Index. 1 Cleaners Quick Clean...page 4 Wax Wash...page 4 Crystal and Glass Cleaner...page 5

Transcription

1

2 Index Cleaners Quick Clean...page 4 Wax Wash...page 4 Crystal and Glass Cleaner...page 5 Fillers Fil-Stik Putty Stick...page 7 Sand Thru Stick...page 9 Quick Fill Burn-In Stick...page 10 Hard Fill...page 11 Hard Fill Kit...page 13 Hard Fill Plus...page 15 E-Z Flow Burn-In Stick...page 17 Epoxy Putty Stick...page 19 Patchal Putty...page 20 Fil-O-Wood Wood Putty Tube...page 21 Fil-O-Wood Wood Putty Can...page 22 Fil-Stik Putty Stick & Ultra Mark Marker Blister Pack...page 100 Burn-in Tools & Accessories Burn-in Balm...page 24 Burn-in Knife...page 24 E-Z Seal Pen...page 24 Micro Therm Flameless Heat Gun...page 24 Burn-In Knife, Battery Operated...page 25 Hard Fill Levelling Tool...page 25 Hard Fill Scraper...page 25 Finish & Filler Scraper...page 25 Colour Replacement & Adjustment Pro-Mark Marker...page 27 Ultra Mark Marker...page 29 Background Marker...page 31 Background Marker Glaze Hang-Up...page 32 Quik-Tip Marker...page 32 Accent Pencils...page 33 Blendal Sticks...page 34 Blendal Powders...page 36 Ultra Classic Toner...page 37 Tone Finish Toner...page 38 Block-It Toner...page 39 Shadow Toner...page 40 Graining Brush Tip Graining Marker...page 42 Graining Pencils...page 44 Ultra Fine Grainer...page 44 Sanding Sealers E-Z Vinyl Sealer Aerosol...page 46 Pre-Catalysed Sanding Sealer...page 47 Tone Finish Flat Easy Sanding Sealer...page 48 Clears Ultra Bond Waterborne Clear Finish Marker...page 50 Blend-Its...page 51 Finish-Up Polyurethane...page 52 Tone Finish Clears...page 53 Ultra-Flo Ultra Bond Clear...page 54 Pre-Catalysed Clears...page 55 Perfect Blend...page 56 Perfect Blend Waterborne...page 57 Clear Spray Shellac...page 58 Wil Pro Padding Finish...page 59 Waterborne Pre-Catalysed Lacquer...page 60 Finisher s Choice Clear Lacquer...page 61 Waterborne Brushing Urethane...page 62 Classic Instrument Lacquer...page 62 Retarders & Reducers No Blush Plus Retarder...page 64 No Blush Blender Flat...page 65 Super Blush Retarder...page 66 Blender Flow-Out...page 67 Lacquer Reducer page 68 Rubbing Compounds Wool-Lube Rubbing Lubricant...page 70 Liquid Rubbing Compound...page 71 Poly-Buf Rubbing Compound...page 72 Pumice Stone...page 73 Polishes Oz Polish...page 75 Scratch Off...page 75 Furniture Cleaner & Restorer...page 76 Scratch & Mar Resister Polish...page 76 Continued over page

3 index cont. Adhesives Instant Adhesive Cyanoacrylate Glue...page 78 Aerosol Adhesive...page 79 Loctite Vinyl, Fabric & Plastic Adhesive...page 79 Lubricants E-Z Slip Lubricant...page 81 Hydro Care Wood Floor System Hydro Cleaner Wood Floor Cleaner...page 83 Hydro Cleaner Wood Floor Protector...page 83 Natural Wax Care for Natural Oiled and Prefinished Floors...page 83 Colour Systems Wiping Wood Stain Aerosol...page 85 Coloured Lacquer Enamel...page 86 Primer Sealer...page 87 Metallic Aerosol...page 87 Break-A-Way Glaze...page 88 Finisher s Glaze Glazing Stain...page 89 Bronzing Powder...page 90 Miscellaneous Danish Oil Aerosol...page 92 Lacquer for Brass Aerosol...page 92 Crackle Lacquer...page 93 Tools & Hardware Mohawk Leveller Card...page 94 Finisher's Colourwheel...page 94 Clear Bumper Disc...page 94 Pressure Unit Spray Tool...page 95 Power Pack (Preval)...page 95 Replacement Nibs...page 96 Spray Heads...page 96 Match All Graining Brush...page 96 Red Sable Art Brush #3...page 96 Mohawk Craftsman Apron...page 97 Pro-Mark Marker Pouch (Empty)...page 97 Training & Literature Understanding Wood Finishing by Bob Flexner...page 97 Wood Touch-Up And Repair DVD...page 97 Professional Finishing Systems DVD...page 97 Repair Kits...page 98 Recommended Consumer Products Fil-Stik Putty Stick & Ultra Mark Marker Blister Pack...page 100 Fil-Stik Putty Stick...page 101 Pro-Mark Marker...page 102 Ultra Mark Marker...page 103 Ultra Bond Waterborne Clear Finish Marker...page 104 Blend-Its...page 105 Hydro Cleaner Wood Floor Cleaner...page 106 Hydro Cleaner Wood Floor Protector...page 106 Natural Wax Care for Natural Oiled and Prefinished Floors...page 106 Mohawk Aerosol Collection Aerosol Adhesive...page 79 Blender Flow-Out...page 67 Block-It Toner...page 39 Break-A-Way Glaze...page 88 Clear Spray Shellac...page 58 Coloured Lacquer Enamel...page 86 Crystal and Glass Cleaner...page 3 Danish Oil Aerosol...page 92 E-Z Slip Lubricant...page 81 E-Z Vinyl Sealer Aerosol...page 46 Finisher's Glaze Glazing Stain...page 89 Furniture Cleaner & Restorer...page 76 Lacquer for Brass Aerosol...page 92 Metallic Aerosol...page 87 No Blush Blender Flat...page 65 No Blush Plus Retarder...page 64 Oz Polish...page 75 Perfect Blend...page 56 Perfect Blend Waterborne...page 57 Pre-Catalysed Clears...page 55 Pre-Catalysed Sanding Sealer...page 47 Primer Sealer...page 86 Quick Clean...page 4 Scratch & Mar Resister Polish...page 76 Scratch Off...page 75 Super Blush Retarder...page 66 Tone Finish Flat Easy Sanding Sealer...page 48 Tone Finish Clears...page 53 Tone Finish Toner...page 38 Shadow Toner...page 40 Ultra Classic Toner...page 37 Ultra-Flo Ultra Bond Clear...page 53 Wax Wash...page 4 Wiping Wood Stain Aerosol...page

4 Cleaners Quick Clean...page 4 Wax Wash...page 4 Crystal and Glass Cleaner...page 5 3

5 Quick Clean Quick Clean contains a combination of solvents that remove unwanted foreign materials from surfaces prior to repair work or applying new finishes. Quick Clean is ideal for cabinets, furniture, appliances, woodwork, and other finished surfaces. Product number: M Application method: Aerosol spray Net contents: 13oz/365gm 1. Clean and prepare surfaces for repair work or new finishes. 1. Dries quickly, low odour, non-greasy formula. 2. Removes labels and glue from most surfaces. 3. Removes unwanted glaze during the glazing process. 4. Cleans and prepares finished surfaces prior to applying an additional finish coat. Wax Wash Remover Removes wax, oil and foreign materials from most surfaces in one application. The presence of wax, oil or foreign materials can retard drying or cause defects in finishing top-coats. Prior to applying a new finish or repair, surfaces with Wax Wash Remover. Ideal for furniture, appliances, woodwork and other surfaces. Product number: M Application method: Aerosol spray Net contents: 13oz/365gm 1. Clean and prepare surfaces for repair work or new finishes. 1. Removes wax, oil and foreign materials from most surfaces. 2. Cleans and prepares finished surfaces prior to applying an additional finish coat. 4

6 Crystal and Glass Cleaner Windows, mirrors, and crystal remain clean longer when cleaned with Crystal and Glass Cleaner. This cleaner dries crystal clear in seconds without leaving a dirt catching film. Also used for cleaning refrigerators, stoves, chrome and other appliances. Product number: M Application method: Aerosol spray Net contents: 13oz/365gm 1. Clean glass and crystal. 2. Clean refrigerators, stoves and other appliances. 3. Clean chrome. 1. Easy to use. 2. Dries in seconds. 3. Non-dirt catching. 5

7 Fillers Fil-Stik Putty Stick...page 7 Sand Thru Stick...page 9 Quick Fill Burn-In Stick...page 10 Hard Fill...page 11 Hard Fill Kit...page 13 Hard Fill Plus...page 15 E-Z Flow Burn-In Stick...page 17 Epoxy Putty Stick...page 19 Patchal Putty...page 20 Fil-O-Wood Wood Putty Tube...page 21 Fil-O-Wood Wood Putty Can...page 22 Filler Selection Guide Filler Ease of use Surface Position Application Time Durability Adhesion Sheen Page Fil-Stik 1 V&H Any 7 Sand Thru Stick 1 V&H Any 9 Quick Fill 2 V&H Any 10 Hard Fill 2 H Any 11 Hard Fill + 2 H Any 15 EZ Flow 5 H High 17 Epoxy Stick 5 V&H Any 19 Patchal Putty 1 V&H Any 20 Fil-O-Wood Wood Putty 4 V&H Any 21 &

8 Fil-Stik Putty Stick Mohawk s Fil-Stik Putty Stick are the ultimate quick, convenient, mess free solution to nicks, nail holes, cracks, open corner joints, etc. Fil-Stiks are made from semi-hard putty, no heat or special tools are required, simply rub in and wipe off. Type: Semi-hard putty Durability: Low Adhesion: Low Dry time: Handle or top-coat immediately after application Ease of use: No experience or special tools required Suitable for: Vertical and horizontal surfaces 1. To refill small areas of damage, such as nicks, nail holes, cracks, open corner joints, etc. 1. No heat or special tools required. 2. Simply rub in and wipe off. 3. Fade resistant, non-bleeding permanent colours. 4. May be top-coated immediately with Ultra Bond Waterborne Clear Finish Marker or other coatings. 5. A wide range of stock colours are available. Use with: Mohawk Leveller Card Ultra Bond Waterborne Clear Finish Marker (or top-coat of your choice) Available as: Individual Colours M White Fil-Stik 12 Pack M Pack Assortment M Pack Maple/Walnut Assortment M Pack Light Assortment M Pack Standard Assortment M Pack Furniture Store Assortment M Pack Assortment (indent) Fil-Stik Putty Stick/Ultra Mark Marker Combo Kit See over for available colours Note: we recommend sealing the repair with Tone Finish Flat Easy Sanding Sealer before using Ultra Bond Waterborne Clear Finish Marker to reduce colour transferring onto the marker sponge. 7

9 Individual Colours Available in Blister Packs: M B Pine M B Old World Mahogany M B Rustic Cherry M B Medium Oak M B Cherry M B Heritage Oak M B Extra Dark Walnut M B Medium Brown Walnut M B White M B Light Walnut Individual Colours Available Loose: M Natural Amber M Natural Tone M White M Medium Brown Walnut M Maple Rock M Brown Mahogany/Toffee M Fontana-New M Heartwood Cherry M Pine/Butterscotch M Statesman Oak M Medium Oak/Toffee M Candlelight Cherry M Light Fruitwood #2 M Light Brown Mahogany 12 Pack Assortment: M Natural Tone M White M Black M Brown Mahogany M Heartwood Cherry M Dark Walnut M Cherry M Pine M Statesman Oak M Medium Oak M Red Brown Mahogany M Dark Cherry 12 Pack Maple/Walnut Assortment: M Light Walnut M Med. Brown Walnut M Extra Dark Walnut M Rock Maple M Med. Dark Walnut M Brown Maple M Med. Rock Maple M Colonial Maple M Dark Walnut M Honey Maple M Salem Maple M Van Dyke Brown 12 Pack Light Assortment: M Natural Amber M Natural Tone M White M Blonde M Wheat M Beige Tone M Pickle Frost M Light Nordic Oak M Off White M Almond M Champagne M Antique White 12 Pack Standard Assortment: M Natural M Natural Tone M Deep Mahogany M White M Light Walnut M Med. Brown Walnut M Extra Dark Walnut M L t. Red Mahogany M Black M Med. Rock Maple M Heritage Oak M Nutmeg 24 Pack Furniture Store Assortment: M Natural M Natural Tone M Deep Mahogany M White M Light Walnut M Med. Brown Walnut M Extra Dark Walnut M L t. Red Mahogany M Black M Med. Rock M Fontana - New M Pickle Frost M Heritage Oak M Dark Walnut M Almond M Cherry M Nutmeg M Winter Pine M Provincial White M Pine M Medium Oak M Old World Mahogany M Rustic Cherry M230-L404 Light Fruitwood 72 Pack Assortment: M Toasted Cinnamon TCM M Pepper PP M Maize Oak MEO M Paprika PKM M Butternut BNM M Ginger GM M Bronze/Oak M Chestnut M Nutmeg/Cherry M Natural Hickory M Natural Oak/Oak M Paprika M Fawn Glaze FZM M Mocha Glaze MMZ M Nutmeg M Natural Cherry M Honey Spice HS M Cider M Chilli Pepper M Harvest M Parchment A23 M Caramel CRM M Chicory CG M Cinnamon CNAC M Amber M Slate SLT M Fawn FN M BCJC-1/Cinnamon Sugar M Cognac Hickory 72 Pack Assortment cont COH M Slate Grey M Gardenia M Ebony Mist / M Cordovan M English Saddle / M Cafe M Praline M Natural Maple M Cherry Cider / M Oak/Hickory Lt. Natural / M Artisan Bronze / M Oasis O.A. M Burgundy M Sunset SU M Hickory Nat. Dark / M Cabernet CBN M Royal M Natural NA M Ginger Glaze GM M Sunrise M Toffee TF M Maple Paprika / M Chocolate Cherry/Cognac Maple CZC M Mirage M Oak Medium / M Oak/Hickory Cider / M Saddle M Maple Natural M Light Fawn M Eventide M Chestnut CNM M Amaretto M Dawn M Mocha M Autumn Blush AB M Praline PRL M Black Glaze/Kaffe EG M Cherry Paprika / M Sedona Maple / M Sable Maple / M Maple Caramel/Toffee M Peppercorn PPC M Kona /

