2. Go to the lower left corner and hold the left mouse button down and drag it diagonally to the right. This will highlight the entire drawing.
|
|
|
- Erin Roberts
- 5 years ago
- Views:
Transcription
1 Problem Description How to Ensure Accurate Front to Back Registration Utilizing Target Holes. Requirements CircuitCAM template file: TargetHoles file for CircuitCam 3.x for CircuitCam Version 3.x TargetHoles file for CircuitCam 4.x for CircuitCam Version 4.x TargetHoles file for CircuitCam 5.x for CircuitCam Version 5.x TargetHoles file for CircuitCam 6.x for CircuitCam Verison 6.x Problem Solution 1. First import your complete drawing 2. Go to the lower left corner and hold the left mouse button down and drag it diagonally to the right. This will highlight the entire drawing. 3. Press Ctrl+B. This is the combine function, which connects endpoints making such things as your board outline one entity. 4. Hit the Esc key. 5. Go back to the lower left corner and left click the mouse button once. This will select the board outline. You should see the little boxes around your board outline, and the word board outline in the first dialogue box. 1 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
2 6. With the board outline highlighted, go to Edit/Set Zero Point (short cut Shift+N), or press the Set Zero point icon in CircuitCAM. 7. Now continue with the process of insulating your drawing and setting up your contour routing. 8. When finished insulating your drawing, go to File/Open. 9. Select the TargetHoles_32.cam (for CircuitCam 3.x), TargetHoles_40.cam (for CircuitCam 4.x), TargetHoles_50.cam (for CircuitCam 5.x), or TargetHoles_60.cam (for CircuitCam 6.x), file associated with the CircuitCam version in use. 2 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
3 10. Go to the lower left corner of the drawing and hold down the left mouse button and drag it across your drawing to highlight the entire drawing. Right click your mouse button and select copy. 11. Select File/Close. If asked if you want to save changes select No. 12. Your main drawing should be back on your computer screen at this point. Right click the mouse button and select paste. You should now see your target holes just outside your board outline. (The above drawing has been magnified) 3 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
4 13. Now go to File/Export/LPKF/LPKFCircuitBoardPlotter. 14. Open your Board Master and import your drawing. 15. Complete the Marking Drills, Drilling Plated, Drilling Unplated, and Milling Bottom phases and flip your board. 16. Before you proceed with milling the top layer, we will utilize the target holes to check and make adjustments to the placement of the drawing if need be. 17. Select the MillingTop phase. 18. From in on your drawing until you can plainly see your target holes. 4 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
5 19. Select the button to the left of the magnifying glass. Hold down your left mouse button and create a window around one individual target hole. 20. The target hole should then turn White. 21. Select the + (plus) button and the hole will turn Red. 22. Select the Start button and Board Master will prompt you for a tool. 5 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
6 23. Insert the tool if it isn t already in and hit OK. 24. At this point, your ProtoMat milling machine will mill that individual target hole. 25. Select GoTo/Pause. 26. This will allow you to look at the pad to determine if it is centered on the drill hole. 27. A graticle microscope will help determine the offset so you can make a precise adjustment in the drawing placement. 28. Using the scope, look at the target hole. The sample below is what may be seen through the scope (Remember that what is seen through the scope is 180 Degrees out of phase). +X C A -Y B +Y D - X 28. Measure the distances on each side of the hole to the inside of the cut. 29. The idea is to move the milling data (or drawing placement so that the hole is centered inside of the path. The formula for the Y offset is A-B/2=Y Offset. The formula for the X offset is C-D/2=X Offset. I.E: If +Y was 14 mils and -Y is 8 mils, plug in the numbers, (14-8)/2=3 mils Offset. 6 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
7 30. Right click, with the cursor over the board in Board Master, this will open the placement window. 31. Based on the example used to demonstrate the formula above, we would add 3 mils (0.003 inches) to the Y origin. As you can see, Y is a negative number, so we would add.003 to 1.580, which equals After making the adjustments in the placement, repeat steps on the remaining Target Holes until satisfied with the results. References Board Master Supplement Instruction LPKF Technical Support Author Jeffrey R Bengtson 7 / 7 HT-Target Holes.doc Author: LPKF/Jeff Bengtson
Processing Gerber Files in CircuitPro
Processing Gerber Files in CircuitPro Requirements 1. Circuit Pro version 1.5 revision 164 or higher 2. Set of Gerber Files Process Steps 1. Execute Process Planning Wizard. a. Press the process planning
How-To Document. 3. Load the tool list a. Go to the configuration menu, select tool library, then click on Mill/Drill.
Problem/Procedure Description Creating a multilayer PCB with boardmaster 5 Requirements LPKF Milling machine Fiducial recognition camera Boardmaster 5.0 software USB 2.0 port Multi-Press S or Multi-Press
Problem/Procedure Description. Requirements. Problem/Procedure Solution. How-To Document. Updated on: 11/13/2008 By:Christopher Ware
Problem/Procedure Description Performing maintenance on 95s, 95sII and H100 Requirements Ball Bearing Grease (LPKF P/N 106976) Tri-Flow Teflon lubricant aerosol. 3-in-1 Multi-purpose Oil Electronic Component
Toothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
Modeling an Airframe Tutorial
EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If
Getting Started. Right click on Lateral Workplane. Left Click on New Sketch
Getting Started 1. Open up PTC Pro/Desktop by either double clicking the icon or through the Start button and in Programs. 2. Once Pro/Desktop is open select File > New > Design 3. Close the Pallet window
Welcome to SPDL/ PRL s Solid Edge Tutorial.
Smart Product Design Product Realization Lab Solid Edge Assembly Tutorial Welcome to SPDL/ PRL s Solid Edge Tutorial. This tutorial is designed to familiarize you with the interface of Solid Edge Assembly
Session 3: Getting to Know Photoshop Elements. Keep in mind that there are many others ways of solving the problems.
Tutorial Session 3: Getting to Know Photoshop Elements Now that you have taken some pictures you might have noticed that some of the images have little problems like red-eye, colorcast, and too dark or
Solid Part Four A Bracket Made by Mirroring
C h a p t e r 5 Solid Part Four A Bracket Made by Mirroring This chapter will cover the following to World Class standards: Sketch of a Solid Problem Draw a Series of Lines Finish the 2D Sketch Extrude
Tutorial 1 getting started with the CNCSimulator Pro
CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro
Scanning Guide for Adobe Photoshop
Scanning Guide for Adobe Photoshop This guide is written for Adobe Photoshop CS2. It describes how to use the scanner through the Import Twain function from within Photoshop, so access to Adobe Photoshop
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
XI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
MAXYM Mortiser Operating Manual
MAXYM Mortiser Operating Manual Rev 2.112/16/02 Copyright MAXYM Technologies Inc. Table of Contents Visual Tour 1-2 Operating the Maxym Mortiser 3 Starting the Mortiser 3 Touch Screen Description 3 Mortise
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY CAPSULE PROGRAM Funded by NSF grant #0833636 Tutorial 02 3D Part Modeling SolidWorks 2010 Copyright 2010 Prof. Zeid 3D Part Modeling
Drawing a Plan of a Paper Airplane. Open a Plan of a Paper Airplane
Inventor 2014 Paper Airplane Drawing a Plan of a Paper Airplane In this activity, you ll create a 2D layout of a paper airplane. Please follow these directions carefully. When you have a question, reread
MN-ISD-A100-E ISD-A100 VIDEO MEASURING MICROSCOPE OPERATION MANUAL
MN-ISD-A100-E www. insize. com ISD-A100 VIDEO MEASURING MICROSCOPE OPERATION MANUAL V1 Description 1 2 ISD-A100 is a precise and excellent effective measuring instrument integrating optic, mechanic and
Working With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
Assignment 5 CAD Mechanical Part 1
Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started
Inventor-Parts-Tutorial By: Dor Ashur
Inventor-Parts-Tutorial By: Dor Ashur For Assignment: http://www.maelabs.ucsd.edu/mae3/assignments/cad/inventor_parts.pdf Open Autodesk Inventor: Start-> All Programs -> Autodesk -> Autodesk Inventor 2010
Finding Offsets for Multiple Spindles/Air Drills
888-680-4466 ShopBotTools.com Finding Offsets for Multiple Spindles/Air Drills Copyright 2016 ShopBot Tools, Inc. page 1 Copyright 2016 ShopBot Tools, Inc. page 2 Introduction This document explains how
SolidWorks Tutorial 1. Axis
SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to
1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry
2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply
Starting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
Name: Date Completed: Basic Inventor Skills I
Name: Date Completed: Basic Inventor Skills I 1. Sketch, dimension and extrude a basic shape i. Select New tab from toolbar. ii. Select Standard.ipt from dialogue box by double clicking on the icon. iii.
J. La Favre Fusion 360 Lesson 4 April 21, 2017
In this lesson, you will create an I-beam like the one in the image to the left. As you become more experienced in using CAD software, you will learn that there is usually more than one way to make a 3-D
Conversational CAM Manual
Legacy Woodworking Machinery CNC Turning & Milling Machines Conversational CAM Manual Legacy Woodworking Machinery 435 W. 1000 N. Springville, UT 84663 2 Content Conversational CAM Conversational CAM overview...
Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS
Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing
Foreword. If you have any questions about these tutorials, drop your mail to
Foreword The main objective of these tutorials is to give you a kick start using Solidworks. The approach to write this tutorial is based on what is the most important knowledge you should know and what
for Solidworks TRAINING GUIDE LESSON-9-CAD
for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working
Starting a New Drawing with a Title Block and Border
Starting a New Drawing with a Title Block and Border From the File menu select New. Within the New file menu toggle the option Drawing, name the file and turn Off the toggle Use Default Template. Select
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
Solidworks tutorial. drawing. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial drawing A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m The manufacturing techniques had a vast development during the past decades.
Toothbrush Holder Project 2D Machining
Toothbrush Holder Project 2D Machining Prerequisite Toothbrush Holder drawn and saved as a DXF file in SolidWorks Focus of the Lesson On completion of this exercise you will have: Used the Techsoft 2D
Anchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
PCB layout tutorial MultiSim/Ultiboard
PCB layout tutorial MultiSim/Ultiboard The basic steps in designing a PCB Paper design and prototype of the basic circuit. Identify the parts and the footprints that will be used. Make a circuit schematic,
AutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly.
Introduction - Teacher Notes Fig 1. The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Pro/DESKTOP enables pupils (and teachers) to communicate and model
Digital Camera Exercise
Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document
Principles and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
Creo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
PCB Layout. Date : 22 Dec 05. Prepare by : HK Sim Prepare by : HK Sim
PCB Layout Date : 22 Dec 05 Main steps from Schematic to PCB Move from schematic to PCB Define PCB size Bring component from schematic to PCB Move the components to the desire position Layout the path
NEORSD. Cad Standards and Procedures Manual
NEORSD Cad Standards and Procedures Manual This Manual is being provided to you on loan from the NEOSRD and is the property of the NEOSRD. Periodic updates will be provided and you are responsible for
When you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. create an engineering drawing file using the management file menu. 2. dimension the engineering file using the drawing annotation menu. 3. produce
Dimensioning the Bracket Problem
C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View
EG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
Creo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
EQ7 Summer Drawing Series: Block 4
EQ7 Summer Drawing Series: Block 4 www.doyoueq.com/blog Welcome to the Block 4 post for the EQ7 Summer Drawing Series! It s the last block in this drawing+sewing series and I hope you ve learned a lot
Part 2: Earpiece. Insert Protrusion (Internal Sketch) Hole Patterns Getting Started with Pro/ENGINEER Wildfire. Round extrusion.
Part 2: Earpiece 4 Round extrusion Radial pattern Chamfered edge To create this part, you'll use some of the same extrusion techniques you used in the lens part. The only difference in this part is that
METBD 110 Hands-On 17 Dimensioning Sketches
METBD 110 Hands-On 17 Dimensioning Sketches Why: Recall, Pro/E can capture design intent through the use of geometric constraints, dimensional constraints, and parametric relations. Dimensional constraints
Dimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 2D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
Engineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
Inventor Modeling Procedure By: Eric Small January 18, 2011
This document will out line the steps and procedures involved using Inventor to create Assemblies, Weldments, individual Parts, and Drawings. In order to outline the specific step to be taken, an understanding
AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
Kitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation
with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial
User Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
Advance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
SMALL OFFICE TUTORIAL
SMALL OFFICE TUTORIAL in this lesson you will get a down and dirty overview of the functionality of Revit Architecture. The very basics of creating walls, doors, windows, roofs, annotations and dimensioning.
