minireceiver 2.0, Click Domes & Click Moulds maintenance and care. Life sounds brilliant.
|
|
- Melvyn Evans
- 6 years ago
- Views:
Transcription
1 minireceiver 2.0, Click Domes & Click Moulds maintenance and care. Life sounds brilliant.
2 2
3 minireceiver 2.0, Click Domes & Click Moulds maintenance and care. minireceiver 2.0 exchanging is as easy as 1, 2, 3 The minireceiver 2.0 is easily exchangeable. To replace the minireceiver, use the exchange tool to open and close the locking bar for reliable securing and no risk of dislodgement. Easy 3-step process Open the locking bar. Remove / Insert the minireceiver. Close the locking bar. How to remove and replace the Click Dome Replacing Click Domes is simple: The Click Dome packaging is designed to help you easily remove used domes. Once the used dome is removed, simply press the tip of the minireceiver unit into the new Click Dome until it clicks in. Remove single domes Connect single domes The Click Dome packaging is designed with a slot for removal of the single dome. Slide the minireceiver into the slot and gently remove the used Click Dome. Press the tip of the minireceiver unit into the Click Dome. The minireceiver clicks in and you are ready! If the wax guard becomes clogged: Use the wax guard exchange tool to replace the used filter. More details below. Click Dome removal tool 1. Gently push removal tool onto Click Dome and grip between finger and thumb. 2. With firm grip on Click Dome, lever removal tool downwards to remove Click Dome, whilst holding minireceiver steady in the other hand. 3
4 Effective 2-step wax protection (wax guard) New! minireceiver with wax guard Dome grid integrated into the Click Domes With the new soft wax grid, cleaning the dome has become even easier: simply squeeze the tip of the dome to break up the wax. Additional protection minireceiver Wax Guard minireceiver Wax Guard Pack of GHD2743 Click Domes have an effective 2 step wax protection system. Click Domes contain an integrated grid to help prevent wax from entering the minireceiver. For additional protection, minireceivers are also installed with a replaceable wax filter. The minireceiver Wax Guard can be replaced by audiologists or wearers using the following the instructions. 1. Remove Click Dome (as illustrated on page 2) Wax Guard 2. Using the end of the blue wax guard removal tool, push and screw clock-wise onto wax guard located on the end of the minireceiver. Pull out old wax guard. 3. Replace new wax guard which is pre-loaded on the end of the minireceiver wax guard removal tool. Simply push new wax guard on to the end of the minireceiver with the side of the tool, which will insert new wax guard. Discard tool and old wax guard. 4
5 Click Mould Instructions Please note that Click Moulds are not compatible with 1st generation receivers. Durable click interface with Click Mould. Effective 2-step wax protection. minireceiver with wax guard. Grid integrated into the Click Moulds. Click Mould* Click Moulds also have a 2 step wax protection system. Each Click Mould has a replaceable HF4 filter (gauze wax trap) which prevents wax entering the Click Mould and minireceiver. In addition, minireceivers are also installed with a replaceable wax filter. Please see instructions on the previous page for replacing the minireceiver Wax Guard. For cleaning instructions please follow a regime as described for Click Domes. Using the blue HF4 removal tool (non screw end), remove new HF4 filter from dial pack. Push new HF4 filter into Click Mould. Remove old HF4 filter with tool provided (included in HF4 dial pack). Unscrew, remove and discard old HF4 filter. click Re-attach Click Mould to minireceiver. Hold minireceiver in the black tool. Please note that the black tool pulls apart to be used as a minireceiver holder. Using click mechanism, securely fit Click Mould onto minireceiver. How to remove and replace the Click Mould and the HF4 Filter Remove minireceiver using black tool. Push through Click Mould using tool (supplied with each Click Mould order) to remove minireceiver. 5
6 Dome Types Open domes 4 mm 8 mm 10 mm Closed mould (short) Semi-Open dome 8 12 mm Closed domes 6 mm 8 mm 10 mm Closed mould (long) Double domes 8/10 mm 10/12 mm Open mould (short) Open mould (long) Custom shell (HP only) 6
7 7
8 The information in this document contains general descriptions of the technical options available, which do not always have to be present in individual cases and are subject to change without prior notice. The required features should therefore be specified in each individual case at the time of conclusion of the respective contract. United Kingdom Siemens Hearing Instruments Platinum House Sussex Manor Business Park Gatwick Road Crawley RH10 9NH Phone: Global Business Unit Siemens Audiologische Technik GmbH Gebbertstrasse 125 DE Erlangen Germany Phone: Global Siemens Headquarters Siemens AG Wittelsbacherplatz Muenchen Germany Global Siemens Healthcare Headquarters Siemens AG Healthcare Sector Henkestrasse Erlangen Germany Phone: Legal Manufacturer Siemens Audiologische Technik GmbH Gebbertstrasse Erlangen, Germany Phone Siemens AG JN6870 Printed in the UK January
INSTRUCTIONS FOR CLEANING YOUR EAR MOULD.
INSTRUCTIONS FOR CLEANING YOUR EAR MOULD. The ear mould of your hearing aid should be cleaned weekly. 1. Detach the ear mould from the hearing aid, as shown in diagram A, pull the tubing away from the
More informationTechnical Data Pure Carat 701 XCL
Technical Data Pure Carat 701 XCL S-Receiver (4 db) Description Very small Receiver-in Canal (RIC) hearing system appropriate for up to severe hearing losses Highly flexible 1 channel digital signal processing
More informationMove System Swivel Caster Installation ( )
Move System Swivel Caster Installation (002-10265-00) Caution Always disconnect power to chair before removing covers or performing any service procedures. Step 1: Remove Top Cover A) Position chair to
More informationOperating & Maintenance Instructions 25 Injection Moulding Machine
Operating & Maintenance Instructions 25 Injection Moulding Machine Table of Contents 1. Health and Safety Information... 2 2. Upon Receipt... 2 3a. Temperature Controller Settings (Brainchild Controller)...
More informationLuminos RF Classic. Where value meets performance.
Luminos RF Classic Where value meets performance www.siemens.com/healthcare What s good value in fluoroscopy? That s easy. Luminos RF Classic. 2 Whether for its handling convenience, outstanding image
More informationAudiological bulletin no. 50
Audiological bulletin no. 50 Customising receiver ear-sets for Passion hearing aids and removing the battery drawer to connect programming cables News from Audiological Research and Communication 9 502
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationOperating & Maintenance Instructions 280 Hot Wire Sculptor
Operating & Maintenance Instructions 280 Hot Wire Sculptor Table of Contents Assembly & Operation... 2 Electrical Supply and Connection... 8 Technical Specification... 8 Fault Finding... 8 Connection Diagram...
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63819-0200 FEATURES Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision user-friendly
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8100 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationSTEVE TADD WOODWIND REPAIRS (.co.uk)
STEVE TADD WOODWIND REPAIRS (.co.uk) 07734 543011 Warming up the Clarinet (Jun 2017) Before fully assembling the clarinet it is best to warm up the instrument (do not warm the instrument by blowing into
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63811-8200 FEATURES TYPE 4D A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0100 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationHAND CRIMP TOOL. Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63819-2300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63819-0000 FEATURES TYPE 4D Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision
More informationProctor Silex 2-Slice Extra Wide Slot Toaster Teardown
Proctor Silex 2-Slice Extra Wide Slot Toaster Teardown Taking apart the Proctor Silex 2-Slice Toaster is order to access it's circuit board for maintenance. Written By: Cory ifixit CC BY-NC-SA www.ifixit.com
More information10ft. Square Side Mount Item # 64443
10ft. Square Side Mount Item # 64443 A S S E M B L Y A N D O P E R A T I O N Thank you for your purchase of Frontgate s 10 Square Side Mount umbrella. Please remove all contents from the package, inspect
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63819-4400 FEATURES TYPE 4D A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationRCY21153W Manual Crimp Hand Tool For Minitek Contacts AWG User s Manual
RCY21153W Manual Crimp Hand Tool For Minitek Contacts AWG 22-24 User s Manual Revision : 01 Date : April, 2010 www.foehrenbach.be 1. Purpose Crimping of Minitek AWG 22-24 contacts onto dedicated stranded
More informationHigh Rise Sit-Stand Desk Converter
High Rise Sit-Stand Desk Converter Assembly Instructions for Model DC350 Patent No. 9,332,839 PRE-ASSEMBLY Please read all instructions before beginning assembly. We strongly recommend you watch the video
More informationJVice Care and Maintenance Thanks for purchasing a Jvice. If properly looked after your Jvice will give a lifetime of tying pleasure.
