Springer-Vedag London Ltd.
|
|
- Clementine Manning
- 5 years ago
- Views:
Transcription
1 AutoCAD Express NT
2 Springer-Vedag London Ltd.
3 Timothy McCarthy AutoCAD Express NT Covering Release 14, Springer
4 Dr Timothy McCarthy Department of Civil and Structural Engineering UMIST P.O. Box 88 Manchester M601QD British Library Cataloguing in Publication Data McCarthy, Timothy j. AutoCAD express N.T. : covering Release AutoCAD (Computer file) I. Title 620'. 0042'0285'5369 ISBN ISBN (ebook) DOI / Library of Congress Cataloging-in-Publication Data McCarthy, Tim, AutoCAD express NT: covering release 14/ Tim McCarthy p. cm. Includes index. 1. Computer graphics. 2. AutoCAD (computer file) 3. Microsoft Windows NT. 1. Til1e T3R5.M '0285'5369--dc Apart from any fair deal ing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permis sion in writing of the publishers, or in the case of reprographic reproduction in accordance with the lerms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduclion outside those terms should be sent to the publishers. Timothy McCarthy 1999 Originally published by Springer-Verlag London in 1999 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from lhe relevant laws and regulations and therefore free for general use. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions thal may be made. Typesetting: Camera ready by author 69/ Printed on acid-free paper
5 For Fiona and Sean
6 ACKNOWLEDGEMENTS I would like to express my deep gratitude to all those who helped me with this project. I am indebted to my colleagues in the Department of Civil and Structural Engineering at UMIST and in the Department of Civil Engineering at Stanford University. Smail Derouiche and Kirti Ruikar helped enormously with testing the exercises. Thanks also to my students from whom I have learned so much and to the Autodesk team in Guildford, UK and San Rafael, California. My special thanks to Grace, Fiona and Sean for everything. September 1998 Tim McCarthy Trademark acknowledgements AutoCAD and Autodesk are registered trademarks of Autodesk, Inc. Postscript is a trademark of Adobe Systems. Windows, Windows NT and Microsoft are trademarks of the Microsoft Corporation. Hewlett-Packard is a trademark of Hewlett-Packard, Inc. Other trademarked names appear throughout the book. The use of such names is purely for editorial clarity and for the benefit of the trademark owner without any intention to infringe on those trademarks.
7 CONTENTS 1 INTRODUCTION.... What is AutoCAD?.... The aims of the AutoCAD Express. The Express route through AutoCAD Conventions used in the AutoCAD Express RETURN or ENTER?.... Presentation of user-auto CAD dialogue Control keys.... Menus.... Other conventions.. The Windows environment Windows' Desktop Window control.. Windows Explorer Windows hot-keys Summary STARTING AUTOCAD Preparation The AutoCAD icon. Creating a drawing.... The drawing window. AutoCAD's menus.. Selecting tool bars... How about a bit of doodling? The tool boxes Setting up the drawing environment Drawing size.... Drawing lines AutoCAD's command memory Linetypes and scales and colors Saving the drawing. Autosave setting Adding some text.. HELP!.... Context sensitive help
8 x Contents Finishing up.... A note on file security Summary CURSOR AND DISPLAY CONTROL General.... Layers.... Cursor location Rulers, grids and snapping. Two dimensional coordinate notation. Digital setsquares.. Snapping to objects.... ZOOM and PAN.... Keyboard toggles and transparent commands Finish for the time being. Summary DRAWING AND EDITING General.... Opening a drawing file.... Rubbing out and OOPS... Object selection modes. Erasing some lines... Window selection.... OOPS! I didn't mean to rub that out. Crossing windows and polygons. The Balloon drawing environment Creating circles, arcs and ellipses Circles.... Many ways to draw an ARC. Rectangles and Ellipses Adding text..... Text styles... Style command Wide lines.... Aerial view.. Donuts and discs Shading with patterns Summary
9 Contents Xl 5 CONSTRUCTIVE EDITING General.... Drawing the arch Editing a polyline with PEDIT Moving objects.... Rotating objects..... Copying.... Altering objects' characteristics Enlarging objects... Stretching objects into shape Mirror image Multiple copies using ARRAY. Rectangular arrays.... Circular arrays Rotated rectangular arrays Finishing up. Summary SUPER-ENTITIES General... Making a block. Inserting blocks. Global blocks.. Making a library of useful symbols The kitchen sink Coloured blocks Edi ting a block Assigning text information to blocks Defining an attribute... Drawing the kitchen Assembling the fitted kitchen Editing attributes... A simple bill of materials... Hints on using blocks AutoCAD's inquiry commands Summary ADVANCED DRAWING AND DIMENSIONING General.... A template for drawing a gland. Point and Divide Trimming entities. Dimensioning
10 xu Contents Dimension style... Editing dimensions. Standard dimension styles Drawing a pentagon... Wrapping up dimensions. Summary ADDING DEPTH TO YOUR DRAWINGS WITH 3D CAD General.... Isometric projection.... The Express State Building in 2.5 dimensions Views and more views.... Multiple views.... Model space and paper space.. The Pyramids of Giza in glorious 3D. Making the faces solid Define your own coordinate system The all seeing eye A dynamic viewpoint on visualisation Getting things in perspective Two more pyramids.. AutoCAD's 3D box of tricks. Meshes.... Generated surfaces 3D objects. 3D solids Summary... 9 THE HARDCOPY - PRINTING AND PLOTTING General.... Printing and plotting.... Printers and plotters Plotting the GLAND drawing. Altering the plot parameters Scales and preview.. Saving a VIEW.... Multicolored plotting. Plotting a view... Postscript output... Plotting multiple viewports in paper space. A simple title block for EXP-GIZA Paper space Manipulating metaviews
