DF Rivet Bit 4.3mm TYX Coated Drill Bit. DF-5125P Self-Centering Rivet Drill. DF Rivet Bit 6.8mm TYX Coated Drill Bit

Size: px

Start display at page:

Download "DF Rivet Bit 4.3mm TYX Coated Drill Bit. DF-5125P Self-Centering Rivet Drill. DF Rivet Bit 6.8mm TYX Coated Drill Bit"

Luke Woods
6 years ago
Views:

1 DF Rivet Bit 4.3mm TYX Coated Drill Bit Specialized Self-Centering Rivet Drill Bit DF-5125P Self-Centering Rivet Drill Self-piercing,Blind, Dome, and Drive Pin rivets all need to be removed and our new "Rivet Drill" has come to the rescue! Simple in design, yet essential for anyone who works on aircraft, auto, bus or trucks. Removing panels of aluminum, stainless steel or steel riveted to aluminum is time consuming. Centering on the top of a pop rivet is very difficult and is often impossible. The "Rivet Drill" grabs around the rivet head ensuring proper centering and no slippage. The rivet head will be completely drilled saving time and damage. The tip of this drill can be changed for centering on any size rivet head. DF Rivet Bit 6.8mm TYX Coated Drill Bit Specialized Self-Centering Rivet Drill Bit

DF-516 Hole Punch Plier I-CAR has recommended a 5/16" hole when plug welding on frame rails and other structurally significant points. This is the tool used in I-Car classes.

This tool is so effective you will wonder what you ever did without it. With the Course brush, undercoating and seam sealer are stripped away easily and cleanly, right down to the bare metal.

2 DF-516 Hole Punch Plier I-CAR has recommended a 5/16" hole when plug welding on frame rails and other structurally significant points. This is the tool used in I-Car classes. An adjustable depth allows precision placement of each and every hole. DF-700DX The Eliminator Inline Undercoat and Decal Remover Deluxe Kit If you don t have one you need one. This tool is so effective you will wonder what you ever did without it. With the Course brush, undercoating and seam sealer are stripped away easily and cleanly, right down to the bare metal. The Brushes do not clog up. Remove rust and scale with the Medium brush and the fine brush is perfect for getting paint out of tight spaces. The geared Decal Eraser will strip a 2 foot by 2 foot decal in less than 2 minutes with no paint burn. The eraser is ideal for removing the adhesive backing on moldings and badges. This inline version of the tool carries a year warranty and our guarantee of complete satisfaction. The Deluxe Kit includes our new decal eraser for water based paint, the regular decal, 6 fiber discs, single and a double fiber disk holder, 1 course and 1 fine 23mm brush and the new 11mm course and fine brush with holder. Everything organized in a blow molded case.

DF-701 Right Angle Undercoat, Seam Seal, Rust and Decal Remover Compact design lets this tool work best in tight areas, like wheel

The included decal eraser makes quick work of large stickers and decals. Eliminate labor intensive work with this economical tool.

This deep Mega C-clamp allows the technician to bring the drilling point six inches into the panel.

3 DF-701 Right Angle Undercoat, Seam Seal, Rust and Decal Remover Compact design lets this tool work best in tight areas, like wheel wells. Remove thick sealer and undercoating with ease. Strips right down to bare metal with the 3 MBX Course brushes. The included decal eraser makes quick work of large stickers and decals. Eliminate labor intensive work with this economical tool. DF-SPD48M Mega C-Clamp Accesory Clamp for the Spot Annihilator. This deep Mega C-clamp allows the technician to bring the drilling point six inches into the panel. Perfect for trunk hinges and any place a spot weld is located deeper in the panel. DF-903 Ring Hammer Get into the tightest spaces, use as dolly inside a door panel. Light enough to always be on your finger, heavy enough at 9 ounces, to get the job done. Sold Individually

DF-CT887 Slimline Plastic Riveter This compact plastic rivet plier is perfect for tight places. Use on vehicles where plastic rivet clearance is minimal.

4 DF-CT887 Slimline Plastic Riveter This compact plastic rivet plier is perfect for tight places. Use on vehicles where plastic rivet clearance is minimal. Plier is 1 inch tall and requires 2 inches clearance to fully pull rivets. No pumping needed. Saves time and disassembly effort! Specifically designed for plastic rivets. Designed and patented in the U.S.A. Includes plastic case and rivets. DF-CT886 Molding Release Tool This molding release tool will easily slice through double sided adhesive tape to quickly free door moldings and badges. The ergonomic handle allows force to be applied in the proper direction.

DF-517 ST Pneumatic Door Skin Tool How long does it take to fold a door skin over - forty minutes to an hour, perhaps. With the new Door Skin Tool you can do it in 10 minutes or less.

Set the flow valve to the lowest setting to start. The first impacts fold the door skin over 45 degrees. The articulated C-Brace allows the final closing fold to be made smoothly and cleanly.

With the new Door Skin Tool the cosmetic side of the skin remains un-blemished with a perfectly folded inside lip. No need to cut a door skin to save time.

5 DF-517 ST Pneumatic Door Skin Tool How long does it take to fold a door skin over - forty minutes to an hour, perhaps. With the new Door Skin Tool you can do it in 10 minutes or less. The Door Skin Tool sets the distance between the specially designed striking chisel and the rubberized dolly plate. Use of a long stroke air hammer is essential. Set the flow valve to the lowest setting to start. The first impacts fold the door skin over 45 degrees. The articulated C-Brace allows the final closing fold to be made smoothly and cleanly. The rubberized strike plate can be adjusted up and down to ensure a tight closure. Other tools damage the cosmetic side of the door skin requiring filler and labor. With the new Door Skin Tool the cosmetic side of the skin remains un-blemished with a perfectly folded inside lip. No need to cut a door skin to save time. No more send backs from the paint department. The door skinner kit DF-517 includes the CP-715 Long stroke air hammer, the skin tool itself, two chisels, the fitting and the aluminum case. Dent Fix Equipment DF-700 Eliminator Undercoat Remover The DF-700 Eliminator removes undercoated quickly and cleanly. The coarse wire brushes do not clog up like grinding discs. The fine brush is great for removing paint from tight areas. The medium brush is used for cleaning rust. The large geared eraser is removes large decals without burning the paint and is perfect for the cleaning off the adhesive from moulding strips. Kit includes 3 course brushes, 1 eraser wheel Dent Fix Equipment DF-904 GLUE PULLER KIT

6 Dent Fix Equipment DF703 MBX COURSE REPLACEMENT BRUSH

CUT OUT FLARES INSTALLATION INSTRUCTIONS FOR 20017, 20018, F100-F150 F250-F350 P.U. & BRONCO CUT OUTS

20017 04/22/03 REV-A CUT OUT FLARES INSTALLATION INSTRUCTIONS FOR 20017, 20018, F100-F150 F250-F350 P.U. & BRONCO CUT OUTS Tools Required for Installation: (A) 3/16 Drill Bit (B) Pop-Rivet Gun (C) Air