LED-TECH.DE EdiPower 10W
|
|
- Samson Robertson
- 5 years ago
- Views:
Transcription
1 LED-TECH.DE EdiPower 10W
2 Site 2 10W High Power Star LED (warm white) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0734 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: warm white Lumen typ.: 250 mcd More technical Data: ma typ.: 645 ma ma max.: 1290 ma - Emitter structure: 5x4 Chips V typ.: 17.2 V - Junction Temperature: 125 C V max.: 18.3 V - Operating Temperature: -30 C bis +110 C - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
3 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
4 Site 4 10W High Power Star LED (white) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0735 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: white Lumen typ.: 400 mcd More technical Data: ma typ.: 645 ma ma max.: 1290 ma - Emitter structure: 5x4 Chips V typ.: 17.2 V - Junction Temperature: 125 C V max.: 18.3 V - Operating Temperature: -30 C bis +110 C - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
5 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
6 Site 6 10W High Power Star LED (blue) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0736 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: blue Nanometer: 470 More technical Data: Lumen typ.: 120 mcd ma typ.: 645 ma - Emitter structure: 5x4 Chips ma max.: 1290 ma - Junction Temperature: 125 C V typ.: 17.2 V - Operating Temperature: -30 C bis +110 C V max.: 18.3 V - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
7 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
8 Site 8 10W High Power Star LED (green) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0737 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: green Lumen typ.: 250 mcd More technical Data: ma typ.: 645 ma ma max.: 1290 ma - Emitter structure: 5x4 Chips V typ.: 17.2 V - Junction Temperature: 125 C V max.: 18.3 V - Operating Temperature: -30 C bis +110 C - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
9 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
10 Site 10 10W High Power Star LED (red) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0738 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: red Lumen typ.: 250 mcd More technical Data: ma typ.: 645 ma ma max.: 1290 ma - Emitter structure: 5x4 Chips V typ.: 12.1 V - Junction Temperature: 125 C V max.: 13.0 V - Operating Temperature: -30 C bis +110 C - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
11 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
12 Site 12 10W High Power Star LED (yellow) The chip height of only 0.7mm and the total height (incl. the star heat sink) of only 1.2mm makes this new multichip high power LEDs fit into every imaginable application. The light output is enourmous and is equal to about 5 top rank Luxeon LEDs. The most poular advantage is the minimal surface of the LEDs. Only 35mm are enough to make to 20 LED chips fit for example into every MR16 or other housing. Part Number: LT-0739 Many customers may fear thermal problems but a thermal resistance of only 0.8 C per Diameter: 35.0mm watt and additional used heat sink makes ou have a efficiant and space-saving LED Viewing Angle: 120 illuminant. Emitting Color: yellow Lumen typ.: 250 mcd More technical Data: ma typ.: 645 ma ma max.: 1290 ma - Emitter structure: 5x4 Chips V typ.: 12.1 V - Junction Temperature: 125 C V max.: 13.0 V - Operating Temperature: -30 C bis +110 C - Storrage Temperature: -40 C bis +120 C - Substrat Temperature: <100 C (see below) - Thermal Resistance: 0.8 C/Watt (see below) Max. chip junction temperature Max. 150 C, please note relations to the lifetime below (Tj/ C lifetime/h) 150 C = 6.000h 125 C = h 100 C = h 75 C = h 50 C = h 25 C = h Thermal conductivity of the mounted 10W 1. Chip to Substrate (Glue point): 0,8 W/mK 2. Substrate internal: 25 W/mK 3. Substrate to star (Glue point): 0,8 W/mK 4. Star internal (techn. aluminium): 150 W/mK 5. Star to cooler: depentiong on geometry, construction and therm. contact: 0,5-10 W/mK Comparability We have often been asked how much MCD a Luxeon LED may have. This offered LED has the aboce mentioned MCD values at a viewing angle of 10.
