Creating Mixed Model Value Streams
|
|
- Ethelbert Russell
- 5 years ago
- Views:
Transcription
1 Creating Mixed Model Value Streams Abe Dabdoub Senior Faculty Member
2 Abe Dabdoub, EEng, MBA Senior Faculty Member, Institute for Operational Excellence Clients United Technologies Corporation FMC Technologies Senior Aerospace Sikorsky Aetna Credentials Over 25 years of progressive operational excellence experience in health insurance, oil & gas, aerospace, automotive and electronics industries.
3 Continuous Improvement Companies have done continuous improvement activities for years
4 Continuous Improvement Pareto
5 Impact Continuous Improvement Effort
6 Continuous Improvement
7 Improving Operations
8 Improve Improve Improve Sustain The Lean Journey Sustain Sustain
9 Level of improvement Operational Excellence Mature lean company Time in Years
10 Level of improvement Operational Excellence Operational Excellence Time in Years
11 The Jump to Operational Excellence Level of improvement Time in Years
12 Operational Excellence When each and every employee can see the flow of value to the customer, and fix that flow before it breaks down. SM Kevin J. Duggan
13 The Eight Steps to Achieve Operational Excellence 1. Design a lean flow using lean guidelines. 2. Implement a lean flow. 3. Make the lean flow visual. 4. Create standard work for the lean flow. 5. Make abnormal flow visual. 6. Create standard work for the abnormal flow. 7. Teach employees to maintain and improve the flow to the customer. 8. Free management to work on offense.
14 The Eight Steps to Achieve Operational Excellence 1. Design a lean flow using lean guidelines. 2. Implement a lean flow. 3. Make the lean flow visual. 4. Create standard work for the lean flow. 5. Make abnormal flow visual. 6. Create standard work for the abnormal flow. 7. Teach employees to maintain and improve the flow to the customer. 8. Free management to work on offense.
15 Supplier Weekly 6 Week Forecast Eight Guidelines for End-to-End Production Control XOXO Form Assembly Test Ship FIFO Value Stream Design Weekly Orders FIFO Customer Daily 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Eight VS Guidelines
16 Supplier Weekly 6 Week Forecast Pacemaker Production Control XOXO Ten Guidelines for the Mixed Model Pacemaker Form Assembly Test Ship FIFO Weekly Orders FIFO Customer Daily 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Ten MM Guidelines
17 Six Guidelines for Shared Resources Flow Supplier Weekly Shared Resource Form 6 Week Forecast Production Control XOXO Assembly Shared Resource FIFO Test Weekly Orders FIFO Customer Daily Ship 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Six S/R Guidelines
18 Customers Request Form P/T=15 min. 1 CSR Create File Nine Guidelines for Office Flow Sales Database FIFO Design Pkg. Max = 1.5 days days Log File 4 Hrs. Estimating Cell Takt = 60 min. P/T=170 min. PC/T=55 min. Op = 3 17 Min. 170 Min. Post Office Customers 4 Estimates per Day 1.5 Days min 187 min. L/T P/T Nine Office Guidelines
19 Beijing Walls China Seven Guidelines for Supply Chain Flow Practical Solutions (MO) Axle Co. Unlimited (WV) Premier Rail Cars FIFO Seven SC Guidelines
20 Production 6 Week Control Forecast Supplier Weekly XOXO Pacemaker The Mixed Model Pacemaker Weekly Orders Customer Daily Form Assembly Test Ship FIFO FIFO 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Ten MM Guidelines
21 Pistons: units Brackets: units Arms: units Stamp Mix of Products Flow through the Same Value Stream How will we run all these products through the same value stream when demand changes each day? Collars: units Diverters: units Detectors: units Lifters: units Levers: units Cranks: units Paint FIFO Assemble Ship max 50
22 Number of Products Which Type of Value Stream is this? Discrete Mfg. 2 Discrete manufacturer High mix 1 Discrete manufacturer Degree of customization required Make to Order Mfg. 3 Job shop Very high mix High customization 4 Low mix High customization
23 Welcome to EMC Supply Co. In today s class we will visit the Electro-Motion Control (EMC) Supply Co. EMC Supply Co. builds a wide variety of products for the motion control and electronics industries. They supply distributors and end users. They also build custom products to order. The management at EMC Supply Co. have stated that want to achieve self-healing value stream flow in their high mix environment.
24 Pistons: units Brackets: units Arms: units Stamp Mixed Model Value Streams Collars: units Diverters: units Detectors: units To produce a variety or mix of products or product variations through the same value stream AT THE PULL OF THE CUSTOMER. Lifters: units Levers: units Cranks: units Paint FIFO Assemble Ship max 50
25 EMC Product Family Mixed Model Value Streams
26 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10.How do we deal with changes in customer demand?
