diode led DAZZLE ACCENT LIGHTING SYSTEM POWERED BY INCEPTION LIGHTING TECHNOLOGY IP65 24VDC SPECIFICATIONS CHANNEL COVER AVAILABLE IN:

Transcription

1 DAZZLE ACCENT LIGHTING SYSTEM SPECIFICATION SHEET ITEM # 24VDC RGB CHANNEL COVER AVAILABLE IN: STRIP COLOR LENGTH LUMENS¹ DI-IL-TAPE-BLK-0.5 Black 20 inches 84 DI-IL-TAPE-BLK-1.5 Black 59 inches 252 DI-IL-TAPE-BLK-5.0 Black 16 feet 5 inches 840 DI-IL-TAPE-WHT-0.5 White 20 inches 84 DI-IL-TAPE-WHT-1.5 White 59 inches 252 DI-IL-TAPE-WHT-5.0 White 16 feet 5 inches 840 COLOR-CHANGING IP65 SPECIFICATIONS Voltage Wattage Diffused Max. Run 2 Maximum Extension³ 24VDC 20 in:.48w 59 in: 1.45W 16.4 ft: 4.76W No 130 ft. per controller output 400 ft. combined wire and strip per controller output Dimensions 1.88 x.88 x 48 in. (W x H x L) Field Cuttable Tape Light Field Cuttable Channel No Yes LED Chip Beam Angle 120 Dimmable Environment Warranty Via DMX IP65 / Outdoor Location 5 years Visit the product page at for installation guides,.ies files, voltage drop charts, and LM-79 reports. White Tan Brown Item # Project 2017 Elemental LED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: Fax: info@diodeled.com SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

2 DAZZLE ACCENT LIGHTING SYSTEM SPECIFICATIONS CONTINUED LED Chip: 5050 Connections 4 : 3 in. Female Connector. 3 in. Male Connector. Leads: 22/4 AWG Ambient Temp 5 : F ( C) Operating Temp 6 : F (0-40 C) MECHANICAL DIAGRAM 3 in..4 in. 10 in. 3 in..5 in. 1. LED chips have a luminous flux range with a tolerance of +/- 5%. 2. Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length. 3. Extension cable, when paired with Dazzle Accent Tape Light has a combined maximum length of 400 ft. (example: 100 ft. of Dazzle Accent LED Tape Light could have up to 300 ft. of extension cable connecting it to the color controller) 4. Wire leads and accessories are not rated for in-wall installation unless otherwise noted. Attached wire leads and connections are not fieldcuttable. 5. Do not install product in an environment that exceeds the maximum ambient temperature. Exceeding the maximum ambient temperature may damage LED chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency. 6. Operating temperature is measured according to the minimum and maximum ambient temperature environment. SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

3 DAZZLE ACCENT CHANNELS AND COVERS DAZZLE ACCENT LIGHTING SYSTEM SKU DI-IL-BASEWHT DI-IL-COVERWHT DI-IL-COVERTAN DI-IL-COVERBRN DI-IL-CLEARENDCAP DESCRIPTION 48 INCH CHANNEL Channel for use with DAZZLE ACCENT Tape Light. Dimensions: 48 x 1.69 x.69 in. (L x W x H) 48 INCH COVER (White) Cover for use with DAZZLE ACCENT Tape Light and Channel Dimensions: 48 x 1.88 x.88 in. (L x W x H) 48 INCH COVER (Tan) Cover for use with DAZZLE ACCENT Tape Light and Channel Dimensions: 48 x 1.88 x.88 in. (L x W x H) 48 INCH COVER (Brown) Cover for use with DAZZLE ACCENT Tape Light and Channel Dimensions: 48 x 1.88 x.88 in. (L x W x H) CHANNEL ENDCAP End piece for capping off the end of DAZZLE ACCENT Channel.81 in. 48 in..88 in..88 in in..88 in in. 48 in..19 in..43 in..50 in..69 in..38 in..56 in in..69 in in. SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

4 DAZZLE ACCENT COLOR CONTROLLER DAZZLE ACCENT LIGHTING SYSTEM SKU DI-IL-CONTROL1 DESCRIPTION DAZZLE ACCENT COLOR CONTROLLER Pre-Programmed color controller with 33 separate color and pattern modes to fit your needs. Includes hand held remote. Dimensions: 7.38 x 4.44 x 1.44 in. (L x W x H) SPECIFICATIONS LED Controller RGB DMX controls Single color modes: 11 Holiday Scenes: 12 Celebration Scenes: 10 Input from Driver: 12-24VDC Constant Voltage Output to Load: 12-24VDC Constant Voltage Power Failure Memory: Yes Remote RF Distance: 95 ft. Connections: (4) 7 in. Male Output DMX Connectors, & (1) 8.5 in. Power Input Cable Leads: 22/4 AWG Ambient Temp: F ( C) Operating Temp: F (0-40 C) MEETS DMX512(1990) MODE SET UP DOWN power signal PRE-PROGRAMMED SCENES STATIC HOLIDAY SCENES CELEBRATION SCENES 1. Warm White 12. Red, Green Gradual 24. Purple, White Gradual 2. Soft White 13. Red, Green Jump 25. Red Flick 3. Pure White 14. Green, Warm White, Red, Warm White Gradual 26. Gold, Blue Jump 4. Gold 15. Pink, Red Smooth 27. Purple, Yellow Jump 5. Red 16. Pink, Warm White, Red, Warm White Gradual 28. Maroon Gradual 6. Orange 17. Green, White Gradual 29. Green, Gold Jump 7. Yellow 18. Purple, Indigo, Gold Gradual 30. Burnt Orange Gradual 8. Green 19. Red, Pure White, Blue Smooth 31. Red, Pure White Jump 9. Blue 20. Red, Pure White, Blue Jump 32. Yellow, Pure White Jump 10. Indigo 21. Red, Pure White, Blue Gradual 33. Blue, Pure White Jump 11. Purple 22. Orange, Pure White Jump 23. Orange Gradual SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

