SC20 MEETING MINUTES January 29, E&P Winter Standards Meeting InterContinental New Orleans New Orleans, Louisiana
|
|
- Jordan Harris
- 5 years ago
- Views:
Transcription
1 Introduction of Attendees SC20 MEETING MINUTES January 29, E&P Winter Standards Meeting InterContinental New Orleans New Orleans, Louisiana API Subcommittee on Supply Chain Management (SC20) Jerry Longmire (GE Oil & Gas), Chair Time: 8:00 AM 12:00 Noon Jerry Longmire, SC20 chair, opened the meeting. Those in attendance introduced themselves. A voting quorum was established. An attendance record was circulated. Approval of Agenda Agenda for the meeting was presented and approved. Review and Approval of Previous Meeting Minutes Minutes from the last meeting held in Chicago, Illinois at the 2014 E&P Standards Conference on Oilfield Equipment and Materials were approved. Status of SC 20 Standards Specification 20A Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum and Natural Gas Industry Rick Faircloth (Cameron), chair of the 20A Task Group, reported. Status: The First Edition of Spec. 20A was published March, 2012; Addendum 1 published October 2013 Action since last SC meeting: Addendum 2 was completed and ballotted successfully. Ballot resolution process is underway. Action for next SC meeting: Complete ballot resolution process for Addendum 2 and move document to publication. Licensing status: 1 licensee, no applicants. Specification 20B Open Die Shaped Forgings for Use in the Petroleum and Natural Gas Industry Joel Russo (FMC), chair of the 20B Task Group, reported. Status: First edition published April Licensing status: 5 licensees, 14 applicants. Action for next SC meeting: N/A 1
2 Specification 20C Closed Die Forgings for use in the Petroleum and Natural Gas Industry Gary Kingry (Ellwood Texas Forge Co.), chair of the 20C Task Group, reported. Status: First edition published October 2009; due for 5-year review. Action since last SC meeting: Work is ongoing for the 2nd Edition and we expect to go to ballot in the 1st Qtr Action for next SC meeting: Complete ballot resolution process for 2 nd Edition and move document to publication. Licensing status: 6 licensees, 3 applicants. Standard 20D - Non-Destructive Examination (NDE) Services for Equipment Manufactured in accordance with API Product Specification used in the Petroleum and Natural Gas Industry Jerry Longmire (GE Oil & Gas), reported on the status for this Task Group as the chair, Jim Harris (GE Oil & Gas) has resigned. Bart Bartholomew, FMC appointed to take over the work of this Task Group. Status: First edition published September Action for next SC meeting: Reconvene the TG to review issues identified in the color coding process which is expected to require Addendum 1. Registration status: API Staff has advised that an organization can appy for registration to API Spec Q1 with a scope of API Std 20D. Specification 20E - Alloy and Carbon Steel Bolting for use in the Petroleum and Natural Gas Industry Tom Goin (TSP), chair of the 20E Task Group, reported. Status: The First Edition was published October 1, Action for next SC meeting: N/A Licensing status: 6 licensees, 4 applicants. Specification 20F - Stainless Steel and CRA Bolting for use in the Petroleum and Natural Gas Industry Tom Goin (TSP), chair of the 20F Task Group, reported. Action since last SC meeting: The first ballot of this document has passed and is in the ballot resolution process. Action for next SC meeting: Continue work on resolving the ballot comments and the TG has a target for publication in the 3 rd Qtr Standard 20G - Qualification of Welding Suppliers for Equipment Used in the Petroleum and Natural Gas Industry Jerry Longmire (GE Oil & Gas), chair of SC20 reported. Status: Bud Weightman, (Qualified Specialists), Inc. has resigned as chair of this TG with no action completed. SR3 reviewed and approved by the SC20 on January 28, Action for next SC meeting: Convene the TG and begin work on the first draft. 2