27 Product Family Matrix
28 P/N Name Product Family Matrix Injection Molding XS2 Servo Motor X X X X X X X Sensor-Activated Arm X X X A X X X X X X X Photoelectric Detector X X X X Ionization Detector X X X X X Laser-Activated Arm X X X X X X X X X X Manual Servo Motor X X X X X X X Manual Servo Motor II X X X X X X X Manually-Activated Arm X X X A X X X X X X X Fiber Optic Visual Sensor X X X X X X XS3 Servo Motor X X X X X X X Radon Detecter X X X X Bar Code Divertor Piston X X X A X X X X X X X Bar Code Diverter Arm X X X A X X X X X X X Sensor-Activated Piston X X X A X X X X X X X Laser Diverter X X X X X X X X X X XS4 Servo Motor X X X X X X X Carbon Monoxide Detector X X X X X Auto Servo Motor X X X X X X X Laser-Activated Piston X X X X X X X X X X Manually-Activated Piston X X X A X X X X X X X Motion Detector X X X X Stamp Deburr Hand Deburr Paint Welding Mechanical Assy Electrical Assy Final Assy Configure & Test Ship
29 Three Potential Families P/N Name Sensor-Activated Arm A X X X X X X X A Laser-Activated Arm X X X X X X X X A Manually-Activated Arm A X X X X X X X A Bar Code Divertor Piston A X X X X X X X A Bar Code Divertor Arm A X X X X X X X A Sensor-Activated Piston A X X X X X X X A Laser Divertor X X X X X X X X A Laser-Activated Piston X X X X X X X X A Manually-Activated Piston A X X X X X X X A XS2 Servo Motor X X X X B Manual Servo Motor X X X X B Manual Servo Motor II X X X X B XS3 Servo Motor X X X X B XS4 Servo Motor X X X X B Auto Servo Motor X X X X B Photoelectric Detector X X X X C Ionization Detector X X X X X C Fiber Optic Visual Sensor X X X X X X C Radon Detector X X X X C Carbon Monoxide Detector X X X X X C Motion Detector X X X X C Hand Debur Paint Welding Mechanical Assy Electrical Assy Final Assy Configure & Test Ship FAMILY A B C
30 Name Refine by Work Content Hand Debur Paint Welding Mechanical Assy Electrical Assy Final Assy Configure & Test Ship TOTAL A Sensor-Activated Arm X 605 B Laser-Activated Arm X 530 C Manually-Activated Arm X 605 D Bar Code Diverter Piston X 645 E Bar Code Diverter Arm X 655 F Sensor-Activated Piston X 500 G Laser-Activated Piston X 745 H Manually-Activated Piston X 550 I Laser Diverter X 990 X Custom Orders X 615
31 Name Refine by Work Content Hand Debur Paint Welding Mechanical Assy Electrical Assy Final Assy Configure & Test Ship TOTAL A Sensor-Activated Arm X 605 B Laser-Activated Arm X 530 C Manually-Activated Arm X 605 D Bar Code Diverter Piston X 645 E Bar Code Diverter Arm X 655 F Sensor-Activated Piston X 500 G Laser-Activated Piston X 745 H Manually-Activated Piston X 550 I Laser Diverter X 990 X Custom Orders X 615
32 Current State Map
33 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
34 Takt time = customer demand rate for the entire family. Need to select time period and understand limits of the mix Takt Time for the Mix
35 Name DEMAND Sensor-Activated Arm 65 Laser-Activated Arm 85 Manually-Activated Arm 35 Bar Code Diverter Piston 70 Bar Code Diverter Arm 50 Sensor-Activated Piston 55 Laser-Activated Piston 20 Manually-Activated Piston 25 Custom Orders 45 Total Demand 450 Takt Time Example Effective Time = 900 min. * * 2 shifts x (8 hrs. -.5 hrs.) TAKT = Effective Time Total Demand = 2 min.
36 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
37 Determining Equipment Needs Name A Sensor-Activated Arm B C D E F G H X Laser-Activated Arm Manually-Activated Arm Bar Code Diverter Piston Bar Code Diverter Arm Sensor-Activated Piston Laser-Activated Piston Manually-Activated Piston Custom Orders Configure & Test C/T DEMAND TIME NEEDED Effective Working Time Machines Required Configure & Test Total Time Sum
38 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
39 Interval for the Mix In a mix environment we must define the Interval in which the pacemaker will run the mix of products. The concept of the interval must be clearly understood. You may have hear the term EPEI which stands for Every Product Every Interval.
40 The Interval
41 The Interval 1 Week
42 1 Day The Interval
43 Is there Enough Time for Changeovers? We would compare the total time needed to the effective working time per interval. Any left over time can be used for changeovers. Time left for changeovers 100 min. 10 Products in the Family Max C/O time = 10 min. Time Machine station Effective working time per interval 900 min. Total time needed per interval 800 min.
