COUNTIS and DIRIS systems CONTROL AND ENERGY MANAGEMENT FOR ELECTRICAL NETWORK INSTALLATIONS

Transcription

1 COUNTIS and DIRIS systems CONTROL AND ENERGY MANAGEMENT FOR ELECTRICAL NETWORK INSTALLATIONS SOCOMEC GROUP SWITCHING PROTECTION & UPS Industrial Switching & Protection Systems

2 COUNTIS and DIRIS systems: control and transparency Users want to optimise the operation of their electrical networks and to do this they need to measure and monitor the network parameters, meter and manage energy consumption and events, analyse the harmonics, have remote control of equipment and above all communicate with the different components in their installation. Socomec is the European leader in energy control and management and develops, produces and markets products and software which can perform these functions. The adaptable solutions DEDICATED MONITORING The COUNTIS and DIRIS systems can be operated remotely using CONTROL VISION software to: centralise and display all electrical values, centralise and display all energy meter readings (electricity, water and gas) centrally, historical trend analysis of measured values, manage alarm logs, manage consumption logs. Display showing numerical values or indicators for all electrical values. All DIRIS equipment can display tables of energy consumption (electricity, water, gas) or pulses counted. The range is one of the most comprehensive on the market, and consists of two complementary systems: COUNTIS system: for energy metering Energy metering has become an essential function because of environmental legislation, the opening up of the electricity market and the need to manage energy consumption to keep down manufacturing and operating costs. The COUNTIS system consists of electrical energy meters for use on all types of network and a pulse concentrator so data can be sent to a remote central PC or other system for centralised energy management (electricity, water, gas, etc.). DIRIS system: made to measure Electrical installations are becoming more and more complex while at the same time maintenance times are becoming tighter and the resources allocated to maintenance more and more limited DIRIS is a complete system developed by SOCOMEC over the last 10 years, consisting of products and software to control the operation of all electrical networks, and offering: measurement and monitoring of electrical values, energy metering and management (electricity, water and gas), remote control and command of equipment, network protection. Now thousands of users, systems integrators, electrical panel builders and operators are optimising the costs and service of their installations by using the innovative DIRIS system. 3rd order to 25th order harmonics displayed in table form or as bar charts. All electrical values permanently scanned by DIRIS are stored in the data base in a table which can be displayed for a selected time period. Every DIRIS present on the network can be viewed in the form of a table showing all electrical values.

3 Control your energy distribution with the COUNTIS and DIRIS systems Operators of electrical installations need to identify large consumers, analyse networks and diagnose faults so that they can be corrected. Operating costs can be controlled by: optimising the energy supply contract, reducing maintenance costs, reducing production losses, improving the installation's performance. Socomec has been developing the COUNTIS and DIRIS systems for more than 10 years to provide innovative solutions for metering, measurement and control for electrical installation management. CMv2 AM10 A40 AM10 ATiv2 Am M A20 Water, gas, air Ci ATiv2 ATPv2 PLC BMS CONTROL VISION

4 COUNTIS system Selection guide APPLICATIONS Energy centralisation Metering for single-phase networks AMd / AMt COUNTIS COUNTIS Adc COUNTIS COUNTIS COUNTIS COUNTIS AM10 AMd/AMt ATv2/ATiv2 ATd ATpv2 Ci Metering for LV three-phase networks Metering for 48 VAC networks Dual tarif AMd ATiv2 FUNCTIONS DEVICE BODY Modules x 96 DISPLAY LCD (7 digits) LCD (6 digits) NETWORK 48 V DC Adc Single-phase AMd / AMt Two-phase 2 FE Three-phase 3, 4 FE or FNE (BT) INPUTS Current - shunt 70 or 100 mv Adc - direct up to 32 A AMd - direct up to 80 A - via TC 5 A AMt VOLTAGE - 48 V DC - 6 to + 20 % Adc V AC ± 20 % AMd /AMt % to 400 V AC + 20 % V AC ± 15 % - up to % to 400 V AC + 30 % ON / OFF INPUTS ACCURACY Class 1 (IEC ) AMd / AMt Class 5 Adc PULSE OUTPUTS (REED RELAYS) 1 (100 Wh) 1 configurable 1 (1 kwh) DATA STORAGE Totals (kwh or pulses) Monthly (kwh) Average 10-minute power demand over 8 days (4 inputs) Adc 7 IM CODE (tool developed by GIMELEC) IM100 IM100 IM100 IM100 IM100 /

5 DIRIS system Selection guide APPLICATIONS DIRIS DIRIS DIRIS Am A20 A40/ A41 Multi-measurement & metering Harmonics analysis Monitoring parameters Energy management Control / command Communication FUNCTIONS MEASUREMENT 3U, 3V, 3I, In, 3P, ± SP, 3Q, ± ΣQ, 3S, ΣS, 3PF, ΣPF L/C and F Neutral measurement via CT A41 3U, 3V, 3I, In, ΣP, ΣQ, ΣS, ΣPF L/C and F Average and maximum values integrated 3I, In, 3U, 3V, F, ± ΣP, ± ΣQ et ΣS Maximum values integrated 3I, In, + ΣP Data storage min & max instantaneous values 3U, 3I, In, ± ΣP, ± ΣQ, ΣS, ΣPF, F, thd 3I, thd In, thd 3U, thd 3V with date and time METERING Hours run ± kwh, ± kvarh and kvah kwh and kvarh Programmable pulse outputs 2 () 1 () 2 () External pulse metering inputs ACCURACY Class 0.5 S IEC Class 1 IEC Class 2 IEC HARMONICS thd 3I, In, 3U and 3V up to harmonics 51 Storing of P+, P-, Q+ and Q- with a programmable synchronisation top up 5 to 60 minutes MONITORING Relays for: 3I, 3U, 3V, In, ± SP, ± SQ, SS, F, SPF L/C thd 3I, thd In, thd 3V, thd 3U and hours run Storage of latest alarms with date and time (10) Storage of voltage sags, swells and outages with date and time CONTROL / COMMAND Position control and operation metering inputs Remote control outputs COMMUNICATION Programmable analogue outputs 2 to 4 () by JBUS /MODBUS by PROFIBUS DP IM CODE (tool developed by GIMELEC) * Consult us. IM 110 à IM 610* IM 110 à IM 210* IM 110 à IM 774*