5 DAZZLE ACCENT LIGHTING SYSTEM DAZZLE ACCENT ACCESSORIES SKU DI-IL-EXT3 DI-IL-EXT10 DESCRIPTION 3 FOOT EXTENSION CABLE Creates an extension between DAZZLE ACCENT accessories. Wire: 22/4 AWG Dimensions: 3 ft. x.5 in. (L x Dia) 10 FOOT EXTENSION CABLE Creates an extension between DAZZLE ACCENT accessories. Wire: 22/4 AWG Dimensions: 10 ft. x.5 in. (L x Dia) DI-IL-EXT25 25 FOOT EXTENSION CABLE Creates an extension between DAZZLE ACCENT accessories. Wire: 22/4 AWG Dimensions: 25 ft. x.5 in. (L x Dia) DI-IL-EXT FOOT EXTENSION CABLE Creates an extension between DAZZLE ACCENT accessories. Wire: 22/4 AWG Dimensions: 100 ft. x.5 in. (L x Dia) DI-IL-YCONNECT 2-WAY SPLITTER CABLE Creates a 2-way extension between DAZZLE ACCENT accessories. Wire: 22/4 AWG Dimensions: 11 in. x.5 in. (L x Dia) SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

6 DAZZLE ACCENT LIGHTING SYSTEM DAZZLE ACCENT DRIVER SKU DI-IL-TRANS200 DESCRIPTION 24V 200W Driver 8.33 AMP Driver for use with the DAZZLE ACCENT Lighting System. Allows the use of up to 520' of DAZZLE ACCENT Tape Light. Dimensions: 9.25 x 4.88 x 2.38 in. (L x W x H) Cable Length: 6.5 in. *Class 2 options available. Contact the Diode LED Specifications and Project Support Department at Quotes@diodeled.com for further details in in in. SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

7 DAZZLE ACCENT LIGHTING SYSTEM BASIC INSTALLATION - SYSTEM DIAGRAM 120V AC WALL OUTLET DAZZLE ACCENT 200 WATT DRIVER DI-IL-TRANS200 DAZZLE ACCENT COLOR CONTROLLER DI-IL-CONTROL1 12V DC OUTPUT DAZZLE ACCENT EXTENSION CABLES DI-IL-EXT3 DI-IL-EXT10 DI-IL-EXT25 DI-IL-EXT100 DAZZLE ACCENT TAPE LIGHT, CHANNEL, AND COVER SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8

8 DAZZLE ACCENT LIGHTING SYSTEM ADDITIONAL INFORMATION DAZZLE ACCENT Lighting System Installation Guide SAFETY / WARNINGS / DISCLOSURES 1. Install in accordance with national and local electrical code regulations. 2. This product is intended to be installed and serviced by a qualified, licensed electrician. 3. Each maximum run requires a dedicated power feed from the color controller. Do not extend beyond the recommended maximum run length. 4. DAZZLE ACCENT Tape Light, attached wire leads, and additional extension cables, connectors, etc., are not rated for in-wall installation unless otherwise noted. 5. Ensure applicable wire is installed between driver, fixture, and any controls in-between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires, and cause fire. 6. Do not install in environment where excessive heat may exist (ex. close proximity to fireplace, etc.) See Ambient Temperature ratings 7. Do not modify product beyond instructions or warranty will be void. 8. DAZZLE ACCENT Tape Light must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty. 9. Actual color may vary from what is pictured on this sheet and other print materials due to the limitations of photographic processes. 10. We reserve the right to modify and improve the design of our fixtures without prior notice. We cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output. WARRANTY Limited Warranty This product has a five (5) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at limited-warranty/ within the Policies section. For warranty related questions please contact product support. Consumer s Acknowledgment Elemental LED, Inc. stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the correct components is essential. Elemental LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Elemental LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from an Elemental LED employee or agent regarding a customer s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer s responsibility to adhere strictly to all information contained in the Product Specification Sheets. There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Elemental LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Elemental LED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Elemental LED product specifications can make the requisite decisions appropriate for a successful finished lighting application Elemental LED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: Fax: info@diodeled.com SPEC SHEET DAZZLE ACCENT LIGHTING SYSTEM SS OF 8