Adamus HT Newsletter Q4/16

Transcription

1 Adamus HT Newsletter Q4/16 This issue: The Newest products & upgraded Save time and money with ADAMUS HT state-of-the-art tablet compression products: TI-2 Adamus HT Tool Inspector measuring machine new generation PD s series Adamus HT Automatic Compression Tooling Polishing Machines Adamus HT ONE Station Tablet Press Adamus HT Digital Camera for Pharma Industry Adamus HT Ultrasonic Cleaners Adamus HT Tool Inspector TI-2 TI-2 This is a newest generation of precise system for automated dimensioning of punches and dies, which is based on the latest technological developments in the field of micrometer measurements. The patented algorithm for combining the simultaneous measurement of the synchronous movement in the XY plane, allows the determination of the geometric parameters of the most complex pressing parts. Moreover, the presence of a dedicated video system with a resolution of 5M pixels, allows for the facilitation of optical Quality Assessment of the tools, and opens the path to perform the automatic dimensioning of multi-tip punches and dies. Basic parameters of the new measuring machine Fully automatic measurement, regardless of the complexity of the tool

2 Non-contact measurement with a resolution of 0.001mm for punches Non-contact measurements of die bore wearing with a resolution of 0.001mm Camera with autofocus and 5M pixels resolution with illuminator with controllable power and wavelength Dedicated, built-in controller of the measuring machine with communication interface USB 2.0 Basic properties of software Open-architecture application coded in.net Framework 4.5 technologies The ability to run on any PC with Windows 7 and above Easy and intuitive interface Automatic load of the CAD files for the measured tooling Saving protocols, the possibility of personalization and export to Excel or PDF View from the camera with a maximum resolution with the possibility of controlling the position of the punch / die under the camera by using the Space Mouse; record of the image to a file Pairing of punches function Break line or engraving height measurement Multilingual application with the ability to quickly add another language Open architecture allows for expansion of measuring capabilities of the machine by installing new measurement libraries What measurements are possible? The machine is supplied with the basic measurement libraries that enable automatic sizing of single tipped punches and dies of the following standards: EURO-B, EURO-D, TSM-(IPT)-B, TSM-(IPT)-B2, TSM-(IPT)-D, FETTE EU1 441, PHARMA, 20/28, ST-328-2, 25/32. 25/32 SLOTTED In the case of punches, the basic library enables the automatic measurement of geometrical sizes of the following: the total height, L0, working height L1, depth of convex (L0 - L1), longer and shorter dimensions A and B of the shape tooling or diameter D for the round tooling, shaft diameter d1, d2 and the head diameter d3. Possible singe, dual and triple tips measurement. In the case of dies, the basic library enables the automatic measurement of the profile of the inner die bore with the determination of the difference between the minimum and maximum value

3 Measuring library for special cases of single tip and multi-tip punches and dies are made on request and delivered as a single installation file that expands the functionality of the measuring machine Dedicated holders for dies & worn out punches heads PD series Adamus HT Tooling Polishing Machines Polishing machines of our design allow for polishing of up to 80 EU19 (B) format punches and up to 60 EU1 (D) format punches in an automatic cycle. The holders are designed to hold a complete set of upper or lower punches and 48 EU19/EU1 (D) dies from the most frequently use dimensions of production tablet presses. There are 3 types polishers available regarding amount of holders for tools. Our system uses a well-known and tested method of dry polishing with the use of polishing granulate and paste. Holders with punches are immersed in and rotated around a hopper filled with a polishing medium. This is comprised of a carefully selected polishing paste that contains aluminum oxide blended with walnut shells or a granulate of fine plastic spheres. Adamus HT ONE Station Tablet Press The One Station Tablet Press is a perfect solution for small manufacturing or every research and laboratory purpose where small amounts of tablets or samples are needed for trials. It allows adjustment of the tablet parameters to fulfill production requirements

4 without the loss of expensive granulate and without taking the time of industrial tablet presses for testing. Utility benefits: Multilayer tablet possibility Transparent shields for safety reasons Tablet ejection rod Stainless steel frame and parts Digital display indicating pressing force & ejecting force No operators force needed to compress a single tablet Hydraulic pressure gauge Easy cleaning of unit after using granulate Control of tablet parameters Easy access to compression chamber Technical features: Maximum pressing force: up to 100 kn Maximum depth of the filling: 20 mm Maximum tablet diameter: 25mm Supports standards EUB, EUD (H=133,6) Digital controller for compression pressure and upper punch withdrawal for tablet ejection Power supply 230V 50Hz/ 110/60Hz Adamus HT Digital Camera for Pharma Industry With the use of the digital camera, cutting-edge optics, a brand new 5 megapixel sensor and several special features, the Adamus HT is a marvel of technology and the best choice for the high-demanding pharma professional. The camera offers superb image quality and color reproduction in a robust, compact and appealing housing. Dedicated software with wide range of measuring possibilities. Main features: 5 Megapixel EDGE sensor Magnification up to 220 times

5 Extended Depth of Field (EDOF) - feature automatically stacks images at different focus level to improve the depth of field on rough or uneven surfaces of tablets or punches tips Extended Dynamic Range (EDR) - the details of darker or brighter areas within the object can be revealed by stacking images at different exposure levels. Automatic Magnification Reading (AMR) - with the built-in functionality measurements can be performed easily and quickly. Adjustable polarizer - Because of the built-in polarization filter this model is ideal when working with shiny or reflective objects such as punch tips, Aluminium housing Extensive measurement functions Exchangeable front caps Flexible-LED-Control (FLC) Dedicated software with wide range of possibilities and picture Adamus HT Ultrasonic Cleaners Using an ultrasonic bath enables to achieve the maximum cleanliness in shorter time than applying of the traditional methods. Ultrasounds clean very effectively due to very intensive cavitation that does not harm the cleaned tooling or parts. The thousands of small cavitation spots (micro bubbles) are formed in water with the diluted cleaning agent. Their implosions cause the local, fast pressure which separate the dirt particles from the surface of the cleaned object. In such a way a very effective cleaning of the any surface or object immersed in the cleaner tank is possible without a necessity of the surface scrubbing. ADAMUS HT supplies different sizes of the ultrasonic cleaners with the special holders adopted for very effective compression tooling and other parts cleaning.

6 The offer includes special sonication fluids and rust inhibitors. Features: Self-explanatory symbols and well recognizable parameters LED Display showing both the Target and Actual Values C Heater, thermostatically adjustable, with LED-display for target value and actual value of temperature Optical signal in case of excess temperature Timer for the countdown and continuous operation DEGAS: adjustable pulse sound level for removing unwanted air bubbles, visible at LCD display Automatic short-time ultrasound during heating Process for permanent sound field oscillation ensures even and gentle cleaning Automatic safety shut-down 12 hours after last keypress ADAMUS ultrasonic range: 3 solutions of baths and holders for different type of punches and dies: - USC - 18a: maximum tank volume 18,7 ltr (4,94 US gal) - USC - 28a: maximum tank volume 28 ltr (6 US gal) - USC - 45a maximum tank volume 45 ltr (11,88 US gal) Contact details: Sales Department: marketing@adamus.com.pl Adamus HT official website: