Laserable and Rotary. Materials Catalogue. Trotec offers a wide variety of materials to choose from providing unlimited potential for your business.

Transcription

1 Laserable and Rotary Materials Catalogue Trotec offers a wide variety of s to choose from providing unlimited potential for your business.

2 TroLase Laserable Materials TroLase is an UV-resistant acrylic based laminate for both indoor and outdoor applications. The thin top layer makes detailed engraving possible at high production speeds. Processing creates less residue than with other s, which reduces the need for cleaning and minimizes processing times. Typical Use Signs Exterior Signs Badges Trophy Plates Safety Signs Material features Material: Micro-surfaced impact acrylic, 2 ply / 3 ply Finish: matte non-glare, gloss Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: laser, saw, shear** Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Exterior Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs. Best Sellers White/Red White/Black 1/32 L White/Sky Blue 1/32 L L L L L L L G Red/White 1/32 L L L L G Yellow/Black 1/32 L L L L G Blue/White Black/White 1/32 L /32 L L L L L L G L G Bright Green/White L G 1/32 L Smoke Grey/White L L L **Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications. Note: A G at the end of each code means Gloss 4 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

3 TroLase Burgundy/White Sapphire/White Light Blue/White L /32 L L L Orange/White 1/32 L L Navy Blue/White L Almond/Black L Laserable Materials Yellow/Red L Purple/White L L G Matte Black/Silver L Celadon Green/White L Pink/White L Gloss Black/White L Evergreen/White 1/32 L L L Dark Brown/White L Matte Black/Gold L White/Black/ White L L Walnut/White L Gloss Black/Gold L Black/White/ Black L L Dark Walnut/White L Navy Blue/Gold L Blue/White/ Blue L L Red/Black L Red/Gold L Red/White/ Red L L Pink/Black L Pine Green/Gold 1/2 L Yellow/Black/ Yellow L L Pine Green/White 1/32 L L L Verde Green/Gold L Medium Brown/White L Bright Green/White 1/32 L L L L G Light Grey/White L

4 Laserable Materials TroLase Metallic, Plus and Scratch Resistant (SR) TroLase Metallic is an acrylic based laminate with an authentic metallic finish. The thin surface layer allows detailed engraving at high production speeds. TroLase Metallic Plus features a special surface coating that makes the UV-resistant and suitable for outdoor. The SR s include a clear top coat which adds protection against scratches, scuffing and fingerprints. Typical Use Signs Exterior Signs (Metallic Plus) Badges Trophy Plates Safety Signs TroLase Metallic Plus Features Material: Modified impact acrylic, 2 ply Finish: brushed metal Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: laser, saw, shear* Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Exterior TroLase Metallic & Metallic SR Features Material: Micro-surfaced impact acrylic, 2 ply Finish: brushed or matte metal Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: laser, saw, shear* Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving *Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications. 6 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

5 TroLase Metallic Plus Brushed Stainless Steel/Black 1/32 LMT LMT LMT Brushed Bright Nickel/ Black Brushed Copper/Black 1/32 LMT /32 LMT LMT LMT LMT LMT Brushed Stainless Steel/ Blue Brushed Stainless Steel/Red Brushed Antique Gold/Black 1/32 LMT /32 LMT /32 LMT LMT LMT LMT LMT LMT LMT Laserable Materials TroLase Metallic Smooth Gold/Black 1/32 LMT LMT LMT Brushed Aluminum/Black 1/32 LMT LMT LMT Brushed Copper/Black 1/32 LMT LMT Brushed Gold/Black 1/32 LMT LMT LMT Brushed Silver/Black 1/32 LMT LMT LMT Brushed Deep Bronze/Black LMT European Gold/Black 1/32 LMT LMT LMT Smooth Silver/Black 1/32 LMT LMT LMT Chrome/Black LMT TroLase Metallic SR Brushed Silver/Black LMT SR Smooth Gold/Black LMT SR Smooth Silver/Black LMT SR LMT SR Brushed Gold/Black LMT SR Brushed Aluminum/Black 1/32 LMT SR LMT SR LMT SR European Gold/Black LMT SR Brushed Copper/Black 1/32 LMT SR Brushed Brass/Black LMT SR 7

6 TroLase Reverse Laserable Materials TroLase Reverse consists of transparent acrylic with a coloured coating on the back. By mirror engraving the image into the back, the coloured layer is removed during the engraving process and the becomes transparent in these places. By using acrylic paint to inlay the engraved back, a coloured engraving is created. The smooth surface allows for easy cleaning. Typical Use Signs Exterior Signs Badges Safety Signs Information Signs Material features Material: Micro-surfaced impact acrylic with back-coating, 2 ply Finish: matte non-glare, gloss Thickness: 1/16, 1/8 Engraving depth: Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Exterior Reverse Our Reverse products are very special as we have added the Light Blocker layer a great feature as it eliminates the shadows from the colour fill at the back. 8 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

7 TroLase Reverse Matte Clear/Red LR Matte Clear/Burgundy LR Matte Clear/Ivory LR Matte Clear/Parchment LR Matte Clear/Black LR LR Gloss Clear/Black LR Laserable Materials Matte Clear/Blue LR Matte/Dark Brown LR Matte Clear/Aluminum LR Matte Clear/Navy Blue LR Matte Clear/Yellow LR Matte Clear/Grey LR Matte Clear/Sapphire LR Matte Clear/Gold LR Gloss Clear/Silver LR LR Matte Clear/Blueberry LR Gloss Clear/Gold Matte Clear/Silver LR LR LR Matte Clear/Celadon LR Matte Clear/White LR LR Matte Clear/Pine Green LR Matte Clear/Green LR

8 LaserFlex Laserable Materials LaserFlex is a transfer film for customizing textiles. The laser can reproduce even the finest details with intricate designs. Once the artwork has been engraved or cut out on the laser unit, the design is applied to the textiles using a transfer press. LaserFlex is characterized by good opacity and high elasticity. Typical Use Customization of T-shirts and fabric bags Recommended for cotton, polyester, blended fabrics Less suitable for nylon and coated textiles Flex on flex is possible for multi colour designs Material features Material: Polyurethane on transfer paper Surface: matte Thickness: Engraving depth: Cutting method: laser, shear, scissors Sheet Size: 16.5 x Laser Reverse White Yellow Orange 623SFR SFR SFR 241 Red Blue Navy Blue 623SFR SFR SFR 243 Green Black 623SFR SFR 237 Sample Kit SPK 054 Tips LaserFlex has been specially designed to not only be cut but also to be weeded by laser. This means that it is no longer necessary to mechanically remove excess between graphics and letters or along edges. Recommended transfer conditions: Temperature: 165 C Duration: 17 seconds LaserFlex film can be washed at up to 60 C. Any residues can be removed by washing. 10 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

9 TroLase Lights TroLase Lights are highly flexible and robust films with adhesive coating on the back, which can be laser engraved. The self-adhesive film adheres perfectly to various s such as metals, plastic, rubber, and wood and makes it a popular in industrial and recognition applications. Typical Use Exterior & Signs Badges Trophy Plates Vinyl Lettering Labels / Stickers Labelling of packages Laserable Materials Material features Material: Micro-surfaced 2 ply plastic, with adhesive Finish: gloss, brushed metal Thickness: Engraving depth: Cutting method: laser, shear Sheet Size: 12 x 24 Laser Engraving Exterior Smooth Gold/Black LL Brushed Silver/Black LL White/Black LL Brushed Brass/Black LL Smooth Silver/Black LL Yellow/Black LL Brushed Bronze/Black LL Black/Silver LL Red/White LL Brushed Copper/Black LL Black/Gold LL Black/White LL

