asia & the rest of world: Telephone: ext Fax: DCDC@delta.com.tw WARRANTY Delta offers a two (2) year limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. 7
8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Delta Electronics: FL75L10 A
Delphi Series Filter Module - FL75L05 A 75Vdc input, 5A current Rating
FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum FEATURES ROHS Compliant Small size: 25.4mm x 25.4mm x 10.2mm (1.0 x 1.0 x 0.4 ) Industry standard footprint and pin-out Optimized for use with high
More informationFL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum
FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum FEATURES RoHS Compliant Small size: SMD: 25.4mm x 25.4mm x 12.5mm (1.0 x 1.0 x 0.49 ) Through hole: 25.4mm x 25.4mm x 12.7mm (1.0 x 1.0 x 0.50 )
More informationDelphi D12S2R550 Non-Isolated Point of Load
FEATURES High Efficiency: 93.6% @ 12Vin, 5.0V/50A out Wide input range: 4.5V~13.8V Output voltage programmable from 0.6Vdc to 5.0Vdc via external resistors No minimum load required Fixed frequency operation
More informationDelphi D12S300-1 Non-Isolated Point of Load
FEATURES High Efficiency: 94% @ 12Vin, 5.V/6A out Wide input range: 4.5V~13.8V Output voltage programmable from.6vdc to 5.Vdc via external resistors No minimum load required Fixed frequency operation Input
More informationDelphi NE Series Non-Isolated Point of Load
FEATURES High Efficiency: 94.% @ 12Vin, 5V/2A out Size: Vertical: 3.5x15.5x12.mm (1.2 x.61 x.47 ) Horizontal: 3.5x15.5x12.9mm (1.2 x.61 x.51 ) Wide input range: 4.5V~13.8V Output voltage programmable from.59vdc
More informationQ54SJ W DC/DC Power Modules FEATURES. Q54SJ12058, 700W Quarter Brick DC/DC Power Modules: 40~60Vin, 12.2V/ 57.4A out OPTIONS APPLICATIONS
Q54SJ12058 700W DC/DC Power Modules FEATURES High efficiency: 96.4% @ 12.2V/57.4A out size : 57.9 x 36.8 x 12.0mm (2.28 x1.45 x0.47 ) (open frame) 57.9 x 36.8 x 13.4mm (2.28 x1.45 x0.53 ) (with base plate)
More informationTBD. Delphi E36SR Series DC/DC Power Modules: 18~60 in, 12V/4A out, 48W FEATURES OPTIONS APPLICATIONS
FEATURES High efficiency: 91% @ 12V/4A Size: 58.4x22.8x8.73mm (2.30 x0.90 x0.34 ) Standard footprint Industry standard pin out TBD Fixed frequency operation Input UVLO, Output OCP, OVP, OTP 1500V isolation
More informationDelphi NE Series Non-Isolated Point of Load DC/DC Modules: 3.1~13.8Vin, 0.59V-5.1Vout, 3Aout
FEATURES High efficiency: 9% @ 12Vin, 5V/3A out Size: Vertical: 9.4x15.5x6.6 mm (0.37 x0.61 x0.26 ) Horizontal: 9.4x15.5x7.9mm (0.37 x0.61 x0.31 ) Wide input range: 3.1V~13.8V Output voltage programmable
More informationDelphi Series Q48SK, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/18A out, 216W
FEATURES High efficiency : 94.7% @ 12V/18A Size: 57.9x36.8x11.2mm (2.28 x1.45 x0.44 ) (w/o heat spreader) 57.9*36.8*12.7mm(2.28 *1.45 0.50 ) (with heat spreader) Standard footprint Industry standard pin
More informationD12S1R830, Non-Isolated, Power Block
FEATURES High efficiency: 91.%@ 11Vin, 1.8V/A out 88% @ 11Vin, 1.V/A out Small size and low profile: (1. x. x.48 ) (SMD) Surface mount No minimum load required Input: UVLO, Output OCP/SCP, OVP, OTP Parallel
More informationD12S1R880D FEATURES. D12S1R880D, Non-Isolated, Power Block DC/DC Power Modules: 7.0~13.2Vin, 0.6V~1.8V/80A, 2.5V/70A, 3.3V/65A APPLICATIONS
D12S1R88D FEATURES High efficiency with @55 95.5%@ 11Vin, 3.3V/65A out 94.7%@ 11Vin, 2.5V/7A out 93.3%@ 11Vin, 1.8V/8A out 91.%@ 11Vin, 1.V/8A out 87.%@ 11Vin,.6V/8A out High accuracy current sense resistor