44 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
45 How will we Flow Work through the Pacemaker?
46 Current State Balance Charts Future State Common Tools
47 Takt = 120 sec. Takt = 120 sec. Current State Operator Balance Chart - Part B (Laser-Activated Arm) 140 sec. 110 sec. 100 sec. Elect. Assembly Final 60 sec. Assembly Config & Test Mech. 30 sec. Assembly Welding Operator Balance Chart - Part A (Sensor-Activated Arm) Mech. 45 sec. Assembly Welding 140 sec. 90 sec. Elect. Assembly 130 sec. Final Assembly 110 sec. Config & Test Takt = 120 sec. Takt = 120 sec. Future State Operator Balance Chart - Part B (Laser-Activated Arm) 110 sec. 110 sec. 110 sec. Elect. Assembly Final Assembly 65 sec. Mech. Config. Assembly Elect. & Test Assembly Final Assembly Welding Operator Balance Chart - Part A (Sensor-Activated Arm) 110 sec. 110 sec. 110 sec. 100 sec. Mech. Elect. Final Assembly Assembly Assembly Eliminate Walking Welding Config. & Test Common Tools
48 Machine Cycle Times Products with a high cycle time at a station may exceed mix takt time. Bottleneck 200 sec. Testing Takt Time = 120 sec.
49 Balancing Machine Cycle Times Some products have a higher Test cycle time than takt time A small FIFO lane absorbs the mix difference in machine times FIFO Lane sized to the interval Pacemaker seconds FIFO seconds Test
50 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
51 Balancing Flow for the Mix Since the labor content varies and not all products can be balanced to takt time, we must decide the best way to balance the products based on our business. Let s look at balancing options
52 Option # 1: Discrete Parts Low Demand Variation High Volume # Operators always constant Output varies based on work content Level mix, sequence orders based on work content and pull signals Pacemaker seconds Balancing Examples Level the schedule and keep labor constant, build products in order: A C B A C B A C B FIFO Seconds Test Ship
53 Option # 2: Discrete Parts Custom Parts High Demand Variation Short Lead Times Build to demand as much as possible Output constant, labor varies A C B C C B Pacemaker 110 seconds Balancing Examples Balance to the takt time and add labor when a product exceeds the takt time. Try to build products to demand. FIFO Prod Control Test s AWCT=110s FIFO Ship Customer demand Small overflow of main products when mix is exceeded
54 Number of Products Which Type of Value Stream is this? Discrete Mfg. 2 Discrete manufacturer High mix 1 Discrete manufacturer Degree of customization required Make to Order Mfg. 3 Job shop Very high mix High customization 4 Low mix High customization
55 Re-Balance for Building to Demand
56 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
57 By Standard Work we mean that any operator following a prescribed method, with a proper workstation, and proper tools, should be able to perform the amount of work required in the same amount of time, without risk to health or safety. Creating Standard Work
58 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
59 Pitch is targeted to be: Takt time x something (ex. Pack size) Establishing Pitch How can we create pitch when the pack size is different for each product?
60 Name Sensor-Activated Arm min 12 Laser-Activated Arm min 12 Manually-Activated Arm min 12 Bar Code Diverter Piston min 24 Bar Code Diverter Arm min 24 Sensor-Activated Piston min 24 Laser-Activated Piston min 6 Manually-Activated Piston min 6 Custom Orders min 6 Creating the Schedule Box # Operators Pack Qty Takt time Min per Case Max = 24 minutes Min = 6 minutes Pitch = 24 minutes 4 slots needed per pitch increment
61 Pitch = paced withdrawal at the pacemaker. Pitch = visual timeframe. I withdraw parts from the pacemaker every twenty four minutes What is Pitch?
62 Slot = 6 minutes Setting Up the Schedule Box Pitch increments or Buckets of capacity Sensor-Activated Arm Shift 1 6:00 Shift 2 3:30 Laser-Activated Piston Bar Code Diverter G G G G 6:24 6:48 3:54 4:18 D Max = 24 minutes Min = 6 minutes Pitch = 24 minutes 4 slots needed per pitch increment A A
63 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
64 Scheduling Products with Various Work Contents Mix Analysis Product Pacemaker Takt Time Testing Cycle Anticipated Mix Time A sec 65 B sec 85 C sec 35 D sec 70 E sec 50 F sec 55 G sec 20 H sec 25 X sec 45
65 Logic Chart
66 Loading the Schedule Box Shift 1 6:00 6:24 6:48 7:12 7:36 8:00 8:39 9:03 9:27 9:51 10:15 10:39 11:33 11:57 12:21 12:45 1:24 1:48 2:12 6:24 6:48 7:12 7:36 8:00 8:24 9:03 9:27 9:51 10:15 10:39 11:03 11:57 12:21 12:45 1:09 1:48 2:12 2:30 G D D D D H H X E E E F C A A A B B B G H H X G H X X C A A B B B B G H X X 4 operators 3 operators