13 Application area - Signal installation (traffic lights) - Any kind of ambient lighting - Any kinf of effect lighting - All application where a maximum of light is needed! {warning1}
14 Site 14 Heat Conductive Glue Arctic Silver The Arctic Silver Adhesive heat conductive glue is a two components glue of 62% 65% silver oxide for a high heat conductive coefficient of about 7,5 W/m K. Ideal to connect two objects inseparably. If you want to disconnect two objects later again just intermix the glue with a little heat conductive paste. You have about 3 min. time to change the direction of the objects before it is hardening. Don't burden glued objects for about half a hour. Part Number: LT-0775 Delivery comes including an plastic spattle for mixing the two components. Use a even surface like an old slip of glass for mashing. Technical Data: - Filling: 2x 3.5g - Heat Conductive Value: 7,5W/mK - Operating temperature: -40 C till +150 C
15 Site 15 Imprint LED-TECH.de - The Power Of Light A Candela-Lights Enterprise Main Department Director: Stefan Lenz Neißestrasse 20 D Moers Technical Support & Service Showroom in Moers Phone: (+49) 2841 / Fax: (+49) 2841 / Mobile: (+49) 173 / In face of accurate and constant checking of content the author of these pages does not assume liability for the content of external links or the published content of those websites. The accountable persons are the operaters of these pages themselves. Further we want to point at pictures, graphics and descriptions as well as the pagelayout itself which are all subject to copyright. Every offence will be prosecuted. All mentioned prices are to be understood as gross prices including the value added tax (TAV). All offers are subject to prior sales and without commitment. Delivery times are to be understood from date of receipt of order. Mistakes and changes in prices are always reserved.
16 Seite 16 Notizen
ic-tl46 BLCC SD1C Blue LED - SMD, 3.4 mm spot size
Rev A3, Page 1/7 FEATURES Emission peak at 460 nm Optimized irradiance pattern Temperature range -40 to 125 C High switching speed Packages suitable for SMT mounting APPLICATIONS Illumination for high
More informationic-tl46 TO46-2L1 Blue LED
Rev B1, Page 1/6 FEATURES Emission peak at 460 nm Optimized irradiance pattern Temperature range -40 C to 100 C High efficiency LED chip Fast switching speed TO-46 package for flexible mounting Option:
More informationLuxeon Warm White Emitter & Star
power light source Luxeon Warm White Emitter & Star Technical Data Sheet DS47 Luxeon warm white LEDs are the first to deliver the high quality light required by lighting designers and architects for interior
More informationElectrical and Optical Characteristics
Tungsten LED EWL4T12 Tungsten Bulb Simulation Light-emitting Diode Tungsten LED is a yellow-white solid-state light emitter. Its spectrum is very similar to that of ISO tungsten halogen lamps. The warm
More informationic-sd85 olga SD2C3 Infrared LED
Rev C2, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Broad irradiance pattern (lambertian profile) High temperature range -40 to 125 C High optical output power Fast switching speed
More informationLuxeon V Portable. power light source. Technical Data DS40
power light source TM Luxeon V Portable Technical Data DS4 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationFlat-white LED. Neutral White Light-emitting Diode EWL5FW12. Key Features. Typical Applications. Principal Parameters. Absolute Maximum Ratings
Flat-white LED EWL5FW12 Neutral White Light-emitting Diode Flat-white LED is a neutral white solid-state light emitter. Its spectrum is maximally flat. The white light emission from this device has no
More informationCLARA ED FELICIA ED 4W
CLARA ED FELICIA ED 4W Page 2 of 24 This LED module is designed for external driver and is therefore very easy to mount and connect in applications normally made for Halogen with external wall outlet transformer.
More informationFeatures: Applications:
Water cooling UC 160 Gen2 UV LEDs Table of Contents Technology Overview...2 The advantages of COB Multi-chips-Package...2 Optical & Electrical Characteristics...3 Absolute Maximum Rating...4 Optical &
More informationLED 81x. Test Sockets for High-Power LEDs. Two Global Leaders. One Complete Solution.