More informationDelphi E36SR Series DC/DC Power Modules: 18~60 in, 12V/4A out, 48W
FEATURES High efficiency: 90.5% @ 12V/4A Size: 58.4x22.8x8.73mm (2.30 x0.90 x0.34 ) Standard footprint Industry standard pin out Fixed frequency operation Input UVLO, Output OCP, OVP, OTP 1500V isolation
More informationDelphi Series S36SA, 25W Family DC/DC Power Modules: 18Vin to 60Vin, 3.3V/8A out
FEATURES High efficiency: 88.5% @ 3.3V/8A Size: 47.20mmx29.5mmx8.15mm (1.86 x1.16 x0.32 ) Wide input voltage range: 18V~60V Standard footprint Surface mountable Industry standard pin out Fixed frequency
More informationDelphi DNT04, Non-Isolated Point of Load
FEATURES High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80 x 0.45 x 0.27 (SMD) 0.90 x 0.40 x 0.25 (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable
More informationDelphi Series V48SR, 1/16 th Brick 66W
FEATURES High efficiency: 90.5% @ 15V/4.4A Size: 33.0 x 22.9 x 9.5 mm (1.30 x0.90 x0.37 ) Industry standard footprint and pinout Fixed frequency operation SMD and through-hole versions Input UVLO and OVP
More informationDelphi DNM series Non-Isolated Point of Load
Delphi DNM series Non-Isolated Point of Load DC/DC Power Modules: 8.3-14, 0.75-5.0V/10A out The Delphi series DNM, 8.3~14V input, single output, non-isolated point of load DC/DC converters are the latest
More informationDelphi DNL, Non-Isolated Point of Load
FEATURES High efficiency: 95% @ 5.0, 3.3V/16A out Small size and low profile: (SMD) 33.0x 13.5x 8.8mm (1.30 x 0.53 x 0.35 ) Surface mount packaging Standard footprint Voltage and resistor-based trim Pre-bias
More informationDelphi DNS, Non-Isolated Point of Load
FEATURES High efficiency: 94% @ 5.0, 3.3V/6A out Small size and low profile: (SIP) 25.4 x 12.7 x 6.7mm (1.00 x 0.50 x 0.26 ) Single-In-Line (SIP) packaging Standard footprint Voltage and resistor-based
More informationDelphi Series H48SC3R325, 85W Half Brick Family DC/DC Power Modules: 48V in, 3.3V/25A out
FEATURES High efficiency: 93% @ 3.3V/25A Standard footprint: 61.0x57.9x10.0mm (2.40 2.28 0.39 ) Industry standard pin out Fixed frequency operation Input UVLO, Output OCP, OVP, OTP Basic insulation 2250V
More informationDelphi series DNT12 Non-Isolated Point of Load DC/DC Power Modules: 8.3~14Vin, 0.75~5.5Vo, 3A
FEATURES High Efficiency: 93.0% @ 12Vin, 5.0V/3A out Small size and low profile: 0.80 x 0.45 x 0.27 (SMD) 0.90 x 0.40 x 0.25 (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, 3.3Vo, 50W
High efficiency: 90.5% @ 3.3V/15A, 48Vin 88.5% @ 3.3V/12A, 24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery)
More informationDelphi ND Series Non-Isolated Point of Load
FEATURES High efficiency: 94% @ 12Vin, V/4A out Size: 36.8mm x 32.2mm x 13.mm (Vertical) (1.4 x1.27 x.1 ) 36.8mm x 32.2mm x 14.8mm (Horizontal) (1.4 x1.27 x.8 ) Resistor-based trim No minimum load required
More informationDelphi DNM, Non-Isolated Point of Load
Delphi DNM, Non-Isolated Point of Load DC/DC Power Modules: 2.8-5.5, 0.75-3.63V/10A out The Delphi Series DNM04, 2.8-5.5V input, single output, non-isolated Point of Load DC/DC converters are the latest
More informationDelphi Series H48SA, 450W Half Brick Family
FEATURES High Efficiency: 92.7% @ 28V/16A Size: 61.0x57.9x12.7mm (2.40 2.28 0.50 ) Standard footprint Industry standard pin out Fixed frequency operation Metal baseplate (heatspreader) Input UVLO, Output
More informationDelphi Series Q36SR, Quarter Brick 204W DC/DC Power Modules: 18V~75Vin,12V, 17Aout