10 Sand Thru Stick Sand Thru Sticks are used to add color edges where colour is missing due to sanding through a finish during the finishing process. This stick will not only add color but it can also fill in small imperfection on the edge. The Sand Thru Stick is very easy to use, simply rub the stick along the light edge to add color, blend the edge with your finger or a rag and then finish with your normal process. Type: Hard Wax Durability: Must be topcoated Dry time: Handle or top-coat immediately after application Ease of use: No experience or special tools required Suitable for: Vertical and horizontal surfaces 1. To color to edges that have been sanded through the color and finish 2. To fill small defects in the edge 1. Quick and easy to use 2. Can be used during your finishing process 3. Can be used after your finishing process 4. Can be used to fill in small imperfections on the edge Stock colours Use with: Must be top coated: use Ultra Bond Waterborne Clear Finish Marker or topcoat of your choice Available as: M Pack Assortment (contains all twelve individual colours) Individual colours Individual Colours: M Umber M Flagstone M Saddle M White M Sasparilla M Conrad Pine M Black M Gray M Antique White M Salvage Oak M Coach Cherry M Coconut/Cotton/Brie/Heavy Cream 9

11 Quick Fill Burn-In Stick Quick Fill is an innovative Burn-In Stick that makes filling defects quick and easy. Designed to fill nicks, dents, and scratches, it s the perfect filler for cabinetry, vinyl wrapped products and photo processed laminates. Quick Fill is applied using a simple heat source and levelled without the use of burn-in knives or sandpaper. Type: Hard Wax Durability: Average Adhesion: Good Melting Point: 79.4 ºC (approx.) Dry time: Top-coat immediately after application Ease of use: Some skill required/ heat source required Suitable for: Vertical and horizontal surfaces 1. To fill nicks, dents, and scratches. 1. Low sheen. 2. Quick and simple application. 3. Perfect for production workers, field techs and cabinet installers stock colours. 5. Well balanced assortments available. Use with: Micro Therm Flameless Heat Gun Mohawk Leveller Card Ultra Bond Waterborne Clear Finish Marker (or topcoat of your choice) Available as: Individual Colours M Pack Assortment #1 M Pack Assortment #2 M Pack Assortment #3 Individual Colours: M True Brown M Statesman Oak M Transparent Red Brown M Transparent Orange Brown M Transparent Yellow Brown M Transparent Green Brown M Transparent Deep Red Brown M Natural Walnut M Transparent True Brown M Mplin/Maple Linen Micro Therm Flameless Heat Gun The Micro Therm Flameless Heat Gun is a hand held, self-igniting, flameless heat gun, powered by a refillable fuel cell. The Micro Therm is the perfect heat source for Quick Fill Burn-In Sticks. Product number: M Assortment #1: M Light Red Mahogany M Deep Mahogany M True Brown M Extra Dark Walnut M Cherry M Red Brown Mahogany M Light Golden Oak M Nutmeg M Heartwood Cherry M Cinnamon Sugar M Black M White 12 Assortment #2 M Deep Brown Cherry M Dark Red Mahogany M Perfect Brown M Light Brown Mahogany M Interior Maple Laminate M Autumn Blush M Honey Spice M Statesman Oak M Rock Maple M Van Dyke Brown M Antique White M Driftwood 12 Assortment #3 M Clear M Natural Oak M Natural Maple M Natural Cherry M Transparent Red Brown M Transparent Orange Brown M Transparent Yellow Brown M Transparent Green Brown M Transparent Deep Red Brown M Natural Walnut M Natural Mahogany M Transparent True Brown 10

12 Hard Fill Hard Fill is made from a blend of hard waxes and is used to repair minor and medium defects in wood and rigid plastic. Recommended for repairs on floors, tops, fronts, sides, doors, drawers, any wood surface. Type: Hard Wax Durability: High Adhesion: Very Good Melting Point: 79.5ºC (approx.) Dry time: Handle or topcoat once cooled Ease of use: Some skill required / specialty tools required Suitable for: Horizontal surfaces 1. To fill nicks, dents, and scratches. 1. Easy to learn and use. 2. Works for any sheen. 3. Excellent for dents. 4. Builds finish quickly. 5. Little to no sanding. 6. Safe for any finish. 7. Good for all sheens. Recommended for: Flooring, retail furniture, cabinets & millwork. Perfect for all wood industries. Use with: Burn-In Knife, Battery Operated Hard Fill Levelling Tool Finish & Filler Scraper Ultra Bond Waterborne Clear Finish Marker (or sealer and topcoat of your choice) Available as: M Pack Assortment #1 M Pack Assortment #2 M Hard Fill Kit See over for assortment colours Burn-In Knife, Battery Operated The Battery Operated Burn-In Knife is a convenient, portable and safe alternative to other hot knife tools available. This tool will melt the Hard Fill and Hard Fill Plus without a cord or a flame. Each unit will be packed with a pointed and a flat tip, batteries included. This portable soldering iron requires 3 x 1.5V AA batteries. Product number: M Hard Fill Levelling Tool The Grater comes complete with the Hard Fill Scraper and is designed with two different grating surfaces and edges. Product number: M Finish & Filler Scraper Scraper The Scraper has four edges designed for scraping a finish or a filler. Product number: M

13 Assortment #1: M American Walnut M White M Black M Honey Maple M Clear M Van Dyke Brown M Fawn Glaze M Oak Hickory Light Natural M Mocha M Kona Assortment #2 M Dark Umber M Cream M Trans Green Brown M Brown Mahogany M Snow White M Champagne M Natural Tone M Pine M Antique Oak M Light Fawn 12

14 Hard Fill Kit Mohawk's Hard Fill kit contains all the products and tools needed to repair and recolour minor and medium defects in wood and rigid plastic. This versatile kit, which comes in a handy carrying case, is recommended for repairs on floors, tops, fronts, sides, doors, drawers and wood surfaces. Product Code: M To fill nicks, dents, and scratches. 1. Easy to learn and use. 2. Works for any sheen. 3. Excellent for dents. 4. Builds finish quickly. 5. Little to no sanding. 6. Safe for any finish. 7. Good for all sheens. Recommended for: Flooring, retail furniture, cabinets & millwork. Perfect for all wood industries. Contents: M314-Colour 40 Hard Fill Assortment 1.5 inch sticks (see over for colours) M Finish & Filler Scraper M Hard Fill Levelling Tool M BURN-IN KNIFE, Battery Operated M Brush Tip Graining Marker Black M Brush Tip Graining Marker Light Oak M Brush Tip Graining Marker Perfect Brown M S Silicon Carbide Waterproof Sandpaper P800A Grit M Grey rubbing pad M S 4 Each Cloth, lint free 12 x 13" 50/pack M M Hard Fill Instruction Sheet 13

15 Hard Fill Kit colours: M Hard Fill Natural inch stick M Hard Fill Deep Red Mahogany inch stick M Hard Fill Light Grey inch stick M Hard Fill New Fontana inch stick M Hard Fill Trans Green Brown inch stick M Hard Fill Medium Tan inch stick M Hard Fill White inch stick M Hard Fill Light Red Mahogany inch stick M Hard Fill Black inch stick M Hard Fill Colonial Maple inch stick M Hard Fill Sand Stone inch stick M Hard Fill Off White /2" M Hard Fill Off White Seafoam inch stick M Hard Fill Snow White inch stick M Hard Fill Honey Maple inch stick M Hard Fill American Brown Walnut inch stick M Hard Fill Almond /2 M Hard Fill Champagne inch stick M Hard Fill Cherry inch stick M Hard Fill Light Golden Oak inch stick M Hard Fill Clear inch stick M Hard Fill Natural Tone inch stick M Hard Fill Transparent Yellow inch stick M Hard Fill Red inch stick M Hard Fill Provincial White inch stick M Hard Fill Silk inch stick M Hard Fill Salem Maple inch stick M Hard Fill Fawn Glaze inch stick M Hard Fill Praline inch stick M Hard Fill Oak Hickory Light Natural inch stick M Hard Fill Light Fawn inch stick M Hard Fill Mocha inch stick M Hard Fill Peppercorn inch stick M Hard Fill Kona inch stick M Hard Fill Natural IV inch stick M Hard Fill Mist inch stick M Hard Fill Arctic White inch stick M Hard Fill Gardenia inch stick M Hard Fill Heritage Cherry inch stick M Hard Fill Amber White inch stick 14

16 Hard Fill Plus Hard Fill Plus is made from a blend of hard waxes and is used to repair minor and medium defects in wood and rigid plastic. Recommended for repairs on floors, tops, fronts, sides, doors, drawers, any wood surface. Hard Fill Plus is harder and has a higher melting point than Hard Fill. Use Hard Fill Plus when additional durability is needed. Type: Hard Wax Durability: Very High Adhesion: Very Good Melting Point: 112.8ºC Dry time: Handle or top-coat once cooled Ease of use: Some skill required / specialty tools required Suitable for: Horizontal surfaces 1. To fill nicks, dents, and scratches. 1. Easy to learn and use. 2. Works for any sheen. 3. Excellent for dents. 4. Builds finish quickly. 5. Little to no sanding. 6. Safe for any finish. 7. Good for all sheens. Recommended for: Flooring, retail furniture, cabinets & millwork. Perfect for all wood industries. Use with: Burn-In Knife, Battery Operated Hard Fill Levelling Tool Finish & Filler Scraper Ultra Bond Waterborne Clear Finish Marker (or sealer and top-coat of your choice) Available as: M Pack Assortment #1 M Pack Assortment #2 M Pack Assortment (all colours) See over for assortment contents Burn-In Knife, Battery Operated The Battery Operated Burn-In Knife is a convenient, portable and safe alternative to other hot knife tools available. This tool will melt the Hard Fill and Hard Fill Plus without a cord or a flame. Each unit will be packed with a pointed and a flat tip, batteries included. This portable soldering iron requires 3 x 1.5V AA batteries. Product number: M Hard Fill Levelling Tool The Grater comes complete with the Hard Fill Scraper and is designed with two different grating surfaces and edges. Product number: M Finish & Filler Scraper Scraper The Scraper has four edges designed for scraping a finish or a filler. Product number: M

17 Assortment #1: M Natural M White M Extra Dark Wanlut M Black M Pickle Frost M Almond M Clear M Salem Maple M Oak Hickory Cider M Arctic White Assortment #2 M Interior Maple Laminate M Honey Spice M Beige Tone M Off White Seafoam M Caramel Umber M Natural Tone M Praline M Kona M Mist M Heritage Cherry 16

18 E-Z Flow Burn-In Stick Mohawk s E-Z Flow Burn-In Sticks make it easy to produce professional burn-in repairs. With a large range of clean, consistent colours, and a special formula that ensures excellent flow and levelling properties, Mohawk E-Z Flow Burn-In Sticks set the benchmark for burn-in repairs. Type: Epoxy resin Durability: High Adhesion: Excellent Melting Point: 135 ºC (approx.) Dry time: Handle or top-coat once cooled Ease of use: Experience recommended / specialty tools required Suitable for: Horizontal surfaces 1. To fill and recolour damaged areas of timber surfaces. 1. Excellent melt and flow characteristics. 2. Excellent adhesion to the substrate. 3. Levels easily with no cup-out. 4. Resists swelling and shrinkage from top-coats. 5. Transparent colours have exceptional clarity. 6. Clean, consistent colours. 7. Large colour range (sixty colours available). Use with: Burn-In Balm Burn-In Knife E-Z Seal Pen Available as: Individual 7 Sticks M Pack Standard Assort. 7 Sticks M Pack Maple/Walnut Assort. 7 Sticks M Pack Assortment 2 sticks See over for assortment contents. Individual Colours Available: M Almond M Walnut M Pickle Frost M Black M Light Walnut M White M Natural Transparent M Light Transparent Amber M Medium Transparent Amber M Water Clear Transparent M Nutmeg Tan M Biscayne Red M Red Mahogany M Light Salem Maple M Dark Oak Burn-in Balm Burn-in Balm prevents excess E-Z Flow Burn-in Sticks from adhering to surrounding area of the timber as they are removed with the Burn-in Knife. Product number: M Size: 113g Burn-in Knife A quality burn-in knife is essential for burn-in repairs. This sleek, cordless butane burn-in knife is small, light and easy to control, making professional quality burn-in repairs a breeze. Product number: M

19 12 Pack Standard Assortment: M Water Clear Transparent M Red Mahogany M Transparent Honey M White M Black M Golden Oak M Off White / Seafoam M Carmel Umber M Cherry M Van Dyke Brown M Medium Oak M Dark Oak 12 Pack Maple/Walnut Assortment: M Red Mahogany M Medium Walnut M Light Walnut M Extra Dark Walnut M Colonial Maple M Walnut M Dark Transparent Walnut M Dark Salem Maple M Radio Walnut M Light Salem Maple M Salem Maple M Medium Brown Maple 30 Assortment Pack: M Water Clear Transparent M Medium Transparent Amber M Dark Transparent Amber M Light Transparent Amber M Medium Tan M Natural Transparent M Red Mahogany M Deep Mahogany M Transparent Honey M White M Light Walnut M Extra Dark Walnut M Black M Sheraton Mahogany M Dark Red Mahogany M Red/Orange Mahogany M Biscayne Red M American Green M Pickle Frost M Golden Oak M Nutmeg Tan M Walnut M Dark Cherry M Almond M Light Golden Oak M Van Dyke Brown M Pine M Dark Oak M Brown Cherry M315-L404 Light Fruitwood 18

