Modern pliers Ancient tradition MADE IN SWEDEN

Transcription

1 Modern pliers ncient tradition M IN SWN

2 TH PROUTION ON MTRIL ON MNUTURIN MTHO ll LRSON quality cutters and pliers are made of Swedish steel. ll LRSON quality cutters and pliers are forged. There are many ways to manufactue the blanks for a tool, for instance, stamping, extrusion, machining, forging. The method chosen by LRSON is forging. forged cutter or plier is stronger as the grain follows the profile of the tool. TWO HRNIN MTHOS ll LRSON quality cutters and pliers are fully hardened and have through hardened shanks and heads. In addition the cutting edges of all LRSON quality cutters are induction hardened. THR UTS The manufacturing process is automated but each individual cutter and plier is tested by hand before it is approved for delivery. uts at three different positions along the cutting edges verify the perfect function of all LRSON quality cutters. 5 IV ISO STNRS LRSON quality cutters and pliers for electronics conform to these standards: ISO 54 Single-purpose nippers - utting nippers. ISO 55 Single-purpose nippers - Pliers for gripping and manipulating. ISO 5 Test methods. ISO 57 eneral technical requirements. ISO 7 Nomenclature ON MILLION UTS The quality of all LRSON cutters and pliers is confirmed in test machines running continuously. Joints, return springs and cutting edges are tested. ach cutter is capable of one million cuts without showing any signs of damage or wear.

3 TH PROUTS THR UTTIN S ll LRSON cutters comply with the terminology of the ISO standard. epending on the taper of the cutting edge the cut lead-ends differ. Standard bevelled cutting edges. The standard bevel cutters of the 000 series have a green dot. Light chamfered external cutting edge bevels (semi-flush cutting). The semi-flush cutters of the 000 series have a yellow dot. Without external cutting edge bevels (flush cutting). The flush cutters of the 000 series have a red dot. THR HNLS s a standard all LRSON quality cutters and pliers have black conductive handles (> x0 ohm and< x0 ohm) for use in work areas protected against electrostatic discharge (P). ll LRSON quality cutters and pliers can be equipped with blue dissipative handles (> x0 ohm and < x0 ohm). very LRSON quality cutter and plier can also be supplied with yellow handles for use where electrostatic discharges are not a problem. These tools are S-approved according to I TH IONL UTTRS HV THR SHPS O JWS Rounded jaws are the most coon shape and make the strongest cutter. Pointed jaws increase the access to areas of limited clearance. Pointed and relieved jaws further increase the access to tight areas. LRSON TWO TYPS O JOINTS cutters and pliers of the 000 series have precision screw joints. They can be adjusted and the cutting edges can always keep their correct alignment. LRSON cutters and pliers of the 000 series have a box joint with rivet, which ensures the precise alignment especially important for long nose pliers.

4 4 000 series LRSON cutters of the 000 series are diagonal cutters and have precision screw joints. They can be adjusted and the cutting edges can always keep their correct alignment. ll LRSON quality cutters and pliers are available with three different handles. onductive handles. dd 0 to the product issipative handles. dd 0 to the product Yellow handles. dd 05 to the product IONL UTTRS Standard bevel Semi-flush lush The cutters of the 000 series are colour d for easy identification of the cutting edges. opper Spring Iron Piano ROUN JWS S 50 S S ,5,5,5,5, ,,,,,,,,, 0,5 0,5 0,-,5 0,-,5 0,-,0 0,-, 0,-, 0,-, 0,-, 0,-,5 -,0 0,-,0 0,-,0 0,-, 0, POINT JWS ,5,5,5,,, 0,-,5 0,-,5 0,-,0 0,-, 0,-, 0,-,5 POINT, RLIV JWS ,5,5,5,0,0, 0,-,0 0,-,0 0,- 0,-,5 0,-,5 0,-,0 STRIPPIN TOOLS S ll cutters can be provided with a stripping gap S and 50 also with a stripping device S 4 and. S The stripping tool SMO Stripping width 5 Stripping gaps 0, - 0,

5 000 series LRSON cutters of the 000 series have a box joint with rivet. 5 UTTRS Standard bevel Semi-flush opper IONL UTTR POINT JWS ,5,5 0,5-,5 0,5-,5 IONL UTTR POINT, RLIV 05 JWS 07,5 0,5 -,0 NL IONL UTTR angle ,5,5 5 o 45 o 0,5-,0 0,5-,0 N UTTR 0 04,5 5 0,5 -,0 NL N UTTR angle ,5,5 5 5 o o 0,5-,0 0,5-,5 NL N UTTR RLIV JWS 04 05,5 angle o 0,5-,0

6 000 series LRSON pliers of the 000 series have a box joint with rivet, which ensures the precise alignment especially important for long nose pliers. ll LRSON quality cutters and pliers are available with three different handles. onductive handles. dd 0 to the product issipative handles. dd 0 to the product Yellow handles. dd 05 to the product The holding pliers are available with smooth or serrated jaws. Smooth HOLIN PLIRS Serrated LT NOS 0 0,5,, SNIP NOS ,5,5,, SNIP NOS, LON 0 04,5,5,, SNIP NOS, NT TIP 0 o 0 5,5, ROUN NOS 04 0,5 0,5

7 7 TH URNTS ON URNT orrectly used LRSON quality cutters and pliers never break. Report defects in workmanship and materials and you will get a new tool. LRSON Tools i skilstuna Kungsvägen 4 4 len Sweden Phone ax mail info@larsontools.se

8 This rock carving near skilstuna was made more than one thousand years ago. mong other things it shows a smithy and among the tools depicted you can see a pair of pliers. The tradition goes on... The manufacture of pliers in skilstuna goes back to ancient times. The roots of LRSON Tools can be traced back more than 50 years. The present company was founded in 47. rom the start the objective was clear - to develop and manufacture quality cutters and pliers. Today the production is entirely focused on the most difficult applications - quality cutters and pliers for electronics, telecounication and precision mechanics.