VNIV.EX454 - Sprinklers, Automatic and Open. Sprinklers, Automatic and Open
|
|
|
- David Flynn
- 5 years ago
- Views:
Transcription
1 Page 1 of 16 Page Bottom VNIV.EX454 Sprinklers, Automatic and Open Sprinklers, Automatic and Open See General Information for Sprinklers, Automatic and Open RELIABLE AUTOMATIC SPRINKLER CO INC 1470 SMITH GROVE RD LIBERTY, SC USA EX454 Sprinkler Identification Numbers () R1314, R1334, R1344, R1364, R4441, R4514, R4534, R6115 and RA4454 fusible element type. Chrome plated models identified by a black painted fusible link. Sprinkler Identification Numbers () R1711 (RA1311), R1713 (RA1313), R1715 (RA1314), R1712, R1721(RA1321), R1722, R1723 (RA1323), R1725 (RA1325), R1735 (RA1335), R1742, R1745 (RA2845), R1785 (RA1385), R3611 (RA1411), R3612, R3613 (RA1413), R3615 (RA1414), R3621 (RA1421), R3622, R3623 (RA1423), R3625 (RA1425), R3635 (RA1435), R3685 (RA1485), R4842, R4845,, R4865, R5314, R5334, R5512, R5515 (RA2514), R5522, R5525 (RA2525), R5612, R5615 (RA2614), R5622, R5714, R5734, R5842, R5845 (RA2945), R5942, R5945 (RA3045), R5962, R6834 (RA2634), R7022, R7025 (RA3125), R7092, R7095 (RA3195), RA0212, RA0362, RA1564, RA1664, RA7216, RA7326, RA2625, RA2745, RA2865, and RA4954 glass bulb type. Plated models identified by stake mark on wrench boss. Decorative baked enamel coated Models identified by a color code dot applied to the deflector. Sprinkler Identification Numbers () R1012, R1011, R1013, R1015, R1016, R1017, R1022, R1021, R1023, R1025, R1026, R1027, R1113, R1117, R1118, R1265, R1267, R1233, R1235, R1231, R1236, R1237, R1425, R1427, R1511, R1512, R1513, R1515, R1518, R2111, R2113, R2115, R2112, R2118, R2212, R2218, R3131, R3133, R4613, RA5114, R5413, R5415, R5418, R6115, R6118, R6215, R6218, R7146, R7216, R7326, RA0852, RA3411, RA3412, RA3413, RA3415, RA4014, RA4454, and RA5035 fusible element type. Chrome plated models identified by diamond shape stamped on boss of frame. Decorative painted sprinklers are identified by unplated or unpainted operating parts. Sprinkler Identification Numbers () R2921, R3111, R3113, R3115, R3117, R3121, R3123, R3125, R3127, R3135, R3137, R3195, R3197, R6043, R6553, R6932, RA1124 soldered strut type. Plated models identified by a small machined bronze area adjacent to the sprinkler seat and visible below the cap. Sprinkler Identification Numbers () RA3614, RA3624, RA3634, RA3914, RA3924, RA3934 Mini Link type. UPRIGHT AND PENDENT STANDARD SPRINKLERS NOMINAL 5.6 K - FACTOR System Working Pressure, psig Temp Rating, F R3115 QR, 212 R3615 QR 135, 155,,, 286 RA1414 QR , 155,,, 286 RA1425 QR Upright , 155,,, 286, 360 RA2614 QR , 155,,, 286 RA2625 QR Upright , 155,,, 286 R5615 QR , 155,,, 286 R3125 QR Upright, 212 R3625 QR Upright 135, 155,,, 286 R5625 QR Upright , 155,,, 286 R1715 SR 135, 155,,, 286, 360 RA1314 SR , 155,,, 286, 360, 500 RA1325 SR Upright , 155,,, 286, 360, 500 RA2514 SR , 155,,, 286, 360
2 Page 2 of 16 RA2525 SR Upright , 155,,, 286 R1015 SR 135,, 212, 286 R5515 SR , 155,,, 286 R1725 SR Upright 135, 155,,, 286, 360 R1025 SR Upright 135,, 212, 286 R5525 SR Upright , 155,,, 286, 360 RA3614* QR, 212 RA3624* QR Upright, 212 RA3914* QR 300, 212 RA3924* QR Upright 250, 212 * Quick Responsive Fusible Link (Mini Link). NOMINAL 1.4 TO 4.2 K FACTOR System Working Pressure, psig Temp Rating, F R3111 QR 2.8, 212 R3611 QR , 155,,, 286 R3113 QR 4.2, 212 R3613 QR , 155,,, 286 R3121 QR Upright 2.8, 212 R3621 QR Upright , 155,,, 286 R3123 QR Upright 4.2, 212 R3623 QR Upright , 155,,, 286 R1012 SR ,, 212, 286 R1011 SR ,, 212, 286 R1711 SR , 155,,, 286, 360 R1013 SR ,, 212, 286 R1713 SR , 155,,, 286, 360 R1022 SR Upright ,, 212, 286 R1021 SR Upright ,, 212, 286 R1721 SR Upright , 155,,, 286, 360 R1023 SR Upright ,, 212, 286 R1723 SR Upright , 155,,, 286, 360 RA1311 SR , 155,,, 286, 360 RA1313 SR , 155,,, 286, 360 RA1411 QR , 155,,, 286 RA1413 QR , 155,,, 286 RA1321 SR Upright , 155,,, 286, 360 RA1323 SR Upright , 155,,, 286, 360 RA1421 QR Upright , 155,,, 286 RA1423 QR Upright , 155,,, 286 NOMINAL 8.0 K FACTOR
