FCW SERIES 15W WIDE INPUT RANGE
|
|
|
- Annabella Walker
- 6 years ago
- Views:
Transcription
1 FCW SERIES 15W WIDE RANGE FEATURES 15W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-72V,9-36V,18-72V WIDE RANGE REGULATED 100% BURN IN UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY SPECIFICATIONS SPECIFICATIONS Voltage Set-point Accuracy +/-2% max. Input Voltage Range 2:1 4:1 Input Range Temperature Coefficient +/-0.05%/ C Input Filter Pi Netwk Ripple & Noise(20MHz BW) 1 100mVp-p max. Protection Fuse Recommended Line Regulation 2 +/-0.5% max. Start up time (Nominal input) Vin: 12V & 24V 25ms max. Load Regulation 3 +/-0.5% max. Start up time (Nominal input) Vin: 48V 1s max. Minimum Load 10% of Full Load GENERAL SPECIFICATIONS Sht Circuit Protection Continuous Efficiency 76% min. Sht Circuit Restart Automatic Isolation Voltage VDC min Standard Models Over Load Protection 180% typ VDC min Suffix 3K Models Transient Response 5 200uS max. Isolation Resistance 10 9 ohms min. Isolation Capacitance Switching Frequency 550pF max. 150 KHz min. ENVIRONMENTAL SPECIFICATIONS MTBF 6 >700,000 Hours Operating Temperature -25 C to +71 C Weight 31.2g typ. Case Temperature +90 C max. Case Material Six-Side Shielded Case Stage Temperature -55 C to +125 C Case Size 50.8mm*25.4mm*11.2mm Humidity 95% max. Potting Material Epoxy(UL94V-0) Cooling Free-Air Convection Radiated Emissions EN55032 Class A ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL, AND 25 C UNLESS OTHERWISE NOTED. 1 Measured with 1uF ceramic capacit connect to the output pins. 2 High Line to Low Line. 3 Load Regulation is f output load current change from 10% to 100% VDC f 10 seconds,3000vdc f 1 seconds. 5 25% Step Load Change. 6 C, Ground Benign. 1
2 SELECTION GUIDE(1) 2:1 10W-15W MODEL NUMBER VOLTAGE (VDC) VOLTAGE (VDC) CURRENT (ma) 7 CURRENT(mA) FULL NO EFF (%) 8 CAPACITOR MAX. FCWS (A) (-3K) uF FCWS-1205(A) (-3K) uF FCWS-1212(A) (-3K) uF FCWS-1215(A) (-3K) uF FCWS-1224(A) (-3K) uF FCWD-1205(A) (-3K) /-5 +/ /-1200uF FCWD-1212(A) (-3K) /-12 +/ /-820uF FCWD-1215(A) (-3K) /-15 +/ /-680uF FCWD-1224(A) (-3K) /-24 +/ /-560uF FCWS (A) (-3K) uF FCWS-2405(A) (-3K) uF FCWS-2409(A) (-3K) uF FCWS-2412(A) (-3K) uF FCWS-2415(A) (-3K) uF FCWD-2405(A) (-3K) /-5 +/ /-1200uF FCWD-2412(A) (-3K) /-12 +/ /-820uF FCWD-2415(A) (-3K) /-15 +/ /-680uF FCWS (A) (-3K) uF FCWS-4805(A) (-3K) uF FCWS-4809(A) (-3K) uF FCWS-4812(A) (-3K) uF FCWS-4815(A) (-3K) uF FCWS-4824(A) (-3K) uF FCWD-4805(A) (-3K) /-5 +/ /-330uF FCWD-4812(A) (-3K) /-12 +/ /-220uF FCWD-4815(A) (-3K) /-15 +/ /-100uF Note: Other input to output voltages may be available. Please contact facty. 7 NOMINAL VOLTAGE. 8 NOMINAL VOLTAGE,FULL. 2
3 SELECTION GUIDE(2) 4:1 10W-15W MODEL NUMBER VOLTAGE (VDC) VOLTAGE (VDC) CURRENT (ma) 9 CURRENT(mA) FULL NO EFF (%) 10 CAPACITOR MAX. FCWS T(A) uF FCWS-1205T(A) uF FCWS-1209T(A) uF FCWS-1212T(A) uF FCWS-1215T(A) uF FCWD-1205T(A) /-5 +/ /-660uF FCWD-1209T(A) /-9 +/ /-660uF FCWD-1212T(A) /-12 +/ /-660uF FCWD-1215T(A) /-15 +/ /-660uF FCWS T(A) uF FCWS-2405T(A) uF FCWS-2412T(A) uF FCWS-2415T(A) uF FCWD-2405T(A) /-5 +/ /-470uF FCWD-2409T(A) /-9 +/ /-470uF FCWD-2412T(A) /-12 +/ /-470uF FCWD-2415T(A) /-15 +/ /-470uF Note: Other input to output voltages may be available. Please contact facty. 9 NOMINAL VOLTAGE. 10 NOMINAL VOLTAGE,FULL. 3
4 MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN SINGLE DUAL NP 5 NOTE: Pin Size is Tolerance 1.00Φ ±0.10mm All dimensions are in millimeters [inches] Tolerance.X.XX= ±0.80mm 4
5 MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS REMOTE CONTROL(Specially Models)PACKAGE A NOTE: PIN SINGLE DUAL NP 5 6 Remote ON/OFF Pin Size is Tolerance 1.0Φ ±0.10mm All Dimensions In mm(inches) Tolerance.X.XX= ±0.80mm 5
