Use Of The RUN-TIME GRAPHICS (RTG) System
|
|
- Francis Ball
- 6 years ago
- Views:
Transcription
1 Use Of The RUN-TIME GRAPHICS (RTG) System Run-Time Graphics (RTG) Visual Software International Page 1
2 Visual Software International (VSI) provides a new approach to building software and simulations. It has cut large scale system life cycle costs by as much as an order of magnitude. This approach, embodied in the VisiSoft system, is based upon significant advancements in software and simulation technology. It provides real control and reuse of complex modules and models. It has broken the barriers to rapid development of complex systems, and supports high resolution modeling to insure validity. This is done in part by achieving graphical interfaces so that complex systems are visualized in a fully tailored user-friendly environment. This success has resulted in rapid completion of systems and simulations that easily meet customer validity constraints. It accomplishes much higher levels of system scalability. VSI has extended its simulation Run-Time Graphics (RTG) system to achieve new levels of ease of development and use. RTG illustrates the activities of complex systems and simulations as they unfold in real time or faster than real time. It allows users to interact fully with simulations while they are running. RTG provides for hierarchical icons that support, for example, the development of an aggregate facility such as a network, and the push-down of this facility into basic entities, such as various equipment of different types, with appropriate graphic interaction at each level in the hierarchy. In addition, hierarchical icon movement is supported, where icons can contain sub-icons that move independently of each other, but relative to the next level in the hierarchy. Using RTG, thousands of graphical entities are easily made visible - without screen clutter - a real breakthrough. The hierarchical RTG facility allows network managers or designers to assemble a network from an extensive library of icons, literally by point and click selection, and then have the elements move around on realistic terrain and foliage, or in the air or space, while using detailed simulated movement and traffic. This offers a valuable capability to respond to changing conditions in a real time planning environment. For example, a user can quickly devise plans to support alternative courses of action to a changing network environment, then simulate the functioning of that network to ensure that it will continue to work satisfactorily under anticipated conditions. This capability of allowing the user to modify the structure being simulated - while the simulation is running represents a major breakthrough for many applications. Run-Time Graphics (RTG) Visual Software International Page 2
3 INTERACT WITH HIERARCHICAL ICONIC MODELS WHILE THE SIMULATION IS RUNNING! 1 2 Pop the cover 1 C2 T1 C C4 C7 C5 T6 2 FIGURES1/HIERICON 2/9/99 Run-Time Graphics (RTG) Visual Software International Page
4 POP THE COVER AND ZOOM IN T1 C2 C C4 Zoom in C7 C5 Pop the cover and zoom in T6 2 C7 1 6 NCS Pop the cover and zoom in T2 T1 T L1 SES PS L2 SALESLIT2/HIERICON 2/18/99 Run-Time Graphics (RTG) Visual Software International Page 4
5 LINE CENTER RTG supports both the General Simulation System (GSS) and the Visual Software Environment (VSE). When GSS is used to simulate complex system dynmics, RTG provides dynamic visualization as events unfold. It is limited only by the modelers imagination. Similarly, VSE can be fielding real time data on any system that is dynamic, including electrical and communications networks, and traffic. The figure below is an example of a route in a communications network. Run-Time Graphics (RTG) MODEL: LINK-16 TELE_NET (SUSPENDED) SIM TIME:.21749E+01 X: 975.2, Y: SAT 5/27/99 10:18:15 BUTTONS LS 1 SS FILTER SAVE LOSS ROUTE SET F 8 ICON INST 2 LINE PLOT LEGEND MENUS YIELD PAUSE STOP QUIT CALIFORN-1 /21/01 ESCAPE DELETE UNDO REDO COVER UNCOVR ATTACH DETACH ZM - IN HOME ZM - OUT UPDATE BLINK ROTATE SCALE SIMREAL OVERLAY INTR STATUS The figures on the next page provide examples of D views of air traffic as well as radar tracking devices and communications equipment. The ability to create D background overlays is illustrated in these figures. Background overlays created for different applications include terrain, foliage, buildings, road networks, bodies of water, etc. The figures on the last page illustrate RF coverage maps on the globe. Run-Time Graphics (RTG) Visual Software International Page 5
6 Run-Time Graphics (RTG) Visual Software International Page 6
7 Run-Time Graphics (RTG) Visual Software International Page 7
Revision for Grade 6 in Unit #1 Design & Technology Subject Your Name:... Grade 6/
Your Name:.... Grade 6/ SECTION 1 Matching :Match the terms with its explanations. Write the matching letter in the correct box. The first one has been done for you. (1 mark each) Term Explanation 1. Gameplay
More informationAutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods
AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,
More informationApple Photos Quick Start Guide
