G-PG ACOUSTIC G-PG CLASSIC G-PG-UKE-CON G-PG-UKE-SOP. backpack straps G-PG-UKE-TEN. backpack straps GWP-PRS

Transcription

1 Music G-PG-ACOUELECT Guitar Pro-Go Series Ultimate Guitar Gig Bags Gator Pro-Go Gig Bags are designed to cradle instruments in luxury while providing the functionality and protection that every musician needs. Modern styling and top-quality materials are combined with innovative engineering and years of case design expertise. Features include: Ultra-thick padded sidewalls, Micro-fleece interior, built-in protective rain cover, multi adjustable removable backpack straps, body block internal shock absorber, protective rubber gripping feet, reinforced handles, cable management straps, sheet music pocket, tablet pocket and a large external storage pocket. Pro-Go Series Double Guitar Bag for Acoustic and Electric Guitar with Micro Fleece Interior and Removable Backpack Straps G-PG-ACOUELECT GAT1057 RRP: GAT1043 RRP: GAT1046 RRP: GAT1059 RRP: G-PG ACOUSTIC Pro-Go series acoustic guitar bag G-PG ACOUSTIC G-PG CLASSIC Pro-Go series classical guitar bag G-PG CLASSIC G-PG-UKE-CON Pro-Go series concert style ukulele bag G-PG-UKE-CON G-PG-UKE-SOP Pro-Go series Soprano Style Ukulele bag with micro fleece interior and removable backpack straps G-PG-UKE-SOP GAT1060 RRP: G-PG-UKE-TEN Pro-Go series Tenor Style Ukulele bag with micro fleece interior and removable backpack straps G-PG-UKE-TEN GAT1061 RRP: GAT1367 RRP: Titan Guitar Series GWP-PRS Titan Series ATA Impact & Water Proof Guitar Case with Power Claw Latches for PRS Guitars G-PG ELECTRIC Pro-Go series electric guitar bag with micro fleece interior and removable backpack straps G-PG ELECTRIC GAT1048 GWP-PRS G-PG-335V Pro-Go Series 335/Flying V Style Guitar Bag with Micro Fleece Interior and Removable Backpack Straps G-PG-335V GAT1368 RRP: GAT1047 RRP: GAT1044 RRP: GAT1045 RRP: G-PG ELEC 2X Pro-Go series bag for 2 electric guitars G-PG ELEC 2X G-PG BASS Pro-Go series bass guitar bag G-PG BASS G-PG BASS 2X Pro-Go series bag for 2 bass guitars G-PG BASS 2X 1

2 Transit Series Guitar Gig Bags 4G Series Gig Bags Transit Series gig bags feature a weather-resistant blended fabric exterior in black or tan. A thick rubber tread on the bottom of the bag prevents wear and protects from small puddles to spilled drinks. The interior has a rigid construction within the frame of the bag for case-like protection and features 20mm thick foam padding, covered with plush micro-fleece lining. An adjustable, removable three-point interior padding system protects the headstock, neck and bottom/end-pin. Gator Cases 4G Series Gig Bags offer fantastic protection at a great price! The lightweight 4G Series gig bag has a dual textured black on black exterior design constructed of rugged Nylon and features padded adjustable backpack style shoulder straps. The gig bags were created with a thick interior padding on all sides and includes extra support at the bottom to protect your guitar or ukulele. Available in ten models to fit electric, bass, classical, acoustic,and mini acoustic guitars including two double versions which hold two electric guitars or two bass guitars. Also available are three sizes of ukulele bags. A large front zippered pocket with flap features G-Hook buckle and seatbelt loops for multiple connection points, allowing you to fill the pocket to capacity and still secure it. A small pocket on the front flap has a soft lining for electronics and provides quick access to phone, keys etc. The Transit gig bags have a molded, padded, contoured handle for a secure yet comfortable grip, padded removable colour matched backpack straps and several D-rings for clipping on accessories. GB-4G-ELECTRIC 4G Style gig bag for electric guitars with adjustable backpack straps GB-4G-ELECTRIC GAT1090 RRP: GB-4G-ACOUELECT 4G Series Double Guitar Bag for Acoustic and Electric Guitar with Adjustable Backpack Straps GT-ACOUSTIC-TAN GB-4G-ACOUELECT Transit Series acoustic guitar gig bag available in charcoal black, grey or tan exterior. GT-ACOUSTIC-TAN GAT1258 GT-ACOUSTIC-BLK GAT1358 GT-ACOUSTIC-GRY GAT1359 GAT1369 GB-4G-ELECX2 4G Style gig bag for 2 electric guitars with adjustable backpack straps GB-4G-ELECX2 GAT1091 RRP: GB-4G-BASS GT-ELECTRIC-BLK Transit Series electric guitar gig bag available in charcoal black, grey or tan exterior 4G Style gig bag for bass guitars with adjustable backpack straps GB-4G-BASS GT-ELECTRIC-BLK GAT1260 GT-ELECTRIC-GRY GAT1362 GB-4G-BASSX2 GT-ELECTRIC-TAN GAT1363 4G Style gig bag for 2 bass guitars GB-4G-BASSX2 GAT1087 RRP: GAT1088 RRP: GT-BASS-BLK Transit Series bass guitar gig bag available in charcoal black, grey or tan exterior. GB-4G-ACOUSTIC GT-BASS-BLK GAT1259 4G Style gig bag for acoustic guitars with adjustable backpack straps GT-BASS-GRY GAT1360 GB-4G-ACOUSTIC GAT-BASS-TAN GAT1361 GAT1086 RRP: GAT1089 RRP: GB-4G-CLASSIC 4G Style gig bag for classical guitars GB-4G-CLASSIC 2

3 GB-4G-UKE CON GBE-MINI-ACOU 4G Series gig bag for concert style ukuleles GB-4G-UKE CON GBE Series lightweight gig bag for mini acoustic guitars GAT1092 RRP: GB-4G-UKE SOP RRP: GBE Series lightweight gig bag for classical guitars GAT1093 RRP: GB-4G-UKE TEN GBE-CLASSIC GAT1096 RRP: TSA ATA Guitar Cases 4G Style gig bag for tenor style ukulele GB-4G-UKE TEN GAT1100 GBE-CLASSIC 4G Style gig bag for soprano style ukulele GB-4G-UKE SOP GBE-MINI-ACOU GAT1094 RRP: GBE Series Economy Gig Bags Gator s GBE Series lightweight gig bags feature nylon construction with 10mm internal padding, reinforced interior at headstock, exterior pocket for accessories, removable and comfortable shoulder strap, adjustable no-slip grip and reinforced handles. Representing exceptional value, they are available in six different sizes. Travel with peace of mind and lock up your guitar before sending through airport security with Gator s TSA Guitar Cases. These cases are ideal for air travel and have been updated with new and improved hardware and TSA approved locking latches. With a military grade molded Polyethylene plastic outer shell, the TSA Guitar Cases provide top notch protection and are significantly lighter than traditional wooden flight cases. The uninterrupted black aluminum valance gives these cases a stealth look and provides additional strength to the overall frame. Surface mounted TSA latches now feature an improved latch housing for impact diversion and sport a sleek black matte finish with red release trigger. These cases have also been updated with a thick black plush interior lining and are available for Standard Electric, Bass, Classical, Acoustic, 335, Les Paul Style, and SG Guitars. GBE-ELECT GTSA-GTRBASS GBE Series lightweight gig bag for electric guitars GBE-ELECT GAT1098 RRP: TSA Series ATA molded polyethylene guitar case for bass guitars GTSA-GTRBASS GAT1262 GBE-AC-BASS GTSA-GTRELEC Economy Gig Bag for Acoustic Bass Guitars GBE-AC-BASS GAT1357 RRP: TSA Series ATA molded polyethylene guitar case for standard electric guitars GTSA-GTRELEC GAT1265 RRP: GBE-UKE-TEN GTSA-GTRDREAD Economy gig bag for tenor style ukuleles GBE-UKE-TEN GAT1335 RRP: TSA Series ATA molded polyethylene guitar case for dreadnaught acoustic guitars GBE-EXTREME-1 GTSA-GTRDREAD GBE Series lightweight gig bag for radically-shaped guitars like the Gibson Flying V GTSA-GTRCLASS GBE-EXTREME-1 GAT1099 RRP: GAT1264 RRP: TSA Series ATA molded polyethylene guitar case for classical style guitars GTSA-GTRCLASS GAT1263 GBE-BASS GTSA-GTRLPS GBE Series lightweight gig bag for bass guitars GBE-BASS GAT1095 RRP: TSA Series ATA molded polyethylene guitar case for Gibson Les Paul GTSA-GTRLPS GAT1266 GBE-DREAD GBE Series lightweight gig bag for acoustic dreadnoughts GBE-DREAD 3 GAT1097 RRP: 20.83