11 Contents XUl Cross referencing drawing files. Dependent blocks... A note on XREF files The softcopy.... Safety first.... Copying to other Windows applications Object linking and embedding. Summary.... APPENDIX A: CONFIGURATION General.... AutoCAD Preferences Profiles.... Display.... Project file paths Customizing a toolbar SUBJECT INDEX
AutoCAD for Windows Express
AutoCAD for Windows Express Tim McCarthy AutoCAD for Windows Express With 195 Figures Springer-Verlag London Berlin Heidelberg New York Paris Tokyo Hong Kong Barcelona Budapest Timothy J. McCarthy, PhD
More informationIntroduction to IntelliCAD 6
Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationComputer-Aided Design (CAD) ก ก CAD. 3 Working with drawing: ก Drawing ก Drawing ก ก Drawing Paper size Scale factor Text. Object ก Orthogonal mode ก
1 ก ก ก ก ก ก ก ก ก ก CAD ก ก ก 1 ก : ก ก ก CAD ก Computer-Aided Design (CAD) ก ก CAD 2 ก : ก Installation CAD ก ก Start ก CAD ก ก Toolbar ก ก 3 Working with drawing: ก Drawing ก Drawing ก ก Drawing Paper
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTable of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...
Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....
More informationESSENTIALS. Munir M. Hamad Autodesk Approved Instructor
AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationInside the Smart Home
Inside the Smart Home i Springer London Berlin Heidelberg New York Hong Kong Milan Paris Tokyo ii Richard Harper (Ed.) Inside the Smart Home iii Richard Harper, PhD The Appliance Studio, University Gate
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationRequired Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationInnovations and the Environment
Innovations and the Environment Yoram Krozer Innovations and the Environment 123 Yoram Krozer, PhD Cartesius Institute Institute for Sustainable Innovations of the Netherlands Technical Universities Zuidergrachtswal
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationPart I Introduction to CorelCAD
Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting
More informationDrawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.
Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the
More informationAutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods
AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,
More informationWhen you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTable of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...
Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting
More informationAutoCAD Essentials. Course Length: 3 days
AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationAutoCAD & AutoCAD LT The book you need to succeed! DVD Included! Ellen Finkelstein. Start drawing today with Quick Start tutorial
DVD Included! Trial versions of AutoCAD 2011 and AutoCAD LT 2011 Drawings for the exercises, add-on programs, and more Ellen Finkelstein AutoCAD 2011 & AutoCAD LT 2011 Start drawing today with Quick Start
More informationFirst Level 2D Fundamentals
AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationCopyright IntelliCAD Technology Consortium. All rights reserved. Information in these materials is furnished for informational use only, is
Using IntelliCAD 2001 Copyright 1999-2001 IntelliCAD Technology Consortium. All rights reserved. Information in these materials is furnished for informational use only, is subject to change without notice
More informationTesting Safety-Related Software
Testing Safety-Related Software Springer London Berlin Heidelberg New York Barcelona Hong Kong Milan Paris Santa Clara Singapore Tokyo Stewart Gardiner (Ed.) Testing Safety-Related Software A Practical
More informationA TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company
A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California
More informationRelease: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History
More informationCOMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION
LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: 3 COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MCE 511 ENGR. ALIYU, S.J Course title: Computer-Aided Engineering
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More information1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity
Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationTutorial 2: Setting up the Drawing Environment
Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationAutoCAD /AutoCAD LT Essentials
AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training
More informationAutoCAD 2018 and AutoCAD LT 2018
AutoCAD 2018 and AutoCAD LT 2018 Essentials Scott Onstott Development Editor: Kathryn Duggan Technical Editor: Ian le Cheminant Production Editor: Rebecca Anderson Copy Editor: Elizabeth Welch Editorial
More informationZooming in on Architectural Desktop Layouts Alexander L. Wood
December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD
More informationSKKK 1021 Engineering Drawing
SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use
More informationTemplate Drawings. Template Drawings. AutoCAD Essentials
AutoCAD Essentials Starting a new drawing using any CAD software requires a series of steps. Measurement units, sheet size, layer designations, text fonts and text sizes plus many more items must be set.