Apple Photos Quick Start Guide Photos is Apple s replacement for iphoto. It is a photograph organizational tool that allows users to view and make basic changes to photos, create slideshows, albums, photo
More informationIntroduction to R Software Prof. Shalabh Department of Mathematics and Statistics Indian Institute of Technology, Kanpur
Introduction to R Software Prof. Shalabh Department of Mathematics and Statistics Indian Institute of Technology, Kanpur Lecture - 03 Command line, Data Editor and R Studio Welcome to the lecture on introduction
More informationDigital Portable Overhead Document Camera LV-1010
Digital Portable Overhead Document Camera LV-1010 Instruction Manual 1 Content I Product Introduction 1.1 Product appearance..3 1.2 Main functions and features of the product.3 1.3 Production specifications.4
More informationDavis Art Images: Create and Share Slideshows
Davis Art Images: Create and Share Slideshows Davis Art Images, you can create and curate custom sets of images to use in your art room with Tags. Your Tagged Image Sets can then be viewed and presented
More informationProduced by Mr B Ward (Head of Geography PGHS)
Getting to Know Google Earth The following diagram describes some of the features available in the main window of Google Earth. 9. Sun - Click this to display sunlight across the landscape. 1. Search panel
More informationWHY TOTAL CONTROL? Key features:
ATC SIMULATION WHY TOTAL CONTROL? Total Control offers the most reliable, configurable and flexible ATC simulation solution in the market. With easily customisable scenarios, your trainees will be better
More informationImage Editing and Measurement Software. User Manual
Digital Viewer II TM Digital Microscope Image Editing and Measurement Software User Manual Version: 2.1.1.2 1 DIGITAL VIEWER II TM DIGITAL MICROSCOPE... 1 IMAGE EDITING AND MEASUREMENT SOFTWARE... 1 USER
More informationPhotoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box.
CROPPING IMAGES In Photoshop CS6 One of the great new features in Photoshop CS6 is the improved and enhanced Crop Tool. If you ve been using earlier versions of Photoshop to crop your photos, you ll find
More information1. Reference Guide and Glossary
1. Reference Guide and Glossary Design Panel New Click the New Icon at any time to create a new project from scratch. Projects Browse, select, and cut projects from the Projects Tab. This includes your
More informationGetting Started in Eagle Professional Schematic Software. Tyler Borysiak Team 9 Manager
Getting Started in Eagle 7.3.0 Professional Schematic Software Tyler Borysiak Team 9 Manager 1 Executive Summary PCBs, or Printed Circuit Boards, are all around us. Almost every single piece of electrical
More informationHOW CAN A GPS HELP? WHY A GPS? HOW DOES A GPS WORK?
HOW CAN A GPS HELP? WHY A GPS? HOW DOES A GPS WORK? WHO INVENTED GPS? About The GPS Satellites There are 24-32 different satellites in space 2005 They orbit the Earth every 12 hours in 6 different planes
More informationPRODIM CT 3.0 MANUAL the complete solution
PRODIM CT 3.0 MANUAL the complete solution We measure it all! General information Copyright All rights reserved. Apart from the legally laid down exceptions, no part of this publication may be reproduced,
More informationPublic Safety Routing Using ArcGIS Online and HERE Data
Public Safety Routing Using ArcGIS Online and HERE Data Knowledge, Skills, and Abilities (KSAs) Supported This training module develops several KSAs that are fundamental to using GIS to support public
More informationUser Manual for Grass Snap (Android Version)
User Manual for Grass Snap (Android Version) Grass Snap is a useful tool when monitoring your pastures and grasslands. Grass Snap will take you through the monitoring process step-by-step. Grass Snap meets
More informationAECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
More informationKodu Game Programming
Kodu Game Programming Have you ever played a game on your computer or gaming console and wondered how the game was actually made? And have you ever played a game and then wondered whether you could make
More informationCS 315 Intro to Human Computer Interaction (HCI)
CS 315 Intro to Human Computer Interaction (HCI) Direct Manipulation Examples Drive a car If you want to turn left, what do you do? What type of feedback do you get? How does this help? Think about turning
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationChapter 12: Electronic Circuit Simulation and Layout Software
Chapter 12: Electronic Circuit Simulation and Layout Software In this chapter, we introduce the use of analog circuit simulation software and circuit layout software. I. Introduction So far we have designed
More informationChapter 1: Introduction
Chapter 1: Introduction When the document camera is connected with the computer/laptop, it automatically goes to the live mode, in which the view captured by the document camera is shown. There is a variety
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationCreating Drop Shadows with Photoshop
Innovate Make Create IMC https://library.albany.edu/imc/ 518 442-3607 Creating Drop Shadows with Photoshop The drop shadow (sometimes called a box shadow ) is an effect often found in catalog photographs,
More information< Then click on this icon on the vertical tool bar that pops up on the left side.
Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts
More informationGYPSY GYPSY. Quick Start Guide. Guide Rapide GET STARTED:
GYPSY Quick Start Guide GYPSY Guide Rapide GET STARTED: Be sure to download the latest updates and claim your Cricut rewards points! Visit www.provocraft.com/gypsy STYLUS PEN ZOOM (IN AND OUT) MENU BUTTON
More informationRecording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson
Recording your Voice Tutorials 2 - Setting the Computer Setting Audacity Wayne B. Dickerson In this tutorial we want to insure that your computer and Audacity will do the best recording job they can do
More informationUser Guide for TWAIN / DirectX interface for GRYPHAX USB 3.0 cameras
User Guide for TWAIN / DirectX interface for GRYPHAX USB 3.0 cameras The TWAIN & DirectX driver for PROGRES GRYPHAX USB 3.0 cameras enables user to operate with TWAIN and DirectX supported 3 rd party software
More informationSettings. ! The Preview Pane !!!!! THE PREVIEW PANE IMAGES & LAYERS PANE SETTINGS PANE SETTINGS WINDOW UNDO/REDO AND RESET
Settings THE PREVIEW PANE IMAGES & LAYERS PANE SETTINGS PANE UNDO/REDO AND RESET SETTINGS WINDOW The Preview Pane When you first load an image, PhotoDonut calculates the preview scale to fit your image
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationRDworks and Basic Rabbit Laser Operation Tutorial
RDworks and Basic Rabbit Laser Operation Tutorial File Setup Layer color is how the Rabbit Software designates different operations so, regardless of design software, you will want to organize geometry
More informationBlopHome Help. How to get started. 1 of 5. If you are not logged in blophome
How to get started New If you are not logged in blophome Open 1 of 5 My site How to get started New If you are logged in blophome Open 1 of 5 My site How to get started 2 of 5 With one click move and modify
More informationVolume of Revolution Investigation
Student Investigation S2 Volume of Revolution Investigation Student Worksheet Name: Setting up your Page In order to take full advantage of Autograph s unique 3D world, we first need to set up our page
More informationPhotoshop Essentials Workshop
Photoshop Essentials Workshop Robert Rector idesign Lab - Fall 2013 What is Photoshop? o Photoshop is a graphics editing program. Despite the name it is used for way more than just photo editing! What
More informationCOURSE UNIT 3. Plan Creation. Messerli EliteCAD Version
Messerli EliteCAD Version 13 27.09.2013 COURSE UNIT 3 Plan Creation Switzerland: Austria: Germany: Messerli Informatik AG Messerli Informatik GmbH Messerli Informatik GmbH Pfadackerstrasse 6 Hamoderstraße
More informationHome Screen to Get You Started
Updated User Interface The user interface has been redesigned for faster learning and more complete designing. Its friendly new look introduces large interface elements, customizable workspace, help tips,
More informationUsing the zoom adjustment, zoom on the gel Adjust the tray on the VGAU 3000 to see the image of the gel in the viewfinder
Operation of Vakili 3000 Gel Analysis Unit Both qualitative and quantitative analysis of electrophoresis experiments can be accomplished by using the Vakili 3000 Gel Analysis Unit. There are three steps
More informationExample Application C H A P T E R 4. Contents
C H A P T E R 4 Example Application This chapter provides an example application of how to perform steady flow water surface profile calculations with HEC-RAS. The user is taken through a step-by-step
More informationCSCI Lab 6. Part I: Simple Image Editing with Paint. Introduction to Personal Computing University of Georgia. Multimedia/Image Processing
CSCI-1100 Introduction to Personal Computing University of Georgia Lab 6 Multimedia/Image Processing Purpose: The purpose of this lab is for you to gain experience performing image processing using some
More informationTotal CAD Drawing Management Tool. Host Drawing Manager. Total DWG Manager. Revision Manager
Total CAD Drawing Management Tool Your New Design Assistant AutoPREP for AutoCAD Host Drawing Manager Total DWG Manager Revision Manager AP Says: FREE YOUR MIND FOR PRODUCTIVE DESIGN! What is? The Ultimate
More informationAnsoft Designer Tutorial ECE 584 October, 2004
Ansoft Designer Tutorial ECE 584 October, 2004 This tutorial will serve as an introduction to the Ansoft Designer Microwave CAD package by stepping through a simple design problem. Please note that there