Delphi Series Q36SR, Quarter Brick 24W DC/DC Power Modules: 18V~75Vin,12V, 17Aout FEATURES High efficiency: 93% @ 12V/17A Size: 58.4x36.8x11.7mm (2.3 x1.45 x.46 ) w/o heat-spreader 58.4x36.8x12.7mm (2.3
More informationDelphi DNL, Non-Isolated Point of Load
FEATURES High efficiency: 93.5% @ 12, 5V/20A out Small size and low profile: (SIP) 50.8 x 12.7 x 9.5mm (2.00 x 0.50 x 0.37 ) Standard footprint ltage and resistor-based trim Pre-bias startup Output voltage
More informationDelphi Series S48SP, 35W 1x1 Brick DC/DC Power Modules: 48V in, 5V/7A out
FEATURES High efficiency: 9% @5V/7A Industry standard 1x2 pin out Size: 33.x24.4x8.55mm (1.3 x.96 x.34 ) SMD and Through-hole versions Fixed frequency operation 2:1 input voltage range Input UVLO, OVP
More informationDelphi Series H48SA, 150W Half Brick Family DC/DC Power Modules: 36~75V in, 48V/3.2A out
FEATURES High efficiency: 92% @48V/3.2A Size: 57.9x61.0x9.8mm (2.28 x2.40 x0.39 ) (without Heat Spreader) 57.9x61.0x12.7mm (2.28 x2.40 x0.50 ) (with Heat Spreader) Standard footprint Industry standard
More informationV48SC W DC/DC Power Modules
V48SC05017 85W DC/DC Power Modules FEATURES High efficiency : 91.5% @ 5V/17A Size: Without heat spreader: 33.0mm*22.8mm*9.5mm(1.30 *0.90 *0.37 ) With heat spreader: 33.0mm*22.8mm*12.7mm(1.30 *0.90 *0.50
More informationDelphi S36SE, 25W 1x1 Brick Series DC/DC Power Modules: 36~75V in, 12V/2A out
FEATURES High efficiency: 87% @12V/2A Size: 27.9x24.4x8.7mm (1.10 x0.96 x0.34 ) Industry standard 1x1 pinout Fixed frequency operation 36~75V input Input UVLO Output OCP, OVP and OTP Monotonic startup
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, up to 50W
High efficiency: 91%@5V/10A,48Vin 90%@5V/8A,24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery) Output
More informationDelphi Series E48SR, 66W Eighth Brick Family DC/DC Power Modules: 48V in, 15V/4A out
FEATURES High Efficiency: 91.5% @ 15V/4A Size: 58.4mmx22.8mmx8.35mm (2.30 x0.90 x0.33 ) Standard footprint Industry standard pin out Fixed frequency operation: 350KHz Input UVLO, Output OCP, OVP, OTP Basic
More informationDelphi Series T48SR, 1/32 Brick Family DC/DC Power Modules: 36~75V in, 5V/5A out, 25W FEATURES OPTIONS APPLICATIONS
FEATURES High efficiency : 86% @ 5V/5A Size: 19.1mmx23.4mmx8.9mm (0.92 x0.75 x0.35 ) Standard footprint Fixed frequency operation Hiccup output over current protection (OCP) Hiccup output over voltage
More informationDelphi DNM series Non-Isolated Point of Load
Delphi DNM series Non-Isolated Point of Load DC/DC Power Modules: 8.3-14, 0.75-5.0V/10A out The Delphi series DNM, 8.3~14V input, single output, non-isolated point of load DC/DC converters are the latest
More informationDelphi DNL, Non-Isolated Point of Load
FEATURES High efficiency: 92% @ 12, 3.3V/16A out Small size and low profile: (SMD) 33.0x 13.5x 8.8mm (1.30 x 0.53 x 0.35 ) Standard footprint ltage and resistor-based trim Pre-bias startup Output voltage
More informationEncapsulated Type. Page I-III. Page 1-15 Open-Frame Type. S36SE3R305 Datasheet
Page I-III Encapsulated Type Page 1-15 Open-Frame Type S36SE3R305 Datasheet S36SE series 17W Single output DC/DC Converter FEATURES Efficiency up to 87% Package with Industry Standard Pinout Package Dimension:
More information` FEATURES. Delphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 1.0V/50A out OPTIONS APPLICATIONS
` FEATURES High efficiency: 84.5% @1.0V/50A Size: 58.4mm x 22.8mm x 9.5mm (2.30 x0.90 x0.37 ) Industry standard pin out Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Output voltage trim:-20%,+10%
