kent-automotive.com 888.YES.KENT ( ) SAVE 30% and Earn I-CAR Credit Hours in Your Shop at Your Convenience with Kent Automotive

Transcription

1 kent-automotive.com 888.YES.KENT ( ) SAVE 30% and Earn I-CAR Credit Hours in Your Shop at Your Convenience with Kent Automotive

2 Table of Contents Restoring OEM Corrosion Protection Pages 3 6 Evaluate damage to the original protective coatings Prepare metal surfaces Select the correct protective coatings Finish to maximize corrosion protection Automotive Plastic Repair Pages 7 9 Identify the correct Kent repair material for the part Prepare a plastic part for repair Apply the correct Kent products to complete the repair Finish the repair Duplicating OEM Seam Sealers Pages 9 11 Identify the different types of seam sealers Choose the most effective seam sealer Prepare seams for sealing Apply seam sealers to duplicate the look and function of the OEM material Applicable Roles Estimator Steel Structural Technician Aluminum Structural Technician Non-Structural Technician Refinish Technician Auto Physical Damage Appraiser Kent Automotive can help you maintain your Gold Class status with the training and products you need most. As an ASE certified I-CAR training provider, Kent Automotive offers hands-on training in your shop, on your schedule, at an average of 30% savings than if you were to go through I-CAR directly*. * Students who successfully complete this approved training are eligible to apply for I-CAR credit hours.

3 Inner Panel and Outer Panel Rustproofer Kit with Wand Inner Panel Rustproofer A superior wax-based penetrating rust and corrosion preventive for all inner metal surfaces. Penetrates to protect inner panels, seams and creases May be spot and MIG welded through Will not produce corrosive by products during welding Restores factory-applied rust/corrosion protection Low VOC content Outer Panel Rustproofer A heavy-bodied rustproofer provides superior rust/ corrosion protection for underhood and underbody panels. Protects outer panels, provides maximum protection Heavy body stays where it is sprayed Excellent adhesion, build and flexibility Extension Wand 3 foot long wand with 360 spray nozzle Use to apply inner or outer panel rustproofer in inaccessible areas like frame rails, quarter panels and cowls Works with Nos. P60305 and P each Inner and Outer Panel Rustproofer 24 Oz. Aerosol Cans Includes 1 Aerosol Extension Wand (KT14725) KL192 Underbody Cavity Wax Protects against rust, salt and corrosion Creeps and penetrates Never becomes brittle or loses adhesion Available in two viscosities: Heavy-Duty (HD) 2,000 cps and Extreme Duty (ExD) 3,000 cps 850 ml Shutz can for easy application P30025 or BUY individually HD Underbody Cavity Wax Kit: 4 KT14995 Underbody Cavity Wax and 1 Siphon Gun P30025 ExD Underbody Cavity Wax Kit: 4 KT14996 Underbody Cavity Wax and 1 Siphon Gun P30025 KL218 KL219 Corrosion Protection 3 Inner Panel Rustproofer Inner Panel Rustproofer Outer Panel Rustproofer Outer Panel Rustproofer P60310 P60305 Aerosol Extension Wand Kit Pkg. Qty. Aerosol Extension Wand Kit KT or BUY individually Underbody Cavity Wax HD Underbody Cavity Wax (Heavy-Duty), 850ml Shutz Can ExD Underbody Cavity Wax (Extreme Duty), 850ml Shutz Can KT14995 KT14996

