MOISTURE ANALYZERS FAST COMPETENT RELIABLE DIVERSE. GB KERN Professional measuring.

Transcription

1 Models A Z Independent and family-run, is already in its 6th generation and is synonymous DBS...45 DLB...46 MLS-A...47 MLB-N...48 MLS-N...49 MRS...50 Printed in Germany cb-gb-nn-2020 TRADITION AND INNOVATION 68 YEARS OF with quality and reliability in customer service. FAST 24 hours delivery service order today, on its way tomorrow MOISTURE ANALYZERS Sales & service hotline from 8:00 am to 6:00 pm COMPETENT DKD accreditation (DIN EN ISO/IEC 7025) QM system (DIN EN ISO 900:2000) Initial verification by the manufacturer (2009/23/ECC) Medical (DIN EN ISO 3485 & 93/42/EWG) RELIABLE 2+ years warranty Precision in weighing technology for the last 68 years DIVERSE One-stop shopping: from pocket balances through to floor scales everything from one supplier Quick as a flash, find the product you want with the Balance Quick-Finder GB Professional measuring. Page 202

2 4 Moisture analysers Model Page DBS Modern moisture analyser with 0 memories and graphic display 45 DLB Robust moisture analyser for samples up to 60 g 46 mls-a Moisture analyser with 49 memories for individual drying processes 47 mlb-n High standard in moisture analysis with graphic-assisted display 48 mls-n Moisture analyser with 99 memory possibilities and graphic display 49 MRS Perfect drying with sample weight up to 24 g and many practical functions 50 Moisture analysing is an integral part of many raw and finished products and has a crucial influence on the quality of the product. Moisture analysers are used particularly in the food industry, water resource management (sewage plants, etc.), plastics industry, agriculture and the energy industry (bio-energy plants, etc.). Determining moisture requires a great deal of experience. Depending on the type of sample and the task involved, various drying processes are used. has concentrated on the most widely-used drying method: halogen drying, which brings many advantages: Even warming of the sample from above, without any risk of burning the surface of the sample Quick-Finder Moisture analyzers Read-out Weighing Model range d 0,00 g 0,00 g 0,00 g 0,00 g 0,00 g 0,0 g 0,00 g 44 Max 50 g 50 g 60 g 65 g 24 g 50 g 60 g MLB 50-3N MLS 50-3HA60N DBS 60-3 MLS 65-3A MRS 20-3 MLS 50-2A DLB 60-3A Moisture analysers Price Page excl. VAT ex works 220,490,990,280,3420,200,020, ready for shipping Affordable purchase costs ensure rapid amortisation of the device Established temperature ranges from C High measuring precision, up to 0.0 % Sufficient spare capacity, weighing range up to over 60 g Various drying programs (gradual drying, standard drying, stage drying, preheating stage (Boost)) The numerous memories of the moisture analyser are particularly useful, as they hold information on the complete drying processes with drying parameters such as, for example, drying period, drying temperature, display settings, switch off criteria, etc... This saves an enormous amount of time and helps to achieve repeatable results. = Standard = Option For an explanation of the symbols, see the flap of the envelope

3 Moisture analyser DBS Modern moisture analyser with 0 memories and graphic display DBS ,00 g / 0,0 % 60 g 0,5 % of sample 2 g 0,02 % of sample 0 g 0-00 % ATRO [%] [(SG-RG) : RG] 00% ATRO [%] (SG : RG) 00% Weight loss [g] (WL) Recall of 00-0 % 0 50 C C in steps up to C Drying in levels When the set time has expired min - 4 h When the weight loss per unit of time falls below the target value (30 sec) Interval can be set from sec - 0 min (Only when used with printer YKB-0 or PC) 202x336x57 mm approx. 4,2 kg 990,- For more information, please visit Order hotline +49-(0) Order Hotline: Go to back page of catalogue Halogen quartz glass heater 400 W Backlit LCD display, digit height 4 mm 2 Previous drying time 3 Current temperature 4 Unit for displaying the results 5 Current moisture content in % 6 Drying mode/status display drying Observation window over the sample, useful during initial adjustment Internal memory for automatic sequence of 0 drying programs and 00 drying processes carried out The last value measured remains on Sample description for up to 99 samples, 2 digits, freely programmable, and is printed in the measuring protocol Date and time display as standard 0 sample plates included Table of applications: There are many practical examples in the operating instructions Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples 80 pieces, RH-A02, 65, 7 Temperature calibration set consists DBS-A0, 290, Interface cable USB, DBS-A02, 290, Matrix needle printer, 9-03, 330, Thermal printer, YKB-0N, 240,Moisture analysers 45