3 Page 3 of 16 Inlet Thread NPT System Working Pressure, psig Temp Rating, F R3117 QR 3/4, 212 R3612 QR 3/4 135, 155,,, 286 R5612 QR 3/ , 155,,, 286 R3127 QR Upright 3/4, 212 R3622 QR Upright 3/ , 155,,, 286 R5622 QR Upright 3/ , 155,,, 286 R1016 SR 1/2 135,, 212, 286 R1017 SR 3/4 135,, 212, 286 R5512 SR 3/ , 155,,, 286, 360 R1712 SR Rec. 3/ , 155,, R1026 SR Upright 1/2 135,, 212, 286 R1027 SR Upright 3/4 135,, 212, 286 R1722 SR Upright 3/ , 155,,, 286, 360 R5522 SR Upright 3/ , 155,,, 286, 360 STANDARD SIDEWALL SPRAY SPRINKLERS System Working Pressure, psig Temp Rating, F R1334* QR Flush 5.6 R4534*+ QR Flush 5.6 R3131 QR 2.8, 212 R3133 QR 4.2, 212 R3635+ QR , 155,,, 286 RA1435+* QR , 155,,, 286 RA2634+* QR , 155,,, 286 R3135+ QR 5.6, 212 R3137 QR 8.0, 212 R3685 QR VSW , 155,,, 286, 300 RA1485 QR VSW , 155,,, 286, 300 R1231 SR ,, 212, 286 R1233 SR ,, 212, 286 R1233 SR R1235+ SR ,, 212, 286 R1735 SR , 155,,, 286, 360 RA1335 SR , 155,,, 286, 360 R1235+ SR R1236 SR ,, 212, 286 R1237 SR ,, 212, 286 R1785 SR VSW , 155,,, 286, 360 RA1385 SR VSW , 155,,, 286, 360 R6834*+@ QR , 155
4 Page 4 of 16 RA2634*+@ QR , 155 RA3634# QR Rec , 212 RA3934# QR Rec , 212 * For installation 4 to 12 in. below ceiling. + For ordinary hazard Utilizes a 135 F temperature rated cover plate. # Quick Responsive Fusible Link (Mini Link). FLUSH, RECESSED AND CONCEALED SPRINKLERS System Working Pressure, psig Cover Temp Rating F Sprinkler R5413# QR , RA3411# QR , RA3412# QR , RA3413# QR , RA3415# QR ,, 212, 212, 212, 212, 212 RA4014# QR RA4014# QR R5418# QR ,, 212 R6215# QR 5.6, 212 R6218# QR 5.6, 212 RA1414# QR , RA2614 QR , 135, 155,, 135, 155,, RA0212# QR , 155 RA5035#@ QR R1314 QR Flush 5.6 R4514 QR Flush 5.6 R3133 QR Rec. 4.2, 212 R3635 QR Rec , 155,, R1435 QR Rec , 155,, R3135 QR Rec. 5.6, 212 R3137 QR Rec. 8.0, 212 R3611 QR Rec , 155,, R3111 QR Rec. 2.8 R3613 QR Rec , 155,, R3113 QR Rec. 4.2
5 Page 5 of 16 R3115 QR Rec. 5.6 R3615 QR Rec , 155,, R1414 QR Rec , 155,, R2614 QR Rec , 155,, R3117 QR Rec. 8.0 R3612 QR Rec , 155,, R1511 SR R1512 SR R1511 SR 2.8, 212 R1512 SR 2.8, 212 R2111# SR , R2112# SR , R2111# SR 2.8, 212 R2112# SR 2.8, 212 R1513 SR R1513 SR 4.2, 212 R2113# SR , R2212# SR ,, 212 R2113# SR 4.2, 212 R1515 SR R1518 SR R1515 SR 5.6, 212 R1518 SR 5.6, 212 R2115# SR , R2118# SR , R2115# SR 5.6, 212 R2118# SR 5.6, 212 R2218# SR ,, 212 R6115# SR , R6118# SR , R1233 SR Rec R1235 SR Rec R1735 SR Rec , 155,, R1711 SR Rec , 155,, R1117 SR Rec ,, 212 R1011 SR Rec ,, 212 R1713 SR Rec , 155,,
6 Page 6 of 16 R1013 SR Rec ,, 212 R1113 SR Rec ,, 212 R1013 SR Rec ,, 212 R1715 SR Rec , 155,, R1015 SR Rec ,, 212 R1118 SR Rec ,, 212 RA1314 SR Rec , 155,, R1712 SR Rec , 155,, R1712 SR Rec , 155,, R1017 SR Rec ,, 212 R1016 SR Rec ,, 212 RA3614* QR Rec. and Con. RA3914* QR Rec. and Con , , The 5.6 may utilize a 1 in. adjustable feature with 1 in. male or female threads. * Quick Responsive Fusible Link (Mini Quick Responsive Fusible Link (BeNi Link). # pendent type sprinklers may utilize a perforated style cover plate. DRY SPRINKLERS Length Ft System Working Pressure, psig K- Factor Temp Rating, F R5314 SR , 155,,, 286 R5314 SR Rec , 155,,, 286 R5314 SR , 155,,, 286 R5714 QR , 155,,, 286 R5714 QR Rec , 155,,, 286 R5714 QR , 155,,, 286 RA5114 QR , 212 R5334 SR , 155,,, 286 R5334 SR Rec , 155,,, 286 R5734 QR , 155,,, 286 R5734 QR Rec , 155,,, 286 STANDARD RESPONSE (SR) - EXTENDED COVERAGE SPRINKLERS - LIGHT HAZARD Width (A) Ft Length (B) Ft Min Flow GPM Distance Below Ceiling In. Temp Rating, F R R