10 Digital Print Series Laserable Materials Trotec offers engravable plastic sheet products that are also print receptive. Trotec Digital Print Series line is developed and designed for printing with UV & LED Curing Inks. The surface is pre-treated for superior ink adhesion. The core is made of impact modified acrylic which makes it the perfect product for a combination of printing, laser engraving and laser cutting. Applications signage Personal identification Point of Sale displays Decorative signs Material Features Material: Impact modified acrylic, 1 ply / 2 ply pre-treated for superior ink adhesion Finish: matte and gloss colours, mirrored, radiant and brushed metal Thickness: 1/16 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Tips Metallic finishes enhance your graphics and give them an authentic, brilliant metal look. 12 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

11 Digital Print Series Radiant Silver/Black Radiant Gold/Black Matte Satin Brass/Black Matte White Matte White/BLack Matte White/Red Gloss White Gloss White/Black Gloss White/Red Laserable Materials Matte Brush Aluminum/Black Matte White/Blue Gloss White/Blue Mirror Gold/Black Matte Black/White Mirror Silver/Black Matte Red/White Products are also available on ABS or polystyrene cores and in other gauges on request. Minimum order quantities may apply. 13

12 TroLase ADA Signage Laserable Materials TroLase ADA Signage is a single-layer, dyed, acrylic based. It is ideal for functional signage in indoor and outdoor areas, for cutting out letters or for creating 3-dimensional signs by mounting cut-out shapes on a base plate. In addition, it is an ideal for signs featuring Braille. Typical Use Exterior & Signs ADA Compliant 3-dimensonal Signs Model making Letters & Symbols Material features Material: Single-ply modified acrylic Surface: matte Thickness: 1/32 / 1/16 / 1/8 / 0.04 Cutting method: laser, saw, shear, rotary engraver Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) For Braille Accessories see page 61 Laser Engraving Exterior 14 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

13 TroLase ADA Signage Red Blue 1/32 LS /32 LS LS Black 1/32 1/32 LS LS LS LS ADH LS LS LS Marine Blue LS Best Sellers Bright White 1/32 LS LS LS LS White 1/ LS LS LS Laserable Materials Burgundy 1/32 LS LS LS Light Grey 1/32 LS LS Silver 1/32 LS Yellow 1/32 LS LS Charcoal Grey 1/32 LS LS LS Clear 1/32 LS LS LS Green 1/32 LS LS Dark Brown 1/32 LS LS Order TroLase ADA Signage with self-adhesive film applied to the back. This allows you to easily mount letters cut-out from the plate on base plates or walls. During assembly the cut plate as a template for spacing and as a line level. A few tips for best results: - Materials must be even and without bends or distortions. - A cutting grate should always be d when cutting plastics, in order to lift the. - Remove the protective film, in order to prevent discolouration or excessive smoke. - If excess smoke results, then too much energy is being d. In this case increase the speed. Tips 15

14 TroLase Thins Laserable Materials TroLase Thins are thinner and more flexible than traditioal engraving s. As a result, it is particularly suited to applications on curved surfaces. The thin surface coating allows detailed engraving at high production speeds. The acrylic based is available in matte colours as well as shiny and brushed metal finishes. Typical Use Signs Badges Trophy Plates Safety Signs Bottle Labels Business Cards Material features Material: Micro-surfaced 2 ply plastic, with or without adhesive Finish: matte non-glare, gloss, brushed metal Thickness: 0.02 Engraving depth: Cutting method: laser, saw, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving This is very often d with a magnetic film applied to the back. To see more information about magnetic films, please turn to page Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

15 TroLase Thins Brushed Gold/Black Brushed Aluminum/Black 0.02 LT LT Europ. Brushed Gold/ Black Brushed Copper/Black 0.02 LT LT Best Sellers White/Black 0.02 LT Black/White 0.02 LT Laserable Materials Trophy Gold/ Black 0.02 LT Brushed Silver/Black 0.02 LT Yellow/Black 0.02 LT Brushed Bronze/Black 0.02 LT Trophy Silver/ Black 0.02 LT Red/White 0.02 LT Smooth Gold/Black 0.02 LT Smooth Silver/Black 0.02 LT Blue/White 0.02 LT Deep Bronze/ Black 0.02 LT Gloss Black/ Silver 0.02 LT Purple/White 0.02 LT Gloss Black/ Gold Matte Black/Silver 0.02 LT LT Verde/Gold 0.02 LT Matte Black/Gold 0.02 LT Celestial Blue./Gold Port Wine/Gold 0.02 LT LT Black single ply 0.02 LT White single ply 0.02 LT Add -ADH to part number when ordering for adhesive backing. 17

16 TroLase Textures Laserable Materials TroLase Textures are two-layer acrylic based s, suitable for applications in demanding environments, where extra durability and scratch resistance are required. The textured, matte surface is non-reflective, durable and easy to clean. TroLase Textures are UV- and weather-resistant, suitable for indoor and outdoor. Typical Use Exterior & Signs Badges Safety Signs Control Panels Industrial Applications Material features Material: Co-extruded impact acrylic 2 ply Finish: textured matte Thickness: 1/16 / 1/8 Engraving depth: 0.005, Cutting method: laser, saw, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use 18 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

17 Red/White LTX LTX Royal Blue/White LTX LTS Black/White LTX LTX White/Red Winter White/Blue Winter White/Black LTX LTX LTX LTX Laserable Materials Ruby/White LTX Sapphire/White LTX Ash Grey/Black LTX Green/White LTX Teal/White LTX Ash Grey/White LTX Yellow/Black LTX Yellow/Dark Brown LTX

18 ArmorCore Laserable Materials ArmorCore is a laserable plastic that combines the ease of of TroLase with the UV stability and durability of an acrylic cap. The satin finish also allows laser rs to reproduce old signs created with traditional non-laserable satin plastic. Typical Use Exterior & Signs Badges Safety Signs Control Panels Industrial Applications Material features Material: Impact acrylic 2 ply Finish: matte or brushed Thickness: 1/16 Engraving depth: Cutting method: laser, saw, shear Laser Engraving Outdoor Use White/Red M S White/Blue M S White/Black M S Red/White M S Blue/White M S Black/White M S Yellow/Black M S Orange/Black M Grey/White M Pine Green/White M Green/White M S 20 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

19 Smart-X Laserable Foam Board Smart-X is the new print product that provides outstanding possibilities in the field of visual communications. Smart-X is a lightweight, all-plastic sheet with UV and weather resistant solid polystyrene (HIPS) surface and a core of expanded polystyrene that is completely moisture-resistant. Typical Use Life-sized fashion Displays Lare-format or long and narrow signs Self-supporting, free standing structures Decoration Lettering Screen printing Shop design/ Shop fitting Laserable Materials Material Features Material: Lightweight foam board, 1 ply Finish: matt Laser Rotary Exterior Thickness: 5,0 mm (0.2 ), 10,0 mm (0.4 ) Cutting method: laser, saw Sheet sizes: 47.8 x 23.8 (full sheet), 23.8 x 23.8 (half sheet), 23.8 x 11.8 (quarter sheet) UV Print White White mm mm Smart-X is the world s only lightweight foam board for external applications without any significant change in color for a period of up to two years. The following properties make this product unique: Outstanding printability for direct-to-substrate digital printing Excellent laser cutting properties Temperature resistance from -10 C up to +70 C Very good weather resistance - UV stability and moisture-resistance; no warping Very good recycling properties thanks to homogeneous composite - 100% recyclable Tips 21

20 TroGlass Colour Gloss Acrylics This cast acrylic glass is available in a wide range of Colours, in variations of transparent, fluorescent, translucent and non-transparent. Both sides have a glossy finish. The transparent, fluorescent and translucent Colours offer constant light transmission superior to similar glass Colours. TroGlass Colour Gloss features all advantages of cast acrylic, especially in terms of impact resistance, light diffusion and handling capabilities. Typical Use Illumination and lighting Visual co unication Signage, Display, POP Shop fitting design and furnishing Material features Material: cast acrylic Finish: gloss Translucency: transparent, fluorescent, translucent, non-transparent Thickness: 1/8 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use Perfect light transmission with up to 92% in clear version - better than that of glass Impact resistance 8 to 10 times higher than glass Elegant polished finish when laser cut High resistance to external agents and UV rays UV-stable and weatherproof Easy to work with (laser cut/engrave, bend, glue, thermoforming, milling) Tips 22 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