3 Standard 20H - Heat Treatment Services for Equipment Manufactured in accordance with API Product Specifications used in the Petroleum and Natural Gas Industry Joel Russo (FMC), chair of the 20H Task Group, reported. Action since last SC meeting: Work is progressing on the 1st Edition with monthly TG meetings. We expect to have this work completed by late Action for next SC meeting: Ballot, complete ballot resolution process and move document forward to publication. Standard 20J - Distributors of Metallic Materials for Use in the Petroleum and Natural Gas Industries Rick Faircloth (Cameron) reported on the work of the 20J Task Group on behalf of Des Burnley (Baker Hughes), TG Chair. Status: Scope has been defined, and processes defined that distributors can be qualified to perform. Action since last SC meeting: TG has had routine meetings and has been actively working on the first draft. Action for next SC meeting: Continue work on the first draft with report out at the June 2015 meeting. Standard 20K - Qualification of Suppliers of Non-Metallic Seals for Equipment Used in the Petroleum and Natural Gas Industry Jerry Longmire (GE Oil & Gas), chair of SC20 reported on this TG. Neal Ferguson, Element has agreed to chair this Task Group. Status: SR3 reviewed and approved by the SC20 on January 28, Action for next SC meeting: Convene the TG and begin work on the first draft. Qualification of Suppliers of Plating and Coating for Equipment Used in the Petroleum and Natural Gas Industry Ian MacMoy (DOXSTEEL) made a presentation identifing issues with plating and coating issues and a proposal to begin work on a document to address this issue. SC20 agreed to form an ADHOC work group to explore this issue, define scope of work and report at the next SC20 meeting. New Business Status on the API Monogram Program Austin Freeman (BP) updated the group on the status and upcoming changes for the API Monogram program. Registration for SC20 Standards Aaron Duke (API) advised the group that SC20 standards would not be included in the Monogram Program. He also advised that an organization can apply for registration to API Spec Q1 with a scope based on the 20 series standards such as API Standard 20D. Minimum facility requirements Rick Faircloth (Cameron) updated the group on how minimum facility requirements had been addressed in other API Specifications and encouraged the TG s to consider this issue in the next revision or first edition of new work. 3
4 ASTM F16 Workshop on Hydrogen Embrittlement Avoidance in Mechanical Fasteners - Focus on the Oil & Gas Industry Lester Burgess (TSP) advised the group regarding a planned workshop to review this issue (Attachment 1). JIP Steel forgings for subsea applications William Vangeertruyden (ExxonMobil) updated the committee on the work of the DNV group developing an RP for Subsea forgings. (Attachment 2) Future standards - Still under consideration: List of possible future standards : - Heat treatment in continuous furnaces. - Metallic coating and plating supplier qualification. Next Meeting The next meeting of SC20 will be at the E&P Standards Conference on Oilfield Equipment and Materials in San Francisco, California, June 22-28,
5 Attachment 1 Page 1 0f 2 5
6 Attachment 1 Page 2 of 2 Attachment 2 6
7 Page 1 0f 2 7
8 Attachment 2 Page 2 0f 2 8
MINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2016 Winter Committee Meeting Houston, TX Wednesday, January 13, 2016
MINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2016 Winter Committee Meeting Houston, TX Wednesday, January 13, 2016 John Bednar, Chairman Brian Skeels, (Co) Vice-Chairman Ross Frazer,
More information2015 Exploration & Production Winter Standards Meeting Subcommittee 10. January 27-29, 2015 Intercontinental Hotel New Orleans, LA
2015 Exploration & Production Winter Standards Meeting Subcommittee 10 January 27-29, 2015 Intercontinental Hotel New Orleans, LA Subcommittee on Well Cements (SC10) Agenda Tuesday, January 27 th, 2015
More information2014 Exploration & Production Standards Conference Subcommittee 10. January InterContinental Dallas Addison, Texas
2014 Exploration & Production Standards Conference Subcommittee 10 January 21-23 2014 InterContinental Dallas Addison, Texas Subcommittee on Well Cements (SC10) Agenda Tuesday, January 21, 2014 8:00 8:15
More informationb. A roll call was completed and confirmed that there was a quorum of 22 present for this meeting (a minimum of 15 is required).
MINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2017 Summer Committee Meeting Lloyd s Register Training Center, Houston, Texas Wednesday, June 14, 2017 Brian Skeels, (Co) Vice-Chairman Ross
More informationJohn Bednar, Chairman
MINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2016 Summer Committee Meeting Grand Hyatt Hotel, Washington DC Wednesday, June 29 th 2016 John Bednar, Chairman Brian Skeels, (Co) Vice-Chairman
More informationMinutes of Meeting. Meeting attendees introduced themselves. Record of Meeting Attendance is included in the minutes.
Minutes of Meeting 2009 Exploration & Production Standards Conference on Oilfield Equipment and Materials Meeting Tuesday, June 23, 2009 Drilling Well Control Equipment SC16 8:30 am 12:00 pm Chair: Mel
More informationAPI 17G Update. API SC17 Summer Meeting 12 Jun API 17G Monthly Leadership Update 1
API 17G Update API SC17 Summer Meeting 12 Jun 2018 05/31/2018 API 17G Monthly Leadership Update 1 Agenda task group leadership how we re working where we are today results from ongoing reviews where we
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationOverview and Update of API Standards
Overview and Update of API Standards IADC South East Asia Chapter Meeting Kuala Lumpur, Malaysia March 21, 2017 Eric Ho American Petroleum Institute Singapore Scope of Presentation API Background API Standards
More informationThe Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing
The Evolution & Future of API Coiled Tubing Standards Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing API Overview Presentation Outline Resource Group on Coiled Tubing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21457 First edition 2010-09-01 Petroleum, petrochemical and natural gas industries Materials selection and corrosion control for oil and gas production systems Industries du
More information1. John Bednar, API SC 17 Chairman, welcomed the group to the meeting at 8:00 AM and outlined various safety and housekeeping issues.
MINUTES 84 th Exploration and Production Standards Conference on Oilfield Equipment and Materials 22 nd Joint Meeting API SC 17 & ISO/TC67/SC4/WG6 Subsea Production Equipment San Francisco, California
More informationAPI Standards Overview
32 nd Gas-Lift Workshop The Hague, The Netherlands February 2-6, 2009 API Standards Overview Roland Goodman Upstream Standards Manager American Petroleum Institute This presentation is the property of
More informationMINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2015 Winter Committee Meeting Houston, Texas (BP Westlake Location) January 20, 2015
MINUTES API Subcommittee 17 (SC17) Subsea Production Equipment 2015 Winter Committee Meeting Houston, Texas (BP Westlake Location) January 20, 2015 John Bednar, Chairman Brian Skeels, (Co) Vice-Chairman
More informationAugust 2015 Fastener Industry Technology Update from the IFI
INDUSTRIAL FASTENERS INSTITUTE August 4, 2015 August 2015 Fastener Industry Technology Update from the IFI 1. Standards Organizations Activities a. Standards published recently: i. ASTM A563 - Standard
More informationMcDermott International, Inc. (Exact name of registrant as specified in its charter)
UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM SD Specialized Disclosure Report McDermott International, Inc. (Exact name of registrant as specified in its charter) REPUBLIC
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7380-2 First edition 2011-08-01 Button head screws Part 2: Hexagon socket button head screws with collar Vis à tête cylindrique bombée plate Partie 2: Vis à tête cylindrique
More information19th Joint Meeting of ISO/TC67/SC4/WG6 and API SC17 Atlanta Hilton Hotel API Summer Standards Conference Atlanta, GA
19th Joint Meeting of ISO/TC67/SC4/WG6 and API SC17 Atlanta Hilton Hotel API Summer Standards Conference Atlanta, GA June 14, 2005 Joint Meeting - 8:00 am 1. Opening of the meeting (Bednar/Inderberg) 2.