More informationPhoto One Digital Photo Shoots and Edits
Photo One Digital Photo Shoots and Edits You will submit photo shoots, unedited and you will submit selected edited images. The shoots will be explained first and the edits will be explained later on this
More informationManaging images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
More informationBeginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
More informationUp to Cruising Speed with Autodesk Inventor (Part 1)
11/29/2005-8:00 am - 11:30 am Room:Swan 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Up to Cruising Speed with Autodesk Inventor (Part 1) Neil Munro - C-Cubed Technologies Ltd. and
More informationUse of the LTI Viewer and MUX Block in Simulink
Use of the LTI Viewer and MUX Block in Simulink INTRODUCTION The Input-Output ports in Simulink can be used in a model to access the LTI Viewer. This enables the user to display information about the magnitude
More informationCAMWorks How To Create CNC G-Code for CO2 Dragsters
Objective: In this chapter we will show how to mill out the axle holes for this CO2 Dragster from the left side. VI.1. Open the previously created file: Dragster axle hole 001.sldprt. VI.2. Select the
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationOrganizing artwork on layers
3 Layer Basics Both Adobe Photoshop and Adobe ImageReady let you isolate different parts of an image on layers. Each layer can then be edited as discrete artwork, allowing unlimited flexibility in composing
More informationvstasker 6 A COMPLETE MULTI-PURPOSE SOFTWARE TO SPEED UP YOUR SIMULATION PROJECT, FROM DESIGN TIME TO DEPLOYMENT REAL-TIME SIMULATION TOOLKIT FEATURES
REAL-TIME SIMULATION TOOLKIT A COMPLETE MULTI-PURPOSE SOFTWARE TO SPEED UP YOUR SIMULATION PROJECT, FROM DESIGN TIME TO DEPLOYMENT Diagram based Draw your logic using sequential function charts and let
More informationChordPolyPad Midi Chords Player iphone, ipad Laurent Colson
ChordPolyPad 1 ChordPolyPad Midi Chords Player iphone, ipad Laurent Colson 1. ipad overview... 2 2. iphone overview... 3 3. Preset manager... 4 4. Save preset... 5 5. Midi... 6 6. Midi setup... 7 7. Pads...
More informationHow to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationWelcome to Storyist. The Novel Template This template provides a starting point for a novel manuscript and includes:
Welcome to Storyist Storyist is a powerful writing environment for ipad that lets you create, revise, and review your work wherever inspiration strikes. Creating a New Project When you first launch Storyist,
More informationCreating Journey In AgentCubes
DRAFT 3-D Journey Creating Journey In AgentCubes Student Version No AgentCubes Experience You are a traveler on a journey to find a treasure. You travel on the ground amid walls, chased by one or more
More informationTemplate Drawings. Template Drawings. AutoCAD Essentials
AutoCAD Essentials Starting a new drawing using any CAD software requires a series of steps. Measurement units, sheet size, layer designations, text fonts and text sizes plus many more items must be set.
More informationminicad5 QuickStart Tutorial Stage: 4 Plot the Job
minicad5 QuickStart Tutorial Stage: 4 Plot the Job Aim: Plot the job to both printer / plotter and DXF file. Figure 1 - The finished product Plotting and export to DXF We wish to produce a final paper
More informationUser s handbook Last updated in December 2017
User s handbook Last updated in December 2017 Contents Contents... 2 System info and options... 3 Mindesk VR-CAD interface basics... 4 Controller map... 5 Global functions... 6 Tool palette... 7 VR Design
More informationAECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
More information-f/d-b '') o, q&r{laniels, Advisor. 20rt. lmage Processing of Petrographic and SEM lmages. By James Gonsiewski. The Ohio State University
lmage Processing of Petrographic and SEM lmages Senior Thesis Submitted in partial fulfillment of the requirements for the Bachelor of Science Degree At The Ohio State Universitv By By James Gonsiewski
More informationOrnamental Pro 2004 Instruction Manual (Drawing Basics)
Ornamental Pro 2004 Instruction Manual (Drawing Basics) http://www.ornametalpro.com/support/techsupport.htm Introduction Ornamental Pro has hundreds of functions that you can use to create your drawings.