21 TroGlass Colour Gloss transparent Glass Look Red transparent Ice Blue transparent Yellow transparent Green transparent Blue transparent Acrylics fluorescent Orange transparent Dark Green transparent Ice Blue fluorescent Yellow fluorescent Red fluorescent Lilac translucent Orange fluorescent Green fluorescent White opal White translucent Fuchsia translucent Grey Yellow translucent Green translucent Black Orange translucent Dark Green translucent Sky Blue translucent Carmine Red Red translucent translucent Blue translucent Metallic Metallic Gold Metallic Silver Metallic bright sliver Metallic anthracite-silver

22 TroGlass Frosted and LED Acrylics TroGlass Frosted is a heavy-duty cast acrylic glass with a matt, roughly structured surface on both sides ( sandblasted finish ). The frosted surface, combined with the intrinsic hardness of cast acrylic, allows applications where higher strength and robustness are required. TroGlass LED is a cast acrylic glass, optimized to LED light waves. This allows high light transmission and strong light diffusion while spot effects, typical of LED lights, are eliminated. Typical Use Signs Illumination and backlighted signs Visual co unication Signage Display, POP Shop fitting design and furnishing Material features TroGlass Frosted Material: cast acrylic Finish: matt, sandblasted textures Translucency: translucent Thickness: 1/8 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use Material features TroGlass LED Material: cast acrylic Finish: gloss Translucency: translucent Thickness: 1/8 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use TroGlass LED Tips TroGlass LED is an optimized cast acrylic sheet, developed to adjust itself to the particularity of LED lighting: Colours are formulated to meet the wavelength of LEDs: the sheets maintain the same colour tone with backlights being turned on and off. It allows a high light transmission. The strong diffusion characteristics eliminate spot effects. 24 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

23 TroGlass Frosted White Light Pink Ice Blue Light Yellow Fuchsia Lilac Acrylics Orange Mint Green Blue Red Green TroGlass LED White matte Orange Green White Red Blue

24 TroGlass Satins and Duo Acrylics TroGlass Satins cast acrylic glass is available in a wide range of colours, in variations of transparent, translucent and nontransparent. Both sheet sides have a satin surface that give an elegant and soft feeling and appearance. TroGlass Duo is a cast acrylic glass with one matt and one glossy side. The Night and Day colour variation allows for a change in colour when backlighted. While being black when not backlighted, the colour turns bright with the backlight turned on. Typical Use Illumination and backlighted signs Visual communication Signage, Display, POP Shop fitting design and furnishing Material features TroGlass Satins Material: cast acrylic Finish: matt Translucency: translucent, non-transparent Thickness: 1/8 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use Material features TroGlass Duo Material: cast acrylic Finish: one side matt, one side glossy Translucency: translucent Thickness: 1/8 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use Special Product TroGlass Duo Night & Day: allows the creation of sophisticated signs, giving the possibility of having 2 colours in the same product: black when not backlighted bright when the sign is backlighted Tips 26 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

25 TroGlass Satins Clear Red translucent Ice Blue translucent Yellow translucent Light Pink translucent Blue translucent Acrylics Orange translucent Fuchsia translucent Aquamarine translucent Bright Orange Lemon Green translucent Violet translucent translucent White Black TroGlass Duo Clear Night and Day White Black

26 TroGlass Reverse Acrylics TroGlass Reverse is a transparent, cast gloss acrylic with a coloured coating on the reverse side. By reverse engraving the back and infilling the engraved areas with colour or backlighting, an elegant finish can be created. A third layer of Black backing significantly reduces the cleaning time and enhances the depth of colour. Typical Use Signs Exterior Signs Safety Signs Promotional & Display Signage Material features Material: Micro-surfaced impact acrylic with back-coating, 2 ply Finish: gloss Engraving depth: Thickness: 1/8, 1/5 Cutting method: laser, saw Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Laser Engraving Outdoor Use Reverse Gloss/White TG /5 TG Gloss/Red TG /5 TG Gloss/Light Blue TG /5 TG Gloss/Green TG /5 TG Gloss/Burgundy Gloss/Blue TG4-620 TG /5 TG /5 TG Gloss/Gold TG /5 TG Gloss/Black TG /5 TG Gloss/Silver TG /5 TG Gloss/Bronze Gold TG /5 TG Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

27 TroGlass Clear TroGlass Clear sheets are a great alternative to glass as they offer perfect optical clarity. At the same time they provide the physical benefits of acrylic such as being formable, UV-stable and hard-wearing. Laser engraving produces a white or clear engraved image, depending on the chosen settings. The laser cut produces polished cutting edges and inner contours, no additional post-processing of the is required. Typical Use Signs Exterior Signs Safety Signs Promotional & Display Signage Acrylics Material features Material: Cast acrylic, 1 ply Finish: gloss Thickness: 3 mm (0.118") / 4 mm (0.158") / 5 mm (0.197") 6 mm (0.236") / 8 mm (0.315") / 10 mm (0.394") 15 mm (0.591") / 20 mm (0.787") Cutting method: laser, saw Laser Engraving Outdoor Use Clear mm Full sheet: 23.86'' x 47.87'' 1/2 sheet: 23.86'' x 23.86'' 1/4 sheet: 23.86'' x 11.85'' Clear mm Full sheet: 23.54'' x 47.24'' 1/2 sheet: 23.54'' x 23.54'' 1/4 sheet: 23.54'' x 11.69'' Clear mm Full sheet: 23.54'' x 47.24'' 1/2 sheet: 23.54'' x 23.54'' 1/4 sheet: 23.54'' x 11.69'' Clear mm Full sheet: 23.86'' x 47.87'' 1/2 sheet: 23.86'' x 23.86'' 1/4 sheet: 23.86'' x 11.85'' Clear mm Full sheet: 23.54'' x 47.24'' 1/2 sheet: 23.54'' x 23.54'' 1/4 sheet: 23.54'' x 11.69'' Clear mm Full sheet: 23.54'' x 47.01'' 1/2 sheet: 23.54'' x 23.54'' 1/4 sheet: 23.54'' x 11.63'' Clear mm Full sheet: 23.86'' x 47.87'' 1/2 sheet: 23.86'' x 23.86'' 1/4 sheet: 23.86'' x 11.85'' Clear mm Full sheet: 23.54'' x 47.24'' 1/2 sheet: 23.54'' x 23.54'' 1/4 sheet: 23.54'' x 11.69'' 29

28 TroPly TroPly features a thin surface coating, which allows for intricate details and fast engraving without shading effects. The reflection-free surface allows clear and easy-to-read designs to be created of the very smallest engraved images. Typical Use Signs Badges Trophy Plates Safety Signs Information Signs Rotary Materials Material features Material: ABS, 2 ply Surface: matte Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: saw, cutting bits Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) White/Red P Red/White 1/32 P P P Engraving Yellow/Black 1/32 P P P Blue/White 1/32 P P P Best Sellers White/Black 1/32 P P P Black/White 1/32 P P P Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs. 30 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

29 TroPly Red/Bright White 1/32 P P Light Blue/White P White/Green P Burgundy/White 1/32 P P P Sapphire/White P P White/Pine Green P Orange/White 1/32 P P Blue/Bright White 1/32 P P White/Blue P P Yellow/Red P Purple/White 1/32 P P Navy Blue/White P Bright Green/White 1/32 P P P Ivory/Dark Brown 1/32 P P Almond/Black 1/32 P P P Rotary Materials Walnut/Bright White P Pine Green/White 1/32 P P P Smoke Grey/White 1/32 P P P Engl. Walnut/ Bright White P Celadon Green/White P Light Grey/White P Dark Walnut/White P Medium Brown/White 1/32 P P Light Grey/Black 1/32 P P Red/White/Red P Dark Brown/White P Blue/White/Blue P Black/White/Black P Pink/White P Light Grey/Blue P Yellow/Black/Yellow P Pink/Black P White/Black/White P Black/Bright White 1/32 P P