4 GTSA-GTRSG GC-DREAD-12 TSA Series ATA molded polyethylene guitar case for Gibson SG GTSA-GTRSG GAT1267 GTSA-GTR335 GAT1261 GTSA-GTRBASS-LED GAT1411 RRP: GTSA-GTRELEC-LED GAT1113 GAT1105 Deluxe molded case for jumbo acoustic guitars GC-JUMBO Deluxe molded case for bass guitars GC-BASS GC-ELEC-XL TSA Series ATA Molded Polyethylene Guitar Case for Standard Electric Guitars; LED Edition GTSA-GTRELEC-LED GAT1109 GC-BASS TSA Series ATA Molded Polyethylene Guitar Case for Bass Guitars; LED Edition GTSA-GTRBASS-LED GC-DREAD-12 GC-JUMBO TSA Series ATA molded polyethylene guitar case for Gibson 335 GTSA-GTR335 Deluxe molded case for 12-string dreadnought guitars GAT1412 Deluxe molded case for electric guitars; extra long GC-ELEC-XL GAT1110 GAT1111 GC-ELECTRIC-A Deluxe molded case for electric guitars GC Series Molded Guitar Cases Our Deluxe ABS Molded Guitar Cases are perfect for around the town and local gigging. Made of a rugged ABS plastic, the GC series provides hard-shell protection for a variety of guitar styles. Each case includes a heavy-duty aluminum valance and reinforced extra strength carry handle. The interior features a protective EPS foam interior with deep black plush lining to safely secure the guitar and large internal storage compartments for strings, capo, tuner, picks and anything else you need to keep rocking. Lastly, the chrome plated latches can be locked with the included keys to provide an additional level of protection. GC-ELECTRIC-A GC-335 Deluxe molded case for semi-hollow guitars such as Gibson 335 GC-335 GAT1101 GC-LPS Deluxe molded case for single-cutaway electrics such as Gibson Les Paul GC-LPS GAT1114 GC-MANDOLIN Deluxe molded case for both A and F style mandolins GC-MANDOLIN GAT1115 RRP: GC-SG Deluxe Molded Case for Solid-Body Electrics such as Gibson SG GC-SG GAT1116 GC-ELECTRIC-LED Deluxe molded case for electric guitars with interior LED illumination GC-ELECTRIC-LED GC-APX GC-BASS-LED Deluxe molded case for APX-style guitars GC-APX GAT1403 GAT1103 Deluxe molded case for electric bass guitars with interior LED illumination GC-BASS-LED GC-BANJO-XL GAT1402 RRP: Deluxe molded case for banjos GC-BANJO-XL GAT1104 GAT1106 GAT1108 GC-CLASSIC Deluxe molded case for classic guitars GC-CLASSIC GC-DREAD Deluxe molded case for dreadnought guitars GC-DREAD 4

5 Journeyman Series Deluxe Wood Cases Inspired by bluegrass and folk music, these stylish cases are available for a variety of guitar styles. The Journeyman series provides a fresh look with its pebble weaved burlap wrapping and espresso brown trim. Antique brass hardware give each Journeyman case a classic look. A beautiful royal blue crushed velvet lines the interior and provides soft cushioning. An internal accessory storage compartment is perfect for straps, strings, capo, and related accessories. Each Journeyman case is constructed of thick plywood. GW-JM UKE-SOP Deluxe Wood Case for Soprano Style Ukulele; Journeyman Burlap Exterior GW-JM UKE-SOP GAT1317 GW-JM BANJO XL Deluxe Wood Case for Banjo; Journeyman Burlap Exterior GW-JM BANJO XL GAT1309 GW-JM MANDOLIN Deluxe Wood Case for Mandolin; Journeyman Burlap Exterior GW-JM MANDOLIN GAT1314 GW Series Deluxe Wood Cases Gator s stylish Deluxe wood guitar cases are made from a heavy-duty plywood providing hard-shell protection for your valuable instrument. The plush lined foam padded interior keeps your guitar looking brand new and includes ample storage for related accessories such as picks, strings, capo, and more. Each model includes lockable chrome plated latches and an ergonomically designed padded carry handle. Standard models feature thick black Tolex-wrapped exterior with white contrast stitching. Go for a classic look with the distressed leather-like finish of the Vintage Electric Case or the Traditional Brown cases for Gibson guitars featuring the luxurious bright magenta plush interior and guitar cover. Models are available to fit a variety of standard electric, acoustic and bass guitars with custom fit models also available for Gibson Les Paul, SG & 335, Fender Jaguar and Jazzmaster, and an extra wide case perfect for PRS guitars. GW-JM ELEC Deluxe Wood Case for Standard Electric Guitars; Journeyman Burlap Exterior GW-JM ELEC GAT1312 GAT1313 GW-JM LPS Deluxe Wood Case for Les Paul GW-JM LPS GW-JM 335 Deluxe Wood Case for Semi-Hollow Electrics such as Gibson 335 GW-JM 335 GAT1308 RRP: GW-JM RESO Deluxe Wood Case for Resonator Guitars; Journeyman Burlap Exterior GW-JM RESO GAT1315 GW-JM BASS Deluxe Wood Case for Bass Guitars; Journeyman Burlap Exterior GW-JM BASS GAT1310 RRP: GW-ELECTRIC Deluxe Wood Case for Electric Guitars GW-ELECTRIC GAT1304 GW-JM DREAD Deluxe Wood Case for Dreadnaught Acoustics; Journeyman Burlap Exterior GW-JM DREAD GAT1311 RRP: Deluxe Wood Case for Radically-Shaped Guitars Like the Flying V, Explorer, Jackson, BC Rich, & Others GW-EXTREME GW-JM UKE-CON Deluxe Wood Case for Concert Style Ukulele; Journeyman Burlap Exterior GW-JM UKE-CON GW-EXTREME GAT1316 RRP: RRP: GW-ELECT-VIN Deluxe Wood Case for Electric Guitars; Vintage Brown Exterior GW-ELECT-VIN GW-JM UKE-TEN GAT1305 GAT1303 Deluxe Wood Case for Tenor Style Ukulele; Journeyman Burlap Exterior GW-JM UKE-TEN 5 GAT1318

6 GW-LPS Deluxe Wood Case for Single-Cutaway Guitars such as Gibson Les Paul GW-LPS GAT1321 RRP: GW-LP-BROWN Deluxe Wood Case for Single-Cutaway Guitars such as Gibson Les Paul GW-LP-BROWN GAT1320 RRP: GWE Series Economy Wood Cases Our Standard Hard-shell wood guitar cases are a best seller and great when a gig bag just isn t enough. Each case is made from durable plywood and features a Tolex laminated exterior. Cushion your guitar in the thick padded plush lined interior and store picks and strings in the interior storage compartment. Chrome plated hardware compliments the all black exterior and includes lockable latches. Models are available to fit a variety of standard electric, acoustic and bass guitars with custom fit models also available for Gibson Les Paul and 335, Fender Jaguar and Jazzmaster, and an extra wide case perfect for PRS guitars. GW-SG-BROWN Deluxe Wood Case for Solid-Body Guitars such as Gibson SG GW-SG-BROWN GAT1322 GW-335-BROWN Deluxe Wood Case for Semi-Hollow Guitars such as Gibson 335 GW-335-BROWN GAT1299 GW-JAG Deluxe Wood Case for Jaguar, Jagmaster and Jazzmaster Style Guitars GW-JAG GAT1307 GWE-ACOU-3/4 Hard-Shell Wood Case for 3/4-Size Acoustic Guitars GW-BASS GWE-ACOU-3/4 GAT1325 RRP: Deluxe Wood Case for Bass Guitars GW-BASS GAT1300 GWE-335 Hard-Shell Wood Case for Semi-Hollow Guitars such as Gibson 335 GW-DREAD GWE-335 GAT1324 Deluxe Wood Case for Dreadnought Guitars GW-DREAD GAT1302 GWE-LPS-BLK Hard-Shell Wood Case for Single-Cutaway Guitars such as Gibson Les Paul GW-JUMBO GWE-LPS-BLK GAT1332 RRP: Deluxe Wood Case for Jumbo Acoustic Guitars GW-JUMBO GAT1319 GWE-000AC Hard-Shell Wood Case for Martin 000 Acoustic Guitars GW-CLASSIC GWE-000AC GAT1323 Deluxe Wood Case for Classical Guitars GW-CLASSIC GAT1301 RRP: GWE-ELEC-WIDE Hard-Shell Wood Case for PRS and wide body style guitars GWE-ELEC-WIDE GAT1330 GWE-EXTREME Hard-Shell Wood Case for Extreme Guitars Such as Flying V and Explorer GWE-EXTREME GAT1331 GAT1333 GAT1326 GAT1327 GWE-TBIRD-BASS Thunderbird Bass Guitar Wood Case GWE-TBIRD-BASS GWE-BASS Hard-Shell Wood Case for Bass Guitars GWE-BASS GWE-CLASSIC Hard-Shell Wood Case for Classical Guitars GWE-CLASSIC 6

7 GWE-ELEC GL-CLASSIC Hard-Shell Wood Case for Electric Guitars GWE-ELEC Rigid EPS Polyfoam Lightweight Case for Classical Guitars GAT1329 RRP: GWE-DREAD 12 GAT1328 GL-DREAD-12 GAT1152 GL-JUMBO Hard-Shell Wood Case for Concert Style Ukulele GAT1364 Rigid EPS Polyfoam Lightweight Case for Jumbo Acoustic Guitars RRP: GWE-UKE-SOP GL-JUMBO GAT1156 GL-LPS Hard-Shell Wood Case for Soprano Style Ukulele GWE-UKE-SOP RRP: Rigid EPS Polyfoam Lightweight Case for 12-String Dreadnought Guitars RRP: GWE-UKE-CON GWE-UKE-CON GAT1151 GL-DREAD-12 Hard-Shell Wood Case for Dread/12-String Guitars GWE-DREAD 12 GL-CLASSIC GAT1365 RRP: Rigid EPS Polyfoam Lightweight Case for Single Cutaway Electrics such as Gibson Les Paul GL-LPS GAT1158 GWE-UKE-TEN GL-SG Hard-Shell Wood Case for Tenor Style Ukulele GWE-UKE-TEN GAT1366 RRP: Rigid EPS Polyfoam Lightweight Case for Solid-Body Electrics such as Gibson SG GL-SG GL Series Lightweight Polyfoam Guitar Cases The Lightweight Series of guitar cases are the perfect cross between a hard case and gig bag. Each GL series case features a rugged nylon exterior wrapped over a dense EPS foam, keeping the case rigid and tough but lightweight and easy enough to throw over your shoulder. Soft plush lines the inside of the case and the extended neck cradles ensure the guitar is kept secure during use. The Lightweight Series features plenty of additional storage for all your guitar related accessories with internal compartments as well as zippered pockets on the front of the case. Available in eleven unique models to fit a variety of guitar styles, the Lightweight Series is great for everyday use. GAT1161 GL-BASS Rigid EPS Polyfoam Lightweight Case for Bass Guitars GL-BASS GAT1149 RRP: GL-ELECTRIC Rigid EPS Polyfoam Lightweight Case for Electric Guitars GL-ELECTRIC GAT1153 RRP: GL-MANDOLIN Rigid EPS Polyfoam Lightweight Case for Mandolins GL-MANDOLIN GAT1159 RRP: Pedal Boards and Accessories G-TOUR PEDALBOARD-LGW Large rolling flight-style pedal board with case for pedals. Removable 24x11" board surface. Plywood fabricated with aluminium valance. Pro-grade shock absorbing EVA foam interior to protect pedals in transport. 3M Dual Lock fastener which doesn't wear over time for pedal installation. Heavy duty Gator signature hardware. Cable storage included in lower portion of the case. GL-BANJO XL G-TOUR PEDALBOARD-LGW GAT1067 RRP: GAT1413 RRP: Rigid EPS Polyfoam Lightweight Case for Banjos GL-BANJO XL GAT1148 GL-AC-BASS Rigid EPS Polyfoam Lightweight Case for Acoustic Bass Guitars GL-AC-BASS GAT1145 G-TOUR PEDALBOARD-XLGW Extra Large tour grade pedal board and flight case for pedals. Removable 34x 17 pedal board surface and inline wheels GL-APX Rigid EPS Polyfoam Lightweight Case for APX-Type Guitars GL-APX 7 GAT1147 G-TOUR PEDALBOARD-XLGW

