The Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing
|
|
|
- Earl Garrett
- 5 years ago
- Views:
Transcription
1 The Evolution & Future of API Coiled Tubing Standards Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing
2 API Overview Presentation Outline Resource Group on Coiled Tubing API CT Documents RP 5C7 RP 16ST 5ST API Certification Process Future Plans for API CT Documents RP 5C8
3 API Overview / Background
4 What is API? American Petroleum Institute Trade association representing all aspects of America s oil and natural gas industry Areas of work within API: Advocacy Research & Statistics Standards Certification Education
5 API Standards Structure API started publishing standards in 1924 Currently over 500 standards are controlled API is an American National Standards Institute (ANSI) accredited standards developing organization. API produces standards, recommended practices, specifications, technical publications, reports and studies that cover each segment of the industry.
6 API Standards Structure All standards are controlled by the Committee on Standardization of Oilfield Equipment and Materials (CSOEM) This committee is broken into 13 different subcommittees The committee directly related to Coiled Tubing is Subcommittee 5 (SC5) for Tubular Goods.
7 API Standards Structure
8 API Subcommittee 5 The subcommittee is further broken into the following Task/Resource Groups: OCTG (Casing, Tubing & Drill Pipe) Pipe Threads Coiled Tubing Line Pipe Drill Stem Equipment
9 API Resource Group on Coiled Scope: Tubing Maintain current standards (5LCP, 5ST) Currently working on RP 5C8 (Care & Maintenance of CT) Propose and work on items relevant to coiled tubing Participation: CT Manufacturers and service companies, Integrated oil & gas companies, consultants
10 API Coiled Tubing Documents RP 5C7 Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services RP 16ST Recommended Practice for Coiled Tubing Well Control Equipment 5ST Specification for Coiled Tubing RP 5C8 Recommended Practice for Care & Maintenance of Coiled Tubing 5LCP Specification for Coiled Line Pipe
11 API RP 5C7 Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services
12 API RP 5C7 History: Created in 1996 to meet the need for design and operating recommendations for the CT industry Re-affirmed twice before being withdrawn in 2009 Scope: Mainly for cased hole work overs and drilling, with some manufacturing properties included Impact: Misplaced as main focus was about well control and drilling, and issued within the tubing subcommittee.
13 API RP 5C7 Most of the document moved to RP 16ST with manufacturing related areas moved to 5ST API RP 5C7 (1996) Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services API Spec 5ST (2010) Specification for Coiled Tubing API RP 16ST (2009) Coiled Tubing Well Control Equipment Systems
14 API RP 16ST Recommended Practice for Coiled Tubing Well Control Equipment
15 History: API 16ST First Edition in 2009; born from data within RP 5C7, and expanded with help from more relevant resource group Scope: Well control equipment assembly & operation used in CT intervention and drilling applications
16 API 16ST Comparison with IRP-21: IRP-21 is broader in scope, the common element is well control 16ST has no reference to sour service Impact: Some US companies are advertising compliance with this RP.
17 API 5ST Specification for Coiled Tubing
18 API 5ST Specification for Coiled History: Tubing Began as a draft in late 90 s early 00 s, but was never embraced by manufacturers. Manufacturer involvement in 2007 revived the draft with further development leading to approval and release for use in 2010
19 API 5ST Specification for Coiled Tubing Scope: Controls the requirements for the manufacturing of down hole coiled tubing:» Material Requirements» Chemistry, Properties» Processes of manufacture» Welding, traceability» Dimensional requirements» OD, Wall Thickness» Testing» Destructive and Non-Destructive» Marking» Tubing identification» Document Control» Certifications
20 API 5ST Specification for Coiled Tubing Comparison with IRP-21: Small differences in mechanical properties and chemistry requirements More in depth mechanical properties and NDT as IRP-21 is more field related in content Impact: Filled a gap where no specification for manufactured coiled tubing existed.
21 The API Certification Process
22 API Certification Process Manufacturer must have an accredited Quality Management System (QMS) that meets the standards of API Q1 or ISO A full audit is performed by API of the product and process per the relevant standard: API 5LCP Specification for Coiled Line Pipe Used for TCT pipeline projects and products (X65, X70 tubing grades) API 5ST Specification for Coiled Tubing Used for TCT downhole products (CT70, CT80, CT90 and CT110)
23 API Certification Process Tenaris is approved to manufacture product in accordance with 5LCP (License #: 5LCP- 0001) & 5ST (License #: 5ST-0001) Currently the only manufacturer licensed to manufacture and monogram coiled line pipe and coiled tubing products in accordance to these standards.