More informationMcDermott International, Inc. Conflict Minerals Policy
McDermott International, Inc. Conflict Minerals Policy On August 22, 2012, the final rule regarding sourcing of conflict minerals under Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection
More informationISO INTERNATIONAL STANDARD. Hexalobular socket pan head screws. Vis à métaux à tête cylindrique bombée large à six lobes internes
INTERNATIONAL STANDARD ISO 14583 Second edition 2011-03-15 Hexalobular socket pan head screws Vis à métaux à tête cylindrique bombée large à six lobes internes Reference number ISO 14583:2011(E) ISO 2011
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange Small series Product grade A
INTERNATIONAL STANDARD ISO 15071 Second edition 2011-06-01 Hexagon bolts with flange Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique Série étroite Grade A Reference number
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number ISO 10684:2004(E) ISO 2004 PDF
More informationDraft MINUTES, Revision 1 API SC 17 Subsea Production Equipment 2012 Winter Meeting Houston, Texas January 19, 2012
Draft MINUTES, Revision 1 API SC 17 Subsea Production Equipment 2012 Winter Meeting Houston, Texas January 19, 2012 John Bednar, Chair Gary Hurta, (Co) Vice Chair Brian Skeels, (Co) Vice Chair Ross Frazer
More informationCommittee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation Roland Goodman Manager, Upstream Standards goodmanr@api.org New Member Orientation Presentation will cover:
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10424-2 First edition 2007-11-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Threading and gauging of rotary shouldered thread connections Industries
More informationCommittee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation Roland Goodman Manager, Upstream Standards goodmanr@api.org New Member Orientation Presentation will cover:
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10511 Third edition 2012-12-15 Prevailing torque type hexagon thin nuts (with non-metallic insert) Écrous hexagonaux bas autofreinés (à anneau non métallique) Reference number
More informationUpstream / Upstream Safety Sessions
Upstream / Upstream Safety Sessions U01 API Spec Q2 Our Journey to theworld s First Oil and Gas Quality Management System Standard for Service Supply Organizations Euan Ramsay, Regional Business Development
More informationAPI C2 / SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS
API C2 / SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS API 17Y Subsea chemical injection system - Recommended Practice for Design, Testing & Operations REVISION TASK GROUP STATUS JUNE 2017 1. INTRODUCTION
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationTailor Made. Create your unique subsea valve
Tailor Made Create your unique subsea valve Our engineers have developed a comprehensive range of subsea valves, operators and hydraulic actuators to deliver complete tailor made packages meeting the highest
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4026 Third edition 2003-12-01 Hexagon socket set screws with flat point Vis sans tête à six pans creux, à bout plat Reference number ISO 4026:2003(E) ISO 2003 ISO 4026:2003(E)
More informationAPI C2 / SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS
API C2 / SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS API 17F Subsea Production Control Systems TASK GROUP STATUS JUNE 2017 1. INTRODUCTION API 17F Third Edition was published in May 2014. The latest
More informationTel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
More informationMECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days
Training Title MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days Training Dates & Venue REF ME091 Mechanical Engineering Fundamentals 5 28 Aug 01 Sep $4,250 Abu Dhabi, UAE Training will be held
More informationISO INTERNATIONAL STANDARD. Visual examination of the surface condition of investment castings Steel, nickel alloys and cobalt alloys
INTERNATIONAL STANDARD ISO 19959 First edition 2005-04-01 Visual examination of the surface condition of investment castings Steel, nickel alloys and cobalt alloys Examen visuel de l'état de surface des
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationUpdate on API and ISO Gas-Lift Standards and Recommended Practices
31 st Gas-Lift Workshop Houston, Texas February 4-8, 2008 Update on API and ISO Gas-Lift Standards and Recommended Practices Jim Hall, Shell International EP Wayne Mabry, Schlumberger Cleon Dunham, Oilfield
More information21st Joint Meeting of ISO/TC67/SC4/WG6 and API SC17 Technip Building Old Katy Road Houston, TX. February 7, 2007 Joint Meeting - 8:30 am
21st Joint Meeting of ISO/TC67/SC4/WG6 and API SC17 Technip Building 11700 Old Katy Road Houston, TX February 7, 2007 Joint Meeting - 8:30 am 1. Opening of the meeting (Bednar/Inderberg) 2. Roll call/roster
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
INTERNATIONAL STANDARD ISO 13628-5 Second edition 2009-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals Industries du pétrole et du
More informationAnnual Report to ISO TC67 / SC4 For 2005 Plenary Meeting May 12-13, 2004 Milan, Italy
ISO/TC 67/SC4/WG1 ISO/TC 67/SC 4 N 313 Materials, equipment and offshore structures for petroleum and natural gas industries: Drilling and Production Equipment Annual Report to ISO TC67 / SC4 For 2005
More informationCOMPLETE MILITARY CERTIFICATIONS OVER
MILITARY HARDWARE WITH COMPLETE MILITARY CERTIFICATIONS OVER 2,000 ITEMS Machine Screws MS24693 100 Flat Phillips 18-8 Stainless DFAR COMPLIANT 18-8 SS w/ Black Oxide Finish DFAR COMPLIANT MS35190 82 Flat
More informationISO 5858 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
INTERNATIONAL STANDARD ISO 5858 Second edition 1999-11-15 Corrected and reprinted 2000-11-15 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
More informationMINUTES OF MEETING OF SUBCOMMITTEE 6 ON VALVES AND WELLHEAD EQUIPMENT June 15, 2006 Hilton Atlanta Hotel Atlanta, Georgia
MINUTES OF MEETING OF SUBCOMMITTEE 6 ON VALVES AND WELLHEAD EQUIPMENT June 15, 2006 Hilton Atlanta Hotel Atlanta, Georgia 1. OPENING REMARKS George Huntoon Call to Order and Introductions Meeting called
More informationCode for Construction of Industrial Metallic Piping Engineering
UllC NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA p r:fl ~A ~~'Jl IE r@ ~t"flit GB 50235-2010 Code for Construction of Industrial Metallic Piping Engineering GB 50235-2010 -- How to BUY & immediately
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationAPI COPM CPMA Chapter 20.X
API COPM CPMA Chapter 20.X David Courtney Pamela Chacon Matt Zimmerman Dan Cutting 24 23 February 2017 Houston, TX Copyright 2017, Letton Hall Group. This paper was developed for the UPM Forum, 22 23 February
More informationDRILLING 101 COURSE. March 11, 2019 Hyatt Regency Houston Houston, TX. FUNDAMENTALS OF WELL COMPLETIONS MARCH 12, 2019 Houston, TX RELATED EVENT:
COURSE DRILLING 101 March 11, 2019 Hyatt Regency Houston Houston, TX RELATED EVENT: FUNDAMENTALS OF WELL COMPLETIONS MARCH 12, 2019 Houston, TX (Receive discounted registration for attending both events!)