7 Page 7 of 16 R R1267, Rec R1267, Rec R1267, Rec R1745, Rec , 155 R1745, Rec , 155 R1745, Rec , 155 RA2745, Rec , 155 RA2745, Rec , 155 RA2745, Rec , 155 R1742, Rec , 155 R1742, Rec , 155 R1742, Rec , 155 R5845 Rec , 155 R5845 Rec , 155 R5845 Rec RA2945 Rec , 155 RA2945 Rec , 155 RA2945 Rec R5842 Rec R5842 Rec R5842 Rec (A) Dimension of wall on which sprinkler is installed. (B) Dimension perpendicular to wall on which sprinkler is installed. QUICK RESPONSE (QR) - EXTENDED COVERAGE SPRINKLERS - LIGHT HAZARD Width (A) Ft Width (B) Ft Min Flow GPM System Working Pressure, psig Distance Below Ceiling In. Temp Rating F Cover Sprinkler RA2845 RA2845 RA2845 RA2845 R5945 R5945 R5945 R5945 RA , , , , , , , , 155
8 Page 8 of 16 RA3045 RA3045 RA3045 R4842 R5942 R4842 R5942 R4842 R5942 R4441+# R4441+# R4441+# R7146+# R7146+# R7146+# R7146+# , , R R R , 155 R R R R RA RA1564 Rec, Conc , 155,, RA1564 Rec, Conc , 155,, RA1664 Dry Rec, Conc , 155,, RA1664 Dry Rec, Conc , 155,, R1364 Flush R1364 Flush R1344 Flush
9 Page 9 of 16 R4865 R4865 R4865 RA2865 RA2865 RA2865 RA0362 R4845 R4845 R4845 RA2845 RA2845 RA2845 R4842 R4842 R4842, Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec., Rec , 155, , 155, , 155, , 155, , 155, , 155, , 155, , 155, , 155, , 155, , 155, , , , , , , , , , , RA3045 Rec RA3045 Rec RA3045 Rec R5942 Rec
10 Page 10 of 16 R5942 Rec R5942 Rec R7216 R7216 R7216 RA7216 RA7216 RA7216, Rec., Rec., Rec., Rec., Rec., Rec , , , , , , R7326 Upright R7326 Upright R7326 Upright RA7326 Upright , RA7326 Upright , RA7326 Upright , May utilize a 1 in. adjustable inlet feature with 1 in. male threads. (A) Dimension of wall on which sprinkler is installed. (B) Dimension perpendicular to wall on which sprinkler is installed. # pendent type sprinklers may utilize a perforated style cover plate. STANDARD RESPONSE (SR) - EXTENDED COVERAGE SPRINKLERS - ORDINARY HAZARD Sin
11 Page 11 of 16 Width x Length Ft x Ft Ordinary Hazard Group Min Sprinkler Flow Rate GPM Temp F Rating R6043, Rec. 18x , 212 R6043, Rec. 18x , 212 R6043, Rec. 20x , 212 R6043, Rec. 20x , 212 R6553 Upright 20x , 212 R6553 Upright 20x , 212 R7216, Rec. 14 by , 212 R7216, Rec. 16 by , 212 R7216, Rec. 16 by , 212 R7216, Rec. 18 by , 212 R7216, Rec. 18 by , 212 R7216, Rec. 20 by , 212 R7216, Rec. 20 by , 212 RA7216, Rec. 16 by , RA7216, Rec. 16 by , RA7216, Rec. 18 by , RA7216, Rec. 18 by , RA7216, Rec. 20 by , RA7216, Rec. 20 by , R7326 Upright 14 by , 212 R7326 Upright 14 by , 212 R7326 Upright 16 by , 212 R7326 Upright 16 by , 212 R7326 Upright 18 by , 212 R7326 Upright 18 by , 212 R7326 Upright 20 by , 212 R7326 Upright 20 by , 212 RA7326 Upright 16 by , RA7326 Upright 16 by , RA7326 Upright 18 by , RA7326 Upright 18 by , RA7326 Upright 20 by , RA7326 Upright 20 by , QUICK RESPONSE (QR) - EXTENDED COVERAGE SPRINKLERS - ORDINARY HAZARD Sin Width x Length Ft x Ft Ordinary Hazard Group Min Sprinkler Flow Rate GPM Temp F Rating RA7216, Rec. 14 by , RA7216, Rec. 14 by ,
12 Page 12 of 16 RA7326 Upright 14 by , RA7326 Upright 14 by , R by R by R by R by R by R by R by R by CORROSION RESISTANT SPRINKLERS Coating Temp Rating, F R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Polyester, Teflon, Electroless Nickel 135, 155,, RA Polyester, Teflon, Electroless Nickel 135, 155,, RA1564 ECLH 5.6 Polyester, Electroless Nickel 155,, R Wax, Lead 135,, 212, 286 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Wax, Lead 135,, 212, 286 R Wax, Wax Over Lead, Lead 155,, R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Wax, Lead 135,, 212, 286 R Wax, Wax Over Lead, Lead 155,, R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA Polyester, HPET Nickel Plated, 212 R Wax, Lead 135,, 212, 286 R Wax, Wax Over Lead, Lead 155,, R Wax, Wax Over Lead, Lead 155,,
