SPECIFICATION Item no.: T60404-N4646-X100

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SPECIFICATION Item no.: T60404-N4646-X100"

Transcription

1 VACUUMSCHMELZE SPECFCATON tem no.: T60404-N4646-X100 K-No.: A Current Sensor Date: For the electronic measurement of currents: solation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customer: Standard type Customers Part no.: Page 1 of 2 Description Closed loop (compensation) Current Sensor with magnetic field probe Printed circuit board mounting Casing and materials UL-listed Electrical data Ratings Characteristics Excellent accuracy Very low offset current Very low temperature dependency and offset current drift Very low hysteresis of offset current Short response time Wide frequency bandwidth Compact design Reduced offset ripple Applications Mainly used for stationary operation in industrial applications: AC variabel speed drives and servo motor drives Static converters for for DC motor drives Battery supplied applications Switched Mode Power Supplies (SMPS) Power Supplies for welding applications Uninterruptable Power Supllies (UPS) PN Primary nominal r.m.s. current 100 A R M Measuring resistance V C=± 12V Ω V C=± 15V Ω Secondary nominal r.m.s. current 100 ma K N Turns ratio 1: 1000 Accuracy Dynamic performance data min. typ. max. Unit P,max Max. measuring V C = ±12V, R M = 10 Ω (t max = 10sec) ±230 V C = ±15V, R M = 40 Ω (t max = 10sec) ±180 A X PN, T A= 25 C % ε L Linearity 0.1 % 0 Offset P=0, T A= 25 C ma t r Response time 1 µs Δt ( P,max) Delay time at di/dt = 100 A/µs 200 ns f Frequency bandwidth DC khz General data min. typ. max. Unit T A Ambient operating temperature C T S Ambient storage temperature C m Mass 14 g V C Supply voltage ±11.4 ±12 or ±15 ±15.75 V C Current consumption 18 ma Constructed and manufactored and tested in accordance with EN (primary vs. secondary) Reinforced insulation, nsulation material group 1, Pollution degree 2 S clear Clearance (component without solder pad) 12 mm S creep Creepage (component without solder pad) 12 mm V sys System voltage overvoltage category 3 RMS 600 V V work Working voltage (table 7 acc. to EN ) over voltage category 2 RMS 1000 V U PD Rated discharge voltage peak value 1225 V Maximal continuous and peak currents at defined temperatures Supply voltage ±12 V: Supply voltage ±15V: T A 85 C 85 C 70 C 55 C P 60 A 100 A 80 A 100 A P,max 235 A 149 A 241 A 246 A R M 10 Ω 36 Ω 10 Ω 10 Ω T A 85 C 85 C 70 C 55 C P 50 A 75 A 70 A 100 A P,max 182 A 130 A 184 A 186 A R M 40 Ω 70 Ω 40 Ω 40 Ω Date Name suue Amendment 81 KB-PM A: Sn. designer check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden

2 VACUUMSCHMELZE SPECFCATON tem no.: T60404-N4646-X100 K-No.: A Current Sensor Date: For the electronic measurement of currents: solation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customer: Standard type Customers Part no.: Page 2 of 2 Mechanical outline (mm): General tolerances DN SO 2768-c 14,3 6, Toleranz der Stiftabstände ±0,2mm (Tolerances grid distance) Connections: 1...3: 0,7 x 0,7 mm 22,86 36,5 5,08 DC = Date Code F = Factory *= vorläufig (preliminary) Marking: 4646X100 F DC 27,6 F DC 8,5 12,35 4,5±0,5* 0,4 12,7 0,7x0,7 Schematic diagram i V c 3 s RM Ca 2 - V c M Temperature of the primary conductor should not exceed 110 C Additional indications are obtainable on request. This specification is no declaration of warranty acc. BGB 443 dar. KB-PM A: Sn. designer check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden

3 Additional nformation tem No.: T60404-N4646-X100 VACUUMSCHMELZE K-No.: A Current Sensor For electronic current measurement: isolation between primary circuit (high power) and secondary circuit Date: Customer: Customers Part No.: Page 1 of 3 Electrical Data (investigate by a type checking) min. typ. max. Unit V Ctot Maximum supply voltage (without function) ±18 V ±15.75 to ±18 V: for 1s per hour R S Secondary coil T A=85 C 38.5 Ω X Ti Temperature drift of T A = C 0.1 % 0ges Offset current (including 0, 0t, 0T) 0.14 ma 0t Long term drift Offset current ma 0T Offset current temperature drift T A = C 0.05 ma 0H Hyteresis P=0 (caused by primary current 10 x PN) ma 0/ V C Supply voltage rejection ratio 0.01 ma/v i oss Offset ripple (with1 MHz- filter first order) 0.2 ma i oss Offset ripple (with 100 khz- filter first order) ma i oss Offset ripple (with 20 khz- filter first order) ma C k Maximum possible coupling capacity (primary secondary) 6 pf nspection (Measurement after temperature balance of the samples at room temperature) K N(N 1/N 2) (V) M3011/6 Transformation ratio ( P=100A, Hz) 1 : 1000 ± 0,5 % 0 (V) M3226 Offset current < 0.1 ma V d (V) M3014: Test voltage, rms, 1 s 1.8 kv pin 1 3 vs. hole V e (AQL 1/S4) Partial discharge voltage acc.m3024 (RMS) 1300 V with V vor (RMS) 1625 V Type Testing (Pin 1-3 to hole) V W HV transient test according to M3064 (1,2 µs / 50 µs-wave form) 8 kv V d Testing voltage to M3014 (5 s) 3,6 kv V e Partial discharge voltage acc.m3024 (RMS) 1300 V with V vor (RMS) 1625 V Datum Name ndex Änderung 81 designer Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres nhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten KB-PM A: Sn. check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden.

4 Additional nformation tem No.: T60404-N4646-X100 VACUUMSCHMELZE K-No.: A Current Sensor For electronic current measurement: isolation between primary circuit (high power) and secondary circuit Date: Customer: Customers Part No.: Page 2 of 3 Limit curve of measurable current Î P(R ambient temperature 85 C Maximum measuring range (µs-range) Output current behaviour of a 3kA current V C = ±15V und R M= 100Ω N P * Î P [A] V C = +/-15V - 5% [A] V C = +/-12V - 5% R M [Ω] 200 p [A] 0 a / KN [A] t [µs] Fast increasing currents (higher than the specified p,max), e.g. in case of a short circuit, can be transmitted because the currents are transformed directly and be limited by diodes only. The offset ripple can be reduced by an external low pass. Simplest solution is a passive low pass filter of 1st order with f g 1 = 2π R M C a n this case the response time is enlarged. t is calculated from: t t + 2, 5R r r M C a Applicable documents Current direction: A positive output current appears at point S, by primary current in direction of the arrow. Housing and bobbin material UL-listed: Flammability class 94V-0. designer Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres nhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten KB-PM A: Sn. check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden.

5 Additional nformation tem No.: T60404-N4646-X100 VACUUMSCHMELZE K-No.: A Current Sensor For electronic current measurement: isolation between primary circuit (high power) and secondary circuit Date: Customer: Customers Part No.: Page 3 of 3 Explanation of several of the terms used in the tablets (in alphabetical order) 0H: 0t: Zero variation after overloading with a DC of tenfold the rated value (R M = R MN) Long term drift of o after 100 temperature cycles in the range -40 bis 85 C. t r: Response time, measured as delay time at P = 0,8. Pmax between a rectangular current and the output current. t ( Pmax): Delay time between Pmax and the output current i a with a primary current rise of di 1/dt = 100 A/µs. U PD Rated discharge voltage (recurring peak voltage separated by the insulation) proved with a sinusoidal voltage V e U PD = 2 * V e / 1,5 V vor Defined voltage is the RMS valve of a sinusoidal voltage with peak value of 1,875 * U PD required for partial discharge test in EC V vor = 1,875 *U PD / 2 V sys System voltage RMS value of rated voltage according to EC V work Working voltage voltage according to EC which occurs by design in a circuit or across insulation X ges( PN): The sum of all possible errors over the temperature range by measuring a current PN: X ges = 100 S K ( ) N PN 1 X: Permissible measurement error in the final inspection at RT, defined by X = 100 SB 1 where SB is the output DC value of an input DC current of the same magnitude as the (positive) rated current ( o = 0 ) X Ti: ε L: Temperature drift of the rated value orientated output term. (cf. Notes on F i) in a specified temperature range, obtained by: X Ti = 100 SB ( T ) ( T ) A2 Linearity fault defined by SB ε L = A1 P 100 PN Where P is any input DC and Sx the corresponding output term. : see notes of F i ( o = 0). Sx This Additional information is no declaration of warranty according BGB $443. designer Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres nhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten KB-PM A: Sn. check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden.