4 DTM High Build Epoxy Primer 2K A direct-to-metal epoxy primer designed for metal, aluminum and other substrates. Provides superior adhesion Outstanding corrosion protection High build primer and sealer Exceptional filling properties Epoxy-based 2-part technology Can also be used on SMC and fiberglass High Build Primer Surfacer A high solids, colored primer that provides superior adhesion, fill qualities and flexibility. Excellent hiding Works on flexible or rigid substrates Excellent filling properties Superior adhesion Easy to sand Weldable Copper Primer A one-part copper primer for restoring protection on inner, outer and structural body panels. Protects inner, outer and structural panels during spot welding Provides superior conductive properties protects by leaving no corrosive by-products Fast drying and good adhesion excellent for all applications Less spatter, less clogging Speeds repair saves time DTM 2- Epoxy Primer Kit: Primer, One Gallon; Hardener, One Quart *Sold only as a kit KT14677* Gray Color, 16 Oz. Aerosol Can, 12/Case KT Oz. Aerosol KT13821 Stop wasting time and money with ordinary hole saw spot weld cutters Corrosion Protection 4 Kent s Supertanium Pro-Bit spot-weld remover eliminates walking, completely removes the entire spot weld plug and doesn t require secondary grinding of spot weld plugs. Yet Another Way Kent Automotive Helps You Accelerate Your Performance. Outer Panel Inner Panel Completely removes spot weld plug Leaves inner panel intact Available in sizes and configurations for every application.

5 Weld-Thru Self Etching Primer Excellent adhesion of self-etching primer and corrosion protection for bare metals Adheres to welded surfaces and provides advantage of Weld-Thru primer Dry to touch in 10 minutes Features large button that provides spray gun pattern Gray, 20 Oz. Aerosol Can, 12/Case KT13402 Weldable Zinc Primer OEM zinc coatings on inner, outer and structural steel body panels. Highly corrosion-resistant over 90% dry film zinc Restores factory-level corrosion protection May be spot or MIG welded through Dries fast excellent adhesion Restores OEM coating Low VOC content no chlorinated solvents, air quality compliant Available in easy-to-use aerosol and handy brush top can Electrically conductive Speeds repairs, provides long-term protection Saves time Ideal for spot touch-up repair 16 Oz. Aerosol Can, 6/Case P60295 Self Etching Primer A single component, self-etching primer for use over bare metal to provide a solid base for high build primers and paints. Adheres to bare steel, aluminum and stainless steel Used for overall refinishing or spot repairs Special blue-gray color covers easily with any color paint No chlorinated solvents Low VOC content ready-to-spray quart can Dries fast saves time Must be primed prior to topcoat 20 Oz. Aerosol Can, 12/Case P60285 Sandable Self Etching Primer DTM Primer Turn Your Cost Center Into A Profit Center Corrosion Protection 5 A primer with excellent adhesion to bare metals, aluminum and prepared surfaces. Dry to touch in 10 minutes Dry to sand in 15 minutes Dry to topcoat in 15 minutes Large spray button with spray gun pattern Gray, 20 Oz. Aerosol Can, 12/Case KT13400 A direct-to-metal primer formulated to match OEM coatings for fast and easy touch-up of support rails, trunks and engine compartments. Matches OEM primers such as e-coats Easy-to-use aerosol with no messy cleanup Superior hiding Applies directly to metal for fast touch-up Can be topcoated if needed Available in three OEM colors: olive green, black and gray Black, 16 Oz. Aerosol Can Gray, 16 Oz. Aerosol Can Olive Green, 16 Oz. Aerosol Can KT15099 KT15100 KT15101 Kent's proprietary Product Reimbursement Operating System (PROS) tracks the costs, profits and charge-backs of nearly every product used in a repair. It's easy, flexible and only avaliable through your partnership with Kent Automotive.

6 Stone Guard/Underbody Stone Chip Protector Rubber Guard and Low VOC Rubber Guard An easy-to-spray under-paint coating that protects underbody panels from stone chips and road debris damage. Quick drying Paintable Light orange peel texture No messy cleanup Stone Guard is great for lower door skins, rocker panels, trunks, rear quarter panels and underbody Aerosol available in three colors Underbody Stone Chip Protector is great for underbody protection Shutz can available in two colors Corrosion Protection 6 Kit: 4 KT14767 Black Underbody Stone Chip Protector and 1 Siphon Gun P30025 Kit: 4 KT14768 Gray Underbody Stone Chip Protector and 1 Siphon Gun P30025 KL141 KL142 Black, 20 Oz. Aerosol Can Gray, 20 Oz. Aerosol Can Beige, 20 Oz. Aerosol Can Black, 29 Oz. Shutz Can Gray, 29 Oz. Shutz Can or BUY individually KT11001 KT11002 KT11003 KT14767 KT14768 A synthetic rubber-based coating formulated to withstand abrasion, temperature extremes and exposure to sun, water, ice and snow. Recommended for wheel wells, door skins, trunk area and seams. Performance Characteristics Tough and quick-drying Matches OEM color, finish and texture No CFCs Easy-to-use aerosol can available in two formulations Easily paintable Provides excellent coating that withstands abrasion and creates an excellent sound deadener Ford Tox (P50086) Siphon Spray Gun provides convenient, easy application for use with 1 quart cans Low VOC 24 Oz. Aerosol Can, 12/Case Low VOC 1 Quart Shutz Can Kit: 4 KT14796 Rubber Guard and 1 Siphon Gun P30025 *Fits P30025 and KT13631 KT14912 KT14796 KL208