6 SIMPLIFIED SCHEMATIC SINGLE DUAL PWM CONTROLLER ISOLATION REFERENCE & ERROR AMP PWM CONTROLLER ISOLATION REFERENCE & ERROR AMP TYPICAL APPLICATIONS SINGLE DUAL DC-DC CONVERTER DC-DC CONVERTER 1 2 TYPICAL PERFORMANCE CURVES Specifications typical at Ta=25 C,nominal input voltage, rated output current unless otherwise specified. VS EFFICIENCY TEMPERATURE DERATING EFFICIENCY( % OF RATED (%) POWER(%) 125% 100% 75% 50% 25% 0% SAFE OPERATING AREA TA(degree C) 6
7 Recommended Filter f EN55032 Class B Compliance The components used in the above figure, together with the manufacturer s part numbers f these components, are as follows: FCW*-12**(A)(-3K) FCW*-24**(A)(-3K) FCW*-12**T(A) FCW*-48**(A)(-3K) FCW*-24**T(A) C1 C2 C3 C4 L1 3.3uF/50V N/A 1000pF/2KV 1000pF/2KV 325uH pF/3KV 1000pF/3KV Choke 3.3uF/50V N/A 1000pF/2KV 1000pF/2KV 325uH pF/3KV 1000pF/3KV Choke 1.5uF/100V 1.5uF/100V 1000pF/2KV 1000pF/2KV 325uH pF/3KV 1000pF/3KV Choke C3 +Input F1 L1 + Vin + Vout C1 C2 DC-DC CONVERTER Load -Input C4 Recommended EN55032 Class B Filter Circuit Layout 7
8 FUSE SELECTION GUIDE 9-18V & 9-36V 18-36V & 18-72V VOLTAGE(VDC) VOLTAGE(VDC) 36-72V VOLTAGE(VDC) 3000mA Slow-Blow Type 1400mA Slow-Blow Type 700mA Slow-Blow Type Fuse DC-DC CONVERTER -Vi n Note: Certain applications may require the installation of external fuse in front of the input. FCW SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: No external capacitance is required f operation of the FCW series. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 220KHz is required. External output capacitance is not required f operation, however it is recommended that 10uF tantalum and 0.1uF ceramic capacitance be selected f reduced system noise. Additional output capacitance may be added f increased filtering, but should not exceed 1000uF. We Can Offer EMC-Filter Accding To EN55032 Class B. Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting OUT as the negative output. FOR MORE INFORMATION CALL: Danube Enterprise Co., Ltd. Tel: Fax: danube@ms10.hinet.net Home Page 8
Voltage Setpoint Accuracy +/-2% max Input Voltage Range 2:1 3:1 4:1 Input Range. +/-0.5% max GENERAL SPECIFICATIONS
FEATURES W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-8V,8-6V,6-7V,9-7V,8-V, 9-6V,8-7V WIDE RANGE NO EXTERNAL COMPONENTS REQUIRED REGULATED 00% BURN IN HIGH EFFICIENCY UL 9V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS
Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max. Temperature Coefficient +/-0.05%/ C Input Filter Capacitor Typ
PU-S SERIES 1W UNREGULATED FEATURES CONTINOUS SHORT CIRCUIT PROTECTION SINGLE IN LINE PACKAGE 100% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL RoHS COMPLIANT
Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max. +/-8% max. +/-12% max. Short Circuit Protection Momentary Efficiency 70%-82%
MU SERIES W UNREGULATED FEATURES SINGLE IN LINE PACKAGE UP TO W UNREGULATED POWER 00% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY LOW COST NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS
ESD01S-MU SERIES 1W UNREGULATED
ESD0S-MU SERIES W UNREGULATED FEATURES SINGLE IN LINE PACKAGE UP TO W UNREGULATED POWER 00% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY LOW COST NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM
http://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
http://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
ISOLATED DC-DC Converter EC4SAW SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC4SAW SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Wade Joyce Research and Development Department Danny Jack Benny Quality Assurance
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
MI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications
MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard
9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features
PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input
PXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
Series AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
URA_LD-15W & URA_LD-20W Series 15/20W, 4:1ULTRA WIDE INPUT ISOLATED & REGULATED DUAL OUTPUT DC-DC CONVERTER
URA_LD-15W & URA_LD-20W Series 15/20W, 4:1ULTRA WIDE INPUT ISOLATED & REGULATED DUAL OUTPUT DC-DC CONVERTER Patent Protection RoHS FEATURES Efficiency up to 88% Ultra wide input voltage range(4:1) Good
For more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
Output Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
MI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
URA_LD-15W & URA_LD-20W Series 15/20W, 4:1ULTRA WIDE INPUT ISOLATED & REGULATED DUAL OUTPUT DC-DC CONVERTER
URA_LD-15W & URA_LD-20W Series 15/20W, 4:1ULTRA WIDE INPUT ISOLATED & REGULATED DUAL OUTPUT DC-DC CONVERTER Patent Protection RoHS FEATURES Efficiency up to 88% Ultra wide input voltage range(4:1) Good
Pinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
ISOLATED DC-DC Converter EC4A-E SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC4A-E SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Eunice Joyce Research and Development Department Danny Jack Benny Quality Assurance
OVP 2:1. Wide Range. Protection
10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A
ISOLATED DC-DC Converter EC2SAN SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Research and Development Enoch Danny Eunice Department Engineering Department (Quality
PXD10-Single Output DC/DC Converter
PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input
500 ma DC-DC Step Down Converter P78G-Series
500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating
Efficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Eunice Joyce Research and Development Department Danny Jack Benny Engineering Department
NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input 5 Vdc - 12 Vdc/1A Output
NONISOLATED DC/DC CONVERTERS 9.0 Vdc 18 Vdc Input 5 Vdc 12 Vdc/1A Output xrah01k Series RoHS Compliant Rev.A NonIsolated High Efficiency Fixed Frequency (450kHz) UL609501 Recognized (UL/cUL) Low Profile
25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
Output Current Max (ma) Isolation (VDC)
Models Single output Model Input FEATURES: RoHS Compliant Operating Temperature - C to + 85 C High Efficiency up to 84% Continuous Short Circuit Protection Remote On / Off Control Wide 2:1 Input Range
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
AS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
Series AM30EW-Z 30 Watt DC-DC Converter
EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous
Series AM30EW-Z 30 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage Ultra Wide :1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 100VDC Soft
MIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
-6W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range UL19 Safety Approval Complies with EN22 Class A Temperature Performance
ISOLATED DC/DC CONVERTERS 48 Vdc Input, 12 Vdc/8.35 A Output
0RQB-C0U12C RoHS Compliant PRELIMINARY Rev.A Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Low Cost Remote On/Off Input Under Voltage Lockout
Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications
Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and
Series AM20EW-Z 20 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model FEATURES: Input Voltage RoHS Compliant Soft start Ultra wide 4:1 Input range Industrial temperature range -40 to +85 C Adjustable
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
Input Load (ma) Typ.