20 Epoxy Putty Stick With Mohawk s Wood Epoxy Putty Sticks you can restore, rebuild and repair just about any surface. Epoxy Putty Sticks make permanent, durable repairs that can be sanded, drilled, stained and finished just like timber, enabling you to make repairs that are virtually undetectable and that will last the life of the furniture. Type: Two-part epoxy putty Durability: Excellent Adhesion: Excellent Working time: 3-6 minutes (depending on colour) Cure time: minutes Ease of use: Experience recommended Suitable for: Vertical and horizontal surfaces 1. To fill damage to timber surfaces. 2. To replace, rebuild, or reshape wooden parts. 3. To repair damage to other surfaces, including metals and ceramics. 1. Makes durable, permanent repairs. 2. Easy to use. 3. Fast curing, hardens in minutes. 4. No shrinkage. 5. Moulds to any shape. 6. Excellent adhesion to wood, metal, glass and ceramics. 7. Can be sanded, drilled, stained and painted. 8. Available in a range of colours that can be easily mixed to create custom colours (colour mixing guide available). Available as: Individual sticks (57 g tube pack) M Pack Assortment Individual Colours Available: M Beige M White M Pine M Oak/Light Walnut M Mahogany M Cherry M Walnut M Black M Natural Oak M Natural Maple M Natural Cherry M Raw Umber The 12 Pack Assortment contains one of each colour 19

21 Patchal Putty Patchal Putty is simply the best finish putty that you will ever use. It is an easy to use filler designed for use on small cosmetic repairs. Patchal Putty is designed to be used on finished wood to fill nail holes, mitre joints and cabinet seams. Patchal Putty may be top-coated with lacquer for increased durability. Type: Soft wax putty Dry time: Can be top-coated within minutes Ease of use: No experience or special tools required Suitable for: Vertical and horizontal surfaces Size: 4.4oz/125g 1. For small cosmetic repairs (not recommended for tabletops or other surfaces subjected to wear). 1. Fast easy application and simple clean up. 2. Superior colour selection matched to current industry trends. 3. Fade resistant, non-bleeding permanent colours. 4. May be top-coated within minutes. 5. Easy open packaging keeps putty fresh. Use with: Mohawk Leveller Card, or cloth Topcoat of your choice Available as: M Black M White M Extra Dark Walnut M Van Dyke Brown M Assortment (24 x 4.4 oz ) 24 Assortment: M Black M White M Beige Tone M Light Red Mahogany M Wine M Cherry M Warm Cherry M Rock Maple M Cinnamon M Natural Cherry M Burnt Sienna M Hickory M Mocha M Extra Dark Walnut M Van Dyke Brown M Natural Oak M Natural Maple M Ginger M Raw Sienna M Nutmeg M Honey Spice M Natural Maple Laminate M Fawn 20

22 Fil-O-Wood Wood Putty Tube Mohawk Fil-O-Wood Wood Putty is an extra fine textured, water-based putty, which can be easily applied to fill corner chips, holes, cracks, screw holes and other defects. Recommended for both finishing and touch-up repair jobs where time is not of the essence, or where the hole is too large to fill with a Mohawk Burn-In Stick. This product is applied in the same manner as most other wood fillers. Slightly overfill, let dry, sand and top-coat. Type: Water-based putty Dry time: Depends on the depth of the defect Ease of use: Some skill required Suitable for: Vertical and horizontal surfaces Size: 3oz/85g 1. To refill corner chips, holes, cracks, screw holes and other defects. 1. Mild solvent system will not harm the surrounding finish. 2. Dries with minimum shrinkage and sands quickly. 3. Easy water clean-up. 4. Non-toxic, non flammable. 5. Mohawk Blendal Powders can be mixed into Fil-O-Wood to create custom colours. 6. Can be moulded, chiselled, sawed, stained and top-coated. 7. Great for production work and all wood repairs. 8. Mar resistant. Use with: Mohawk Leveller Card, or putty knife Ultra Bond Waterborne Clear Finish Marker (or sealer and top-coat of your choice) Available as: Individual colours M Pack Assortment Individual Colours Available: M Natural* M Natural Oak M Dark Walnut* M Colonial Maple M Dark Maple M Red Mahogany M Amber Natural M Cherry* M Golden Oak M Fruitwood* * Assortment contents 21

23 Fil-O-Wood Wood Putty Mohawk Fil-O-Wood Wood Putty is an extra fine textured, water-based putty, which can be easily applied to fill corner chips, holes, cracks, screw holes and other defects. Fil-O-Wood Wood Putty dries fast, is easy to use, and accepts stains, finish or paint. Recommended for both finishing and touch-up repair jobs where time is not of the essence, or where the hole is too large to fill with a Mohawk Burn-In Stick. Can be sawed, drilled or carved. Fil-O-Wood wood putty hardens when exposed to air. Type: Water-based putty Dry time: Depends on by the depth of the defect Ease of use: Some skill required Suitable for: Vertical and horizontal surfaces Size: 1 Gallon/3.78 litres 1. To refill corner chips, holes, cracks, screw holes and other defects. 1. Mild solvent system will not harm the surrounding finish. 2. Dries with minimum shrinkage and sands quickly. 3. Easy water clean-up. 4. Non-toxic, non flammable. 5. Mohawk Blendal Powders can be mixed into Fil-O-Wood to create custom colours. 6. Can be moulded, chiselled, sawed, stained and top-coated. 7. Great for production work and all wood repairs. 8. Mar resistant. Use with: Mohawk Leveller Card, or putty knife Ultra Bond Waterborne Clear Finish Marker (or sealer and top-coat of your choice) Available as: M Natural Oak 22

24 Burn-In Tools & Accessories Burn-in Balm...page 24 Burn-in Knife...page 24 E-Z Seal Pen...page 24 Micro Therm Flameless Heat Gun...page 24 Burn-In Knife, Battery Operated...page 25 Hard Fill Levelling Tool...page 25 Hard Fill Scraper...page 25 Finish & Filler Scraper...page

25 Burn-In Tools & Accessories Burn-in Balm Burn-in Balm prevents excess E-Z Flow Burn-in Sticks from adhering to surrounding area of the timber as they are removed with the Burn-in Knife. Product number: M Size: 4oz/113g 1. Easy to use. 2. Makes for a quicker repair. 3. Minimises sanding.. Use with: E-Z Flow Burn-In Stick Burn-in Knife E-Z Seal Pen A quality burn-in knife is essential for burn-in repairs. This sleek, cordless butane burn-in knife is small, light and easy to control, making professional quality burnin repairs a breeze. Product number: M Features: 1. Cordless. 2. Butane powered. 3. Made of durable plastic, ultra-light weight. 4. Compact and economical to use. 5. Good balance helps make burn-ins easier. 6. Built in stand. 7. Dependable self-ignition system. 8. Durable with no moving parts. 9. Easy to fill. 10. Fill once with butane fuel for an hour of use. 11. Comes with a flat burn-in blade. 12. Adjustable temperature control. Use with: E-Z Flow Burn-In Stick Burn-in Balm Hard Fill Hard Fill Plus Use this product over a E-Z Flow Burn-in Sticks to prevent the higher gloss that shows through in matt or low sheen top-coats. Product number: M To reduce the sheen of burn-in repairs. 1. Good lacquer holdout. 2. Dries quickly. 3. Easy to use. Use with: E-Z Flow Burn-In Stick Replacement Nibs: M Acrylic Chisel Tip (24 pack) Micro Therm Flameless Heat Gun The Micro Therm Flameless Heat Gun is a hand held, self-igniting, flameless heat gun, powered by a refillable fuel cell. The Micro Therm is the perfect heat source for Quick Fill Burn-In Sticks. Product number: M Hand held, automatic electronic ignition 2. Patented safety lock 3. Produces 700ºC flameless heat 4. Refillable fuel cell-disposable butane lighter 5. Compact ergonomic design Use with: Quick Fill Burn-In Sticks 24

26 Hard Fill Tools Burn-In Knife, Battery Operated The Battery Operated Burn-In Knife is a convenient, portable and safe alternative to other hot knife tools available. This tool will melt the Hard Fill and Hard Fill Plus without a cord or a flame. Each unit will be packed with a pointed and a flat tip, batteries included. This portable soldering iron requires 3 x 1.5V AA batteries. Use with: Hard Fill Hard Fill Plus Product number: M Hard Fill Levelling Tool The Grater comes complete with the Hard Fill Scraper and is designed with two different grating surfaces and edges. Straight Grater Surface: these teeth are positioned to have a grating action to level the Hard Fill. Angled Grater Surface: these teeth are positioned to have a shearing action to level the Hard Fill. Rounded Grater Edge: these teeth are designed to level a rounded recessed area along a profile. Straight Grater Edge: these teeth are designed to level a 90 recessed area along a profile. Use with: Hard Fill Hard Fill Plus Product number: M Hard Fill Scraper (replacement) Replacement scraper for the Hard Fill Levelling Tool. The Scraper has one edge designed for scraping and one edge designed to clean the teeth of the Grater. Use with: Hard Fill Levelling Tool. Product number: M Finish & Filler Scraper Scraper The Scraper has four edges designed for scraping a finish or a filler. Use with: Hard Fill Hard Fill Plus Product number: M

27 Colour Replacement & Adjustment Pro-Mark Marker...page 27 Ultra Mark Marker...page 29 Background Marker...page 31 Background Marker Glaze Hang-Up...page 32 Quik-Tip Marker...page 32 Accent Pencils...page 33 Blendal Sticks...page 34 Blendal Powders...page 36 Ultra Classic Toner...page 37 Tone Finish Toner...page 38 Block-It Toner...page 39 Shadow Toner...page

28 Pro-Mark Marker Whether you need to touch-up 1 inch or 20 feet, the dye-based Pro-Mark II marker does it the first time and every time. Pro-Mark Marker colours have excellent resistance to fading, colour shift from top-coats, and will not bleed. The nib offers superior flow along with the durability needed to do all normal repair work. The nib remains usable for the life of the marker. Pro-Mark Markers have good adhesion and mark equally well with the edge, the bottom or the tip. Colorant: Dye Application method: Marker Opacity: Transparent 1. Re-colouring edges and scratches. 1. Fast and easy to use. 2. Excellent flow. Will not skip even when used on porous materials. 3. Good adhesion to most surfaces and resistance to polishes. 4. Uniform colour strength. 5. Bleed resistant. 6. Nib remains usable for the life of the marker for normal applications. 7. Can be used at any angle, including upside down. 8. Highest rated lightfast dyes for complete clarity and colour retention. 9. Transparent colour allows the characteristics of the wood to show through. Use With: Pro-Mark Markers can be used as a standalone product, but we recommend that you apply a top-coat, to obtain maximum durability. Alternative Products: Ultra Mark Marker Brush Tip Graining Markers Blendal Stick Blendal Powder Available as: Individual colours M Pack Assortment #1 M Pack Assortment #4 Individual Colours Available: M Light Oak M Marker Natural Light Oak M Natural Amber M Nutmeg M Maple Glaze Individual Colours Available in Blister Packs: M B Pine M B Brown Paprika M B Cherry M B Cherry/Fruitwood M B Deep Cordovan M B Heartwood Walnut M B Dark Red Walnut M B Perfect Brown M B Red Brown Mahogany M B Medium Walnut/Brown Pecan M B Honey Maple M B Mocha Brown M B Warm Oak See over for assortment contents. 27

29 12 Assortment #1 M Honey Maple M Natural Amber M Warm Brown Walnut M Antique Maple M Old World Walnut M Golden Oak M Cherry/Walnut M Mocha Brown M Warm Oak M Natural Maple M Maple Glaze M Brown Paprika 12 Assortment #4 M Warm Brown Walnut M Medium Walnut/Brown Pecan M Plum Black M Dark Red Mahogany M Newport-Ebonized Cherry M Golden Oak M Medium Oak M Warm Walnut M Mahogany M Salem Maple M Natural Maple M Pine 28

30 Ultra Mark Marker Mohawk s Ultra Mark Markers contain light-fast pigments which seal, stain and finish in one easy operation. They are compatible with all types of finishes, making them ideal for edge and scratch re-colouring. For further protection, markers may be finished with Tone Finish Clears, or other top-coats, including lacquers, acrylics, varnishes and urethanes. Colorant: Pigment Application method: Marker Opacity: Medium 1. Re-colouring edges and scratches. 2. Colouring repairs made with Mohawk fillers, particularly Fil-Sticks. 1. Fast and easy to use. 2. Valve type tip provides fluid control. 3. High opacity 4. Excellent light fastness (contains UV inhibitors). 5. Even when the cap is left off, the tip can be re-primed, so you can use all the liquid inside the marker. 6. Replaceable nibs available in four different styles. 7. Compatible with all types of finishes. 8. Seal, stain and finish in one application. Use With: Ultra Mark Markers can be used as a standalone product, but we recommend that you apply a top-coat, to obtain maximum durability Alternative Products: Pro-Mark Marker Background Marker Blendal Stick Blendal Powder Available as: Individual colours (blister pack) M Pack Assortment M Pack Assortment Fil-Stik Putty Stick/Ultra Mark Marker Combo Kit Individual Colours Available: M Extra Dark Walnut/Sm Hazelnut M Mark Frost Individual Colours Available in Blister Packs: M B Statesman Oak #2 M B Light Golden Oak M B Cherry BG M B Dark Red Mahogany #2 M B Honey/Caramel M B Light Red Mahogany M B Extra Dark Walnut #2 M B White M B Raw Umber M B Brown Maple See over for assortment contents. Replacement Nibs: M Chisel Point (24 per pack) M Bullet Point (24 per pack) 29