6 Mouser Electronics Authorized Distributor Click to View Pricing, nventory, Delivery & Lifecycle nformation: Vacuumschmelze: T60404-N4646-X100

SPECIFICATION Item no.: T60404-N4646-X410

SPECIFICATION Item no.: T60404-N4646-X410 VACUUMSCHMELZE SPECFCATON tem no.: T60404-N4646-X410 K-No.: 24616 50 A Current Sensor Date: 28.01.2008 For the electronic measurement of currents: solation between the primary circuit (high power) and

More information

SPECIFICATION Item no.: T60404-N4646-X100

SPECIFICATION Item no.: T60404-N4646-X100 VACUUSCHELZE SPECFCATON tem no.: T60404-N4646-X100 For the electronic measurement of currents: solation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customer:

More information

SPECIFICATION Item no.: T60404-N4646-X201

SPECIFICATION Item no.: T60404-N4646-X201 SPECFCATON tem no.: T60404-N4646-X201 For the electronic measurement of currents: isolation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customer: Standard type

More information

SPECIFICATION Item no.: T60404-N4646-X300

SPECIFICATION Item no.: T60404-N4646-X300 SPECFCATON tem no: T60404-N4646-X300 K-No: 24577 Date: 16042014 For the electronic measurement of currents: solation between the primary circuit (high power and the secondary circuit (electronic circuit

More information

SPECIFICATION Item no.: T60404-N4646-X651

SPECIFICATION Item no.: T60404-N4646-X651 VACUUMSCHMELZE SPECIFICATION Item no: T60404-N4646-X651 K-no: 24507 25 A Current Sensor modul for 5V-supply voltage Date: 10122010 For electronic current measurement: DC, AC, pulsed, mixed, with a galvanic

More information

SPECIFICATION Item no.: T60404-N4646-X662

SPECIFICATION Item no.: T60404-N4646-X662 SPECIFICATION Item no: T60404-N4646-X662 K-no: 24512 15 A Current Sensor for 5V- Supply Voltage Date: 182014 For electronic current measurement: DC, AC, pulsed, mixed, with a galvanic isolation between

More information

SPECIFICATION Item no.: T60404-N4646-X663

SPECIFICATION Item no.: T60404-N4646-X663 SPECIFICATION Item no: T60404-N4646-X663 K-no: 24513 6 A Current Sensor for 5V- Supply Voltage Date: 182014 For electronic current measurement: DC, AC, pulsed, mixed, with a galvanic isolation between

More information

SPECIFICATION Item no.: T60404-N4644-X101

SPECIFICATION Item no.: T60404-N4644-X101 SPECFCATON tem no.: T60404-N4644-X0 K-no.: 50 A Current Sensor-Module Date: 24.02.204 solation between the primary circuit (electronic circuit) Customer: Standard type Customers Part no.: Page of 2 Description

More information

SPECIFICATION Item no.: T60404-N4646-X764

SPECIFICATION Item no.: T60404-N4646-X764 Customer: Standard type Customers Part no: Page 1 of 4 Description Closed loop (compensation) Current Sensor with magnetic field probe Printed circuit board mounting Casing and materials UL-listed Electrical

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current transducer LF 510-S I PN = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current transducer LF 2010-S I PN = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current Transducer LF 2010-S/SPA0 I P N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current transducer LF 510-S/SP13 I PN = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current Transducer CAS 25-NP/SP2 N = 25 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed loop (compensated)

More information

I PN. Ref: HO 50-S, HO 100-S, HO 150-S, HO 200-S, HO 240-S, HO 250-S

I PN. Ref: HO 50-S, HO 100-S, HO 150-S, HO 200-S, HO 240-S, HO 250-S Current Transducer HO-S series I PN = 50, 100, 150, 200, 240, 250 A Ref: HO 50-S, HO 100-S, HO 150-S, HO 200-S, HO 240-S, HO 250-S For the electronic measurement of current: DC, AC, pulsed..., with galvanic

More information

Ref: HO 50-S/SP33, HO 100-S/SP33, HO 150-S/SP33, HO 200-S/SP33, HO 250-S/SP33

Ref: HO 50-S/SP33, HO 100-S/SP33, HO 150-S/SP33, HO 200-S/SP33, HO 250-S/SP33 Current Transducer HO-S/SP33 series I PN = 50, 100, 150, 200, 250 A Ref: HO 50-S/SP33, HO 100-S/SP33, HO 150-S/SP33, HO 200-S/SP33, HO 250-S/SP33 For the electronic measurement of current: DC, AC, pulsed...,

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer IT 700-S ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)

More information

High Performance Current Transducer ITL 900-T = A

High Performance Current Transducer ITL 900-T = A High Performance Current Transducer ITL 900-T For the electronic measurement of currents: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. I PM = 0... 900 A Electrical

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer IT 700-SB ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features ± 10 V voltage output

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer ITN 1000-S ULTRASTAB I PM = 1000 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)

More information

Ref: HLSR 10-SM, HLSR 16-SM, HLSR 20-SM, HLSR 32-SM, HLSR 40-SM, HLSR 50-SM

Ref: HLSR 10-SM, HLSR 16-SM, HLSR 20-SM, HLSR 32-SM, HLSR 40-SM, HLSR 50-SM Current Transducer HLSR-SM series N = 1... 5 A Ref: HLSR 1-SM, HLSR 16-SM, HLSR 2-SM, HLSR 32-SM, HLSR 4-SM, HLSR 5-SM For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current Transducer ITL 4000-S I PN = 4000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. I > 0 P Features Closed

More information

DL2000ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: 1 ppm linearity. MPS for particles accelerators.

