National Certificate in Textiles Manufacture (Advanced Operations) (Level 3) with strands in Textile Processing, and Textile Testing Level 3
|
|
- Albert Chambers
- 5 years ago
- Views:
Transcription
1 NZQF NQ Ref 1122 Version 4 Page 1 of 10 National Certificate in Textiles Manufacture (Advanced Operations) (Level 3) with strands in Textile Processing, and Textile Testing Level 3 Credits 61 or 64 depending on strand This qualification has been reviewed. The last date to meet the requirements is 31 December Transition Arrangements This qualification was republished to extend the last date of entry to 31 December This qualification has been reviewed and replaced by the New Zealand Certificate in Textile Manufacturing (Level 4) with optional strands in Technical Leadership [Ref: 2978]. The last date for entry into programmes leading to this qualification is 31 December It is anticipated that no existing candidates will be disadvantaged by these transition arrangements. However, anyone who feels that they have been disadvantaged may appeal to at the address below. Appeals will be considered on a case by case basis. For detailed information see Review Summaries on the NZQA website. NZQF National Qualification Registration Information Process Version Date Last Date for Assessment Registration 1 September 2004 December 2010 Revision 2 August 2006 December 2019 Revision 3 October 2010 December 2019 Review 4 October 2015 December 2019 Republication 4 August 2016 December 2019 Standard Setting Body PO Box 9005 Newmarket Auckland 1149 Telephone Fax info@competenz.org.nz Website
2 NZQF NQ Ref 1122 Version 4 Page 2 of 10 National Certificate in Textiles Manufacture (Advanced Operations) (Level 3) with strands in Textile Processing, and Textile Testing Level 3 Credits 61 or 64 depending on strand Purpose This certificate recognises advanced knowledge and skills in textile manufacturing, and it is a pathway to further education and training. The core compulsory section covers the underpinning knowledge and skills required safe working practices, and knowledge of the raw materials and processes of textile manufacturing. The core elective enables candidates to select appropriate standards from anywhere on the New Zealand Qualifications Framework to support their learning. Specialised skills in Textile Processing or Textile Testing are recognised in the strands. Successful completion of the qualification may lead to other specialised qualifications such as the National Certificate in Textiles Manufacture (Fibre Blending) (Level 4) with strands in Woollen Processing, and Semi-worsted and Worsted Processing [Ref: 0151], National Certificate in Textiles Manufacture (Woven Fabric Technology) (Level 5) with strands in Weaving Technology, and Finishing Technology [Ref: 0154], National Diploma in Textiles Manufacture (Weaving) (Level 5) [Ref: 0152], or National Diploma in Textiles Manufacture (Woollen Yarn Processing) (Level 5) [Ref: 0153]. Special Notes This qualification and the National Certificate in Textiles Manufacture (Operations) (Level 2) [Ref: 1121] replaced the National Certificates in Textiles Manufacture [Ref: ; ; 0916]. Credit Range Core Compulsory Core Elective Textile Processing Strand Level 1 credits Level 2 credits Level 3 or above credits Minimum totals Textile Testing Strand
3 NZQF NQ Ref 1122 Version 4 Page 3 of 10 Requirements for Award of Qualification Award of NZQF National Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Core Compulsory standards Core Elective A minimum of 10 credits as specified One of the following strands is required Textile Processing Strand Textile Testing Strand Detailed Requirements Core Compulsory The following standards are required Manufacturing > Manufacturing Skills > Apparel and Textile Manufacturing - Workplace Skills Demonstrate knowledge of safe working practices in the apparel or textile industry 2 6 Manufacturing > Textiles Manufacture > Core Yarn Processing 5876 Demonstrate knowledge of natural textile fibres Demonstrate knowledge of manufactured textile fibres Demonstrate knowledge of spun yarns 3 10 Core Elective A minimum of 10 credits From anywhere on the DAS