13 Page 13 of 16 RA Wax, Wax Over Lead, Lead 155,, RA Wax, Wax Over Lead, Lead 155,, R Wax, Wax Over Lead, Lead 155,, RA Wax, Wax Over Lead, Lead 155,, R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R Wax, Lead 135,, 212, 286 R Wax, Lead 135,, 212, 286 R Wax, Wax Over Lead, Lead 155,, R Wax, Wax Over Lead, Lead 155,, R Wax, Wax Over Lead, Lead, 212, 286 R1022 Upright 1.9 Wax, Lead 135,, 212, 286 R1721 Upright 2.8 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R3621 Upright 2.8 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R1021 Upright 2.8 Wax, Lead 135,, 212, 286 R1721 Upright 2.8 Wax, Wax Over Lead, Lead 155,, R1723 Upright 4.2 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R3623 Upright 4.2 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R1023 Upright 4.2 Wax, Lead 135,, 212, 286 R1723 Upright 4.2 Wax, Wax Over Lead, Lead 155,, R1725 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA1325 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R5525 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA2525 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R3625 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA1425 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R5625 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA2625 Upright 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R1025 Upright 5.6 Wax, Lead 135,, 212, 286 R1725 Upright 5.6 Wax, Wax Over Lead, Lead 155,, RA1325 Upright 5.6 Wax, Wax Over Lead, Lead 155,, R5525 Upright 5.6 Wax, Wax Over Lead, Lead 155,, RA2525 Upright 5.6 Wax, Wax Over Lead, Lead 155,, R1722 Upright 8.0 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R5522 Upright 8.0 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R3622 Upright 8.0 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R5622 Upright 8.0 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R1026 Upright 8.0 Wax, Lead 135,, 212, 286 R1722 Upright 8.0 Wax, Wax Over Lead, Lead 155,, R5522 Upright 8.0 Wax, Wax Over Lead, Lead 155,,
14 Page 14 of 16 R2921 Upright 11.2 Lead, Wax, Wax Over Lead, 212 R2921 Upright 11.2 Wax, Wax Over Lead, Lead 135,, 212, 286 R1785 VSW 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 RA1385 VSW 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286, 360 R3685 VSW 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 RA1485 VSW 5.6 Polyester, Teflon, Electroless Nickel 135, 155,,, 286 R5314 Dry-Pend 5.6 Wax, Wax Over Lead, Lead 155,, R5334 Dry- 5.6 Wax, Wax Over Lead, Lead 155,, R5314 Dry-Pend 5.6 Polyester, Electroless Nickel 135, 155,,, 286 R5334 Dry- 5.6 Polyester, Electroless Nickel 135, 155,,, 286 R5714 Dry-Pend 5.6 Polyester, Electroless Nickel 135, 155,,, 286 R5734 Dry- 5.6 Polyester, Electroless Nickel 135, 155,,, 286 RA1664 Dry- ECLH 5.6 Polyester, Electroless Nickel 155,, RA1124 Upright 16.8 HPET Nickel Plated, 212, 286 R Polyester, Electroless Nickel 155, R7326 Upright 11.2 Polyester, Electroless Nickel, 212 RA7326 Upright 11.2 Polyester, Electroless Nickel 155, HIGH TEMPERATURE, WAX COATED SPRINKLERS Ambient Temp, F Sprinkler Temp Rating, F R1012 SR R1011 SR R1511* SR R1013 SR R1513* SR R1015 SR R1515* SR R1715 SR RA1314 SR R1712 SR R1016 SR R4613* SR R1022 SR Upright R1021 SR Upright R1023 SR Upright R1025 SR Upright R1725 SR Upright RA1325 SR Upright R1026 SR Upright R1722 SR Upright