67 Future State Map
68 Key Questions and our Agenda 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand?
69 Finished Goods Level We can establish preset levels of the supermarket based on the flexibility and performance of the value stream LEVEL 1 LEVEL 2 LEVEL 3 CUSTOMER
70 Supermarket limits Flexible Supermarkets Total demand for the product family Lead time intervals
71 1. Do you have the right product families? 2. What is the takt time at the pacemaker? 3. Can the equipment support takt time? 4. What is the interval? 5. What are the balance charts for the products? 6. How will we balance flow for the mix? 7. How will we create standard work for the mix? 8. How will we create pitch at the pacemaker? 9. How do we schedule the mix at the pacemaker? 10. How do we deal with changes in customer demand? Summary
72 This course is available online and follows the same standard work as the instructor used today. For more information please visit Online Training in Mixed Model Value Streams
73 Live Training Events Each year the Institute for Operational Excellence producing training events throughout the U.S. and Europe. London, England May 8-10, 2017 Denver, CO June 12-14, 2017 London, England May 11, 2017 Denver, CO June 15, 2017 For more information please visit
Creating Flow in High- Variety Environments Kevin J. Duggan, President. Copyright 2016 Duggan Associates. dugganinc.com
Creating Flow in High- Variety Environments Kevin J. Duggan, President dugganinc.com 2016 Duggan Associates. All Rights Reserved. Kevin J. Duggan, President President, Duggan Associates, an international
More informationInstructors Guide. Composites Fabricators Association. September, 1998
Controlled Spraying Training Instructors Guide September, 1998 Composites Fabricators Association Composites Fabricators Association 1655 N. Ft. Myer Dr., Arlington, VA 22209 (703)-525-0511 CFA 1998 CFA
More informationRod Support Systems Cost Comparison
Rod Support Systems Cost Comparison Ref. Time Estimation Booklet 2.810 Nov 2, 2016, T. Gutowski 1 Example Problem Job Shop to large scale production 2 Picking Manufacturing Systems Job Shops very flexible,
More informationMIDTERM REVIEW INDU 421 (Fall 2013)
MIDTERM REVIEW INDU 421 (Fall 2013) Problem #1: A job shop has received on order for high-precision formed parts. The cost of producing each part is estimated to be $65,000. The customer requires that
More informationWHEN A PLC IS TOO MUCH, AND SPACE FOR
WHEN A PLC IS TOO MUCH, AND SPACE FOR A RELAY SEQUENCE CIRCUIT IS TOO LITTLE Pattern Selector 59 2.33 66 2.6 70 2.75 No programming required Select from among 15 preset patterns Wiring far simpler than
More informationPLEASE READ FIRST (NEW 2011 VERSION) Main features:
PLEASE READ FIRST (NEW 2011 VERSION) Main features: engine control system, the user can set different types of crankshaft independent Signal output (for all models of the computer-driven) automatic transmission
More informationGlobal Industrial Robot Market: Industry Analysis & Outlook ( )
Global Industrial Robot Market: Industry Analysis & Outlook ----------------------------------------- (2016-2020) Executive Summary The industrial robots have revolutionized the manufacturing sector. The
More informationIntroduction to Robotics in CIM Systems
Introduction to Robotics in CIM Systems Fifth Edition James A. Rehg The Pennsylvania State University Altoona, Pennsylvania Prentice Hall Upper Saddle River, New Jersey Columbus, Ohio Contents Introduction
More informationBeijing TopValue Global Co.,Ltd.
Beijing TopValue Global Co.,Ltd. Value Integrity Profession Innovation Value Integrity Profession Innovation TopValue Philosophy 1) Value (Our objective is to add the value to customers, partners, employees
More informationFinal Presentation Procter & Gamble: Gillette, South Boston Summer 2014 Internship
Final Presentation Procter & Gamble: Gillette, South Boston Summer 2014 Internship Hannah Neitzke Automation & Packaging Equipment Engineering Manager: Keith Swenson Personal Background Hometown: Sugarland,
More informationPresentation Temporary Presentation
Presentation 2017 Temporary Presentation 2014 12.08.2014 1 Company structure Sales & production subsidiary USA Sales subsidiary Germany Headquarters & production site Worldwide representation Custom designed
More informationRoadmap to Industry 4.0 What it takes to build the factory of the future
Roadmap to Industry 4.0 What it takes to build the factory of the future Bangkok, July 20, 2017 Note: this presentation leverages findings from the BCG study: "The Factory of the Future"; for the full
More information10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending
10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with
More informationn PRECISION TOOLING MADE IN THE USA SINCE 1965 n
n PRECISION TOOLING MADE IN THE USA SINCE 1965 n PRECISION TOOLING MADE IN THE USA SINCE 1965 precision Living up to our commitment. Our catalog lists our extensive line of ground perforators, close space
More informationTooling mold. Tooling mold
Tooling mold Tooling mold * 1 cavity black box mold * Customer is from USA, a professional plastic parts supplier. * With Hasco standard mold base, mold base material is with S50C. * With Hasco standard
More informationCase Study: Dry Cast Molding Rejects
Case Study: Dry Cast Molding Rejects James F. Leonard, Consultant Jim Leonard Process Improvement In late 2000, Biocompatibles plc emerged from years of biomedical research in their laboratories outside
More informationPHOTOREFLECTIVE SENSOR LEADFRAME PACKAGE
d DATA SHEET LEADFRAME PACKAGE HVS6003-002 FEATURES: VCSEL and phototransistor in industry standard leadframe packaging IEC 80625 Class 1 Laser Product Optical plastics block visible wavelength for better
More informationKeyTec Suzhou (China) presentation
KeyTec Suzhou (China) presentation Our company Suzhou KeyTec Precision Components Co. Ltd. (China) Established WOFE in 2000 Total investment 18M$ Fully equiped Toolshop Metal & Plastic & Decoration Components
More informationMANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES.
MANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES www.steuby.com John Steuby- Founder John J. Steuby Company, founded in 1962, is a family owned and operated manufacturing company, specializing
More information0603 Package Infrared LED
Technical Data Sheet 0603 Package Infrared LED MIR60363T and MIR60383T Features 0603 package Peak wavelength λp=940nm Package in 8mm tape on 7 diameter reel Compatible with infrared and vapor phase reflow
More informationMulti Drop Bus 5-Tube Coin Changer. Series. Service Manual B D A C E SAT
Multi Drop Bus 5-Tube Coin Changer Series Service Manual DIS C/C A C E MOD B D SAT AUT 2 TABLE OF CONTENTS Page 1 Outline... 3 2 Product Model Names... 4 3 General Specifications... 5 4 Detailed Specifications...
More informationTraffic Signal Timing Coordination. Innovation for better mobility
Traffic Signal Timing Coordination Pre-Timed Signals All phases have a MAX recall placed on them. How do they work All phases do not have detection so they are not allowed to GAP out All cycles are a consistent
More informationTechnical Data Sheet 0.8mm Height Flat Top Infrared LED
Technical Data Sheet 0.8mm Height Flat Top Infrared LED Features Small double-end package Low forward voltage Good spectral matching to Si photo detector Package in 8mm tape on 7 diameter reel Pb free
More informationMicro Wizard Instructions
How to install FAST TRACK K3 4-digit actual times and 1-digit sequence of finish display timer with Computer Serial Interface Enclosed you will find the Fast Track finish line, AC adapter and remote start
More informationMarco TRS Total Refraction System
Marco TRS-5100 Total Refraction System TRS-5100: Total Refraction System The TRS has a forehead position detector (blue LED) for reliable vertex measurements. Wide Visual Field (40 ) apertures provide
More informationCHEVY 4100/4400 SUPERRAIL MOUNTING KIT WITH ADAPTER FOR B&W GOOSENECK PART #4432
CHEVY 4100/4400 SUPERRAIL MOUNTING KIT WITH ADAPTER FOR B&W GOOSENECK PART #4432 Installation Instructions SPECIFICATIONS Fits 2011-2018 Chevy 2500 & 3500 Short Bed Mounts to B&W gooseneck part #1011 Hitch
More information2015 Local #871 Wage Schedules
The following studio minimum wage scale shall be effective for the period commencing with August 2, 2015 to and including July 30, 2016. Studio Minimum Rates Coordinators, Accountants & Schedule A Allied
More informationLab Design of FANUC Robot Operation for Engineering Technology Major Students
Paper ID #21185 Lab Design of FANUC Robot Operation for Engineering Technology Major Students Dr. Maged Mikhail, Purdue University Northwest Dr. Maged B.Mikhail, Assistant Professor, Mechatronics Engineering
More informationWELDING POSITIONING EQUIPMENT
WELDING POSITIONING EQUIPMENT It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT designs
More informationA Strategy for Performance Excellence. 2000, QualityToolBox.com, LLC, all rights reserved
A Strategy for Performance Excellence 1 Performance Excellence Series Training Module Elements Executive Overview Knowledge Breakthrough Tools Workbook Lecture notes Lecture notes Participant manual 2
More informationMoving from R&D to Manufacture
Moving from R&D to Manufacture Webinar to SBIR awardees May 9, 2013 Clara Asmail Senior Technical Advisor NIST MEP 1 Agenda Overview of NIST MEP program Technology Acceleration and MEP s role Sampling
More informationcontrol & display PROGRAMMABLE SENSOR CONTROLLER COMPLETE VERSATILITY OF SENSOR MANAGEMENT & DATA COMMUNICATIONS
S E N S O R S PROGRAMMABLE SENSOR CONTROLLER TX9044 COMPLETE VERSATILITY OF SENSOR MANAGEMENT & DATA COMMUNICATIONS Analogue sensors, temperature devices, frequency inputs and digital sensors direct fingertip
More informationHydraulic Hand Crimping Tool, PN
ORIGINAL INSTRUCTIONS Hydraulic Hand Crimping Tool, PN 59975-1 Instruction Sheet 408-6758 21 JUN 17 Rev F PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually
More informationTechnical Data Sheet 0603 Package Infrared LED
Technical Data Sheet 0603 Package Infrared LED Features 0603 package Peak wavelength λp=940nm Package in 8mm tape on 7 diameter reel Compatible with infrared and vapor phase reflow solder process. Pb free
More informationHigh-speed Sub-micron Displacement Sensor with 40,000 Samples/sec. High Accuracy Inductive Gauging Technology
High-speed, High-Accuracy Digital Displacement Inductive Sensor EX-V Series High-speed Sub-micron Displacement Sensor with 40,000 Samples/sec. High Accuracy Inductive Gauging Technology High-Performance
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationProduct Realization in the Defense Aerospace Industry
Product Realization in the Defense Aerospace Industry September 18, 2002 Presented By: Tom Shields LAI Content Part I General lean concepts in factory design Part II Introduction Manufacturing System Design
More informationMaintenance Parts Guide
TRANS-LUX PTS-9200, PTS-9400, PTS-9600, and PTS-9800 STRETCHERS TRANS-LUX STRETCHERS Maintenance - Parts Read and understand all of the instructions and safety information in Owners Operation Manual before
More informationMoving from R&D to Manufacture
Moving from R&D to Manufacture NSF I/UCRC Annual Meeting January 9, 2014 Clara Asmail Senior Technical Advisor NIST MEP Agenda Overview of NIST MEP program Technology Acceleration and MEP s role Sampling
More informationLS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
More informationRobotics Evolution: From Production Rate to Human Productivity
Chetan Kapoor Senior Director of Technology Innovation Yaskawa America, Motoman Robotics Division Robotics Evolution: From Production Rate to Human Productivity 2016 YASKAWA America, Inc. YASKAWA.COM 100
More informationManufacturing Readiness Assessment Overview
Manufacturing Readiness Assessment Overview Integrity Service Excellence Jim Morgan AFRL/RXMS Air Force Research Lab 1 Overview What is a Manufacturing Readiness Assessment (MRA)? Why Manufacturing Readiness?