8 G-BUS-8-UK Pedal Board Power Supply GPT-PRO Multi-Output Power Supply for Guitar Effects Pedals Built-In Short Circuit Protection with Reset Heavy-Duty Aluminum Housing 4 Holes for Mounting to Any Pedal Board Brass Cylinders Within Mounting Holes Protect Circuitry Eight (8) 9v Outputs and Three (3) 18v Outputs Can Power Up to 11 Standard Stomp Box Pedals Includes Eight (8) 9 Volt 24" Straight End Cables Includes One (1) 18 Volt 24" Straight End Cable G-BUS-8-UK Pedal Board Power Supply 30" x 16" wood pedal board with black nylon carry bag. Plywood pedal board covered in Tolex with velcro front face for attaching pedals (velcro included). Access holes for cables to run below board. Four mounting screws in underside for most multi-output power supplies. Carry case has exterior pocket for cables. Also available with G-BUS-8 power supply with 8 9v and 3 10v outputs included (GPT-PRO-PWR-UK) GAT1414 RRP: G-TOUR PEDALBOARD-SM Small flight-style pedal board with case for 8-10 pedals. Removable 17x11" board surface. Plywood fabricated with aluminium valance. Pro-grade shock absorbing EVA foam interior to protect pedals in transport. 3M Dual Lock fastener which doesn't wear over time for pedal installation. Heavy duty Gator signature hardware. Cable storage included in lower portion of the case. G-TOUR PEDALBOARD-SM GAT1208 GPT-PRO-PWR-UK GAT1209 RRP: GAT1306 RRP: GW-GIGBOXJR GAT1068 RRP: G-MEGA-BONE All-in-one pedal board and 3x guitar stand combo in a classic wooden case " x 15" pedal board in base. Recessed section on pedal board for mounting a power supply. Includes Gator G-BUS power supply. Hook and loop pedal fasteners. Carpet lined interior and black Tolex exterior. Anti-slip rubber feet. Collapsable stand in lid adjusts to hold two electrics and one acoustic or three electric guitars. Black plush lining in stand section. GW-GIGBOXJR Molded Mega pedal board & carry bag. Polyethylene pedal board which can accommodate up to 10 stomp boxes. Ergo-friendly arched shape. Two larger surfaces for wah and volume-type pedals. 9v daisy chain power supply. Hook & loop angled surface for pedal mounting. Heavy-duty padded lightweight carry bag. G-MEGA-BONE GPT-PRO Multi FX Bags GAT1012 GAT1003 G-BONE Protect your stand-alone stompbox and multi-effects units with Gator s durable Multi-FX bags. Made of tough Nylon, these carry bags are designed to safely store and transport multi-effects units such as the Line 6 POD HD or the FX8 from Fractal Audio. Each bag features a ½ thick padded and carpet lined interior to protect from dings, dents, and scratches. The front pocket includes outer mesh storage and large zippered section perfect for cables and power supply. Available in three sizes, the Multi-FX bags include an adjustable shoulder strap and ergo-grip carry handle making sure you ve got all the effects needed for your next gig. Molded pedal board & carry bag. Polyethylene pedal board which can accommodate up to 5 stomp boxes. Ergo-friendly arched shape. One larger surface for wah and volume-type pedals. 9v daisy chain power supply. Hook & loop angled surface for pedal mounting. Convenient carry bag with accessory pocket. G-BONE GPT-BLACK 16.5" x 12" wood pedal board with black nylon carry bag. Plywood pedal board covered in Tolex with velcro front face for attaching pedals (velcro included). Access holes for cables to run below board. Four mounting screws in underside for most multi-output power supplies. Carry case has exterior pocket for cables. Also available with Gator G-BUS-8 power supply included (GPT-BL-PWR-UK) G-MULTIFX-2411 Effects Pedal Bag; 24" X 11" G-MULTIFX-2411 GAT1040 RRP: GAT1039 RRP: GAT1038 RRP: G-MULTIFX-1510 GPT-BLACK GAT1207 RRP: Effects Pedal Bag; 15" X 10" GPT-BL-PWR-UK GAT1206 RRP: G-MULTIFX-1510 G-MULTIFX-1110 Effects Pedal Bag; 11" X 10" G-MULTIFX

9 Amp Cases G-TOURMINIHEAD2 ATA wood flight case for medium 'lunchbox' style amplifier heads. Heavy duty plywood construction with laminated exterior. Adjustable interior to fit. EVA-Dur interior protection. Heavy duty Gator signature hardware. Internal dimensions 7.5" x 10" x 10". G-112A Wooden case & stand with wheels & tow handle for 1x12 combo amps. Reinforced hard top for supporting amplifier on stage. Rails to prevent amp from vibrating off the case during performance. Rigged nylon material over 1/2" wood frame. 20mm foam interior covered in Tricot. External accessory pocket. G-TOURMINIHEAD2 GAT1078 RRP: GAT1079 RRP: GAT1352 G-TOURMINIHEAD3 G-112A GAT1001 G-212A G-TOURMINIHEAD3 Wooden case & stand with wheels & tow handle for 2x12 combo amps. Reinforced hard top for supporting amplifier on stage. Rails to prevent amp from vibrating off the case during performance. Rigged nylon material over 1/2" wood frame. 20mm foam interior covered in Tricot. External accessory pocket. G-212A ATA wood flight case for large 'lunchbox' style amplifier heads. Heavy duty plywood construction with laminated exterior. Adjustable interior to fit. EVA-Dur interior protection. Heavy duty Gator signature hardware. Internal dimensions 22" x 12" x 12". G-901 Wooden case with wheels and tow handle for full size amp heads. Ballistic nylon exterior over wood frame. 20mm foam interior covered in Tricot. Storage pocket for pedal controllers and channel switching pedals. Wed side carry handles. Interior dimensions 30" x 12.5" x 10.5". GAT1002 RRP: G-TOUR CAB412 G-901 ATA Tour case for 4 x 12 guitar speaker cabinet with live-in design and rear access door. Adjustable fit case for most 4 x 12 speaker cabinets. 3/8" plywood construction. Ultra-Dur EVA interior padding. Front lid 'stay-in-case' design with hinged rear access. Rear cable port. Heavy duty hardware. 4 casters. G-TOUR CAB412 Keyboard GAT1063 RRP: GAT1064 RRP: GAT1077 RRP: G-TOUR HEAD G-Tour ATA series case fits most full-sized guitar amp heads like the Marshall JCM Series. Lift-off lid design. Upper lid section includes removable foam blocks that secure and accommodate a variety of amps. 3/8" plywood construction. Heavy duty hardware. G-TOUR HEAD G-TOURMINIHEAD1 ATA wood flight case for small 'lunchbox' style amplifier heads. Heavy duty plywood construction with laminated exterior. Adjustable interior to fit. EVA-Dur interior protection. Heavy duty Gator signature hardware. Internal dimensions 13" x 7" x 7.5". G-TOURMINIHEAD1 9

10 Pro-Go Ultimate Keyboard Gig Bags Gator Cases deluxe PRO-GO Series Keyboard bags provide professional level protection for players on the go. These sleek and stylish gig bags are built tough featuring an extremely durable nylon exterior and ultra-thick padded sidewalls. On the interior, your keyboard is cushioned in a luxurious, thick, white micro-fleece lining. Additionally, micro-fleece padded straps help to secure the board during transport. Each PRO-GO Keyboard bag includes an extra-large front pocket with storage compartments for cables, foot pedal, and other related accessories. The pocket even includes storage for tablet devices with a micro-fleece lining. A reinforced padded carry handle and removable backpack straps provide convenient carry options. Lastly, a slight change in weather is nothing to fear as a zippered compartment stores a stylish protective rain cover that wraps around the exterior to keep everything dry. G-PG-61SLIM ProGo series slim 61note keyboard bag G-PG-61SLIM GAT1051 RRP: GK-Micro Keyboard Gig Bags Lightweight protection for micro controllers. Padded and soft-lined interior, inside a tough Nylon exterior. Large exterior pocket for cables and accessories. Shoulder straps included. GK-2110 Gig bag for micro controllers. 22.5" X 11.5" X 4". GK-2110 GAT1121 RRP: GK-1610 Gig Bag for Micro Keyboards and Controllers; 16 X 10 X 3 GK-1610 GAT1370 RRP: GKB Series Keyboard Gig Bags Keep your keyboard safe with Gator s padded keyboard gig bags. This heavy-duty rugged Nylon carry bag features a soft padded interior and adjustable padded straps to secure and protect your keyboard. A large zippered front pocket is perfect for holding sheet music, footswitch and more. The reinforced comfort grip carry handles make it easy to take your keyboard wherever it needs to go. Available for sizes ranging from 49 note to 88 note keyboards including slim models. G-PG-61 ProGo series 61note keyboard bag. G-PG-61 GAT1050 RRP: GAT1052 RRP: G-PG-76 ProGo series 76note keyboard bag G-PG-76 GK-2110 G-PG-76SLIM Gig bag for micro controllers. 22.5" X 11.5" X 4". ProGo series Slim 76note keyboard bag G-PG-76SLIM GK-2110 GAT1053 GAT1056 GKB-49 RRP: Gig Bag for 61 Note Keyboards GKB-61 GAT1054 RRP: GKB-61 SLIM G-PG-49 Keyboard Gig Bag to fit Most Slim Model 61 Note Keyboards. Internal dims 41.5" x 12.5" x 5" ProGo series 49note keyboard bag GAT1049 RRP: G-PG-88SLIM GKB-61 SLIM GAT1132 GAT1133 RRP: GKB-76 ProGo series slim 88note keyboard bag 10 GAT1131 GKB-61 ProGo series 88note keyboard bag G-PG-88SLIM RRP: RRP: G-PG-88 G-PG-49 GAT1130 Gig Bag for 49 Note Keyboards ProGo series slim extra long 88note keyboard bag G-PG-88 RRP: GKB-49 G-PG-88SLIMXL G-PG-88SLIMXL GAT1121 RRP: Gig Bag for 76 Note Keyboards GAT1055 RRP: GKB-76