4 Moisture analyser DLB Robust moisture analyser for samples up to 60 g DLB 60-3A 0,00 g / 0,0 % 60 g 0,05 % of sample 0 g 0-00 % ATRO [%] (SG : RG) 00% Weight loss [g] (WL) Recall of 46 Moisture analysers 00-0 % 0 35 C - 60 C in steps up to C When the set time has expired min - 99 min When the weight loss per unit of time falls below the target value (60 sec) Continuous output (residual weight) At the end of the drying process, manual or automatic (only in connection with YKB-0N printer or PC) 20x340x225 mm approx. 4,2 kg 020,- Backlit LCD display, digit height 7 mm Current moisture content in % 2 Unit for displaying the results, e.g. % moisture 3 Drying process active 4 Halogen quartz glass heater 400 W Internal memory for automatic sequence of 5 complete drying processes The last value measured remains on 0 sample plates included Table of applications: There are many practical examples in the operating instructions Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples that splash or become encrusted. Unit of 80 pieces, RH-A02, 65, 5 Temperature calibration set consists DLB-A0, 300, Protective working cover standard, can be reordered, PLJ-A0, 25, Thermal printer, YKB-0N, 240,- For more information, please visit OrderGo hotline +49-(0) Order Hotline: to back page of catalogue

5 Moisture analyser MLS-A Moisture analyser with 49 memories for individual drying programs 7 MLS 65-3A 0,00 g / 0,0 % 65 g 0,5 % of sample 2 g 0,05 % of sample 0 g 0-00 % ATRO [%] [(SG-RG) : RG] 00% Residual weight [g] Recall of MLS 50-2A 0,0 g / 0,05 % 50 g 0,2 % 00-0 % C in steps up to C Drying in levels When the set time has expired 3 min - 99 min When the weight loss per unit of time falls below the target value (both values freely adjustable mg/sec) Interval adjustable from sec 99 sec (Also in combination with YKB-0N printer or PC) 250x360x75 mm approx. 6 kg 280,200,- For more information, please visit Order hotline +49-(0) Order Hotline: Go to back page of catalogue LCD display, digit height 25 mm Previous drying time 2 Current temperature 3 Moisture display in % 4 Current moisture content in % 5 Halogen quartz glass heater 400 W The last value measured remains on 6 0 sample plates included Table of applications: There are many practical examples in the operating instructions Internal memory for automatic sequence of 49 drying programs (0 free digits for each memory) Easy to use Display in German and English 6 Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples 80 pieces, RH-A02, 65, Temperature calibration set consists MLS-A, 250, Matrix needle printer, 9-03, 330, 7 Thermal printer, YKB-0N, 240,Moisture analysers 47

6 Moisture analyser MLB-N High standard in moisture analysis with graphics display MLB 50-3N 0,00 g / 0,0 % 50 g 0,5 % of sample 2 g 0,02 % of sample 0 g 0-00 % ATRO [%] [(SG-RG) : RG] 00% Recall of 48 Moisture analysers 00-0 % C in steps up to C When the set time has expired (0 min - 9 h 50 min) When a constant weight per adjustable time unit has been reached ( - 59 sec) Interval can be set from - 80 sec (Only when used with printer YKB-0 or PC) 20x335x56 mm approx. 6 kg 220,- Halogen quartz glass heater 400 W Backlit LCD display, digit height 4 mm Moisture display in % 2 Current moisture content in % 3 Printout in moisture % 4 Type of drying Standard 5 Switch off mode 6 Previous drying time 7 Current temperature 8 Drying process active The last value measured remains on 9 0 sample plates included Table of applications: There are many practical examples in the operating instructions 9 Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples 80 pieces, RH-A02, 65, Temperature calibration set consists MLB-A, 320, Protective working cover standard, can be reordered, ALS-A02, 25, Matrix needle printer, 9-03, 330, Thermal printer, YKB-0N, 240,- For more information, please visit OrderGo hotline +49-(0) Order Hotline: to back page of catalogue

