Fluke TiR Series Thermal Imagers

Transcription

1 Fluke TiR Series Thermal Imagers Find building problems faster. IR-Fusion Technology infrared and visual images fused together makes infrared easy to understand Designed especially for building and restoration applications Rugged, reliable, easy to use what Fluke tools reputation has been for over 50 years Models for any application and budget

2 Locate building problems quickly and easily Fluke TiR Series Thermal Imagers are built specifically for the building diagnostic industry. Property managers and facility managers use thermal imaging to protect investments and keep buildings in a well maintained, healthy state. Restoration professionals are using thermal imaging to increase their business, differentiate themselves from their competitors and generate documentation in case they need to defend a future liability claim. Typical thermal imaging building applications: Thermal imaging is an efficient, nondestructive testing method to detect (potential) problem areas such as: Moisture intrusion in roof systems, walls, flooring, ceilings and other building areas Leaks in water pipes, buried steam lines, water lines or underground heating systems and sprinkler systems Missing or inadequate insulation areas Heat or cooling loss, HVAC/R problem areas Connection problems in low voltage electrical systems Termite and pest issues Construction failure areas Moisture detection: Accurately detect moisture behind interior walls, in ceilings, and under carpets. Mold remediation: Control mold by revealing undetected sources of moisture Roofing: Detect water-saturated insulation in flat-roof systems to locate damaged portions of roofing structure. 2 Energy audits: Perform residential and commercial energy audits by scanning for heating or cooling (energy) loss, moisture invasion, and HVAC/R problems.

3 IR-Fusion Technology* Full (traditional) IR Full screen infrared view for maximum infrared detail. IR-Fusion - Multiple viewing modes Identify problems quickly using different on-screen modes the user selects the mode that works best for each situation. While some viewing modes are not included in every model, all are available for viewing and analysis in the included free SmartView software. See things both ways Infrared and visual (visible light) images fused together communicating critical information faster and easier traditional infrared images are no longer enough. Patent-pending IR-Fusion Technology, pioneered by Fluke, simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. Images enhanced with IR-Fusion help identify and locate problems enabling repairs to be done right the first time. IR-Fusion images are also extremely effective when communicating findings to a customer, insurance company or the person who will be performing the repairs. Picture-in-Picture Creates an IR window surrounded by a visual (visible light) frame to easily identify problems, while maintaining a frame of reference with surroundings. IR/visible alarm For displaying only temperatures that fall above, below, or in between a specified range as IR image, leaving the rest of the scene as a fully visible light image. *Patent-pending IR-Fusion Technology from Fluke links the infrared image to full visual (visible light) image automatically. No need to carry a digital camera or spend additional time and energy to manage the infrared and visual images. IR-Fusion links the two together so image management is effortless. Alpha/Automatic Blend A blend of the visual (visible light) and infrared image together to create a single image for optimal viewing. Easy menu options give you access the different blending options from full thermal image to full visual image. Automatic blend provides enhanced detail to help locate problems precisely along with a visual frame of reference and helps to better focus the image. Full visible light A bright, detailed pixelfor-pixel reference image of subject areas for documentation and reporting. 3

4 Fluke TiR1/R Thermal Imagers Optimized for building envelope inspection, restoration and remediation and roofing applications. The new Fluke TiR1 and TiR Thermal Imagers are the perfect imagers for any building application. Enhanced problem detection and analysis capabilities with patentpending IR-Fusion Technology only available from Fluke. Optimized for tough environments - Engineered and tested to withstand a 2 meter drop - Withstands dust and water tested to an IP54 rating Delivers the clear, crisp images needed to find problems fast - Identify the smallest temperature differences common in building and roofing applications with their optimized thermal sensitivity (NETD) - High performance, low noise sensor provides high quality image and stable temperature reading - Even the smallest details become visible with the large, widescreen full color LCD display Intuitive, three-button menu is easy to use simply navigate with the push of a thumb. No need to carry pen and paper record findings by speaking into the camera voice annotation comments are saved with the image. (TiR1 only) Store more than 3,000 screen images (.bmp format) or 1,200 IR-Fusion images on included 2 GB SD memory card. 2 GB SD memory card slot Protective lens cover Visual camera lens Large, landscape format LCD display Speaker for sound and voice annotation playback Microphone for voice annotation Picture-in-picture, full IR or blended high-quality image AC adapter terminal Focus ring Image capture trigger Thermal imager lens Easy to use three-buton menu Rugged, withstands 2 m drop Wrist strap (adjusts for right or left handed use) 4