11 GKB-76 SLIM Keyboard Gig Bag to fit Most Slim Model 76 Note Keyboards. Internal dims 51" x 12.5" x 5" GKB-76 SLIM GAT1134 GAT1135 RRP: GKB-88 Gig Bag for 88 Note Keyboards GKB-88 ATA Tour Style Keyboard Cases Gator s line of G-TOUR Keyboard Cases offer unmatched protection for a variety of high-end keyboards. Each case features a thick plywood construction with laminated exterior, sleek aluminum valance and heavy-duty commercial grade hardware. The EVA foam padded interior helps protect from dings and dents while the unique fit system adjusts to ensure your keyboard is safe and secure during transport. Recessed wheels and spring loaded handles allow you to carry or roll your keyboard straight to the venue or safely store in your trailer or tour bus. GKB-88 SLIM Gig Bag for 88 Note Keyboards; Reduced Depth GKB-88 SLIM GAT1136 RRP: GKB-88 SLXL Gig Bag for Slim, Extra long 88 Note Keyboards GKB-88 SLXL GAT1137 GKBE Series Economy Keyboard Gig Bags Gator s Economy Keyboard Bags provide simple storage for entry level portable keyboards. Quickly slide your keyboard into the envelope style Nylon bag with a soft padded interior. The bag includes Nylon carry handles for an easy tote. Available in models for 61, 76, and 88 note keyboards. G-TOUR-88V2SL ATA Wood Flight Case to fit Most Slim 88 Note Keyboards G-TOUR-88V2SL GAT1071 RRP: GKBE-61 Economy Gig Bag for 61 Note Keyboards GKBE-61 GAT1140 RRP: GAT1141 RRP: GAT1142 RRP: GKBE-76 Economy Gig Bag for 76 Note Keyboards GKBE-76 GKBE-88 Economy Gig Bag for 88 Note Keyboards GKBE-88 11

12 TSA ATA Keyboard Cases GTSA-KEY49 Gator s TSA Keyboard cases are ideal for air travel and have been updated with new and improved hardware and TSA approved locking latches. With a military grade molded polyethylene plastic outer shell, the TSA Keyboard Cases provide top notch protection and are significantly lighter than traditional wooden flight cases. The uninterrupted black aluminum valance not only gives these cases a stealth look, but provide additional strength to the overall frame. Surface mounted TSA latches feature an improved latch housing for impact diversion and sport a sleek black matte finish with red release trigger. The case interior features an adjustable wedge block system and additional foam blocks in the lid ensure the best possible fit for almost any keyboard. Spring loaded handles and recessed wheels (wheels not included on 49-note model). Available for sizes ranging from 49 note to 88 note keyboards including slim models. TSA Series ATA Molded Polyethylene Keyboard Case for 49-note Keyboards GTSA-KEY49 GAT1268 RRP: Lightweight Keyboard Cases Gator Cases Lightweight Series keyboard cases blend the durability of a hard case with the light weight of a soft bag. Each case features a rugged Nylon outer shell with a large zippered pocket providing plenty of storage for cables and accessories. The interior is lined with a carpet lined soft foam and includes padded security straps to fully protect your keyboard from unwanted scratches and dents during transport. Taking your keyboard to a gig is no problem with the smooth glide wheels and tow handle. The Lightweight Keyboard Cases are available for sizes ranging from 49 note to 88 note keyboards including slim models. GK-49 Rigid EPS Foam Lightweight Case w/ Wheels for 49 Note Keyboards GTSA-KEY88SLXL TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for Slim Extra Long 88-note Keyboards GTSA-KEY88SLXL GAT1275 RRP: GK-49 GAT1122 GK-61 Rigid EPS Foam Lightweight Case w/ Wheels for 61 Note Keyboards GTSA-KEY88 GK-61 GAT1123 RRP: TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for 88-note Keyboards GK-61-SLIM GTSA-KEY88 Rigid EPS Foam Lightweight Case w/ Wheels for Slim 61 Note Keyboards GAT1272 RRP: GK-61-SLIM GAT1124 RRP: GTSA-KEY88SL TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for Slim 88-note Keyboards GTSA-KEY88SL GAT1274 RRP: GTSA-KEY76D GAT1271 RRP: GK-76 GAT1125 RRP: Rigid EPS Foam Lightweight Case w/ Wheels for Slim 76 Note Keyboards GK-76-SLIM GAT1126 RRP: GK-88 GTSA-KEY76 TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for 76-note Keyboards GTSA-KEY76 Rigid EPS Foam Lightweight Case w/ Wheels for 76 Note Keyboards GK-76-SLIM TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for Extra Deep 76-note Keyboards GTSA-KEY76D GK-76 GAT1270 Rigid EPS Foam Lightweight Case w/ Wheels for 88 Note Keyboards GK-88 GAT1127 RRP: RRP: GK-88 SLIM GTSA-KEY61 TSA Series ATA Molded Polyethylene Keyboard Case with Wheels for 61-note Keyboards GTSA-KEY61 GAT1269 Rigid EPS Foam Lightweight Case w/ Wheels for 88 Note Keyboards; Reduced Depth GK-88 SLIM GAT1128 RRP: RRP: GK-88 SLXL Rigid Lightweight Case w/ Wheels for Slim, Extra long 88 Note Keyboards GK-88 SLXL 12 GAT1129 RRP:

13 Keyboard Covers GL-OBOE-A Stretchy keyboard covers provide a quick and easy way to protect your keyboard at home or in the studio. The sleek black Lycra/Spandex material stretches around your keyboard to protect it from dust dirt and the occasional spill. The adjustable shock cord helps to tighten the cover around your keyboard. Available in two sizes to fit note keyboards and 88 note keyboards. Rigid EPS Polyfoam Lightweight Case for Oboe GL-OBOE-A GAT1160 RRP: GL-ALTOSAX-MPC Lightweight Polyfoam Alto Sax Case with storage for mouthpiece and other accessories GL-ALTOSAX-MPC GAT1146 GL-TENOR-SAX-A Rigid EPS Polyfoam Lightweight Case for Tenor Sax GL-TENOR-SAX-A GAT1162 RRP: GL-TROMBONE-F Lightweight Polyfoam Trombone Case with internal accomodation for F-attachment. GKC-1540 Stretchy Cover Fits 61-Note & 76-Note Keyboards GKC-1540 GAT1143 GL-TROMBONE-F GAT1163 RRP: RRP: GL-TRUMPET-A GKC-1648 Rigid EPS Polyfoam Lightweight Case for Trumpet Stretchy Cover Fits 88-Note Keyboards GKC-1648 GL-TRUMPET-A GAT1144 GAT1164 RRP: RRP: GL-TRUMPET-MUTE Rigid EPS Polyfoam Lightweight Case for Trumpet with Mute Storage Band and Orchestra Lightweight Polyfoam Band & Orchestra Cases Gator s Lightweight Cases combine the protection of a case with the minimal weight of a bag. The exterior is constructed of rugged, stylish Nylon with an easy to wipe clean surface. The inside of the case is dense, molded EPS foam covered in black plush to keep your instrument safe and secure. All of the Lightweight Series includes large exterior storage pockets for reeds, mouthpieces, maintenance kits, cleaning supplies and other accessories. Select models also include internal mouthpiece and/or mute storage. Gator s Lightweight Cases offer several carry options including the signature interlocking comfort-grip handle and the included adjustable, removable shoulder strap with a no-slip rubber pad. The Gator Lightweight Series is the perfect solution for everyone from the student to the band and orchestra professional. GL-CLARINET-A GAT1150 RRP: GL-FLUTE-A Gator s molded series band cases blend traditional style with Gator-level protection. Made from deluxe molded ABS plastic, each band case features a heavy-duty aluminium valance, reinforced extra-strength carry handle and sleek triple chrome plated hardware. The plush-lined, form fitted EPS interior nest safely stores and protects the instrument while locking latches keep everything secure. Gator's Molded Band Cases are available for a variety of instruments including brass, woodwind, and violin. Deluxe Molded Case for Trumpets GAT1118 RRP: GAT1117 GC-TENOR SAX Rigid EPS Polyfoam Lightweight Case for Flute GAT1154 RRP: Deluxe Molded Case for Tenor Saxophones GC-TENOR SAX 13 Molded Band & Orchestra Cases GC-TRUMPET GL-FLUTE-A GAT1165 GC-TRUMPET Rigid EPS Polyfoam Lightweight Case for Clarinet GL-CLARINET-A GL-TRUMPET-MUTE