JVice Care and Maintenance Thanks for purchasing a Jvice. If properly looked after your Jvice will give a lifetime of tying pleasure. Although it is manufactured from highest quality materials any metal
More informationSpecifications: Hole Sizes: Selector Pin Hole: 3/8 (0.375 ) Trigger Pin Hole: 5/32 (0.156 ) Hammer Pin Holes: 5/32 (0.156 )
80% Arms AR-15 Jig manual Thank you for purchasing our AR- 15 jig. This precision self- aligning jig will allow you to finish your 80% Arms and other 80% lowers using only a drill press and a few common
More informationHAND CRIMP TOOL Specification Sheet Order No
HAND CRIMP TOOL Specification Sheet Order No. 63819-1200 FEATURES TYPE 4D Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision
More informationThe Useless Machine. DIY Soldering Edition. Instruction Guide v0004
The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering
More information2. Connect driver to power source leads. After connections are made, place driver above ceiling. SEE MINIMUM SPACE REQUIREMENTS BELOW.
INSTALLATION INSTRUCTIONS INSTALLATION: 1. Cut proper opening in ceiling. Round: 140mm Ø, Square: 140mm x 140mm 140mm Ø 140mm x 140mm 2. Connect driver to power source leads. After connections are made,
More informationOUTLOK Portable Dance Floor laying instructions *Pictures show Florlok but instructions written for Outlok
*Pictures show Florlok but instructions written for Outlok The OUTLOK portable dance floor consists of FULL and HALF panels which are set up in a brickwork fashion which in turn gives the floor its strength
More informationFour-Thread Safety Stitch
Four-Thread Safety Stitch Four-Thread Safety Stitch This stitch is an alternative to the Five-Thread Safety Stitch. It offers the same type of Two-Thread Chainstitch. However the Three-Thread Overlock
More informationAssembly Instructions Please keep for future reference Inspire 40
Assembly Instructions Please keep for future reference Inspire 40 Version 3 : 28/07/2014 Important - Please read these instructions fully before starting assembly ALR2902 Safety and Care Advice Important
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More informationJD-12. Instruction & Parts Manual
JD-12 Instruction & Parts Manual Framon Manufacturing Company, Inc. 909 W Washington Avenue Alpena, MI 49707 Phone: 989-354-5623 Fax: 989-354-4238 E-mail: support@framon.com Website: www.framon.com The
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63811-8700 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0300 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationOperators Manual (Manual A)
CD201 SINGLE COLUMN CARD DISPENSER Operators Manual (Manual A) Contents A1 Scope... 1 A2 Specifications... 1 A3 Installation... 2 3.1 Unpacking and inspection... 2 3.2 Opening and closing the door... 2
More informationApplication Tooling Specification Sheet
Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationKontax Stirling Engines KS90R instructions
Kontax Stirling Engines KS90R instructions This document covers the following: Tools required Parts list Assembly instructions Operating instructions Maintenance Contact details: www.stirlingengine.co.uk
More informationHop-Stopper Wrangler JK Hood Retainer installation
Hop-Stopper Wrangler JK Hood Retainer installation Off Road Only ph 651.644.2323 www.offroadonly.com oro-info@offroadonly.com The ORO Hop-Stopper is a secondary latch mechanism, designed to retain the
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-1700 A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationCover Stitch Wide. Cover Stitch Looper Thread. Cover Stitch Wide page 1
Cover Stitch Wide Cover Stitch Wide This professional Cover Hem stitch is a necessary requirement for today s sewing. The stitch is often seen in ready-to-wear garments. Two needles create parallel rows
More informationV-Groover SIMPLEX INSTRUCTION AND OPERATION MANUAL M O DEL 703. For best results use only authentic Logan blades.