7 Chem-Weld E-P Chem-Weld I A specially formulated two-part repair compound for thermoplastic automotive body panels such as TPO, polypropylene, olefin-based plastics including EPDM, and similar substances. Suitable for rigid semi-plastic fenders, bumper covers, body panels, exterior trim, fender extensions, roofs, deck lids, trim moulding, consoles and armrest supports. Designed for all thermoplastics No special preparation or adhesion promoters 100% solids no solvents or VOCs Eliminates need to identify type of plastic Will not crack, pinhole or shrink No isocyanates Excellent adhesion in 20 minutes Sands and feathers in 15 minutes paintable in less than 30 minutes 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers P10615 Four Cartridges with Applicator Gun P Oz. Job Size P10641 Four 1.7 Oz. Job Size with Applicator Gun P6812 Two-part plastic repair compound for repairing flexible plastics. For all flexible interior and exterior parts. No adhesion promoters or special preparation required 100% solids no VOCs Makes durable long-lasting repairs in all types of flexible thermoset plastic will not crack or pop out Sands and feathers in 15 minutes paintable in less than 30 minutes No solvents won t shrink, crack or bubble paint 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers Four 10 oz. Cartridges with Applicator Gun P10531 P6834 Kent-Glaze Polygrit Plastic Repair 7 A specially formulated flowable glazing putty for flexible and semi-rigid thermoset and thermoplastic body panels. Use to fill abrasions, gouges, scratches and other cosmetic damage. Also used to fill pin holes and sand scratches in Chem-Weld repairs. No special preparation or adhesion promoter Four-minute work life Cures quickly sandable in 15 minutes Paintable in less than an hour Will not shrink, crack or bubble paint No VOCs Speeds minor repairs Ideal product to finish off Chem-Weld I, II and E-P repairs Kent-Glaze 16 Fl. Oz. with Hardener P91008 Mild, water-based abrasive specially formulated to quickly clean and scuff bare and painted plastic or metal parts. Preparing all types of plastic components for subsequent repair and/or painting. Removes caked-on dirt, road film and water-soluble soils and gloss from paints, plastics and clearcoats for better adhesion. Universal formula Improves adhesion of Kent repair material, paint and primers Will not swell, distort or damage plastic parts Leaves no residue No chlorinated solvents or isocyanates * Not available in California 12 Fl. Oz. Flip-Top Bottle P10642

