SENARAI AKADEMIK DI FAKULTI KEJURUTERAAN PEMBUATAN
|
|
- Harold Thornton
- 5 years ago
- Views:
Transcription
1 Nama : PROFESOR IR. DR. WAN AZHAR BIN WAN YUSOFF No. Tel. : wazhar@ump.edu.my : Green Energy, Electrical Drive, Robotics, Wireless Cognitive System, Robotic and Control System, Industrial Engineering Nama : PROFESOR DR. ZAHARI BIN TAHA No Tel : zaharitaha@ump.edu.my : Sensor and Instrumentation, Robotics and Control System, Cybernetics Intelligence, Digital Image Processing, Vision based Robotics, Sports Performance Monitoring, Ergonomic Nama : PROFESOR DR. SHAMSUDDIN BIN BAHARIN No. Tel. : shamsuddin@ump.edu.my : Production System Optimization, Manufacturing Quality, Industrial Engineering Nama : PONNAMBALAM SIVALINGA GOVINDA RAJAN No. Tel. : sgponnambalam@ump.edu.my : Production System Optimization, Industrial Engineering, Genetic Algorithms and Evaluative Strategies, Evolutionary computation, Cybernetics Intelligence, Robotic and Control System 1 P a g e
2 Nama : PROFESOR MADYA DR. DEWAN MUHAMMAD NURUZZAMAN No. Tel. : dmnuruzzaman@ump.edu.my : Thermoplastic & Thermoset Polymer, Composite Material, Sustainable Material, Surface Engineering, Smart Materials, Powder Metallurgical Nama : PROFESOR MADYA DR.ABDUL AZIZ BIN JAAFAR No. Tel. : ensaaj@ump.edu.my : Sensors and Instrumentation, Robotics and Control Systems, CAD/ CAM / CAE, Product Design Manufacturing, Finite Element Simulation, Composite Material Nama : PROFESOR MADYA DR. AJISMAN No. Tel. : ajisman@ump.edu.my : Electrical Drive, Sensors and Instrumentation, Digital Image Processing, Wireless and Mobile System, Micro-Electronics and Digital System Nama : PROFESOR MADYA DR. ISMED ISKANDAR No. Tel. : ismed@ump.edu.my : Production System Optimization, Production Planning & Control, Manufacturing Simulation, Supply Chain Management, Manufacturing Quality, Industrial Engineering 2 P a g e
3 Nama : PROFESOR MADYA IR DR. AHMAD RAZLAN BIN YUSOFF No. Tel. : razlan@ump.edu.my : Machining Mechanics, Sheet Metal Processes, Non-traditional Cutting Technologies, Nano Cooling System, Surface Tribology & Wear, Tool & Die Technologies Nama : DR. ZAMZURI BIN HAMEDON No. Tel. : zamzuri@ump.edu.my : Machining Mechanics, Sheet Metal Processes, Product Design & Manufacturing, Non-traditional Cutting Technologies, Finite Element Simulation, Ergonomics / Human Factor, Manufacturing Quality, Industrial Engineering Nama : PROFESOR MADYA DR. ZUWAIRIE BIN IBRAHIM No. Tel. : zuwairie@ump.edu.my : Cybernetics Intelligence, Artificial Intelligence, Soft Computing, Process Control, Instrumentation and Optimization Nama : DR. MUHAMMED NAFIS BIN OSMAN ZAHID No. Tel. : nafis@ump.edu.my : CAD/CAM/CAE, Machining Mechanics, Product Design & Manufacturing, Prototyping & Additive Manufacturing, Ergonomics / Human Factor 3 P a g e
4 Nama : DR. NORAINI BINTI MOHD RAZALI No. Tel. : norainimbr@ump.edu.my : Production System Optimization, Production Planning & Control, Supply Chain Management, Manufacturing Quality, Industrial Engineering Nama : DR. NOOR MAZNI BINTI ISMAIL No. Tel. : drmazni@ump.edu.my : Plastic Processing Technologies, Thermoplastic & Thermoset Polymer, Sustainable Materials Nama : DR. MEBRAHITOM ASMELASH GEBREMARIAM No. Tel. : mebrahitoma@ump.edu.my : CAD/CAM/CAE, Machining Mechanics, Finite Element Simulation, Composite Material, Manufacturing Simulation, Industrial Engineering Nama : DR. MUCHAMAD OKTAVIANDRI No. Tel. : oktaviandri@ump.edu.my : Product Design & Manufacturing, Production System Optimization, Production Planning & Control, Ergonomics/Human Factor, Manufacturing Simulation, Industrial Engineering 4 P a g e