More informationIN ELECTRICAL ENGINEERING - I C M E T CRAIOVA
Taking into account that power transformer is the major item of equipment in power systems, its correct operation is vital to system operation. It is well known that transformer failures are sometimes
More informationVW Golf V Laser Processing Concept and Production Implementation
VW Golf V Laser Processing Concept and Production Implementation Tim Morris, TRUMPF Inc., Laser Technology Center Information Provided by: Klaus Loeffler, Volkswagen AG, VW Golf V: Concept and Implementation
More informationA UNIQUE LOOK Series Shape & Sand Machines Rev. E. 93 Model 330 pictured
4500 Series Shape & Sand Machines Rev. E 93 Model 330 pictured UNIQUE Shape & Sand Machine History Unique has been producing Shape and Sand Machines for over 20 years and confidently produce quality industrial
More informationStandard Operating Procedure for Ceramics Area Tyler School of Art Jan 19, 2009
Standard Operating Procedure for Ceramics Area Tyler School of Art Jan 19, 2009 The following guidelines determine the proper use and access to all Ceramics Area spaces. The spaces outlined in this policy
More informationAnalog Vs. Digital Weighing Systems
Analog Vs. Digital Weighing Systems When sizing up a weighing application there are many options to choose from. With modern technology and the advancements in A/D converter technology the performance
More informationTechnical Data Sheet 0603 Package Infrared LED
Technical Data Sheet 63 Package Infrared LED Features Peak wavelength λp=94nm Package in 8mm tape on 7 diameter reel Compatible with infrared and vapor phase reflow solder process. Pb free The product
More informationCATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
More informationDIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES
Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The
More informationHC900 Hybrid Controller
Honeywell HC900 Hybrid Controller When you need more than just discrete control Product Note - Pulse/Frequency/Quadrature (PFQ) Module Model 900TCK-0001 The PFQ Module for the HC900 controller is a multi-function
More informationAccurax G5 Servo System
Servo System Extreme mechatronics meets -Stream Automation»» Sub micron precision and ms settling time»» Motion network and safety built-in»» Double registration and full closed loop G5 Series Servo System
More informationINSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND
More informationMachine Vision Beyond the Factory. Jeff Burnstein President October 18, 2012 Beijing
Machine Vision Beyond the Factory Jeff Burnstein President October 18, 2012 Beijing 1 Machine Vision is No Longer Tied to the Factory Biometrics Medical Imaging Traffic Management High end Security and
More informationThe Tool, Mould & Die Sector and the. Automotive Industry. Uddeholm Automotive Tooling Seminar Sunne / Sweden
The Tool, Mould & Die Sector and the Automotive Industry Uddeholm Automotive Tooling Seminar Sunne / Sweden The Tool, Mould & Die Sector and the Automotive Industry Uddeholm Automotive Tooling Seminar
More informationMeera Laser Solutions
+91-8071682088 Meera Laser Solutions https://www.indiamart.com/meeralasersolutions/ We are manufacturing & integrating Laser Welding s, Laser Cutting s, Laser Drilling, Laser Marking & engraving s, Robot
More informationRadiocontrol F. Floor Heating Controller Radio control system for floor heating
Radiocontrol F Floor Heating Controller Radio control system for floor heating IMI HEIMEIER / Floor Heating Control / Radiocontrol F Radiocontrol F The Radiocontrol F radio control system for controlling
More informationANSI/ RIA R15.06 (Robot Safety Standard) Update. Acknowledgements
ANSI/ RIA R15.06 (Robot Safety Standard) Update Roberta Nelson Shea Global Marketing Manager, Safety Components Rockwell Automation October 14 th 16 th, 2013 ~ Indianapolis, Indiana USA Acknowledgements
More informationChapter 5: Signal conversion
Chapter 5: Signal conversion Learning Objectives: At the end of this topic you will be able to: explain the need for signal conversion between analogue and digital form in communications and microprocessors
More informationDIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS
Digital Thermometer 23 88 350 mm 3 kg (8-5/8 3-/2 3-3/4" 6.6 lbs) The Digital Thermometer has 6 ranges of temperature sensors and measuring functions of DC V and Ω. YOKOGAWA-original A/D converter (feedback
More information1206 Package Chip Infrared LED With Inner Lens EAISV3010A0
Features Small double-end package Low forward voltage Good spectral matching to Si photo detector Pb free The product itself will remain within RoHS compliant version. Descriptions is an infrared emitting
More informationAgilent AEDS-962x for 150 LPI Ultra Small Optical Encoder Modules
Agilent AEDS-962x for 150 LPI Ultra Small Optical Encoder Modules Data Sheet Description This is a very small, low package height and high performance incremental encoder module. When operated in conjunction
More informationSimplified Operations for TM-3100 Series Digital Tachometer
Simplified Operations for TM-3100 Series Digital Tachometer The TM-3100 series Digital Tachometers has the most fundamental function in rotational measurement of four standard models (rotation speed display,
More information0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8
Features High reliability Small double-end package Peak wavelength p=850nm Package in 8mm tape on 7 diameter reel Low forward voltage Pb free The product itself will remain within RoHS compliant version.