www.logangraphic.com SIMPLEX M O DEL 703 INSTRUCTION AND OPERATION MANUAL For best results use only authentic Logan blades CAUTION: BLADES EXTREMELY SHARP Use replacement blades #1258 Logan Graphic Products,
More informationOrder Number
Order Number 200218-5900 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationTI-84 Plus Silver Edition Individual Key Replacement
TI-84 Plus Silver Edition Individual Key Replacement This guide will show you how to replace an individual key on your TI-84 Plus Silver Edition. Written By: Kale McKinney ifixit CC BY-NC-SA www.ifixit.com
More informationINTERTON RIE Custom Insert. Global Technical Operations gto.gnresound.com Lautrupbjerg 9 DK-2750 Ballerup Denmark
INTERTON RIE Custom Insert Global Technical Operations gto.gnresound.com Lautrupbjerg 9 DK-2750 Ballerup Denmark E-Mail: Service@gnresound.com Table of contents MPG Quick tips...3 Materials / Tools needed
More informationYsio Max. The most direct way to the image. Answers for life.
Ysio Max The most direct way to the image www.siemens.com/ysio-max Answers for life. 2 It s more. It s MAX. MAX Multiple Advances in X-ray It s more than just single features or functions. MAX offers multiple
More informationOTECO INC. MODEL ,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL
Page 1 of 7 OTECO INC. MODEL 45 4 5,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL Page 2 of 7 TABLE OF CONTENTS 1. Assembly Blowout 2. Repair Kit Contents & Technical Specifications 3. Disassembly
More informationNikon Coolpix E5700 Top Cover Replacement
Nikon Coolpix E5700 Top Cover Replacement Removing the top cover of the camera. Written By: Kyle Sitton ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide will walk you through the
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-1000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationSolid Sample Holder Accessory
Installation category I Pollution degree 2 Equipment class III Introduction The Solid Sample Holder for the Agilent Cary Eclipse is an accessory that enables you to perform fluorescence measurements on
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationHigh Rise Sit-Stand Desk Converter
High Rise Sit-Stand Desk Converter Assembly Instructions for Model DC300 Patent Pending PRE-ASSEMBLY Please read all instructions before beginning assembly. We strongly recommend you watch the video at
More informationApplication Tooling Specification
Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationApplication Tooling Specification Sheet
Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-7500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationUpgrading the 5-GHz Radio Module
CHAPTER 5 This chapter provides instructions for upgrading a 5-GHz radio module and includes the following sections: Upgrade Overview, page 5-2 Removing the 5-GHz Radio Access Cover, page 5-2 Removing
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-5500 FEATURES TYPE 4C Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision
More informationOrder Number
Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationHand Crimp Tool Specification Sheet Order No Replaces (HTR1031E) And (HTR1031E1)
Hand Crimp Tool Specification Sheet Order No. 63811-3200 Replaces 11-01-0084 (HTR1031E) And 11-01-0211 (HTR1031E1) TYPE 2C FEATURES Œ Œ Œ Œ A full cycle ratcheting hand tool ensures complete crimps Ergonomic
More informationCS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT Phone: Toll-free:
CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free: 800-700-5919 Email: info@csunitec.com CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free:
More informationApplication Tooling Specification
Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More information16 STEEL CABINET HEAVY DUTY
HEAVY DUTY 16 STEEL CABINET ASSEMBLY INSTRUCTIONS SIX DRAWER BASE CABINET 12-2013 Parts List Part No Description Qty Image SIX DRAWER BASE CABINET Part No Description Qty Image SB-1 Cabinet Body 1 SLD-01
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More informationTABLE OF CONTENTS LIMITATIONS OF WARRANTY CONT. QUALITY
THANK YOU Congratulations on your recent purchase! We at Stryker know that you have a choice when it comes to your archery equipment, and we want to thank you for choosing us as your hunting partner. Your
More informationUser Manual. Digital Compound Binocular LED Microscope. MicroscopeNet.com
User Manual Digital Compound Binocular LED Microscope Model MD82ES10 MicroscopeNet.com Table of Contents i. Caution... 1 ii. Care and Maintenance... 2 1. Components Illustration... 3 2. Installation...