More informationIN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing
IN-CLASS DEMONSTRATION Introduction to AutoCAD 2011 and 2-Dimensional Drawing GISC, UNIVERSITY OF CALIFORNIA BERKELEY LABORATORY GOALS In this module you will be introduced to the AutoCAD 2011 interface
More informationAssignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
More informationConquering the Rubicon
Autodesk Inventor R10 Fundamentals: Conquering the Rubicon Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Schroff Development Corporation P.O. Box 1334
More informationAutodesk AutoCAD Architecture 2015 Fundamentals
Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationAutoCAD LT 2009 Tutorial
AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson
More informationManufacturing Challenges in Electronic Packaging
Manufacturing Challenges in Electronic Packaging Manufacturing Challenges in Electronic Packaging Y.C. Lee University of Colorado, Boulder, CO, USA and WT. Chen formerly a Senior Technical Staff Member,
More informationAutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation
AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction
More informationSection 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics
Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)
More informationPower Electronics Semiconductor Switches
Power Electronics Semiconductor Switches Power Electronics Semiconductor Switches R.S. Ramshaw Department of Electrical and Computer Engineering University of Waterloo Ontario Canada SPRINGER-SCIENCE+BUSINESS
More informationMODERN DAIRY TECHNOLOGY
MODERN DAIRY TECHNOLOGY Volume 1 Advances in Milk Processing Second Edition MODERN DAIRY TECHNOLOGY Volume 1 Advances in Milk Processing Second Edition Edited by R. K. Robinson Department of Food Science
More informationA Practical Guide to AutoCAD 2019
A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationCome Back to the Other Side - AutoCAD for MicroStation Users
11/30/2005-8:00 am - 9:30 am Room:Peacock 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Come Back to the Other Side - AutoCAD for MicroStation Users Mark Mates - ProSoft GD31-2 This
More informationSDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology
AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric
More informationAppendix to Chapter 1 Release 3
Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,
More informationSergey Ablameyko and Tony Pridmore. Machine Interpretation of Line Drawing Images. Technical Drawings, Maps and Diagrams.
Sergey Ablameyko and Tony Pridmore Machine Interpretation of Line Drawing Images Technical Drawings, Maps and Diagrams i Springer Sergey Ablameyko, PhD, DSc, Prof, FlEE, FIAPR, SMIEEE Institute of Engineering
More informationAutodesk Raster Design for Mapping and Land Development Professionals David Zavislan, P.E.
December 2-5, 2003 MGM Grand Hotel Las Vegas Autodesk Raster Design for Mapping and Land Development Professionals David Zavislan, P.E. GI12-1 Explore the new and enhanced functionality in Autodesk Raster
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationAutodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
More informationPlotting from Start to Finish With AutoCAD 2004
December 2-5, 2003 MGM Grand Hotel Las Vegas Plotting from Start to Finish With AutoCAD 2004 Speaker: J.C. Malitzke Assistant: David Harrington Assistant: Shaan Hurley Driver: Craig Black Code: GD11-1L
More informationA Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2015 All rights reserved. No
More informationTools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih
Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationCOMPUTER AIDED ENGINEERING DRAWING
FIRST SEMESTER COMPUTER AIDED ENGINEERING DRAWING COMPUTER SIMULATION LAB DEPARTMENT OF ELECTRICAL ENGINEERING Prepared By: Checked By: Approved By: Engr. Sidra Jhangir Engr. M.Nasim Khan Dr.Noman Jafri
More informationJan de Witt s Elementa Curvarum Linearum Liber Secundus
Jan de Witt s Elementa Curvarum Linearum Liber Secundus For other titles published in this series, go to http://www.springer.com/series/4142 Sources and Studies in the History of Mathematics and Physical
More information9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN
SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI
More informationFine HVAC Quick Start Guide
Fine HVAC Quick Start Guide 1. Installation Launching 2. CAD Environment 3. Calculation Environment Preface This Quick Start Guide provides a fast and friendly introduction on Fine HVAC main features
More informationAutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationComputer Graphics Fundamentals NOS237. Systems.
Computer Graphics Fundamentals NOS237 B asford Systems www.basford.com.au Basford Systems This documentation and accompanying files are copyrighted. Other than for the purposes of and subject to the conditions
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationENGINEERING DRAWING AM 09
AM SYLLABUS (2014) ENGINEERING DRAWING AM 09 SYLLABUS 1 Engineering Drawing AM09 (Available in September) Syllabus Paper I (3 hrs) + Paper II (3 hrs) + coursework Aims The aims of the syllabus are to further
More informationAutoCAD Architecture 2018 Fundamentals
Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationIntroduction to AutoCAD 2010
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 5 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Call the Polyline tool, either by entering
More informationFrom Raster to Vector: Make That Scanner Earn Its Keep!
December 2-5, 2003 MGM Grand Hotel Las Vegas From Raster to Vector: Make That Scanner Earn Its Keep! Felicia Provencal GD31-2 This class is an in-depth introduction to Autodesk Raster Design, formerly
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationAutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric
More informationMEM30001B Computer Drafting Basics MEM30001A. Use computer aided drafting systems to produce basic engineering drawings.
MEM30001A Use computer aided drafting systems to produce basic engineering drawings. BlackLine Design Page 1 of 31 Table of Contents Conditions of Use:... 2 Unit Resource Manual... 2 Manufacturing Skills
More informationToothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
More informationVectorworks / MiniCAD Tutorials
Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4
More information