5 Nama : DR. IZWAN BIN ISMAIL No. Tel. : izwanismail@ump.edu.my : CAD / CAM / CAE, Tool & Die Technologies, Abrasive Cutting Technologies, Surface Tribology & Wear, Surface Engineering, Nano Material Nama : DR. ARSHED ABDULHAMEED OUDAH No. Tel. : arsheed@ump.edu.my : Electrical Drive, Sensors and Instrumentation, Digital Image Processing, Wireless and Mobile System, Micro-Electronics and Digital System Nama : DR NAFRIZUAN BIN MAT YAHYA No. Tel. : nafrizuanmy@ump.edu.my : Cybernetics Intelligence, Robotic and Control System, Ergonomics / Human Factor 5 P a g e
6 Nama : DR. ING. MOHD AZMIR BIN MOHD AZHARI No. Tel. : azmir@ump.edu.my : Machining Mechanics, Abrasive Cutting Technologies, Non-Traditional Cutting Technologies, Surface Tribology & Wear Nama : DR. AKM ASIF IQBAL No. Tel. : asifiqbal@ump.edu.my : Plastics Processing Technologies, Finite Element Simulation, Thermoplastic & Thermoset Polymer, Finite Element & Failure Analysis, Material Degradation Nama : DR. IR. FAIZ BIN MOHD TURAN No. Tel. : faizmt@ump.edu.my : Product Design & Manufacturing, Sustainable Manufacturing, Production System Optimization, Supply Chain Management, Manufacturing Quality, Industrial Engineering 6 P a g e
7 Nama : DR. MOHAMMED ABDO HASHEM No. Tel. : hashem@ump.edu.my : Biomedical Electronic, Robotics, Sensors and Instrumentation, Digital Image Processing, Robotic and Control System Nama : ZULKIFLI BIN MD. YUSOF No. Tel. : zmdyusof@ump.edu.my : Biomedical Electronic, Sensors and Instrumentation, Cybernetics Intelligence, Micro-Electronics and Digital System, Production System Optimization, Sustainable Material Nama : DR. NANANG FATCHURROHMAN No. Tel. : fatchurrohman@ump.edu.my : Product Design & Manufacturing, Prototyping & Additive Manufacturing, Casting & Semi Solid Technologies, Finite Element Simulation, Manufacturing Quality, Composite Material Nama : DR AHMAD SHAHRIZAN BIN ABDUL GHANI No. Tel. : shahrizan@ump.edu.my : Green Energy, Robotics, Sensors and Instrumentation, Digital Image Processing, Robotic and Control System, Vision based Robotics 7 P a g e
8 Nama : DR. MOHD ZAIDI BIN SIDEK No. Tel. : zaidisidek@ump.edu.my : Metal Forming, Finite Element Simulation, Green Energy, Production System Optimization, Manufacturing Simulation Nama : DR. KUSHENDARSYAH SAPTAJI No. Tel. : kushendarsyah@ump.edu.my : CAD/CAM/CAE, Machining Mechanics, Abrasive Cutting Technologies, Non-traditional Cutting Technologies, Finite Element Simulation, Finite Element & Failure Analysis Nama : DR. NURRINA BINTI ROSLI No. Tel. : nurrinarosli@ump.edu.my : Machining Mechanics, Non-traditional Cutting Technologies, Nano Cooling System, Surface Tribology & Wear, Thermoplastic & Thermoset Polymer, Sustainable Material Nama : DR. MUHAMMAD AIZZAT BIN ZAKARIA No. Tel. : maizzat@ump.edu.my : Electrical Drive, Robotics, Sensors and Instrumentation, Robotic and Control System, Lower Limb Exoskeleton 8 P a g e
9 Nama : DR. MOHD YAZID BIN ABU No Tel. : myazid@ump.edu.my : Cybernetics Intelligence, Robotic and Control System, Ergonomic / Human Factors Nama : DR. ZUBAIR BIN KHALIL No Tel : zubair@ump.edu.my : Sheet Metal Processes, Metal Forming, Tool & Die Technologies, Product Design & Manufacturing Nama : DR MOHD HASNUN ARIF BIN HASSAN No. Tel. : mhasnun@ump.edu.my : Finite Element Simulation, Sports Related Head Injury, Custom-made Sports Equipment, Sport Performance Monitoring Devices Nama : DR. AHMAD FAKHRI BIN AB. NASIR No. Tel. : afakhri@ump.edu.my : Digital Image Processing, Robotic and Control System, Robotics, Vision based Robotics 9 P a g e