14 GC-ALTO SAX DJ Controller Cases with Laptop Platform Deluxe Molded Case for Alto Saxophones GC-ALTO SAX GAT1102 RRP: GAT1119 G-TOURDSPDDJSXRX GC-VIOLIN 4/4 Deluxe Molded Case for Full Size Violins GC-VIOLIN 4/4 DJ G-Club series DJ Bags The G-Club Controller series of backpack and messenger style bags offers the ideal solution to safely transport your DJ controller or midi keyboard wherever you are playing. All of the Controller series bags feature a bright orange interior to help with visibility of the contents in the club, venue or dark room. Messenger style bags include a dedicated zippered headphone pocket, while the Backpack features numerous storage compartments. Both models include a padded removable shoulder strap and reinforced carry handle making sure these bags never let you down. G-CLUB-CONTROL-27BP G-TOURDSPDDJSXRX G-Club series backpack with adjustable interior for DJ controllers up to 27" length including the Pioneer DDJ-SX and SX2. G-CLUB-CONTROL-27BP GAT1072 RRP: EVA DJ Controller Cases GAT1005 RRP: G-CLUB CONTROL 25 Large Messenger bag for DJ style Midi controller G-CLUB CONTROL 25 G-TOUR road case with sliding laptop platform, custom fit for Pioneer DDJ-RX/SX/SX2 controller. Tour-style plywood construction and road tough commercial-grade recessed handles and twist latches make this case the best solution for your DJ equipment. Removable front panel that allows easy access to headphone jacks and ultra-durable EVA interior padding. Integrated cable ports for easy power and signal routing ensure setting up is quick and easy. GAT1342 GAT1336 GAT1006 RRP: Gator Cases new series of lightweight EVA molded cases are designed to fit the most popular DJ controllers on the market. Offered in 4 sizes, the GU-EVA series will provide simple and secure storage for the Pioneer DDJ series, Native Instruments Traktor Kontrol, Numark NS7II and many others. Each case features a lightweight, rigid EVA molded frame to protect from unwanted dings and dents during transport. The zippered interior compartment is lined with convoluted foam providing a soft cushioning for your controller. In addition to the Nylon reinforced top carry handles, a convenient adjustable shoulder strap is also included. The GU-EVA series sports a classy look with an all-black exterior and small rubberized gator logo. G-CLUB CONTROL Messenger bag for DJ style Midi controller G-CLUB CONTROL G-CLUB-HEADPHONE G-Club series carry case for DJ style headphones and accessories. Front panel storage compartment for headphone/usb cables, flash storage, smart phone, cards and more. USB grommet on front of bag for running power cables to devices inside. G-CLUB-HEADPHONE GU-EVA Lightweight molded EVA case for DJ controllers and related equipment. 18"x13"x3". Fits NI Tractor Kontrol S2, Pioneer DDJ-WeGo3, Akai APC40 and many more. GU-EVA GAT1295 RRP: 58.33

15 GU-EVA Lightweight molded EVA case for DJ controllers and related equipment. 35"x19"x3". Fits Pioneer DDJ-SZ, Pioneer DDJ-RZ, Numark NS711, Numark NS7 FX and many more. GU-EVA GAT1298 GU-EVA Padded Drum Bags Made of a durable high denier Nylon, these bags protect each drum with a 10mm padding and finish-friendly lined interior. Single models are available in a variety of sizes for kick, tom, and snare drums as well as pre-pack sets making it easy to match up your entire kit. Transport your drums safely using the heavy-duty Nylon carry straps and store conveniently with the collapsible design. Lightweight molded EVA case for DJ controllers and related equipment. Internal dimensions 28"x16"x4". Fits Numark Mixdeck Quad and more. GU-EVA GAT1297 GU-EVA Lightweight molded EVA casea for DJ controllers and related Equipment. Internal dimensions 23"x14"x3". Fits Pioneer DDJ-SR, Pioneer DDJ-SB2, Numark NV and many more. GU-EVA GAT1296 RRP: Protechtor Percussion Pro-Go Ultimate Percussion Gig Bags G-PG-SNRBAKPAK Pro-Go series snare drum bag with micro fleece interior and removable backpack straps. The Pro-Go Series features an extremely durable Nylon exterior and ultra-thick padded sidewalls to ensure the best protection. The interior of the snare bag cushions the drum in a luxurious, thick, white micro-fleece lining and includes two small, padded, fleece-covered wedges to utilize on the bottom of the bag for extra protection when you set your snare drum down. A wrap-around protective rain cover is built-into the bag. The unique padded backpack system is adjustable and completely removable making it a perfect companion for the travelling musician. G-PG-SNRBAKPAK GP-STANDARD-100 Standard drum bag set. 22"x18" kick, 12"x 10", 13"x11" & 16"x16" tom, 14"x5.5" snare. GP-STANDARD-100 GAT1190 RRP: GP-FUSION-100 Fusion drum set bags: 22" x 18" kick, 10" x 9", 12" x 10" and 14" x 12" tom, 14" x 5.5" snare. GAT1058 RRP: GP-FUSION-100 GAT1184 RRP: GAT1175 RRP: GAT1176 RRP: GP SD Standard series padded snare bag; 14" x 5.5" GP SD GP SD Standard series padded snare bag; 14" x 6.5" GP SD 15

16 Cymbal Cases and Bags GP-HDWE-1436-PE Heavy-Duty padded cymbal backpacks, old up to six 22" or 24" cymbals. Large front pocket to hold a loaded stick bag. Ultra-padded adjustable backpack straps. Three additional storage pockets. Removable padded shoulder strap and wrap padded handle. Heavily padded back section. PVC lined divided interior with reinforced bottom. Drum hardware bag, 14" x 36" with wheels and molded reinforced bottom. GP-HDWE-1436-PE GAT1187 GAT1188 GP-HDWE-1436W Drum hardware bag, 14" x 36" with wheels GP-HDWE-1436W GP-HDWE-1846-PE Drum hardware bag, 18" x 46" with wheels and molded reinforced bottom. GP-HDWE-1846-PE GAT1189 RRP: GAT1179 RRP: Stick Bags GP-ART-007 Artist Series stick and mallet bag with G-FLEX protection and synthetic wool liner. GP-CYMBAK-22 Heavy Duty padded back pack to hold up to six 22 inch cymbals w/ pocket for stick bag. GP-CYMBAK-22 GAT1181 GP-CYMBAK-24 Heavy Duty padded back pack to hold up to six 24 inch cymbals w/ pocket for stick bag. GP-CYMBAK-24 GAT1182 GP-ART-007 World Percussion Cases and Bags GP-CONGA-W Drum Accessory Bags Gator percussion hardware bags feature durable 600-denier nylon construction, #10 zippers, reinforced carry handles and synthetic fur-lined interior. Rolling versions feature wheels and tow handle with solid bottom for support. PE versions have a rigid polyethylene base, recessed roller wheels and padded interior hook and loop tie down straps. GP-DRUMCART Drum hardware and utility bag with 25mm steel frame and in-line wheels. 45kg (100lb) capacity. Removable rolling cart. Ample exterior pockets for accessories. As well as drum hardware, the GP-DRUMCART is also suited for storing and transporting microphone stands. Padded conga bag with adjustable strap and wheels. Durable 600-denier nylon construction. Padded interior with reinforced bottom. Comfortable carrying straps and shoulder straps. Adjustable interior strap helps to fit many different sizes. Wheels and drag handle for easy transport. GP-CONGA-W GAT1180 RRP: Audio/Video Speaker GP-DRUMCART GAT1183 GAT1185 RRP: GAT1186 RRP: GP-HDWE-1350 Drum hardware bag. 13" x 50" GP-HDWE-1350 GP-HDWE-1436 Drum hardware bag, 14" x 36" GP-HDWE

17 Speaker Bags Tote Speaker Bags Designed to fit most popular molded speaker cabinets. Bottom of bag has structured foam to cradle the speaker. Durable pull-out handle and six wheel assembly (Not included on GPA-E15 or GPA ). Rugged Nylon construction with 10mm side foam. Two accessory pockets and a large side pocket. Dual zipper design for easy loading. Heavy-Duty, eightweight speaker tote bags. Rugged water resistant polyester construction. Protective, padded interior with soft lining. Heavy-duty dual zipper design opens entire top of bag for easy loading and unloading. Secure-wrap, reinforced dual handles and straps distribute weight of the speaker and reduce wear on the bag. Ample storage with large exterior pocket for cables and accessories. GPA-TOTE15 Heavy-Duty Speaker Tote Bag for Compact 15" Cabinets GPA-TOTE15 GAT1200 GPA-715 GPA-TOTE12 Rolling speaker bag for most 15" speakers including Mackie TH-15A, Behringer EUROLIVE B315A and EUROLIVE B215A, EV ELX115P, And JBL EON305, 315, 515XT and EON615 Heavy-Duty Speaker Tote Bag for Compact 12" Cabinets GPA-715 GPA-TOTE10 GAT1193 GPA-TOTE12 GAT1199 RRP: RRP: Heavy-Duty Speaker Tote Bag for Compact 10" Cabinets GPA-712LG GPA-TOTE10 GAT1198 Rolling speaker bag for large format 12" speakers including Mackie SRM450v2, JBL MRX512MM, Yamaha MSR400, Peavey Impulse 12D, EV ELX112P, Behringer EUROLIVE B412DSP and Harbinger ASP12 GPA-TOTE8 GPA-712LG Heavy-Duty Speaker Tote Bag for Compact 8" Cabinets GAT1191 RRP: GPA-TOTE8 GAT1201 RRP: RRP: GPA-712SM Rolling speaker bag for small format 12" speakers including QSC K12, Mackie TH-12A, JBL PRX612M, JRX112M, and SRX712M, and Behringer B2120 GPA-712SM 17 GAT1192 RRP: 95.00