DL2000ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: 1 ppm linearity. MPS for particles accelerators. DL000ID Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A Features ppm linearity 6 ppm offset

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)

More information

I P. /dt. di p V S Applications. Standards 1) IEC : 2007; IEC : ) IEC : 2016; IEC : 2017

I P. /dt. di p V S Applications. Standards 1) IEC : 2007; IEC : ) IEC : 2016; IEC : 2017 Ref: ART-B22-D70, ART-B22-D125, ART-B22-D175, ART-B22-D300 Flexible clip-around Rogowski coil for the electronic measurement of AC current with galvanic separation between the primary circuit (power) and

More information

I P. /dt. di p V S+ Applications. Standards. 1) IEC ed1.0: 2007; IEC : ed1.0: 2012

I P. /dt. di p V S+ Applications. Standards. 1) IEC ed1.0: 2007; IEC : ed1.0: 2012 Ref: ART-B22-D70, ART-B22-D125, ART-B22-D175 Flexible clip-around Rogowski coil for the electronic measurement of AC current with galvanic separation between the primary circuit (power) and the secondary

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current transducer ITC 2000-S/SP2 N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated

More information

For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit.

For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit. Voltage transducer DVL 15 V PN = 15 V For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit. Features Bipolar and isolated

More information

AUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS

AUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS AUTOMOTIVE CURRENT TRANSDUCER HCF-SN CLIPS Introduction The HCF CLIPS Family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with galvanic

More information

Active. Advanced Materials The Key to Progress

Active. Advanced Materials The Key to Progress Active Current SEnsors FOR PCB MOUNTING Advanced Materials The Key to Progress The Company VACUUMSCHMELZE VACUUMSCHMELZE GmbH & Co. KG (VAC) is one of the world s leading producers of special metallic

More information

I PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A

I PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A urrent Transducer ITZ 5000-SB FLEX ULTRASTAB I PM = 5000 A For ultra-high precision measurement of current: D, A, pulsed..., with galvanic separation between primary and secondary. Separate magnetic head

More information

For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit.

For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit. Voltage transducer V PN = 1 V Ref: DV 1/SP For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic isolation between the primary and the secondary circuit. Features Bipolar and isolated

More information

AUTOMOTIVE CURRENT SENSOR HC6H300-S

AUTOMOTIVE CURRENT SENSOR HC6H300-S AUTOMOTIVE CURRENT SENSOR HC6H300-S Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive

More information

MAGNETIC INDUCTIVE FLOW SENSORS

MAGNETIC INDUCTIVE FLOW SENSORS JJ Series induq VMM JJ Series induq VMI JJ Series induq VMZ MAGNETIC INDUCTIVE FLOW SENSORS DB_Magnetic_Inductive_Flow_Sensors 7/217 69 Magnetic inductive flow sensors Principle of operation The smart

More information

AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S

AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and

More information

CMS3050 Highly Dynamic MagnetoResistive Current Sensor (I PN

CMS3050 Highly Dynamic MagnetoResistive Current Sensor (I PN Highly Dynamic MagnetoResistive Current Sensor (I PN Data ShEEt The CMS3000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated

More information

Unipolar voltage - Current output 4-20 ma Ref: DVL 50-UI, DVL 150-UI, DVL 250-UI, DVL 500-UI, DVL 750-UI, DVL 1000-UI, DVL 1500-UI

Unipolar voltage - Current output 4-20 ma Ref: DVL 50-UI, DVL 150-UI, DVL 250-UI, DVL 500-UI, DVL 750-UI, DVL 1000-UI, DVL 1500-UI Current Transducer DVL-UI series V PN = 50... 1500 V Unipolar voltage - Current output 4-0 ma Ref: DVL 50-UI, DVL 150-UI, DVL 50-UI, DVL 500-UI, DVL 750-UI, DVL 1000-UI, DVL 1500-UI For the electronic

More information

V P N. Voltage transducer DVM 4200 = 4200 V

V P N. Voltage transducer DVM 4200 = 4200 V Voltage transducer DVM 42 N = 42 V For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated measurement

More information

AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S

AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and

More information

V P N. Voltage transducer DVL 1000 = 1000 V

V P N. Voltage transducer DVL 1000 = 1000 V Voltage transducer DVL 1 V P N = 1 V For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated

More information

MSA500 - Hall effect transducer

MSA500 - Hall effect transducer - Hall effect transducer Datasheet Features Specially designed for railway applications losed loop (compensated) High dielectric strength Precise linearity Precise accuracy High dynamic response No foucault

More information

MSA Hall effect transducer

MSA Hall effect transducer - Hall effect transducer Datasheet Features Specially designed for railway applications losed loop (compensated) High dielectric strength Precise linearity Precise accuracy High dynamic response No foucault

More information

HCD80R1K4E 800V N-Channel Super Junction MOSFET

HCD80R1K4E 800V N-Channel Super Junction MOSFET HCD80R1K4E 800V N-Channel Super Junction MOSFET Features Very Low FOM (R DS(on) X Q g ) Extremely low switching loss Excellent stability and uniformity 100% Avalanche Tested Application Switch Mode Power

More information

HCPL-7840 Isolation Amplifier

HCPL-7840 Isolation Amplifier Products > Optocouplers - Plastic > Plastic Miniature Isolation Amplifier > HCPL-7840 HCPL-7840 Isolation Amplifier Description The HCPL-7840 isolation amplifier family was designed for current sensing

More information

HCD80R650E 800V N-Channel Super Junction MOSFET

HCD80R650E 800V N-Channel Super Junction MOSFET HCD80R650E 800V N-Channel Super Junction MOSFET Features Very Low FOM (R DS(on) X Q g ) Extremely low switching loss Excellent stability and uniformity 100% Avalanche Tested Application Switch Mode Power

More information

HCS80R380R 800V N-Channel Super Junction MOSFET

HCS80R380R 800V N-Channel Super Junction MOSFET HCS8R38R 8V N-Channel Super Junction MOSFET Features Very Low FOM (R DS(on) X Q g ) Extremely low switching loss Excellent stability and uniformity % Avalanche Tested Application Switch Mode Power Supply

More information

ACPL-K49T. Data Sheet

ACPL-K49T. Data Sheet Data Sheet ACPL-K9T Wide Operating Temperature Automotive R Coupler 0-kBd Digital Optocoupler Configurable as Low-Power, Low-Leakage Phototransistor Description The ACPL-K9T is a single-channel, hightemperature,

More information

Ultra Fast NPT - IGBT

Ultra Fast NPT - IGBT APT8GR12JD 12V, 8A, V ce(on) = 2.V Typical Features Ultra Fast NPT - IGBT The Ultra Fast NPT - IGBT family of products is the newest generation of planar IGBTs optimized for outstanding ruggedness and

More information

APT2X21DC60J APT2X20DC60J

APT2X21DC60J APT2X20DC60J APT2X21DC6J ISOTOP SiC Diode Power Module V RRM = 6V I F = 2A @ T C = 1 C 2 Application 2 Uninterruptible Power Supply (UPS) Induction heating Welding equipment High speed rectifiers 1 Features Anti-Parallel

More information

N-Channel Power MOSFET 900V, 4A, 4.0Ω

N-Channel Power MOSFET 900V, 4A, 4.0Ω N-Channel Power MOSFET 900V, 4A, 4.0Ω FEATURES Low R DS(ON) 4Ω (Max.) Low gate charge typical @ 25nC (Typ.) Improve dv/dt capability APPLICATION High efficiency switch mode power Supply Lighting KEY PERFORMANCE

More information

Low Profile, 2.5 A Output Current IGBT and MOSFET Driver

Low Profile, 2.5 A Output Current IGBT and MOSFET Driver Low Profile, 2.5 A Output Current IGBT and MOSFET Driver 22677 DESCRIPTION The consists of an infrared light emitting diode optically coupled to an integrated circuit with a power output stage. This optocoupler

More information

MSV200 - Hall effect transducer

MSV200 - Hall effect transducer - Hall effect transducer Datasheet Features Specially designed for railway applications Closed loop (compensated) High dielectric strength Precise linearity Precise accuracy High dynamic response No foucault

More information

TMC -Converter. Type NG Description 2 Operation 3 Installation 4 Maintenance and Repair

TMC -Converter. Type NG Description 2 Operation 3 Installation 4 Maintenance and Repair Raytheon Anschütz GmbH Postfach 1166 D - 24100 Kiel Germany Tel+49-431-3019-0 Fax+49-431-3019-501 Email Service@raykiel.com www.raytheon -anschuetz.de TMC -Converter NG001 1 Description 2 Operation 3 Installation

More information

AC/DC to Logic Interface Optocouplers Technical Data

AC/DC to Logic Interface Optocouplers Technical Data H AC/DC to Logic Interface Optocouplers Technical Data HCPL-37 HCPL-376 Features Standard (HCPL-37) and Low Input Current (HCPL-376) Versions AC or DC Input Programmable Sense Voltage Hysteresis Logic