10 Nama : DR AHMAD ROSLI BIN ABDUL MANAF No. Tel. : arosli@ump.edu.my : Precision Machining and Micro Forming, Injection/ Press Molding, Computer Numerical Control (CNC) Nama : DR AHMAD REDZA BIN AHMAD MOKHTAR No. Tel. : redza@ump.edu.my : Finite Element Simulation, Surface Tribology & Wear, Thermoplastic & Thermoset Polymer, Composite Material, Surface Engineering, Advance Ceramic Nama : KARTINA BINTI RAHMAT No. Tel. : kartina@ump.edu.my : Production System Optimization, Product Design & Manufacturing, Supply Chain Management, Manufacturing Quality, Industrial Engineering, Sustainable Manufacturing Nama : MOHD ALI HANAFIAH BIN SHAHARUDIN No. Tel. : alihanafiah@ump.edu.my : CAD/CAM/ CAE, Machining Mechanics, Sheet Metal Processes, Product Design & Manufacturing, Plastics Processing Technologies, Casting & Semi Solid Technologies 10 P a g e
11 Nama : DR MOHD NIZAR BIN MHD RAZALI No. Tel. : mnizar@ump.edu.my : Tool & Die Technologies, Abrasive Cutting Technologies, Surface Tribology & Wear, Surface Engineering Nama : DR NURUL HIDAYAH BINTI RAZAK No. Tel. : hidayahrazak@ump.edu.my : Machining Mechanics, Tool & Die Technologies, Abrasive Cutting Technologies, Finite Element Simulation, Surface Tribology & Wear, Smart Material Nama : DR AHMAD NAJMUDDIN BIN IBRAHIM No. Tel. : anajmuddin@ump.edu.my : Electrical Drive, Robotics, Sensors and Instrumentation, Digital Image Processing, Robotic and Control System, Vision based Robotics Nama : DR RADHIYAH BINTI ABD. AZIZ No. Tel. : radhiyah@ump.edu.my : Plastics Processing Technologies, Casting & Semi Solid Technologies, Sustainable Material, Smart Materials, Material Degradation, Nano Material 11 P a g e
12 Nama : DR AHMAD SHAHIR BIN IBRAHIM No. Tel. : shahir@ump.edu.my : CAD/CAM/CAE, Machining Mechanics, Metal Forming, Product Design & Manufacturing, Finite Element Simulation, Surface Tribology & Wear Nama : DR SITI ZUBAIDAH BINTI ISMAIL No. Tel. : zubaidahismail@ump.edu.my : Production Planning & Control, Supply Chain Management, Industrial Engineering, Sustainable Manufacturing Nama : DR NURUL AKMAL BINTI CHE LAH No. Tel. : akmalcl@ump.edu.my : Composite Material, Surface Engineering, Smart Materials, Advance Ceramic, Material Degradation, Nano Cooling System Nama : DR ASRUL BIN ADAM No. Tel. : asrul@ump.edu.my : Green Energy, Robotics, Sensors and Instrumentation, Robotic and Control System, Vision based Robotics 12 P a g e
13 Nama : ZULHELMI BIN ISMAIL No. Tel. : zulhelmii@ump.edu.my : Liquid-Phase Exfoliation of 2D Nanomaterial, Graphene Technology, Extrusion and compounding, Composite Nanomaterial and Polymer Nama : NOR IMRAH YUSOFF No. Tel. : imrah@ump.edu.my : Engineering Material, Image Analysis, Infinate Focus Microscope (IFM) Realibility Analysis & Mechanical Characteriszation Material Nama : MOHD ZAIRULNIZAM BIN MOHD ZAWAWI No. Tel. : zairulnizam@ump.edu.my : Plastic/Sheet Metal Product Design, Programming & Machining, Mold & Die Design, Mold Filling Simulation Software, 3D Model Design & Engineering Drawing Nama : KHAIRUL FIKRI BIN MUHAMMAD No. Tel. : fikri@ump.edu.my : CAD Modelling, Sensor & Instrumentation Statistic Programming Micro-controller 13 P a g e