24 Future of API Coiled Tubing Standards API RP 5C8 Recommended Practice for Care & Maintenance of CT Provide definitions/glossary of terms related to CT Properties influence on used CT Corrosion and impact to serviceability NDE of used CT Welding of used CT Assessment of fatigue and impact to serviceability Photographs of manufacturing & field related defects
25 Future of API Coiled Tubing Standards API 5ST Specification for Coiled Tubing Inclusion of ultrasonic inspection option for bias welds Qualification standards for new coiled tubing grades and raw material sources
26 Fatigue Future of API Coiled Tubing Standards Resource group has identified this as a key performance property. Work Item currently to address a standard fatigue test. Potential for technical brief or recommendations to include: Different types of fatigue test machines Standards for testing (orientation of welds, number of tests, etc ) Goal is to educate people on fatigue testing and work towards harmonizing the results obtained from these tests.
27 Sour Service Future of API Coiled Tubing Standards Resource group has identified this as a key performance property. Currently no work item exists to address CT in sour environments While currently little push within the group, this could be a future endeavor to benefit the coiled tubing industry.
28 Summary API has a resource group that works specifically on coiled tubing A specification (API 5ST) has been published for procurement of coiled tubing The future of API coiled tubing documents includes: RP on care & maintenance (5C8) Upgrades to the manufacturing specification (5ST) Potential technical briefs about fatigue and sour service
29 ? Questions?
The CTRM Newsletter. The Motley Fool for the CT Industry? Why CTRM? February 2008 Issue
February 2008 Issue 2008-1 Coiled Tube Resource Management (281) 657-3333 The Motley Fool for the CT Industry? This is our first newsletter. We want to make it both interesting and informative. The Motley
API Standards Overview
32 nd Gas-Lift Workshop The Hague, The Netherlands February 2-6, 2009 API Standards Overview Roland Goodman Upstream Standards Manager American Petroleum Institute This presentation is the property of
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation Roland Goodman Manager, Upstream Standards goodmanr@api.org New Member Orientation Presentation will cover:
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation
Committee on Standardization of Oilfield Equipment & Materials (CSOEM) New Member Orientation Roland Goodman Manager, Upstream Standards goodmanr@api.org New Member Orientation Presentation will cover:
Overview and Update of API Standards
Overview and Update of API Standards IADC South East Asia Chapter Meeting Kuala Lumpur, Malaysia March 21, 2017 Eric Ho American Petroleum Institute Singapore Scope of Presentation API Background API Standards
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du
Research & Development
Research & Development This global network is a fundamental component in Tenaris s approach to serving the customer. Innovation that fuels growth At Tenaris, we aim to raise the quality and range of our
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28781 First edition 2010-08-15 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment Industries du pétrole et
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10424-2 First edition 2007-11-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Threading and gauging of rotary shouldered thread connections Industries
Certifications and Licenses
Company OMPA is a qualified Oilfield Machine Shop with over 40 years experience in Manufacturing of Custom Designed Equipment, Threading Service and Precision Machining Service. It operates on a total
GAS FORUM RAMADA PARC HOTEL, BUCHAREST OCTOBER 3 RD, 2012
ROMANIA GAS FORUM RAMADA PARC HOTEL, BUCHAREST OCTOBER 3 RD, 2012 AGENDA INTRODUCING IPM-PARTNERS PROJECTS SNAPSHOTS PROJECTS SNAPSHOTS - ONGOING TECHNICAL INSPECTIONS-OVERVIEW TECHNICAL INSPECTIONS- WHY?