More informationFOR TASKED GREATNESS. Collaborative robots deliver a fast return on investment for the production of firefighting equipment
by Mette McCall, press contact, Universal Robots TASKED FOR GREATNESS Collaborative robots deliver a fast return on investment for the production of firefighting equipment What happens is the machine wears
More informationSahajanand Laser Technology Limited
+91-8048761921 Sahajanand Laser Technology Limited https://www.indiamart.com/sahajanandlaser/ Manufacturer, Exporter & Supplier of Laser Cutting, Laser Marking, Laser Welding, Solar Cell Scribing, Diamond
More informationThe Market for Temperature Sensors in the Americas, 3 rd Edition
1 The Market for Temperature Sensors in the Americas, 3 rd Edition Overview 27 Water Street Wakefield, MA 01880 +1 (781) 245-3200 +1 (781) 224-7552 (fax) www.flowresearch.com Publication Date: Q1 2017
More information1.8mm Round Subminiature Infrared LED IR42-21C/TR8
Features Compatible with infrared and vapor phase reflow solder process. Low forward voltage Good spectral matching to Si photodetector Pb free The product itself will remain within RoHS compliant version.
More informationLMC7660 Switched Capacitor Voltage Converter
Switched Capacitor Voltage Converter General Description The LMC7660 is a CMOS voltage converter capable of converting a positive voltage in the range of +1.5V to +10V to the corresponding negative voltage
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationFORD 4100/4400 SUPERRAIL MOUNTING KIT WITH ADAPTER FOR B&W GOOSENECK PART #4431
FORD 4100/4400 SUPERRAIL MOUNTING KIT WITH ADAPTER FOR B&W GOOSENECK PART #4431 Installation Instructions SPECIFICATIONS Fits 1999 2016 Ford F250 & F350 Short Bed Mounts to B&W gooseneck part #1108 & 1111
More informationF84S Design Features F85S
F84S Designed for "On Highway" size truck and bus diesel engines, such as Cummins, Detroit, CAT3400, Mercedes, Iveco, Hino, Mitsubishi, John Deere, etc. F85S Designed for Dual Workstations for Production
More informationTeaching Mechanical Students to Build and Analyze Motor Controllers
Teaching Mechanical Students to Build and Analyze Motor Controllers Hugh Jack, Associate Professor Padnos School of Engineering Grand Valley State University Grand Rapids, MI email: jackh@gvsu.edu Session
More informationPreliminary ITR1502SR40A/TR8
ITR152SR4A/TR8 Preliminary Features High sensitivity Cut-Off visible wavelength Compliance Halogen Free(Br < 9ppm, Cl < 9ppm, Br+Cl < 15ppm) Compliance with EU REACH This product itself will remain within
More informationAutomotive Supply Industry Law
Automotive Supply Industry Law A Better Partnership Warner Norcross & Judd LLP 1 The speed at which your business grows depends upon the ability to anticipate what s around the curve. Our automotive attorneys
More informationInside India: Understanding India s Current and Future Automotive Industry. Focus on the Future UM Automotive Research Conferences WELCOME!
Inside India: Understanding India s Current and Future Industry Focus on the Future UM Research Conferences WELCOME! Presentations available at: www.umtri.umich.edu/aad Bruce M. Belzowski Assistant Research
More information00278 R1 AXLE, FOR 1-1/8" FREE WHEEL HUBS
00 ACTUATOR VALVE, O-RING PORTS 00 C-CLIP, /" 00 SPRING, VALVE SPOOL RETURN 00 COLLAR, / ID 00 WASHER, / USS, ZINC 00 HH CAP SCREW, /- NC X -/ G ZINC 0 FITTING, 0-- 00 O-RING, - FITTING 000-BO RELIEF VALVE,
More informationHNB2727W-OS01 Hong Series
Preliminary Features Unique packaging technology provides better moisture resistance for outdoor use. Various options for color mixture including white. Good color fidelity and brightness uniformity across
More informationSILVER SERIES. Reliable compact industrial infrared thermometers for. Temperatures below 3632 F/2000 C Non-reflective target materials Moving targets
SILVER SERIES Low Cost, Single-Wavelength (1λ) Industrial Infrared Thermometers SSDS2013 Reliable compact industrial infrared thermometers for Temperatures below 3632 F/2000 C Non-reflective target materials
More information0805 Package Infrared LED EAIST2012A1
Features High reliability Small double-end package Peak wavelength λp=85nm Package in 8mm tape on 7 diameter reel Low forward voltage Pb free The product itself will remain within RoHS compliant version.