14 Nama : MUNIRA BINTI MOHD ALI No Tel. : munirama@ump.edu.my : Manufacturing System, CAD / CAM Machining and Product Design Application Nama : MOHAMAD FARID BIN MOHAMAD SHARIF No. Tel. : faridms@ump.edu.my : Industrial Furnace Combustion, Heat Transfer & Hot Stamping Energy & Environment Management Rocket Combustion Nama : WAN HASBULLAH BIN MOHD ISA No. Tel. : wanhasbullah@ump.edu.my : Automation & Control, Micro Electro-Mechanical Systems (MEMS) & Optimization Nama : NURNAJMIYAH BINTI JAAFAR No. Tel. : najmiyah@ump.edu.my : Lean Manufacturing System, Work Measurement, Manufacturing System 14 P a g e
15 Nama : SURAYA BINTI SULAIMAN No. Tel. : surayas@ump.edu.my : Casting, Metal Matrix Composites Nama : FAZILAH BINTI ABDUL AZIZ No. Tel. : fazilahaa@ump.edu.my : Manufacturing Process Nama : ISMAIL BIN MOHD KHAIRUDDIN No. Tel. : ismailkhai@ump.edu.my : Automation & Control, Optimization & Mechatronic Design 15 P a g e
# PHOTO NAME TEL. NO. FIELD OF RESEARCH SPECIALIZATION. Manufacturing System& Optimization.
FACULTY OF MANUFACTURING ENGINEERING # PHOTO NAME TEL. NO. EMAIL FIELD OF RESEARCH SPECIALIZATION 1 01175 PROFESOR DR. SHAMSUDDIN BIN BAHARIN 1. Production System Optimization 2. Manufacturing Quality
More informationPREFACE. Finally, I wish all of you good luck and all the best at this conference. Thank you.
PREFACE WELCOMING SPEECH FROM CHAIRMAN imec 2013 First and foremost, I would like to welcome all distinguished guests, invited speakers and participants to the 1st International Manufacturing Engineering
More informationCOMPUTER SCIENCE AND ENGINEERING
COMPUTER SCIENCE AND ENGINEERING Internet of Thing Cloud Computing Big Data Analytics Network Security Distributed System Image Processing Data Science Business Intelligence Wireless Sensor Network Artificial
More informationANGLE MODULATED SIMULATED KALMAN FILTER ALGORITHM FOR COMBINATORIAL OPTIMIZATION PROBLEMS
ANGLE MODULATED SIMULATED KALMAN FILTER ALGORITHM FOR COMBINATORIAL OPTIMIZATION PROBLEMS Zulkifli Md Yusof 1, Zuwairie Ibrahim 1, Ismail Ibrahim 1, Kamil Zakwan Mohd Azmi 1, Nor Azlina Ab Aziz 2, Nor
More informationFaculty of Information System and Technology Universiti Kebangsaan Malaysia (National University of Malaysia)
Faculty of Information System and Technology Universiti Kebangsaan Malaysia (National University of Malaysia) 2 UKM is located in Bangi, about 20 km from Kuala Lumpur. Established in 1970. One of the four
More informationFour Different Methods to Hybrid Simulated Kalman Filter (SKF) with Gravitational Search Algorithm (GSA)
Four Different Methods to Hybrid Simulated Kalman Filter (SKF) with Gravitational Search Algorithm (GSA) Badaruddin Muhammad, Zuwairie Ibrahim, Kamil Zakwan Mohd Azmi Faculty of Electrical and Electronics
More informationCURICULUM VITAE (8 th September nd January 2019)
CURICULUM VITAE (8 th September 2015 22 nd January 2019) 1. Personal Particulars Name : Dr Mohd Yazid bin Abu IC No. : 870201-23-5359 Date of birth : 1 st February 1987 Age : 32 years old Nationality :
More informationCURRENT: COURSES TAUGHT: TXL466 Yarn Technology, 2003 Current. TXL515 Advanced Yarn Technology - Current. TXL588 Technical Textiles, Current
COURSES TAUGHT: CURRENT: TXL466 Yarn Technology, 2003 Current TXL515 Advanced Yarn Technology - Current TXL588 Technical Textiles, 2012 - Current 1/8 TXL611 Research Project 1, 2001 - Current TXL661 Research
More informationFYP VIVA Schedule_RK53
RK_GROUP (7th May 06 Friday) NUR ATIKA BINTI AMAN Dr. Abdul Rahman bin Kram Dr. Muzammil bin Jusoh Design high speed transmission wireless FSO using visible light communication (VLC) 9:00-9:0 NURUL AIN
More informationThe energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.
