Sonic Tooling the Geoprobe Way

Transcription

1 800-GEOPROBE S ONICTOOLING. G.COM

2 Sonic Tooling the Geoprobe Way When we began development of the Geoprobe Sonic Tooling product line more than 10 years ago, it was with the understanding that we would do things the Geoprobe Way: we design the product, we build the product, we submit the product to rigorous field testing, and we continually improve the product. The product is made to the highest quality standards and it is on the shelf. When you call Geoprobe you can speak to a Sonic Tooling expert who is experienced with tooling in a variety of geologic settings and can advise you in tooling selection and application technique. We are not content to do what has already been done. There is a better way to do things, a better way to design things, and we aim to find those better ways and supply them to our clients. That s why you can find Geoprobe Sonic Tooling going into the ground almost every day at Geoprobe and that s why you will find sampling systems in this brochure that are exclusive to Geoprobe. Geoprobe Sonic Tooling is made to the highest quality standards and backed by unsurpassed customer service. That s the Geoprobe Way. ENGINEERED Geoprobe Sonic Tooling is Engineered and tested for maximum strength and durability by folks who manufacture Sonic Drill Rigs. Continual Product Improvement Exclusive Sonic Tooling Systems (SDT45, SDT60) Innovation to Conventional Sonic Sampling MANUFACTURED Geoprobe provides excellence in the Manufacturing of superior quality rotary sonic tools. Solid Steel Sonic Casing ( No Welds ) Exclusive Heat Treatment Process Proprietary Thread Design for ease of make-up / break-out SUPPORTED Geoprobe Sonic Tooling is Supported by the people at Geoprobe Systems who have served the drilling industry for more than twenty-five years! Unequaled Product Availability! Unsurpassed Customer Service! Order Today:

3 In Your Industry What Industries Use Geoprobe Sonic Tooling? Environmental Geotechnical Geothermal Exploration You are looking at Geoprobe 4x6 Sonic Tooling in Action. Seen here, 4.5 in. inner rods advance 4.5 in. core barrels which are overcased by 6 in. sonic casing. Turn to pg 8 to see why Geoprobe conventional Sonic Tooling Systems are more than conventional. Geoprobe Model 8140LC 3

4 Why Geoprobe Sonic Tooling? 3.5 in. 4.5 in. Geoprobe Systems offers a full family of Sonic tooling, including casing in a wide range of sizes, bits to match, inner rods, samplers, liners, and retainers. All of this tooling is available from your single Geoprobe source. Our Sonic Tooling includes unique sampling systems available only from Geoprobe. All sizes of Geoprobe Sonic Casing are made from non-welded solid body tubulars with heat treated ends. All heat treatment, metal improvement, and machining is performed by Geoprobe 6 in. Systems to give you the high quality and consistency you have come to expect in a Genuine Geoprobe product. Geoprobe Sonic Tooling joints are engineered for ease of make-up and break-out with no galling or deforming in the thread area. Field operators report they can immediately tell the difference. Our sonic tooling offers you the widest array of bits and sampling systems available; from conventional telescoping in. nominal soil coring to dual tubing and face flush bits for rock coring. It s all available from Geoprobe, it s economically priced and it s on the shelf now in. nominal Geoprobe Sonic Casing: No Weld Casing Multiple Uses: On the Shelf - Conventional Sonic Sampling ( 4x6, 6x8, 8x10) Variety of Lengths - Dual Tube Sonic Sampling ( SDT45 & SDT60 ) - Single Casing System: Cased Hole w/o Sampling 4

5 Geoprobe Sonic Results SDT60 LimeStone e The Results You Need Geoprobe Systems Sonic Tools provide you many options and configurations that give you reliable and consistent project results. Whether you re sampling soils in the Environmental industry OR needing Geotechnical data for construction OR, penetrating rock for bedrock wells or Sonic 6x8 Soils Sonic 4x6 Sandstone SDT45 Soil Transition Exploration projects OR you need a cased hole for Geothermal applications Geoprobe Sonic tooling provides a wide assortment of options and gives you the results you need. SDT45 Granite Sonic 4x6 Aquitard You just can t see the geology unless you re looking at a good sonic core! Mark Schock, Owner, Glacier Drilling, Durham, CT 5

6 Casing & Accessories Geoprobe Sonic Casing and Accessories Geoprobe Sonic Casing is the foundation of our Complete Tooling Systems. See below for a full list of our casing by size as well as associated accessories. 6 in. 4.5 in. 3.5 in. 3.5 SONIC CASING 120 in. SL PN: SONIC CASING 60 in. SL PN: SONIC CASING 24 in. SL PN: SONIC CASING 12 in. SL PN: SL SWIVEL PULL CAP PN: ADPT 3.5 SL PIN TO 4.5 SL PIN PN: ROD WIPER DONUT PN: SONIC CASING 120 in. SL PN: SONIC CASING 60 in. SL PN: SONIC CASING 24 in. SL PN: SONIC CASING 12 in. SL PN: CASING SHOE CARBIDE LH SL ASM PN: CSC SL UNDER CUT ASM PN: CSC SL W/ ID CARBIDES ASM PN: SONIC LOCKING EXP PT ASM PN: SONIC EXP PT HOLDER SL PIN DN PN: CORE CATCHER 4.5 SONIC CAS- ING LH PN: ADPT SONIC SUB SAVER 4.5 in. SL PN: SL SWIVEL ASM PULL CAP PIN DN PN: ROD WIPER DONUT PN: SOIL CORE BAGS 1075 ft. ROLL 4.5 SAMPL PN: SONIC CASING 120 in. RH PN: SONIC CASING 60 in. RH PN: SONIC SAMPLER BARREL 60 in. SL PN: SONIC CASING 18 in. RH PN: SONIC CASING 12 in. RH PN: SONIC CASING SHOE CARB RH ASM PN: SONIC SAMPLER BIT ASM SL PN: CORE CATCHER WELDMENT 6 CASING RH PN: CORE CATCHER WELDMNT 6 SAMPLER LH PN: GV4 SPINDLE ASM 6.0 RH PIN PN: ADPT 3.5 in. SL PIN TO 6.0 in. SL PIN PN: ADPT 4.5 in. SL BOX TO 6.0 in. SL PIN PN: SWIVEL LIFT CAP RH SL PIN DN PN: ROD WIPER DONUT PN: SOIL CORE BAGS 1075 ft. ROLL 6.0 SAMPL PN:

7 Casing & Accessories 8 in.* SONIC CASING 120 in. RH PN: SONIC CASING 60 in. RH PN: SONIC CASING 24 in. RH PN: SONIC CASING BARREL 60 in. SL PN: SONIC CASING SHOE ASM RH PN: SONIC SAMPLE BIT ASM SL PN: BOLT ON SPINDLE ADPT RH PN: GV4 SPINDLE FLANGE TO PN: ADPT RH PIN-6.0 RH BOX PN: ADPT SL PIN-4.5 SL BOX PN: RH LOOP PULL CAP PIN DOWN PN: ROD WIPER DONUT PN: in.** SONIC CASING 24 in. RH PN: SONIC CASING 60 in. RH PN: SONIC CASING 120 in. RH PN: CASING SHOE CARBIDE RH ASM PN: ADPT SONIC RH RH PN: ADPT SONIC RH PIN-6.0 RH BOX PN: * in. (8 in. nominal) ** in. (10 in. nominal) RH LOOP PULL CAP PIN DN ASM PN: ROD WIPER DONUT PN: A BIT TO FIT Your Situation Geoprobe provides a variety of sonic bits and shoes to suite a wide range of geologies from loose sands, dense clays, cobbles, boulders, to solid bedrock. We offer bits with various carbide shapes and configurations as well as different sizes to meet your project demands. This includes: Smooth face shoes for softer sensitive soils that are unconsolidated. Carbide bits with unique water channels for cutting through consolidated formations (rock) where face flushing is needed. Specialty bits for unique applications such as ID carbides for undercutting cores and core retention. 7