1. Features Wide 4 : 1 Input Range Low Ripple And Noise Input / Output Isolation 1.5K Vdc Or K Vdc 100% Burn-In Input - Filter Custom Design Available Net Weight: 12 g / g Typical RoHS Converter Certified
ISOLATED DC-DC Converter EC2SA SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SA SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Danny Joyce Research and Development Department Jack Benny Quality Assurance Department
Distributing Tomorrow s Technologies For Today s Designs Toll-Free:
3W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 82 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range Low Cost Complies with EN022 Class A Temperature Performance -2 to +71
ISOLATED DC-DC Converter EC1TAN SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC1TAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Danny Joyce Research and Development Department Jacky Jack Benny Engineering Department
High power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
S24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
ISOLATED DC/DC CONVERTERS 48 Vdc Input 2.5 Vdc /20 A Output, 1/8 Brick Converter
0RCB-60T02x Rev.B RoHS Compliant File Rev.A Isolated Output Over-Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Fixed Frequency (300 khz) Remote On/Off Low Cost
PRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment
FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative
100W DC-DC Half-Brick Regulated Single Output Converter
SPECIFICATION MODEL OUTPUT INPUT DC VOLTAGE CURRENT RANGE RATED POWER LINE REGULATION LOAD REGULATION SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) RATED DC INPUT VOLTAGE RANGE SURGE
Bothhand USA. Features. Isolated DC-DC Converters HAA5 Series -- 5 Watt
Features Wide 2 : 1 Input Voltage Range(9~18V, 18~36V, 36~75V) I/O-Isolation Voltage: 4000VACrms Isolation Test Voltage 6000VDC Extended Operating Temperature Range: -40 C to +85 C Output Short Circuit
WAF S 12 W - N S DR Series Name Input Output Output Input Remote Control Load Share Assembly Voltage Quantity Voltage Range Option Option Option
Railway Automation Datacom IPC Industry Measurement Telecom Charger Automobile Boat Medical PV PART NUMBER STRUCTURE WAF300-48 S 12 W - N S DR Series Name Input Output Output Input Remote Control Load
ISOLATED DC/DC CONVERTERS 48 Vdc Input 1.2 Vdc - 12 Vdc / 8.33 A - 30 A Output, 1/8 Brick Converter
48 Vdc Input 1.2 Vdc 12 Vdc / 8.33 A 3 Output, 1/8 Brick 0RCY85T Series RoHS Compliant Rev.B Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection
DC/DC Converter K78xx-500R2 Series
Converter K78xx-5R Series Wide input voltage, non-isolated & regulated single output Patent Protection RoHS FEATURES Efficiency up to 96% Operating temperature range: -4 to + Low ripple & noise Supporting
For more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
S24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
Features. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
PM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
AA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C
MLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators. Key Features:
MLSR100 Series High Efficiency, 1.0A Surface Mount, POL Switching Regulators Electrical Specifications Specifi cations typical @ +25 C, nominal input voltage & rated output current, unless otherwise noted.
