SUBMITTAL MACH-ProWebSys

Transcription

1 Publish your building automation system to the Web quickly and easily with the Reliable Controls MACH-ProWeb, a fully programmable BACnet Building Controller (B-BC) with a builtin Web server and operator interface. The MACH-ProWeb is designed to meet and exceed the requirements of a BACnet Operator Workstation (B-OWS). The provides high speed 10/100 Ethernet, SMART- Net communications, 12 inputs and 8 outputs, and protocol support for BACnet, RCP, and Modbus RTU and TCP (both master and slave). Additional points are added to the using convenient MACH- ProPoint expansion modules. Up to 7 MACH- ProPoint expansion modules can be added to each controller. D I M E N S I O N S T E C H N I C A L S P E C I F I C A T I O N S Processor 100 MHz, high-performance, 32-bit embedded microcontroller Memory 8 MB operating RAM 1 MB non-volitile RAM (trends and dynamic values) 128 MB Flash EEPROM operating system, database, JavaScript, graphics, and controller configuration Supply Voltages 24 VAC/VDC ±10% 75 VA max. Communications IEEE Ethernet 10/100 BaseT kbps max kbps max. PC or modem SMART-Net 16 sensors max. Browser Support IE 8, Firefox 3, Chrome 5, or greater JavaScript must be enabled on client Flash required for animations and flood fill Universal Inputs 12 universal inputs 12-bit ADC Analog: 0 5 VDC, 0 10 VDC 4 20 ma, thermistor Digital: dry contact Impedance: 1 M W for 0 5 VDC range 1 M W for 0 10 VDC range 250 W for 4 20 ma range 20 kw pull-up for thermistor/ dry contact range 150 Hz pulse counting (supports flow meters) 24 VAC over-voltage protection 8 Outputs 12-bit ADC First four outputs are socketed to accommodate relay, TRIAC, or universal modules (output modules sold separately) Analog: 0 12 VDC Digital: 0 12 VDC Manual ON provides adjustable 0 12 VDC (HOA only) LED indicator (glows proportionally) Output power: VDC 24 VAC over-voltage and short protection Expansion Modules Up to 7 MACH-ProPoint expansion modules Peripheral Power Onboard variable VDC power supply providing up to 200 ma of DC power to peripheral devices (If powered with 24VDC, the maximum voltage output is 22VDC) Real-Time Clock ±1 second per day Memory/RTC Backup 72 hour backup 10 years for database Dimensions 25.4 cm L x 13.7 cm W x 3.9 cm H (10 L x 5 3 /8 W x 1 1 /2 H) Mounting #8 clearance holes on 23.0 cm L x 11.0 cm W (9 1 /16 L x 4 5 /16 W) Screw depth 25 mm (1 ) Weight 1.3 kg (2.7 lb) Ambient Limits Operating: -20 C to 55 o C (-4 F to 131 o F) Shipping: -40 C to 60 C (-40 F to 140 F) Humidity: 10% to 90% RH non-condensing P r o j e c t : Engineer: Approved by: MPWS-03/01/12-RAR 2012 Reliable Controls Corporation 1/6

2 P R O D U C T F E A T U R E S Protocol BACnet - B/IP x 2, Ethernet, MS/TP and PTP HTTP - Hyper Text Transfer Protocol Reliable Controls Protocol - Backward compatibility with previous generation systems Modbus - Supports both RTU and TCP in both master and slave configurations SMTP - Provides standard communications for broadcasting alarms SMS - GSM/GPRS modem SNMP - Simple Network Management Protocol 12 Inputs Universal ranges Expandable using MACH-ProPoint expansion modules Maximum possible inputs of Outputs Outputs 1 4 are wired to unpopulated sockets Outputs 5 8 are universal (no sockets) Expandable outputs using MACH-ProPoint expansion modules Maximum possible outputs of Variables Selectable standard and custom ranges, as well as fixed program-driven values 64 PID Loops Standard P, PI, or PID controllers for closed loop control BACnet loops supported 32 Weekly Schedules 4 On/Off times for each weekday and 2 override days BACnet schedules supported 8 Annual Schedules Days of the year designated as holidays BACnet calendar supported 20 Custom Tables For creating custom scaling functions 64 System Groups Allows related points to be grouped on to one display 160 points/group 128 Control-BASIC Programs User programmable control strategy in a readable, BASIC-like language 3200 bytes per program 96 Trend Logs Each Trend Log stores 512 samples and up to 6 points Values recorded at user defined intervals BACnet Trend Logs supported 128 Runtime Logs Totals the On time and records the On/Off times of a digital point Holds 200 events 128 User Passwords Protects access to system Each user is assigned a user name and an access level 16 Custom Units 8 analog engineering units 8 digital engineering units SMART-Net Port Networks up to 16 SMART-Sensors Real-Time Clock Warranty 5 years Certification BTL Listed (B-OWS) BTL Listed (B-BC) ISO UL 916 Listed FCC CFR 47 Part 15/B CE O R D E R I N G MPW-S controller/web server MPW-S-H with HOA (Hand/Off/Auto) switches and pot adjust MPP-IO MACH-ProPoint I/O expansion module with 12 universal inputs and 8 outputs MPP-IO-H MPP-IO with HOA (Hand/Off/Auto) switches and pot adjust MPP-IO-DL Door lid decal kit for MP-S, MP-S-H, MPW-S, MPW-S-H, MPP-IO, and MPP-IO-H MPP-I MPP Input expansion module with 24 universal inputs MP-I-DL Door lid decal kit for MPP-I RM Relay output module (package of 10) TM TRIAC output module (package of 10) UM Universal output module (package of 10) 2/6