More informationDFG TitanWire Heavy Duty Binding Machine
DFG TitanWire Heavy Duty Binding Machine Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com TitanWire - Heavy Duty Wire Punch and Binding Machine Full Die Disengagement
More informationDiiVA DIY Field Termination User Manual For terminating Cat6 cables with DiiVA connectors
DiiVA DIY Field Termination User Manual For terminating Cat6 cables with DiiVA connectors Thank you for purchasing the Luxi Electronics patent pending DiiVA DIY (Do It Yourself) field termination products.
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-1500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification
Order No. 63828-2000 Application Tooling Specification Type 4G FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles
More informationMAT MASTER TM SYSTEMS
FrameCo MAT MASTER TM SYSTEMS #14225 BEVEL MOUNT CUTTERS Welcome and thank you for purchasing a FrameCo Mat Master System. Through these instructions we will endeavour to show you the benefits of the system
More informationINSTALLATION INSTRUCTION Silo Multiples - New Construction Housing MT-4*15, MT-4*10
IMPORTANT SAFETY INSTRUCTIONS 1. Read all instructions before installing. 2. System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
More informationSCITEX Dual Roll Kit. User s guide
SCITEX Dual Roll Kit User s guide 2011 Hewlett-Packard Development Company, L.P. First edition Legal notices The information contained herein is subject to change without notice. The only warranties for
More informationTOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR FORD FLARESIDE TRUCKS
TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR 53-87 FORD FLARESIDE TRUCKS Vise Grip Clamps C-clamps Sharpie Marker Ball Peen Hammer Center Punch 3/8 or 1/2 Drill 5/32, 7/32, 9/32, and 3/8 Drill Bits
More informationApplication Tooling Specification
Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationUNDERPINNERS CS 88 & CS 89 FOOT-OPERATED PNEUMATIC. Technical and User Manual. Version 1 au 12 / 01. Cassese / Communication
UNDERPINNERS CS 88 & CS 89 FOOT-OPERATED PNEUMATIC Technical and User Manual Version 1 au 12 / 01 Cassese / Communication CS88 / CS 89 - Technical and User Manual CONTENTS PAGE N INTRODUCTION ACCESSORIES
More informationKontax Stirling Engines KS90S instructions
Kontax Stirling Engines KS90S instructions This document covers the following: Tools required Parts list Assembly instructions Operating instructions Maintenance Contact details: www.stirlingengine.co.uk
More informationAssembly. Insert stem and then fix/lock using the grub screw as in picture.
