Indoor Rigid Light LSXK Luci silux K Indoor. "Luci silux series" is renewed to pursue simplicity and realize enormous potential.

Size: px

Start display at page:

Download "Indoor Rigid Light LSXK Luci silux K Indoor. "Luci silux series" is renewed to pursue simplicity and realize enormous potential."

Claude Gregory
5 years ago
Views:

1 Indoor Rigid Light LSXK Luci silux K Indoor Color management MacAdam 3 step "Luci silux series" is renewed to pursue simplicity and realize enormous potential. - 6 color variations - 10 length variations

Indoor Rigid Light LSXK / LSXWK Luci silux series K RENEWAL "Luci silux series" is renewed

HIRAKATA T-SITE Location: JAPAN Client: SO-TWO.

2 Indoor Rigid Light LSXK / LSXWK Luci silux series K RENEWAL "Luci silux series" is renewed to pursue simplicity and realize enormous potential. HIRAKATA T-SITE Location: JAPAN Client: SO-TWO.INC Architect office: Takenaka Corporation TSUTAYA Interior decoration design: Culture Convenience Club Co., Ltd. / Takenaka Corporation Lighting design: Uchihara Creative Lighting Design Inc. Construction: Takenaka Maedagumi Joint Venture Graphic design: HIROMURA DESIGN OFFICE Fabric design : Studio Akane Monyama Photo: Nacasa & Partners Inc. 76 LSXK Luci silux K

Indoor Luci silux wide K Rigid Light Luci silux K LSXK How to use Luci silux

Surprised by reflections of indirect lighting at the foot of fixture on a glossy

Frame of tower-shaped fixture Since dots are not reflected on metal frames or

Lighting around a mirror or for a bathroom vanity Perfect for a bathroom vanity

Perfect for inside of mirrors at beauty salons, indirect lighting, and fitting

Under-shelf lighting located higher than eye level Indirect lighting which is a

selection, testing, or designing of diffusing covers to remove dots is unnecessary.

therefore, the total cost of furniture and fixtures is reduced.

even when it is close to a wall (lighted surface).

By embedding the slim-shaped silux into a hanger rack, it provides sufficient

Desk light for glossy desks Silux is recommended for use as a desk lamp at a

Handrail light Small enough to be embedded in handrails.

without dots or glare for going upstairs.

3 Indoor Luci silux wide K Rigid Light Luci silux K LSXK How to use Luci silux series Because it has no dots, even its reflection is beautiful. Surprised by reflections of indirect lighting at the foot of fixture on a glossy floor at the delivery site... Such problems can be solved instantly. Frame of tower-shaped fixture Since dots are not reflected on metal frames or sheet glass, beautiful merchandise exhibit without graceless glare can be realized. Lighting around a mirror or for a bathroom vanity Perfect for a bathroom vanity with glossy tiles. Perfect for inside of mirrors at beauty salons, indirect lighting, and fitting rooms. Under-shelf lighting located higher than eye level Indirect lighting which is a short distance away from the lighted surface Hangers and wardrobe interiors The selection, testing, or designing of diffusing covers to remove dots is unnecessary.installation is completed by just clipping it into place.therefore, the total cost of furniture and fixtures is reduced. Unevenness (dark spots due to scalloping) of lighting is completely eliminated even when it is close to a wall (lighted surface). Complete indirect lighting without space considerations. By embedding the slim-shaped silux into a hanger rack, it provides sufficient light for commercial goods without basic lighting. Desk light for glossy desks Silux is recommended for use as a desk lamp at a reception counter, or in a library, museum, or cafe. Handrail light Small enough to be embedded in handrails. By using it as a handrail light for stairs, functional lighting is realized without dots or glare for going upstairs. Pendant light or ceiling light When used as a floating pendant light, its slim, long, and beautiful appearance provides a strange feeling as if there is no light source although light exists. Design line lighting for buildings and shops Directly showing the beautiful lines. Creates a bright and active space by using it for interior design walls in buildings and for pillars and walls in shops. Luci silux K LSXK 77 Vivoxy Graze Recta THOF Creide lens Creide F silux K silux wide K Slim Light nano line Glossy flooring such as marble