15 Page 15 of 16 R2921* SR Upright R5314 SR Dry R5334 SR Dry * Coating may be wax or wax over lead. INTERMEDIATE LEVEL SPRINKLERS Temp Rating, F R3615 QR , 155,,, 286 R QR , 155,,, 286 R3115+ QR 5.6, 212 RA1414 QR , 155,,, 286 R3612 QR , 155,,, 286 R3117+ QR 8.0, 212 R7095 QR Upright , 155,,, 286 R3195+ QR Upright 5.6, 212 R7092 QR Upright , 155,,, 286 R3197+ QR Upright 8.0, 212 R1015* SR ,, 212, 286 R SR , 155,,, 286 R1314 SR , 155,,, 286, 360 R1017* SR ,, 212, 286 R1425* SR Upright ,, 212, 286 R7025 SR Upright , 155,,, 286 R1427* SR Upright ,, 212, 286 R7022 SR Upright , 155,,, May be used with Model C-3 guard/shield (upright) or Model C-4 guard/shield (pendent). ++ May be used with Model C-5 guard/shield (pendent). * May be used with Model C-3 guard/shield (upright) or Model C-5 guard/shield (pendent). SPRINKLERS FOR STORAGE PROTECTION (CONTROL MODE DENSITY AREA) Temp Rating, F R2921 SR Upright 11.2, 212, 286 R4613 SR Penent 14.0, 212, 286 RA1124 SR Upright 16.8, 212, 286 EXTENDED COVERAGE SPRINKLERS FOR STORAGE PROTECTION (CONTROL MODE DENSITY AREA) Width x Length Ft x Ft Temp Rating, F RA0842 SR 12 x , 212 RA0842 SR 14 x , 212
16 Page 16 of 16 These sprinklers have not been investigated for use as a Control Mode Specific Application (CMSA) sprinkler in accordance with Chapter 21 of NFPA 13. SPRINKLERS FOR STORAGE PROTECTION (CONTROL MODE SPECIFIC APPLICATION) Temp Rating, F R SR 14.0, The sprinkler is intended for use in metal buildings with a building height of 22 through 32 ft with a maximum slope of 2/12 in./in. and the deflector below the underside of the roof between 12 and 16 in. When acceptable to the Authority Having Jurisdiction and the manufacturers installation instructions are sprinkler may be installed in accordance with the Discharge Criteria for Miscellaneous Storage and Commodity Class I through IV, Group A plastic storage, Miscellaneous tire and rolled paper storage and idle pallet storage height 12 ft or less in height in accordance with NFPA 13, when a minimum storage to deflector clearance of 10 ft is maintained. SPECIFIC APPLICATION SPRINKLERS Space Sprinklers Height of Space, in. Min Coverage Area, ft 2 Temp Rating, F RA4954+ ** QR Upright RA4954+ ** QR Upright RA ** QR Upright 6* RA4454+ ** QR Upright RA4454+ ** QR Upright RA ** QR Upright 6* * Minimum distance between upper and lower joists. ** May be used for dry pipe systems using steel pipe exclusively. + For use in light hazard flat concealed spaces incorporating noncombustible or wood truss construction. The Manufacturer's Installation and Design Parameter Instructions should be consulted for specific installation parameters, obstruction criteria and hydraulic design requirements. ++ For use in combustible solid wood joist construction. Last Updated on Questions? Print this page Terms of Use Page Top 2016 UL LLC The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2016 UL LLC".
concealed sprinkler cover plate assemblies
Page of 5. DESCRIPTION Viking Plates are low-profile covers used with Viking Concealed s. The covers are installed flush with the ceiling or wall to provide a smooth appearance, are available in several
UOXX.S3403 Control Unit Accessories, System. Control Unit Accessories, System
UOXX.S3403 - Control Unit Accessories, System UOXX.S3403 Control Unit Accessories, System Page Bottom Print-friendly version Questions? Control Unit Accessories, System See General Information for Control
I-VICFLEX.VS1. Victaulic VicFlex Style VS1 Dry Sprinkler WARNING WARNING TECHNICAL DATA BEND CHARACTERISTICS INSTALLATION INSTRUCTIONS SIDEWALL
INSTALLATION INSTRUCTIONS I-VICFLEX.VS1 Victaulic VicFlex Style VS1 Dry Sprinkler SIDEWALL Y Read and understand all instructions before attempting to install any Victaulic VicFlex Style VS1 Dry Sprinklers.