8 Polyprep AP Strong water-based degreaser/dewaxer formulated to prep thermoplastics prior to repair or painting. Removing grease, silicones, waxes and fingerprints from thermoplastics (e.g., TPO) before repair and refinishing materials are applied. Performance Characteristics No solvents to interfere with the cure of repair materials Specially formulated to work with Chem-Weld E-P Thoroughly removes wax, grease Rinses clean, leaving no film and mould release agents or residue 22 Fl. Oz. Spray Bottle P10643 Gallon Bottle P91006 Plastic Quick Fix A specially formulated two-part repair compound designed to be used to repair a broad range of plastic. Fast cure working time 2 to 3 minutes Ideal for replacing and reinforcing rips or tears in plastic Can be used on PP, EPDM, Xenoy, ABS, PPO, RIM, etc. Sandable in 10 minutes, paintable in 30 minutes Bead size 3/8" maximum, 1/8" minimum 10 Fl. Oz. Dual Cartridge KT13139 with Two Square Turbo Mixers 1.7 Oz. Job Size with One Turbo Mixer KT13140 Six 1.7 Oz. Job Size with Applicator Gun KL193 Chem-Weld 45 A rigid, heavy-bodied adhesive designed for structural repairs to SMC, fiberglass and other rigid plastic body panels to metal space frames. Performance Characteristics High bond strength provides excellent adhesion 100% solids no chlorinated solvents or VOCs Non-sag formula allows large beads (3/8" to 1/2") to fill gaps between body panel and space frame No solvents will not shrink or crack Work life: 45 minutes Use Chem-Weld 45 on large panels 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers P10611 Four Cartridges with DSG-2 Applicator Gun P6830 Plastic Repair 8 Plastic Repair Structural Backing Patch A combination of fiberglass, cloth, fiberglass reinforcement tape and release film designed to provide additional strength to the repair. Use with Chem-Weld E-P, I, II or 45 for added strength when needed. Performance Characteristics Conforms to irregularshaped repairs Adhesive back helps hold in place 5" x 72" Sheet (12.7cm x 1.8m) KT13765 Chem-Patch 45 A specially designed filler and finishing material for cosmetic repairs to SMC, FRP and similar glass fiber-reinforced rigid plastics. No special preparation or adhesion promoters Thermal coefficient of expansion matches original part 100% solid no VOCs Eliminates halo effect, providing a proper repair won t shrink, crack or pop Four minute work life sands and feathers in 15 minutes, paintable in less than 30 minutes Used for the front side of Chem-Weld 45 repairs Chem-Patch Fl. Oz. with Hardener P10620 Chem-Weld 15 A rigid, heavy-bodied adhesive designed for structural repairs to SMC, fiberglass and other rigid plastic body panels to metal space frames. Performance Characteristics High bond strength provides excellent adhesion 100% solids no chlorinated solvents or VOCs Non-sag formula allows large beads (3/8" to 1/2") to fill gaps between body panel and space frame No solvents will not shrink or crack Work life: 15 minutes Use Chem-Weld 15 for small jobs 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers KT13968

9 Plastic Repair Urelastic Primer/Filler Flexible primer/filler for quick and easy finishing of all common types of plastic automotive components. Filling pinholes and scratches and priming flexible/rigid plastic parts. Also ideal for metal. One-part product no mixing required High solids content fills fast, saves material Dries in only 20 minutes Light gray color covers with fewer coats Flexes with plastic parts Sands smoothly without clogging sandpaper Compatible with all common auto parts No isocyanates No CFCs Ford Tox Anti-static additives 16 Oz. Aerosol Can One Quart Can P50240 P60100 Introducing The New kent-automotive.com The Same On-Site Service You Get Today With ANYTIME Online Access + Over 5x more products + Up-to-date product and technical information + Fast ordering + Easy search + Special online offers + Hassle-free returns* * Standard return policy applies. See return policy for details. Flex-E-6115 Medium Viscosity Flex-E-6001 Flow Grade Flex-E-6020 High Build Seam Sealers 9 Semi-self-leveling, two-component seam sealer. Roof channels, pickup beds, drip rails, trunk openings and other horizontal seams. High viscosity, high build that self-levels no tooling or sanding required 15% greater viscosity than Flex-E minute work life Paintable in 30 minutes 100% solids no VOC 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers KT12401 High-strength, fast-curing and self-leveling seam sealer developed with Ford Motor Company. Recommended for roof-seam sealing of Aerostar, Bronco, Escort, Explorer, Villager and Windstar vehicles. Also used on drip rails and trunk opening seams on various other makes. Self-leveling no need for tooling or sanding 15 minute work life Paintable in 30 minutes sandable in 60 minutes Oven-bakeable 350 F (176 C) Two hour full cure at 68 F (20 C) High bond strength up to 1,470 PSI No VOCs 10 Fl. Oz. Dual Cartridge with P10486 Two TM-3 Turbo Mixers, 4/Case Four Cartridges with Applicator Gun P6826 Fast curing, high viscosity non-sag two-component seam sealer that provides maximum build. Recommended for door sills, door skins, wheel arches, trunk seams, hatch openings, vertical and overhead seams. 20% greater viscosity than Flex-E-6000 Maximum non-sag ideal for maximum build 8 to 10 minute work life Paintable in 30 minutes sandable in 20 minutes 100% solids no VOC 10 Fl. Oz. Dual Cartridge with Two Turbo Mixers Four Cartridges with Applicator Gun KT12400 KL194