LED 81x Test Sockets for High-Power LEDs Two Global Leaders. One Complete Solution. Our story Two Global Leaders. One Complete Solution. Konica Minolta Sensing Americas provides advanced optical technology
More informationPhlatLight White LED Illumination Products. SST-90 Series PRODUCT DATA SHEET. Features. Table of Contents. Applications
PRODUCT DATA SHEET PhlatLight White LED Illumination Products SST-90 Series Features Extremely high optical output: Over 2,250 lumens from a single chip (white) Extremely high efficiency: Over 100 lumens
More informationic-sg85 BLCC SG1C Infrared LED
Rev B4, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed APPLICATIONS
More informationpower light source Technical Data DS21
power light source Luxeon Line Technical Data DS21 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting
More informationFT3 SERIES TRI-LENSES for LUXEON TM LEDs: LUXEON I, III, and V, STAR and EMITTER
FT3 SERIES TRI-LENSES for LUXEON TM : LUXEON I, III, and V, STAR and EMITTER High efficiency Available in 3 different beams 50mm diameter, sized for MR16 lamp applications Patent Pending The FT3 series
More informationpower light source Technical Datasheet DS45
power light source Luxeon III Emitter Technical Datasheet DS45 Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationic-lfh320 obga LFH1C PACKAGE SPECIFICATION
Rev A2, Page 1/6 PACKAGE VIEW RoHS compliant SIZE 5.0 mm x 5.0 mm drb_lfh1c-lfh320_0_pack_2, 5:1 PIN CONFIGURATION PIN FUNCTIONS (top view) No. Name Function Pixel #1 4 3 2 1 A B C D drc_lfh1c-lfh320_0_pack_3c,
More informationSST-50 W LEDs. SST-50 W Product Datasheet. Features: Table of Contents. Applications
SST-50 W LEDs Features: Table of Contents Technology Overview...2 Test Specifications...2 White Binning Structure...3 Chromaticity Bins...4 Product Shipping & Labeling Information...7 Electrical Characteristics...8
More informationRound Through-Hole LED Lamp (3 mm)
Round Through-Hole LED Lamp (3 mm) OLBx4C7 Series High brightness with well-defined spatial radiation patterns U-resistant epoxy lens Choice of blue, green, red or yellow No stand-offs Each OLBx4C7 series
More informationpower light source Technical Datasheet DS45 Luxeon III is rated for up to 1000mA operation, delivering increased lumens per package.
power light source Luxeon III Emitter Technical Datasheet DS45 Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationPRODUCT DATASHEET Minnie series last update 16/1/2017
PRODUCT DATASHEET Minnie series last update 16/1/2017 Product number C12095_MINNIE-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Minnie Reflector LUXEON
More informationCatalog Number UPC Number LED Spot Bullet Flood Light 42W 4204 Lumens White
Catalog Number 71694 UPC Number 60198671694 Description LED Spot Bullet Flood Light 42W 4204 Lumens White QPL ID # PWG6GTSQ Features Philips Lumiled LUXEON 3030 2D Voltage: 120-277VAC Isolated Driver Compartment
More informationLuxeon Warm White Emitter and Star
Technical Datasheet DS47 power light source Luxeon Warm White Emitter and Star Introduction Luxeon warm white LEDs are the first to deliver the high quality light required by lighting designers and architects
More informationpower light source Technical Datasheet DS45 Luxeon III is rated for up to 1000mA operation, delivering increased lumens per package.
power light source Luxeon III Emitter Technical Datasheet DS45 Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationpower light source Technical Datasheet DS46 Luxeon III is rated for up to 1000mA operation, delivering increased lumens per package.