31 12 Pack Assortment Contents: M Raw Umber M White M Extra Dark Walnut #2 M L t. Red Mahogany M Honey/Carmel M Black #2 M Dk. Rd. Mahogany #2 M Brown Maple M Cherry BG M Nutmeg M Lt. Golden Oak M Statesman Oak #2 24 Pack Assortment Contents: M Extra Dark Walnut M Black M Cherry M Traditional Cherry M Dark Red Mahogany M Rich Cherry M Pine M Antique White M Natural Lt. Oak M White M Medium Walnut M Extra Dark Walnut #2 M Black #2 M Dk. Rd. Mahogany #2 M Brown Mahogany M Medium Dark Walnut M Brown Maple M Perfect Brown M Universal Cherry M Cherry BG M Nutmeg M Van Dyke Brown M Bay M Cognac 30

32 Background Marker Mohawk's Background Markers dispense a thin, fast drying, low sheen film, which can be used to replace background colour over repairs, such as fills or glue lines, or to mask areas of discolouration, such as stains or dark areas in raw wood. Background Markers are indispensible for touchups on MDF, particleboard, and other very absorbent substrates that tend darken when other types of markers are applied. Colorant: Pigment Application method: Marker Opacity: Very high 1. Colour over repairs e.g. glue lines, fillers, putties and burn-ins. 2. Re-colour edges, scratches and sand throughs on highly absorbent materials, such as MDF or particleboard, which tend to darken with other types of markers. 3. Mask areas of discolouration, such as stains or dark areas in raw wood. 1. Easy to use. 2. Very high opacity. 3. Pigment-based colour with excellent light fastness. 4. Compliments many stain colours. 5. Good adhesion to repairs. 6. Valve activated nib: even when the cap is left off, the tip can be re-primed, so you can use all the liquid inside the marker. 7. Replaceable nib. 8. Colour band on markers to aid in indentifying correct colours. Use With: Background Markers can be used as a standalone product, but we recommend that you apply a top-coat, to obtain maximum durability Alternative Products: Ultra Mark Marker Blendal Stick Blendal Powder Available as: M Assortment Assortment Contents: M Natural M Champagne M Dark Walnut/Dark Glaze M Medium Oak M Light Walnut M Mahogany M Cherry M Georgian Leather M Sweet Maple M Oatmeal Maple M Light Golden Oak M Black Replacement Nibs: M Acrylic Chisel Point (12 per pack) M Acrylic Bullet Point (12 per pack) M Polyester Bullet/Chisel Point Dual End, High Flow (12 per pack) M Acrylic Brush/Chisel Point (12 per pack) 31

33 Background Marker Glaze Hang-Up Dispenses a thin, highly opaque, fast drying glaze. Colorant: Pigment Application method: Marker Opacity: Very high 1. Touching up hang-up areas of repairs. 1. Easy to use. 2. Very high opacity. 3. Fast drying Use With: We recommend that you apply a top-coat, to obtain maximum durability. Available as: M B Ebony/Black M B Deep Brown M B Sable/Ginger M B Brown Glaze Quik-Tip Marker Mohawk s Quik-Tip Marker applies a durable finish, solid color touch-up and repair in one easy operations. This product provides excellent adhesion and wear. Colorant: Pigment Application method: Marker Opacity: High 1. Recolor worn edges, minor surface and edge marks 1. Solid color touch-up 2. High solids 3. Quick drying 4. Excellent adhesion 5. Durable finish no top coat needed Use With: Can be used as a stand alone product Available as individual colours: M Transparent Water Clear M Silverado M High Gloss White M Flat White M High Gloss Black M Satin White Uc M Matte White Uc M Matte Cream Uc M Gloss White Uc Replacement Nibs (suitable for M290, M293 and M294 markers): M Acrylic Chisel Point (12 per pack) M Acrylic Bullet Point (12 per pack) M Polyester Bullet/Chisel Point Dual End, High Flow (12 per pack) M Acrylic Brush/Chisel Point (12 per pack) 32

34 Accent Pencils Accent Pencils are an easy to use tool for applying colour or grain lines to a filler or a sand through area. They can also be used to apply colour to light cut through edges. Colorant: Pigment Application method: Pencil Opacity: Medium i. Accent Pencils can be used on small spot repairs to: ii. iii. Create foreground colour. Add grain lines, distressing, mineral streaks, cow tailing. 1. Fast and easy to use. 2. Superior blending and shading. 3. Smooth colour lay down. 4. Will not bleed when top-coated. Use with: A protective coating must be sprayed over the area after applying. We recommend using the Mohawk top-coat of your choice Alternative Products: Brush Tip Graining Markers Graining Pencils Blendal Sticks Blendal Powder Available as: M : 7 Pack Assortment 7 Pack Contents: M Black M Brown M Red Brown M True Brown M Fruitwood M Cherry M Dark Umber 33

35 Blendal Sticks Blendal Sticks, created using the same extra fine ground pigments in Mohawks popular Blendal Powder Stains, are a convenient way to add or alter colour when repairing wood. Blendal Sticks allow you to quickly and accurately replace colour on raw or finished edges and flat surfaces. You can easily blend the colours to accomplish a perfect match. Colorant: Pigment Application method: Stick Opacity: High 1. To add or alter colour when repairing or touching up wood. 2. To add grain lines. 1. Fade resistant, non-bleeding permanent colours. 2. Ultra fine ground pigments for maximum colour yield. 3. Colours transfer and blend easily on the surface without attacking the finish. 4. The stick can be sharpened for fine detail or graining (a sharpener is included in each assortment). 5. Can be top-coated immediately. 6. Multiple colours can be blended to obtain a perfect colour match. Use With: Tone Finish Flat Easy Sanding Sealer. A protective coating must be applied. We recommend using the Mohawk top-coat of your choice Available as: Individual colours M Pack Assortment #1 M Pack Assortment #3 M Pack Assortment Individual Colours Available: M Autumn Cherry M Dark Walnut M Toffee M Cayenne M White M Black M Burnt Umber M True Brown M Burnt Sienna M Rock Maple M Natural Maple M Cherry Glaze See over for assortment contents. Alternative Products: Ultra Mark Marker Accent Pencil Blendal Powder 34

36 12 Pack Assortment #1: M Raw Sienna M Ginger Brown M Harvest Brown M Burnt Umber M Heritage Cherry M Raw Umber M True Brown M Burnt Sienna M Mahogany M Cordovan M Black M White 12 Pack Assortment #3: M Moss Glaze M Honey Spice M Toffee M Irish Crème Glaze M Antique White M Red Brown Mahogany M Dark Walnut M Perfect Brown M Caramel M Autumn Cherry M Cherry Glaze M Mocha 36 Pack Assortment: M Raw Sienna M Ginger Brown M Harvest Brown M Burnt Umber M Heritage Cherry M Raw Umber M True Brown M Burnt Sienna M Mahogany M Cordovan M Black M White M Beige Tone M Rock Maple M Wheat M Cinnamon M Cayenne M Natural Oak M Van Dyke Brown M Honey Maple M Natural Maple M Pale Gold M Silver M Rust M Moss Glaze M Honey Spice M Toffee M Irish Crème Glaze M Antique White M Red Brown Mahogany M Dark Walnut M Perfect Brown M Caramel M Autumn Cherry M Cherry Glaze M Mocha 35

37 Blendal Powder Stain Blendal Powder Stains are ultra fine ground pigments that can be blended to accurately replace colour on all types of furniture. Blendal Powder Stains can be combined with Wil Pro Padding Finish, Finish-Up Polyurethane or clear aerosol finishes to repair colour defects without removing the original finish. Colorant: Pigment Application method: Brush application or padding Opacity: Depends the ratio of powder to medium used 1. Spot colour replacement on all types of furniture, including: timber furniture, cabinets, plastics, leather, and vinyl. 2. Tinting clear coatings. 1. Compatible with many finishes. 2. Easy to use. 3. Pre colour matched. 4. Very lightfast. 5. Can be blended to accurately match any surface colour. 6. Can be applied with a brush or padding pad. Use With: Fil-O-Wood Wood Putty Wil Pro Padding Finish Finish-Up Polyurethane Tone Finish Flat Easy Sanding Sealer. Tone Finish Clears Blendal Powder Stains are compatible with various other mediums, including: padding agents, "French Polish", lacquer, shellac, varnish, synthetic finishes and graining liquids. Alternative Products: Ultra Mark Marker Blendal Stick Accent Pencil Available as: M Pack Assortment (1oz/29 gm pots) 12 Pack Assortment Contents: M White M Canary Yellow M Black M Red M Ochre Yellow M Dark Burnt Umber M Blue M Burnt Sienna M Raw Sienna M Raw Umber M Burnt Umber M Van Dyke Brown 36

38 Ultra Classic Toner Mohawk Ultra Classic Toners have proven themselves very successful throughout the Touch-up industry where extreme transparency and clarity is required. Fade resistant and non-bleeding dyes are used for the entire colour line. These toners can be used to make small touch-up repairs or to shade and tone an entire article, without imparting the muddy effect sometimes associated with pigment type toners. Use the appropriate clear lacquer aerosol if the sheen level needs adjustment. Colorant: Dye Application method: Aerosol spray Opacity: Transparent Net contents: 13oz/365gm 1. To correct colour irregularities in timber finishes. 2. To correct colour irregularities in colour touch-ups. 1. Hap s compliant. 2. Aerosol form, no extra equipment needed. 3. Feathers in invisibly to provide seamless touch-up repairs. 4. Available in a wide variety of wood finishing shades. 5. Excellent transparency. 6. Excellent flow out. 7. No overspray. 8. Mar and alcohol resistant. Use With: For best results seal and top-coat with an appropriate Mohawk product Available as: Individual colours M Pack Assortment Individual colours: M Medium Brown Walnut Assortment Contents: M Natural Pine M Medium Brown Walnut M Extra Dark Walnut M Dark Red Mahogany M Brown Mahogany M Light Oak/Natural M Dark Walnut/Oak M Light Walnut/Colonial Maple M Medium Oak/Tavern Pine M Deep Red Mahogany M Cherry M Dark Walnut 37

39 Tone Finish Toner Finely ground, non-fading pigments for colour repairs that last. Available in a wide variety of wood finishing shades. Used throughout the industry for quick efficient professional touch-up. Adapts to various methods so as to blend in spot repairs. Adjustment of sheen is achieved with a top-coat of clear lacquers available in gloss, satin, flat and dead flat. Colorant: Pigment Application method: Aerosol spray Opacity: Low opacity Net contents: 13oz/365gm 1. To recolour spot repairs. 1. Hap s compliant. 2. Aerosol form, no extra equipment needed. 3. Feathers in invisibly to provide seamless touch-up repairs. 4. Available in a wide variety of wood finishing shades. Use With: For best results seal and top-coat with an appropriate Mohawk product. Assortment Contents: M Brown Mahogany M Raw Umber M Medium Walnut M Light Walnut M Extra Dark Walnut M Light Red Mahogany M Blonde M Dark Red Mahogany M Medium Dark Walnut M Perfect Brown M Amber M Dark Van Dyke Brown 38

40 Block-It Toner Mohawk s Block-It Toner harnesses advanced colour technology to allow you to adjust colour irregularities in timber. Block-It Toners can be applied directly over the existing finish, allowing you to correct irregularities without stripping or refinishing the piece. Colorant: Ultra fine pigment Application method: Aerosol spray Opacity: Transparent Net contents: 13oz/365gm 1. To correct colour irregularities in timber finishes, such as: a) problems of redness, darkness or shading; or b) to warm up, cool down or neutralise the colour of a finish. 1. Permanent transparent coloured lacquer coatings. 2. Colour harmony and enhanced colour tone can be achieved by using Block-It Toners. Orange will warm up cold colours, green and blue will neutralize red to produce brown shades. 3. Use of the basic principle of complimentary or supplementary colours and the interaction of light produces the desired effect. Use With: Can be used as a stand alone product. Available Colours: M Blue M Green M Orange M Transparent Orange 39

41 Shadow Toner Easily add colour to a repair or a finishing project by using Mohawk's new Shadow Toner. The Shadow Toner is made with micro fine, non fading pigments and high quality lacquer. This aerosol will add colour to your project without a muddy appearance. Apply Shadow Toner to your project to correct the colour or add colour to help hide a repair. Adjustment of sheen is achieved with a clear top-coat lacquer. Colorant: Micro fine pigment Application method: Aerosol spray Opacity: Semi-transparent Net contents: 13oz/365gm 1. To correct colour irregularities in timber finishes. 2. To add colour to touch-ups. 1. Superior flow-out 2. Subtle blending 3. Good clarity 4. No overlap marks Use With: Can be used as a stand alone product. Available Colours: M Black M Blue M Green M Orange M Transparent Orange 5. Fine atomisation of colour. 40

42 Graining Brush Tip Graining Marker...page 42 Graining Pencils...page 44 Ultra Fine Grainer...page

43 Brush Tip Graining Markers The Brush Tip Graining Marker is the perfect colour tool for service technicians. This revolutionary marker features a micro brush tip that allows you to apply colour exactly where it is needed without any messy powders, fluids or odours. Brush Tip Graining Markers come ready to use. Simply stroke or dot on colour where it's needed. To soften or blend the colour, tap the colour while it is wet with a clean cloth. This is simply the easiest marker that you will ever use! Colorant: Dye Application method: Brush tip marker Opacity: Semi-transparent 1. Add grain lines to repairs. 2. Add colour to small sand throughs, defects or repairs. 3. To alter the colour of a Fil-Stik Putty Stick, Quick Fill Burn-In Stick, or E-Z Flow Burn-In Stick. 1. Micro brush tip applicator. 2. Complete 24 colour palette. 3. Clear crisp colours that hold a thin line. 4. Low to no odour. 5. Easy to use, teach and learn. 6. Quick and easy application, no messy powders, extra brushes or liquids. Use With: Brush Tip Graining Markers can be used as a stand-alone product, but we recommend that you apply a top-coat, to obtain maximum durability Alternative Products: Graining Pencils Accent Pencils Blendal Sticks Blendal Powder Stain Available as: Individual Colours M Pack Assortment #1 M Pack Assortment #2 M Pack Assortment #3 M Pack Assortment #4 Individual Colours Available: M Raw Umber See over for assortment contents. 42