Certificate of Registration
Pipe Inspection Non-destructive Testing (NDT), storage and maintenance services for new and used oil country tubular goods (OCTG), line Pipe and drilling equipment (pipe and tools). Industrial NDT Nondestructive
API Buttress Connections
IDM Code GDL00382/2 / March 2018 API Buttress Connections Scope These guidelines apply specifically to the use of API Buttress connections. This document is based on API 5C1 standard which is the main
Specification for Subsea Umbilicals
Specification for Subsea Umbilicals Upstream Segment ANSI/API SPECIFICATION 17E FOURTH EDITION, OCTOBER 2010 EFFECTIVE DATE: APRIL 1, 2011 ISO 13628-5:2009 (Identical), Petroleum and natural gas industries
Upstream / Upstream Safety Sessions
Upstream / Upstream Safety Sessions U01 API Spec Q2 Our Journey to theworld s First Oil and Gas Quality Management System Standard for Service Supply Organizations Euan Ramsay, Regional Business Development
API 8 Round Connections
API 8 Round Connections Scope These guidelines apply specifically to the use of API 8RD (STC, LTC, EUE, NUE) connections. This document is based on API RP 5C1 which is the main document applicable for
American Petroleum Institute Task Group Line Pipe
American Petroleum Institute Task Group Line Pipe Work Item 4185 Evaluate the Differences in Acceptance Criteria for Linear Indications in SAW Pipe Work Item Charge To consider if changes to the API Spec
SC20 MEETING MINUTES January 29, E&P Winter Standards Meeting InterContinental New Orleans New Orleans, Louisiana
Introduction of Attendees SC20 MEETING MINUTES January 29, 2015 2015 E&P Winter Standards Meeting InterContinental New Orleans New Orleans, Louisiana API Subcommittee on Supply Chain Management (SC20)
ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
INTERNATIONAL STANDARD ISO 13628-5 Second edition 2009-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals Industries du pétrole et du
Visual Testing of Pipe Threads
From NDT Technician, Vol. 10, No. 1, pp: 1 5. Copyright 2011 The American Society for Nondestructive Testing, Inc. The American Society for Nondestructive Testing www.asnt.org FOCUS AAs an oil well is
ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
INTERNATIONAL STANDARD ISO 16812 Second edition 2007-02-15 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers Industries du pétrole, de la pétrochimie et du gaz naturel
API COPM and Petroleum Measurement Standards Overview. Paula Watkins API Manager, Measurement Standards
API COPM and Petroleum Measurement Standards Overview Paula Watkins API Manager, Measurement Standards API Standards Program The API Standardization Department formed in 1923 The first API standard was
Table Of Contents Casing Head 02 Christmas Tree & Tubing Head Tubing Spool 04 Contact Us
Table Of Contents Casing Head 02 Christmas Tree & Tubing Head 03 Tubing Spool 04 Contact Us 05 1 www.sapwellsglobal.com Casing Head Specialized large-diameter pipe lowered into an open hole and cemented
NDT KONFERANSEN ZENOVIEA VOROSCIUC
NDT KONFERANSEN 2011 ZENOVIEA VOROSCIUC Short about FMC Expectations Requirements New Challenges. New Solutions. 2 FMC Technologies Subsea Eastern ~ 150% growth from 2004-2010 MUSD Revenue Employees ER
GRAPHICAL INTERFACE FOR EXPERIMENTAL ANALYSIS OF NONDESTRUCTIVE TESTING OF DRILL PIPES
GRAPHICAL INTERFACE FOR EXPERIMENTAL ANALYSIS OF NONDESTRUCTIVE TESTING OF DRILL PIPES Stan Ioana-Gabriela, Assistant lecturer, U.P.G. Ploiesti Niculae Georgrta-Claudia, Lecturer Dr., U.P.G. Ploiesti ABSTRACT:In
Role of Industry Standards in improving Offshore Safety
Role of Industry Standards in improving Offshore Safety Standards Background Role of Standards Standards and Regulations David Miller, PE, F. ASCE, Director, Standards 1 API Standards Background API established
Oil & Gas Products and Services
2015 Value Your Trust Oil & Gas Products and Services Company Profile AMAFHH Petro Services - APS www.amafhh-ps.com AMAFHH Petro Services Oil & Gas Industrial Products & Services (Upstream & Downstream)
Quality Management system to Enhance Offshore & Subsea ESP Run life and Reliability Reda Elmahbes Baker Hughes / Mohamed Elmhabbes Saipem Libya
Quality Management system to Enhance Offshore & Subsea ESP Run life and Reliability Reda Elmahbes Baker Hughes / Mohamed Elmhabbes Saipem Libya ABSTRACT Offshore and subsea wells present multiple challenges
PS901500E IDENTIFICATION, MARKING, HANDLING, PROCESSING AND INSPECTION OF CRITICAL PARTS