power light source Luxeon III Star Technical Datasheet DS46 Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationETC ORDERING INFORMATION GENERAL INFORMATION. Selador Pearl CE. Accessories
GENERAL INFORMATION The Selador Series Pearl fixture uses the power of white LEDs to provide a highly efficient tool for video and event production. A carefully chosen array of 3200 K warm white LEDs and
More informationpower light source TM Technical Data DS34
power light source TM Luxeon V Emitter Technical Data DS34 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationDOMINANT. Opto Technologies Innovating Illumination RGB 250 : NMRTB-WSG DATA SHEET: SPNova TM. Features: Applications:
DATA SHEET: SPNova TM RGB 250 : NMRTB-WSG SPNova TM Featuring a staggering brilliance and significant flux output, the SPNova showcases the latest technological advent in this range. With its extremely
More informationEmitter Controlled 4 High Power Technology IDC73D120T8H
Diode Emitter Controlled 4 High Power Technology Data Sheet Industrial Power Control Table of Contents Features and Applications... 3 Mechanical Parameters... 3 Maximum Ratings... 4 Static and Electrical
More informationpower light source Technical Data DS35
power light source Luxeon TM Dental Technical Data DS35 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting
More informationLuxeon V Emitter. power light source. Technical Data DS34
power light source TM Luxeon V Emitter Technical Data DS34 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationTL780 SERIES POSITIVE-VOLTAGE REGULATORS
±1% Output Tolerance at ±2% Output Tolerance Over Full Operating Range Thermal Shutdown description Internal Short-Circuit Current Limiting Pinout Identical to µa7800 Series Improved Version of µa7800
More informationic-sn85 BLCC SN1C INFRARED LED
Rev B3, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed APPLICATIONS
More informationpower light source Technical Data DS30
power light source Luxeon TM V Star Technical Data DS3 Luxeon is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting
More informationLuminaire. CANOPY: Spun aluminum canopy with silver finish. Available in flat or round. CORD: 96" standard, custom length available to up to 120".
PRODUCT SPECIFICATIONS Luminaire PENDANT: Extruded aluminum body with silver powder coat finish. Spun aluminum ring with silver powder coat finish. White frosted glass dome. Optional partially frosted
More informationCBM-120. Mosaic Array Series Far Red Chip On Board LEDs. CBM-120-FR CBT-120 Product Datasheet. Features: Table of Contents.
CBM-120-FR CBT-120 Product Datasheet CBM-120 Mosaic Array Series Far Red Chip On Board LEDs Features: Mosaic Array Far Red LED chipset with surface emitting area of 12 mm 2, 4:3 aspect ratio Table of Contents
More informationLuminaire. CANOPY: Spun aluminum canopy with silver finish. Available in flat or round.
PRODUCT SPECIFICATIONS Luminaire PENDANT: Extruded aluminum body with silver powder coat finish. Spun aluminum ring with silver powder coat finish. White frosted glass dome. Optional partially frosted
More informationSilicon Bipolar High f T Low Noise Medium Power 12 Volt Transistors
Silicon Bipolar High f T Low Noise Medium Power 1 Volt Transistors Features Low Phase Noise Oscillator Transistor mw Driver Amplifier Transistor Operation to GHz Available as Available in Hermetic Surface
More informationETC. Selador Pearl. Model Description. Selador Pearl 21 (two cell) Selador Pearl 42 (four cell) Selador Pearl 63 (six cell)
G e n e r a l i n f o r m a t i o n The Selador Series Pearl uses the power of white LEDs to provide a highly efficient fixture for video and event production. A carefully chosen array of 3200K warm white
More informationLED LINEAR TAPES - THE NEW STANDARD
LED LINEAR TAPES - THE NEW STANDARD REVEALING THE LED LINEAR ADVANTAGES LED Linear offers the world s highest quality LED tapes HOW? ADVANTAGE 1 Integrated Circuit Driver LED Linear tapes are controlled
More information4-Pin Red LED Lamp (7.6mm) OPTEK Tec hnology
Packaged in tubes Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type Pb-free Product Photo Here The is designed with higher forward
More informationHigh-Intensity LED in Plastic T-1¾ Package
High-Intensity LED in Plastic T-1¾ Package OPT EK T e c h n o l o g y x x x x Narrow beam angle High brightness LED Water clear plastic package UV resistant epoxy Product Photo Here Each device in the
More informationLEDs A BASIC INTRODUCTION