Elective Concentrations The program in Mechanical Engineering is designed to appeal to students with a wide variety of interests and professional goals. By an appropriate choice of elective courses, students
More informationContinued to page No. 13. Gazette of India No. 651, dated July, 24, 2017
Annexure - 1 Continued to page No. 13 Gazette of India No. 651, dated July, 24, 2017 of Annexure 2 Details of desired Specializations required in various departments S.No. Name of the Department Desired
More informationM. Phil. / Pre. Ph. D. New Syllabus Paper Faculty of Science
THE FINAL PROGRAMME SHIVAJI UNIVRSITY, KOLHAPUR Circular No. 401 Exam Final Programme of the M.Phil. / Pre.Ph.D. Examination to held in April/May 014. 1. Students should see their Seat No. and Name in
More informationSubject Collection Engineering Catalogue Year 2014 Product ID ISSN Product USD Catalogue Price
Subject Collection Engineering Catalogue Year 2014 Product ID ISSN 00336 0001-4575 00310 0094-5765 05605 1874-1029 05618 0894-9166 05481 1570-8705 02007 1474-0346 02000 0965-9978 09001 1270-9638 10029
More informationClassification of Metal Removal Processes and Machine tools. Introduction to Manufacturing and Machining
Classification of Metal Removal Processes and Machine tools Introduction to Manufacturing and Machining Production Engineering covers two domains: (a) Production or Manufacturing Processes (b) Production
More informationHahn-Schickard Stuttgart
Hahn-Schickard Stuttgart Hahn-Schickard Applied research for industry Budget 2016: 23,1 Mio. (5,1 Mio. industry) Employees 2016: 181 FTE (228 persons) Part of the Innovation Alliance Baden-Württemberg
More informationJAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
30-11-2018 03-12-2018 05-12-2018 08-12-2018 13-12-2018 FRIDAY SATURDAY GROUND WATER DEVELOPMENT AND DISASTER AND MITIGATION ADVANCED STRUCTURAL ESTIMATING AND FINITE ELEMENT CIVIL DESIGN GIS AND REMOTE
More informationFOREWORD BY THE DEPUTY MINISTER OF SCIENCE, TECHNOLOGY AND INNOVATION
Preface The invention of the microscope has carved up a whole new dimension in science. By using microscopes, scientists are able to discover the existence of unique of materials. Since their original
More informationAn Experimental Study Of Combinational Logic Circuit Minimization Using Firefly Algorithm
Colloquium on Robotics, Unmanned Systems And Cybernetics 2014 (CRUSC 2014) Nov. 20, 2014 at Universiti Malaysia Pahang, Pekan, Pahang, Malaysia An Experimental Study Of Combinational Logic Circuit Minimization
More informationExperiment Tests on Single Phase Inverter Using Raspberry Pi
International Journal of Integrated Engineering, Vol. 9 No. 3 (2017) p. 29-34 Experiment Tests on Single Phase Inverter Using Raspberry Pi Shamsul Aizam Zulkifli 1 *, Suriana Salimim 1, Siti Aishah Abd
More informationBIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN
OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED
More informationComputer Sciences & Engineering Titles
Bapatla Engineering College :: Library Science Direct e-journals 2016 subscribed by the College Library. Computer Sciences & Engineering - 275 Titles S No ISSN Journal Title Imprint Specialization Subject
More informationSOFTWARE ENGINEERNG RESEARCH GROUP (SERG) ANNUAL REPORT Annual Report S E R G A n n u a l R e p o r t