More informationDelphi Series Q48SQ, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/18A out, 216W
FEATURES Delphi Series Q48SQ, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/18A out, 216W The Delphi series Q48SQ12018, quarter brick, 36~75V input, single output, isolated DC/DC converter is
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, up to 50W
FEATURES High efficiency: 91%@5V/10A,48Vin 90%@5V/8A,24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery)
More informationDelphi series DNT12 Non-Isolated Point of Load DC/DC Power Modules: 8.3~14Vin, 0.75~5.0Vo, 3A
- FEATURES High Efficiency: 92.5% @ 12Vin, 5V/3A out Small size and low profile: 0.80 x 0.45 x 0.27 (SMD) 0.90 x 0.40 x 0.25 (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable
More informationDelphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 12V/10A out
` Delphi Series E48SH, 12W Eighth Brick Family DC/DC Power Modules: 48V in, 12V/1A out The Delphi Series E48SH Eighth Brick, 48V input, single output, isolated DC/DC converters are the latest offering
More informationDelphi Series Q48SQ, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/33A out, 400W
FEATURES High efficiency : 95.5% @ 12V/33A Size: 57.9*36.8*11.2mm(2.28 *1.45 *0.44 ) (without heat spreader) 57.9*36.8*12.7mm(2.28 *1.45 *0.50 ) (with heat spreader) Standard footprint Industry standard
More informationDelphi Series E48SP Eighth Brick Family DC/DC Power Modules: 48V in, 12V/20A out
` Delphi Series E48SP Eighth Brick Family DC/DC Power Modules: 48V in, 12V/20A out The Delphi Series E48SP, 36~60V input, Eighth Brick, single output, isolated DC/DC converters are the latest offering
More informationDelphi DCT, Non-Isolated Point of Load
FEATURES High efficiency: 94. 9% @ 12Vin, 5V/3A out Small size and low profile: 12.2x 12.2x 7.45mm (0.48 x 0.48 x 0.293 ) Surface mount packaging Standard footprint Voltage and resistor-based trim Pre-bias
More informationDelphi Series V48SR, 1/16 th Brick 65W
FEATURES High efficiency: 91.0% @ 5.0V/13A Size: 33.0 x 22.9 x 9.5 mm (1.3 x 0.90 x 0.37 ) Industry standard footprint and pinout Fixed frequency operation Input UVLO and OVP OTP and output OCP, OVP Output
More informationDelphi Series T48SR, 1/32 Brick Family DC/DC Power Modules: 36~75V in, 3.3V/7.5A out, 24.75W
FEATURES High efficiency : 86% @ 3.3V/7.5A Size: 19.1mmx23.4mmx8.9mm (0.92 x0.75 x0.35 ) Standard footprint Fixed frequency operation Hiccup output over current protection (OCP) Hiccup output over voltage
More informationDelphi Series E48SP3R340, 1/8 th Brick 132W DC/DC Power Modules: 48V in, 3.3V, 40A out
FEATURES High efficiency: 93.1% @ 3.3V/4A Size: 58.4x22.8x1.9mm (2.3 x.9 x.43 )(W/O heat-spreader) 58.4x22.8x12.7mm (2.3 x.9 x.5 )(with heat-spreader) Industry standard footprint and pin out Fixed frequency
More informationDelphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 5V/20A out
FEATURES High efficiency: 90% @5V/20A Size: 58.4mm x 22.8mm x 9.5mm (2.30 x0.90 x0.37 ) Industry standard pin out Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Monotonic startup into normal
More informationHA1SV W DC/DC Power Modules
HA1SV12008 100W DC/DC Power Modules FEATURES High efficiency : 86% @110Vin full load Size:61.0mm*57.9mm*12.7mm(2.4 *2.28 *0.5 ) Industry standard pin out and footprint Fixed frequency operation Input UVP/
More informationS24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