LEDs A BASIC INTRODUCTION High Power LEDs Function and construction History Power, flux and luminous efficiency Color and binning LED optics LED: Solid State Lighting Electroluminescence The light is emitted
More informationCOPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ1-00R500 (1.0 08/23/13)
940nm Infrared LED Emitter LZ1-00R500 Key Features High Efficacy 940nm 2W Infrared LED Ultra-small foot print 4.4mm x 4.4mm Surface mount ceramic package with integrated glass lens Very low Thermal Resistance
More informationWhite Surface Mount LED Lamp
Side-view white LED Surface mount lead frame package with two pins Wide viewing angles Product Photo Here The is ideal for backlighting LCD screens and for coupling with light guides. This design combines
More informationCBT-90-UV-405 LEDs. CBT-90-UV-405 CBT-120 Product Datasheet. Features: Table of Contents. Applications
CBT-9-UV-45 CBT-2 Product Datasheet Datasheet CBT-9-UV-45 LEDs Table of Contents Technology Overview...2 Optical & Electrical Characteristics...3 Features: >6.5 W of optical power from 4 nm to 4 nm. High
More informationDisplay Surface-mount EADSS050GA2
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. Pb free
More informationCBT-120-UV LEDs. CBT-120-UV Product Datasheet. Features: Table of Contents. Applications
CBT-2-UV LEDs Features: Table of Contents Technology Overview.... 2 Binning Structure.... 3 Optical & Electrical Characteristics.... 4 Optical Electrical Characteristics Graphs... 5 Over 6. W of optical
More informationF6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices
Coherent Diode Lasers Single-Stripe F6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices Coherent s high-power, fiber-coupled, single-stripe diode lasers offer the simplest and easiest means
More informationHP60MW6G 8mm,1W Warm White LED 1W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:
Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain
More informationAPHF1608SEEQBDZGKC. 1.6 x 0.8 mm Full-Color Surface Mount LED
APHF168SEEQBDZGKC 1.6 x.8 mm Full-Color Surface Mount LED DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The source color devices are made with InGaN
More information83092 Photomultiplier Family
83092 Photomultiplier Family 25.4mm (1-inch) Diameter Ruggedized, 10-Stage End-Window PMTs With High Temperature Na2KSb Bialkali Photocathodes for Geophysical Exploration Designed for High Temperature
More informationAmber PLCC4 Surface Mount LED with Domed Lens
Amber PLCC4 Surface Mount LED with Domed Lens High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8 mm tape on 7 diameter reel Compatible
More informationTR5050 LEDs CxxxTR5050-Sxx000
TR5050 LEDs CxxxTR5050-Sxx000 Data Sheet Cree s TR5050 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree s proprietary device technology and
More informationSURFACE MOUNT LED RED/GREEN, 1210 PACKAGE
SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE Industry Standard Package RoHS Compliant Two Chips in One Package Water Clear Lens Wide Viewing Angle Ideal for Status Indication and Lighting Bivar Surface Mount
More informationCatalog Number UPC Number LED Spot Bullet Flood Light 15W 1620 Lumens Bronze
Catalog Number 71679 UPC Number 60198671679 Description LED Spot Bullet Flood Light 15W 1620 Lumens Bronze QPL ID # PJMW56XK Features Philips Lumiled LUXEON 3030 2D Voltage: 120-277VAC Isolated Driver
More informationLuxeon III Star. power light source. Introduction
Technical Datasheet DS46 power light source Luxeon III Star Introduction Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
More informationFiber Coupled Single Bar Diode Laser (CW)
Features High power, high brightness Small size, low weight Gaussian wavelength spectrum Additional function Applications Pumping IR Illumination Medical Industry manufacture Device Dimension (mm) (with
More informationThis product is obsolete. This information is available for your convenience only.
Obsolescence Notice This product is obsolete. This information is available for your convenience only. For more information on Zarlink s obsolete products and replacement product lists, please visit http://products.zarlink.com/obsolete_products/
More informationNext, know your supply voltage. It should be a few volts above the LED forward voltage for reliable, stable LED operation
4. handling 4.1. biasing LEDs The light generated by an LED is directly proportional to the forward current flowing through the device. Various biasing schemes can be used to set the value of the current.