Annual Report 1 S E R G A n n u a l R e p o r t 2 0 1 6 Software Engineering Research Group Activity Highlights -2017 Event/Activities No. Date Event Description Contact Person 1 5 th Smart City Workshop
More informationTECHNICAL SESSION ICASSDA 2018 International Conference On Computational Approach In Smart Systems Design And Applications
15 August 2018 (Wednesday) ROOM 4 SESSION 1 (11:00 AM 1.00 PM) Chaired by Dr. Saidatul Ardeenawatie binti Awang / Dr. Zunaidi Ibrahim 8-1-0004 Modeling of Time Domain Analysis for Single and Double Open-Circuit
More informationBuilt-Rite Tool & Die
Studio System case study 01 Built-Rite Tool & Die Injection molding firm investigates quick-turn mold application, identifies 90% cost savings. 02 Built-Rite cavity insert installed in the mold plate.
More informationMONDAY. Water Resources Engineering-II. Estimating & Costing CE,CEE. Power System Operation and Control. Digital Signal Processing
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD Elective-II Finite Element Methods Elective-III Advanced Structural CIVIL (01-C E) ELECTRICAL AND ELECTRONICS (02-E E E) MECHANICAL (03-M E) Remote Sensing
More informationMFGE Manufacturing Engineering
MFGE Manufacturing Engineering 1 MFGE Manufacturing Engineering MFGE 2142 Fundamentals of Engineering Mechanics 4 Credit Hours. 0,3 Lecture Hours. 0,2 Lab Hours. This course provides an introductory survey
More informationList of Electives. M.TECH.& M.E.II Sem.
List of Electives. M.TECH.& M.E.II Sem. Sr. No. 1. Name of Branch Structure 1.Advanced Steen Design 2.Design of Earthquake Resistant Structures 3.Design Environmental Structures I V 2. Computer Aided Design
More informationStructural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design
Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer
More informationApplication of CAD/CAE Tools in the Design and Analysis of Plastic Injection Mould
40, Issue 1 (2018) 1-8 Journal of Advanced Research Design Journal homepage: www.akademiabaru.com/ard.html ISSN: 2289-7984 Application of CAD/CAE Tools in the Design and Analysis of Plastic Injection Mould
More informationNATURE S YIELD AND WONDERS OF ART
NATURE S YIELD AND WONDERS OF ART b i r d 1 NY AWA. ...2015 nature s yield and wonders of art NATURE S YIELD AND WONDERS OF ART b i r d 3 Editors-in-Chief Faridah Qamaruz Zaman Nasir Baharuddin Shureen
More informationEnergy & Space. International Presentations
Energy & Space International Presentations 2012-2013 Advanced Electronics 3D Printed Circuit Boards 3D Printed Circuit Boards for Solder-Free Printable Electronics 4x4 Vehicles Arduino WiFi Android Controllers
More informationMALAYSIA. Hang Tuah Jaya, Melaka, MALAYSIA. Hang Tuah Jaya, Melaka, MALAYSIA. Tunggal, Hang Tuah Jaya, Melaka, MALAYSIA
Advanced Materials Research Vol. 903 (2014) pp 321-326 Online: 2014-02-27 (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/amr.903.321 Modeling and Simulation of Swarm Intelligence
More informationcomputing SOC Majoring Talk Workshop 13 Dec DKG 4/1 Organized by: Itech Club the revolution in
SOC Majoring Talk Workshop 13 Dec. 2016 DKG 4/1 Organized by: Itech Club the revolution in computing Ext: 5150 Email: hussain@uum.edu.my Website: wanhussain.com What? Who? "the science and engineering
More informationCOURSE OUTLINE. Page : 1 of 6. Revision Date of issue Last Amendment Edition. 1 Hour lecture 6 Hour studio. Lecturers Room No. Phone No.