Section D Storage Sprinklers
Section D Storage Sprinklers TABLE OF CONTENTS Control Mode Specific Application VK520 / VK500, 14.0 (202) K factor,, upright / pendent...d-1 VK503, 16.8 (242) K factor,, pendent...d-1 VK510, 25.2 (363)
COMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
BXUV.V470. Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263
Page Bottom BXUV.V470 Fire Resistance Ratings - ANSI/UL 263 Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements
UL Online Certifications Directory
UL Online Certifications Directory Home Quick Guide Contact Us UL.com TGFU.R27358 Roofing Systems Page Bottom Roofing Systems See General Information for Roofing Systems PROGRESSIVE MATERIALS L L C 540
THE CHURCH OF J ESUS CHRIST OF LATTER-DAY SAINTS BISHOPS' STOREHOUSE THE CHURCH OF OF LATTER-DAY SAINTS HOME STORAGE CENTER BISHOPS' STOREHOUSE
231 THE CHURCH OF J ESUS CHRIST OF LATTER-DAY SAINTS BISHOPS' THE CHURCH OF BISHOPS' HOURS Monday-Friday P.M. - X:00 A.M. X:00 Saturday P.M. - X:00 A.M. X:00 J ESUS CHRIST OF LATTER-DAY SAINTS HOME STORAGE
Installation Instructions
Contemporary Square Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
Installation Instructions
Contemporary Round Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
METAL METAL
12654 - METAL 12654-1 PART ONE: GENERAL METAL 1.1 Architectural metals shall be of the best commercial quality and their various forms shall be straight and true. There shall be no scratches, scars or
ANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
FITTINGS AND HOSES TOOL
FITTINGS AND HOSES INGERSOLL-RAND FITTINGS AND HOSES The Ingersoll-Rand line of ruggedly convenient hose reels and recoil hoses are pressurerated for optimized pneumatic performance, even in the toughest
SECTION THERAPEUTIC POOL ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 13 17 23.11 THERAPEUTIC POOL ACCESSORIES SPEC WRITER NOTES: Delete between // // if not applicable to project. Also, delete any other item or paragraph not applicable
Code Compliance Research Report CCRR-0155
Code Compliance Research Report CCRR-0155 Issue Date: 03-25-2011 Revision Date: 04-18-2018 Renewal Date: 03-26-2019 DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES Section: 06 63 00 Plastic Railings REPORT
A. Product Data: For each electrical identification product indicated.
SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Wilsonstak. library bookstacks general specifications. Wilsonstak
Wilsonstak library bookstacks general specifications Wilsonstak Scope This specification covers delivery and installation of Steel Bookstack Shelving of the bracket type only. Unit heights, depths and
UL 580 Construction No: ½ in Snap Lock w/ Clip
Test Type: Testing Authority: Test Name: UL 580 Construction No: 589 Underwriters Laboratories Wind Uplift Test Date: Test Completed By: Testing Laboratory Type: Width: Clip Spacing: Decking Construction:
This specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
Rod probe With coaxial tube reference probe
Capacitive level transmitters GENERAL DESCRIPTION NIVOCAP 2-wire capacitive level transmitters provide an ideal solution for level measurement of conductive or non-conductive liquids. The probe of the
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
This Manual Part recommends design criteria for resistors suitable for railway signaling circuits other than electronic.
2016 Part 14.2.15 Recommended Design Criteria for Resistors Revised 2016 (6 Pages) A. Purpose z00381hn 3/12/15 8:34 AM z00381hn 3/12/15 8:37 AM This Manual Part recommends design criteria for resistors
C. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
UL 580 Construction No: ½ in Mechanical Lock w/ Clip
Test Type: Testing Authority: Test Name: UL 580 Construction No: 588 Underwriters Laboratories Wind Uplift Test Date: Test Completed By: Testing Laboratory Panel Type: Greg Rezek Underwriters Laboratories
800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
WATER METERS M SERIES WATER METERS INSTALLATION, OPERATION AND MAINTENANCE GUIDE METAL M SERIES WATER METER PLASTIC M SERIES WATER METER
WATER METERS M SERIES WATER METERS INSTALLATION, OPERATION AND MAINTENANCE GUIDE METAL M SERIES WATER METER PLASTIC M SERIES WATER METER INTRODUCTION M SERIES WATER METERS INDUSTRY S SMALLEST WATER METERS
Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
Residential Construction Checklist Single and Two Family Construction
DATE: _ Building Inspection Submittal Requirements Residential Construction Checklist Single and Two Family Construction Submit a City of Big Spring Permit Application, checklist, and 3 complete hard copy
Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
ROHS DECLARATION OF CONFORMITY
ROHS ELARATION OF ONFORMITY We ABB Entrelec onnection ivision 184 rue Léon Blum 69100 Villeurbanne France eclare that the product listed below fully comply with the provisions of EU irective(s) 2002/95/E