More informationApplications General Purpose Consumer Goods Indicator Lights
High Intensity AlInGaP LED Lamps Technical Data HP SunPower Series HLMP-WLXX HLMP-NL6 HLMP-WHXX HLMP-NH4 HLMP-WGXX HLMP-NG7 Features T-1 (3 mm) and T-1 3/4 (5 mm) General Purpose LED Lamps AlInGaP SunPower
More informationLUXEON III Emitter. power light source. Introduction
Technical Datasheet DS45 power light source LUXEON III Emitter Introduction LUXEON III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
More informationFiber Pigtailed Pulsed Laser Diodes
Fiber Pigtailed Pulsed Laser Features Single and stacked devices up to 65 Watts ex fiber 905 nm and 1550 nm Coupling efficiency up to 85% Excellent temperature stability Custom versions available Applications
More informationCBT-120-UV LEDs. CBT-120-UV Product Datasheet. Features: Table of Contents. Applications
CBT-20-UV LEDs Table of Contents Technology Overview...2 Optical & Electrical Characteristics...3 Features: W of optical power from 375 nm to 390 nm. High thermal conductivity package. Junction to heat
More informationCFT-90 Converted Green High Brightness Green LED
CFT-90 Converted Green High Brightness Green LED Features: Large, monolithic chip with uniform emitting area of 9 mm 2 Phosphor Converted Green LED device with typical center wavelength emission of 579
More informationSensus LED Series. Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Preliminary Data Sheet
Sensus LED Series Product Datasheet Sensus LED Series Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Data Sheet Features: Table of Contents Technology Overview.... 2 Test Specifications...
More informationBridgelux V13 Array. Product Data Sheet DS44. BXRE-27x2000
Bridgelux V13 Array Product Data Sheet DS44 BXRE-27x2000 30x2000 35x2000 40x2000 50x2000 Introduction V Series The V Series LED Array products deliver high quality light in a compact and cost-effective
More informationApplication Note Silicon Flow Sensor SFS01
Application Note Silicon Flow Sensor SFS01 AFSFS01_E2.2.0 App Note Silicon Flow Sensor 1/11 Application Note Silicon Flow Sensor SFS01 1. SFS01 - Classification in the Product Portfolio 3 2. Applications
More informationHarnessing, Amplifying, and Vectoring the LED for Area Illumination
Harnessing, Amplifying, and Vectoring the LED for Area Illumination Closure Plate or Door Frame Module Air Flow Perimeter Vents Provide convective cooling with any air flow. Typical Luminaire Housin Protects
More informationTRENCHSTOP TM IGBT4 Low Power Chip IGC13T120T8L
IGBT TRENCHSTOP TM IGBT4 Low Power Chip IGC13T120T8L Data Sheet Industrial Power Control Table of Contents Features and Applications... 3 Mechanical Parameters... 3 Maximum Ratings... 4 Static and Electrical
More informationSpecification for UV LED
Specification for UV LED SA 3535 UV 1.5W maximum power capability High heat resistance substrate Dimension : 3.85 x 3.5 x 1.9 mm Lead-free reflow soldering application RoHS compliant Vendor Customer Written
More informationShenzhen LED Color Opto Electronic Co., LTD S50WWA-XX SPECIFICATION CHIP-ON-TOP SMD TYPE LED
S50WWA-XX SPECIFICATION CHIP-ON-TOP SMD TYPE LED Document No.: SPC/ S50WWA-XX Model No.: S50WWA-XX Description: 5.5x5.0x1.6mm Top SMD Type 3-chips 0.3 Watt Power WWA Color LED Material: InGaN or AlInGaP
More informationFL3 Series Tri-lenses for LUXEON TM K2 LEDs
FL3 Series Tri-lenses for LUXEON TM K2 LEDs High efficiency Available in 2 different beams The FL3 series offers 2 lens assemblies specifically designed for the Lumileds (1) LUXEON K2 LEDs. A software-optimized