4 Indoor Rigid Light LSXK Luci silux K Indoor Color management Safety MacAdam 3 step RENEWAL Model No. LSXK DF - I Product Name LSXK Length Light source color N : Natural white W : White WW : Warm white 3500K L30 : Warm white 3000K L27 : Warm white 2700K L24 : Warm white 2400K Cover Type DF : Diffuser Environment I : Indoors Light Intensity LSXK-1008-L27-DF-I 1/2 illuminance angle (lx) 4 m Specification Length Model No. LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I LSXK DF-I Power consumption 0.7W 3.3W 5.2W 6.6W 7.6W 9.5W 10.9W 13.3W 15.2W 19.5W Fitting length(l) 74mm 259mm 388mm 509mm 573mm 702mm 823mm 1008mm 1137mm 1451mm Weight 15g 40g 59g 76g 84g 110g 0g 145g 160g 206g Luminaire efficacy(2700k) 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w 51.8 lm/w Light source color = Device inventory = Please contact us since it is made-to-order products and has MOQ. * = Equivalent D 7100K N 5000K Ra lm* 155lm* 232 lm* 310 lm* 349 lm* 426 lm* 504 lm* 620 lm 698 lm* 892 lm* W 4000K Ra lm* 155 lm* 232 lm* 310 lm* 349 lm* 426 lm* 504 lm* 620 lm 698 lm* 892 lm* WW 3500K Ra lm* 148 lm* 222 lm* 297 lm* 334 lm* 408 lm* 482 lm* 594 lm 668 lm* 854 lm* L K Ra lm* 145 lm* 217 lm* 290 lm* 326 lm* 399 lm* 472 lm* 581 lm 653lm* 835 lm* L K Ra lm* 138 lm* 208 lm* 277 lm* 3 lm* 381 lm* 450 lm* 554 lm 624 lm* 797 lm* L K Ra lm* 8 lm* 193 lm* 257 lm* 289 lm* 354 lm* 418 lm* 515 lm 579 lm* 740 lm* L K Specification may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning. General Specification Input voltage Environment Max. length per circuit Material (body) Attachments Option parts Certification Dimmable Power Supplies DC24V Indoors (no condensation) 6m Polycarbonate, Aluminum CE Multiclip 3 pcs for 702mm or shorter 5 pcs for 823mm or longer Multiclip Liftclip Outerclip Magnet set Power supply cable Joint cable Required External dimensions rear view top view (80) L±2 (80) Max. connectable length per power supply Length of LED fixture (70% loading factor) *: split into multiple circuits Power supply 2.6m 5.2m 7.8m* 50W power supply 100W power supply 150W power supply 78 LSXK Luci silux K

Optional parts Multiclip K for silux Attachment Model No : LSX-PTM-C Attachment 3 pcs for 702mm or shorter 5 pcs for 823mm or longer 3 pcs/1 bag top view 4.

LED fixture. There are two directions of fixing the liftclip. 15.8 13 62.

Power supply cable 3M Model No : CAD-3000-MCRN-I 1 pcs per circuit for connecting the LED fixture to power supply or dimmer driver. 8.4 24.2 3000 top view top view 15.4 10 17.

3 Vivoxy Graze RECTA THOF Creide lens Creide F silux K silux wide K Slim Light nano line 9.

5 Optional parts Multiclip K for silux Attachment Model No : LSX-PTM-C Attachment 3 pcs for 702mm or shorter 5 pcs for 823mm or longer 3 pcs/1 bag top view 4.8 rear view flat head tapping screw M Indoor Rigid Light LSXK 16 flat head tapping screw M3 Liftclip for silux Model No : LSX-PTL 2 pcs/1 bag Liftclip is for hiding the connector behind the LED fixture. There are two directions of fixing the liftclip pan head screw M3 flat head tapping screw M Outerclip for silux Model No : LSX-PT-A 5 pcs/1 bag Outerclip is for the downwards emitting installation. Power supply cable 3M Model No : CAD-3000-MCRN-I 1 pcs per circuit for connecting the LED fixture to power supply or dimmer driver top view top view flat head tapping screw M Joint cable 1M Model No : CAD-1000-MCFC-I 15.4 Joint cable between two LED fixtures ± Vivoxy Graze RECTA THOF Creide lens Creide F silux K silux wide K Slim Light nano line Magnet Set A Model No : MG-A 5 pcs/1 bag for multiclip installation Used for installing LED fixture on metal plate. Metal plate is required by installer. Not available for Air Freight shipping. Magnet Magnet Set L Model No : MG-L 10 pcs/1 bag for liftclip installation Used for installing LED fixture on metal plate. Metal plate is required by installer. Not available for Air Freight shipping. Magnet Countersink for M3 Countersink for M3 Plate 8 8 Plate M3 tap 1 M3 tap Wassher 0.5 Screw M Screw M pan head screw M3 9.2 Luci silux K LSXK 79

6 Installing the product For horizontal installation Multiclip K installation: behind fixing The mounting clip should be preset on the installation spot with screws supplied by installer. (Flat head screws M3 recommended.) When removing the LED fixture, please be careful and not to damage the mounting clip. Attachments Multiclip K for silux (LSX-PTM-C) Recommended screw: flat head screw M3 Multiclip K installation: side fixing For installation with protruding edge, multi-clip installation should follow the diagram below. Insert the Multiclip at the spot shown in the above diagram. Ensure click sound when inserting. Rotate the Multiclip in 90 degrees in the direction as the arrow mark shown on the back of the Multiclip. Slide the Multiclip to the desired fixing position. Use the recommended screws supplied by installer to fix the Multiclip with the LED fixture. (Flat head screws M3 recommended.) Liftclip installation Required screws are different depending on the installation direction.use the recommended screws and install them by following the diagram. Standard installation direction Recommended screw: flat head screw M3 Horizontal installation direction Recommended screw: pan head screw M3 Liftclip for silux (LSX-PTL) Outerclip installation The Outerclip should be preset on the installation spot with screws supplied by installer. (Flat head screws M3 recommended.) Tilt and insert the LED fixture into the Outerclip. Make sure the LED fixture fit in the Outerclip. Outerclip for silux (LSX-PT-A) Magnet installation for Multiclip Magnet set A (MG-A) Plate no need to use attached washer for Liftclip Magnet set L (MG-L) Screw If the flat head screw is short and the plate does not tighten, please remove the washer. Plate Magnet Magnet Magnet Plate Screw Screw Attachments Multiclip K for silux (LSX-PTM-C) Liftclip for silux (LSX-PTL) 80 LSXK Luci silux K