18 Speaker Case GPA-SPKSTDBG-50 PA system cases for small or Large "Passport" type PA systems. Hybrid lightweight wood and nylon construction. Wheels and retractable handle. Removable internal divider for Yamaha-style PA. Large external pocket. Reinforced web handle. Single compartment speaker stand bag with 50" interior. Holds 2 stands (Formerly GPA-50) GPA-SPKSTDBG-50 GAT1194 RRP: GPA-SPKSTDBG-58DLX Dual compartment speaker stand bag with 58 inch interior. Holds 2 stands (Formerly GPA-88) GPA-SPKSTDBG-58DLX G-PA TRANSPORT-LG Case for larger 'passport' type PA systems. Fits Passport 300 & 500, Fender Passport Venue, Behringer EPA300, Yamaha Stagepas 250M, Stagepas 500, Stagepas 600i G-PA TRANSPORT-LG GAT1041 RRP: GAT1195 RRP: Mixer Standard Mixer Cases Nearly indestructible lightweight polyethylene construction mixer cases. Angled pad with hook and loop wedge to hold mixer securely. Tricot-lined foam interior and rubber feet. Completely removable lids with breakaway hinges. G-PA TRANSPORT-SM Case for smaller "passport" type PA systems. Fits Passport 150, Samson XP308i, Yamaha Stagepas 150M, Stagepas 300, Stagepas 400i. G-PA TRANSPORT-SM GAT1042 Speaker Stand Bags and Covers GPA-STAND-2-B Stretchy cover to cover two base sides of most tripod style speaker stands. Gives a clean, professional look for DJ, corporate, or worship applications. Acoustically translucent material. Machine washable. Zippered carry pouch included. Available in white or black G-MIX 12X24 GPA-STAND-2-B GAT1196 RRP: GPA-STAND-2-W GAT1197 RRP: Molded PE Mixer or Equipment Case; 12" X 24" X 4.25"; w/ Wheels G-MIX 12X24 GAT1014 RRP: G-MIX 17X18 GPA-SPKSTDBG-50DLX Molded PE Mixer or Equipment Case; 17" X 18" X 6.5" Dual Compartment Speaker Stand Bag with 50 inch interior. Holds 2 speaker stands G-MIX 17X18 GAT1015 RRP: G-MIX 19X21 GPA-SPKSTDBG-50DLX GAT1351 RRP: Molded PE Mixer or Equipment Case; 19" X 21" X 6.5"; w/ Wheels G-MIX 19X21 GAT1016 RRP: GPA-SPKRSPBG-42DLX Dual Compartment Speaker Sub Pole Bag with 42 interior. Holds 2 Speaker Subwoofer Poles GPA-SPKRSPBG-42DLX 18 GAT1379 RRP: 19.16

19 G-MIX 20X25 G-MIXERBAG-1212 Molded PE Mixer or Equipment Case; 20" X 25" X 8"; w/ Wheels G-MIX 20X25 GAT1017 RRP: G-MIX 20X30 G-MIXERBAG-1212 GAT1027 RRP: G-MIXERBAG-1306 Molded PE Mixer or Equipment Case; 20" X 30" X 6"; w/ Wheels G-MIX 20X30 Updated Padded Nylon Mixer Or Equipment Bag; 12" X 12" X 5.5" GAT1018 RRP: Padded Nylon Bag Custom Fit for the Behringer X-AIR series Mixers; 13.1" X 6.25" X 6" G-MIXERBAG-1306 GAT1028 RRP: G-MIX 22X46 Molded PE Mixer or Equipment Case; 22" X 46" X 6.5"; w/ Wheels G-MIXERBAG-1515 G-MIX 22X46 Updated Padded Nylon Mixer Or Equipment Bag; 15" X 15" X 5.5" GAT1019 RRP: G-MIXERBAG-1515 GAT1029 RRP: G-MIX 24X36 Molded PE Mixer or Equipment Case; 24" X 36" X 6.5"; w/ Wheels G-MIXERBAG-1815 G-MIX 24X36 Updated Padded Nylon Mixer Or Equipment Bag; 18" X 15" X 6.5" GAT1020 RRP: G-MIXERBAG-1815 GAT1030 RRP: G-MIX-12 PU G-MIXERBAG U ATA Molded Pop-Up Mixer Case w/ Wheels. Patented Pop-Up ratchet system for transporting the mixer flat then elevating to various angles in the field. High density polyethylene shell, threaded rack rails, spring loaded twist latches, chrome-plated corners, pull-out handle, recessed wheels and spring-loaded handles. G-MIX-12 PU Updated Padded Nylon Mixer Or Equipment Bag; 18" X 18" X 5.5" G-MIXERBAG-1818 GAT1031 RRP: G-MIXERBAG-2020 Updated Padded Nylon Mixer Or Equipment Bag; 20" X 20" X 5.5" GAT1021 RRP: G-MIXERBAG-2020 GAT1032 RRP: G-MIXERBAG-2118 Mixer Bags Updated Padded Nylon Mixer Or Equipment Bag; 21" X 18" X 7" The sleek and stylish G-MIXERBAG series provides storage for mixers and various DJ equipment. The all-black Nylon exterior is highlighted with Gator red accents and zipper pulls. The thick padded interior is carpet lined to keep your gear looking brand new. A large zippered front pocket is perfect for cables, power supplies, and include cable management straps. Throw this bag over your shoulder with the adjustable strap and never leave home without the gear you need. Available in ten different sizes ranging from 9 x 9 up to 25 x 19. G-MIXERBAG-2118 GAT1033 RRP: G-MIXERBAG-2123 Updated Padded Nylon Mixer Or Equipment Bag; 21" X 23" X 6" G-MIXERBAG-2123 GAT1034 RRP: G-MIXERBAG-2519 Updated Padded Nylon Mixer Or Equipment Bag; 25" X 19" X 8" G-MIXERBAG-2519 GAT1035 RRP: GAT1372 RRP: GAT1373 G-MIXERBAG-2621 Padded Nylon Carry Bag for Large Format Mixers; 26 X 21 X 8.5 G-MIXERBAG-2621 G-MIXERBAG-3121 Padded Nylon Carry Bag for Large Format Mixers; 31 X 21 X 7 G-MIXERBAG-0909 Updated Padded Nylon Mixer Or Equipment Bag; 9" X 9" X 2.75" G-MIXERBAG-0909 GAT1026 RRP: G-MIXERBAG

20 G-MIXERBAG-3621 GTSA-MIX Padded Nylon Carry Bag for Large Format Mixers; 36 X 21 X 8 TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 22"x25"x8" GTSA-MIX GAT1289 RRP: GTSA-MIX TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 20"x30"x8" G-MIXERBAG-3621 GAT1374 GTSA-MIX GAT1287 RRP: GTSA-MIX Mixer Cases with TSA Latches TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 19"x21"x6" Newly upgraded series of mixer cases with TSA locking latches. Black uninterrupted valance design. Built-in inner mixer secure fit system. TSA locking latches with impact diversion dishes. 1 interior EPS foam protection. Comfortable ergo-grip handles GTSA-MIX GAT1284 RRP: GTSA-MIX TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 20"x30"x6" GTSA-MIX GAT1286 RRP: Lightweight Polyfoam Mixer Cases Rugged nylon exterior with padded tricot lining. Constructed of heavy-duty EPS foam. Detachable padded shoulder strap, padded reinforced handles and exterior accessory pocket. GTSA-MIX12PU Uses the patented Pop-Up ratchet system for transporting your mixer flat then elevating to various angles for a quick setup. High density polyethylene shell, TSA locking latches, threaded rack rails, black uninterrupted valance design, and comfort ergo-grip handles. GTSA-MIX12PU G-MIX-L 1618A Rigid EPS Polyfoam Lightweight Mixer Case; 16.5" X 19" X 6" G-MIX-L 1618A GAT1022 RRP: G-MIX-L 1622 GAT1282 RRP: Rigid EPS Polyfoam Lightweight Mixer Case; 16" X 22" X 5" G-MIX-L 1622 GTSA-MIX GAT1023 RRP: G-MIX-L 1822 TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 19"x21"x8" GTSA-MIX GAT1285 RRP: Rigid EPS Polyfoam Lightweight Mixer Case; 18" X 22" X 7" G-MIX-L 1822 GTSA-MIX GAT1024 RRP: G-MIX-L 1926 TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 22"x25"x6" GTSA-MIX GAT1288 RRP: Rigid EPS Polyfoam Lightweight Mixer Case; 19" X 26" X 6" G-MIX-L 1926 GAT1025 GTSA-MIX TSA Series ATA Molded Polyethylene Mixer or Equipment Case; 18"x18"x6" GTSA-MIX GAT1283 RRP:

21 Mixer Wood Flight Cases Mixer/Recording Gear Covers Thick 1/2" plywood construction with laminated exterior. Custom fit interior. Doghouse design for easy multi-pin snake connection (not included on G-TOUR-SIEXP-16 or G-TOUR X32CMPCTW). EVA interior padding. Red recessed twist latches and spring-loaded rubber-gripped handles. Heavy-duty commercial-grade hardware. Upright transport design with four heavy duty casters (two locking). G-TOUR X32CMPCTW & G-TOUR-SIEXP-16 includes tow-handle and two recessed wheels. GMC-2222 Perfect for mixers, digital recording workstations and other gear. Constructed of stretchy lycra. Adjustable cord assures snug fit. Keeps dust off of equipment when not in use. Hand washable. GMC-2222 GAT1174 RRP: GAT1166 RRP: GAT1170 RRP: GAT1173 RRP: GAT1065 RRP: Microphone Wired Mic Cases GM-12B Padded bag for up to 12 microphones. Durable nylon construction. Exterior pocket for cables and accessories. Padded shoulder strap for easy transport. G-TOUR M32 ATA Wood Flight Case for Midas M32. G-TOUR M32 GAT1066 RRP: G-TOUR X32 GM-4 ATA wood flight case for Behringer X-32. G-TOUR X32 GM-12B GAT1069 RRP: G-TOUR X32CMPCTW Padded bag for up to four microphones. Durable nylon construction. Exterior pocket for cables and accessories. Padded shoulder strap for easy transport. ATA wood flight case for Behringer X-32 Compact. G-TOUR X32CMPCTW GAT1070 RRP: GAT1084 RRP: G-TOURYAMTF5 ATA wood flight case for Yamaha TF5. G-TOURYAMTF5 GM-4 GM-6-PE G-TOUR-SIEXP-16 Road case for Soundcraft Si Expression 1 mixers. Wheels and tow-handle. G-TOUR-SIEXP-16 GAT1343 RRP: ATA molded 6-slot microphone briefcase. Lightweight polyethylene construction. Triple chrome plated locking latches. G-TOUR-SIEXP-24 Road case for Soundcraft Si Expression 2 mixers, with doghouse and casters. G-TOUR-SIEXP-24 GAT1344 RRP: GM-6-PE G-TOUR-SIEXP-32 Road case for Soundcraft Si Expression 3 mixers, with doghouse and casters. G-TOUR M15 G-TOUR-SIEXP-32 ATA wood flight case with 15 foam padded microphone drops and a large storage space for accessories. Red recessed twist latches, spring-loaded rubber-gripped handles, thick plywood construction and heavy-duty hardware. GAT1345 RRP: G-TOUR M15 21