More informationS24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
More informationS24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
More informationS24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
More informationDelphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 1.8V/40A out
FEATURES High efficiency: 90% @1.8V/40A Size: 58.4mm x 22.8mm x9.5mm (2.30 x0.90 x0.37 ) Industry standard pin out Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Monotonic startup into normal
More informationV48SC3R320 66W DC/DC Power Modules
V48SC3R320 66W DC/DC Power Modules FEATURES High efficiency : 91.0% @ 3.3V/20A Size: Without heat spreader 33.0mm*22.8mm*9.5mm(1.30 *0.90 0.37 ) With heat spreader 33.0mm*22.8mm*12.7mm(1.30 *0.90 0.50
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationH36SA W DC/DC Power Module
H36SA54003 162W DC/DC Power Module FEATURES High efficiency: 93.5% @ 54V/3A Industry standard pin out and footprint Size: 61.0mm x 57.9mm x 13.2mm (2.40 x 2.28 x 0.52 ) with heat-spreader Fixed frequency
More informationE54SJ12040 FEATURES OPTIONS APPLICATIONS. E54SJ /8 Brick DC/DC Regulated Power Module 40~60V in, 11.8V/40.7A out, 480W. 480W DC/DC Power Modules
E54SJ12040 480W DC/DC Power Modules FEATURES Electrical Peak Efficiency up to 97.2% at 60Vin, 96.7% at 54Vin Input range: 40~60Vdc Over current protection Input UVP/OVP, Over Temperature Protection Remote
More informationS24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationDelphi Series E36SC3R3, Eighth Brick 116W DC/DC Power Modules: 18V~75Vin, 3.3V, 35Aout
FEATURES High efficiency: 91% @ 3.3V/35A Size: 58.4x22.8x11.mm (2.3 x.9 x.43 ) w/o heat-spreader 58.4x22.8x12.7mm (2.3 x.9 x.5 ) with heat-spreader Industry standard footprint and pinout Fixed frequency
More informationE48SP W DC/DC Power Modules
E48SP05040 200W DC/DC Power Modules FEATURES High efficiency: 94% @ 5V/40A Size: 58.4x22.8x11.0mm (2.30 x0.90 x0.43 ) w/o heat-spreader 58.4x22.8x12.7mm (2.30 x0.90 x0.50 ) with heat-spreader Industry
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationV36SE12004 FEATURES. Delphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, up to 50W OPTIONS APPLICATIONS
V36SE12004 FEATURES High efficiency: 88% @ 12V/4.2A, 48Vin 86% @ 12V/3.5A, 24Vin Size: 33.0x22.8x8.7mm (1.30 x0.90 x0.34 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP
More informationH48SC W DC/DC Power Module
H48SC28016 450W DC/DC Power Module FEATURES High efficiency: 95% @ 28V/16A Size: 61.0x57.9x11.2mm (2.40 x2.28 x0.44 ) w/o heat-spreader 61.0x57.9x13.2mm (2.40 x2.28 x0.52 ) with heat-spreader Industry
More informationPM24S/PM24D series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 88% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationFLTR75V05 Filter Module 75 Vdc Input Maximum, 5 A Maximum
GE Critical Power FLTR75V05 Filter Module 75 Vdc Input Maximum, 5 A Maximum RoHS Compliant The FLTR75V05 Filter Module is designed to reduce the conducted common-mode and differentialmode noise on input
More informationV36SE12005 FEATURES. Delphi Series V36SE, 1/16 th. Brick DC/DC Power Modules: 18~75Vin, up to 60W OPTIONS APPLICATIONS
FEATURES V36SE12005 High efficiency: 88% @ 12V/5A, 48Vin Size: 33.0x22.8x8.7mm (1.30 x0.90 x0.34 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery)
More informationDelphi Series E36SC120, Eighth Brick 108W DC/DC Power Modules: 18V~75Vin, 12V, 9Aout
