R76. MMKP Series R 7 6 -

Size: px

Start display at page:

Download "R76. MMKP Series R 7 6 -"

Pierce Chase
5 years ago
Views:

1 Loose Taped p = 7.5 p =10 15 p 27.5 p = 37.5 B 3,5 >3,5 all all all Ød± Product code system The part number, comprising 14 digits, is formed as follows: R Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: I = 250V M = 400V P = 630V Q = 1000V T = 1600V U = 2000V Digit 5 Pitch: D=7.5 mm; F=10mm; I=15mm; N=22.5mm; R=27.5mm; W=37.5mm. Digit 6 to 9 Digits indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pf. R76 Typical applications: deflection circuits in TV-sets (Scorrection and fly-back tuning) and monitors, switching spikes suppression in SMPS, lamp capacitor for electronic ballast and compact lamps, snubber and SCR commutating circuits, applications with high voltage and high current. Pitch Box thickness Maximum dimensions (mm) (mm) (mm) B max H max L max 7.5 All B +0.1 H +0.1 L All B +0.2 H +0.1 L <7.5 B +0.2 H +0.1 L B +0.2 H +0.1 L All B +0.2 H +0.1 L All B +0.2 H +0.1 L All B +0.3 H +0.1 L +0.3 GENERAL TECHNICAL DATA Dielectric:. Plates: polyester film. Winding: non-inductive type. Leads: for Ø 0,6mm : tinned wire for Ø = 0,5mm : tinned wire, low thermical conductivity Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer s logo, series (R76), code (MKP), capacitance, tolerance, D.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC Operating temperature range: -55 to +105 C Related documents: IEC Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13. Digit 14 Capacitance tolerance: H=2.5%; J=5%; K=10% Table 1 (for more detailed information, please refer to pages 14). Standard Lead length packaging style Taping style Ordering code P 2 Fig. Pitch (mm) (mm) (No.) (mm) (Digit 10 to 11) AMMO-PACK DQ AMMO-PACK /15.0 DQ AMMO-PACK DQ REEL Ø 355mm CK REEL Ø 355mm /15.0 GY REEL Ø 500mm /15.0 CK REEL Ø 500mm /27.5 CK Loose, short leads SE Loose, long leads (p<10mm) 17 +1/-2 Z3 Loose, long leads (p10mm) 18 +1/-1 JM Loose, long leads (p 15mm) / Note: Ammo-pack is the preferred packaging for taped version 09/

2 1 section (250Vdc) Rated 250Vdc / 180Vac Max 6800 pf E4 R76ID pf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76ID µf E4 R76IF µf E4 R76IF µf E4 R76IF µf E4 R76IF µf E4 R76IF µf E4 R76IF µf E4 R76IF µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II µf E4 R76II Tolerance: J (±5%); K (±10%) Rated 250Vdc / 180Vac Max 0.22 µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IN µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IR µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW µf E4 R76IW Tolerance: J (±5%); K (±10%) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values /2008

3 R76 1 section (400Vdc) Rated 400Vdc / 250Vac* Max 2700 pf E4 R76MD pf E4 R76MD pf E4 R76MD pf E4 R76MD pf E4 R76MD pf E4 R76MD pf E4 R76MD µf E4 R76MD µf E4 R76MD µf E4 R76MD µf E4 R76MD µf E4 R76MD µf E4 R76MD µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MF µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI µf E4 R76MI Rated 400Vdc / 250Vac* Max 0.12 µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MN µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MR µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW µf E4 R76MW Tolerance: J (±5%); K (±10%) Tolerance: J (±5%); K (±10%) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/

4 PRODUCT CODE: R76 Rated 630Vdc/250Vac* Max 680 pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD pf E4 R76PD µf E4 R76PD µf E4 R76PD Tolerance: J (±5%); K (±10%) 1 section (630Vdc/250Vac) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page145) /2008

5 PRODUCT CODE: R76 2 sections (630Vdc/400Vac) single sided metallized Rated Cap. 630Vdc / 400Vac Std dimensions Max dv/dt 3900 pf E4 R76PF pf E4 R76PF pf E4 R76PF pf E4 R76PF pf E4 R76PF µf E4 R76PF µf E4 R76PF µf E4 R76PF µf E4 R76PF µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PI µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN µf E4 R76PN Tolerance: H (±2.5%); J (±5%); K (±10%) Rated Cap. 630Vdc / 400Vac Std dimensions Max dv/dt 0.15 µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PR µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW µf E4 R76PW Tolerance: H (±2.5%); J (±5%); K (±10%) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 09/