More informationISO Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7040 Third edition 2012-12-15 Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10 Écrous hexagonaux
More informationAmerican Galvanizers Association Technical Services Committee
American Galvanizers Association Technical Services Committee Minutes of Regular Meeting of December 11th, 2013 Meeting # 111 AGA Offices, Centennial, Colorado I- Call to Order and Anti-Trust Guidelines
More informationIS INTERNATIONAL STANDARD. Slotted countersunk flat head screws (common head style) - Product grade A. Vis 9 mktaux d t&e fraisee fendue -
INTERNATIONAL STANDARD IS0 2009 Third edition 1994-04-01 Slotted countersunk flat head screws (common head style) - Product grade A Vis 9 mktaux d t&e fraisee fendue - Grade A Reference number IS0 2009:1994(E)
More informationWells Expert Committee Bulletin
COMMITTEE UPDATE DECEMBER 2016 Issue no. 2 Wells Expert Committee Bulletin The Global Industry Response Group (GIRG) was created in July 2010 with a remit to identify, learn and apply the lessons of Macondo
More informationISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin
INTERNATIONAL STANDARD ISO 12474 First edition 2010-10-01 Hexagon socket head cap screws with metric fine pitch thread Vis à tête cylindrique à six pans creux à pas fin Reference number ISO 12474:2010(E)
More informationISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
INTERNATIONAL STANDARD ISO 16812 Second edition 2007-02-15 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers Industries du pétrole, de la pétrochimie et du gaz naturel
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Offshore production installations Basic surface process safety systems
INTERNATIONAL STANDARD ISO 10418 Second edition 2003-10-01 Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Industries du pétrole et du gaz naturel
More informationISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
INTERNATIONAL STANDARD ISO 7041 Fourth edition 2012-05-15 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Écrous hexagonaux autofreinés (à anneau non métallique),
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number
More informationFREQUENTLY ASKED QUESTIONS to the SOME:
WELCOME to the API Subcommittee on Mechanical Equipment (SOME). As chairman of the SOME, I would like to assist you in discovering how you can be a part of an elite group that develops the most comprehensive
More informationNOIA ANNUAL MEETING CONCERNS/INITIATIVES. BSEE Update. Joe Levine BSEE Washington DC April 11, 2014
NOIA ANNUAL MEETING Technology BSEE OCS Policy TECHNOLOGY Committee CONCERNS/INITIATIVES BSEE Update Joe Levine BSEE Washington DC April 11, 2014 Presentation Overview BSEE Research Program Research Drivers
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7051 Second edition 2011-08-01 Cross-recessed raised countersunk (oval) head tapping screws Vis à tôle à tête fraisée bombée à empreinte cruciforme Reference number ISO 7051:2011(E)
More informationCATALOG FOR PRESSURE CONTROL EQUIPMENT. Supplement 3 API CONNECTOR ACCESSORIES. Ring Gaskets, Flange Bolts and Nuts, Hammer Wrenches TRADEMARK WOODCO
CATALOG FOR PRESSURE CONTROL EQUIPMENT Supplement 3 API CONNECTOR ACCESSORIES Gaskets, Flange Bolts and Nuts, Hammer Wrenches This catalog supplement provides information to allow selection and accurate
More informationEngineering Services Program
GDR41 1214 Product Evaluation Engineering Services Program The following product has been evaluated for compliance with the wind loads specified in the International Residential Code (IRC) and the International
More informationISO INTERNATIONAL STANDARD. Fasteners Non-electrolytically applied zinc flake coatings
INTERNATIONAL STANDARD ISO 63 First edition 2000-07-1 Fasteners Non-electrolytically applied zinc flake coatings Éléments de fixation Revêtements non électrolytiques de lamelles de zinc Reference number
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15547-2 First edition 2005-11-01 Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 2: Brazed aluminium plate-fin heat exchangers Industries