44 6 Pack Assortment #1: M Raw Umber M Dark Cherry M Perfect Brown M Dark Perfect Brown M Honey Spice M Black 6 Pack Assortment #2: M Light Oak M Van Dyke Brown M Dark Brown Mahogany M Burnt Umber M Burnt Sienna M Deep Brown Mahogany 6 Pack Assortment #3: M Ash Tone M Honey Maple Tone M Warm Brown Walnut Tone M Golden Oak Tone M Deep Cordovan M Natural Light Oak Tone 6 Pack Assortment #4: M Warm Oak Tone M Maple Glaze Tone M Medium Dark Oak Tone M Light Golden Oak Tone M Nutmeg Tone M Antique Maple Tone 43

45 Graining Pencils The graining pencil is an artist pencil with soft, thick cores to create a smooth colour lay down for superior blending and shading. The pencils can be used to add colour or grain lines over raw wood, finished wood, and Mohawk Epoxy Sticks. The colour of the pencils will not bleed or change when top-coated. Recommended on production line touch-up stations since colour can be replaced along moving line. Colorant: Pigment Application method: Pencil Opacity: Medium 1. Add colour 2. Add grain lines 1. Fast and easy to use. The absence of liquid eliminates drying time. 2. Superior blending and shading. 3. Smooth colour lay down. 4. Will not bleed when top-coated. Use with: We recommend that you apply a top-coat, to obtain maximum durability Alternative Products: Brush Tip Graining Markers Accent Pencils Blendal Sticks Blendal Powder Available as: M Pack Assortment 14 Pack Contents: M Graining Pencil Warm Grey M Graining Pencil French Grey 70% M Graining Pencil French Grey 90% M Graining Pencil Sandbar Brown M Graining Pencil Black M Graining Pencil Light Umber M Graining Pencil Burnt Ochre M Graining Pencil Brown Sienna M Graining Pencil Dark Brown M Graining Pencil Dark Umber M Graining Pencil Sepia M Graining Pencil Beige M Graining Pencil Goldenrod (oak) M Graining Pencil Raspberry (mahogany) Ultra Fine Grainer Mohawk Ultra Fine Grainer. The best choice for replacing grain and distressing marks over spot repairs on all types of furniture and cabinets. Colorant: Pigment Application method: Pen Opacity: High 1. Add fine grain lines 1. New nib design with continuous flow 2. Produces extra fine grain lines 3. Quick drying permanent inks 4. Easier than brush application 5. Top coat with any Mohawk finish Use with: We recommend that you apply a topcoat, to obtain maximum durability Alternative Products: Brush Tip Graining Markers Graining Pencils Accent Pencils Blendal Sticks Blendal Powder Available as individual colours: M Light Oak Gp9 M Medium Brown Gp8 M Dark Brown Gp7 M Black Gp6 44

46 Sanding Sealers E-Z Vinyl Sealer Aerosol...page 46 Pre-Catalysed Sanding Sealer...page 47 Tone Finish Flat Easy Sanding Sealer...page

47 E-Z Vinyl Sealer Aerosol E-Z Vinyl Sealer aerosol is the perfect choice for spot repairs on kitchen cabinetry, furniture or millwork where improved durability, moisture resistance and adhesion are critical. E-Z Vinyl Sealer aerosol is a water clear, quick build sealer that s specifically designed for surface preparation under mid to high sheen finishes. E-Z Vinyl Sealer aerosol sprays with good atomization and flow, and provides a flexible, moisture resistant surface when applied under all Mohawk aerosol clear top-coats, especially the pre-catalysed aerosol lacquers. Characteristics: Stearate free Sheen range: Resin System: Nitro / Alkyd / Vinyl Application method: Aerosol Spray Solid WT% (w/o gas): 11.4 Product number: M Net contents: 13oz/365gm 1. Surface preparation for spot repairs on kitchen cabinetry, furniture or millwork where improved durability, moisture resistance, and adhesion are critical. 2. Surface preparation under mid to higher sheen finishes. 1. Suitable for use under any Mohawk Aerosol top-coat. 2. Flexible. 3. Moisture resistant. 4. Non-stearated formula (provides better adhesion and reduces the risk of the finish peeling). 5. Water clear. 6. Quick build degree sheen. Use with: Ultra-Flo Ultra Bond Clear Pre-Catalysed Clears 46

48 Pre-Catalysed Sanding Sealer Mohawk Pre-Catalysed Sanding Sealer excels in flow out, adhesion and hold out. Fast drying, resistant to yellowing and leaves no halo on spot repairs. Recommended for use under Pre-Catalysed Clears, and C.A.B. Topcoats. Characteristics: Stearate free Sheen range: 0-15 Resin System: Nitro / Alkyd / Urea Application method: Aerosol Spray Solid WT% (w/o gas): 13.3 Product number: M Net contents: 13oz/365gm 1. To seal spot repairs in preparation for top-coating. 2. For use under Pre-Catalysed Clears, and C.A.B. Topcoats 1. Excellent atomization and flow out. 2. Excellent adhesion and hold out. 3. Fast dry, leaves no halo on spot repairs. 4. Resistant to yellowing. Use with: Pre-Catalysed Clears Alternative products: E-Z Vinyl Sealer Aerosol 47

49 Tone Finish Flat Easy Sanding Sealer Mohawk Flat Easy Sanding Sealer helps to fill the timber grain in preparation for the final finish, producing a smooth, even finish. It was designed for use in conjunction with flat and dead flat final finishes, but it is also suitable for use under gloss finishes. Characteristics: Stearated Sheen range: Resin System: Nitro / Ester Gum Application method: Aerosol Spray Solid WT% (w/o gas): 10.7 Product number: M Net contents: 13oz/365gm 1. To seal spot repairs in preparation for top-coating. 2. To seal Blendal Powders. 1. HAP s compliant. 2. Aerosol form no extra equipment needed. 3. Does not exceed 95% VOC 4. Gives very good clarity considering its low gloss. 5. Provides for easy sanding. Use with: Tone Finish Clears 48

50 Clears Ultra Bond Waterborne Clear Finish Marker...page 50 Blend-Its...page 51 Finish-Up Polyurethane...page 52 Tone Finish Clears...page 53 Ultra-Flo Ultra Bond Clear...page 54 Pre-Catalysed Clears...page 55 Perfect Blend...page 56 Perfect Blend Waterborne...page 57 Clear Spray Shellac...page 58 Wil Pro Padding Finish...page 59 Waterborne Pre-Catalysed Lacquer...page 60 Finisher s Choice Clear Lacquer...page 61 Waterborne Brushing Urethane...page 62 Classic Instrument Lacquer...page

51 Ultra Bond Waterborne Clear Finish Marker Mohawk Ultra Bond Waterborne Clear Finish Marker produces a durable, chemical resistant, water clear finish for use on flooring, cabinets, furniture and many other surfaces. Has excellent adhesion on most hard to adhere to finishes such as urethane, UV and aluminium oxide. A truly multi-purpose top-coat for those small repairs and finishing needs. Finish Type: Water base Curing type: Coalescing Resin System: acrylic/urethane Application method: Marker 1. Topcoat to protect repairs and touch-ups. 1. Easy to use. 2. Excellent adhesion. 3. Durable, resistant water clear finish. 4. Multi-purpose top-coat for small repairs. 5. Low odour. 6. Fast drying. 7. Blends well into the surrounding area, providing a nearly invisible repair. Can be used with: Fil-Stik Putty Stick Quick Fill Burn-In Stick Pro-Mark Marker Ultra Mark Marker Hard Fill and Hard Fill Plus And many more Mohawk repair products Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) M Matt M Satin M Semi-Gloss M Gloss

52 Blend-Its A clear liquid filler and top-coat used to repair minor surface scratches, replace finish and to lock in other types of repair work. Adheres to most materials or finishes. Fast drying Blend-Its can be used on all finishes without fear of damaging the finish. Each jar comes with a brush attached to the cap for quick and easy application. Finish Type: Liquid filler and top-coat Curing type: Evaporative / Coalescing (waterborne) Resin System: alkyd / acrylic Application method: Brush Solid WT%: Volume: 0.5oz/15ml 1. To repair minor surface scratches. 2. To replace finish. To lock in other types of repair work. 1. Fast drying. 2. Blend-Its can be used on all finishes without fear of damaging the finish. 3. Each jar comes with a brush attached to the cap for quick and easy application. Available sheens: Product Number Sheen Solids (Wt. %) w/o gas M Flat M Satin M Gloss M Blend-IT Water Clear Touch Up

53 Finish-Up Polyurethane A user-friendly wipe on finish, Finish-Up Polyurethane can be applied over repairs such as Burn-Ins, Fil-Stick Putty Stick fills, Blendal Powders and Touch Up Markers to seal the repair, and leave a durable protective finish. Finish- Up can also be applied over old finishes to improve their appearance and durability. Finish-Up adheres well to most types of lacquers, vinyl clads, and high pressure laminates, as well as many other substrates. Best of all, it is water based and has almost no odour, making Finish-Up Polyurethane the product of choice where aerosols and other solvent based touch-up finishes are not appropriate. Finish Type: Water base Curing type: Coalescing Resin System: Acrylic / Polyurethane Application method: Wipe-on Volume: 473ml or 946ml 1. As a top-coat 2. To seal repairs 3. To improve appearance and durability of old finishes 4. As a medium for Blendal Powders. Can be used with: Blendal Powders Touch Up Markers Mohawk fillers Alternative products: Perfect Blend Waterborne Ultra Bond Waterborne Clear Finish Marker 1. Non-flammable. 2. Easy to use. 3. Will not lift other finishes. 4. Easy wipe on application. 5. Good flow characteristics. 6. Moisture & alcohol resistant. 7. Excellent adhesion. 8. Quick drying. 9. Good durability. 10.Water clear. 11.Water based. 12.Low odour. 13.Low VOC. 14.Non-flammable. Available sheens: Product Number Volume Sheen Sheen Range Solids (Wt. %) w/o gas M ml Flat M ml Satin M ml Gloss M ml Flat M ml Satin M ml Gloss

54 Tone Finish Clears Mohawk s best selling aerosol lacquer, these clear, nitrocellulose based lacquers are recommended as top-coats for wood finishes and furniture repairs. The choice of five different sheens, and excellent flow and blend-in properties, make Tone Finish Clears the perfect choice for repairs. Finish Type: Lacquer Curing type: Evaporative Resin System: Nitro / Alkyd Application method: Aerosol spray Net contents: 13oz/365gm 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces. 1. Easy to use. 2. Blush resistant. 3. Excellent blend-in properties. 4. Good cold check resistance. 5. Excellent print and mar resistance. Use with: Tone Finish Flat Easy Sanding Sealer Alternative products: Pre-Catalysed Clears Ultra-Flo Ultra Bond Clear Finish-Up Polyurethane Perfect Blend Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) w/o gas M Dead Flat M Flat M Satin M Semi-Gloss M Gloss

55 Ultra-Flo Ultra Bond Clear Ultra-Flo Ultra Bond Clears are specially formulated to adhere to and flow out over hard to coat surfaces such as UV cure, two-component, polyester and other finishes. Finish Type: Lacquer Curing type: Evaporative Resin System: Nitro / Alkyd / Polyketone Application method: Aerosol spray Net contents: 13oz/365gm 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces. 1. Provides superior adhesion and flow. 2. HAP s compliant. 3. MIR compliant. 4. Excellent blend-in properties. 5. Available in four sheens. Use with: E-Z Vinyl Sealer Aerosol Alternative products: Ultra Bond Waterborne Clear Finish Marker Pre-Catalysed Clears Finish-Up Polyurethane Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) w/o gas M Flat M Satin M Semi-Gloss M Gloss

56 Pre-Catalysed Clears Mohawk Pre-Catalysed Clears offer the durability of a pre-catalysed lacquer with the ease of aerosol application. The dry film is very durable and adheres where other finishes will not. Pre-Catalysed Clears have been tested and approved for in factory as well as onsite touch-up on catalysed finishes. Finish Type: Pre-Catalysed Lacquer Curing type: Reactive Resin System: Nitro / Alkyd / Urea Application method: Aerosol spray Net contents: 13oz/365gm 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces. 1. Excellent atomization. 2. Excellent adhesion. 3. Very good clarity and durability. Use with: Pre-Catalysed Clear Finish Sealer, or E-Z Vinyl Sealer Aerosol Alternative products: Ultra-Flo Ultra Bond Clear. Finish-Up Polyurethane Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) w/o gas M Dead Flat M Flat M Matte M Satin M Semi-Gloss M Gloss

57 Perfect Blend Perfect Blend aerosol is a premium blended nitrocellulose lacquer formulated to produce a soft spray and fine atomisation resulting in virtually no overspray, little bounce and excellent flow. Perfect Blend is perfect for touch-up. The soft spray coupled with low solids gives Perfect Blend superior blending properties, allowing you to perform touch-ups without worrying about creating a halo effect. Perfect Blend also offers excellent adhesion, even over waxed and polished surfaces and areas contaminated with silicone, but does not adhere to most metals and plastics. Finish Type: Lacquer Curing type: Evaporative Resin System: Nitro Application method: Aerosol spray Net contents: 13.5oz/383gm 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces. 1. Easy to use. 2. Soft spray and fine atomization. 3. Excellent blend-in properties. 4. Excellent adhesion. 5. Premium packaging. Use with: Tone Finish Flat Easy Sanding Sealer Alternative products: Tone Finish Clears Perfect Blend Waterborne Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) w/o gas M Dead Flat M Flat M Matte M Satin M Semi-Gloss M Gloss