30 TroPly Metallic Plus and TroPly Metallic TroPly Metallic is characterized by a precious metal look and is ideal for the finest details with clear contrast as well as fast and cost-efficient processing. TroPly Metallic Plus features a special protective layer, which is particularly resistant to scratches and wear. Typical Use Signs Badges Trophy Plates Safety Signs Information Signs Rotary Materials TroPly Metallic Plus Features Material: ABS, 2 ply Finish: brushed or matte metal Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: saw, cutting bits Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving TroPly Metallic Features Material: ABS, 2 ply Finish: brushed or matte metal Thickness: 1/32 / 1/16 / 1/8 Engraving depth: Cutting method: saw, cutting bits Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving 32 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

31 TroPly Metallic Plus Brushed Gold/Black PMT PMT Brushed Silver/Black Deep Bronze/Black PMT PMT European Gold/Black PMT PMT Smooth Silver/Black PMT PMT Brushed Copper/Black PMT Smooth Gold/Black PMT PMT Brushed Aluminum/Black PMT PMT Brushed Aluminum/Blue PMT Brushed Brass/Black PMT Brushed Bronze/White PMT Rotary Materials TroPly Metallic Brushed Gold/Black 1/32 PMT PMT PMT Brushed Silver/Black 1/32 PMT PMT PMT Deep Bronze/ Black PMT European Gold/Black 1/32 PMT PMT Silver/Black 1/32 PMT PMT PMT Brushed Copper/Black 1/32 PMT PMT Smooth Gold/Black 1/32 PMT PMT PMT Brushed Aluminum/Black 1/32 PMT PMT PMT Brushed Bronze/White PMT Brushed Gold/Blue PMT Brushed Silver/Blue PMT Smooth Silver/Black 1/32 PMT PMT

32 TroPly Satins TroPly Satins are available in a large range of colours, in a brushed gloss finish. The solid top layer provides increased protection against scratches or abrasion. Specially designed for indoor, where a warm appearance in combination with durability and resistance is required. Typical Use Signs Badges Safety Signs Information Signs Rotary Materials Material features Material: Acrylic cap / ABS core, 2 ply Finish: brushed gloss Thickness: 1/32 / 1/16 / 1/8 Engraving Depth: Cutting method: saw, cutting bits, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving Selected colours are also available in a 3-ply finish. Here, in addition to the surface and core layers there is an extra layer in the colour and thickness of the surface layer applied on the back. 34 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

33 35 TroPly Satins Rotary Materials Orange/White Orange/Black Yellow/Black Green/White Purple/White Polar White/Black White/Black White/Red Grey/White Grey/Black 1/32 Sapphire/White White/Green Red/Black White/Blue Airforce Blue/White Red/White Black/White PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Black/White/Black White/Black/White Yellow/Black/Yellow White/Red/White White/Blue/White Red/White/Red Burgundy/White/ Burgundy Green/White/Green Blue/White/Blue PS PS PS PS PS PS PS PS PS PS Best Sellers Burgundy/White PS

34 TroPly Ultra TroPly Ultra is an UV stable laminate for indoor and outdoor applications in a matte, reflection-free finish. The deeper top layer provides increased protection against damage and makes TroPly Ultra the preferred for in harsh environments. TroPly Ultra can also be cut with a laser. Typical Use Exterior & Signs Badges Safety Signs Control Panels Braille Signage Rotary Materials Material features Material: Laminated impact acrylic, 2 ply Surface: matte Thickness: 1/16 / 1/8 Engraving Depth: Cutting method: saw, cutting bits, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving Exterior 36 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

35 TroPly Ultra Best Sellers White/Red PU PU Yellow/Black PU PU White/Black PU PU Red/White PU PU Blue/White PU PU Black/White PU PU Ruby/White PU Bright Green/White PU PU Sapphire/White PU Safety Yellow/ Black PU PU Vintage Gold/Black PU Vintage Silver/Black PU PU Rotary Materials Hunter Green/White PU White/Blue PU PU Black/Gold PU

36 TroPly HiGloss TroPly HiGloss is an UV-resistant laminate with a high-gloss surface suitable for indoor and outdoor. A thick top layer provides extra protection and resistance to scratches and abrasion. The consists of modified acrylic and is therefore suitable for laser cutting. Due to the thickness of the top layer, signs should be created with mechanical engraving devices for best results. Typical Use Exterior & Signs Badges Safety Signs Information Signs Braille Signage Rotary Materials Material features Material: Laminated impact acrylic, 2- / 3 ply Finish: gloss Thickness: 1/16 / 1/8 Engraving Depth: Cutting method: saw, cutting bits, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving Exterior Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of the core, allowing for double sided signs. 38 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

37 TroPly HiGloss 39 Rotary Materials Red/White Vintage Gold/ Black Sapphire/White Yellow/Black Vintage-Silver/ Black Blueberry Blue/White Safety Yellow/Black Black/White Green/White White/Red Teal Green/White Black/Gold White/Blue Blue/White Ruby/White Ivory/Dark Brown White/Black PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH PH Black/White/ Black White/Black/ White White/Red/ White Red/White/ Red Green/White/ Green Blue/White/ Blue PH PH PH PH PH PH PH PH Best Sellers

38 TroPly Ultra Reverse TroPly Ultra Reverse consists of transparent acrylic with a coating on the back. A transparent image is created by engraving the coloured back. This engraving can then be filled with colours. The protective transparent acrylic in combination with the relatively deep coloured layer on the back makes TroPly Ultra resistant to adverse external influences and easy to clean. Typical Use Exterior & Signs Badges Safety Signs Information Signs Braille Signage Rotary Materials Material features Material: Laminated impact acrylic, 1- / 2 ply Surface: matte Thickness: 1/32 / 1/16 / 1/8 Engraving Depth: Cutting method: saw, cutting bits, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving Exterior Reverse Clear single ply 1/32 PUR PUR PUR Matte/Sapphire PUR Matte/Black PUR PUR Matte/White PUR PUR Matte/Blueberry Blue PUR Matte/Red PUR Matte/Ivory PUR Matte/China Blue PUR Matte/Burgundy PUR Matte/Vintage Silver PUR PUR Matte/Green PUR Matte/Yellow PUR Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

39 TroPly HiGloss Reverse TroPly HiGloss Reverse is polished to a high gloss finish and can be marked on the back, thus creating high-quality signage products. The is UV stable and weather-proof and therefore suitable for indoor and outdoor. A 3D effect can be achieved by using an appropriate milling cutter. The is ideal for backlighting. Typical Use Signs Exterior Signs Information Signs Badges Signs with advertising impact Rotary Materials Material features Material: Acrylic, 1- / 2 ply Finish: gloss Thickness: 1/16 / 1/8 Engraving Depth: Cutting method: saw, cutting bits, shear Sheet sizes: 48 x 24, 24 x 24 (half), 24 x 12 (quarter) Engraving Exterior Reverse Clear/Red PHR PHR Clear/Blue PHR PHR Clear/White PHR PHR Clear/Burgundy Clear/Sapphire Clear/Ivory PHR PHR PHR Clear/Yellow Clear/Blueberry Blue PHR PHR PHR PHR Clear/Silver PHR Clear/Green Clear/ Clear/Black PHR Teal Green PHR PHR PHR PHR Clear single ply PHR PHR