More informationAdvance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
More informationSpectrum & Power Measurements Using the E6474A Wireless Network Optimization Platform Application Note By Richard Komar
Spectrum & Power Measurements Using the E6474A Wireless Network Optimization Platform Application Note By Richard Komar Contents Introduction...1 Band Clearing...2 Using the spectrum analyzer for band
More informationTable of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationThe original image. Let s get started! The final light rays effect. Photoshop adds a new layer named Layer 1 above the Background layer.
Add Rays Of Light To A Photo In this photo effects tutorial, we ll learn how to quickly and easily add rays of sunlight to an image with Photoshop! I ll be using Photoshop CS5 throughout this tutorial
More informationCircuit Shop v December 2003 Copyright Cherrywood Systems. All rights reserved.
Circuit Shop v2.02 - December 2003 Copyright 1997-2003 Cherrywood Systems. All rights reserved. This manual is a printable version of Circuit Shop's help file. There are two parts to the manual: The first
More informationPHOTOSHOP1 15 / WORKSPACE
MassArt Studio Foundation: Visual Language Digital Media Cookbook, Fall 2013 PHOTOSHOP1 15 / WORKSPACE Imaging software, just like our computers, relies on metaphors from the physical world for their design.
More informationPUZZLE EFFECTS 2D Photoshop actions For Photoshop CC, CS6, CS5, CS4
PUZZLE EFFECTS 2D Photoshop actions For Photoshop CC, CS6, CS5, CS4 User Guide CONTENTS 1. THE BASICS... 1 1.1. About the actions... 1 1.2. How the actions are organized... 1 1.3. The Classic effects (examples)...
More informationObjects in Alice: Positioning and. Moving Them July 2008
Objects in Alice: Positioning and By Jenna Hayes under the direction of Professor Susan Rodger Duke University July 2008 Moving Them July 2008 www.cs.duke.edu/csed/alice/aliceinschools Download the Alice
More informationCETOL 6σ Tutorial. For Pro/Engineer and Creo Parametric. The table. CETOL 6σ / ProE. Page 1
CETOL 6σ Tutorial For Pro/Engineer and Creo Parametric The table Page 1 The Table Description: This tutorial will show you the basic functionality of CETOL 6 Sigma. An analysis normally starts with a definition
More informationAndroid. Tips & Tricks
Android Tips & Tricks Contents What s New 3 Tips Before You Begin 4 Getting Started 5 Create a canvas 5 Navigating 5 Hide the UI 5 Color 6 Customize the color palette 6 Selecting a color 6 Capturing a
More informationIntroduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor. 1 Introduction. For Quartus II 13.1
Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor For Quartus II 13.1 1 Introduction This tutorial provides an introduction to simulation of logic circuits using the
More informationADOBE PHOTOSHOP CS 3 QUICK REFERENCE
ADOBE PHOTOSHOP CS 3 QUICK REFERENCE INTRODUCTION Adobe PhotoShop CS 3 is a powerful software environment for editing, manipulating and creating images and other graphics. This reference guide provides
More informationGoogle Earth Workshop Version 5
Google Earth Workshop Version 5 From the Mitchell Home Page (http://mitchell.needham.k12.ma.us) Technology > For Teachers > Prof Dev > Google Earth Getting to Know Google Earth Taken from Google Earth
More informationPlease feel free to contact with any questions.
Wouldn t you rather have a yearbook that has the year YOU remember? Imagine having the ability to put in your photos and memories in the yearbook. No one will have the same yearbook as you and that s the
More informationDigital Photography 1
Digital Photography 1 Photoshop Lesson 1 Photoshop Workspace & Layers Name Date Default Photoshop workspace A. Document window B. Dock of panels collapsed to icons C. Panel title bar D. Menu bar E. Options
More informationMeteor Game for Multimedia Fusion 1.5
Meteor Game for Multimedia Fusion 1.5 Badly written by Jeff Vance jvance@clickteam.com For Multimedia Fusion 1.5 demo version Based off the class How to make video games. I taught at University Park Community
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationThe Revolve Feature and Assembly Modeling
The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling
More informationDC300. Document Camera USER MANUAL
DC300 Document Camera USER MANUAL 1 Please read this manual carefully before operating the document camera and keep it for reference. PRECAUTIONS NOTICE: PLEASE READ CAREFULLY BEFORE USE Use the document
More informationILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc.
ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. WELCOME TO THE ILLUSTRATOR TUTORIAL FOR SCULPTURE DUMMIES! This tutorial sets you up for
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationOptimizing Digital Drawing Files and BIM Models for Measurement and Estimating
Optimizing Digital Drawing Files and BIM Models for Measurement and Estimating Simon Lovegrove MRICS, AAIQS - Exactal CM4228 Drawing file formats issued for measurement and estimating purposes range from
More informationSahli GIMP Tutorials
Sahli GIMP Tutorials The Gimp is a free photo editing program similar to Photoshop but not. It has many of the same tools at a fraction of the cost. Photoshop is a great program for professional designers
More informationSilhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6
user s manual Table of Contents Introduction... 3 Sending Designs to Silhouette Connect... 3 Sending a Design to Silhouette Connect from Adobe Illustrator... 3 Sending a Design to Silhouette Connect from
More informationTECHNOLOGY COMMONALITY FOR SIMULATION TRAINING OF AIR COMBAT OFFICERS AND NAVAL HELICOPTER CONTROL OFFICERS
TECHNOLOGY COMMONALITY FOR SIMULATION TRAINING OF AIR COMBAT OFFICERS AND NAVAL HELICOPTER CONTROL OFFICERS Peter Freed Managing Director, Cirrus Real Time Processing Systems Pty Ltd ( Cirrus ). Email:
More informationThe SoundPLAN Expert System for Industry Noise
The SoundPLAN Expert System for Industry Noise Differences in approach between the optimization of transportation noise and industry noise In contrast to transportation noise where noise barriers are the
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationNow, we need to talk about the Juxtaposer menu and the tools you have at your disposal. 1. The Layers button looks like two squares
Apps taught in the class: Diptic ($1) Juxtaposer ($3) Mextures ($2) RePix (Free) LensLight/AlienSky ($3 ea) FlowPaper ($1) Additional tools: Stylus PT 1: Creating a canvas with Diptic 1. Open the Diptic
More informationRevit Revit A step by step guide. 11/14/2011 jimmy boone
Revit 2012 Revit A step by step guide 11/14/2011 jimmy boone Contents Environment settings... 4 Setting up a new MEP models... 5 Step 1, beginning from an architectural model... 5 Step 2 (if using a separate
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationUsing LTSPICE to Analyze Circuits
Using LTSPICE to Analyze Circuits Overview: LTSPICE is circuit simulation software that automatically constructs circuit equations using circuit element models (built in or downloadable). In its modern
More informationFine HVAC Quick Start Guide
Fine HVAC Quick Start Guide 1. Installation Launching 2. CAD Environment 3. Calculation Environment Preface This Quick Start Guide provides a fast and friendly introduction on Fine HVAC main features
More informationSkyView. Autopilot In-Flight Tuning Guide. This product is not approved for installation in type certificated aircraft
SkyView Autopilot In-Flight Tuning Guide This product is not approved for installation in type certificated aircraft Document 102064-000, Revision B For use with firmware version 10.0 March, 2014 Copyright
More informationStratigraphy Modeling Boreholes and Cross Sections
GMS TUTORIALS Stratigraphy Modeling Boreholes and Cross Sections The Borehole module of GMS can be used to visualize boreholes created from drilling logs. Also three-dimensional cross sections between
More informationOverview. Copyright Remcom Inc. All rights reserved.
Overview Remcom: Who We Are EM market leader, with innovative simulation and wireless propagation tools since 1994 Broad business base Span Commercial and Government contracting International presence:
More informationLab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
More information22B / NONDESTRUCTIVE EDITING - QUICK MASKS 1
22B / NONDESTRUCTIVE EDITING - QUICK MASKS 1 The following sections will deal with photoshop more as an artists studio and not just as an extension of photography. You will work more with layers and using
More informationPortrait Professional User Manual
Portrait Professional User Manual Version 9 Anthropics Technology Ltd www.portraitprofessional.com Contents 3 Table of Contents Part I Getting Started 6 1 Quick Start... Guide 6 2 Top Tips... For Best
More information