6 Rated 1000Vdc / 400Vac Max 220 pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD pf E4 R76QD Tolerance: H (±2.5%)*; J (±5%); K (±10%) 2 sections (1000Vdc) single sided metallized Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage waveform and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Tolerance H (+2.5%) for C 1000pF /2008

7 2 sections (1000Vdc) single sided metallized Rated 1000Vdc / 600Vac Max 470 pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QF pf E4 R76QI pf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QI µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN µf E4 R76QN Tolerance: H (±2.5%)*; J (±5%); K (±10%) Rated 1000Vdc / 600Vac Max 0.10 µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QR µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW µf E4 R76QW Tolerance: H (±2.5%)*; J (±5%); K (±10%) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Tolerance H (+2.5%) for C 1000pF 09/

8 2 sections (1600Vdc) single sided metallized Rated 1600Vdc / 650Vac Max 3300 pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI pf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI µf E4 R76TI Tolerance: H (±2.5%); J (±5%); K (±10%) Rated 1600Vdc / 650Vac Max µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TN µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TR µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW µf E4 R76TW Tolerance: H (±2.5%); J (±5%); K (±10%) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values /2008

9 R76 2 sections (2000Vdc) Rated 2000Vdc / 700Vac Max 100 pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI pf E4 R76UI µf E4 R76UI µf E4 R76UI µf E4 R76UI µf E4 R76UI Tolerance: H (±2.5%)*; (J (±5%); K (±10%) All dimensions are in mm Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. **Tolerance H (±2.5%) for C 1000pF single sided metallized Rated 2000Vdc / 700Vac Max 1000 pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN pf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UN µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UR µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW µf E4 R76UW Tolerance: H (±2.5%); (J (±5%); K (±10%) 09/

10 electrical characteristics Rated voltage (V R ): 250Vdc Vdc - 630Vdc 630Vdc Vdc Vdc Vdc Rated temperature (T R ): +85 C for V R (d.c.) +75 C for V R (a.c.) for 1 section for 2 sections. Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85 C to +105 C: 1.25% per C for V R (d.c.). +75 C to +105 C: 1.35% per C for V R (a.c.) Capacitance range: 680pF to 15µF 1 section 100pF to 5.6µF 2 sections Capacitance values: E12 series (IEC Norm). Capacitance tolerances (measured at 1 khz): ±5% (J); ±10% (K) for C<1000pF ±2.5% (H); ±5% (J); ±10% (K); for C 1000pF Total self-inductance (L): (Lead length ~2 mm) Pitch (mm) L (nh) Dissipation factor (DF): tgδx10-4 at +25 C ±5 C khz C 0.1µF 0.1µF<C 1.0µF C>1µF Insulation resistance: Test conditions Temperature: +25 C±5 C Voltage charge time: 1 min Voltage charge: 100Vdc Performance 1x10 5 MΩ for C 0.33µF (5x10 5 MΩ)* s for C>0.33µF ( s)* * Typical value. Test voltage between terminations: 1.6xV R applied for 2 s at +25 C±5 C 4 test method and performance Damp heat, steady state: Test conditions Temperature: +40 C±2 C Relative humidity (RH): 93% ±2% Test duration: 56 days Performance Capacitance change C/C : 2% DF change ( tgδ): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: +85 C±2 C 2000 h 1.25xV R (d.c.) Performance Capacitance change C/C : 2% DF change ( tgδ): 10x10-4 at 110kHz for C 1µF 10x10-4 at 111kHz for C>1µF Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260 C±5 C Dipping time (with heat screen):10 s±1 s Performance Capacitance change C/C : 1% DF change ( tgδ): 10x10-4 at 110kHz for C 1µF 10x10-4 at 111kHz for C>1µF Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change C/C : 0.5% /2008

11 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) Note: p (pitch) in mm. 09/

12 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) Note: p (pitch) in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.

13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kemet: R76TR3100SE30J

R75. MKP Series HIGH PERFORMANCES R /2008

R75. MKP Series HIGH PERFORMANCES R /2008 Loose Taped Fig. 1 Fig. 2 Fig. 3 R75 Typical applications: deflection circuits in TV-sets and monitors (S-correction), resonant capacitor in electronic ballast and compact lamp, power factor correction