40 Anodized Aluminum Anodized or colour anodized aluminum is suitable both for engraving with a CO 2 laser and with mechanical engraving devices. The protective anodized coating remains intact during laser processing. The image contrast is cad by the removal of the coloured coating and almost photographic qualities can be achieved. A detailed, white engraved image is created. Typical Use Signs Type Plates Serial Numbers Barcodes Signs with advertising impact Anodized Aluminum features Metals Material: Anodized Aluminum, colour coating over silver aluminum Finish: matte, gloss Thickness: 0.02 / / 0.04 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Laser Engraving 42 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

41 Anodized Aluminum Stock size 12 x 24 sheets, 24 x 48 available by special order Satin Silver Satin Black Satin Blue Bright Silver Bright Gold Satin Red Satin Gold Metals 43

42 Aluminum Aluminum sheets allow for engraving to a bright silver finish. It is lightweight and easy to cut, providing an economical solution for industrial and awards applications. Typical Use Signs Trophy and Plague Plates Machinery ID Memorial Plates Laserable Aluminum Features Metals Material: Aluminum, colour coating over silver, black, white or gold aluminum Finish: matte, gloss Thickness: 0.02 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Laser Engraving Exterior Aluminum Features Material: Aluminum, colour coating over silver aluminum Finish: matte, gloss, brushed Thickness: 0.02 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Engraving Exterior 44 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

43 Laserable Aluminum 12 x 24 sheets, 24 x 48 available by special order Silver Metallic/Black Black/White Matte Gold/Black Matte Silver/Black White/Black Gloss Black/Gold Black/Silver Bright Red/Silver LASER RED ALU Dark Green/Silver LASER GRN ALU Bright Blue/Silver LASER BLU ALU Purple/Silver LASER PPL ALU Aluminum 12 x 24 sheets, 24 x 48 available by special order Gloss Black/Silver Satin Blue/Silver Bright Gold/Silver Bright Silver/Silver Bright Red/Silver Opaque Brown/Silver Metals Satin Copper/Silver Dark Green/Silver Satin Green/Silver Opaque Maroon/Silver Opaque Yellow/Silver Opaque White/Silver Matte Black/Silver Opaque Orange/Silver Opaque Red/Silver Bright Purple/Silver Royal Blue/Silver Satin Gold/Silver Satin Silver/Silver Satin Silver Double Sided Satin Violet/Silver Black/Silver

44 Brass Brass is a premium that results in a lustrous gold finish when engraved. Made from a combination of copper and zinc, it can be oxidized to produce black text. Premium Leaded Brass has a small amount of lead and a much higher copper to zinc ratio which makes it easier to engrave and oxidize to a truer black. Typical Use Exterior & Signs Type Plates Serial Numbers Barcodes Signs with advertising impact Brass Features Metals Material: Clear or coloured lacquer coating over gold brass Finish: matte, gloss, brushed Thickness: 0.02 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Engraving Laserable Brass Features Material: Coloured lacquer coating over gold brass Finish: gloss Thickness: Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Laser Engraving Premium Engraver s Leaded Brass Features Material: Clear lacquer or metallic plating over brass Finish: satin, gloss Thickness: 0.02 / / / 0.04 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Engraving 46 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

45 Laserable Brass 12 x 24 sheets, 24 x 48 available by special order Gloss Black/Brass Classic Marble Red/Brass Classic Marble Blue/Brass Classic Marble Grey/Brass Classic Marble Green/Brass Brass 12 x 24 sheets, 24 x 48 available by special order Gloss Black/Gold Blue/Gold BLUE BRASS Bright Gold/Gold Bright Red/Gold 0.02 BRIGHT RED BRS Brown/Gold BROWN BRASS Satin Gold/Gold Dark Green/Gold GREEN BRASS Maroon/Gold MAROON BRASS Matte Black/Gold MATTE BLK BRS Opaque Red/Gold RED BRASS Purple/Brass PURPLE BRASS Royal Blue/Gold ROY BLU BRASS Metals Satin Gold Double- Sided Brass White/Gold WHITE BRASS Premium Engraver s Leaded Brass 12 x 24 sheets, 24 x 48 available by special order Satin Yellow Satin Yellow STN LEAD BRAS Satin Yellow Satin Yellow Satin Yellow Bright Yellow Satin Silver/Gold 0.02 STN SIL BRASS Satin Copper/Gold 0.02 SATIN COPPER 47

46 Steel, Nickel and Sublimation Metals Brass coated steel offers the finished look of brass at an economical price. Stainless Steel can be rotary engraved and the unlacquered steel is ideal for engraving with the Cermark product line. Nickel Silver is ideal for oxidizing and for sublimation. Typical Use Exterior & Signs Type Plates Serial Numbers Barcodes Signs with advertising impact Brass Coated Steel Features Material: Steel with brass plating, with or without colour coat Finish: gloss, brushed Thickness: / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Laser Engraving Exterior Metals Stainless Steel and Nickel Material: Stainless Steel type 430, type 304, or Nickel Silver Finish: gloss, brushed Thickness: /0.018 /0.020 /0.022 /0.029 / Cutting method: saw, cutting bits, shear Sheet sizes: 24 x 12 Sublimatable Metals Engraving Exterior Sublimatable Metals incorporate a high quality coating which accepts maximum dye transfer with crisp detail. Most can be engraved after printing for additional personalization. Typical Use Name Badges Awards Photographic Reproduction POP Displays Sublimation Metals features Material: Aluminum, steel Finish: gloss, brushed Thickness: 0.02 / / / 0.04 / / Cutting method: saw, shear Sheet sizes: 24 x 12 Laser Engraving Exterior 48 Recommended Heat Setting: 380 degrees F, 35 seconds, with medium pressure. Our Unlacquered stainless steel can be engraved to black using a Fber laser or CO2 laser and Cermark compound. Nickel can be engraved the same way, or diamond dragged and oxidized to produce black text. Nickel and lacquered steel can also be sublimated. Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

47 Brass Coated Steel 12 x 24 sheets, 24 x 48 available by special order Gloss Black/Brass Gloss Blue/Brass Gloss Purple/Brass Gloss Red/Brass Laser Sub. White/Brass Sublimation Opaque Green/Brass Opaque Blue/Brass Opaque Red/Brass Classic Marble Red/Brass Classic Marble Blue/Brass Classic Marble Green/Brass Classic Marble Grey/Brass Brass Coated Steel Sublimation Non-Laserable Satin Copper Plated Steel Sublimation Non-Laserable Stainless Steel and Nickel For black engravings must Thermark Satin Silver Lacquered Sublimation Satin Nickel Silver Bright Silver Satin Silver Unlacquered Unlacquered Satin Stainless Steel Type Sublimation Metals Sublimation Metals 12 x 24 sheets, 24 x 48 available by special order Satin Gold Dynasub Alum Satin Gold Sublicoat Alum Satin Silver Dynasub Alum Satin Silver Sublicoat Alum White Dynasub Alum Premium White Bright Gold Bright Silver Sublicoat Alum Sublicoat Alum Gloss White LaserSub Steel Satin Gold Plated Steel Subli Satin Silver Laquered S/S Subli Dynasub Satin Bronze Alum

48 DuraBlack DuraBlack is a coated aluminum with a black surface, which can be marked in white with a CO 2 laser. Due to the additional layer of protection, DuraBlack is particularly resistant to environmental influences (weathering, salt water, chemicals, etc.). DuraBlack conforms with various industrial and military standards, including MIL-STD 130N, A-A (MIL-P-514D) and MIL-STD-15024F, Type L. Typical Use Exterior & Signs Type Plates Badges Materials Handling Military Signage Material features Metals Material: Coated Aluminum Surface: matte Thickness: / Cutting method: saw, shear Sheet sizes: 24 x 12 Laser Exterior Black matte D 10 x 12 x with adhesive D 20 x 12 x D 20 x 24 x Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