More informationISO 8752 INTERNATIONAL STANDARD. Spring-type straight pins Slotted, heavy duty
INTERNATIONAL STANDARD ISO 8752 Third edition 2009-06-15 Spring-type straight pins Slotted, heavy duty Goupilles cylindriques creuses, dites goupilles élastiques Série épaisse Reference number ISO 8752:2009(E)
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15547-1 First edition 2005-11-01 Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers Industries du pétrole,
More informationGrant agreement No ShaleXenvironmenT. Maximizing the EU shale gas potential by minimizing its environmental footprint
Grant agreement No. 640979 ShaleXenvironmenT Maximizing the EU shale gas potential by minimizing its environmental footprint H2020-LCE-2014-1 Competitive low-carbon energy D12.7 DCO and Doha international
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationSafe Marine Transfer LLC Meeting Minutes Final Project Presentation to RPSEA WPG; July 14, :30 AM 2:30 PM
526 Little John Lane Houston, TX 77024 713-681-1482 main office Meeting: Location: Safe Marine Transfer LLC Meeting Minutes Final Project Presentation to RPSEA WPG; July 14, 2016 8:30 AM 2:30 PM Helix
More information1 ZSI Product Experience Examples
www.zsind.com 1 ZSI Product Experience Examples www.zsind.com 2 Casting and machining (1) 1 Material: Grey Iron GG25 Process: Sand Casting Vacuum Pump 2 Material: Cast Iron GG25, GGG40 Process: Sand Casting
More informationISO/TC67/SC4 Work Group 4 Annual Report
ISO/TC67/SC4 Work Group 4 Annual Report 2007-2008 1. Convenor information. Mr. Bert Dijkhuis (Convenor) Van Bommellaan 16 2245 VN Wassenaar The Netherlands Tel. +31 (0)70 517 8976 E-mail edykhuis@wanadoo.nl
More informationFormation of a standing Subsea committee in IOGP and the prioritized work areas for the committee. Roald Sirevaag IOGP Subsea committee chair
Formation of a standing Subsea committee in IOGP and the prioritized work areas for the committee Roald Sirevaag IOGP Subsea committee chair About IOGP Wherever you are Wherever you go... Whatever you
More informationAPI RP 53 Recommend Practices for Blowout Prevention Equipment Systems for Drilling Wells vs. Standard 53 4 th Edition 2011
API RP 53 Recommend Practices for Blowout Prevention Equipment Systems for Drilling Wells vs. Standard 53 4 th Edition 2011 Meeting with BOEMRE March 1, 2011 Presented by: Frank Gallander Chevron Chair
More informationSpecification for Subsea Umbilicals
Specification for Subsea Umbilicals Upstream Segment ANSI/API SPECIFICATION 17E FOURTH EDITION, OCTOBER 2010 EFFECTIVE DATE: APRIL 1, 2011 ISO 13628-5:2009 (Identical), Petroleum and natural gas industries
More informationDevelopments and presence in Oil and Gas industries
Developments and presence in Oil and Gas industries Daniel Reuithe, Market Development Engineer Francois Weisang-Hoinard, Senior Product Manager May 27, 2015 Content Overview of Outokumpu s offering to
More informationISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes
INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Hexagon socket head cap screws Vis à tête cylindrique à six pans creux Reference number ISO 4762:2004(E) ISO 2004 PDF disclaimer This PDF file
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationShell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015
Shell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015 Special Notes API publications necessarily address problems of a general nature. With respect to particular circumstances, local,
More informationCertifications and Licenses
Company OMPA is a qualified Oilfield Machine Shop with over 40 years experience in Manufacturing of Custom Designed Equipment, Threading Service and Precision Machining Service. It operates on a total
More informationCommittee E44 on Solar, Geothermal and Other Alternative Energy Sources
Committee E44 on Solar, Geothermal and Other Alternative Energy Sources Formed in 1978 Meets once a year during November Committee Week Current membership of approximately 70 Jurisdiction over 49 standards
More informationRecommended Practice for Flexible Pipe