More informationETC GENERAL INFORMATION ORDERING INFORMATION. Selador Lustr CE. Accessories
GENERAL INFORMATION The Selador Series high power Lustr fixture is ideal for stage and studio lighting as a key or fill light as well as stage washes. It produces the subtle tinted colours that lighting
More informationHigh Luminous Efficacy Red LED Emitter LZ1-00R100. Key Features. Typical Applications. Description
High Luminous Efficacy Red LED Emitter LZ1-00R100 Key Features High Luminous Efficacy 5W Red LED Ultra-small foot print 4.4mm x 4.4mm Surface mount ceramic package with integrated glass lens Very high
More informationNJM79L00 3-TERMINAL NEGATIVE VOLTAGE REGULATOR
3-TERMINAL NEGATIVE VOLTAGE REGULATOR NJM79L00 GENERAL DESCRIPTION The NJM79L00 series of 3-Terminal Negative Voltage Regulators is constructed using the New JRC Planar epitaxial process. These regulators
More informationProduct Data Sheet DS42 BXRE-27x x x x x1000
Bridgelux V10 Array Product Data Sheet DS42 BXRE-27x1000 30x1000 35x1000 40x1000 50x1000 Introduction V Series The V Series LED Array products deliver high quality light in a compact and cost-effective
More informationHigh Luminous Efficacy Red LED Emitter LZ4-00R100. Key Features. Typical Applications. Description
High Luminous Efficacy Red LED Emitter LZ4-00R100 Key Features High Luminous Efficacy 10W Red LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Very low
More information3W HI-POWER LED SPECIFICATION
3W HI-POWER LED SPECIFICATION HPB8b-4xK3x Drawn by Checked by Approved by RoHS Conformity DATE:2009/7/13 REV:C HUEY JANN High Power 3W LED is made of hi-eff AS/TS GaInN chips with precise package technique
More informationHigh Luminous Efficacy RGB LED Emitter LZ4-00MC00. Key Features. Typical Applications. Description
High Luminous Efficacy RGB LED Emitter LZ4-MC Key Features High Luminous Efficacy 1W RGB LED Individually addressable die Unlimited color mixing Ultra-small foot print 7.mm x 7.mm Surface mount ceramic
More information1W HI-POWER LED SPECIFICATION
1W HI-POWER LED SPECIFICATION HPB8-4xKx Drawn by Checked by Approved by RoHS Conformity DATE:2009/6/18 REV:B HUEY JANN High Power 1W LED is made of hi-eff AS/TS GaInN chips with precise package technique
More informationFigure 6.5. Five volt regulator with outboard pass transistor and crowbar.
312 Chapter 6 3A fuse (unregulated) I 3 + heat Figure 6.5. Five volt regulator with outboard pass transistor and crowbar. and the 33 ohm resistor. Its function is to short the output if some circuit fault
More informationProduct Data Sheet DS43 BXRE-27x x x x x3001
Bridgelux V15 Array Product Data Sheet DS43 BXRE-27x3001 30x3001 35x3001 40x3001 50x3001 Introduction V Series The V Series LED Array products deliver high quality light in a compact and cost-effective
More informationNPN Silicon MAXIMUM RATINGS THERMAL CHARACTERISTICS DEVICE MARKING. ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) OFF CHARACTERISTICS
NPN Silicon MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage VCEO 45 V Collector Base Voltage VCBO 50 V Emitter Base Voltage VEBO 5.0 V Collector Current Continuous IC 500 madc THERMAL
More informationFeatures MIN. CATHODE LEAD ± 0.10 Sq Typ ± MAX. EPOXY MENISCUS
HLMP-LG75, HLMP-LM75, HLMP-LB75, and 4 mm Standard Oval LEDs Data Sheet Description These Precision Optical Performance Oval LEDs are specifically designed for billboard sign application. The oval shaped
More informationCBT-120. Monolithic Die Series Ultraviolet Chip On Board LEDs. CBT-120-UV Product Datasheet. Features: Table of Contents.