10 DTM High Build Seam Sealer Quick Seal MSP A heavy-body two-part seam sealer designed for exterior and interior applications. Non-sag formula with extended working time (10 to 15 minutes) Excellent adhesion to many surfaces including bare metal* Black color matches many OEM sealers Holds tool marks for desired finish Paintable in 60 minutes Remains flexible, will not shrink or crack An MS polymer-based seam sealer designed for all automotive surfaces and paint systems. Fast skinning, one-part product Paintable wet or dry in 30 minutes (paint within 72 hours) Compatible with all paint and clearcoats Excellent adhesion to both primed and unprimed surfaces Easy-to-use pressurized dispenser with trigger lever no caulking gun required Special ribbon tips available *For best results always follow OEM recommendations for priming procedures 10 Oz. Dual Cartridge with Turbo Mixers KT14999 Four Cartridges with Applicator Gun KL200 Quick Seal MSP 12 Oz. Pressure Pak, Neutral (Beige) Quick Seal MSP 12 Oz. Pressure Pak, Gray Quick Seal MSP 12 Oz. Pressure Pak, Black Quick Seal MSP 12 Oz. Pressure Pak, White KT13977 KT13978 KT13979 KT15176 Quick Seal Quick Seal 2000 Seam Sealers % solids polyurethane seam sealer for painted or primed parts, steel, aluminum, galvanized metal and plastic. Eliminates cracking, peeling and shrinking. Available in neutral and black for matching adjoining parts or easy painting. Can be used on automotive finishes or primer without adhesion promoter. Sealing seams on practically all automotive surfaces, including aluminum, steel and most plastics. Paintable immediately or any time after curing 100% solids will not shrink or crack No sagging on vertical surfaces Bakeable in bodyshop paint bake ovens up to 200 F (93 C) Resealable screw-top cartridge accepts various applicators and nozzles Withstands intermittent temperature to 325 F (163 C) for ten minutes GM ; Ford Tox Nos.: Neutral ; Black Fl. Oz. Cartridge Neutral with 3" Nozzle, 12/Case P Fl. Oz. Cartridge Black with 3" Nozzle, 12/Case P ml (10 Oz.) Sausage Pack, Neutral KT13437 * Sausage Pack Starter Kit: 18 KT13437 Neutral Sausage Packs KL195 with Applicator Gun KT13483 *Must use sausage applicators. One-part, sprayable, modified urethane seam sealer. Matches OEM sprayable sealer, and can be painted and baked immediately after application. Applied with an air applicator gun, a variety of textures can be achieved using tooling and air flow pressure. Adheres to primed or painted plastic body panels or bare metal surfaces. Extremely flexible, it can be used on vertical as well as horizontal surfaces. Sprays on easily and evenly to form a tough, water-resistant seal. Use on floor and trunk seams, to deaden sound or to protect against stone chips and corrosion. Non-sag formula Non-isocyanate formula Excellent adhesion flexibility and durability Use on primed or painted plastic or bare metal surfaces Paintable and bakable immediately best to paint within 72 hours Brushable if needed Ford Tox Gray/Neutral 9.8 Oz. Screw Top Cartridge with Tip, 12/Case Black 9.8 Oz. Screw Top Cartridge with Tip, 12/Case Beige 9.8 Oz. Screw Top Cartridge with Tip, 12/Case Kit: 12 Gray/Neutral with Applicator Gun KT13778 Kit: 12 Beige with Applicator Gun KT13778 Kit: 12 Black with Applicator Gun KT13778 P13706 KT12592 KT14093 P13746 KT14684 KT14685