SECURITY CLASS: UNCLASSIFIED COML. CLASS: UNCLASSIFIED DOCUMENT IDENTIFIER SUBJECT: IDENTIFICATION, MARKING, HANDLING, PROCESSING AND INSPECTION OF CRITICAL PARTS MATERIAL ENGINEERING & TECHNOLOGY DEVELOPMENT
FREQUENTLY ASKED QUESTIONS to the SOME:
WELCOME to the API Subcommittee on Mechanical Equipment (SOME). As chairman of the SOME, I would like to assist you in discovering how you can be a part of an elite group that develops the most comprehensive
NOIA ANNUAL MEETING CONCERNS/INITIATIVES. BSEE Update. Joe Levine BSEE Washington DC April 11, 2014
NOIA ANNUAL MEETING Technology BSEE OCS Policy TECHNOLOGY Committee CONCERNS/INITIATIVES BSEE Update Joe Levine BSEE Washington DC April 11, 2014 Presentation Overview BSEE Research Program Research Drivers
OBSERVATORY SERVICING AND MAINTENANCE
OBSERVATORY SERVICING AND MAINTENANCE How to deploy and maintain a network of observatories around Europe? We don t built what we cannot maintain! Jean-François DROGOU IFREMER Steve ETCHEMENDY M.B.A.R.I
STEAM QUALITY TEST ELBOWS
STEAM QUALITY TEST ELBOWS V W Elbow Size V W 0.75-1.5 40mm 100mm 2 or larger 50mm 100mm Test Elbow Dimensions Nominal size Pipe outside diameter (inches/mm) Pipe wall thickness X Y A - Both ends B - All
2017 Award Nomination Title of Innovation: Wells Materials Design & Performance enhancement
2017 Award Nomination Title of Innovation: Wells Materials Design & Performance enhancement Nominee(s) Pedro Rincon Flores Petroleum Development Oman Nasser Behlani - Petroleum Development Oman Dr Janardhan
ESP Advisors with a clear focus on improving run life
ESP Advisors with a clear focus on improving run life Name: CHEONG GIN LIN Abilities: QCP Engineer for DHE, Cable and Surface Equipment SUMMARY Ten (10) years of experience as a Third Party Inspector and
MIL- B Rev NAVSEA 0900-LP
I: REQUIREMENTS 1. Identify the standard the supplier uses for performing brazing. MIL- B-007883B OTHER (IF Other, Specify :) MIL- B-007883 Rev NAVSEA 0900-LP-001-7000 II: ATTRIBUTES: YES NO 2a. Does a
PIONEER TRADING CO., LTD.
PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,
Overview. Corrosion detection improvement of oil and gas pipelines with industrial radiography method by using image processing.
detection improvement of oil and gas pipelines with industrial radiography method by using image processing Alireza Karimian (Engineering faculty of Isfahan university, Isfahan,, Iran ) Sepideh Yazdani
(AMMA) American Maritime Modernization Association
(AMMA) American Maritime Modernization Association AUDIT GUIDE FOR THE EVALUATION OF AMMA MEMBER WELDING, BRAZING, AND NON-DESTRUCTIVE TESTING (NDT) PROGRAMS Revised By: Joe Frith, AMMA Welding/Brazing/NDT
MIL- B B. MIL- B Rev NAVSEA 0900-LP II: ATTRIBUTES: YES NO N/A
XXVIII BRAZE/BRAZING PROCESS I: REQUIREMENTS 1. Identify the standard the supplier uses for performing brazing. MIL- B-007883B MIL- B-007883 Rev OTHER (IF Other, Specify :) NAVSEA 0900-LP-001-7000 II:
The Essentials of Pipeline Integrity Management
TRAINING METHODOLOGY This interactive training workshop includes the following training methodologies : Lectures Video Discussion of case histories and hands on calculations WHO SHOULD ATTEND The course
Recommended Practice for Flexible Pipe
Recommended Practice for Flexible Pipe ANSI/API RECOMMENDED PRACTICE 17B FOURTH EDITION, JULY 2008 Document includes Technical Corrigendum 1, dated June 2008 ISO 13628-11:2007 (Identical), Petroleum and
Integrity Management of Offshore Assets
OIL & GAS Integrity Management of Offshore Assets Opening session Leif Collberg 05 May 2017 1 DNV GL 2015 05 May 2017 SAFER, SMARTER, GREENER How regulations can solve the challenge of being performance
ISO INTERNATIONAL STANDARD. Non-destructive testing Ultrasonic thickness measurement
INTERNATIONAL STANDARD ISO 16809 First edition 2012-11-15 Non-destructive testing Ultrasonic thickness measurement Essais non destructifs Mesurage de l'épaisseur par ultrasons Reference number ISO 2012
RELIABILITY OF GUIDED WAVE ULTRASONIC TESTING. Dr. Mark EVANS and Dr. Thomas VOGT Guided Ultrasonics Ltd. Nottingham, UK
RELIABILITY OF GUIDED WAVE ULTRASONIC TESTING Dr. Mark EVANS and Dr. Thomas VOGT Guided Ultrasonics Ltd. Nottingham, UK The Guided wave testing method (GW) is increasingly being used worldwide to test
Inspection and Test Plan for Battery Charger
Inspection and Test Plan for Battery Charger No. Inspection and Test Plan Reference Document Acceptance Criteria Verifying Document Activity By Remark Manuf. TPI Client 1 Pre Inspection Meeting Spec. Spec.