58 Perfect Blend Waterborne Perfect Blend Waterborne is a premium, fast-drying, very low odour, water-based acrylic lacquer perfect for touch-ups. It displays excellent adhesion over waxed and polished surfaces and areas contaminated with silicone. Water Based Perfect Blend features a soft spray, low film build, and fine atomisation resulting in virtually no overspray, little bounce, good flow, and a strong ability to blend in with the surrounding surface. Ideal for situations where odour may be an issue, such as restaurants, offices, homes and hotels. Finish Type: Lacquer Curing type: Coalescing Resin System: Acrylic Application method: Aerosol spray Net contents: 13.5oz/383gm 1. Topcoat to protect repairs and touch-ups. 2. Topcoat for finishing small pieces. 1. Soft spray and fine atomization. 2. Virtually no overspray, little bounce and excellent flow out. 3. Superior blend with surrounding area, no halo effect touch-up. 4. Excellent adhesion over waxed and polished surfaces. 5. Very low odour. 6. HAP free. Alternative products: Finish-Up Polyurethane Perfect Blend Ultra Bond Waterborne Clear Finish Marker Available sheens: Product Number Sheen Sheen Range Solids (Wt. %) w/o gas M Flat M Matte M Satin M Semi-Gloss M Gloss

59 Clear Spray Shellac Clear Spray Shellac is pure shellac. Shellac has unusually good adhesion to hard-to-grip surfaces and exceptional hold out on wood, plywood, and plaster. This versatile product can be used as a clear coating, sealer, barrier coat or tie coat. It can also be used on copper and aluminium screening, arts and crafts projects, string design, etc. Finish Type: Shellac Curing type: Evaporative Resin System: Shellac Application method: Aerosol spray Product number: M Net contents: 12oz/340gm 1. As a clear coating on furniture, floors, inside drawers and food cabinets 2. As a sealer over porous surfaces, such as worn areas, knots, refill areas etc. 3. As a barrier coat over silicone-contaminated areas. 4. As a tie coat to provide adhesion between hard-to-grip surfaces and the final finish. 1. Easy to use. 2. Clear Gloss finish. 3. Quick drying. 4. Good adhesion to many surfaces. 5. Versatile. 58

60 Wil Pro Padding Finish Wil Pro Padding Finish is formulated especially for the professional touchup artist, making it the first choice of experts. Not only is it one of our Mohawk s most popular French finishes, it also makes the perfect medium for Blendal Powder Stains. Its performance is particularly impressive where clarity and minimum build-up are critical. Finish Type: Shellac Curing type: Evaporative Resin System: Shellac Application method: Padding Solid WT%: 7.46 Product number: M Volume: 946ml 1. French polishing. 2. As a medium for Blendal Powder Stains 3. For removing packing marks and mars on fine furniture. 1. Super fast-dry. 2. Very low build-up. 3. Excellent clarity. 4. No discoloration on light finishes. 5. The best for French polishing. 6. Lowest build-up of any French finish on the market. 7. May be coated with lacquer immediately. 8. Ready to use; no oil or additives are required. 9. Very print resistant. 10. May be used on the very lightest of finishes with no discoloration. 59

61 Waterborne Pre-Catalysed Lacquer Mohawk s Waterborne Pre-Catalysed Lacquer is a water reducible, self cross-linking, low VOC emitting technology that has good colour retention and is suitable for cabinet, millwork, furniture and other high traffic interior wooden surfaces. Waterborne Pre-Catalysed Lacquer passes KCMA tests with as little as two coats and can be used as a self sealing system. Waterborne Pre-Catalysed Lacquer is formulated to meet production shop needs and is an excellent environmentally friendly alternative to comparable solvent based pre-catalysed products. Waterborne Pre-Catalysed Lacquer may be applied over any Mohawk stain. Note: allow oil type stains to dry a minimum of one hour for improved adhesion. Waterborne Pre-Catalysed Lacquer containers resist rusting and improve the product s shelf life. Finish Type: Waterborne Pre-Catalysed Lacquer Curing type: Reactive Application method: Spray application Net volume: 1 gallon/3.78 litre or 5 gallon/11.34 litre 1. Finishing. 1. Certified as a waterborne system (USA GREENGARD ). 2. Contains no formaldehyde, phthalates or lead. 3. Low odour. 4. Water clean up. 5. Low emissions. Available sheens: AVAILABLE ON INDENT ONLY Product Number 1 Gallon Product Number 5 Gallon Sheen Sheen Range Solids (Wt. %) M M Sealer n/a M M Matte M n/a Satin M M Semi-Gloss M M Gloss

62 Finisher's Choice Clear Lacquer Available sheens: Finisher's Choice Clear Lacquers have always been trusted for high quality results. These lacquers are Mohawk s best selling and easiest to use nitrocellulose formulation and perfect for applying to interior wooden surfaces. Mohawk s unique formulas are shipped at spray viscosity to help you save time and money by getting the build you need with less application. Solids: 20%. Finish Type: Nitrocellulose Curing type: Evaporative Application method: Spray application Net volume: 1 gallon/3.78 litre or 5 gallon/11.34 litre 1. Finishing. 1. Quick dry 2. Easy to touch up 3. Excellent flow out 4. Ready to spray viscosity VOC compliant 6. Alcohol resistant 7. Good drying and levelling properties 8. Excellent rubbing and polishing characteristics 9. Good cold check resistance 10.Hard, durable finish that provides years of service under normal conditions of use Product Number 1 Gallon Product Number 5 Gallon Sheen Sheen Range Solids (Wt. %) M * M * Sealer n/a M * M * Flat M * M * Matt M * M * Satin M * M * Semi-Gloss M M * Gloss *AVAILABLE ON INDENT ONLY 61

63 Waterborne Brushing Urethane Waterborne Brushing Urethane is a high quality, non-yellowing acrylic/urethane top coat that provides a beautiful finish that will enhance the beauty of your wood projects. Waterborne Brushing Urethane is low odor, fast drying and low VOC. It is easy to apply and has excellent leveling properties. It is a high solids, self-sealing finish that provides faster build with fewer coats for superior results. Finish Type: Waterborne acrylic/urethane Curing type: Coalescing Application method: Brush or spray application 1. Finishing VOC 2. Meets KCMA requirements 3. Water clean up 4. Low odour 5. Easy to use 6. Dries quickly 7. Excellent leveling properties 8. Perfect for on-site application Net volume: 1 quart/946 ml Available sheens: M Flat M Satin M Semi-Gloss Classic Instrument Lacquer A high quality Nitrocellulose Wood Lacquer for musical instruments providing unique depth of gloss, superior colour and gloss retention, adhesion, and exceptional cold check resistance. Formulated to produce a superior finish on thin, flexible veneers such as those used on stringed musical instruments. Excellent flow, flexibility and durability. Superior rubbing qualities yield a mirror-like reflectance. Supplied ready to spray. Finish Type: Nitrocellulose Curing type: Evaporative Application method: Spray application Solid WT%: Sheen: Gloss 90 Available sizes: 1. M quart/ 946ml 2. M gallon/3.78 litre 1. Finishing musical instruments 1. Easy to use, no reduction necessary 2. Good spray flow levelling properties 3. Alcohol and scuff resistant finish 4. Excellent rubbing and polishing characteristics 5. Minimum shrinkage on aging 6. Superior cold check resistance (cracking) passes 20 cold check cycles on 1/8 plywood, 5 coats 7. Hard, wear resistant finish that will show improved appearance on aging 62

64 Retarders & Reducers No Blush Plus Retarder...page 64 No Blush Blender Flat...page 65 Super Blush Retarder...page 66 Blender Flow-Out...page 67 Lacquer Reducer page

65 No Blush Plus Retarder Humidity or cold weather can cause a finish to turn white (blush). No Blush Plus Retarder re-flows the finish and allows the trapped moisture to escape. Product number: M Recommended for: Most conditions and finishes Suitable for: Suitable for finishes with sheens 40+ Application method: Aerosol spray Net contents: 13oz/365gm 1. To remove blushing. 2. To remove light scratches. 3. To remove "orange peel" 4. To blend over spray. 1. Easy to use. 2. Very effective. 3. Controlled results. 4. Will not raise the sheen of matt finishes. Alternative Products: No Blush Blender Flat Super Blush Retarder Blender Flo-Out 64

66 No Blush Blender Flat Designed specifically for lower sheen finishes, No Blush Blender Flat smooths and levels finishes with orange peel or light scratches. No Blush Blender Flat can also be used to blend over-spray on spot repair work for various non-gloss sheens. It also works as a standard No Blush to remove the trapped moisture that causes problems like blushing. Product number: M Recommended for: Matt finishes Suitable for: Only suitable for matt finishes (sheens 5-40) Application method: Aerosol spray Net contents: 13oz/365gm 1. To remove blushing. 2. To remove light scratches. 3. To remove areas of shine, such as rub marks, on matt finishes. 4. To remove "orange peel. 5. To blend over spray. 1. Easy to use. 2. Very effective. 3. Controlled results. Alternative Products: No Blush Plus Retarder Super Blush Retarder Blender Flo-Out 65

67 Super Blush Retarder Mohawk s Super Blush Retarder is a highly effective blush remover aerosol designed for solving the most severe blushing problems. A couple of light applications are all that is needed to eliminate the white surface blush. Product number: M Recommended for: Sever blushing and high humidity conditions Suitable for: Finishes with sheens 40+ Application method: Aerosol spray Net contents: 13oz/365gm 1. To remove blushing. 2. To remove light scratches. 3. To remove "orange peel" 4. To blend over spray. 1. Easy to use. 2. Very effective. 3. Controlled results. Alternative Products: No Blush Blender Flat No Blush Plus Retarder Blender Flo-Out 66

68 Blender Flow-Out Mohawk Blender Flo-Out is a highly active solvent formula with excellent flow designed to blend in overspray and o range peel. This product is most suited as the final spot repair finish. Application method: Aerosol spray Net contents: 13oz/365gm 1. To blend over spray. 2. To blend in "orange peel. 1. Easy to use. 2. Excellent blush resistance. Alternative Products: No Blush Blender Flat No Blush Plus Retarder Super Blush Retarder Available sheens: Product Number Sheen M Flat (10-15) M Satin (40) M Gloss (>75) 67

69 Lacquer Reducer 2255 Formulated with only the highest quality solvents, Lacquer Reducer 2255 helps prevent orange peel and helps provide good flowout. Recommended for use with all Mohawk nitrocellulose, pre-catalysed and post-catalysed lacquers. Product number: M Suitable for: Use with all Mohawk nitrocellulose, pre-catalysed and postcatalysed lacquers. Net volume: 1 gallon/3.78 litres 1. To prevent orange peel and provide good flow out. 1. Enhance flow and atomization. 2. Reduce solids content to control build. 3. Special blend provides proper evaporation rate. 68

70 Rubbing Compounds Wool-Lube Rubbing Lubricant...page 70 Liquid Rubbing Compound...page 71 Poly-Buf Rubbing Compound...page 72 Pumice Stone...page

71 Wool-Lube Rubbing Lubricant Wool-Lube paste is a highly concentrated, multi-purpose, water reducible, non-abrasive rubbing and sanding lubricant. Wool-Lube can be used in conjunction with steel wool, abrasive pads, or wet-dry sandpaper to create a smooth, clear final appearance on all finishes. Product number: M Sheen produced: Matt to satin Volume: 473ml 1. As a rubbing and sanding lubricant. 2. When reduced with water and used with steel wool or abrasive pads it can be used to remove packing marks and scratches from finished surfaces. 3. As a preparatory step for higher sheen rubbing agents. 1. Easy to use. 2. Will not gum up. 3. Wipes clean: finishes rubbed with Wool-Lube and an abrasive can be recoated immediately after being wiped dry. 4. Can be lacquered over: does not interfere with the adhesion or drying of lacquer. 5. Highly concentrated, water reducible paste. 6. Non-abrasive. 7. The velvet-satin lustre will not haze. 8. Non-toxic. 9. Contains no silicones. 10. Can be used with dry abrasive powders, such as Pumice, and Rotten Stone. 11. Using a sanding lubricant greatly extends the life of waterproof sandpapers. Use with: Steel wood, wet-dry sandpaper, or abrasive pads Liquid Rubbing Compound Poly-Buf Rubbing Compound 70

72 Liquid Rubbing Compound (3-Step) Level II (Medium to High Sheen) Mohawk s Level II Rubbing Compound series will produce a medium to high sheen on coatings such as lacquers, shellac, varnish, etc. STEP 1: Liquid Rubbing Compound Used to remove overspray and wet sanding scratches on conventional and modern high tech finishes. Yields a high satin sheen. STEP 2: Liquid Polishing Compound Cleans and polishes while removing Step 1 Liquid Rubbing Compound scratches and swirl marks. Yields medium gloss sheen. STEP 3: Liquid Finishing Compound Removes swirl marks from Step 2 Liquid Polishing Compound and increases surface gloss. Leaves a polished look. 1. To polish and buff. 2. To remove light scratches from a finish. 3. To remove over spray. 4. To remove wet sanding scratches. 1. Semi paste form. 2. Quick clean up. 3. Creates a polished look. 4. Can be used with hand or machine buffing. Use with: Use as a stand alone product, or After using Wool-lube Rubbing Lubricant, and/or Before using Poly-Buf Rubbing Compound Level III (Super High Sheen) Product Numbers: M Step 1: Liquid Rubbing Compound (946ml) M Step 2: Liquid Polishing Compound (946ml) M Step 3: Liquid Finishing Compound (946ml) Product Limitations: For medium to high sheen gloss. 71

73 Poly-Buf Rubbing Compound Level III (Super High Sheen) This three-step rubbing compound system will produce the highest sheen possible from a clear coating, leaving the finish with a super high sheen wet look. This system should be used after treating the finish with the Liquid Rubbing Compound Level II system. Sheen produced: Super high sheen wet look 1. Polish and buffing. 1. Semi Paste form. 2. Quick clean-up. 3. Best performance with machine buffing. Use with: Liquid Rubbing Compound (3-Step) Level II (Medium to High Sheen) Product Numbers: M Medium (237ml) M Fine (337ml) M Extra Fine (237ml) 72

74 Pumice Stone Pumice Stone, 4F Grit produces a soft lustre. Use to produce a smooth finish after applying the final coat of lacquer or varnish. Product number: M Weight: 5lb/2.3kg 1. To produce a smooth finish after applying the final coat of varnish. Use with: A paraffin based rubbing oil. 73

75 Polishes Oz Polish...page 75 Scratch Off...page 75 Furniture Cleaner & Restorer...page 76 Scratch & Mar Resister Polish...page

76 Oz Polish Mohawk s Oz Polish contains everything you need to clean, polish and protect your furniture. As well as being the ultimate one-step furniture polish, Oz Polish contains an antistatic agent to reduce the need for dusting, an Ultraviolet light absorber to prevent fading, and a lemon scent for a fresh, clean fragrance. It's safe! It's sure. It's the easiest one step operation in the business. Oz Polish is really polishing magic. Application method: Aerosol spray Net contents: 13oz/365gm 1. Cleans, polishes and protects. 2. Contains an antistatic agent. 3. Ultraviolet light absorber helps to protect your furniture from fading. 4. Non-abrasive. 5. Greaseless. 6. Quick drying. 1. Can be used to clean, polish and protect any smooth finished surface, including: timber, tile, marble, chrome etc. Available as: 1. M Aerosol 2. M ml Liquid Alternative products: 1. Scratch & Mar Resister Polish Scratch Off Scratch Off leaves worn timber surfaces looking like new. Its special formula covers scratches and minor imperfections as you polish. Scratch Off can be used on new or used furniture, woodwork, doors and panelling. Application method: Aerosol spray Net volume: 384ml 1. To polish and rejuvenate worn or scratched finishes. 1. Easy to use. 2. Instant results. 3. Only needs to be used sparingly. Alternative products: 1. Furniture Cleaner & Restorer Available in aerosol form: 1. M Mahogany Aerosol 2. M Natural Aerosol 3. M Golden Oak Aerosol Available in liquid form: 1. M Scratch of for Light Finishes (237 ml liquid ) 2. M Scratch of for Dark Finishes (237 ml liquid ) 75

77 Furniture Cleaner & Restorer Furniture Cleaner & Restorer is a furniture polish with just a hint of colour. It was developed specifically to rejuvenate worn or scratched oil finishes on walnut, teak, rosewood and similar timbers. The easy sprayon, wipe-off procedure makes for a quick restoration. Product number: M Application method: Aerosol spray Net contents: 13oz/365gm 1. To polish and rejuvenate worn finishes. 2. To mask light scratches. 1. Restores colour as it cleans. 2. Hides scratches. 1. For dark wood furniture only. Alternative products: 1. Scratch Off Scratch & Mar Resister Polish Mohawk Scratch & Mar Resister Polish is designed to make finished wood surfaces more resistant to scratches and marring than an untreated surface by adding surface lubrication. Mohawk Scratch & Mar Resister Polish reduces printing of the surface, packing marks and will not affect the finish sheen. Application method: Spray or cloth 1. To polish protect finished wood surfaces. 1. Provides scratch resistance to wood. 2. Reduces coefficient of friction by adding surface lubrication. 3. Natural and tinted formulas, for light and dark finishes. 4. Contains an anti-static agent. 5. Scratch & Mar Resister Polish can be recoated. 6. Does not affect the sheen. Available as: 1. M Tinted 473ml 2. M Clear 473ml Alternative products: 1. Oz Polish 76

78 Adhesives Instant Adhesive Cyanoacrylate Glue...page 78 Aerosol Adhesive...page 79 Loctite Vinyl, Fabric & Plastic Adhesive...page

79 Industrial Grade Instant Adhesive Cyanoacrylate Glue Industrial grade for maximum bonding strength. The Thin Adhesive wicks into tight places where flowing into and under is essential. Medium and Heavy Adhesives for semi-smooth surfaces. Gel Adhesive for filling and bonding porous surfaces. The non-whitening activator accelerates curing time. The De-Bonder removes unwanted or excess glue. Pro Tips Extension Applicators: thin, needle-like plastic tube attaches to the tapered tip of the CA glue bottle. Allows dispensing of glue into cracks and joins. This easily replaceable tip helps avoid clogging of the main tip on the bottle. Suitable for use with Thin, Medium and Heavy CA Adhesives. 1. To glue any combination of wood, naugahyde, plastic, veneers, cardboard, rubber, ceramics, leather or vinyl. 1. Easy to use. 2. Industrial grade for maximum bonding strength. 3. Non-yellowing. 4. Quick repair: instant set, no clamping. 5. Comes with a de-bonder for removing unwanted or excess glue. Product Numbers: M ml Thin Adhesive Clear M ml Thin Adhesive Clear M ml Medium Adhesive Clear M ml Medium Thin Black M ml De-Bonder M ml Activator M Pro Tips Extension Applicators (12 pack) M Instant Adhesive Starter Kit Instant Adhesive Starter Kit Contents: 60 ml Thin Adhesive 60 ml Medium Adhesive 20 g Gel Adhesive 60 ml De-Bonder 60 ml Activator Now available in Medium Thin Black Used to effectively fill joints for a seamless appearance. It serves as a quick setting, stabilizing, production joint filler. It is able to fill very narrow joints for a seamless look. When activated, glue sets in seconds. Will not clog your machine sanding belts. Stays in very thin joints because of the adhesive. It will five that final seamless look. Allows you to be assured the joint is filled before finishing. Will not bleed through any solid coloured lacquer, even white. 78

80 Aerosol Adhesive Spray Adhesive offers a fast tack time, which enables general purpose bonding on a wide variety of substrates, high bond strength and may be used to create a temporary or permanent bond. Its unique formula prevents soak in of the adhesive on porous surfaces. Recommended for use on the following substrates: polyurethane foam, wood, paper, and fabric. Product number: M Application method: Aerosol spray Net contents: 10oz/283gm 1. Adhesive for use on wood, polyurethane foam, paper, and fabric. 1. Non-Methylene Chloride. 2. Meets US Federal & State V.O.C. Requirements. 3. All purpose mist spray. 4. Fast tack time enables general purpose bonding on wide variety of substrates. 5. Water white. 6. Unique formula prevents soak in of the adhesive on porous surfaces. 7. High bond strength. 8. Repositionable or permanent depending on application. 9. Bonds polyurethane foam, wood, plastic, leather, paper and fabric. 10. Won't degrade Styrofoam significantly. Loctite Vinyl, Fabric & Plastic Adhesive Loctite Vinyl, Fabric & Plastic Flexible Adhesive is a clear liquid formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear. The adhesive is highly flexible to withstand bending and twisting. It dries to a transparent and waterproof bond. It will not yellow or go brittle with age. Product number: M Net volume: 1 FL OZ/59g 1. Adhesive for use on paper, glass, metal, ceramic, leather, wood, fabric rubber and some plastics. 1. Waterproof so it can be used for interior or exterior applications 2. Dries clear for invisible repairs and eliminates unsightly tape or patches 3. Remains flexible and will not brittle or yellow with age for long lasting repairs 79

81 Lubricants E-Z Slip Lubricant...page

82 E-Z Slip Lubricant Greaseless and silicone free, E-Z Slip Lubricant is the perfect lubricant for wooden drawers, doors, windows and any other wooden fixtures that tend to bind. It reduces friction, prevents wear, and helps to increase ease of moving parts. Product number: M Application method: Aerosol spray Net contents: 13oz/365gm 1. Lubricant. 1. Does not contain silicone. 2. Greaseless. 3. Reduces friction. 4. Prevents wear. 81

83 Hydro Care Wood Floor System Hydro Cleaner Wood Floor Cleaner...page 83 Hydro Cleaner Wood Floor Protector...page 83 Natural Wax Care for Natural Oiled and Prefinished Floors...page

84 Hydro Care Wood Floor System Hydro Cleaner Wood Floor Cleaner Hydro Cleaner Wood Floor Cleaner is a ready-to-use, environmentally friendly cleaner and wax remover for sealed laminate and hardwood floors. Hydro Cleaner should be applied by spraying a light mist of product over a 6 ft. x 6 ft. section (or smaller). After a short time, remove the product by working with a very light abrasive pad or a mop. For best results, rinse with clear water. Heel marks and heavier dirt marks can be removed with a cloth soaked with Hydro Cleaner. Product number: M Volume: 1 quart / 946ml Suitable for: Sealed laminate and hardwood floors Application method: Spray Hydro Cleaner Wood Floor Protector Hydro Care Wood Floor Protector is a water-based, environmentally friendly, wax maintenance product that can be used on all types of wood. Hydro Care should be applied in very thin coats and is intended to even up (refresh) the appearance in the traffic areas of the floor while providing a thin, soil resistant protective coating. Product number: M quart / 946ml M gallon / litres Suitable for: Sealed laminate and hardwood floors Application method: Spray Natural Wax Care for Natural Oiled and Prefinished Floors Natural Wax Care is applied to natural oiled floors to freshen up the surface by providing a new impregnation of oil with a silky sheen finish. Natural Wax Care is used when floors are scratched or worn. Product number: M Volume: 473ml Suitable for: Natural oiled hardwood floors Application method: Cloth 83

85 Colour Systems Wiping Wood Stain Aerosol...page 85 Coloured Lacquer Enamel...page 86 Primer Sealer...page 87 Metallic Aerosol...page 87 Break-A-Way Glaze...page 88 Finisher s Glaze Glazing Stain...page 89 Bronzing Powder...page

86 Wiping Wood Stain Aerosol Pigmented wiping stains that create beautiful, grain-enhancing, faderesistant wood tones. Wiping Wood Stains can be used as stand alone or in conjunction with other Mohawk products to create professional finishes with rich depth of colour. Spills are out of the question with Wiping Wood Stain Aerosols. No stain dribbles down the side of the container while stirring, just shake the can. Apply by spraying the stain to the surface of the wood and using a brush or a cloth to spread the colour. Cleanup is accomplished by inverting the can and depressing the nozzle for about 5 seconds. Colorant: Pigment Application method: Aerosol spray Opacity: Semi-transparent Net contents: 13oz/365gm 1. Staining. 1. Truly professional stain in an aerosol. 2. Contain pigments that resist fading from UV rays. 3. Easy to use, no mess, no spills. 4. Great for easy application on carved surfaces and hard to reach areas popular colours to choose from. 6. Colours are matches for corresponding Mohawk Wiping Wood Stains in bulk. 7. HAPS compliant. Use With: For best results seal and top-coat with an appropriate Mohawk product Available as: Individual Colours M Pack Assortment Assortment Contents: M Van Dyke Brown M Medium Walnut M White M Medium Brown Walnut M Extra Dark Walnut M Black M Dark Red Mahogany M Brown Mahogany M Perfect Brown M Modern Mahogany M Cherry M Light Golden Oak 12 Pack Assortment contains one of each colour 85

87 Coloured Lacquer Enamel Opaque solid for interior use only. Fast drying, lacquer based enamel. Superior hiding power for producing opaque finishes. These products do not need to be top-coated with a clear coat. Colorant: Pigment Application method: Aerosol spray Opacity: Opaque Net contents: 13oz/365gm 1. For colour replacement after touch-ups or repairs. 2. To colour and finish small pieces. 1. Easy to use. 2. Various colours available. 3. Complete coverage with minimal number of coats. Use With: Primer Sealer Available Colours: M Antique White M Medium Reddish Tan M104-G202 White Gloss M104-G224 Black Gloss M104-S224 Black Satin M New Fontana (background) Primer Sealer Primer coat for use under coloured lacquer enamels. Insures good adhesion for the final top-coat. Primer Sealer is fast drying and easy sanding, resulting in a smooth base. Has excellent colour strength. New formula quickly covers in two coats and sands well. Colorant: Pigment Application method: Aerosol spray Opacity: Opaque Net contents: 13oz/365gm 1. Primer coat under coloured lacquer enamels. 1. Easy to use. 2. Good adhesion. 3. Quick drying. Use With: Coloured lacquer enamels Available Colours: M White M Black 86

88 Metallic Aerosol Mohawk s Metallic Aerosol product line contains pure, bright gold powders in a stable, non-yellowing, non-greening, unique formulation for use on metal, wood, picture frames, ceramics, etc. This is a decorative finish that will not tarnish. Colorant: Pigment Application method: Aerosol spray Opacity: Opaque Net contents: 13oz/365gm 1. Decorative finish. 1. Easy to use. 2. Good Adhesion. 3. Bright stable colours. Use With: Can be used as a stand alone product. Available Colours: M Bright Gold M Antique Gold M Rich Pale Gold M Silver B/A 87

89 Break-A-Way Glaze Break-A-Way Glaze will help you create dramatic, clean accent lines on any shaped surface. You may never want to wipe a glaze again after trying Break-A-Way Glaze. Mohawk s Break-A-Way Glaze is the perfect product to easily add heavy hang up and detail accent colour to ornate fine woodworking or cabinetry. Break-A-Way Glaze Aerosol is spray applied over a sanded sealer or finish coat and then allow drying to a chalky, powdered state that is easily removed from unwanted areas using light pressure with a synthetic abrasive pad. Break-A-Way Glaze must be top-coated with a clear finish. Colorant: Pigment Application method: Aerosol spray Net contents: 13oz/365gm 1. To add heavy hang up. 2. To create dramatic, clean accent lines. 1. Convenient aerosol application. 2. May be used under or over waterborne finishes. Note: allow to dry 1 hour after removing excess if top-coating with a water borne finish. 3. Superior hang and build compared to solvent glazes. Use With: Sanding sealer of your choice Topcoat of your choice Available Colours: M White M Burnt Umber M Van Dyke Brown 88

90 Finisher's Glaze Glazing Stain A truly professional glaze in an aerosol. No mess, no fuss. Just shake and spray. No lid to open. No messy stir stick. No spills. No messy applicator. This is a medium viscosity glaze formulated to yield great workability, with a high pigment load that assures the opacity you need for great coverage, and a solvent system that is so coatings compatible that you can top-coat within just minutes. Use this glaze for quick and easy touchups, finishing applications, refinishing, and expedient application on carvings and into corners. In short, use it for anything you can do with a bulk glaze...only faster. Colorant: Pigment Application method: Aerosol spray Net contents: 13oz/365gm 1. Quick and easy touch-ups. 2. Finishing applications. 3. Refinishing. 1. Truly professional glaze in an aerosol. 2. Easy to use, no mess, no spills popular colours to choose from. 4. HAPS compliant. Use With: Sanding sealer of your choice Topcoat of your choice Available as: Individual colours M Pack Assortment Individual Colours Available: M Raw Umber M White M Black M Deep Mahogany M Burnt Umber M Van Dyke Brown The 6 Pack Assortment contains one of each colour 89

91 Bronzing Powder Concentrated lining grade bronzing colours free of fillers and extenders. Used to decorate picture frames, furniture, lamps, antique objects and many other items. For extra bright effects, highlighting is effective. Raised portions of a frame can be burnished to a higher lustre thus creating a contrast with the rest of the work. Colorant: Pigment Form: Powder Net volume: 1oz/29g or 8oz/227g 1. To decorate picture frames, furniture, lamps, antique objects and other items. 1. Fade resistant, non-bleeding permanent colours. 2. Ultra fine ground for maximum colour yield. 3. Colours transfer and blend easily on the surface without attacking the finish. 4. May be top coated immediately. Use With: Topcoat of your choice. Colours Available: M Antique Gold 1oz M Antique Gold 8oz M Silver 1oz M Silver 8oz M Pale Gold 1oz M Pale Gold 8oz M Rich Pale Gold 1oz M Rich Pale Gold 8oz M Rich Gold 1oz M Rich Gold 8oz 90

92 Miscellaneous Danish Oil Aerosol...page 92 Lacquer for Brass Aerosol...page 92 Crackle Lacquer...page 93 Tools & Hardware Mohawk Leveller Card...page 94 Finisher's Colourwheel...page 94 Clear Bumper Disc...page 94 Pressure Unit Spray Tool...page 95 Power Pack (Preval)...page 95 Replacement Nibs...page 96 Spray Heads...page 96 Match All Graining Brush...page 96 Red Sable Art Brush #3...page 96 Mohawk Craftsman Apron...page 96 Pro-Mark Marker Pouch (Empty)...page 96 Training & Literature Understanding Wood Finishing by Bob Flexner...page 97 Wood Touch-Up And Repair DVD...page 97 Professional Finishing Systems DVD...page

93 Danish Oil Aerosol Danish Oil is a polymerized wood finish, which combines penetrating oils with urethane resins to produce a natural oil finish on unfinished wood. Danish Oil produces a natural looking finish that won't chip or peel away as the polymerized finish seals and hardens the wood. Product number: M Suitable for: Unfinished wood (Danish Oil should not be applied over lacquer or other finished surfaces). Application method: Aerosol spray Net contents: 12oz/340gm 1. To create a natural looking oil finish on unfinished wood. 1. One application seals and finishes wood. 2. Never gums up in warm temperatures. 3. Will not print and is non-greasy. 4. Water spots, stains, burns and scratches are easily removed by buffing with 4/0 steel wool and Danish Oil. 5. Available in aerosol form for easy application. Lacquer for Brass Aerosol A lacquer for brass and other metals. The lacquer contains an antitarnish additive to keep metals bright, clean and new looking longer. Mohawk s "Lacquer for Brass will show excellent adhesion on a variety of metals and will maintain the high gloss brilliance of plating, including chrome. Product number: M Suitable for: Metals such as: brass, bronze, nickel, silver, tin, aluminium, etc Application method: Aerosol spray Net contents: 13oz/365gm 1. To protect metal surfaces and prevent tarnishing. 1. Excellent adhesion to metal surfaces. 2. Easy to use. 3. Quick drying. 4. Tarnish resistant formula. 5. Good wear properties. 6. Water-clear. 7. Non-yellowing. 92

94 Crackle Lacquer Crackle Lacquer creates a quick antique crackle-like finish when applied over a contrasting gloss such as Mohawk Coloured Lacquer. For example, black over white yields white visible in the cracks or clear over white simulates an antique white enamel finish. Effective only when a wet coat is applied with a spray gun over conventional gloss lacquer finish. Application method: Spray Net volume: 1 Gallon/3.78 litres 1. Quick results. 2. Self controlled results. 3. Can be glazed for antique effect. Individual Colours Available: M Crackle Lacquer Clear 1. Quick results. 2. Self controlled results. 3. Can be glazed for antique effect. 1. Must be clear coated for protection. 2. Self controlled results. 93

95 Tools & Hardware Mohawk Leveller Card The Leveller Card can be use with Quick Fill Burn-In Sticks, Epoxy Putty Sticks and to Fil-Stik Putty Stick to level, shape or remove excess product. Product number: M Use with: Epoxy Putty Stick Fil-Stik Putty Stick Quick Fill Burn-In Stick Finisher's Colourwheel From novice to pro, take your "turn" and find the colour you need every time. See how colours interact. Features a five colour intensity scale, to help match your desired shade. Twelve standard wood colours duplicated on birch veneer. Includes eighty different colour variations. A real time saver for matching colours. Product number: M Clear Bumper Disc Features: excellent non-skid, high coefficient of friction. Non-marring and non-staining. Permanently resilient - won't crack or harden. Excellent abrasion resistance, vibration and shock- damping. spacers for cabinet doors, lids, and drawers. Feet on the bottom of cabinetry, clocks, speakers, etc. Bumper Protectors for chairs, walls and sliding doors. Pads and Cushions for fans, small appliances, and furniture. Product number: M

96 Pressure Unit Spray Tool No hoses, compressors or wires. Sprays any thinned liquid. Portable industrial sprayer without the usual encumbrances. Utilizes the same principle as commercial spray guns. Replaceable power pack contains a liquid propellant that will spray up to 30 ounces of paint or other sprayable material. Precision preset spray head assures a perfect spray pattern. Ideal for maintenance and production jobs throughout the shop. Extra jars and caps available. Not recommended for waterborne paint. Product Code Power Pack Aerosol (6.5oz/184gm) complete with Head & Jar (4oz/28gm) M Power Pack Replacement Aerosol (6.5oz/184gm) M Power Pack Replacement Snap on Head M Power Pack Replacement Jar (4oz/118.29ml ) & Cap M Power Pack (Preval) Versatile for making your own aerosol. Ideal for stains, lacquers, paints, varnishes, shellac, cleaners, polishes, and epoxy coatings. Power Pack will dispense 16 oz. of liquid with the same fine spray as aerosol cans. For heavy spray. Extra available. Product Code Preval Power Pack (1.94oz/55gm Aerosol ) with Jar (1oz/29.5ml) M Preval Replacement Jar (6oz/177.4ml) & Cap M Preval Replacement Jar (1oz/29.5ml) & Cap M

97 Replacement Nibs Product Suitable for Acrylic Chisel Point Ultra Mark & E-Z Seal Pens Pack 24 M Acrylic Bullet Point Ultra Mark Pens Pack 24 M Acrylic Chisel Point Acrylic Bullet Point Polyester Bullet/Chisel Point Acrylic Brush/Chisel Point Background Marker, Background Marker Glaze Hang Up, Quik-Tip Marker Background Marker, Background Marker Glaze Hang Up, Quik-Tip Marker Background Marker, Background Marker Glaze Hang Up, Quik-Tip Marker Background Marker, Background Marker Glaze Hang Up, Quik-Tip Marker Background Marker, Background Marker Glaze Hang Up, Quik-Tip Marker Pack size Code Pack 12 M Pack 12 M Pack 12 M Pack 12 M Spray Heads Product Pack size Code Aerosol replacement spray head STANDARD Pack 12 M Aerosol replacement spray head FAN Pack 12 M High Volume Spray Head for Finishers Glazing Stain Pack 12 M Fine Spray Head Pack 12 M Fan Type Spray Head Pack 12 M Medium Spray Head Pack 12 M Heavy Spray Head Pack 12 M Large Button Cone Spray Head Pack 12 M Spray Head Replacement, Leather Repair Basecoat Pack 12 M Match All Graining Brush Product Code: M Excellent brush for graining. Tapered to a fine point. Red Sable Art Brush #3 Product Code: M

98 Mohawk Craftsman Apron Product Code: M Neck band and tie strings. Pencil and standard Pockets. Imprinted with Mohawk Finishing Products, Inc. Royal blue colour. 28 x 26 size. Neck strap: 24 Pro-Mark Marker Pouch (Empty) Product code: M Holds 24 Markers Keeps your Pro-Mark Touch Up Markers organized Colour selection is always visible Easy to carry pouch that holds 24 Pro-Mark Markers Made of Heavy-duty Nylon Rolls up and ties for easy handling Great for in the shop or on the truck Training and Literature Understanding Wood Finishing by Bob Flexner Highly recommended for any woodworker, from beginner to advanced. In Understanding Wood Finishing, you ll find: Tips for getting the perfect finish. Tricks for determining what kind of finish you re really buying. A handy chart telling which stains are compatible with which finishes. Step-by-step finishing schedules. Product number: M Wood Touch-Up And Repair DVD The Mohawk Wood Touch-Up and Repair Interactive Training System is designed to teach you the most up to-date wood touch-up and repair techniques offered in the industry. This interactive DVD will provide you with instructions in: damage analysis, filling of damages, replacing colour, grain replacement, spot finish application, sheen adjustment, scratch removal, finish care and much more. (120 Min) Product number: M The Mohawk Professional Finishing System DVD Designed to show you how to produce today's most popular finishes with our new Professional Finishing System products. You will be able to confidently recreate the finishes using an assortment of Mohawk's different finishing products. Product number: M

99 Repair Kits We also provide a range of professional repair kits for furniture, flooring and cabinets. If you would like more information about our repair kits, please contact us. FREE TRAINING: If you purchase a eligible Mohawk repair kit you will receive two days complementary training in the use of Mohawk products for timber touch-up and repair. Training is conducted four times a year (depending on demand) in small groups no more than ten people at the Multimaster offices in Sydney. Multimaster Australia Pty Ltd ABN: Kirrawee Business Centre 12/398 The Boulevarde Kirrawee NSW 2232 Phone: Fax: info@multimaster.com.au 98

100 Recommended Consumer Products Fil-Stik Putty Stick & Ultra Mark Marker Blister Pack...page 100 Fil-Stik Putty Stick...page 101 Pro-Mark Marker...page 102 Ultra Mark Marker...page 103 Ultra Bond Waterborne Clear Finish Marker...page 104 Blend-Its...page 105 Hydro Cleaner Wood Floor Cleaner...page 106 Hydro Cleaner Wood Floor Protector...page 106 Natural Wax Care for Natural Oiled and Prefinished Floors...page

101 Fil-Stik Putty Stick & Ultra Mark Marker Blister Pack A handy blister pack for quick touch-ups. Contains 1 x Fil-Stik Putty Stick and 1 x Ultra Mark Marker. 16 colour combinations available. Packs Available Product Number Colour M NATURAL M VAN DYKE BROWN M ALMOND/INTERIOR PUTTY M DEEP MAHOGANY M NEWPORT EBONISED CHERRY M MEDIUM BROWN WALNUT M DARK WALNUT Fil-Stik Putty Stick...page 100 Mohawk s Fil-Stik Putty Stick are the ultimate quick, convenient, mess free solution to nicks, nail holes, cracks, open corner joints, etc. Fil-Stiks are made from semi-hard putty, no heat or special tools are required, simply rub in and wipe off. Ultra Mark Markers...page 102 Mohawk s Ultra Mark Markers contain light-fast pigments which seal, stain and finish in one easy operation. They are compatible with all types of finishes, making them ideal for edge and scratch recolouring. For further protection, markers may be finished with Tone Finish Clears, or other topcoats, including: lacquers, acrylics, varnishes and urethanes. M CHERRY/NUTMEG M DARK RED MAHOGANY M EXTRA DARK WALNUT M BLACK/JAVA M WHITE M Kaffee M English Saddle M Earth Tone M Driftwood 100

102 Fil-Stik Putty Stick Individual Blister Packs Mohawk s Fil-Stik Putty Stick are the ultimate quick, convenient, mess free solution to nicks, nail holes, cracks, open corner joints, etc. Fil-Stiks are made from semi-hard putty, no heat or special tools are required, simply rub in and wipe off. Type: Semi-hard putty Durability: Low Adhesion: Low Dry time: Handle or topcoat immediately after application Ease of use: No experience or special tools required Suitable for: Vertical and horizontal surfaces 1. To refill small areas of damage, such as nicks, nail holes, cracks, open corner joints, etc. 1. No heat or special tools required. 2. Simply rub in and wipe off. 3. Fade resistant, non-bleeding permanent colours. 4. May be topcoated immediately with Ultra Bond Waterborne Clear Finish Marker or other coatings. 5. A wide range of stock colours are available. Use with: Mohawk Leveller Card Ultra Bond Waterborne Clear Finish Marker (or topcoat of your choice) Individual Colours Available in Blister Packs: M B Pine M B Old World Mahogany M B Rustic Cherry M B Medium Oak M B Cherry M B Heritage Oak M B Extra Dark Walnut M B Medium Brown Walnut M B White M B Light Walnut Note: we recommend sealing the repair with Tone Finish Flat Easy Sanding Sealer before using Ultra Bond Waterborne Clear Finish Marker to reduce colour transferring onto the marker sponge