Recommended Practice for Flexible Pipe ANSI/API RECOMMENDED PRACTICE 17B FOURTH EDITION, JULY 2008 Document includes Technical Corrigendum 1, dated June 2008 ISO 13628-11:2007 (Identical), Petroleum and
More informationONE SOURCE. Vol 4 FOR ALL YOUR FASTENER TOOLING NEEDS
ONE SOURCE Vol 4 FOR ALL YOUR FASTENER TOOLING NEEDS FASTENER PRODUCTS PLANETARY DIES OSG Planetary Dies are produced in many different sizes for all machine makes and models. They are precision ground
More informationDTFACT 16 C IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION
DTFACT 16 C 00047 IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION IESALC Fall Technology Meeting Government Contacts Subcommittee Dallas, TX October 23, 2017 Jeremy N. Downs,
More informationEngineering Test Report
Engineering Test Report Thermal Diffusion Galvanizing Report Poleline Hardware 02/01/2018 Allied Bolt s Thermal Diffusion Galvanizing Allied Bolt announces the launch of Thermal Diffusion Galvanized Poleline
More informationNew Standard: ASME N511
New Standard: ASME N511 In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air Conditioning Systems System Engineering Perspectives by Mark E. Pest Environmental Habitat / Information
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 193-1 First Edition 2018-09-dd Steel wires and wire products for fencing Part 1: Barbed wires Specification Reference number UNBS 2018 Compliance with this standard does not,
More informationISO/TC 67/SC 4 N 267 ISO/TC 67 N
Secretariat: ISO/TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries - Drilling and production equipment American Petroleum Institute, 1220 L
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15156-3 Third edition 2015-09-01 Petroleum and natural gas industries Materials for use in H2Scontaining environments in oil and gas production Part 3: Cracking-resistant CRAs
More informationITF Subsea Processing Initiative. Ian McCabe - Technology Project Team Leader
ITF Subsea Processing Initiative Ian McCabe - Technology Project Team Leader Scope Background to ITF Membership The Collaborative Technology Space Why ITF? Subsea Processing Initiative Low Cost Separator
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28781 First edition 2010-08-15 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment Industries du pétrole et
More informationSPOOLBASE & MULTIJOINT SERVICES
SPOOLBASE & MULTIJOINT SERVICES PIPELINE FABRICATION COMPANY PROFILE Pipeline Technique is a world leading provider of solutions to the oil and gas industry for the most demanding challenges in Welding,
More informationMINUTES OF THE CORPORATION MEETING HELD ON WEDNESDAY 19 TH MARCH 2014
APPROVED MINUTES MINUTES OF THE CORPORATION MEETING HELD ON WEDNESDAY 19 TH MARCH 2014 Present: P Brennan-Barrett (Principal) S Cooper G Crowe C Francis (Student) P Hilton S Hillyard (Staff) A Mochan R
More informationNDT KONFERANSEN ZENOVIEA VOROSCIUC
NDT KONFERANSEN 2011 ZENOVIEA VOROSCIUC Short about FMC Expectations Requirements New Challenges. New Solutions. 2 FMC Technologies Subsea Eastern ~ 150% growth from 2004-2010 MUSD Revenue Employees ER
More informationPANEL DESCRIPTIONS. (All Panels are Industry-Wide)
Tuesday, January 31, 2017 PANEL DESCRIPTIONS (All Panels are Industry-Wide) Solving Difficult Bolted Joint Problems This 90 minute panel session is designed for knowledge sharing on the topic of challenging
More informationThe use of Mechanical Connectors throughout Life of Field
The use of Mechanical Connectors throughout Life of Field Andrew Woodward Subsea Sales Engineer andrew.woodward@hydratight.com 1 What I will cover Safety Moment Introduction to Hydratight What are Mechanical
More informationCURVED TILE ROOF HOOK FOR BOTTOM MOUNT RAILS; ADJUSTABLE
CURVED TILE ROOF HOOK FOR BOTTOM MOUNT RAILS; ADJUSTABLE Part # Box Quantity Screw Size 17524 10 Hooks N/A 17525 1 Hook N/A 17526 10 Hooks; 20 Screws #14 x 3 17527 1 Hook; 2 Screws #14 x 3 Letter Description
More informationONSHORE SERVICES PIPELINE CONSTRUCTION
ONSHORE SERVICES PIPELINE CONSTRUCTION COMPANY PROFILE Pipeline Technique is a world leading provider of solutions to the oil and gas industry for the most demanding challenges in Welding, Non Destructive
More information