22 GTSA-MIC15 GM-4WR TSA series ATA molded polyethylene case with foam drops for up to 15 wired microphones. Lightweight polyethylene construction. TSA locking latches. Black uninterrupted valance GTSA-MIC15 Polyethylene case holds four half-width wireless systems. Double sided tape included. Convoluted foam lid and reinforced chrome corners. Recessed chrome twist latches and top mounted carry handle. Carpet lined interior and accessory pocket. GAT1278 GTSA-MIC30 GM-4WR TSA series ATA molded polyethylene case with foam drops for up to 30 wired microphones. Lightweight polyethylene construction. TSA locking latches. Black uninterrupted valance GTSA-MIC30 GAT1171 RRP: GAT1172 RRP: GAT1281 GAT1280 GAT1007 RRP: GM-5W Padded bag for 5 wireless mic systems. Durable rugged nylon exterior with shoulder strap. Large storage compartment for receivers and accessories. GAT1279 RRP: GM-5W GX-33 GTSA-MICW7 Padded Bag for 5 Mics, 3 Stands and Cables - 43" x 8" x 8" GX-33 GAT1346 RRP: TSA series ATA molded polyethylene case for seven wireless microphones with two lift out trays for receivers, beltpacks and accessories. TSA locking latches with impact diversion dishes. Comfortable ergo-grip handle. Protective foam-lined interior. Wireless System Cases GM-1W Single wireless system bag. Access for antenna to be extended while in bag. Holds lavaliers, cables and wireless mic with receiver mounted. Front and rear access unzips for easy setup in the field. Shoulder strap and information card window. GM-1W GTSA-MICW7 GTSA-MICW6 GAT1167 RRP: GM-1WEVAA Slim rigid 5mm EVA rubber-foam design half-rack wireless system bag. Access for antenna to be extended while in bag. Holds lavaliers, beltpack transmitter, cables and wireless mic with receiver mounted. Front and rear access unzips for easy setup in the field. Shoulder strap and information card window. GM-1WEVAA TSA series ATA molded polyethylene case for six wireless microphones with storage for eighteen batteries. TSA locking latches with impact diversion dishes. Comfortable ergo-grip handle. Protective foam-lined interior. GTSA-MICW6 G-IN EAR SYSTEM GAT1168 RRP: GM-1WP Bag to accommodate half rack wireless "In Ear" monitoring system. Storage for transmitter, ear buds, receiver body back, and power supply Single ATA molded wireless mic case. Rugged, stackable polyethylene construction. Access for antenna to be extended while in bag. Space for beltpack, lavaliers, cables and wireless mic. Adjustable tray height. G-IN EAR SYSTEM GM-1WP 22 GAT1169

23 Recording GR-2L Molded PE Rack Case; Front, Rear Rails; 2U; 19" Deep; Locking G-BROADCASTER GR-2L Field recorder utility bag. Stores most field recorders, two microphones, headphones and cable. One cavity for smaller handheld micro recorders, one cavity for larger format field recorders. Viewable window to see recorder control panel while in bag. Polyurethane foam protection and adjustable shoulder strap. G-BROADCASTER GAT1212 GR-2S Molded PE Rack Case; Front, Rear Rails; 2U; 14.25" Deep GR-2S GAT1213 GR-3S GAT1004 RRP: Molded PE Rack Case; Front, Rear Rails; 3U; 14.25" Deep GR-3S G-MICRO PACK GAT1214 GR-4L EVA foam shell carrying case designed to fit most micro recorders, headphones, & accessories. Main cavity size 8" x 10" x 2". Storage for medium size headphones. Storage for SD media cards, batteries and USB cables. Removable shoulder strap. Molded PE Rack Case; Front, Rear Rails; 4U; 19" Deep; Locking GR-4L GAT1215 RRP: GR-4S Molded PE Rack Case; Front, Rear Rails; 4U; 14.25" Deep GR-4S G-MICRO PACK GAT1013 RRP: GAT1216 GR-6L Molded PE Rack Case; Front, Rear Rails; 6U; 19" Deep; Locking GR-6L Racks - Portable Standard Molded Audio Racks GAT1217 GR-6S Molded PE Rack Case; Front, Rear Rails; 6U; 14.25" Deep Gator s polyethylene molded (LLDPE) rack cases are the perfect lightweight yet durable rack solution. The comfortable recessed side handles and threaded, field-replaceable commercial-grade plated front and rear rack rails round off the cases. Standard (L) racks have a depth of 19.25". Shallow (S) racks have a depth of 14.75". Rolling Racks (RR) have pull out handles and roller blade-style recessed rails. GR-6S GAT1218 RRP: GR-8L Molded PE Rack Case; Front, Rear Rails; 8U; 19" Deep; Locking GR-8L GAT1219 RRP: GRR-4L Molded PE Rack Case; Front, Rear Rails; 4U; 19" Deep; Locking, Pull Handle, Recessed Wheels GRR-4L GAT1234 RRP: GRR-6L Molded PE Rack Case; Front, Rear Rails; 6U; 19" Deep; Locking, Pull Handle, Recessed Wheels GRR-6L GAT1235 RRP: GRR-10L Molded PE Rack Case; Front, Rear Rails; 10U; 19" Deep; Locking, Pull Handle, Recessed Wheels GRR-10L GR-10L Molded PE Rack Case; Front, Rear Rails; 10U; 19" Deep; Locking GR-10L GAT1210 RRP: RRP: GRR-8L Molded PE Rack Case; Front, Rear Rails; 8U; 19" Deep; Locking, Pull Handle, Recessed Wheels GRR-8L GR-12L GAT1233 GAT1236 RRP: Molded PE Rack Case; Front, Rear Rails; 12U; 19" Deep; Locking GR-12L 23 GAT1211 RRP:

24 Rack Bags Pop-Up Console Racks Heavy-duty rack bag, great for effects processors and recording equipment. Polyethylene-reinforced interior frame and internal reinforced aluminum valance. Rear flap allows access to entire panel of equipment. Dual comfort grip carry handles. Adjustable shoulder strap. 600-denier nylon exterior. Exterior pocket for cables and accessories. Lightweight polyethylene construction. Ratchet top which allows adjusting to various angles during use, and transporting with the top flat. Front, rear and top rack rails with rear wire access. Recessed side handles. Compact size for easy transport. GRB-2U Rack Bag; Nylon Over Plywood Construction; 2U GRB-2U GAT1223 RRP: GRB-3U Rack Bag; Nylon Over Plywood Construction; 3U GRB-3U GAT1224 RRP: GRC-10X12 PU GRB-4U ATA Molded PE Pop-Up Console Rack; 10U Top; 12U Bottom; w/ Casters GRC-10X12 PU Rack Bag; Nylon Over Plywood Construction; 4U GRB-4U GAT1225 GAT1226 RRP: GRC-10X8 PU GR-RACKBAG-2U ATA Molded PE Pop-Up Console Rack; 10U Top; 8U Bottom 2U Lightweight rack bag with aluminum frame and PE reinforcement GR-RACKBAG-2U GAT1220 GRC-10X8 PU GAT1230 RRP: GRC-12X10 PU GR-RACKBAG-3UW ATA Molded PE Pop-Up Console Rack; 12U Top; 10U Bottom; w/ Casters 3U Lightweight rolling rack bag with retractable tow handle, aluminum frame and PE reinforcement GRC-12X10 PU GR-RACKBAG-3UW GAT1221 GAT1231 RRP: GR-RACKBAG-4UW 4U Lightweight rolling rack bag with retractable tow handle, aluminum frame and PE reinforcement GR-RACKBAG-4UW 24 GAT1222

25 Slant Top Console Racks Rackwork Rack Accessories Lightweight polyethylene construction. Slant top. Front, rear and top rack rails with rear wire access. Recessed side handles. Compact size for easy transport. The Rackworks line from Gator Cases features a large selection of steel rack drawers with smooth-glide drawer slides and spring loaded latches, offered in standard and shallow 2, 3, and 4U sizes with select models available with custom inserts including pluck-able diced foam and microphone nests. A variety of stationary and adjustable shelves provide storage and mounting for any piece of equipment. Lastly, each enclosure can be finished off with flat or flanged panels for a clean and sleek presentation. Drawers Gator Rackworks rack drawer are constructed of cold rolled 16 gauge steel, with fully enclosed drawer & spring-loaded latches. Black powder coated finish. Heavy-duty smooth glide drawer slides. Lock knock-out, lock and key included. Two 2" rubber grommets for rear access. Available in 14.2" and 10" depths, and with diced foam, mic insert or empty interior. GRC-10X4 ATA Molded PE Slant Top Console Rack; 10U Top; 4U Bottom GRC-10X4 GAT1227 RRP: GRC-10X6 ATA Molded PE Slant Top Console Rack; 10U Top; 6U Bottom GRC-10X6 GAT1228 RRP: GRC-10X8 ATA Molded PE Slant Top Console Rack; 10U Top; 8U Bottom GRC-10X8 GAT1229 RRP: GRC-BASE-10 ATA Molded PE Rack w/ Casters; Fits Under Gator GRC Series; 10U; 21" Deep GRC-BASE-10 GAT1232 RRP: GRW-DRW2 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; 2U GRW-DRW2 GAT1237 GRW-DRW3 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; 3U GRW-DRW3 GAT1238 GRW-DRW4 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; 4U GRW-DRW4 GAT1239 GRW-DRWDF3 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; Diced Foam Interior; 3U GRW-DRWDF3 GAT1240 GRW-DRWDF4 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; Diced Foam Interior; 4U GRW-DRWDF4 25 GAT1241