FEATURES High efficiency: 92% @ 12V/9A Size: 58.4x22.8x11.mm (2.3 x.9 x.43 ) w/o heat-spreader 58.4x22.8x12.7mm (2.3 x.9 x.5 ) with heat-spreader Industry standard footprint and pinout Fixed frequency
More informationOutput Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
More informationFLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum
GE Critical Power FLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum RoHS Compliant The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode noise on
More informationPACSR V Output AC/DC Converter, Module Package
PACSR24012 24V Output AC/DC Converter, Module Package FEATURES Full Load Efficiency up to 92.5% @220VAC Metal Case Box Type Package Package Dimension: 110.8x50.8x13.7mm (4.36 x2.0 x0.54 ) Operating Baseplate
More informationNegative voltage step, 25% to 75% load dynamic, 0.1A/us slew rate. Vin=110/220Vac, Io=10, peak to peak, 20MHz bandwidth
PACSR48010 48V Output AC/DC Converter FEATURES Full Load Efficiency up to 94% @220VAC Metal Case Box Type Package Package Dimension: 110.8x50.8x13.7mm (4.33 x2.00 x0.54 ) Operating Baseplate Temperature
More informationDelphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out
Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
Model List Model Number Input Voltage Output Voltage Output Current Input Current (typ input voltage) (Range) Max. Min. @Max. Load @No Load Load Regulation Maxcapacitive Efficiency Load (typ.) @Max. Load
More informationDelphi Series E48SC12010, Eighth Brick Family DC/DC Power Modules: 48V in, 12V/10A out
FEATURES High efficiency: 91.7% @ 12V/10A Size: 58.4mmx22.8mmx8.4mm (2.30 x0.90 x0.33 ) (Without heat-spreader) 58.4mmx22.8mmx12.7mm (2.30 x0.90 x0.50 ) (With heat-spreader) Standard footprint Industry
More informationFLTR100V20 Filter Module 75 Vdc Input Maximum, 20 A Maximum
GE Critical Power FLTR100V20 Filter Module 75 Vdc Input Maximum, 20 A Maximum RoHS Compliant The FLTR100V20 Filter Module is designed to reduce the conducted common-mode and differential-mode noise on
More informationH80SV12017 * * FEATURES. Delphi Series H80SV, half Brick Family DC/DC Power Modules: 16.8~137.5 Vin, 54/48/24/15/12Vout,200W APPLICATIONS
H80SV12017 200W DC/DC Power Modules Delphi Series H80SV, half Brick Family DC/DC Power Modules: 16.8~137.5 Vin, 54/48/24/15/12Vout,200W The H80SV series Half-Brick is isolated 200W DC/DC converters with
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data Sheet FLTR100V10 Filter Module RoHS Compliant Features Compatible with
More information*LAST TIME BUY: 3/31/2015. CLICK HERE FOR OBSOLESCENCE NOTICE OF 10/31/2014. Model VR110B150CS-1C VR110B150CL-1C Maximum input current
www.murata-ps.com *LAST TIME BUY: 3/31/2015. CLICK HERE FOR OBSOLESCENCE NOTICE OF 10/31/2014. To Be Discontinued* DESCRIPTION The is designed to meet the fast load transients required by Intel Xeon processors
More informationNCS6 Series Isolated 6W 4:1 Input Single & Dual Output DC-DC Converters
www.murata-ps.com NCS Series Isolated W : Input Single & Dual Output DC-DC Converters FEATURES UL 9 recognised RoHS compliant : Wide range voltage input Operating temperature range C to 8 C Typical load
More informationDN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
More informationNCS1 Series Isolated 1W 4:1 Input Single Output DC/DC Converters
NCS1 Series SELECTION GUIDE FEATURES UL 9 recognised 4:1 Wide range voltage input Operating temperature range -4 C to 15 C with derating 1kVDC Isolation Hi Pot Test 3.3V, 5V & 12V outputs No electrolytic
More informationDelphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 12V/10A out