Bothhand USA. Features. Isolated DC-DC Converters BOB5W Series -- 5 Watt
Features Wide 4 : 1 Input Voltage Range(9~36V,18~75V) Remote On/Off Input / Output Isolation Voltage: 1.5K VDC Extended Operating Temperature Range: -40 C to +85 C Output Short Circuit Protection: Continuous
DC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
Distributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 81 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA1 Safety Approval Low Ripple and Noise Short Circuit Protection Complies
WRA_CKS-1W & WRB_CKS-1W Series 1W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER
WRA_CKS-W & WRB_CKS-W Series W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER FEATURES 2: wide input range 500VDC Isolation Short circuit protection (automatic recovery) Remote
Note1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
40 Watt TMF Single and Dual Series
Watt TMF Single and Dual Series Efficiency up to 91% 10VDC Isolation MTBF > 328,000 Hours 4:1 Wide Input Over Voltage Protection Short Circuit Protection Six Sided Shielding Remote On/Off Control RoHS
6S8W_3RP Series 6W - Dual/Single Output - Wide Input - Isolated & Regulated DC-DC Converter
6 Watt Highest power density in SIP8 package Low profile (L*W*H=21.8*9.2*11.1 mm) 2:1 wide input voltage range Isolation 3000VDC High Efficiency up to 88% Short circuit protection (SCP; (automatic recovery)
AA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40
Switching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package
Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very
Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
ISOLATED DC-DC CONVERTER CEB75 SERIES APPLICATION NOTE
ISOLATED DC-DC CONVERTER CEB75 SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Louis Joyce Research and Development Department Danny Quality Assurance Department
RPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
S24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
MTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
Series AM1L-NZ 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series M1-NZ FETURES: Single, Dual, & Dual Separated Models SMD Package ow ripple and noise High efficiency up to 83% Operating temperature -40 o C to
Efficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S
FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement
Features. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
RPP30. Features ICE Technology* POWERLINE+ 30 Watt 2:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C MinimumTemp. Built-in FCC/EN55022 Class B Filter 2:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate
Add suffix /W/X3 for wired version with both analogue and PWM dimming controls (six wires) (a)
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature
CV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load
Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
S24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
S24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
MLSR7805. Series. Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators.
. 7/18 MLSR7805 Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators Key Features: Efficiency to 95% 0.5A Output Current Meets EN 62368 Miniature SMT Case Short Circuit Protected 0.2 ma No-Load
Encapsulated Power Supply
0 Watt Features AC/DC Power Modules PCB Mounting or Chassis Mounting with Screw Terminals Fully encapsulated Plastic Case Single, Dual and Triple Output Models Universal Input 8- VAC, 7-0 Hz High Efficiency
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
S24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
NLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
Ripple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
Features. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
NLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
ISOLATED DC-DC CONVERTER EC4SBW SERIES APPLICATION NOTE
ISOLATED DC-DC CONVERTER EC4SBW SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny Eunice Research and Development Department Jacky David Benny Quality Assurance
NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc Vdc/3 A Output
VRBA03A1Ax RoHS Compliant Rev.A NonIsolated UnderVoltage Lockout (UVLO) Fixed Frequency OCP/SCP High Efficiency Remote On/Off High Power Density Wide Trim Range Active Low/High (Option) Wide Input Range
DC/DC Converter URA_ZP-6WR3 & URB_ZP-6WR3 Series
/ Converter FEATURES 6W,Ultra wide input, isolated & regulated dual/ single output, DIP package, - converter CB Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 88% No-load power
Specifications ( typical at 25 C, nominal input voltage, rated output current unless otherwise specified )
Features Regulated Converters Description UL Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature Protected
NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc Vdc/16 A Output
NONISOLATED DC/DC CONVERTERS 8.3 Vdc 14 Vdc Input 0.75 Vdc 5.0 Vdc/16 A Output SRBC16A2Ax RoHS Compliant Rev.A NonIsolated Undervoltage Lockout (UVLO) High Over Temperature Protection High Power Density