49 Alumamark Alumamark is a coated aluminum with a brushed or matte metallic surface, which can be marked in black with a CO 2 laser. AlumaMark is designed in such a way that even low laser power levels can create a high-contrast engraving. Typical Use Signs Name Plates Badges Trophy Signs Labels Material features Material: Coated Aluminum Surface: brushed or matte Thickness: / Cutting method: saw, shear Sheet sizes: 24 x 20, 20 x 12, 12 x 10 Laser Metals Satin Red D Satin Gold D D* Mirrored Silver D Satin Yellow D Mirrored Gold D Matte Silver D D* Satin Orange D Satin Bronze D Satin Silver D** w/ adhesive D D w/ adhesive D* Satin Green D Satin Brass D D* Satin 5 Colour Pack D** Satin Blue D * 20 x 24 ** 10 x 12 51

50 Solid Wood Available in five luxurious finishes our solid wood panels are ideally suited for the requirements of laser processing. A sanded, matt and varnished surface offers an authentic high quality appearance and durability. Our panels are incredibly versatile and can be d for a multitude of applications such as small interior signage, interior decorations, fashion accessories and promotional giftware. Typical Use Signs Arts and crafts Promotional items Awards and trophies Material features Material: Solid Wood Finish: sanded and varnished, matt Thickness: 3/16, (Alder) Cutting method: saw, laser Sheet size: 23.5 x 11.75, x 3.9 (pack of 20) Laser Exterior Woods 52 Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

51 Solid Wood Maple Oak 23.5 x x 3/ x x 3/ x 3.9 x 3/ x 3.9 x 3/ Cherry Walnut 23.5 x x 3/ x x 3/ x 3.93 x 3/ x 3.9 x 3/ Alder 23.5 x x 3/ x 3.9 x 3/ x 3.9 x Woods 53

52 Wood Veneer Our veneered wood is supplied with a formaldehyde free fiber board core with real wood laminated on each side. Sanded smooth with semi-matt varnish, they are suitable for a wide range of applications. Typical Use Signs Gifts Architectural model making Arts and crafts Material features Material: Veneered Wood Sheets Finish: semi-matt, sanded and varnished Thickness: 1/8 Cutting method: saw, laser Sheet size: 23.5 x Laser Exterior Cherry Cedar Woods Birch Bamboo Walnut Maple Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability

53 Plywood and MDF The MDF fibreboard panels feature a high surface quality and homogenous fibre structure. The high fibre density allows for great results even in fine-detail laser cutting. The Plywood panels are made from softwood, combining lightweight characteristics with improved dimensional stability. The untreated, bright surface is ideal for laser marking or to be painted on. Typical Use Signs Gifts Architectural model making Arts and crafts Material features Material: MDF, Plywood poplar Finish: Untreated Thickness: 1/8, 1/4 Cutting method: saw, laser Sheet size: 48 x 23.5 (MDF), 24 x 11.75, x Laser Exterior Plywood 23.5 x /8" 1/4" x /8" MDF 48 x /8" 1/4" 23.5 x /8" 1/4" x /8" 1/4" Woods Tips We recommend that you allow time for the wood to acclimatise to its new environment before processing. Ideally maintain in an area with constant temperature/humidity. 55

54 Badge Findings All badges engrave to gold. For colour, you can oxidize or colour fill after engraving. Fastners and clips come in bags of 50, magnets come in bags of 50 pieces. Fasteners S P S P White Bar Pin Plastic 1.5 Long Self-Adhesive White Bar Pin Plastic 1.5 Long Non-Adhesive Bar Pin Metal, 1.5 Long Self-Adhesive Bar Pin Metal, 1.5 Long Non-Adhesive SG PG PG Military Bar 2 Vinyl with Clutch Self Adhesive Military Bar 2 Vinyl with Clutch Non-Adhesive Single Tack with Clutch Clips P S H Bull Dog Pressure Clip Plastic Base 3/4 x 3/4 Badge Clip, Metal 3/4 Square Swivel Self-Adhesive Metal Clip with Clear Swivel Strap Magnets Accessories 128-MO1 128-MO2 128-MO3 Steel Cover Magnet 1.8 x.55 Plastic Cover 1.75 x.5 Plastic Cover 1.3 x.45 Magnet Magnet 128-MO4 128-MO5 Round Magnet.65 x.65 Triple Magnet 1.8 x.5 Plastic Cover 60

55 Metal Name Badges 3/8 x 2 1/4 Satin Gold Finish Colour Clutch Pin Back Blank Bright Gold 352-MBG38C 352-MBG38P 352-MBG38CB Satin Gold 352-MSG38C 352-MSG38P 352-MSG38CB Bright Silver 352-MBS38C 352-MBS38P 352-MBS38CB Satin Silver 352-MSS38C 352-MSS38P 352-MSS38CB Chrome Plated 352-MCP38C 352-MCP38CB 1/2 x 2 3/8 Bright Gold Finish Colour Clutch Pin Back Blank Bright Gold 352-MBG12C 352-MBG12P 352-MBG12CB Satin Gold 352-MSG12C 352-MSG12P 352-MSG12CB Bright Silver 352-MBS12C 352-MBS12P 352-MBS12CB Satin Silver 352-MSS12C 352-MSS12P 352-MSS12CB Chrome Plated 352-MCP12C 352-MCP12CB 5/8 x 2 1/2 Satin Silver Finish Colour Clutch Pin Back Blank Bright Gold 352-MBG58C 352-MBG58P 352-MBG58CB Satin Gold 352-MSG58C 352-MSG58P 352-MSG58CB Bright Silver 352-MSB58C 352-MSB58P 352-MSB58CB Satin Silver 352-MSS58C 352-MSS58P 352-MSS58CB Chrome Plated 352-MCP58C 352-MCP58CB 3/4 x 3 Bright Silver Finish Colour Clutch Pin Back Blank Bright Gold 352-MBG34C 352-MBG34P 352-MBG34CB Satin Gold 352-MSG34C 352-MSG34P 352-MSG34CB Bright Silver 352-MSB34C 352-MSB34P 352-MSB34CB Satin Silver 352-MSS34C 352-MSS34P 352-MSS34CB Chrome Plated 352-MCP34C 352-MCP34CB 1 x 3 Chrome Plated Finish Colour Clutch Pin Back Blank Bright Gold 352-MBG1C 352-MBG1P 352-MBG1CB Satin Gold 352-MSG1C 352-MSG1P 352-MSG1CB Bright Silver 352-MSB1C 352-MSB1P 352-MSB1CB Satin Silver 352-MSS1C 352-MSS1P 352-MSS1CB Chrome Plated 352-MCP1C 352-MCP1CB Accessories Name Tag Blanks Trotec Laser Canada makes custom name badge blanks. We are able to make virtually any shape and size, ranging from your basic rectangle bevelled tags, rounded corners or custom shapes. Your Logo Here Address Here Engraving also available Your Customer Information Here Visit our website: 61

56 Badge Accessories Brass Ornamental Plates Part Number Sizes Colour /8 x 2 1/2 brass ornamental plate Satin Gold /2 x 3 brass ornamental plate Satin Gold /4 x 3 1/2 brass ornamental plate Satin Gold /4 x 4 brass ornamental plate Satin Gold Split Rings Part Number Size Quantity Colour /2 100/box Silver /box Silver /4 100/box Silver /box Brass Brass Tags w/ Hole Part Number Size Quantity Hole Size /4 100/box 4 mm /box 4 mm /4 100/box 7 mm /8 100/box 7 mm /8 100/box 8 mm Ball Chain Part Number Size Quantity Colour Accessories No. 6 Ball Chain 100ft Spool Nickel Plated Steel No. 3 Ball Chain 100ft Spool Nickel Plated Steel No. 6 Connector Ball Chain 100/pkg Nickel Plated Steel Ball Chain End Couplings 100/pkg Nickel Plated Steel No. 3 Connector Ball Chain 100/pkg Aluminum No /2 Ball Chain (Pre-Cut) 100/pkg Nickel Plated Steel S Hooks Part Number Size Quantity Colour S 1/2 Tall 25/bag Silver G 1/2 Tall 25/bag Brass 62