1. ASME A Scheme for the Identification of Piping Systems.
SECTION 40 05 53 - IDENTIFICATION FOR PROCESS PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Labels. 6. Lockout devices. B. Related Requirements:
System 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
ALLOY STEEL SOCKET SET SCREWS 1
1 IFI NOTE: - is reprinted with permission from the Annual Book of ASTM Standards, copyright American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A,
Traditional Wall Mounted Potfiller
TOOLS NEEDED FOR INSTALLATION 1/4 hex wrench (provided in installation kit) 3/32 hex wrench (provided in installation kit) Pencil or marker PTFE tape Small level, or carpenters square Power Drill with
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels 1
Designation: D 823 95 (Reapproved 2001) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels 1 This standard is issued under the fixed designation
QIJQ2.E Connectors for Use in Photovoltaic Systems - Component. Connectors for Use in Photovoltaic Systems - Component
2. Connector QIJQ2.E343181 - Connectors for Use in Photovoltaic Systems - Component 페이지 1 / 2 QI JQ2.E343181 Connectors for Use in Photovoltaic Systems - Component Page Bottom Connectors for Use in Photovoltaic
Elco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
Symphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
THREADING MACHINES & REPLACEMENT PARTS PRODUCTION PIPE FABRICATION EQUIPMENT PORTABLE ROLL GROOVERS PIPE STANDS
www.edcos.com THREADING MACHINES & REPLACEMENT PARTS RIDGID THREADING MACHINES RIDGID DIES REPLACEMENT PARTS FOR RIDGID 300 ROTHENBERGER PIPE FABRICATION EQUIPMENT REPLACEMENT PARTS FOR RIDGID 700 DIES
Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
TECH BULLETIN SIP No Subject: Fire Resistive Assemblies Date: November 2007 (Revised May 2017) Roof/Ceiling: 1-Hour Rating
TECH BULLETIN SIP No. 2018 Subject: Fire Resistive Assemblies Date: November 2007 (Revised May 2017) ASTM E 119 (UL 263) tests have been conducted on R-Control SIPs to develop fire resistance assemblies.
FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
CertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS. Fence Installation Guide 3', 4' & 6' High
CertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS Fence Installation Guide 3', 4' & 6' High INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers
LINEAR DIFFUSERS AND BAR GRILLES
Model 49-240 Model 48LL1 Model 49-280 Model 49-480 Model 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance.
FT DIX ELEMENTARY SCHOOL PHASE VII, CLASSROOM ADDITION PEMBERTON TOWNSHIP REGAN YOUNG ENGLAND BUTERA, PC PROJECT #5349A
SECTION 061050 - MISCELLANEOUS CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
METALWORKS Concealed. Installation Instructions
METALWORKS Concealed Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks Concealed ceilings consist of perforated and unperforated panels that are downward accessible, and are designed
Series 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
TURBOTWISTER TM ASSEMBLY AND INSTALLATION INSTRUCTIONS
TURBOTWISTER TM ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503)
TURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS
TURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503) 266-4334
SECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
Contemporary Collection
HZ5E Gas Fireplace Model HZ5E-NG1 HZ5E-LP1 Fuel Type Natural Gas Propane Gas Minimum Supply Pressure 5 W.C.(1.5 kpa) 1 W.C. (.98 kpa) Manifold Pressure - High 3.5 W.C. (.87 kpa) 1 W.C. (.9 kpa) Manifold
TURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS
TURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503) 266-4334
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
STANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
SECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
THE ROGUE TM FUNSLIDE TM
THE ROGUE TM FUNSLIDE TM ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH ROGUE TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND POOLS ONLY. ROGUE
Polished Brass. Stainless Steel
Specifications Thermoset SP Series Nylon TP Series Screwless Polycarbonate SWP Series 302/304 Stainless Steel Polished Brass Brushed Brass Aluminum Application Legrand's broad line of Pass & Seymour Size
Lamp Parts. H - 1 Order Toll-Free Fax Toll-Free Internet:www.glassplace.com
800-1503 800-1507 800-1504 800-1505 Die Cast Loops These loops are available in a variety of finishes. Just add the letters after the loop number to obtain the finish you want. 800-1506 800-1508 800-1560
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
SECTION PLUMBING FIXTURES
SECTION 224000 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes 1. Faucets for lavatories and sinks. 2. Flushometers. 3. Toilet seats. 4. Protective shielding guards. 5. Fixture
SECTION MECHANICAL IDENTIFICATION
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe Markers. 1.02 SUBMITTALS A. Submit valve chart and schedule,
DesignRail Kits. Modular Aluminum Railing System
DesignRail Kits Modular Aluminum Railing System Feeney makes it easy Create beautiful railings inside and out with DesignRail Kits. Installation is fast and easy with our modular kits and CableRail stainless
Procedure for Wrench Calibration and Snug Tightening
Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure
Drilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
DRAFT V. SITE ELEMENTS SIGNS
1. SIGNS Intent Signs are an important streetscape design element that affect not only the visual character of the Historic District but also the vitality of its businesses. Signage provides business identification,
UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
B. Manufacturers: Square-D, G.E. or Westinghosue.
SECTION 16470 - PANELBOARDS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. General: Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
INSTALLATION GUIDELINES
STYLE No. DSXS20 with 8 Shower Head and Metal Cross Handles STYLE No. DSXS2C System with Metal Cross Handles STYLE No. DSXS30 with 8 Shower Head, Metal Lever and Cross Handle STYLE No. DSXS3C System with
The maximum back wall height is eight-feet three-inches (8 3 ), including truss, and is allowed only in the rear half of the booth space.