26 GRW-DRWMIC10 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; Interior has Insert for 10 Microphones; 2U GRW-DRWMIC10 GAT1242 RRP: GAT1243 RRP: GAT1244 Panels GRW-DRWSH2 Gator Rackworks Rack Drawer; 10" Deep; 2U GRW-DRWSH2 GRW-DRWSH3 Gator Rackworks Rack Drawer; 10" Deep; 3U GRW-DRWSH3 GRW-DRWWRLSS GRW-PNLALFT3 Gator Rackworks Rack Drawer; 14.2" Deep; Lockable; Interior has Insert for 4 Wireless Microphone Systems & Accessories; 3U Gator Rackworks Aluminum Flat Panel; 3mm; Black; 3U GRW-DRWWRLSS GAT1245 GRW-PNLALFT3 GAT1246 RRP: GRW-PNLPRF1 Gator Rackworks Slotted Panel; 5/32" Vent Holes; 1.2mm; Flanged for Rigidity; 1U Shelves GRW-PNLPRF1 GAT1248 RRP: GRW-SHELF1SLD GRW-PNLPRF2 Gator Rackworks Sliding Shelf; 13.8" Deep; 1U GRW-SHELF1SLD GAT1256 RRP: GRW-PNLPRF2 GRW-SHELF2 Gator Rackworks fixed utility shelf; 15" deep; 2U GRW-SHELF2 Gator Rackworks Slotted Panel; 5/32" Vent Holes; 1.2mm; Flanged for Rigidity; 2U GAT1257 GAT1249 RRP: GRW-PNLPRF3 RRP: Gator Rackworks Slotted Panel; 5/32" Vent Holes; 1.2mm; Flanged for Rigidity; 3U GRW-PNLPRF3 Cable Management Gator Rackworks Security Cover; Non-PVC Rubber Edging; 5/32" Holes; 1" Space Between Panel & Gear; 1U Gator Rackworks Cable Management w/ Cap; 1U GRW-PNLSEC1 GAT1247 RRP: GAT1251 RRP: GRW-PNLSEC2 Gator Rackworks Security Cover; Non-PVC Rubber Edging; 5/32" Holes; 1" Space Between Panel & Gear; 2U Hardware GRW-PNLSEC2 GRW-SCRW100 GAT1252 RRP: GRW-PNLVNT1 Gator Rackworks 10/32" X 3/4" Rack Screws Qty Pack GRW-SCRW100 RRP: GRW-PNLSEC1 GRW-PNLCBLMNG1 GRW-PNLCBLMNG1 GAT1250 GAT1255 RRP: Gator Rackworks Slotted Panel; Elongated Vent Holes; 1.2mm; Flanged for Rigidity; 1U GRW-PNLVNT1 GAT1253 RRP: GA-20 GRW-PNLVNT2 Pack of ten x 5/8" black rackmount screws with cups. GA-20 GAT1085 RRP: 1.24 Gator Rackworks Slotted Panel; Elongated Vent Holes; 1.2mm; Flanged for Rigidity; 2U GRW-PNLVNT2 26 GAT1254 RRP: 14.16

27 Utility ATA Tour-Style Utility Cases ATA Molded Utility Cases ATA wood pack trunk cases. 9mm plywood construction with laminated exterior. Red recessed twist latches. Heavy-duty commercial grade plated hardware and reinforced ball corners. Truck pack trunk with hinged lid and grey carpet Interior. Recessed dishes on top of case allow stackability. 4 casters, 2 locking. Available as an empty trunk or with plywood dividers and two lift out trays. GTSA-UTL TSA Series ATA Molded Polyethylene Utility Case; 20"x30"x8" GTSA-UTL GAT1290 RRP: GTSA-UTLDF TSA Series ATA Molded Polyethylene Utility Case With Diced Foam Interior; 11"x16"x5" GTSA-UTLDF GAT1291 GTSA-UTLDF G-TOURTRK Tour style truck pack case. 30"x22.5"x22.5" with 12mm plywood construction. Includes two plywood dividers and two lift out trays. G-TOURTRK GAT1080 RRP: G-TOURTRK3022HS ATA Wood Flight Truck Pack Trunk Case; 30" x 22" x 22" Exterior Before Casters; 9mm Wood G-TOURTRK3022HS GAT1081 RRP: G-TOURTRK Tour style truck pack. 45"x30"x30" with 12mm plywood construction. Includes three plywood dividers and two lift out trays. G-TOURTRK GAT1082 TSA Series ATA Molded Polyethylene Utility Case With Diced Foam Interior; 19"x19"x7" GTSA-UTLDF GAT1292 RRP: GTSA-UTLPLT1813 TSA Series ATA molded polyethylene utility case with (2) tool pallet trays; 18"x13"x7" GTSA-UTLPLT1813 GAT1294 RRP: GTSA-UTLDF TSA Series ATA molded polyethylene utility case with diced foam Interior; 22"x25"x8" GTSA-UTLDF GAT1293 RRP: RRP: LCD/Plasma/LED G-TOURTRK4530HS ATA Wood Flight Truck Pack Trunk Case; 45" x 30" x 30" Exterior Before Casters; 9mm Wood G-TOURTRK4530HS 27 GAT1083 RRP:

28 G-Tour LCD/Plasma Flight Cases imac Tote Series Gator s G-Tour Series LCD / Plasma cases offer superior quality and protection with functionality. All G-Tour cases are constructed of heavy-duty plywood with a laminated exterior for added durability. The cases include the Gator signature red twist latches and spring-loaded rubber gripped handles. The heavy-duty commercial-grade hardware and reinforced ball corners are made to withstand constant transport. Padded Nylon creative professional tote bag designed to fit the 21 and 27 imac. Water resistant flecked grey exterior with black accents. Adjustable interior padding and foam block cradle for perfect, secure fit. Interior cable pocket. Hard panel reinforcement in front flap for extra screen protection. imac can be used in the case with two side ports along with a folding sun and dust shield. A dual-zipper enclosure allows for easy loading and unloading. Large exterior accessory pocket. Magnet tablet pocket, full width keyboard pocket and media pockets for mouse, trackpad, SD cards, hard drives, and more. Built-in Rain cover with strap and handle cut outs. Reinforced Carry Handles & Removable adjustable carry strap. Rubber feet and PVC protection on bottom of bag. G-CPR-IM21 Creative Pro Series Padded Nylon Tote Bag for Transporting 21 Apple imac Computers G-CPR-IM21 GAT1404 RRP: Lightweight LCD/Plasma Cases GL-LCD-2224 Lightweight LCD monitor carry case. Lined polyethylene foam interior and nylon exterior. Tricot-covered hook and loop adjustable interior blocks for various sized monitors and bases. Rugged nylon web carry handle and accessory pocket. Exterior viewable document and two business card pockets. Interior dimensions 25" x 20" x 9.5". G-TOURLCDV G-TOUR case designed to easily adjust and fit most LCD, LED or plasma screens in the 50 to 55 inch class. Interior dims 55 X 6.3 X 35 G-TOURLCDV GAT1073 RRP: GL-LCD-2224 G-TOURLCDV X2 G-MONITOR2-GO19 G-TOUR case designed to easily adjust and fit two LCD, LED or plasma screens in the 50 to 55 inch class. Interior dims 55 X 6.3 X 35 (X2) Compact carry case for flat screen monitors up to 19". Lightweight EPS construction with EVA reinforcement. Internal padded straps to restrain the monitor. Storage compartment for cables and other peripherals. Soft adjustable base support. Ergo grip carry handle and padded shoulder strap. G-TOURLCDV X2 GAT1074 RRP: G-TOURLCDV G-TOUR case designed to easily adjust and fit most LCD, LED or plasma screens in the 60 to 65 inch class. Interior dims 62.5 X 6.3 X 36 G-TOURLCDV GAT1075 G-MONITOR2-GO19 G-TOUR case designed to easily adjust and fit two LCD, LED or plasma screens in the 60 to 65 inch class. Interior dims 62.5 X 6.3 X 36 (X2) GAT1076 RRP: GAT1036 GAT1037 G-MONITOR2-GO22 Compact carry case for flat screen monitors up to 22". Lightweight EPS construction with EVA reinforcement. Internal padded straps to restrain the monitor. Storage compartment for cables and other peripherals. Soft adjustable base support. Ergo grip carry handle and padded shoulder strap. G-MONITOR2-GO22 28 RRP: G-TOURLCDV X2 G-TOURLCDV X2 GAT1157

29 LCD/LED Tote Bags Heavy-duty nylon construction Tote bags. 25mm PE foam padding on all sides to protect screen. Polyethylene reinforced front provides protection for screen. Tricot lined interior. Dual zippered design allows for easy load in. Durable nylon web carry handles. Adjustable and removable reinforced shoulder strap. Lighting Lighting Cases and Bags G-LEDBAR-4 Designed to hold four 1m LED light bars with clamps attached. Compact rugged nylon construction. Four heavily padded interior compartments. External accessory compartment. Built-in wheels and pull-out handle. G-LEDBAR-4 GAT1011 RRP: GAT1347 RRP: GAT1277 RRP: GP-66 Par Can Light Bag; 18" x 10" x 10" G-LCD-TOTE50 GP-66 Padded Nylon Carry Tote Bag for Transporting 50 LCD Screens G-LCD-TOTE50 GAT1406 RRP: G-LCD-TOTE60 GTSA-LEDBAR4 Padded Nylon Carry Tote Bag for Transporting 60 LCD Screens G-LCD-TOTE60 GAT1407 RRP: G-LCD-TOTE-SM Padded nylon carry tote bag for transporting LCD screens between 19" - 24" G-LCD-TOTE-SM ATA Lighting Cases GAT1010 Designed to hold four 1m LED light bars with clamps attached. Four heavily padded interior compartments. Nearly indestructible polyethylene construction. Two TSA locking latches with impact diversion dishes. 200lb weight capacity, recessed in-line wheels. RRP: GTSA-LEDBAR4 G-LCD-TOTE-MD Padded nylon carry tote bag for transporting LCD screens between 27" - 32" G-LCD-TOTE-MD GAT1009 G-LCD-TOTE-LG Padded nylon carry tote bag for transporting LCD screens between 40" - 45" G-LCD-TOTE-LG GAT1008 Laptop and Projector ATA Laptop/Projector Cases GTSA-LAPTOP TSA series molded polyethylene laptop case. Carpet lined interior. Retractable pull-out handle, recessed wheels. Tricot-covered EPS padded compartment with adjustable wedges. Removable EVA foam-padded tray to hold laptop. Maximum laptop dimensions 16.5" x " x 2" GTSA-LAPTOP 29 GAT1276 RRP: