Content. Flow meter F2-UN. Description Technical Data Dimension drawings Operation... 8 Mounting instructions...

Transcription

1

2 Flow meter Content F2-UN Description... 3 Technical data... 4 Dimension drawings... Operation... 8 Mounting instructions... 9 Order code F1-FP Description Technical Data Dimension drawings Order code F2-GF-TMS 300 Description... 1 Technical data Dimension drawings Order code F2-GF-TMS 00 Description Technical Data Dimension drawings Order code... 22

3 Flow meter volumes of conductive and nonconductive liquids. Swimming against the current requires more strength than with the current this is the simple fact on according to the phase difference process is based. The device has a compact design, and its wide range of possible applications means it can also be used in restricted spaces. The seal-free sensor design, with high-quality polysulfone (Ultrason S) combined with enclosure rating IP 67, not only makes it possible to use the device in harsh ambient conditions, but also guarantees high process reliability. The large text display also helps ensure simple, fast and problem-free commissioning. Flow sensor for conductive and nonconductive liquids No moving parts, compact design Process temperature up to 80 C, process pressure up to 10 bar High chemical resistance thanks to seal-free sensor design Large display with membrane keyboard Integrated teaching tube detection and conformance with FDA), CIP capable Adjustable measuring ranges, reduced number of variants Can be used fewer variants and lower storage costs Straight measuring tube reduces pressure loss, thus Sensor without seals increases process reliability and availability for all industries liquids compact design display easy-to-use up to 10 bar pressure closed operating interface.... page

4 Features Measuring principle Ultrasonic sensor Medium Fluids Nominal width measuring tube NW 10 / NW 1 / NW 20 / NW 2 Process temperature 0 C C Process pressure NW 10 und NW 1: Max. 10 bar / NW 20 und NW 2: Max. 6 bar EHEDG approval yes Performance NW10: 0.3 l/min NW1: 0.9 l/min NW20: 3. l/min NW2: l/min NW10: 21 l/min NW1: 36 l/min 6 NW20: 0 l/min NW2: 240 l/min Inlet zone NW10: 10 cm NW1: 30 cm NW20: 0 cm NW2: 80 cm Outlet zone NW10: 0 cm NW1: cm NW20: 10 cm NW2: 20 cm Conductivity No limitation Accuracy Reproducibility 0. % Resolution Mechanics Process connection: Wetted parts Housing material Weight Electronics NW 10 NW 1 NW 20 NW 2 PSU PSU G 1 / 2 G 3 / 4 G 1 G 1 1 / 4 1 / 2 NPT 3 / 4 NPT 1 NPT 1 1 / 4 NPT Clamp Clamp Clamp Clamp Supply voltage 1) 18 V DC V DC Ripple 2) Power consumption 3) Initialization time Protection class III Electrical connection, -pin /, 8-pin (depending on type) Electronics see order code Impuls/frequency output 0 khz khz Signal voltage Output current < 100 ma Load Response time 4) Enclosure rating IP 67 Output load < 00 Ohm Signal level Ambient data Ambient temperature 1) All connections are polarity protected. All outputs are overload and short-circuit protected. 2) May not exceed or fall short of VS tolerances. 3) Without load. 4) Analog output and display. 1 L 2 Q 3 4 Q 1 L 2 Q 3 4 Q2 Q 6 7 8

5 NW 10, process connection G 1/2 NW 1, process connection G 3/4 G 1/2 G 1/ (3.27) G 3/4 G 3/4.3 (3.32) 147 (.79) 12 (0.47) 147 (.79) 13.2 (0.2) All dimensions in mm (inch) All dimensions in mm (inch) NW 20, process connection G 1 NW 2, process connection G 1 1/4 G 1 G (3.70) G 1 1/4 G 1 1/ (3.88) 160 (6.30) 16.6 (0.6) 168 (6.61) 21 (0.83) All dimensions in mm (inch) All dimensions in mm (inch)

6 NW 10, Clamp (DIN ) NW 1, Clamp (DIN ) 34 (1.34) 34 (1.34) Clamp (DIN ) DN (3.74) 34 ( 1.34) 34 (1.34) Clamp (DIN ) DN (3.74) 149 (.87) 17 (0.67) 149 (.87) 17 (0.67) Dimensions in mm (inch) All dimensions in mm (inch) NW 20, Clamp (DIN ) NW 2, Clamp (DIN ) 0. ( 1.99) 0. ( 1.99) Clamp (DIN ) DN (4.0) 0. ( 1.99) 0. ( 1.99) Clamp (DIN ) DN (4.0) 162 (6.34) 2.2 (0.99) 170 (6.69) 2.2 (0.99) All dimensions in mm (inch) All dimensions in mm (inch)

7 NW 10, 1/2 NPT NW 1, 3/4 NPT 1/2" NPT 1/2" NPT 83.1 (3.27) 3/4" NPT 3/4" NPT.4 (3.32) 147 (.79) 12 (0.47) 147 (.79) 13.3 (0.2) All dimensions in mm (inch) All dimensions in mm (inch) NW 20, 1 NPT NW 2, 1 1/4 NPT 1" NPT 1" NPT 94.4 (3.72) 1 1/4" NPT 1 1/4" NPT 98.9 (3.89) 160 (6.30) 16.8 (0.66) 168 (6.61) 21.3 (0.) All dimensions in mm (inch) All dimensions in mm(inch)

8

9 Inlet and outlet paths

10 construction UN Tube size Sensor material 1 PSU black G1 N1 C1 Process connector Pipe thread G acc. to ISO 228 (Standard) Thread NPT Clamp (DIN ) BKS form A I0 SR Elektronik Current output, 1 transmitter output,, -pin (Standard) Current output, 2 transmitter output, 1 signal input,, 8-pin Bestellschlüssel UN 1

11

12

13

14

15

16

17

18

19

20

21

22

23