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
General Presentation. EARTO WORKING GROUP Quality and Excellence in RTO Management. Presentation
EARTO WORKING GROUP Quality and Excellence in RTO Management Presentation Who is AIMEN? The Technology Centre AIMEN was established in Vigo (Spain) in 1967, promoted by a group of companies to provide
4 Briefing. Responsible investor
Issue Responsible investor 4 Briefing Wednesday 8 th February 2012 In 2010, we accepted all 26 recommendations made by the Bly Report our internal investigation into the Deepwater Horizon incident. BP
ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film
INTERNATIONAL STANDARD ISO 17636-1 First edition 2013-01-15 Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film Contrôle non destructif des assemblages soudés
GOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
WHO WE ARE. ITS holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA.
WHO WE ARE and Non-destructive Examination Company operating within Western Canada. ITS holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA. We service Western Canada from
OIL INDIA LIMITED DULIAJAN
ADVERTISEMENT EXPRESSION OF INTEREST (EOI) NO. EOI/O/339/2017-2018 Oil India Limited, a Government of India NAVARATNA Category Enterprise, engaged in the business of Exploration, Production & Transportation
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17636-1 First edition 2013-01-15 Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film Contrôle non destructif des assemblages soudés
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13628-8 First edition 2002-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 8: Remotely Operated Vehicle (ROV) interfaces on
IWCF Well Control Level 5. Celle Drilling Conference 2017
IWCF Well Control Level 5 Celle Drilling Conference 2017 Contents IWCF well control level 5 course program Background - who is it for Structure and contents Delivery approach Questions Why? Level 5 background
Tel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
Progressing Cavity Pump Systems for Artificial Lift Surface-drive Systems
Progressing Cavity Pump Systems for Artificial Lift Surface-drive Systems ANSI/API STANDARD 11D3 FIRST EDITION, JUNE 2008 ISO 15136-2:2006 (Identical), Petroleum and natural gas industries Progressing
Pipeline Research Council International, Inc.
Pipeline Research Council International, Inc. The Future of the Pipeline Industry Cliff Johnson President NAPCA Summer Workshop August 16, 2012 2 Outline PRCI Overview State of the Pipeline Industry Changing
ISO 5858 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
INTERNATIONAL STANDARD ISO 5858 Second edition 1999-11-15 Corrected and reprinted 2000-11-15 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
Shell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015
Shell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015 Special Notes API publications necessarily address problems of a general nature. With respect to particular circumstances, local,
QUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
Subsea Integrity and Efficiency Conference
SUBSEA INTEGRITY & EFFICIENCY CONFERENCE 2015 Subsea Integrity and Efficiency Conference - 2015 Flexible Riser Integrity Assessment with Advanced MEC-FIT Technique Andreas Boenisch a.boenisch@innospection.com
National Subsea Research Initiative
National Subsea Research Initiative Coiled line pipe as a potential solution to all pipelines, WI & production risers for small pools, with a focus on installation methods from low cost vessels of convenience.
Industry Response - Post Macondo
Industry Response - Post Macondo Charlie Williams Chief Scientist Well Engineering Shell Energy Resource Company CSIS Energy and National Security Program - future of offshore oil & gas developments in
Hunting Manufactures and distributes products that enable the extraction of oil and gas
Hunting Manufactures and distributes products that enable the extraction of oil and gas Hunting PLC Global Footprint 2 2009 Corporate Highlights Completed three acquisitions 47.3m Sale of Hunting Energy
2015 Exploration & Production Winter Standards Meeting Subcommittee 10. January 27-29, 2015 Intercontinental Hotel New Orleans, LA
2015 Exploration & Production Winter Standards Meeting Subcommittee 10 January 27-29, 2015 Intercontinental Hotel New Orleans, LA Subcommittee on Well Cements (SC10) Agenda Tuesday, January 27 th, 2015
Air Tractor, Inc. Repairs Page 5-i AT-802/802A July 30, 2008
Repairs Page 5-i TABLE OF CONTENTS SECTION 5- REPAIRS No. Page FUSELAGE FRAME REPAIRS... 5-1 FORWARD CLAMP BLOCK BOLT FAILURE..5-1 STANDARD STRUCTURAL REPAIR DRAWINGS...5-1 Repairs Page 5-1 April 12, 2010
Listing Report: AB Reissue Date: 01/21/16 This report is subject to annual review
Reissue Date: 01/21/16 CSI 06 05 23 PRODUCT: Threaded Fasteners DIVISION: Wood, Plastics, and Composites (06) SECTION: Wood, Plastic, and Composite Fastenings (05 23) Report Holder American Bolt and Screw
April 10, 2013 Washington DC. Joe Levine, BSEE John Cushing, BSEE
April 10, 2013 Washington DC Joe Levine, BSEE John Cushing, BSEE Emerging Technologies Branch Best Available and Safest Technology (BAST) Systems Reliability Contracts Oil and gas research of interest
Tailor Made. Create your unique subsea valve
Tailor Made Create your unique subsea valve Our engineers have developed a comprehensive range of subsea valves, operators and hydraulic actuators to deliver complete tailor made packages meeting the highest
MEC-QW-E-2002 Senior QA/QC Welding Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
101835-MEC-QW-E-2002 Senior QA/QC Welding Engineer Holds a B. Sc. in Mechanical Power Engineering and has about 15 years hands-on experience working as QA/QC Engineer & Welding Inspector in several industrial
Pipeline Research Council International, Inc.
Pipeline Research Council International, Inc. Technology Development for Pipeline Integrity Current Features & Coming Attractions API 2012 Pipeline Conference & Cybernetics Symposium Phoenix, AZ April
SPOOLBASE & MULTIJOINT SERVICES
SPOOLBASE & MULTIJOINT SERVICES PIPELINE FABRICATION COMPANY PROFILE Pipeline Technique is a world leading provider of solutions to the oil and gas industry for the most demanding challenges in Welding,
Improved Inspection of CRA-Clad Pipeline Girth Welds with the Use of Accessible Advanced Ultrasonic Phased-Array Technology
Improved Inspection of CRA-Clad Pipeline Girth Welds with the Use of Accessible Advanced Ultrasonic Phased-Array Technology André Lamarre, Olympus Scientific Solutions Americas 11th European Conference
DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing
DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing DE027 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Wellhead and x-mas tree is the main equipment for oil production, water
Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection Ik-Keun PARK 1,a, Yong-Kwon KIM 2,b, Sae-Jun PARK
Fasteners Testing Capabilities. 1
Fasteners Testing Capabilities www.tec-eurolab.com 1 Company Profile We make you feel sure People, skills and technologies to make feel sure that materials and processes can guarantee expected performances.