7 For vertical installation Multiclip K installation: behind fixing For vertical installation, make sure the top and bottom of LED fixture hook on the edge of the Multiclip K in accordance with the diagram. Caution: If the weight of the LED fixture is not supported by the edge of the Multiclip, it may slide down and fall. Bottom * Ensure not to interfere with the lead wire. Top Indoor Rigid Light LSXK Attachments Multiclip K for silux (LSX-PTM-C) Recommended screw: flat head screw M3 Recommended number of clips for the installation Multiclip K for silux (LSX-PTM-C) Outerclip for silux (LSX-PT-A) Multiclip K for silux (LSX-PTM-C)+ Magnet set A (MG-A) Liftclip for silux (LSX-PTL) Liftclip for silux (LSX-PTL)+ Magnet set L (MG-L) Vivoxy Graze RECTA THOF Creide lens Creide F silux K silux wide K Slim Light nano line Luci silux K LSXK 81

8 Connecting to the power supply Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem. When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple. System configuration diagram Max. connectable length depends on the wattage of the power supply. Max. length per circuit of Luci silux K is 6m. If it exceeds 6m, please split into multiple circuits. Max. distance from the power supply to the end of LED fixture is 11m. Power supply DC24V Max. distance 11m LED fixture max. 6m Circuit 1 Circuit 2 Circuit 3 Power supply cable 3000mm (CAD-3000-MCRN-I) 82 LSXK Luci silux K

9 Direct horizontal surface light intensity distribution chart LSXK-1008-N-DF-I Light source color 5000K 209 cd Luminous flux 620 lm Color rendering index Ra 93 Distance from wall 0mm Indoor Rigid Light LSXK LSXK-1008-W-DF-I Light source color 4000K 209 cd Luminous flux 620 lm Color rendering index Ra 94 50mm LSXK-1008-WW-DF-I Light source color 3500K 200 cd Luminous flux 594 lm Color rendering index Ra mm LSXK-1008-L30-DF-I Light source color 3000K 195 cd Luminous flux 581 lm Color rendering index Ra 93 LSXK-1008-L27-DF-I Light source color 2700K 173 cd Luminous flux 554 lm Color rendering index Ra 93 LSXK-1008-L24-DF-I Light source color 2400K 173 cd Luminous flux 515 lm Color rendering index Ra mm 200mm 300mm Vivoxy Graze RECTA THOF Creide lens Creide F silux K silux wide K Slim Light nano line Luci silux K LSXK 83

10 Singapore World HQ 52A Tanjong Pagar Road, Singapore Tel : info@luci.co.jp Hong Kong Marketing Office Room 1801, 18/F, Kwai Hung Holdings Centre, 89 King's Road, North Point,Hong Kong Tel : info@luci.co.jp Dubai Marketing Office 5WA 331, DAFZA, Dubai, United Arab Emirates Tel: info@luci.co.jp Group company Tokyo Japan Regional HQ Akasaka Bldg. 4F, , Akasaka, Minato-ku, Tokyo , Japan Tel : info@luci.co.jp Osaka Office Yotsubashinakano Bldg. 3F, , Minamihorie, Nishi-ku, Osaka-shi, Osaka , Japan Tel : info@luci.co.jp Group company Shanghai China mainland Regional HQ : Rm.1804, South Building, 300 Xuanhua Rd., Changning District, Shanghai(200050)PRC. Tel : info@luci.co.jp Beijing Office : Rm.1030 Building102, (Qingnian Rd) Qingniangongshe., Chaoyang North Rd, Chaoyang District, Beijing(100026)PRC. Tel : info@luci.co.jp Partner Company Korea SANSHO Korea CO.,LTD. KOREA SANSHO SHOJI CO.,LTD. #507, 36, Teheran-ro 87gil, Gangnam-gu, Seoul, 06164, Korea Tel:

Indoor Rigid Light LNL Luci nano line Indoor. 5.5mm. - 6 color variations - 10 length variations. Color management CIE

Indoor Rigid Light LNL Luci nano line Indoor. 5.5mm. - 6 color variations - 10 length variations. Color management CIE Indoor Rigid Light Luci nano line Indoor Color management CIE - 6 color variations - 0 length variations mm Indoor Rigid Light Luci nano line Indoor Compact design lighting with a mm light-emitting surface.