3 Enclosure 1 Enclosure 2 Power Wiring MACH-Zone Neutral of 24 VAC connected to Earth ground GND 24 VAC Transformer 120 VAC GND 24 VAC Transformer 120 VAC Network Wiring Controller 1 Controller 2 Controller 3 EOL switches in EOL switches out EOL switches in Shield Shield Shield Ground Network shields connected with marrette Expansion Module Wiring Maximum possible inputs of 128 Maximum possible outputs of 64 Maximum total I/O of 160 per controller 3/6

4 B A C n e t P r o t o c o l I m p l e m e n t a t i o n C o n f o r m a n c e S t a t e m e n t Supported BIBBs Model # Product Name MPWS * * Protocol Revision , Firmware Version 7.40 BACnet Standard Device Profile Product Segmentation Capability Device Profile BACnet Building Controller (B-BC) BACnet Operator Workstation (B-OWS) Segmentation Type Supported Window Size Able to transmit segmented messages Yes 1 Able to receive segmented messages Yes 1 Data Link Layer Options Data Link Ethernet (ISO ) BACnet/IP x 2 Options MS/TP Master 9600, 19200, 38400, Point-To-Point 9600, 19200, 38400, 57600, Supported BIBBs DS-RP-A DS-RP-B DS-RPM-A DS-RPM-B DS-WP-A DS-WPM-A DS-WP-B DS-WPM-B DS-V-A DS-M-A DS-COV-A DS-COV-B DS-COVU-A DS-COVU-B AE-N-A AE-N-I-B AE-ACK-A AE-ACK-B AE-ASUM-B AE-ESUM-B AE-INFO-B AE-AS-A AE-VM-A AE-VN-A SCHED-VM-A BIBB Name Data Sharing-ReadProperty-A Data Sharing-ReadProperty-B Data Sharing-ReadProperyMultiple-A Data Sharing-ReadProperyMultiple-B Data Sharing-WriteProperty-A Data-Sharing-WritePropertyMultiple-A Data Sharing-WriteProperty-B Data Sharing-WriteProperyMultiple-B Data-Sharing-View-A Data-Sharing-Modify-A Data Sharing-COV-A Data Sharing-COV-B Data Sharing-COV-Unsolicited-A Data Sharing-COV-Unsolicited-B Alarm and Event-Notification-A Alarm and Event-Notification Internal-B Alarm and Event-ACK-A Alarm and Event-ACK-B Alarm and Event-Alarm Summary-B Alarm and Event-Enrollment Summary-B Alarm and Event-Information-B Alarm and Event Management-Alarm Summary View-A Alarm and Event Management-View and Modify-A Alarm and Event-View Notification-A Schedule-View and Modify-A Device Address Binding Static Binding Supported No SCHED-I-B SCHED-E-B T-V-A Scheduling-Internal-B Scheduling-External-B Trending-View-A T-VMT-I-B Trending-Viewing and Modifying Trends Internal-B Broadcast Capability BACnet/IP Broadcast Management Device (BBMD) Yes, supports registration by foreign devices. T-VMT-E-B T-ATR-B T-VMMV-I-B T-VMMV-E-B T-AMVR-B Trending-Viewing and Modifying Trends External-B Trending-Automated Trend Retrieval-B Trending-Viewing and Modifying Multiple Value Internal-B Trending-Viewing and Modifying Multiple Value External-B Trending-Automated Multiple Value Retrieval-B Networking Options Router Options DM-DDB-A DM-DDB-B DM-DOB-B Device Management- Device Binding-A Device Management- Device Binding-B Device Management- Object Binding-B BACnet/IP1 <-> BACnet/IP2 BACnet/IP2 <-> MS/TP-Net DM-DCC-B Device Management-Device Communication Control-B BACnet/IP1 <-> Ethernet BACnet/IP2 <-> PTP DM-MTS-A Device Management-Manual Time Synchronization-A BACnet/IP1 <-> MS/TP-Net BACnet/IP1 <-> PTP BACnet/IP2 <-> Ethernet Ethernet <-> MS/TP-Net Ethernet <-> PTP MS/TP-Net <-> PTP DM-TS-A DM-TS-B DM-UTC-A DM-UTC-B Device Management-Time Synchronization-A Device Management-Time Synchronization-B Device Management-UTCTimeSynchronization-A Device Management-UTCTimeSynchronization-B Character Sets Character Sets Supported ANSI X3.4 DM-RD-B DM-BR-B DM-OCD-B NM-RC-B Device Management-Reinitialize Device-B Device Management-Backup and Restore-B Device Management-Object Creation and Deletion-B Network Management-Router Configuration-B 4/6