7 Moisture analyser MLS-N 3 4 Moisture analyser with 0 memory possibilities and graphic display MLS 50-3HA60N 0,00 g / 0,0 % 50 g 0,5 % of sample 2 g 0,02 % of sample 0 g 0-00 % ATRO [%] [(SG-RG) : RG] 00% Residual weight [g] Recall of 00-0 % C in steps up to C Drying in levels When the set time has expired ( - 9 h 59 min) When loss in weight per unit of time falls below the target value, both values can be adjusted ([mg/sec]) Interval can be set from sec - 5 min (Only when used with printer YKB-0 or PC) 20x335x56 mm approx. 6,3 kg 490,- Price reduction For more information, please visit Order hotline +49-(0) Order Hotline: Go to back page of catalogue Backlit Graphic display, digit height 4 mm Moisture display in % 2 Current moisture content in % 3 Printer interval 30 sec 4 Printout in moisture % 5 Switch off mode 6 Type of drying Standard 7 Previous drying time 8 Status bar 9 Current temperature 0 Type of drying Standard Target temperature 2 Drying process active 3 Halogen quartz glass heater 400 W Internal memory for automatic sequence of 0 drying programs (2 free digits for each memory) and 00 drying processes carried out, which can be recalled individually Net weighing assistance to a defined target value [g] with adjustable tolerance range % - 25% of the target value Simple step-by-step user guidance in the display in the following languages German, English, French, Italian, Spanish, Polish Can be connected to PC keyboard The last value measured remains on 4 0 sample plates included Table of applications: There are many practical examples in the operating instructions 4 Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples 80 pieces, RH-A02, 65, Temperature calibration set consists MLB-A, 320, Protective working cover standard, can be reordered, ALS-A02, 25, Matrix needle printer, 9-03, 330, Thermal printer, YKB-0N, 240,Moisture analysers 49

8 Moisture analyser MRS Perfect drying with sample weight up to 24 g and many practical functions MRS ,00 g / 0,0 % 24 g Reproducibility, 0,2 % weight of sample 2 g 0,02 % of sample 0 g 0-00 % ATRO [%] (SG : RG) 00% ATRO [%] [(SG-RG) : RG] 00% Weight loss [g] (WL) Residual weight [g] Recall of 50 Moisture analysers 00-0 % C in steps up to C When the set time has expired (0, min) When constant weight has been achieved When loss in weight per unit of time falls below the target value, both values can be adjusted ([g/min] or [%/min]) Measurement recall. Interval adjustment of 0, - 0 min with automatic number sampling. Only in combination with YKB-0 or PC 20x340x70 mm approx. 6.3 kg 3420,- Halogen quartz glass heater 400 W Observation window over the sample, useful during initial adjustment The last value measured remains on 4 displays for results in % or g, heating mode, temperature and time 2 30 sample plates included Memory for automatic sequence of 20 complete drying programs Net weighing assistance to a defined target value [g] with adjustable tolerance range Date and time display as standard Simple step-by-step user guidance in the display in the following languages: German, English, French Temperature calibration set consists MRS-A0N, 820, 2 Sample plates aluminium, Ø 92 mm. Unit of 80 pieces, MLB-A0, 45, Round fiberglass filter e.g. for samples 80 pieces, RH-A02, 65, Protective working cover standard, can be reordered, PR-A25, 25, Matrix needle printer, 9-03, 330, 3 Thermal printer, YKB-0N, 240,- For more information, please visit OrderGo hotline +49-(0) Order Hotline: to back page of catalogue