More information

CDS4025 MagnetoResistive Current Sensor (I PN

CDS4025 MagnetoResistive Current Sensor (I PN The CDS4000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated galvanic isolation. The MagnetoResistive technology enables

More information

H11F1M, H11F2M, H11F3M Photo FET Optocouplers

H11F1M, H11F2M, H11F3M Photo FET Optocouplers , H11F2M, H11F3M Photo FET Optocouplers Features As a remote variable resistor: 100Ω to 300MΩ 15pF shunt capacitance 100GΩ I/O isolation resistance As an analog switch: Extremely low offset voltage 60

More information

I P I OUT R L. Applications. Standards. N 52.D ; Page 1/8

I P I OUT R L. Applications. Standards. N 52.D ; Page 1/8 Ref: ATO-10-B225-D10/SP3 r = 10 A ATO series is a split core current transformer for the electronic measurement of AC waveform current with galvanic separation between the primary circuit (power) and the

More information

Current clamps for AC current

Current clamps for AC current Current clamps for AC current Y series The Y series clamps are designed to be both rugged and versatile whilst remaining easy to use. The jaws are designed so that the clamps can be hooked onto cables

More information

ACPL-P480 and ACPL-W480

ACPL-P480 and ACPL-W480 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Description The high-speed ACPL-P48/W48 optocoupler contains a GaAsP LED, a photo detector, and a Schmitt trigger that eliminates

More information

Optocoupler, Phototransistor Output, High Temperature

Optocoupler, Phototransistor Output, High Temperature Optocoupler, Phototransistor Output, High Temperature 1791823 DESCRIPTION The consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4 pin plastic dual inline

More information

HGTG12N60A4D, HGTP12N60A4D, HGT1S12N60A4DS

HGTG12N60A4D, HGTP12N60A4D, HGT1S12N60A4DS HGTGN6AD, HGTPN6AD, HGT1SN6ADS Data Sheet December 21 6V, SMPS Series N-Channel IGBT with Anti-Parallel Hyperfast Diode The HGTGN6AD, HGTPN6AD and HGT1SN6ADS are MOS gated high voltage switching devices

More information

Technical catalogue. Current sensors Voltage sensors

Technical catalogue. Current sensors Voltage sensors Technical catalogue Current sensors Voltage sensors Current sensors Voltage sensors Contents Technologies Current measuring technology... 4 Voltage measuring technology... 8 Voltage detection technology...

More information

Ripple & Max. capacitive Output Current

Ripple & Max. capacitive Output Current 0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.

More information

2.5 A Output Current IGBT and MOSFET Driver

2.5 A Output Current IGBT and MOSFET Driver VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for

More information

High IMR, Low Cost ISOLATION AMPLIFIER

High IMR, Low Cost ISOLATION AMPLIFIER 49% FPO ISO High IMR, Low Cost ISOLATION AMPLIFIER FEATURES HIGH ISOLATION-MODE REJECTION: kv/µs (min) LARGE SIGNAL BANDWIDTH: 85kHz (typ) DIFFERENTIAL INPUT/DIFFERENTIAL OUTPUT VOLTAGE OFFSET DRIFT vs

More information

SCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A

SCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A VSVSK.23..PbF Series SCR / SCR and SCR / Diode (MAGNAPAK Power Modules), 23 A PRODUCT SUMMARY I T(AV) 23 A Type Modules thyristor, standard Package MAGNAPAK Circuit configuration MAGNAPAK Two SCRs doubler

More information

5 years! Modular Housings. VariTrans P Warranty

5 years! Modular Housings. VariTrans P Warranty Modular Housings VariTrans P 27000 The Multimeter among the isolators. With 480 switchable calibrated ranges and broad-range power supply. The Task A wide range of measuring signals need to be galvanically

More information

IGBT Module H Bridge MIEB 101H1200EH. = 1200 V = 183 A V CE(sat) = 1.8 V V CES I C25. Part name (Marking on product) MIEB101H1200EH

IGBT Module H Bridge MIEB 101H1200EH. = 1200 V = 183 A V CE(sat) = 1.8 V V CES I C25. Part name (Marking on product) MIEB101H1200EH MIEB 11HEH IGBT Module H Bridge S 25 = = 183 (sat) = 1.8 Part name (Marking on product) MIEB11HEH 13, 21 1 T1 D1 9 T2 D2 2 1 19 E72873 3 T3 D3 11 T D 1, 2 Features: SPT + IGBT technology low saturation

More information

Current Sensor: ACS754SCB-200

Current Sensor: ACS754SCB-200 Pin 1: VCC Pin 2: GND Pin 3: VOUT Terminal 4: IP+ Terminal 5: IP AB SO LUTE MAX I MUM RAT INGS Supply Voltage, V CC...16 V Reverse Supply Voltage, V RCC... 16 V Output Voltage, V OUT...16 V Reverse Output

