GUARDIAN TM ROOF WARNING LINE PERIMETER

Size: px

Start display at page:

Download "GUARDIAN TM ROOF WARNING LINE PERIMETER"

Derick Hood
5 years ago
Views:

1 WORKSITE PRODUCTS

GUARDIAN TM ROOF WARNING LINE PERIMETER ARE YOU OSHA COMPLIANT? In accordance with OSHA 1926.

2 GUARDIAN TM ROOF WARNING LINE PERIMETER ARE YOU OSHA COMPLIANT? In accordance with OSHA (f), and other applicable regulations to warn of leading edge hazards, this device shall be used only by a qualified competent person. The warning line shall be staged and supported in such a way that it is no less than 34 inches from the walking/working surface at its lowest point and no more than 39 inches at its highest point. 2

GUARDIAN TM ROOF WARNING LINE PERIMETER Use the Cortina Safety Products Roof Warning Line Perimeter on roof tops, construction sites, in parking lots, manufacturing plants, and office buildings.

Exclusive Extra Wide Grip 4 OSHA Compliant 39 Tie Off 47 39 39 Max Tie Off Height 34 Minimum 6-10 Feet GUARDIAN ROOF WARNING LINE PERIMETER OSHA 1926.

3 GUARDIAN TM ROOF WARNING LINE PERIMETER Use the Cortina Safety Products Roof Warning Line Perimeter on roof tops, construction sites, in parking lots, manufacturing plants, and office buildings. This simple to assemble Roof Warning Line Perimeter, with it's easy pennant flag tie off system, is easy to set up and remove quickly, and stores easily! Exclusive Extra Wide Grip 4 OSHA Compliant 39 Tie Off Max Tie Off Height 34 Minimum 6-10 Feet GUARDIAN ROOF WARNING LINE PERIMETER OSHA (f) Compliant Cortina EZ Grab Guardian high visibility orange Molded High Density Polyethylene with UV Color Stabilization OSHA Compliant Pennants lb tensile strength Guardian accepts warning light or sign Does not conduct Meets fall protection system requirements Easy BASE drop over assembly Stackable for storage 100% recycled rectangular 30 lb rubber base ITEM # RBC DESCRIPTION Kit - 50 EZ Grab Guardian Channelizers w 50 Bases and 3 Red/Yellow Pennant Strands EZ Grab Guardian Channelizer lb Rubber Base OSHA Compliant 105' Pennants Red Yellow Red/Yellow Alternating 3

4 4 WORKSITE PRODUCTS

WORKSITE PRODUCTS A-20 BARGARD TM COVERS A-5 BARGARD TM COVERS BARGARD TM PROTECTOR COVERS Fits rebar 1" to 2-1/4"

5" 97-1814 A-20 White 2.75" x 3.5" Fits rebar 3/8" to 3/4" diameter Fits inside 1" I.D.

5" Fits rebar #3-9, 3/8" to 7/8" diameter Metal reinforced Safety Orange for visibility 100 per pack 97-1810 4" x

Orange/White 03-405-60 60' Yellow 03-406 60' Red/Yellow alternating legends - Danger Keep Out/Safety First/Danger

100' Multi 03-404 100' Orange/White 03-405 100' Yellow 03-400-105 105' Red- OSHA 03-405-105 105' Yellow - OSHA

rebar or similar protruding objects) at grade or above grade when used in accordance with the Installation

Please contact the manufacturer or distributor if the Installation Instructions are missing or illegible.

5 WORKSITE PRODUCTS A-20 BARGARD TM COVERS A-5 BARGARD TM COVERS BARGARD TM PROTECTOR COVERS Fits rebar 1" to 2-1/4" diameter Fits inside 1-3/4" I.D. 100 per pack A-20 Lime 2.75" x 3.5" A-20 White 2.75" x 3.5" Fits rebar 3/8" to 3/4" diameter Fits inside 1" I.D. 100 per pack A-5 Lime 2.25" x 2.5" Fits rebar #3-9, 3/8" to 7/8" diameter Metal reinforced Safety Orange for visibility 100 per pack " x 4" Cal-OSHA Orange Rebar Cap A-10 BARGARD TM COVERS PENNANTS Fits rebar 3/8" to 1-1/4" diameter Fits inside 1-3/4" I.D. 100 per pack " x 2.55" ' Red DANGER ' Red ' Red/White ' Orange ' Orange/White ' Yellow ' Red/Yellow alternating legends - Danger Keep Out/Safety First/Danger Ahead/Be Careful/Safety Always ' Multi ' Red ' Red/White ' Orange ' Multi ' Orange/White ' Yellow ' Red- OSHA ' Yellow - OSHA ' Red/Yellow - OSHA BARGARD TM protective covers are approved for use as impalement protection (for rebar or similar protruding objects) at grade or above grade when used in accordance with the Installation Instructions. Please contact the manufacturer or distributor if the Installation Instructions are missing or illegible. Failure to properly install protective covers will significantly decrease any impalement protection that may otherwise be provided and may result in serious injury or death. Inspect for damage prior to use; do not use damaged or defective protective covers. Discard protective cover if positioning fins are missing or damaged. Protective coves are not approved for use for fall distances greater than 7 feet 6 inches, or as protection for weights above 250 pounds. 5

6 6 FENCING

Rugged and reusable 03-900 9 lb Orange 4'

03-901 17 lb Orange 4' x 100' Diamond Mesh

100' Lightweight- 48 Rolls/Pallet 03-904

Lightweight 4' x 100' barrier fence - 48

FENCING Smooth top and bottom Heavier and

fencing Medium tensile strength - MD: 160

tensile strength - MD: 180 lbs / ft; HD:

03-906-MGO 14 lb Diamond 4' x 50' Orange

7 FENCING GENERAL PURPOSE FENCING Orange Polyethylene Highly visible UV stabilized Rugged and reusable lb Orange 4' x 50' Diamond Mesh - 35 Rolls/Pallet lb Orange 4' x 100' Diamond Mesh - 16 Rolls/Pallet lb Orange 4' x 100' Lightweight- 48 Rolls/Pallet lb Orange 4' x 100' Lightweight - 48 Rolls/Pallet KRYPTONITE FENCING Lime Polyethylene Highly visible UV stabilized Rugged and reusable lb Lime Lightweight 4' x 100' barrier fence - 48 Rolls/Pallet MEDIUM AND HEAVY GRADE FENCING Smooth top and bottom Heavier and more visible than light duty diamond fencing Medium tensile strength - MD: 160 lbs / ft; HD: 100 lbs / ft Heavy-duty tensile strength - MD: 180 lbs / ft; HD: 176 lbs / ft Rugged and reusable MGO 14 lb Diamond 4' x 50' Orange -30 Rolls/Pallet MGO 23 lb Diamond 5' x 50' Orange - 30 Rolls/Pallet HDO 32 lb Diamond 4 x 100 Orange - 48 Rolls/Pallet 7

Circle Cortina Industries Canada Limited United States 800-225-5206 workzone@cortinaco.

8 Circle Cortina Industries Canada Limited United States Canada Cortina Safety Products Group CSPG-STDRD

STOP SLOW SIGNS STOP/SLOW PADDLES QUICK DEPLOY STOP SIGN

FL AGGER PRODUCTS 2 STOP SLOW SIGNS STOP/SLOW PADDLES STOP SLOW SIGNS Paddles meet MUTCD Requirements Silk Screened or reflective with Engineer Grade,HI-Intensity, or Diamond Grade Sheeting Letter size