Assembly Parts list: (Boxed set) Body inc hinge plate x1 M33 x 3.5 16 tpi + depth stop collar x1 1 stem + collar x1 HSS cutter x1 Bristol handle x1 Twist handle x1 4mm Allen key x1 3mm Allen key x 1 Instruction
More informationSabre Series 2 Inspired Design Precision Engineering
Sabre Series 2 Inspired Design Precision Engineering USER INSTRUCTIONS Thank you for choosing the Keencut Sabre Series 2. Every effort has been made to bring you a precision engineered product with the
More informationVolvo 240/260 New Face Overlay Installation Models By Dave Barton
Volvo 240/260 New Face Overlay Installation 1975-80 Models By Dave Barton These custom faces are the product of years of research and experimentation. They are printed with a special printer using waterproof
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-7200 FEATURES TYPE 4C Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision
More informationINSTALLATION INSTRUCTIONS
TOOLS REQUIRED: Level Square Phillips Screw Driver Slot Screw Driver Pliers Clamp PARTS PROVIDED: Frame Installations Screws. 4 per door. (#8 x 1-3/4 ) Sex Bolt. 4 per frame joint. Torque Lever 2 Shelf
More informationFan, Eden/Northfield, GS Installation Instructions (SKU ) Packing List
Packing List Blower Assembly Wiring Harness Rheostat with Nut and Knob Snap Disc Mounting Hardware (4) rubber grommets with brass inserts, (4) nuts, (4) washers. Cover Assembly Installation Warning: Make
More informationJ. Base 1 pc. 1 pc. P. Shelf 2 pcs. Gate Leg. 1 pc. Head Cap Bolt 13 pcs. (+1 extra) Cam Lock Screw. Cam Lock. 20 pcs. (+1 extra)
88 5023 95C Kitchen Island with Breakfast Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63811-5970 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63811-5900 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationAAG CloudWatcher Update Humidity sensor (*)
AAG CloudWatcher Update Humidity sensor (*) (*) For AAG CloudWatcher units SN 400 onwards. For a better understanding of these instructions we have divided them into two sections: to units with serial
More informationThe Convex or Half-Round surfaces of SR-1 and SR-2
Sole and Bar Rasp Directions 7-17-13 p.1 How to Use Evolutionary Hoof Care s New Contouring Bar & Sole Rasps TM The SR-1 Rasp Tooth (white handle) and SR-2 Knife Tooth (black handle) See video at: www.evohoofcare.com
More informationBath Accessory Installation
Bath Accessory Installation Step 1 - Clean surface using a clean dry cloth or use rubbing alcohol to remove any residue (wax, grease, solvents). Allow to dry one hour. Caution! DO NOT use any household
More informationMotorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented
More informationJavelin Integra Inspired Design Precision Engineering
Javelin Integra Inspired Design Precision Engineering USER INSTRUCTIONS Thank you for choosing the Keencut Javelin Integra. Every effort has been made to bring you a precision engineered product with the
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-6500 TYPE 2C FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationHand Crimp Tool Specification Sheet Order No
Hand Crimp Tool Specification Sheet Order No. 63811-7400 FEATURES Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision user-friendly
More informationWOLF PUP LOOM TM & WOLF PUP LT LOOM TM
WOLF PUP LOOM TM & WOLF PUP LT LOOM TM Assembly Instructions FL3000 FL3006 FL3009 WOLF PUP WOLF PUP LT Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212
More informationIntroduction. Note: For best results, vegetables should be pre-cut into manageable chunks in order to properly fit within the safety holder.
Introduction Your MIU France Stainless Steel Mandoline features 2 width of julienne blades, built in waffle blade and a variable thickness adjustments which make it one of the most versatile kitchen tools
More informationConstable Oak Extension Dining Table
Constable Oak Extension Dining Table Assembly Instructions - Please keep for future reference 176/0325 Dimensions Width - 160/ 200cm Depth - 90cm Height - 75cm Important - Please read these instructions
More informationCFC Series Cable Replacement Kit. for CFP Series Carbon Fiber Boom Poles. Owner s Manual
CFC Series Cable Replacement Kit for CFP Series Carbon Fiber Boom Poles Owner s Manual TA (mini XLR) connector Right-angle XLR connector Nylon line Coiled XLR cable. mm hex key Tip strain relief Introduction
More information