5 B A C n e t P r o t o c o l I m p l e m e n t a t i o n C o n f o r m a n c e S t a t e m e n t Supported Standard Object Types Object Type Creation Deletion Analog Input Yes Yes Description, Reliability, Time_Delay, Notification_Class, High_Limit, Low_Limit, Deadband, Limit_Enable, Notify_Type, Event_Time_ Stamps, COV_Increment Analog Output Yes Yes Description, Reliability, Time_Delay, Notification_Class, High_Limit, Low_Limit, Deadband, Limit_Enable, Notify_Type, Event_Time_ Stamps, COV_Increment Analog Value Yes Yes Description, Reliability, Time_Delay, Notification_Class, High_Limit, Low_Limit, Deadband, Limit_Enable, Notify_Type, Event_ Time_Stamps, COV_Increment, Relinquish_Default, Priority_Array Binary Input Yes Yes Description, Reliability, Active_Text, Inactive_Text, Change_Of_State_Time, Change_ Of_State_Count, Time_Of_State_ Count_Reset, Elapsed_Active_ Time, Time_Of_Active_Time_Reset, Alarm_Value, Binary Output Yes Yes Description, Reliability, Active_Text, Inactive_Text, Change_Of_State_Time, Change_ Of_State_Count, Time_Of_State_ Count_Reset, Elapsed_Active_ Time, Time_Of_Active_Time_Reset, Minimum_On_Time, Minimum_Off_ Time, Feedback_Value, Binary Value Yes Yes Description, Reliability, Active_Text, Inactive_Text, Change_Of_State_Time, Change_ Of_State_Count, Time_Of_State_ Count_Reset, Elapsed_Active_ Time, Time_Of_Active_Time_Reset, Minimum_On_Time, Minimum_Off_ Time, Alarm_Value, Relinquish_Default, Priority_Array Optional Properties Supported Write Properties Proprietary Properties High_Limit, Low_Limit, Deadband, Limit_Enable, Event_Enable, Notify_ Type, COV_Increment Description, Out_Of_Service, Relinquish_Default, High_Limit, Low_Limit, Deadband, Limit_Enable, Event_Enable, Notify_Type, COV_Increment High_Limit, Low_Limit, Deadband, Limit_Enable, Event_Enable, Notify_ Type, COV_Increment, Relinquish_ Default, Units Event_Enable, Notify_Type, Inactive_Text, Active_Text, Change_Of_ State_Count, Elapsed_Active_Time, Alarm_Value, Polarity Event_Enable, Notify_Type, Inactive_ Text, Active_Text, Change_Of_State_ Count, Elapsed_Active_Time, Minimum_On_Time, Minimum_Off_Time, Relinquish_Default, Feedback_Value, Polarity Event_Enable, Notify_Type, Inactive_ Text, Active_Text, Change_Of_State_ Count, Elapsed_Active_Time, Minimum_On_Time, Minimum_Off_Time, Relinquish_Default, Alarm_Value, Calendar Yes Yes Description Object_Name, Description, Date_List File No No Record_Count File_Size, Record_Count Loop Yes Yes Description, Reliability, Error_Limit, Proportional_Constant, Proportional_Constant_Units, Integral_Constant, Integral_Contant_Units, Derivative_Constant, Derivative_Constant_Units, Bias Description, Out_Of_Service, Time_ Delay, Notify_Type, Error_Limit, Manipulated_Variable_Reference, Controlled_Variable_Reference, Setpoint_Reference, Proportional_Constant, Integral_Constant, Derivative_ Constant, Bias, Setpoint, Action Change_Of_State_Count_Today, 1037, UNSIGNED, Read Only, Number of state changes since 12:00 am. Change_Of_State_Count_Today, 1037, UNSIGNED, Read Only, Number of state changes since 12:00 am. Feedback_Object, 1043, BACnet_ ObjectIdentifier, Writable, Provides a link to an object providing feedback for intrinsic alarming. Change_Of_State_Count_Today, 1037, UNSIGNED, Read Only, Number of state changes since 12:00 am. 5/6

6 B A C n e t P r o t o c o l I m p l e m e n t a t i o n C o n f o r m a n c e S t a t e m e n t Supported Standard Object Types Object Type Multi-State Output Multi-State Value Notification Class Creation Deletion Optional Properties Supported Write Properties Proprietary Properties Yes Yes Description, Reliability, Time_Delay, Acked_Transitions, Notify_Type, Event_Time_Stamps, State_Text, Feedback_Value Yes Yes Description, Reliability, Time_Delay, Acked_Transitions, Notify_Type, Event_Time_Stamps, State_Text, Alarm_Values, Fault_Values, Relinquish_Default, Priority_Array Event_Enable, Notify_Type, State_ Text, Relinquish_Default, Feedback_ Value, Number_Of_States Event_Enable, Notify_Type, State_Text, Relinquish_Default, Alarm_Values, Fault_Values, Number_Of_States Yes Yes Description Object_Name, Description, Priority, Ack_Required, Recipient_List Program Yes Yes Description, Reliability Object_Name, Description, Program_Change, Out_Of_Service Schedule Yes Yes Description, Weekly_Schedule, Exception_Schedule Trend Log Yes Yes Description, Reliability, Start_Time, Stop_Time, Notification_Threshold, Records_Since_Notification, Last_ Notify_Record, Notification_Class, Align_Intervals, Interval_Offset, Trigger, Client_COV_Increment, COV_Resubscription_Interval, Log_ DeviceObjectProperty, Log_Interval, Logging_Type, Trend Log Multiple Yes Yes Description, Reliability, Start_Time, Stop_Time, Notification_Threshold, Records_Since_Notification, Last_ Notify_Record, Notification_Class, Align_Intervals, Interval_Offset, Trigger Device No No Location, Description, Max_Segments_Accepted, Local_Time, Local_Date, APDU_Segment_Timeout, Time_Synchronization_Recipients, Max_Master, Max_Info_Frames, Configuration_Files, UTC_Offset, Last_Restore_Time, Backup_Failure_Timeout, Daylight_Savings_Status, UTC_Time_Synchronization_Recipients, Align_Intervals, Slave_Proxy_Enable, Auto_Slave_ Discovery, Manual_ Slave_Address_ Binding, Slave_Address_Binding, Active_COV_Subscriptions, Last_Restart_Reason, Time_Of_Device_Restart, Interval_Offset, Align_Intervals, Time_Synchronization_Interval Description, Effective_Period, Weekly_Schedule. Exception_Schedule, Schedule_Default, List_Of_Object_ Property_References, Priority_For_ Writing, Out_Of_Service Object_Name, Description, Enable, Start_Time, Stop_Time, Log_DeviceObjectProperty, Log_Interval, Stop_When_Full, Buffer_Size, Record_Count, Notification_Threshold, Notify_Type, Logging_Type, Align_ Interval, Interval_Offset, Trigger, Client_COV_Increment, COV_Resubscription_Interval Object_Name, Description, Enable, Start_Time, Stop_Time, Log_DeviceObjectProperty, Log_Interval, Stop_When_Full, Buffer_Size, Record_Count, Notification_Threshold, Notify_Type, Logging_Type, Align_Interval, Interval_Offset, Trigger Object_Name, Description, Location, Backup_Failure_Timeout, Number_ Of_APDU_Retries, APDU_Timeout, UTC_Offset, APDU_Segment_Timeout, Time_Synchronization_Recipients, UTC_Time_Synchronization_Recipients, Align_Intervals, Slave_Proxy_Enable, Auto_Slave_ Discovery, Manual_ Slave_Address_Binding, Slave_Address_Binding, Interval_Offset, Align_Intervals, Time_Synchronization_Interval Recipient List, 1027, COM- PLEX, List of s linked to this Notification Class. Exception Schedule Enhanced, 1024, COMPLEX, The entire exception schedule plus a label and flag to indicate if the exception can be deleted when out of date. Active Index, 1025, UNSIGNED, Indicates what Exception or Weekly Schedule is active or the Schedule Default. UTC Time Synchronization Recipients, 1028, List of BACnetRecipient, List of UTC recipients. Backup/Restore Password Required Flag, 1029, BOOLEAN, read only indicator of whether a password is required to initiate a backup or restore. Advanced_Feature_Support, Bit String, 1036, Read Only, Indicator of supported advanced features. 6/6