CBT-2 Monolithic Die Series Ultraviolet Chip On Board LEDs Table of Contents Technology Overview.... 2 Ordering Information... 3 Binning Structure.... 4 Optical & Electrical Characteristics.... 5 Optical
More informationLumiBright TM LE 2400B-270
solutions in light LumiBright TM LE 2400B-270 2400B-270 Compact Light Engines provide extreme brightness and a highly uniform light distribution. Chip-on-Board LED technology with metallic PCB substrates
More informationHP70MWJ 8mm,3W White LED 3W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:
Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain
More informationAPTD1608LCGCK 1.6 x 0.8 mm SMD Chip LED Lamp
1.6 x.8 mm SMD Chip LED Lamp DESCRIPTIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is
More informationCarrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015.
DATA SHEET: Right Angle DomiLED TM High Brightness AlInGaP : DSx-PSS Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function
More information5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-45K5Rx Drawn by Checked by Approved by RoHS Conformity DATE:2013/2/21 REV:A HUEY JANN High Power 5W LED is made of hi-eff AS/TS AlInGaP chips with precise package technique
More informationRF Hybrid Linear Amplifier Using Diamond Heat Sink
RF Hybrid Linear Amplifier Using Diamond Heat Sink Item Type text; Proceedings Authors Karabudak, Nafiz Publisher International Foundation for Telemetering Journal International Telemetering Conference
More informationSource Four CE 70W HID jr Zoom
S P E C I F I C A T I O N s PHSICAL Rugged die cast aluminium construction 20 gauge stainless steel shutters in a bi-plane assembly High impact, thermally insulated knobs and shutter handles Two accessory
More informationFiber Pigtailed Pulsed Laser Diodes
Features Single and stacked devices up to 65 Watts ex fiber 905 nm and 1550 nm Coupling efficiency up to 85% Excellent temperature stability Custom versions available Applications Range finding Surveying
More informationCatalog number Lens Option Very Narrow without diffuser Exterior200LED_VeryNarrow_withoutdiffuser_5600Kelvin.ies
Exterior 200 LED, Very Narrow (Balanced white 5600 Kelvin. Without diffuser) (13 ) Photometric Report Martin R&D Optics Laboratory, 31-Oct-2007 Data sheet conforms to American National Standard E1.9-2001
More informationDEMO CIRCUIT 976 LT3476EUHF. Quadruple High Power LED Driver in Buck Mode DESCRIPTION. PERFORMANCE SUMMARY Specifications are at TA = 25 C
DEMO CIRCUIT 976 QUICK START LT3476EUHF GUIDE DESCRIPTION WARNING! Do not look directly at operating LED. This circuit produces light that can damage eyes. Demonstration circuit 976 is a Quadruple High
More informationTesla ACOB TRC57-30W-120
Tesla ACOB TRC57-30W-120 120V Direct Connect - AC LED MODULE Single CCT Flicker Free Triac Dimmable 57mm dia. / 30 Watt / 2765lm / 120V Technical Data Sheet 2017-10-02 Tesla ACOB TRC57LCOBP30WXXKCX 120V
More informationGeneration 3 Sensus LED Series
Sensus LED Series Product Datasheet Generation 3 Sensus LED Series Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Data Sheet Features: Table of Contents Technology Overview.... 2 Test
More informationData Sheet. Description. Features. Applications
LED Light Bars HLCP-A100/-B100/-C100/D100/-E100/-F100/-G100/-H100 HLMP-2300/-2350/-2400/-2450/-2500/-2550 HLMP-2600/-2620/-2635/-2655/-2670/-2685 HLMP-2700/-2720/-2735/-2755/-2770/-2785 HLMP-2800/-2820/-2835/-2855/-2870/-2885
More informationCPC1927. Single-Pole, Normally Open ISOPLUS -264 Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage 2 V P Load Current =2 C: With C/W Heat Sink 6.7 No Heat Sink 2.7 A rms / A DC On-Resistance (max.2 R JC.3 C/W Features 6.7A rms Load Current with
More informationPhlatLight PT39 Projection Chipset
PRODUCT DATA SHEET PhlatLight PT39 Projection Chipset Technology Overview Luminus Devices Projection Technology is an innovative solidstate light source created to replace arc lamps in projection systems.
More information