More informationField Failure Rate Estimate from HALT Results
Overview of AFR Estimator Field Failure Rate Estimate from HALT Results The AFR Estimator is a patent pending mathematical model that, when provided with the appropriate HALT and product information, will
More informationNON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)
NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically
More informationShaheen Perween Tel #: ,
Shaheen Perween Tel #: +92 21 99261261, +92 3232180626 Email: shah30@neduet.edu.pk, spfiz@yahoomail.com Personal Details Nationality : Pakistani Research Gate : https://www.researchgate.net/profile/shaheen_perween
More informationMiniature circuit-breakers S 280 UC series. System pro M. Technical data
Technical data 11 Robbie Rd. / Avon, MA 02322 T:(508)513-1000 F:(508)513-1100 70 Ernest St. / Providence, RI 02905 T:(401)781-7100 www.controllerservice.com System pro M Prior to connection of aluminum
More informationNmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) Galvanometer Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical
More informationA. Measured weight of the payload (not including payload plate) Table 1. Weights of the payload subsystems
Payload Title: High Altitude Radiation Detector Payload Class: Small Large (circle one) Payload ID: Institution: Contact Name: Contact Phone: Contact E-mail: GU-HARD-PL02 Gannon University Nichole McGuire
More informationNorthern Ireland The Communications Market Report Chart Pack
Northern Ireland The Communications Market Report 2016 Chart Pack Northern Ireland s communications market 3 Key facts about Northern Ireland Figure Northern Ireland UK Population 1.852 million (mid-2015
More informationNmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback technology significantly
More informationEngineering Data Rail Lifters
Engineering Data Rail Lifters Bolt On Ready Stock Rails This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13 - Rev.
More informationDiversity drives diversity. From the boardroom to the C-suite
Diversity drives diversity From the boardroom to the C-suite Contents 2 Gender diversity accelerates board renewal and diversification. 4 Progress toward gender diversity on boards continues. 8 More women
More informationSignal Patterns for Improving Light Rail Operation By Wintana Miller and Mark Madden DKS Associates
Signal Patterns for Improving Light Rail Operation By Wintana Miller and Mark Madden DKS Associates Abstract This paper describes the follow up to a pilot project to coordinate traffic signals with light
More informationThe Allen-Bradley Servo Interface Module (Cat. No SF1) when used with the Micro Controller (Cat. No UC1) can control single axis
Table of Contents The Allen-Bradley Servo Interface Module (Cat. No. 1771-SF1) when used with the Micro Controller (Cat. No. 1771-UC1) can control single axis positioning systems such as found in machine
More informationENGINEERING CAPABILITIES
E N G I N E E R I N G SMI is proud to run a fully contained operation, allowing us to have 100% control of our quality and processes at all times. From writing our own programs to on-site robotic automation,
More informationMY-L1325FC/L1530FC Metal Fiber Laser Cutting Machine
MY-L1325FC/L1530FC Metal Fiber Laser Cutting Machine Wisely Laser Machinery Limited 7F, Blding 7th, JSC Industrial Area, Jingnan Road, Buji, Shenzhen 518112 China Tel: 0086-755 8996 1916 Fax: 0086-755
More informationBourns Precision Potentiometers and Turns-Counting Dials. Short Form Brochure
Bourns Precision Potentiometers and Turns-Counting Dials Short Form Brochure Introduction Bourns has been a pioneer in both wirewound and non-wirewound resistive technology for over half a century and
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationError-Proofing Using sensors to prevent product defects and drive customer satisfaction
Error-Proofing Using sensors to prevent product defects and drive customer satisfaction Brian Schriver Product Manager Error Proofing Sensors Copyright 2008 Rockwell Automation, Inc. All rights reserved.
More informationINSTRUMENTATION AND CONTROL TUTORIAL 3 SIGNAL PROCESSORS AND RECEIVERS
INSTRUMENTATION AND CONTROL TUTORIAL 3 SIGNAL PROCESSORS AND RECEIVERS This tutorial provides an overview of signal processing and conditioning for use in instrumentation and automatic control systems.
More informationHPX-ET Series. Gang-mounted Distributed Remote Cluster Type Fiber Optic Photoelectric Sensors. Specifications. click
6 HPX-ET Series FEATURES Connector Connection Type 16-unit Gang-mounting Sensors Strongly Support the Request for Wiring and Space Savings. Distributed Remote Cluster Arrangement is a New Concept for Designing
More informationMold trial Mold trial
Mold trial Mold trial * Molding testing and Molding capability : we have 50~250T injection molding machines in house, 300~3000T machines in associated party. * We test the mold and product wide range of
More information