BLADE(BP) Series Amplifiers BP BP BP BP BP BP BP BP BP BP BP BP BP

Size: px

Start display at page:

Download "BLADE(BP) Series Amplifiers BP BP BP BP BP BP BP BP BP BP BP BP BP"

Cornelia Park
5 years ago
Views:

1 BLADE() Series Amplifiers

2 BLADE() BLADE() 1

3 1 Ohm Stable Design (Mono Amps , ) 2 OHM STABLE DESIGN (CLASS A/B FULL RANGE MONO AMPS-600.1, ) 2 OHM STABLE DESIGN (CLASS D FULL RANGE MONO AMPS , , ) Dual cooling fans for temperature control (4000.1, , ) 2

4 3 is 9V to 200mv(250mV). This is NOT a volume control!

5 16. NO Indicator Indicator the amplifier is grounded, and receiving +12V and REM power. 17. CLIP Indicator(4000.1,6000.1,8000.1) This LED indicates when clipping is present while playing source material. If the CLIP LED is flashing it also indicates the clip limiter is engaging. At this point it is suggested to adjust the amplifiers gain level until the CLIP LED is only flashing on peak bass notes. The clip limiter protection can be overdriven resulting in possible damage to your speakers and/or the amplifier. 18. Dual Internal Cooling Fans(4000.1,6000.1,8000.1) When the device is running, the fan starts to run at a speed of 3500 per second when the device surface temperature reaches 50 degrees. If the device temperature reaches 80 degrees, inside of the thermal protection starts automatically, the device will stop working. But, the fan will still keep the same running speed for the device cooling. 4

6 Fig 1. 2-ch amplifier panel layout 500.2/1000.2/ Fig 2. Mono amplifier panel layout 600.1/

7 Fig 2. Mono amplifier panel layout / /6000.1/ BANDPASS HPF LPF BASS BOOST FREQ LEVEL REMOTE GAIN 2 MINIMUM 20 50Hz 50 16KHz 0DB 12DB Hz 9V 0.25V 6

8 Fig 3. 4-CH amplifier panel layout 800.4/ Fig 4. 5-ch amplifier panel layout

9 Fig 5. Mono amplifier Wiring 600.1/ OHM MINIMUM / OHM MINIMUM 8

10 Fig 6. Mono Amplifier Wiring 600.1/ OHM MINIMUM / OHM MINIMUM *Subwoofer loads cannot be less than the minimum stable impedance rated in this manual. The two negative and positive speaker terminanls are wired internally. Only one neagative and one positive terminalis required when wiring to bp mono amplifiers. 9

11 Fig 7. Mono amplifier Wiring /6000.1/ BANDPASS HPF LPF BASS BOOST FREQ LEVEL REMOTE GAIN 2 MINIMUM 20 50Hz 50 16KHz 0DB 12DB Hz 9V 0.25V 2 OHM MINIMUM 10

12 Fig /1000.2/ Amplifier Wiring (1-CHANNEL MODE) 4 OHM Fig /1000.2/ Amplifier Wiring (2-CHANNEL MODE) 4 OHM 4 OHM 11

13 Fig / Amplifier Wiring (3-CHANNEL MODE) 2OHM-4 OHM 2OHM-4 OHM Fig / Amplifier Wiring (4-CHANNEL MODE) 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 12

14 Fig Amplifier Wiring (4-CHANNEL MODE) 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 2OHM-4 OHM 4 OHM TO 8OHM 4 OHM TO 8OHM 13

15 14

16 W X 2 500W X 2 750W X 2 200W X 4 600W X W X W X W X 1 80W X 2 160W X 2 240W X 2 60W X 4 150W X 1 300W X 1 500W X W X 1 160W X 2 240W X 2 480W X 2 120W X 4 300W X 1 500W X 1 900W X W X 1 600W X W X 1 320W X 1 640W X 1 960W X 1 240W X 2 15Hz-30KHz 15Hz-30KHz 15Hz-30KHz 10Hz-35KHz 10Hz-35KHz 15Hz-30KHz 15Hz-30KHz 15Hz-250Hz 15Hz-250Hz 20Hz-16KHz 0.25~9.0V >90dB >90dB >90dB >95dB >95dB >60dB <0.10% <0.10% <0.10% <0.10% <0.05% <0.10% <0.10% <0.10% <0.10% <2.5% 50Hz-260Hz 50Hz-260Hz 50Hz-260Hz 80Hz-3KHz 80Hz-3KHz 50Hz-750Hz 50Hz-750Hz 80Hz-250Hz 80Hz-250Hz 50Hz-16KHz Full-3KHz Full-3KHz Full-3KHz Full-3KHz Full-3KHz 20Hz-50Hz 20Hz-50Hz 20Hz-50Hz 0-6db/12dB 0-6db/12dB 0-6db/12dB 0-6db/12dB 0-6db/12dB 0-6db/12dB 0-6db/12dB 0-6db/12dB @45Hz (50Hz-750Hz) 2 0hm Stereo 2 0hm Stereo 2 0hm Stereo 2 0hm Stereo 2 0hm Stereo 2 0hm Mono 2 0hm Mono 1 0hm Mono 1 0hm Mono 2 0hm Mono 25A x 1 45A x 1 35A x 2 25A x 2 30A x 2 15A x 2 25A x 2 25A x 2 40A x 2 External (150A) 200X51X x51x x51x X51X x51x X51X X51X X51X X51X X55X X2.0X x2.0x x2.0x X2.0X x2.0x X2.0X X2.0X X2.0X X2.0X X2.2X W X W X W X 1 20Hz-16KHz 0.25~9.0V >60dB <2.5% 50Hz-16KHz 20Hz-50Hz 0-12dB@ (50Hz-750Hz) 2 0hm Mono External (250A) 321X55X X2.2X W X W X W X 1 20Hz-16KHz 0.25~9.0V >60dB <2.5% 50Hz-16KHz 20Hz-50Hz 0-12dB@ (50Hz-750Hz) CHANNELS PEAK OUTPUT POWER@14.4V Low Pass Cross Frequency High Pass Cross Frequency 2 0hm Mono External (350A) 721X55X X2.2X Wx4+500W 80Wx4+200Wx1 160Wx4+500Wx1 N/A+N/A 320Wx2+200Wx1 15Hz-30KHz <0.10% 50Hz-3KHz(CH3&4) 80Hz-150Hz(CH5) 10Hz-300Hz(CH1&2) 10Hz-500Hz(CH3&4) 15Hz-55Hz 20hm Stereo +2Ohm Mono 25A x 3 380X51X X2.0X7.1 15

17 16

360mm (14-3/16 ) x 224mm (8-13/16 ) x 67mm (2-5/8 )

EN-41400 (4 Channel) EN-21200 (2 Channel) Class Class-AB Class-AB Power 1400 Watts 1200 Watts Frequency Response 10Hz - 42kHz 10Hz - 45kHz Dimensions 360mm (14-3/16 ) x 224mm (8-13/16 ) x 67mm (2-5/8 )