5 Fluke TiR1/R specifications Fluke TiR1 Fluke TiR Thermal Imaging performance Field of View (FOV ) 23 horizontal x 17 vertical Spatial resolution (IFOV) 2.5 mrad Minimum focus distance 15 cm Thermal sensitivity (NETD) 0.07 C at 30 C (70 mk) 0.1 C at 30 C (100 mk) Minimum span (Auto/Manual) 5 C / 2.5 C 5 C / 2.5 C Focus Manual Detector size 160 x 120 Visual imaging performance Minimum focus distance 46 cm On camera operating modes Picture-in-Picture (Blending is user selectable between MAX, MID and MIN) and full screen IR (Blending is user selectable between MAX, MED and MIN) Full Picture-in-Picture and full screen IR Visual (Visible light) camera 640 x 480 pixels, full color Temperature measurement Temperature range -20 C to +100 C, 2 ranges -20 C to +100 C Accuracy ± 2 C or 2 % (whichever is greater) ± 5 C or 5 % (whichever is greater) Measurement modes Center point and hot and cold markers Center point On-screen emissivity correction No Image presentation Digital display 9.1 cm diagonal landscape color VGA (640 x 480) LCD LCD backlight Selectable bright or auto Palettes Ironbow, blue-red, high contrast, amber, Ironbow, blue-red, high contrast, grey hot metal, grey Image and data storage Fully radiometric Storage medium 2 GB SD card stores up to 3000.bmp IR images or 1200.IS2 IR-Fusion images File formats supported Exportable to JPEG, BMP, GIF, PNG, TIFF, WMF EXIF, and EMF Voice memo recorder No (voice annotation) Software Controls and adjustments Software SmartView ; Full analysis and reporting software included Set-up controls Date/time, C/ F, language, emissivity, hot spot and cold spot on image Date/time, C/ F, language Language selection English, German, French, Spanish, Portuguese, Italian, Swedish, Finnish, Russian, Czech, Polish, Turkish, Simplified Chinese, Traditional Chinese, Korean, Japanese Image controls Smooth auto scaling and manual scaling On-screen indicators Battery status, real time clock and center point temperature, range and span indication and high and low alarm settings Power Battery type Internal rechargeable battery (included) Battery operating time 3 to 4 hours continuous operation Battery charging 2 hours with ac charger or dc car charger (charges battery while operating) AC operation AC adapter/charger 110/230 V ac, 50/60 Hz Power saving Automatic shutdown and sleep modes (user specified) Environmental and mechanical design Operating temperature -10 C to +50 C Storage temperature -20 C to +50 C Relative humidity Operating and storage 10 % to 90 %, non-condensing Water and dust resistant IP54 Two meter (6.5 feet) drop test Protective lens cover Weight (including battery) 1.2 kg Imager size (HxWxD) 267 mm x 127 mm x 152 mm Other Warranty Two-years EN nd edition and EN

6 TiR4FT, TiR3FT and TiR2FT IR FlexCam Thermal Imagers The experts choice for building diagnostics The Fluke TiR4FT, TiR3FT and TiR2FT IR FlexCam Thermal Imagers are for professionals demanding the best and most thorough solution in building diagnostics applications Enhanced problem detection and analysis capabilities with patent-pending IR-Fusion Technology only available from Fluke. View crisp, clear images on large LCD screen Industry leading thermal sensitivity ( 0.05 C NETD on TiR4FT) ( 0.07 C NETD on TiR3FT and TiR2FT) provides solid resolution and ultra high-quality images. Easily view around obstructions with the 180 articulating lens Exceptional image resolution delivered with 320 x 240 focal plan array and 20 mm high quality germanium lens on TiR3FT and TiR4FT models (TiR2FT available with 160 x 120 FPA) SmartFocus allows for easy one finger continuous focus Generate fast, easy customizable reports with included SmartView software Intuitive, easy to use operation with Windows CE interface. Light (torch and flash) for working in dark areas Laser Visible (visual) light lens Mouse/joystick controller Compact Flash memory card slot Mouse-click (select) button Menu button High precision Germanium (infrared) lens Trigger button RCA video output port Programmable function buttons Power on/off Large landscape display Automatic level/ span adjustments Hand strap 6