Pipeline Technology Conference 2010
THRESHOLDS, ACCURACIES AND RESOLUTION: QUANTITATIVE MEASUREMENT AND ITS ADVANTAGES FOR METAL LOSS INSPECTION A. Barbian, M. Beller, A. Hugger, C. Jäger, A. Pfanger NDT Systems & Services Stutensee, Germany
Exploration and Production
If you have any questions or comments regarding API standards, please visit www.api.org/standards. NOTE Free publications with an asterisk are subject to a $10.00 handling charge for each total order,
Requirements for manufacture of anchors
W29 (June 2005) Requirements for manufacture of anchors 1. General requirements 1.1 Scope These Rules apply to the materials, manufacture and testing, and certification of anchors, shanks and anchor shackles
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16530-2 December 2015 ICS 75.180.10 English Version integrity - Part 2: integrity for the operational phase (ISO/TS 16530-2:2014)
Experiences of users in Digital Radiography
Computed Radiography Products & Applications Experiences of users in Digital Radiography Jimmy Opdekamp May Jimmy 2006Opdekamp Global Product Manager CR Int l Workshop Imaging NDT Chennai, 25-28 April
ACCREDITATIONS AND ASSOCIATION MEMBERSHIPS
ABOUT US Well Control School (WCS) is a leading provider of accredited well control training. Since our inception in 1979, we have trained over 85,000 students globally through our training centers and
MSc in Structural Integrity
MSc in Structural Integrity Why study in Structural Integrity at NSIRC? Introduction to NSIRC The National Structural Integrity Research Centre (NSIRC ) will be a state-of-the-art engineering facility
Optional Training Courses - January 26, 2015
Optional Training Courses - January 26, 2015 Risk-Based Inspection (8 Hours) Trainer: Lynne Kaley The details of API s recommended practices (API 580 and API 581) will be presented by recognized industry
NACE International Standards & DoD Corrosion Prevention/Control Effort
NACE International Standards & DoD Corrosion Prevention/Control Effort Cliff Johnson Public Affairs Director NACE International Defense Standardization Program March 9, 2005 NACE International Presentation
REPUBLIC OF KENYA MINISTRY OF MINISTRY OF INDUSTRY, TRADE AND COOPERATIVES KENYA PETROLEUM TECHNICAL ASSISTANCE PROJECT
REPUBLIC OF KENYA MINISTRY OF MINISTRY OF INDUSTRY, TRADE AND COOPERATIVES KENYA PETROLEUM TECHNICAL ASSISTANCE PROJECT TERMS OF REFERENCE FOR CONSULTANCY SERVICES FOR REVIEW AND UPDATE OF OIL AND GAS
DE059: Hydrocarbon Production Operations
DE059: Hydrocarbon Production Operations DE059 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This five-day course will provide the participants with an integrated view of the hydrocarbon
Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
Introduction to Fitness For Service November 10, 2016, University of Alberta, Edmonton.
Advancing Your Career! November 10, 2016 University of Alberta Engineering Teaching and Learning Center, 6th floor room 060 (ETLC 6 060) 116 Street NW., Edmonton, AB T6G 2V4 About This Workshop This workshop
A Full Line of Pipe Products for Any Application
Standard Pipe SureThread and ERW: Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic, full-line
4 /o7. Coiled Tubes and Seamless Line Pipe with One Supplier. 12th Issue. 4 Hot Induction Bends. 2 Broadening the Offer
2 Broadening the Offer 4 Hot Induction Bends 6 LEMS Technology Provides More Accurate Information 4 /o7 12th Issue Coiled Tubes and Seamless Line Pipe with One Supplier Tenaris has produced high technology
NS ACCREDITATION & STANDARDS
ABOUT US.. NS Accreditation & Standards is a new product line of the Fearnley Procter Group. As the name would suggest it manages the development of NS-1 and NS-2 Standards plus the Accreditation Programmes
New portable eddy current flaw detector and application examples
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic New portable eddy current flaw detector and application examples More Info at Open Access Database
JIS G3465 Seamless Steel Tubes for Drilling
JIS G3465 Seamless Steel Tubes for Drilling 1. Scope This Japanese Industrial Standard specifies the seamless steel tubes, hereinafter referred to as the "tubes", used for casing tube, core tube and drill
Fasteners. Massachusetts Institute of Technology Kavli Institute for Astrophysics and Space Research (MKI) Dwg. No Revision D March 24, 2015
Rev. ECO Description Author Approved Date A Initial Release B. Klatt R. Goeke 04/16/91 B General Revision 01/20/06 C General Editorial Update B. Klatt M. Bautz 07/16/14 D Incorporate GSFC 541- PG- 8072.1.2Rev
Tom Marshall, Sonatest Ltd. Date: March 15, Typical Application. Introduction. Using the veo with the Phoenix Bracelet Scanner
Application Note Title: Author: Using the veo with the Phoenix Bracelet Scanner Tom Marshall, Sonatest Ltd. Date: March 15, 2011. Typical Application The Pheonix Bracelet Scanner has been developed for
Engineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
SiRCoS Submarine pipeline repair system. Carlo Maria Spinelli - Bratislava, September 2008
SiRCoS Submarine pipeline repair system Carlo Maria Spinelli - Bratislava, 18-19 September 2008 Outline 1 Introduction to subsea pipelines 2 Deep water projects 3 Pipeline damage & scenarios 4 SiRCoS Repair