Creo Extrude Tutorial 3: Hole, Fillets and Rounds
Creo Extrude Tutorial 3: Hole, Fillets and Rounds By: Matthew Jourden Brighton High School 1. Open Creo Parametric 2. File > Open > extrudetutorial (From Creo Extrude Tutorial 1) NOTE: Minimum of 2 other
Scribble Maps Tutorial
Scribble Maps Tutorial Go to the homepage of Scribble Maps here: h t t p : / / w w w. s c r i b b l e m a p s. c o m / Getting to know the Interface Scribble Maps is a free online mapping application with
Generations Automatic Stand-Alone Lace By Bernie Griffith Generations Software
We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A
ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc.
ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. WELCOME TO THE ILLUSTRATOR TUTORIAL FOR SCULPTURE DUMMIES! This tutorial sets you up for
AP Art History Flashcards Program
AP Art History Flashcards Program 1 AP Art History Flashcards Tutorial... 3 Getting to know the toolbar:... 4 Getting to know your editing toolbar:... 4 Adding a new card group... 5 What is the difference
Tutorial 2: Setting up the Drawing Environment
Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we
Create A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc
Create A Mug Skills Learned Settings Sketching 3-D Features Slice Line Tool Offset Arc Revolve Offset Plane Sweep Fillet Decal* Tutorial: Creating A Custom Mug There are somethings in this world that have
Create a Flowchart in Word
Create a Flowchart in Word A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships and
PCB Prototyping Machine FP-7A / FP-21A. User's Guide MITS Electronics
PCB Prototyping Machine FP-7A / FP-21A User's Guide MITS Electronics Revision 091210 Bug Fixed: require Acrobat Japanese font pack CONTENTS: Notes of Caution Connect Boardmaker to PC Install Software(mdp)
AutoCAD LT 2009 Tutorial
AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson
Create Fractions in Google Sketch up
Page1 Create Fractions in Google Sketch up Open the Plan View- Feet and Inches template from the start up screen. If you are already in sketch up you can switch to this view: Window>Preferences>Template
Pro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology
AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric
EXERCISE ONE: BEACH BUGGY.
EXERCISE ONE: BEACH BUGGY. Prerequisite knowledge Students should have completed Exercises from the file: Introduction to Assemblies Concept Mates Focus of lesson Commands Used This lesson will focus on
Tinker Tuesday Project - Wood Book Covers
Tinker Tuesday Project - Wood Book Covers 1. On the laser engraver computer, click on the folder icon on the task bar. Then, select Thaw Space and open the document titled Living Hinge Template. 2. Measure
QUICK TIPS GETTING STARTED
GETTING STARTED - Open the GenoPro program on your desktop and Press F to open the Family Wizard - Add the couple s information and then add children here by double clicking on the lines in the Children
Quick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
CAD Orientation (Mechanical and Architectural CAD)
Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all
Cube in a cube Fusion 360 tutorial
Cube in a cube Fusion 360 tutorial n Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually being done in the software. Click to link to the video tutorial.
How to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B
Chevy Malibu Vehicle Design with Solidworks Start SolidWorks Create a New SolidWorks Document Miles, Rowardo B 1 Click: Part and then OK Now you are ready to make a Part. 2 Right Toolbar: Document Properties:
Part 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
Lesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
Bottom Rail. Chapter 2. Chair. A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. B. 3D Sketch.
Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click
Autodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
How to Apply a Halftone Effect as a Photo Background Using CorelDRAW
How to Apply a Halftone Effect as a Photo Background Using CorelDRAW by Silvio Gomes CorelDRAW offers great tools for applying interesting effects that can really highlight the look of your art work. One
SolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
Activity 1 Modeling a Plastic Part
Activity 1 Modeling a Plastic Part In this activity, you will model a plastic part. When completed, your plastic part should look like the following two illustrations. While building this model, take time
5 TIPS FOR SPECIFYING PCB HOLE SIZE TOLERANCE
One of the more forgotten topics in PCB design are the holes through which components are mounted. Specifying the tolerance of hole dimensions in PCB fabrication ensures proper fit of plated-through-hole
Excel Tool: Plots of Data Sets
Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
Making Standard Note Blocks and Placing the Bracket in a Drawing Border
C h a p t e r 12 Making Standard Note Blocks and Placing the Bracket in a Drawing Border In this chapter, you will learn the following to World Class standards: Making standard mechanical notes Using the
Introduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
UNIT TWO: Data for Simple Calculations. Enter and format a title Modify font style and size Enter column headings Move data Edit data
UNIT TWO: Data for Simple Calculations T o p i c s : Enter and format a title Modify font style and size Enter column headings Move data Edit data I. Entering and Formatting Titles: The information used