4 NZQF NQ Ref 1122 Version 4 Page 4 of 10 Textile Processing Strand A minimum of 18 credits Manufacturing > Textiles Manufacture > Core Yarn Processing 4179 Set up a blending system to process textile fibres Set up a ring twisting machine to twist yarn Set up a 2 for 1 twisting machine to twist yarn Set up a hollow spindle twisting machine to twist fancy 3 8 yarn 4193 Set up a reeling machine to reel yarn Set up a winding machine to wind yarn Set up a wrap spinning machine to spin yarn Set up an assembly winding machine to wind yarn Set up and monitor a continuous heat setting line 4 24 Manufacturing > Textiles Manufacture > Fabric Finishing 2913 Mill fabric Apply chemicals to fabric by padding 3 3 Manufacturing > Textiles Manufacture > Non-Woven Textile Processing Prepare fibre blend for mechanically needled production Describe the process of and produce carded batting for mechanically needled products Describe the processes and machinery used and carry out mechanical needling operation from batts Describe the processes and machinery used and structure velour operations for non-woven textiles Describe the processes and machinery used and structure rib operations for non-woven textiles Describe the processes and machinery used and structure rib-patterning for non-woven textiles Describe the process of and produce stentered nonwoven textiles with and without latex
5 NZQF NQ Ref 1122 Version 4 Page 5 of 10 Manufacturing > Textiles Manufacture > Textile Dyeing and Finishing 2912 Scour fabric 3 9 Manufacturing > Textiles Manufacture > Top Making, Semi-Worsted and Worsted Processing 3130 Set-up semi-worsted or worsted card to card fibre Set-up a gilling machine to gill sliver or top Set-up a combing machine to comb top Set-up roving machine to process slivers Set-up a semi-worsted or worsted spinning machine to 4 12 spin yarn 3145 Set-up a balling machine to process yarn 3 6 Manufacturing > Textiles Manufacture > Weaving 2897 Demonstrate knowledge of woven fabrics Prepare a loom for weaving Identify faults in woven fabric Mend faults in woven fabric Perform quality tests on fabric Prepare a loom for narrow weaving 3 5 Manufacturing > Textiles Manufacture > Woollen Yarn Processing 4163 Card fibre on a woollen card Set up a woollen card to card fibre Set up a woollen spinning machine to spin yarn Set up a mule spinning machine to spin yarn Set up and monitor a tapescour Process yarn in a Twistset machine Set up and monitor a Twistset machine 4 24
6 NZQF NQ Ref 1122 Version 4 Page 6 of 10 Textile Testing Strand A minimum of 15 credits Manufacturing > Textiles Manufacture > Carpet Manufacture 7201 Perform quality tests on unbacked tufted carpet Perform quality tests on backed and unbacked woven carpet 7239 Perform quality tests on backed and finished tufted carpet Manufacturing > Textiles Manufacture > Core Yarn Processing 5470 Perform tests on finished or partly processed yarn 3 18 Manufacturing > Textiles Manufacture > Fabric Finishing 2923 Inspect finished woven broadloom fabric 3 9 Manufacturing > Textiles Manufacture > Textile Dyeing and Finishing 5385 Carry out visual shade checks on textiles Perform tests on dyed and finished textile materials 3 18 Manufacturing > Textiles Manufacture > Top Making, Semi-Worsted and Worsted Processing 3136 Test sliver and top 3 6 Manufacturing > Textiles Manufacture > Weaving 2908 Perform quality tests on fabric 3 5
7 NZQF NQ Ref 1122 Version 4 Page 7 of 10 Transition Arrangements Version 3 Version 3 was issued following the review of standards in the Fabric Finishing and Woollen Yarn Processing domains. Changes to structure and content New Unit 26001, Set up and monitor a continuous heat setting line, was added to the Textile Processing Strand. Standard 2912 was reclassified from the Fabric Finishing domain to the Textile Dyeing and Finishing domain. The level and credit value of standard 2913 changed from Level 4, 24 credits to Level 3, 12 credits. Expiring standard 2916 was removed. The titles of standards 4174 and 4175 were updated. For detailed information see Review Summaries on the NZQA website. People currently enrolled in programmes leading towards the award of version 2 of this qualification may either complete that version, or transfer to version 3. The last date for entry to training programmes or courses leading to the award of version 1 is 31 December It is anticipated that no existing candidates are disadvantaged by these transition arrangements. However, candidates may appeal in the first instance to, at the address below, which will consider an appeal on a case-by-case basis. Previous versions of the qualification Version 2 was issued following the introduction of the Non-Woven Textiles domain to the NQF. Changes to structure and content Level 3 and 4 unit standards in the Non-Woven Textiles Domain were added as options in the Textile Processing Strand of the qualification. Total credits have not changed. People currently enrolled in programmes leading towards the award of version 1 of this qualification may either complete that version, or transfer to version 2. The last date for entry to training programmes or courses leading to the award of version 1 is 31 December It is anticipated that no existing candidates are disadvantaged by these transition arrangements. However, candidates may appeal in the first instance to, which will consider an appeal on a case-by-case basis.
8 NZQF NQ Ref 1122 Version 4 Page 8 of 10 does not intend that any existing candidate be disadvantaged by this review. However, any candidate who feels that they have been disadvantaged by the transition should contact at the address below. The replaced qualifications will continue to be recognised by industry and there is no requirement for existing holders to complete the new qualifications. Version 1 of this qualification and the National Certificate in Textiles Manufacture (Operations) (Level 2) [Ref: 1121] replaced the following qualifications: National Certificate in Textiles Manufacture (Fibre Blending) (Level 2) [Ref: 0142] National Certificate in Textiles Manufacture (Semi-Worsted and Worsted) (Level 2) with strands in Worsted Carding, Gilling, Combing, Roving, Backwash Operation, Ring Spinning, and Wrap Spinning [Ref: 0143] National Certificate in Textiles Manufacture (Woollen Spinning) (Level 2) with strands in Ring Spinning and Mule Spinning [Ref: 0144] National Certificate in Textiles Manufacture (Yarn Processing) (Level 2) with strands in Ring Twisting, 2 for 1 Twisting, Hollow Spindle Twisting, Reeling, Winding, Balling and Brushing, Tape Scouring, and Autoclaving [Ref: 0145] National Certificate in Textiles Manufacture (Woven Fabric) (Level 2) with strands in Warping, Weaving, Mending, and Dry Finishing [Ref: 0146] National Certificate in Textiles Manufacture (Chemset Operation) (Level 3) [Ref: 0148] National Certificate in Textiles Manufacture (Wet Woven Fabric Finishing) (Level 3) [Ref: 0149] National Certificate in Textiles Manufacture (Woollen Carding) (Level 3) [Ref: 0150] National Certificate in Textiles Manufacture (Textile Testing) (Level 2) [Ref: 0916]. Changes to structure and content included unit standard 497 removed; unit standards 5876, 5877 and 5878 are included in this level 3 qualification; the two strands cover all sectors previously covered individually by the replaced qualifications; the core elective allows for the selection of credits from anywhere on the NQF; the maximum of 5 elective credits from the Textiles Manufacture subfield has been removed; the minimum total credits have been reduced from to 61 or 64. People currently enrolled in a programme leading to the award of a replaced textile qualification may either complete that qualification or transfer to either of the replacement qualifications. The last date for people to complete the replaced qualifications was 30 December Certification This certificate will display the logos of NZQA, and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited).
9 NZQF NQ Ref 1122 Version 4 Page 9 of 10 Classification This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 194 Manufacturing > Textiles Manufacture Engineering and Related Technologies > Manufacturing, Engineering and Technology > Textile Making Quality Management Systems Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard.
10 NZQF NQ Ref 1122 Version 4 Page 10 of 10 Prerequisite Diagram
This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 1310 Version 5 Page 1 of 8 National Certificate in Wood Fibre Manufacturing (Wood Panels) with strands in Composite Panel Manufacturing, Overlay Bonding, and Laminated Veneer Lumber (LVL) and
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More informationNational Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3
NZQF NQ Ref 1336 Version 2 Page 1 of 6 National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3 Credits 74-98 This qualification
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1504 Version 2 Page 1 of 14 National Certificate in Furniture (Level 4) with strands in Furniture Design and Markets, Craft Finisher, Machine Setter, Furniture Maker, Advanced Upholstery, and
More informationNZQF NQ Ref 1262 Version 3 Page 1 of 22
NZQF NQ Ref 1262 Version 3 Page 1 of 22 National Certificate in (Level 4) with strands in Fitting and Machining, General Engineering, Machining, Maintenance Engineering,, and Electricity Supply Level 4
More informationNational Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
More informationPage 1 of 5. Manufacturing
Page 1 of 5 Field Manufacturing Change of Standard Setting Body (SSB) responsibility and republication of unit standards, qualifications and CMR s developed by Apparel and Textile Industry Training Organisation,
More informationDemonstrate knowledge of woollen carding and spinning technology
Page 1 of 5 Demonstrate knowledge of woollen carding and spinning technology Level 5 Credits 20 Purpose People credited with this unit standard are able to demonstrate knowledge of: the nature and use
More informationImagery Electronic Multimedia Radio , , 10224, , , , 10319, 10320
Page 1 of 6 FIELD ARTS AND CRAFTS Review of Electronic Media qualifications and unit standards Qualifications Qualification title Reference National Certificate in Radio (Announcing) 0296 National Certificate
More informationLearners will continue to develop and grow as valued employees and demonstrate skills that contribute to lifelong learning.
NZQF NQ Ref 0231 Version 13 Page 1 of 18 National Certificate in Employment Skills Level 1 Credits 60 Purpose The National Certificate in Employment Skills (NCES) recognises core skills and attributes
More informationDO NOT TURN OVER THE PAGE UNTIL YOU ARE TOLD TO DO SO
ADVANCED DIPLOMA IN KNITWEAR STUDIES AND MERCHANDISING ADVANCED DIPLOMA IN APPAREL STUDIES AND MERCHANDISING Examination Paper 2 nd Term 2014 Module Name: Textile Materials and Evaluation Module Code:
More informationReview of Technology Level 3 achievement and Level 3 and 4 unit standards. Graphics Design Graphic Communication
Page 1 of 18 Fields Engineering and and Sciences Review of Level 3 achievement and Level 3 and 4 unit standards Unit standards Field Subfield Domain ID Engineering and Design Design Computer 19355 Graphics
More informationDemonstrate knowledge of the cam actions of weft-knitting latch needle machines
Page 1 of 5 Demonstrate knowledge of the cam actions of weft-knitting latch needle machines Level 3 Credits 7 Purpose This unit standard is for mechanics of all types of weft-knitting machines that use
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Visual Merchandiser
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationDRAFT SYLLABUS FOR THE TRADE OF WEAVING OF SILK & WOOLEN FABRICS (SEMESTER PATTERN)UNDER CRAFTSMEN TRAINING SCHEME (CTS) GENERAL INFORMATION
DRAFT SYLLABUS FOR THE TRADE OF WEAVING OF SILK & WOOLEN FABRICS (SEMESTER PATTERN)UNDER CRAFTSMEN TRAINING SCHEME (CTS) GENERAL INFORMATION 1. Name of the Trade : WEAVING OF SILK & WOOLEN FABRICS 2. N.C.O.
More informationNZQA registered unit standard version 6 Page 1 of 5. Grind finger jointer cutterhead in solid wood manufacturing
Page 1 of 5 Title Grind finger jointer cutterhead in solid wood manufacturing Level 4 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with grinding a finger
More informationMake and fit a roof frame and panels to a vehicle in the coachbuilding industry
Page 1 of 5 Make and fit a roof frame and panels to a vehicle in the coachbuilding industry Level 4 Credits 6 Purpose This unit standard is for people who work in the coachbuilding industry. People credited
More informationFURNITURE FINISHING French polish for furniture finishing
1 of 7 level: 5 credit: 20 planned review date: September 2004 sub-field: purpose: entry information: accreditation option: moderation option: Furniture People credited with this unit standard are able
More informationCoordinate finger jointer operations in solid wood manufacturing
Coordinate finger jointer operations in solid wood manufacturing 4547 version 5 Page 1 of 5 Level 4 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of finger
More informationLESSON 6 PRODUCTION OF FANCY YARNS STRUCTURE 6.0 OBJECTIVES 6.1 INTRODUCTION 6.2 STRUCTURE OF FANCY YARNS 6.3 SOME EXAMPLES OF FANCY YARNS
LESSON 6 PRODUCTION OF FANCY YARNS STRUCTURE 6.0 OBJECTIVES 6.1 INTRODUCTION 6.2 STRUCTURE OF FANCY YARNS 6.3 SOME EXAMPLES OF FANCY YARNS 6.4 MANIPULATION OF FIBRE CHARACTERISTICS 6.5 MANIPULATION OF
More informationFOOTWEAR Specify non-leather materials used in footwear uppers
1 of 5 level: 4 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with
More informationby Ezio Carissoni Stefanno Dotti Franco Fleiss Luigi Petaccia Lucia Pieri
by Ezio Carissoni Stefanno Dotti Franco Fleiss Luigi Petaccia Lucia Pieri Ente Morale dell'associazione Costruttori Italiani di Macchinario per l Industria Tessile Moral body of the Italian Association
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Use marine radar on a restricted limits vessel Level 3 Credits 10 Purpose People credited with this unit standard are able to: relate the operating principles and conditions of marine
More informationNZQA registered unit standard version 1 Page 1 of 6. Manufacture precast concrete beams and columns
Page 1 of 6 Title Manufacture precast concrete beams and columns Level 3 Credits 25 Purpose People credited with this unit standard are able to: prepare, set up moulds and storage areas, carry out the
More informationSet up a timber planer for dress four sides
Page 1 of 6 Set up a timber planer for dress four sides Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting the finished quality of
More informationCourse Title: Elements of Textile Technology (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Elements of Textile Technology (Code: 3312801) Diploma Programmes in which this course is offered Textile Processing
More informationNZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of structural precast concrete element manufacture
Page 1 of 6 Title Demonstrate knowledge of structural precast concrete element manufacture Level 3 Credits 25 Purpose People credited with this unit standard are able to demonstrate knowledge of: preparation,
More informationOverview of the Course
E -Learning Course for Cotton Fiber Testing and Processing Overview of the Course This E-Learning Course is a team work training for Process Improvement and Cost Reductions for Spinning and Ginning Mills.
More informationRecognition of prior learning (RPL)
Recognition of prior learning (RPL) Helping mature learners gain trades qualifications What is RPL? Over your career, you ve gained knowledge, skills and experience. This might be enough to obtain a current
More informationHours L S E A TOTAL
Curriculum 1 st year Subject Hours L S E A ECTS 1 st semester 450 30 Information technologies 30 0 30 0 60 4 Aesthetics of textiles and clothing 30 30 0 0 60 4 English for specific purposes 0 60 0 0 60
More informationNZQA registered unit standard version 3 Page 1 of 6
Page 1 of 6 Title Demonstrate knowledge of technology and processes for laminated veneer lumber and plywood manufacture Level 3 Credits 10 Purpose People credited with this unit standard are able to demonstrate
More informationNZQA registered unit standard version 2 Page 1 of 8. Demonstrate knowledge of theory for registration of electrical installers
Page 1 of 8 Title Demonstrate knowledge of theory for registration of electrical installers Level 3 Credits 3 Purpose This unit standard covers the theory assessment required for registration as an electrical
More informationDemonstrate industry knowledge for reel-fed printing
Page 1 of 6 Demonstrate industry knowledge for reel-fed printing Level 3 Credits 15 Purpose People credited with this unit standard are able to, for reel-fed printing, demonstrate knowledge of: halftones;
More informationFibre to fabric. Gary Robinson Wool industry consultant
Fibre to fabric Gary Robinson Wool industry consultant The transformation of raw wool to fabric Zegna Photograph courtesy of AWI. Some issues for wool processing The random limit to fibre control Controlling
More informationOperate the game of baccarat
Page 1 of 5 Operate the game of baccarat Level 3 Credits 8 Purpose People credited with this unit standard are able to, for the game of baccarat: interpret and apply terms commonly used in the game; open
More informationDemonstrate knowledge of electrical theory for Electrical Service Technicians A
Demonstrate knowledge of electrical theory for Electrical Service Technicians A 10933 version 4 Page 1 of 7 Level 3 Credits 4 Purpose 'Electrical Service Technician A' (EST A) refers to a class of electrical
More informationInternational Correspondence Schools Publications on Weaving and Textile Manufacture
International Correspondence Schools Publications on Weaving and Textile Manufacture International Correspondence Schools Starting in the 1890s the International Correspondence Schools (ICS) published
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate and apply knowledge of single-phase and three-phase transformers
Page 1 of 5 Title Demonstrate and apply knowledge of single-phase and three-phase transformers Level 4 Credits 4 Purpose This unit standard is for people in the electrical and related trades and covers
More informationTEXTILE ENGG. DEPT. Course Outcomes of all Courses. Four Year Degree Course in Bachelor of Textile Engineering SEMESTER: THIRD
TEXTILE ENGG. DEPT. Course Outcomes of all Courses Four Year Degree Course in Bachelor of Textile Engineering SEMESTER: THIRD 3 TX 01 - Yarn Manufacturing I Co1 Understand the technology and process parameters
More informationWoollen Spinning, Weaving, Knitting, Dyeing, Bleaching and Printing Technology Handbook
Woollen Spinning, Weaving, Knitting, Dyeing, Bleaching and Printing Technology Handbook Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331171 Code: NI215 Pages: 496 Price:
More informationL_All_Vocational_Ed_Textile. Sector: Textile
L_All_Vocational_Ed_Textile Sector: Textile S.No Specialization Page No. 1 Carpet Technology 2-12 2 Chemical Processing 13-29 3 Khadi Manufacturing 30-43 4 Spinning 44-61 5 Weaving 62-81 1 NATIONAL VOCATIONAL
More informationUSTER LABORATORY SYSTEMS
USTER LABORATORY SYSTEMS APPLICATION REPORT Improved analysis of yarns in the laboratory THE STANDARD FROM FIBER TO FABRIC Richard Furter Novmeber 2007 SE 611 Copyright 2007 by Uster Technologies AG All
More informationWhat happens to my fleece? What products can I get from it?
What happens to my fleece? What products can I get from it? The following pictures show, roughly in order, all the processes from raw, greasy fleece to finished products and we describe what goes on, from
More informationNZQA registered unit standard version 7 Page 1 of 5. Demonstrate knowledge of basic electronic components
Page 1 of 5 Title Demonstrate knowledge of basic electronic components Level 2 Credits 5 Purpose This unit standard is intended for use in high school or preemployment electronics courses, or in the training
More informationTABLE OF CONTENTS. Sr no Contents Page no. 1. Basic textiles terms Sizing Sequence of operations in weaving 2
TABLE OF CONTENTS Sr no Contents Page no. 1. Basic textiles terms 1 2. Sizing 1 3. Sequence of operations in weaving 2 4. Identification of sizing machine parts 2 5. Objectives of sizing 2 6. Operations
More informationNZQA registered unit standard version 5 Page 1 of 5. Apply electromagnetic theory to a range of problems
Page 1 of 5 Title Apply electromagnetic theory to a range of problems Level 2 Credits 5 Purpose This unit standard covers knowledge of electromagnetism theory and is intended for people working in or intending
More informationCHAPTER 6 Raw Material, Quality and Usage Pattern
CHAPTER 6 Raw Material, Quality and Usage Pattern Most of the textile production in the state is made out of cotton yarns and, therefore, cotton yarn is the dominant raw material. The usage of manmade
More informationAIR JET SPINNING OF COTTON YARNS
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1001 AIR JET SPINNING OF COTTON YARNS 2004 Cotton Incorporated. All rights reserved; America s Cotton Producers
More informationDemonstrate knowledge of electronic components and their application in the automotive industry
Page 1 of 5 Demonstrate knowledge of electronic components and their application in the automotive industry Level 3 Credits 5 Purpose This theory-based unit standard is for people in the automotive repair
More informationSubjects of Textile Engineering department
Subjects of Textile Engineering department Class Course Name (Even Semester) Code Final Year Technical Textile 8TX05 (VIII Sem) Process Control In Textile Manufacturing 8TX01 Chemical Processing - II 8TX03
More informationNZQA registered unit standard 4546 version 8 Page 1 of 6
Page 1 of 6 Title Feed and tail out finger jointer Level 3 Credits 6 Purpose People credited with this unit standard are able to: manage health and safety when feeding and tailing out a finger jointer;
More informationWet Processing I (Pretreatment) 1. INTRODUCTION. [Here, * = Reference of Moshiour Rahman.] Q. Define wet processing. Describe its main divisions.
[Here, * = Reference of Moshiour Rahman.] 1. INTRODUCTION Q. Define wet processing. Describe its main divisions. The process by which the textile mtls are treated associated with water is called wet processing.
More informationWOOL4SCHOOL wool4school.com. wool4school.com
MEDIA KIT AUSTRALIA WOOL4SCHOOL In keeping with a long tradition of supporting individual excellence in textile and design, The Woolmark Company s annual student design competition Wool4School encourages
More informationTextile Merit Badge Workbook
Merit Badge Workbook This workbook can help you but you still need to read the merit badge pamphlet. This Workbook can help you organize your thoughts as you prepare to meet with your merit badge counselor.
More informationTypes of Yarns UNIT. Structure. Learning Objectives. Unit Preview
162 Fashion Garment Making UNIT 8 Structure 8.0 Introduction 8.1 Production of yarns 8.2 Classification of Yarns 8.3 Yarn fineness Count, Denier 8.4 Yarn Twist Learning Objectives To understand the production
More informationNZQA registered unit standard 764 version 7 Page 1 of 6. Explain a separation and standardisation process in a dairy processing operation
Page 1 of 6 Title Explain a separation and standardisation process in a dairy processing operation Level 5 Credits 20 Purpose This theory-based unit standard is for experienced people carrying out milk
More informationNZQA registered unit standard version 4 Page 1 of 6. Demonstrate knowledge of alternating current (a.c.) theory
Page 1 of 6 Title Demonstrate knowledge of alternating current (a.c.) theory Level 4 Credits 7 Purpose This unit standard covers knowledge of basic a.c. theory for electricians and related trades. People
More information1. Ascertain the meaning of the words used in heading 14.04, and 53.11
Academic initiatives Business thought leadership Collaborative partnership to advance people capital in the int l logistical value chain Date Tariff Determination Section SARS CUSTOMS Durban Dear Sir/Madam,
More informationYear 11 Revision Tasks
Year 11 Revision Tasks Choosing Fabrics and Fibres page 10-23 1. Watch Fibres DVD and make notes of important points about fibre source, process and properties. 2. Write out the general properties, advantages
More informationDIPLOMA IN APPAREL DESIGN AND FABRICATION TECHNOLOGY THIRD SEMESTER
DIPLOMA IN APPAREL DESIGN AND FABRICATION TECHNOLOGY THIRD SEMESTER Course Title: FABRIC STRUCTURE Credits (L:T:P) : 4:0:0 Total Contact Hours: 52 Course Code: 15FT34T Credit :04 Type of Course: Lectures,
More informationTechnology Gap within Kenyan Textile Cottage Industries
Technology Gap within Kenyan Textile Cottage Industries S. Odhiambo, D. Njuguna, P. Chemweno, J. Githaiga Moi University School of Engineering Department of Manufacturing, Industrial & Textile Engineering
More informationNational Standard of the People s Republic of China. Conventional Moisture Regains of Textiles
ICS 59.080.01 W04 GB National Standard of the People s Republic of China GB 9994 (Replacing GB 9994-1988) Conventional Moisture Regains of Textiles (For approval) Published: xx-xx-xxxx Implemented: xx-xx-xxxx
More informationLearn to felt. wet felting
Learn to felt wet felting WET FELTING 01 02 FLAT FELTING It s simple and easy to make a piece of flat felt. To learn how just follow these steps. Make 6 pieces of flat felt to use as placemats for your
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919)
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1015 RANDOM SLUB RING YARN PRODUCTION ON CONVENTIONAL EQUIPMENT 2004 Cotton Incorporated. All rights reserved;
More informationYarn Testing. Table Of Contents. 1.0 Yarn Count 2.0 Yarn Twist 1.1 Yarn Count Variation 2.1 Twist Standards 1.2 Conversion Table For Yarn Counts
Yarn Testing Yarn occupies the intermediate position in the production of fabric from raw material. Yarn results are very essential, both for estimating the quality of raw material and for controlling
More information9. Spinning. Errol Wood
9. Spinning Errol Wood Learning objectives On completion of this topic you should be able to: Describe the preparation of the materials required for the three main spinning systems Explain the purpose
More informationDIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits)
DIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits) SAQA ID: 100951, CHE NUMBER: H16/14237/HEQSF Campus where offered: Arts Campus REMARKS a. Admission requirement(s)
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of bitumen handbar sprayers and operations
Page 1 of 5 Title Demonstrate knowledge of bitumen handbar sprayers and operations Level 3 Credits 5 Purpose This unit standard is for people working in the pavement surfacing industry. People credited
More informationTextiles and Design. Stage 6. Syllabus
Textiles and Design Stage 6 Syllabus Original published version updated: April 2000 Board Bulletin/Offical Notices Vol 9 No 2 (BOS 13/00) November 2000 Board Bulletin/Offical Notices Vol 9 No 8 (BOS 58/00)
More informationYarn Formation 2/18/2010 OBJECTIVES CHAPTER 7 YARN BASED ON FIBER LENGTH FILAMENT YARNS
OBJECTIVES Yarn Formation CHAPTER 7 What is a yarn? What are the different types of yarns available? How are yarns made? How YARN A continuous strand of textile fibers, filaments, or material in a form
More information2003 H I G H E R S C H O O L C E R T I F I C A T E E X A M I N A T I O N
2003 HIGHER SCHOOL CERTIFICATE EXAMINATION Textiles and Design Total marks 50 General Instructions Reading time 5 minutes Working time 1 1 2 hours Write using black or blue pen Write your Centre Number
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply fundamental knowledge of electrical circuit engineering principles
Page 1 of 5 Title Demonstrate and apply fundamental knowledge of electrical circuit engineering principles Level 3 Credits 15 Purpose This unit standard covers general fundamental electrical circuit theory
More informationNZQA registered unit standard version 4 Page 1 of 5. Plan, construct, modify, and report on an electronic prototype
Page 1 of 5 Title Plan, construct, modify, and report on an electronic prototype Level 3 Credits 6 Purpose This unit standard is intended for use in a senior secondary school environment, pre-employment
More informationPROGRESS REPORT QCTO QUALIFICATIONS DEVELOPMENT
PROGRESS REPORT QCTO QUALIFICATIONS DEVELOPMENT Date: 6 November 2014 Attention: All FP&M SETA Stakeholders INTRODUCTION & BACKGROUND In anticipation of the phasing-out of all SAQA registered occupational
More information1. Overview of Early Stage Wool Processing
1. Overview of Early Stage Wool Processing David Cottle & Errol Wood Learning objectives On completion of this topic you should be able to: Outline the main wool processing systems, from greasy wool through
More informationHIGHER SCHOOL CERTIFICATE EXAMINATION TEXTILES AND DESIGN 2/3 UNIT (COMMON) Time allowed Three hours (Plus 5 minutes reading time)
HIGHER SCHOOL CERTIFICATE EXAMINATION 2000 TEXTILES AND DESIGN 2/3 UNIT (COMMON) Time allowed Three hours (Plus 5 minutes reading time) DIRECTIONS TO CANDIDATES This paper is divided into THREE sections.
More informationHIGHER SCHOOL CERTIFICATE EXAMINATION TEXTILES AND DESIGN 2/3 UNIT (COMMON) Time allowed Three hours (Plus 5 minutes reading time)
HIGHER SCHOOL CERTIFICATE EXAMINATION 1999 TEXTILES AND DESIGN 2/3 UNIT (COMMON) Time allowed Three hours (Plus 5 minutes reading time) DIRECTIONS TO CANDIDATES This paper is divided into THREE sections.
More informationCONTENTS 1. Introduction
HAND SPINNING CONTENTS 1. Introduction 1.1. History 2. Regions of Production 3. Producer Communities 4. Raw Materials 5. Tools 6. Process 6.1 Spinning forms 6.2. Techniques: 7. Product Range 8. Changes
More informationUNIT 4: Textiles and Fabric # Assignment
UNIT 4: Textiles and Fabric # Assignment Pts. Possible 1 Natural Fibers 20 2 Synthetic Fibers 30 3 Fabric Construction and Weaves 15 4 Knits, Non-Wovens and Fabric Finishes 15 5 Textile Experiments 20
More informationModel Curriculum. Ikkat Artisan
Model Curriculum Ikkat Artisan SECTOR : TEXTILE SUB-SECTOR: HANDLOOM OCCUPATION: DESIGNING, DYEING AND WEAVING REF ID : TSC/Q7404 Version 1.0 NSQF LEVEL : 4 Ikkat Artisan Certificate CURRICULUM COMPLIANCE
More informationThe effect of short fibre and neps on Murata vortex spinning
Vol 23, No 1, page 28 January-February, 2002 The Australian Cottongrower The effect of short fibre and neps on Murata vortex spinning By Stuart Gordon, CSIRO Textile and Fibre Technology Murata vortex
More informationUNIT 1: Fashion Basics and Textiles
UNIT 1: Fashion Basics and Textiles # Assignment Pts. possible 1 Logo Creation 10 2 Fashion Basics 10 3 Yin vs. Yang 10 4 Fashion Terms 10 5 Design Details 10 6 Natural Fibers 20 7 Synthetic Fibers 30
More informationINTRODUCTION. Q. What are the properties of cotton frbre considered by cotton spinners?* [Here, * = Reference of Moshiour Rahman]
INTRODUCTION [Here, * = Reference of Moshiour Rahman] Q. Write down the process sequence of carded yarn production.* Dhaka Textile `04; Noakhali Textile - `09 Input Process/machine Output Bale Blow room
More informationTextiles and Design. Total marks 50. Section I Pages marks Attempt Questions 1 10 Allow about 15 minutes for this section
2015 HIGHER SCHOOL CERTIFICATE EXAMINATION Textiles and Design Total marks 50 Section I Pages 2 4 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write using black pen Write your Centre
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe roof shingle preparation and installation procedures
Page 1 of 5 Title Describe roof shingle preparation and installation procedures Level 3 Credits 12 Purpose People credited with this unit standard are able to: describe the planning and checks required
More information2012 HSC Textiles and Design Marking Guidelines
01 HSC Textiles and Design Marking Guidelines Section I Multiple-choice Answer Key Question Answer 1 B D 3 A 4 C 5 B 6 A 7 C 8 B 9 D 10 C 1 01 HSC Textiles and Design Marking Guidelines Section II Question
More information2. Overview of Wool Yarn Manufacture
2. Overview of Wool Yarn Manufacture Errol Wood Learning objectives On completion of this topic you should be able to: Describe the essential features of the worsted, woollen and semiworsted processing
More informationModel Curriculum. Hand Crochet Lace Maker HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3
Model Curriculum Hand Crochet Lace Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3 Hand Crochet Lace Maker
More informationTEXTILE ENGINEERING & FIBRE SCIENCE
TEXTILE ENGINEERING & FIBRE SCIENCE Subject Code: TF Course Structure Sections/Units Section A Unit 1 Unit 2 Unit 3 Unit 4 Unit 5 Unit 6 Section B Section C Section D Section E Section F Topics Engineering
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Higher Certificate in Engineering: NQF Level 5
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Higher Certificate in Engineering: NQF Level 5 Status: Approved by Council Document: E-07-PN Rev 3 26 November
More informationYarn Processing 2/26/2008. Smooth filament yarns: Regular or conventional filament yarns.
Yarn Processing A continuous strand of textile fibers, filaments, or material in a form suitable for knitting, weaving, or otherwise intertwining to form a textile material. Smooth filament yarns: Regular
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919) SEWING COTTON AND NATURAL BLEND KNIT FABRICS
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 2005 SEWING COTTON AND NATURAL BLEND KNIT FABRICS 1992 Cotton Incorporated. All rights reserved; America
More informationLevel 1 Award, Certificate and Diploma in Creative Techniques [7111] Level 1 Sugar Decoration units
Level 1 Award, Certificate and Diploma in Creative Techniques [7111] Level 1 Sugar Decoration units www.cityandguilds.com October 2009 Version 1.3 About City & Guilds City & Guilds is the UK s leading
More informationT^ÏSS^SM INFORMATION RECEIVED BY THE TECHNICAL SUB-GROUP IN RESPONSE TO GATT/AIR/UNNUMBERED A AND B. Addendum KOREA
GENERAL AGREEMENT ON RESTRICTED T^ÏSS^SM TARIFFS AND TRADE Special Distribution Texti Les Committee Original: English Sub-Committee on Adjustment INFORMATION RECEIVED BY THE TECHNICAL SUB-GROUP IN RESPONSE
More informationCHARACTERISTICS OF COTTON FABRICS PRODUCED FROM SIROSPUN AND PLIED YARNS
Egypt. J. Agric. Res., 89 (2), 2011 579 CHARACTERISTICS OF COTTON FABRICS PRODUCED FROM SIROSPUN AND PLIED YARNS Cotton Research Institute, ARC, Giza EL-SAYED, M. A. M. AND SUZAN H. SANAD (Manuscript received
More informationweaving technology Mechanisms of flat Valeriy V. Choogin, The Textile Institute Palitha Bandara and Elena V. Chepelyuk PUBLISHING
Woodhead Publishing Series in Textiles: Number 144 Mechanisms of flat weaving technology Valeriy V. Choogin, and Elena V. Chepelyuk Palitha Bandara The Textile Institute WP WOODHEAD PUBLISHING Oxford Cambridge
More informationSYNTHETIC WEBBING FOR SLINGS
RECOMMENDED STANDARD SPECIFICATION FOR SYNTHETIC WEBBING FOR SLINGS WSTDA-WB-1 2015 WEB SLING & TIE DOWN ASSOCIATION, INC. $25.00 Web Sling & Tie Down Association. All rights reserved. No part of this
More informationLevel 1 Certificate in Design and Craft
Level 1 Certificate in Design and Craft 7716-18 Machine embroidery Qualification handbook www.cityandguilds.com June 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre
More informationRegistration for exhibitor space and product entries
1 Registration for exhibitor space and product entries Planning start: 9th May 2016 Organizer: Please return to saltex@messedornbirn.at or via fax +43 5572 305-9414 Messe Dornbirn GmbH Messeplatz 1, A-6854
More information