8 Geoprobe Advantage! Conventional Sonic Sampling Sonic Casing (4x6, 6x8, and 8x10) Geoprobe Systems conventional sonic sampling systems provide a wide range of casing sizes and bit configurations. Conventional sonic sampling consists of driving your lead core barrel (sample collection) first and then overcasing it with a larger size casing. Once the larger casing has reached the same depth of the core barrel, the core barrel is removed, sample extruded, core barrel sent back down the middle of the larger casing and advanced out the end collecting another sample. Again, the larger casing is advanced to the same depth as the core barrel. This process is repeated to the depth desired. A long established casing configuration for this is using a 4 in. core barrel overcased with a 6 in. casing (4 x 6 Sonic Sampling). Other sonic configurations follow in this manner with larger inner and outer casing sizes. 4.5 in. 6 in in in. (8 in. nominal) (10 in. nominal) Geoprobe sonic casings have been uniquely designed with conventional sonic sampling in mind. When telescoping one casing over another, (such as 4x6) it is important to consider the spacing (annulus) between the telescoping casings. Geoprobe sonic casing is designed so that each incremental casing is sized with bit clearances, and annular space in mind. If there is too little annulus between casings, certain soils can cause them to lock up and become stuck together. If there is too much annular space between casings, then excessive water is needed to flush the soil between the casings. The Geoprobe sonic casing family has been uniquely designed so that each incremental casing size works efficiently with the next. Notice the similarities in the annular space between the casing sizes in the diagram. This results in a very efficient combination of casings for use in conventional sonic sampling applications such as 4x6, 6x8, or 8x10. Sonic Bits 8

9 4x6 Tool String Diagram Geoprobe Sonic 4x6 Tool String Diagram 9

10 6x8 Tool String Diagram Geoprobe Sonic 6x8 Tool String Diagram 10

11 8x10 Tool String Diagram Geoprobe Sonic 8x10 Tool String Diagram 11

12 Geoprobe Exclusive! Sonic Dual Tube 45 (SDT45) A Distinct Difference The Geoprobe Systems Sonic Dual Tube 45 (SDT45) is a unique and versatile sampling system that advances an outer casing and an inner soil sampler simultaneously. The SDT45 sample (3.0 in. diameter) is collected in a clear PVC liner providing a high quality representative sample. The 4.5 in. outer casing remains in the ground (cased hole) while the sample is retrieved with inner 2.25 in. probe rods. The system provides optional bits based upon geologic conditions (soils and rock) for more efficient sampling and recovery. The versatile SDT45 system can be used for many applications including, environmental sampling, varying types of well installations, cased hole applications, geotechnical borings, and exploration projects of numerous types. A Soil Sample in a DT45 PVC Liner SDT45 Parts List 4.5 SONIC CASING 60 in. SL PN: SONIC CASING 24 in. SL PN: SONIC CASING 12 in. SL PN: DT45 SAMPLE SHEATH 72 in. PN: DT45 SAMPLE SHEATH 60 in. PN: DT45 SAMPLE SHEATH 48 in. PN: PROBE ROD 60 in. PN: PROBE ROD 12 in. PN: DT45 SONIC CUTTING SHOE SL NO PN: DT45 SONIC CUTTING SHOE CARBIDE ASM PN: DT45 CORE CATCHER PN: DT45 LINER PVC 72 in. (18) PN: DT45 LINER PVC 60 in. (18) PN: DT45 LINER PVC 48 in. (18) PN: SDT45 LINER RETAINER PN: DT45 SONIC CDC BUFFER CAP 2.25 PN: DT45 DRIVE HEAD 2.25 BOX PN: DT45 DRIVE HEAD WITH CHECK BALL ASM PN: DT45 LINER RETAINER WRENCH PN: SL SWIVEL ASM PULL CAP PIN DN PN: SWIVEL PULL CAP 2.25 ROD PIN DOWN PN: ROD WIPER DONUT PN:

13 SDT45 Advantages Capable of Collecting Samples in a Clear PVC Liner Faster Trip In and Trip Out Time Compared to 4x6 Use of 2.25 in. Center Rods Results in Significantly Less Operator Fatigue High Quality Sample Integrity Provides Cased hole while working in consolidated or unconsolidated material Bit Configurations for consolidated and unconsolidated material We enjoyed 100 percent sample recovery throughout our drilling project using the Geoprobe 8140LS, SDT45 Sonic Tooling System and a carbide casing shoe, and without flushing fluids. Iain Haycock, Manager, McMillan Drilling Services, Canterbury, New Zealand 13