Linear Booth: A standard/linear (10 x10 ) booth (also called in-line booth ) is any booth that shares a common back wall and adjoins other exhibits on one or two sides. NOTE: A booth that is 10 ft. in
Supervisor s Checklist (Handling/Installation/Inspection of Roof Framing)
Supervisor s Checklist (Handling/Installation/Inspection of Roof Framing) Development Regulations 2008 Notice pursuant to Regulation 74 of the Development Act 1993 Development Application Number: Address
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
THIS PAGE INTENTIONALLY LEFT BLANK
THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge
ECOVENT USA CHIMNEY MODEL EV-SHT 5"-8" DIAMETER INSTALLATION INSTRUCTIONS
ECOVENT USA CHIMNEY MODEL EV-SHT 5"-8" DIAMETER INSTALLATION INSTRUCTIONS A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS
PRODUCT INFORMATION. ASTM B633,SC1, Type III (Fe/Zn 5) Rod/Anchor Diameter
PRODUCT INFORMATION Internally Threaded Expansion Anchor PRODUCT DESCRIPTION The is an all-steel, machine bolt anchor available in carbon steel. It can be used in solid concrete, hard stone, and solid
US RACK, Inc Falcon Drive, Madera, CA
US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for MOTORCYCLE RACK with Cradling Wheel Chocks WARNING: Do NOT attempt to install or use this rack without following all instructions.
EVALUATION REPORT GAF Materials Corporation 1361 Alps Road, Building 7-3 Wayne, NJ 07470
EVALUATION REPORT GAF Materials Corporation 1361 Alps Road, Building 7-3 Wayne, NJ 07470 EXTERIOR RESEARCH & DESIGN, LLC. 353 CHRISTIAN STREET, UNIT #13 OXFORD, CT 06478 PHONE: (203) 262-9245 FAX: (203)
TYPE "B" GAS VENT. Do not connect gas vent to a solid or liquid fuelled appliance or any appliance requiring a chimney.
TYPE "B" GAS VENT SD (sizes 3", 4", 5", 6", 7") INSTALLATION INSTRUCTIONS Type "B" Gas Vents are strictly for interior or enclosed exterior use or exterior use above a roof line. Read vent and appliance
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Square Free Standing Floor Mount Tub Filler Model D35900900 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully
COMPOSITE SIDING INSTALLATION GUIDE
CENTURY HOME LIVING COMPOSITE SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes,
SUBMITTAL REQUIREMENTS FOR COMMERCIAL BUILDING PROJECTS
SUBMITTAL REQUIREMENTS FOR COMMERCIAL BUILDING PROJECTS When submitting your application for Commercial projects please include the following: 1. Completed Building Permit Application with page 2 stamped
SECTION IDENTIFICATION OF HVAC PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 23 05 53 IDENTIFICATION OF HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00 Common
Unit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
THE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
Floor Boxes. Concealed Service Floor Boxes. Engineering Data 663 Series. Faces Plates for 663 Floor Box. 663 Series Floor Box
Concealed Service Floor Boxes 663 Series Floor Box 663-SC Multiple service floor box that delivers power, communications and data from standard conduit with no exposed service fitting Result: Open office
Multi-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Division 01 Specification
Never fill any required clearance space with insulation or any other building materials surrounding the chimney.
INSTALLATION AND MAINTENANCE INSTRUCTIONS 1700ºF Air-Cooled Temp/Guard Chimney Sizes 8-16 Listing No. MH8251 Tested to UL103/ULC-S604 A MAJOR CAUSE OF RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCE
ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 9 Ventilation Overview Revised
Truck Module Page 1 of 9 INTRODUCTION Each firefighter must have a thorough knowledge of the proper methods used to ventilate a structure. Ventilation itself does not put out fires! However, effective
Hardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Annexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs
Product Descriptions and Codings Adaptors and Reducers The AD-U series adaptors and RD-U series reducers each comprise a metallic, hexagonal, hollow body with an external male thread and an internal female
PREPARATION & TOOL CHECK LIST
INSTRUCTION MANUAL RAILING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG RAILING PRODUCTS WILL LAST.
At Larsen we want our customers to be confident they can find the right antenna for the right
MOBILE ANTENNAS At Larsen we want our customers to be confident they can find the right antenna for the right application. For this reason, we have provided some guidelines for mobile antenna selection.