11 Quick Seal Sprayable High-Tech Clear One-part, sprayable, modified urethane seam sealer. Matches OEM sprayable sealer, and can be painted and baked immediately after application. Applied with an air applicator gun, a variety of textures can be achieved using tooling and air flow pressure. Adheres to primed or painted plastic body panels or bare metal surfaces. Extremely flexible, it can be used on vertical as well as horizontal surfaces. Sprays on easily and evenly to form a tough, water-resistant seal. Use Quick Seal on floor and trunk seams and to deaden sound. Non-sag formula Non-isocyanate formula Excellent adhesion flexibility and durability Use on primed or painted plastic or bare metal surfaces Paintable and bakable immediately best to paint within 72 hours Brushable if needed 9.8 Oz. Cartridge with Standard Nozzle Gray KT Oz. Cartridge with Standard Nozzle Black KT Oz. Cartridge with Standard Nozzle Beige KT Oz. Cartridges with Standard Nozzles Gray Includes Applicator Gun KT14329 KL Oz. Cartridges with Standard Nozzles Black Includes Applicator Gun KT14329 KL Oz. Cartridges with Standard Nozzles Beige Includes Applicator Gun KT14329 KL234 *Must be ordered separately. Does not come with cartridge. While Supplies Last Developed as a problem-solving water-clear sealer, High-Tech adheres to all automotive paints and can be applied to wet or dry surfaces. Excellent for base coat/clearcoat systems, enamel, lacquer and urethane paints, galvanized metal, aluminum, glass, plastics and primers. Typically used for door skins, drip rails, tail lights and trunk seams. Non-yellowing Paintable Will not crack, peel or shrink Mixable with automotive paint to color match seams Smooth feathering for undetectable repairs Quick skin-over reduces dust pickup GM ; Ford Tox Nos , and ; Chrysler Nos AA, AB and AA 5 Fl. Oz. Tube Grade, 12/Case P Fl. Oz. Cartridge Grade, 12/Case P Fl. Oz. Pump Grade, 12/Case P10567 Brushable White Seam Sealer Flex-E-6000 Non-Sag Seam Sealers 11 Easy-to-use brush grade that combines Kent s unique wet/dry system with non-asbestos technology. Duplicates original OEM appearance. Use on lap seams on door skins, firewalls, floor pans and in trunks of cars; similar uses on trucks and recreational vehicles. Seals wet or dry surfaces Full-bodied, fast-drying formula Retains flexibility Will not bleed, chalk or peel Paintable Easy cleanup with Kent Acrysol 16 Fl. Oz. Can, 6/Case P10120 Fast-curing, two-component seam sealer that quickly and permanently seals seams. Outperforms typical one-part sealers and features a neutral color for easy coverage with any color paint. Recommended for door sills, door skins, trunk seams and hatch openings. 8 to 10 minute work life Paintable in 30 minutes sandable in 20 minutes One-hour handling time full cure in two hours Ten times stronger than ordinary one-part sealers Allows oven baking immediately after painting withstands 350 F (176 C) 100% solids no VOCs Compatible with OEM plastisol sealers 10 Fl. Oz. Dual Cartridge with Two TM-3 Turbo Mixers, 4/Case Four Cartridges with Applicator Gun P10491 P6822

12 ON-SITE SERVICE ONLINE ACCESS The same on-site service you get today with anytime online access + Over 5x more products + Up-to-date product and technical information + Special online offers + Fast ordering + Easy search + Hassle-free returns * Register at the new kent-automotive.com * today! In Canada: kent-automotive.ca kent-automotive.com 888.YES.KENT ( ) 8770 W. Bryn Mawr Ave., Suite 900, Chicago, IL Copyright 2013 Kent Automotive. All rights reserved. Printed in USA (01/13) E1206 *Standard return policy applies. See Return Policy for details. Prices and offers are effective January 15 through April 30, Cannot be combined with any other offer and does not apply to prior purchases. Offers are not transferable and do not have any cash value. Government entities, corporate accounts or public tax-supported institutions may not be eligible. Only available in USA and Canada. Subject to applicable laws and regulations. Call Your Kent Representative Today to Save 30% on I-CAR Training