14 SDT45 Tool String Diagram Geoprobe Sonic Dual Tube 45 Tool String Diagram 14

15 SDT60 Tool String Diagram Geoprobe Sonic Dual Tube 60 Tool String Diagram 15

16 Geoprobe Exclusive! Sonic Dual Tube 60 (SDT60) The Largest Sonic Dual Tube Available Needing a larger sample? Want productive, efficient time in the field? Tired of handling larger casing with conventional sonic methods? Geoprobe has developed the SDT60 sampling system A Dual Tube System that advances our 6 in. casing and collects samples without the overcasing conventional method. The core barrel is advanced simultaneously with the outer 6 in. casing. Our 2.25 in. inner rods remove the core barrel and the 4.3 in. diameter sample is collected into core bags. By advancing the casing and inner rod string together, you achieve an increase in productivity and minimize the handling of casing. DT60 Sample Sheath with 2.25 in. Center Rod SDT60 Parts List 6.0 SONIC CASING 60 in. RH PN: SONIC CASING 12 in. RH PN: SONIC CASING 6 in. RH PN: PROBE ROD 60 in. PN: PROBE ROD 48 in. PN: PROBE ROD 24 in. PN: PROBE ROD 12 in. PN: DT60 SAMPLE TUBE 72 in. PN: DT60 SAMPLE TUBE 60 in. PN: DT60 SAMPLE TUBE 12 in. PN: DT60 SONIC CARBIDE CUTTING SHOE ASM PN: DT60 SONIC CUTTING SHOE SMOOTH PN: DT60 CORE CATCHER PN: DT60 SONIC CENTERING DRIVE CAP 2.25 PN: DT60 WRENCH PN: CHECK ROD 6 in. LONG PN: DT60 SHEATH DRIVE HEAD SUB 3.5 PN: DT60 SHEATH DRIVE HEAD 2.25 PN: DT60 RETAINER PN: SWIVEL PULL CAP 2.25 ROD PIN DOWN PN: SWIVEL LIFT CAP RH SL PIN DN PN: ROD WIPER DONUT PN: TUBE POLY LAY-FLAT 6MIL x 9W PN:

17 SDT60 Advantages Faster Trip In and Trip Out Time Compared to 4x6 Outer 6 in. Casing and Inner Sampler are Advanced Simultaneously Continuously Collect 4.3 in. Diameter Soil Cores True 6 in. Diameter Borehole Set 2 in. Monitoring Well Through 6 in. Casing Core Catcher Helps Provide Retention of Soil Samples Left: SDT60 sample taken from ft. below surface. Soils encountered included dense clays, saturated sands and limestone. Below: The Stainless Steel Core Catcher for the SDT60 Sampling System being placed into the sample sheath, followed by the retainer which holds the Core Catcher in place. 17

18 Unique Advantages Breakthrough Products Exclusive Dual Tube Systems Product Availability: GEOPROBE Superior Manufacturing Team Geoprobe Serving the Drilling Industry for 25 years! 18

19 For All Sonic Rigs A Geoprobe Model 8140LC Running 4x6 Sonic Sampling in a Low Clearance Location Geoprobe Sonic Tooling works with ANY sonic rig. That means ANY brand and ANY class, from mini sonics to full size rigs! 19

20 Geoprobe Systems Sonic Machines Sonic Tooling Superior Support Web: geoprobe.com SonicTooling.com Phone: OR Copyright by Kejr, Inc. Geoprobe Systems is a division of Kejr, Inc., Salina, Kansas. Geoprobe, Geoprobe Systems is a registered trademarks of Kejr, Inc. These trademarks may not be used without written permission from Kejr, Inc., Salina, Kansas. The term Geoprobe is a brand name of machines and tools exclusively manufactured by Geoprobe Systems in Salina, Kansas. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, scanning, or any information storage and retrieval system, without permission in writing from Kejr, Inc.