7 Fluke TiR4FT, TiR3FT and TiR2FT specifications TiR4FT TiR3FT TiR2FT Imaging performance Thermal Field of view (FOV)* 23 horizontal x 17 vertical Spatial resolution (IFOV)* 1.30 mrad 2.60 mrad Minimum focus distance* 0.15 m Thermal sensitivity (NETD) 0.05 C at 30 C 0.07 C at 30 C Detector data acquisition / 60 Hz 30 Hz Image frequency Focus SmartFocus; one finger continuous focus IR digital zoom 2x, 4x, 8x 2x Detector type Focal Plane Array (FPA) Uncooled Microbolometer Detector size 320 x 240 FPA 160 x 120 FPA Spectral band 8 μm to 14 μm Digital image enhancement Automatic full-time enhanced Visual On camera operating modes Full thermal, full visual light or merged thermal-visual images. Picture-in-picture. Alarm. Visible light camera 1280 x 1024 pixels, full color (1.3 Mega pixel) Visible light digital zoom 2x, 4x 2x Temperature measurement Calibrated temperature range -20 C to 100 C Accuracy ± 2 C or 2 % (whichever is greater) Measurement modes TiR2FT/TiR4FT - Centerpoint, center box (area min/max, average) moveable spot, TiR3FT - Centerpoint, center box (area min/max, average) Emissivity correction 0.1 to 1.0 (0.01 increments) Image presentation Digital display 5 large high-resolution digital display LCD backlight Sunlight readable color LCD Video output RS170 EIA/NTSC or CCIR/PAL composite video Palettes Grayscale, grayscale inverted, blue red, high contrast, hot metal, iron, amber, amber inverted Optional lens 10.5 mm wide-angle lens High precision Germanium lens Field of view (FOV) 42 horizontal x 32 vertical Spatial resolution (IFOV) 2.45 mrad 4.9 mrad Minimum focus distance 0.3 m Image and data storage Storage medium Compact flash card stores more than 1000 IR images (512 MB card standard) File formats supported 14 bit measurement data included. Exportable BMP, GIF, JPEG, PNG, TIFF Interfaces and software Interface Compact flash card reader included Software SmartView; full analysis and reporting software included Laser Classification Class II Laser targeting Laser dot visible on screen when blending thermal and visible image Controls and adjustments Set-up controls Date/time, temperature units C/F, language, calibration range, LCD intensity (high/normal/low) Image controls Level, span, auto adjust, emissivity and background (continuous/manual) On-screen indicators Battery status, target emissivity, background temperature and realtime clock Power Battery type Li-Ion smart battery, rechargeable, field-replaceable Battery operating time Two hours continuous operation Battery charging 2 bay intelligent charger powered via AC outlet AC operation AC adapter 110/220 VAC, 50/60 Hz (TiR2FT/TiR4FT only) Power saving Automatic shutdown and sleep modes (user specified) DC operation Vehicle 12 volt adaptor optional Environmental and Operating temperature -10 C to +50 C mechanical design Storage temperature -40 C to +70 C Relative humidity Operating and storage 10 % to 95 %, non-condensing Water and dust resistant IP54 Weight (including batteries) 1.95 kg Camera size (HxWxD) 162 mm x 262 mm x 101 mm Other Warranty Two-years *standard 20 mm Germanium lens 7

8 Fluke SmartView TM Software Fluke SmartView TM software is included with each Fluke thermal imager. Powerful, modular suite of software tools for viewing, annotating, editing and analyzing infrared images. Generate fully customizable and professionallooking reports in a few easy steps. Full support of IR-Fusion Technology lets you edit images in five viewing modes. Easy to use, yet delivers high-end analysis performance SmartView software system requirements Windows /2000 SP4 with update roll up 1/XP SP2/Vista A web browser for product registration. Internet Explorer 5.0 or newer or Netscape 5.0 or newer 500 MB available disk space, not counting space requirements for web browser 16-bit color, 800 x 600 resolution video or better Color printer for printing the images CD-ROM drive (for installing SmartView software) Ordering Information Fluke TiR1 Thermal Imager with IR-Fusion Fluke TiR Thermal Imager with IR-Fusion Fluke keeps your world up and running Fluke TiR2/FT-20 IR FlexCam Thermal Imager with IR-Fusion Fluke TiR3/FT-20 IR FlexCam Thermal Imager with IR-Fusion Fluke TiR4/FT-20 IR FlexCam Thermal Imager with IR-Fusion Fluke. Keeping your world up and running. Fluke 975 AirMeter Fluke also offers a wide range of indoor air quality tools for the industry. With our long experience in delivering top quality, easy-touse and safe tools, we understand your job and the challenges you face day in-day out. Fluke tools are designed to improve your ability to do a better job by offering rugged, reliable and innovative instruments. Fluke Corporation P.O. Box 9090 Everett, WA USA Web: Fluke Europe B.V. P.O. Box BD Eindhoven The Netherlands Web: For more information call: In the U.S.A. (800) or Fax (425) In Europe/M-East/Africa +31 (0) or Fax +31 (0) In Canada (905) or Fax (905) From other countries +1 (425) or Fax +1 (425) Fluke 983 Particle Counter Fluke 971 Temperature Humidity Meter Fluke (UK) Ltd. 52 Hurricane Way Norwich Norfolk NR6 6JB United Kingdom Tel.: (020) Fax: (020) industrial@uk.fluke.nl Web: Fluke 922 Airflow Meter Fluke CO-220 Carbon Monoxide Meter Copyright 2007 Fluke Corporation. All rights reserved. Printed in the Netherlands 10/2007. Data subject to alteration without notice eng