57 Tapes, Velcro & Adhesive Sublimation Heat Tape Part Number Description Sizes 058-CW High Temperature Tape for Sublimation 1/2 x 60 yrds Engraving Table Tape Part Number Description Sizes 058-TWO-SIDED Two-Sided Table Tape 1/2 x 72 yrds 058-TT Two-Sided Table Tape 3/4 x 60 yrds Adhesive Rolls and Sheets Part Number Description Sizes 0583M-ADHESIVE 3M Adhesive 3M Adhesive # x 60 yrds 0583M-468MP 3M Adhesive 3M Adhesive #468MP 24 x 60 yrds 0583M ADH SHEETS 3M Adhesive 3M Adhesive # x M ADHESIVE12 3M Adhesive 3M Adhesive # x 60 yd 0583M-467MP 3M Adhesive 3M Adhesive # x 180 yd 058S234 Economy Adhesive Tape, S234 Double Coated 12 x 60 yds Magnetic Tape Part Number Description Sizes 670-PSA-.5 Magnetic Tape w/ PSA x 100 x PSA-.75 Magnetic Tape w/ PSA x 100 x PSA-1 Magnetic Tape w/ PSA x 100 x 1 623SUS 225 Magnetic Sheet w/ PSA 12 x24 Self Adhesive Accessories Velcro Rolls Part Number Description Sizes Velcro Loop Black 3/4 x 25 yrds Velcro Hook Black 3/4 x 25 yrds Velcro Loop Black 1/2 x 25 yrds Velcro Hoop Black 1/2 x 25 yrds Velcro Loop Black 1 x 25 yrds Velcro Hoop Black 1 x 25 yrds Velcro Loop White 3/4 x 25 yrds Velcro Hook White 3/4 x 25 yrds Velcro Loop White 1/2 x 25 yrds Velcro Hook White 1/2 x 25 yrds Velcro Loop White 1 x 25 yrds Velcro Hook White 1 x 25 yrds 64

58 Foam Tape Part Number Thickness Sizes 058-CW /2 x 36 yrds 058-CW /4 x 36 yrds 058-CW x 36 yrds 058-CW /2 x 36 yrds 058-CW /32 3/8 x 72 yrds 058-CW /32 1/2 x 72 yrds 058-CW /32 3/4 x 72 yrds 058-CW /32 1 x 72 yrds 058-CW /32 2 x 72 yrds 058-S /4 x 25 yrds Double Sided Application Tape - Scapa Part Number Sizes /4 x 36 yrds /2 x 36 yrds /4 x 36 yrds x 36 yrds /2 x 36 yrds x 36 yrds x 36 yrds x 36 yrds x 36 yrds Double Sided Application Tape - TESA Part Number 058TT TT TT TT TT TT TT TT Sizes 9mm x 55m (3/8 in) 12mm x 55m(1/2 in) 19mm x 55m (3/4 in) 25mm x 55m (1 in) 38mm x 55m (1.5 in) 50mm x 55m (2 in) 75mm x 55m (3 in) 101.6mm x 55m (4 in) Accessories Masking Part Number 058-GXP GXP GXP Sizes 6 x 72 yrds 8 x 72 yrds 12 x 72 yrds Part Number Sizes 058A Film, Blue PVC Surface 3mil x 12 x SUS 188 LiquaMask - Half Gallon 623SUS 189 Liquid Mask - Quart 700LASERS EDGE 6 x 25 yds Lasers ft Edge (red) Visit our website: 65

59 Tapes, Velcro & Adhesive Felt Pads Part Number Description Sizes /2 diameter 1,000/roll Oxidizer Part Number Description Volumes 786-A384-8 A-384 Oxidizer for Aluminum 8 oz 786-A384-4 A-384 Oxidizer for Aluminum 4 oz 786-B/OX324-8 B/OX 324 Oxidizer for Brass 8 oz 786-B/OX324-4 B/OX 324 Oxidizer for Brass 4 oz Multi Mat Part Number Description Sizes G01-MULTI MAT Sold by the Square Foot Master Sheet - 24 x 48 Laser Foil Part Number Description Sizes Accessories 700-FOIL BLUE Metalized Blue Foil 6 x FOIL BR GOLD Metalized Bright Gold Foil 6 x FOIL GREEN Metalized Bright Green Foil 6 x FOIL RED Metalized Red Foil 6 x FOIL SILVER Metalized Bright Silver Foil 6 x FOIL STN GOLD Brushed Gold Foil 6 x 25 Cleaning Products Part Number Description TRP69248 LENS CLEANER TRP69249 LENS TISSUE oz Triflow Lubricant 66 Not all colour & thickness combinations are stock items, please call for availability

60 Cable Tags Trotec Laser Canada stocks stainless steel cable tags in the most common sizes and configurations, all laser cut or die punched to ensure consistency from piece to piece and from order to order. They are ideal for with the Cermark metal marking compounds, or for direct marking with Fiber lasers or rotary engravers. Custom sizes and hole configurations are available upon request. Part Number Description SAP TAG1.5SS 1 1/2 in Dia. Tag w/.250 in hole, # TAG1H343 3/4 x 3 Cable tag with 1/8 holes, #304 SS TAG1H343.25H 3/4 x 3 Cable tag with 1/4 hole, #304 SS TAG3/4X4 3/4 x 4 Cable tag with 4 slots, #304 SS TAGCABLE.75X3SS 3/4 x 3 Cable tag with 4 slots, #304 SS TAGCABLE 1X2SS2H 1 x 2 Cable tag w 2 holes (.125) #304 SS TAGCABLE 1X3 1 x 3 Blank Cable tag SS - no holes TAGCABLE 1X3SS 1 x 3 Cable tag with 4 slots, #304 SS TAGCABLE 1X3SS1H 1 x 3 Cable tag w 1 hole (.250) #304 SS TAGCABLE 1X3SS2H 1 x 3 Cable tag w 2 holes (.125) #304 SS TAGCABLE 1X3SSUM 1 x 3 Cable tag with 4 slots, unmasked TAGCABLE 1X4 1 x 4 Cable tag with 1 hole TAGTG in Dia. tag with 1 hole, #304 #4 SS /4 x 3 Cable tag with 1/4 hole 1 x 2 Cable tag w 2 holes (.125 ) 1 x 3 Cable tag with 4 slots 2 in Dia. tag with 1 hole Accessories 3/4 x 3 Cable tag with 4 slots 1 x 3 Cable tag w 2 holes (.125 ) 1 x 3 Cable tag with 1/4 holes 3/4 x 3 Cable tag with holes Visit our website: 67

61 Trophy Shields & Pet Tags Our trophy shields and pet tags are die punched for consistent size and quality, from the best engraveable s for easy personalization. Trophy Shields Bright Silver 1.5 x Bright Gold 1.5 x Satin Silver 1.5 x Satin Gold 1.5 x Black 1.5 x Bright Gold 1.5 x Black 1.5 x Bright Silver 1.5 x Black 1.5 x Bright Silver 1.5 x Bright Gold 1.5 x Laserable Shields Matte Silver (will laser to black) 1.5 x Gloss Black (will laser to gold) 1.5 x Accessories Matte Gold (will laser to black) 1.5 x Stainless Steel Pet Tags Gloss Black (will laser to gold) 1.5 x Fire Hydrant 1 x 1 7/ SAP L 6 SS Dog Bone 1 x 1 1/ SAP L 1 SS Military Tag 2 x Heart 1 1/4 x 1 SAP L 9 SS Circles 1 1/4 Diameter SAP L 15 SS Circle w/loop 1 5/16 Diameter SAP