More information

Developing Software for the A350 XWB Slat Flap Control Computer with SCADE

Developing Software for the A350 XWB Slat Flap Control Computer with SCADE SCADE User Group Conference, 15.10.2015 Developing Software for the A350 XWB Slat Flap Control Computer with SCADE Paul Linder, Diehl Aerospace A Joint Diehl Thales Company www.diehl-aerospace.com Overview

More information

Preliminary Data Sheet

Preliminary Data Sheet 2SP0320T2Cx-12 Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE -2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter

More information

CYHCS-RC2S Split Core Hall Effect DC Current Sensor

CYHCS-RC2S Split Core Hall Effect DC Current Sensor Current Sensors CYHCS-RC2S Split Core Hall Effect DC Current Sensor This Hall Effect current sensor can be used for measurement of DC and AC current, pulsed currents etc. The output of the transducer reflects

More information

Ultra Fast NPT - IGBT

Ultra Fast NPT - IGBT APTGRBD APTGRB_SD APTGRSD V, A, V ce(on) =.V Typical Ultra Fast NPT - IGBT (B) The Ultra Fast NPT - IGBT family of products is the newest generation of planar IGBTs optimized for outstanding ruggedness

More information

2SD106AI-17 UL Dual SCALE Driver Core

2SD106AI-17 UL Dual SCALE Driver Core 2SD106AI-17 UL Dual SCALE Driver Core for IGBTs and Power MOSFETs Description The SCALE drivers from CONCEPT are based on a chip set that was developed specifically for the reliable driving and safe operation

More information

ACNT-H79A, ACNT-H790 Optical Isolation Amplifier in 14.2mm Stretched SO-8 Package. Features. Applications

ACNT-H79A, ACNT-H790 Optical Isolation Amplifier in 14.2mm Stretched SO-8 Package. Features. Applications ACNT-H79A, ACNT-H790 Optical Isolation Amplifier in 14.2mm Stretched SO-8 Package Data Sheet Description The ACNT-H79A and ACNT-H790 isolation amplifiers are designed for current and voltage sensing in

More information

3~ Rectifier Bridge, half-controlled (high-side) + free wheeling Diode 10/11 19/20 21/22. Features / Advantages: Applications: Package: E2-Pack

3~ Rectifier Bridge, half-controlled (high-side) + free wheeling Diode 10/11 19/20 21/22. Features / Advantages: Applications: Package: E2-Pack MCM2UJ8ED hyristor Module 3~ ectifier M 8 2 D FSM 5 3~ ectifier Bridge, half-controlled (high-side) + free wheeling Diode Part number MCM2UJ8ED Backside: isolated 7 5 2 / 8 6 3 9/2 2/3 4/5 6/7 2/22 Pin

More information

ASSR-601JV, ASSR-601JT

ASSR-601JV, ASSR-601JT Automotive Solid State Relay with R 2 Coupler TM Isolation Description The ASSR-61JV/JT is a high-voltage solid state relay that is designed for automotive applications. ASSR-61JV/JT consists of an AlGaAs

More information

LED Driver Compact fixed output 4,5 83,5 93. Ordering data. Type

LED Driver Compact fixed output 4,5 83,5 93. Ordering data. Type Product description Fixed output built-in LED Driver Constant current LED Driver Output current 30, 00 or 700 ma Max. output power 20 W Nominal life-time up to 0,000 h For luminaires of protection class

More information

Industrial Controls. Catalog IC SIRIUS. Answers for industry.

Industrial Controls. Catalog IC SIRIUS. Answers for industry. Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor

More information

Current clamps for AC current

Current clamps for AC current Current clamps for AC current Small, compact and particularly resistant, this range of miniature clamps is designed for measurements from a few milli-amperes to 150 A AC. Their shape makes them very practical

More information

V DSS = 1200V R DSon = 17mΩ Tj = 25 C I D = Tc = 25 C

V DSS = 1200V R DSon = 17mΩ Tj = 25 C I D = Tc = 25 C APTMC12AM2CT1AG Phase leg SiC MOSFET Power Module V DSS = 12V R DSon = 17mΩ max @ Tj = 25 C I D = 143A @ Tc = 25 C Application Welding converters Switched Mode Power Supplies Uninterruptible Power Supplies

More information

Raytheon Marine GmbH. Operator Manual

Raytheon Marine GmbH. Operator Manual Raytheon Marine GmbH eáöüpé~ëmêççìåíë mçëíñ~åünnss ajoqnmmháéä déêã~åó qéähqvjqpnjpmnvjm c~ñhqvjqpnjpmnvjovn bã~áäpéêîáåé]ê~óâáéäkåçã ïïïkê~óíüéçåjã~êáåékåçã Operator Manual 349/1--43.DOC11 Feb. 27. 21

More information

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 23. V/ns T J. mj I AR

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 23. V/ns T J. mj I AR IRF36SPbF Applications l High Efficiency Synchronous Rectification in SMPS l Uninterruptible Power Supply l High Speed Power Switching l Hard Switched and High Frequency Circuits Benefits l Improved Gate,

More information

Schematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1).

Schematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1). CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Technical Data HCPL-7601 HCPL-7611 Features Low Input Current Version of HCPL-2601/11 and 6N137 Wide Input Current Range: I F =

More information

LED Driver Compact dimming

LED Driver Compact dimming Driver LCAI 35W 3mA 900mA ECO C flat ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 3 900 ma Max. output power 35 W Nominal

More information

MINI-PS AC/24DC/1.3

MINI-PS AC/24DC/1.3 Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics

More information

ACPL-C87AT/ACPL-C87BT Automotive High Precision DC Voltage Isolation Sensor. Features. Applications

ACPL-C87AT/ACPL-C87BT Automotive High Precision DC Voltage Isolation Sensor. Features. Applications ACPL-CAT/ACPL-CBT Automotive High Precision DC Voltage Isolation Sensor Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description

More information

QME48T40 DC-DC Series Data Sheet VDC Input; A Output

QME48T40 DC-DC Series Data Sheet VDC Input; A Output Applications Telecommunications Data communications Wireless communications Servers, Workstations Benefits High efficiency no heat sink required Higher current capability at 70 ºC than most competitors

More information

For non-electrical quantities

For non-electrical quantities Controlgear 3UG3 monitoring relays 3RS17 interface converters N nsb0346h nsb0348h nsb0775h For electrical quantities For non-electrical quantities 3RS17 interface converter Selection and ordering data

More information

LED Driver Compact fixed output

LED Driver Compact fixed output Driver LC 5/3/35/4W 6/7/8/9mA fixc C ADV ADVANCED series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 6, 7, 8 or 9 ma Max. output power 6.5, 31, 36 or

More information

62.22 Copper side view

62.22 Copper side view 62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,

More information

Optocoupler, Phototransistor Output, Very High Isolation Voltage

Optocoupler, Phototransistor Output, Very High Isolation Voltage Optocoupler, Phototransistor Output, Very High Isolation Voltage CNY64ST Top View A C FEATURES Rated recurring peak voltage (repetitive) V IORM = 145 V peak Thickness through insulation 3 mm CNY65ST Creepage

More information

ASSR-3210, ASSR-3211, ASSR-3220 General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10Ω) Features

ASSR-3210, ASSR-3211, ASSR-3220 General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10Ω) Features ASSR-0, ASSR-, ASSR-0 General Purpose, Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free

More information

Isolation Amplifier. Technical Data HCPL-7800A HCPL-7800

Isolation Amplifier. Technical Data HCPL-7800A HCPL-7800 Isolation Amplifier Technical Data HCPL-800A HCPL-800 Features 15 kv/µs Common-Mode Rejection at V CM = 1000 V Compact, Auto-Insertable Standard 8-pin DIP Package 0.00025 V/V/ C Gain Drift vs. Temperature

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, 11 C Rated 17918-2 DESCRIPTION The 11 C rated (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage.

More information

AUTOMOTIVE CURRENT TRANSDUCER HAB 60-S/SP5

AUTOMOTIVE CURRENT TRANSDUCER HAB 60-S/SP5 AUOMOIVE CURREN RANSDUCER HAB 60-S/SP5 Introduction he HAB Family is best suited for DC, AC or pulsed currents measurement in high power and low voltage automotive applications. It s contains galvanic

More information

Assembly. Front view. Switch Power Rail

Assembly. Front view. Switch Power Rail Switch Amplifier Features Assembly 1-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR input 2 passive transistor outputs (resistive acc. to EN 60947-5-6) Line fault transparency

More information

Fluxgate system / Voltage-output type F03P***S05 SERIES

Fluxgate system / Voltage-output type F03P***S05 SERIES Fluxgate system / Voltage-output type F03P***S05 SERIES rev A / May 2013 ABSOLUTE MAXIMUM RATGS Parameters Symbol Unit Value Comment Supply voltage Primary conductor temperature Non repetitive primary

More information

N-Channel Power MOSFET 600V, 11A, 0.38Ω

N-Channel Power MOSFET 600V, 11A, 0.38Ω N-Channel Power MOSFET 600V, 11A, 0.38Ω FEATURES Super-Junction technology High performance due to small figure-of-merit High ruggedness performance High commutation performance Pb-free plating Compliant

More information