` Delphi Series E48SH, 12W Eighth Brick Family DC/DC Power Modules: 48V in, 12V/1A out The Delphi Series E48SH Eighth Brick, 48V input, single output, isolated DC/DC converters are the latest offering
More information-80 to +80V 20A 100ºC 250kHz. Input Output Current Max DC Resistance Differential Attenuation
EMI Filter Quarter Brick MILITARY COTS EMI FILTER -80 to +80V 20A 32mΩ @ 100ºC >80dB @ 250kHz Input Output Current Max DC Resistance Differential Attenuation The Mil-COTS series of EMI filters brings SynQor
More informationCOTS EMI FILTER -500V
Passive Filter Half-Brick MILITARY COTS EMI FILTER -500V to +500V 9A 80mΩ @ 100 C >80dB @ 250kHz Continuous Input Output Current Max. DC Resistance Differential Attenuation FULL POWER OPERATION: -55ºC
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More information0RCY-F0S10x Isolated DC-DC Convert
0RCY-F0S10x Isolated DC-DC Convert The 0RCY-F0S10x is an isolated DC/DC converter that operate from a nominal 50 V/54 V source. This converter is intended to provide isolation and step down to generate
More information25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
More information0RQB-X3S11B(F) Isolated DC-DC Converter
0RQB-X3S11B(F) Isolated DC-DC Converter The 0RQB-X3S11B(F) is an isolated DC/DC converter that operates from a nominal 50/54 Vdc source. This converter is intended to provide isolation and step down to
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More information6. SAFETY 6.1 Input Fusing and Safety Considerations.
Content 1. INTRODUCTION 2. MODELS 3. CONERTER FEATURES 4. GENERAL DESCRIPTION 4.1 Electrical Description 4.2 Thermal Packaging and Physical Design. 5. MAIN FEATURES AND FUNCTIONS 5.1 Operating Temperature
More informationSE014S110 Power Module; dc-dc Converter: 48 Vdc Input, 110 Vdc Output, 14 W
Data Sheet SE014S110 Power Module; dc-dc Converter: Features The SE014S110 Power Module uses advanced, surface-mount technology and delivers high-quality, compact, dc-dc conversion at an economical price.
More informationMER1 Series 1kVDC Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MER1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationMEF1 Series Isolated 1W Regulated Single Output DC/DC Converters
www.murata-ps.com MEF1 Series FEATURES UL695 recognised Short circuit protection Operation to zero load Output regulation
More informationRT mA Dual LDO Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) Marking Information
RT9055 300mA Dual LDO Regulator General Description The RT9055 is a dual channel, low noise, and low dropout regulator sourcing up to 300mA at each channel. The output voltage range is from 0.9V to 3.5V
More informationNetworking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationSELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 1 Ripple & Noise (Max) 1 Efficiency
More informationRT9064. Ultra Low Power, 14V, 200mA Low-Dropout Linear Regulator. General Description. Features. Pin Configurations. Applications
RT9064 Ultra Low Power, 14V, 200mA Low-Dropout Linear Regulator General Description The RT9064 is a low-dropout (LDO) linear regulator that features high input voltage, low dropout voltage, ultra-low operating
More informationFCW SERIES 15W WIDE INPUT RANGE
FCW SERIES 15W WIDE RANGE FEATURES 15W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-72V,9-36V,18-72V WIDE RANGE REGULATED 100% BURN IN UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS
More information