62 Anodized Aluminum Pet Tags Gold Red Blue Purple Pink Green Silver Black Dog 0.8 x Cat 0.87 x Bone Small x 1.2 Large x 1.1 S S L L S S L L S S L L S S L L Heart Small x 0.87 Large x 1.3 S S L L S S L L S S L L S S L L Heart w/ Loop Small - 1 x 1 Large x 1.25 S S L L S S L L S S L L S S L L Circle Small x 0.1 Large x 1.25 S S L L S S L L S S L L S S L L Circle w/ Loop 1.06 x Military 2 x Accessories Hydrant Small - 1 x 0.87 Large x 1.3 S S L S S L L S L S Mo 2 x Dog Ho 1.5 x Visit our website: 69

63 JRS Sign Frames JRS Sign Frames and Holders are made from high quality components in the USA. They perfectly accent your engraved plastic nameplates, and add a finished look to directional and tactile signage. Custom frames can be made to your specifications, call for a quotation on your design. Available Finishes: Bright Rose Gold, Bright Silver, Satin Silver, Black, Bright Yellow Gold Desk Holders A Part No. Size A Size B 85 3/ /4 A Part No. Size A Size B 59 2 Available Lengths: 8 / 10 B / / / /4 B Accessories Available Lengths: 4 / 6 / 8 / 10 / 12 A B Part No. Size A Size B Part No. Size A Size B 85 3/4 A 85 3/ Available Lengths: 8 / 9 / 10 B Available Lengths: 8 / 9 / 10 76

64 Counter & Desk Bases Part No. Size A Size B Max. Sign Height 15 3/ / / / /2 8 Available Lengths: 6 / 8 / 10 / 12 Part No. Size A Size B Max. Sign Height / / / /4 3/32 6 Available Lengths: 3/3-4 / 8 / 10 / 12 Part No. Size A Size B Max. Sign Height Part No. Size A Size B Max. Sign Height /4 2 Available Lengths: 3-3/4 / 8 / 10 / 12 P Available Lengths: 8 / 10 Wall & Corridor Brackets Part No. Size A Size B Part No. Size A Size B 86 1/2" 1/16" 56 1" 1/16" 100 5/8" 1/16" A /2" 1/16" 44 3/4" 1/16" 58 2" 1/16" 28 1" 1/16" /4" 1/16" /2" 1/16" B Available Lengths: 4 / 6 / 8 / 9 10 / 12 / /2" 1/8" /8" 1/16" /4" 1/16" /4" 1/8" 36 2" 1/16" 94 2" 1/8" /2 1/16" /2" 1/8" 37 3" 1/16" 52 3" 1/8" 49 4" 1/16" 51 4" 1/8" Part No. Size A Size B /2 Available Lengths: 2 / 3 / 4 / 5 10 / 12 / 36 Accessories Available Lengths: 4 / 6 / 8 / 10 / 12 / 36 77

65 Desk Holders B c Part No. Size A Size B Size C /2 Available Lengths: 9 / 10 / 12 A B c Part No. Size A Size B Available Lengths: 6 / 8 / 10 Size C /4 1-1/ A B Part No. Size A Size B Size C /4 Available Lengths: 8 / 10 c Available Lengths: 6 / 8 / 10 B A Part No. Size A Size B Size C /2 Desk Holders Part No. Size A Size B Size C Size D /2" 1-1/2" 1-1/2" 1/16" 106 1" 1" 1" 1/16" 109 3/4" 3/4" 3/4" 1/16" Available Lengths: 6 / 8 / 10 / 36 Part No. Size A 75 1/16" 83 1/8" Available Lengths: 6 / 8 / 10 / 36 Accessories Part No. Size A Size B Size D 115 2" 1" 1/16" /2" 1" 1/16" /4" 3/4" 1/16" Available Lengths: 6 / 8 / 10 / 36 Part No. Size A Size D 103 1" 1/16" 114 3/4" 1/16" Available Lengths: 6 / 8 / 10 / 36 Part No. Size A 76 1/16" 84 1/8" Available Lengths: 36 Part No. Size A 27 1/16" Available Lengths: 36 Part No. Size A 78 1/16" Available Lengths: 36 Part No. Size A 77 1/16" Available Lengths: 36 78

66 Architectural Aluminum Frames Part No. Size Style /16" 3/8" Radius Corner /8" 3/8" Radius Corner /16" Square Corners /8" Square Corners Available Lengths: 6 x 6 frame containing 1 x 6 extrusion for a 1/16 message plate and a second 1/16 slot for a 1 x 3 Slider plate to uncover alternating messages. Part No. Size Style /16" 3/8" Radius Corner /8" 3/8" Radius Corner /16" Square Corners /8" Square Corners Available Lengths: 8 x 8 frame containing 1 x 6 extrusion for a 1/16 message plate and a second 1/16 slot for a 1 x 3 Slider plate to uncover alternating messages. Part No. Size Style /16" 3/8" Radius Corner /8" 3/8" Radius Corner /16" Square Corners /8" Square Corners Available Lengths: 2 x 13 slider frame is designed for 2 x 10 message plate to slide left or right to expose message at opposite end. Accessories 79

67 Stand-Offs & Mounting Fixtures Stand-offs are made of solid stainless steel for durability and long lasting quality appearance. Alternative sizes and fixing options offer a wide range of sign and mounting options. Screw caps are the easy to alternative to give a high-quality appearance to a regular screw. A simple cap holder is applied together with the sign using a standard screw. The elegant cap made of solid stainless steel provides for an elegant cover. Stand-off R15-15-FL and R20-20-FL Description Product Size Stainless matt, round, flat head, left-hand thread R15-15-FL Diameter: 15mm (0.59 ) Wall distance: 15mm (0.59 ) Sign hole: 11mm (0.43 ) Thickness of sign: 2-5mm ( ) Package options 4 pieces, incl. mounting srews Pack of 50 pieces Order No R20-20-FL Diameter: 20mm (0.78 ) Wall distance: 20mm (0.78 ) Sign hole: 13mm (0.51 ) Thickness of sign: 3-18mm ( ) 4 pieces, incl. mounting srews Pack of 50 pieces Accessories Stand-off S15-15-FK and S25-25-FK Description Product Size Stainless matt, square, flat head, hex key fixing S15-15-FK Height/Width: 15mm (0.59 ) Wall distance: 15mm (0.59 ) Sign hole: 11mm (0.43 ) Thickness of sign: 2-5 mm ( ) S25-25-FK Height/Width: 25mm (0.98 ) Wall distance: 25mm (0.98 ) Sign hole: 16mm (0.63 ) Thickness of sign: 2-10 mm ( ) Package options 4 pieces, incl. mounting screws + hex key Pack of 50 pieces 4 pieces, incl. mounting screws + hex key Pack of 25 pieces Order No

68 Stand-off E16-16-FK Description Product Size Stainless matt, round, flat head, edge grip, x key fixing E16-16-FK Diameter: 16mm (0.62 ) wall distance: 16mm (0.62 ) Thickness of sign: 3mm (0.12 ) Package options* 4 pieces, incl. mounting screws + hex key Pack of 50 pieces Order No Stand-off R20-15-FK Description Product Size Stainless matt, rount, flat head, hex key fixing R20-15-FK Diameter: 15mm (0.59 ) Wall distance: 20mm (0.78 ) Sign hole: 11mm (0.43 ) Thickness of sign: 1-12mm ( ) Package options* 4 pieces, incl. mounting screws Pack of 50 pieces Order No Screw caps Description Stainless matt, round screw cap, left-hand thread Package options Pack of 20 pieces incl. screw-holder + cap Product Size R10/3-FL Diameter: 10mm (0.39 ) Screw size: 3mm (0.12 ) R15/3.5-FL Diameter: 15mm (0.59 ) Screw size: 3.5mm (0.14 ) R18/4.5-FL Diameter: 18mm (0.71 ) Screw size: 4.5mm (0.18 ) Order No *Package options: Please consider that pack of 25 and 50 pieces are without mounting screws or hex keys. Tips Accessories 81