Page 1 of 6 18 th Febuary 2009 18 th Febuary 2009 PRE-REQUISITE EQUIVALENCE - LECTURE HOURS 1 Hour lecture 6 Hour studio Lecturers E-Mail Room No. Phone No. Badri Abd Ghani agbadri@fkm.utm.my C23-231 Razali
More informationWEDNESDAY. Advanced Foundation Engineering. Water Resources. Finite Element Methods (Comm. To CE, CEE) (Comm. To CE, CEE) Engineering- II
IV YEAR B.TECH - I SEMESTER R13 REGULATION- SUPPLEMENTARY EXAMINATIONS NOVEMBER/DECEMBER-2018 CIVIL (01-C E) ELECTRICAL AND ELECTRONICS (02-E E E) Remote Sensing & GIS (Comm. To CE, VLSI (Comm to EEE,
More informationHydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete
Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed
More informationUNIVERSITI TEKNOLOGI MARA THE CHARACTERISTIC OF SAYONG PAPERCLAY SLIP FOR ARTWORK
UNIVERSITI TEKNOLOGI MARA THE CHARACTERISTIC OF SAYONG PAPERCLAY SLIP FOR ARTWORK MOHD SHAHROL HANAFI B. MOHD RAFFIE Thesis submitted in fulfillment of the requirements for the degree of Master of Art
More informationKPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898.
National Technical University of Ukraine Kyiv Polytechnic Institute KPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898. OVERVIEW 39 bachelor s, 92 master s,
More informationAcademic Qualification
Dr. Mohd Fadzil Faisae Ab. Rashid Senior Lecturer Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26300 Kuantan, Pahang, MALAYSIA. Tel: +609-424 6321, Fax: 609-424 6222 Email: ffaisae@ump.edu.my
More informationUNIVERSITI MALAYSIA PERLIS
UNIVERSITI MALAYSIA PERLIS DIGITAL SYSTEM I (DKT122) LAB 2: LOGIC GATE QUESTION & ANSWER SHEET REPORT MOHAMAD RIZAL BIN ABDUL REJAB SITI ZARINA BINTI MD NAZIRI & SPECIAL THANKS TO : ZULKIFLI HUSIN MOHAMMAD
More informationAbout SIMTech Pre-requisites Benefits
About SIMTech The Singapore Institute of Manufacturing Technology (SIMTech) is a research institute of the Science and Engineering Research Council (SERC) of the Agency for Science, Technology and Research
More information5/28/2015. Sharif University of Technology. Session # 20. Instructor. Class time. Course evaluation. Department of Industrial Engineering
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 20 Instructor Omid Fatahi Valilai, Ph.D. Industrial Engineering Department, Sharif University
More informationEXMAINATION TIMETABLE SECOND HALF B.E. (Sem VIII) (REV )(CBSGS) (All Branches) Examinations Time
Civil T4328 EXMAINATION TIMETABLE SECOND HALF -2017 B.E. (Sem VIII) (REV. -2012)(CBSGS) (All Branches) Examinations Time 11:00 a.m. To 02:00 p.m DAY THURSDAY WEDNESDAY THURSDAY WEDNESDAY TUESDAY TUESDAY
More informationICIET TH AUGUST 2018, WEDNESDAY Registration
ICIET 2018 THE 4 TH INTERNATIONAL CONFERENCE ON INNOVATION ENGINEERING TECHNOLOGY 2018 15 TH AUGUST 2018, WEDNESDAY 0700-0730 Registration 0800-0810 0810-0830 0830-0930 Welcoming Speech Prof. Dato' Wira
More informationOpening Ceremony. Date: 13th December 2010 Venue: Manhattan Ballroom 1, Berjaya Times Square Hotel Convention Centre, Kuala Lumpur, Malaysia
Opening Ceremony Date: 13th December 2010 Venue: Manhattan Ballroom 1, Berjaya Times Square Hotel Convention Centre, Kuala Lumpur, Malaysia 14.45 : Arrival of guests/vip 14.50 : Arrival of Yang Berhormat
More informationVisvesvaraya Technological University, Belagavi
Time Table for M.TECH. Examinations, June / July 2017 M. TECH. 2010 Scheme 2011 Scheme 2012 Scheme 2014 Scheme 2016 Scheme [CBCS] Semester I II III I II III I II III I II IV I II Time Date, Day 14/06/2017,
More informationCOURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4
COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4 TIME SCHEDULE MODULE TOPICS PERIODS 1 Capstan and turret Lathe 21 Automatic
More informationInjection Moulding Of Plastics
Injection Moulding Of Plastics 1 / 6 2 / 6 3 / 6 Injection Moulding Of Plastics Injection moulding. Injection moulding ( British English) or injection molding ( American English) is a manufacturing process
More informationTEACHING RESPONSIBILITIES COURSES TAUGHT: CURRENT: Yarn Structure and Properties. Advanced Yarn Technology. Technical Textiles 1 / 10
COURSES TAUGHT: CURRENT: Yarn Structure and Properties Advanced Yarn Technology Technical Textiles 1 / 10 Textile Coloration Research Project 1 Research Project II Main Supervisor, BSc. in Textile Technology
More informationPh.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.
QS Ranking NAAC Accredited A Emerging Researchers with creative dynamism for promising innovations are invited to join Hindustan, a blossoming Deemed University with a rich heritage and commitment for
More informationPolyjet technology applications for rapid tooling
DOI: 10.1051/ matecconf/20171120301 1 Polyjet technology applications for rapid tooling Razvan Udroiu *, and Ion Cristian Braga Transilvania University of Brasov, Department of Manufacturing Engineering,
More informationOSMANIA UNIVERSITY No. 33/BE/Exams/TT/ REVISED TIME-TABLE
OSMANIA UNIVERSITY Page No: 6/11 B.E. I/IV (Main&Backlog) EXAMINATIONS: APR/MAY, 2014 Time: 10.00 a.m. to 1.00 p.m. Date Subject 09-06-2014 English 11-06-2014 Mathematics I 13-06-2014 Mathematics II 18-06-2014
More informationIndustry 4.0 Facing the challenge in CONACYT Public Research Centers
International Nanoforum Industry 4.0 Facing the challenge in CONACYT Public Research Centers Vicente Bringas Rico Strategic Plan of CONACYT for Public Research Centers Thematic Alignment Advanced Manufacturing
More informationAPPLICATION GUIDELINE
APPLICATION GUIDELINE Required documents Curriculum in German or English (German standards, which includes a picture) Cover letter in German or English Transcript of records (the transcripts generated
More informationDate Sheet Code: 1718EVEMST Sl No. Date / Day Time Course No Course Name
1 2 3 4 UCS304 UPH001 UPH004 PCA410 PMC402 PMP401 PMP403 UCE804 UCH407 UCS801 UEC301 UES012 UME804 UPE602 DPM003 DSS005 PBT302 PBY209 PCD312 PCE204 PCY216 PEC339 PEE212 PEI312 PIS205 PMC211 PME206 PMP205
More informationOSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE
No.15 /BE/Exams/TT2012 05-04-2013 TIME-TABLE B.E. I/IV (REGULAR) (Main) EXAMINATIONS: MAY/JUNE, 2013 Time: 10.00 a.m. to 1.00 p.m. Subject 04-06-2013 11-0-2013 15-06-2013 20-06-2013 24-06-2013 26-06-2013
More informationYear 11 GCSE Revision - Resistant Materials Topics for revision Re-visit work Suggested activities
Week beginning 6 th Year 11 GCSE Revision - Resistant Materials Topics for revision Re-visit work Suggested activities Materials Woods-hard, soft, manufactured Metals-ferrous, non-ferrous, alloys Recognise
More informationAirframes Instructor Training Manual. Chapter 3 MANUFACTURING TECHNOLOGY
Learning Objectives Airframes Instructor Training Manual Chapter 3 MANUFACTURING TECHNOLOGY 1. The purpose of this chapter is to discuss in more detail, the tools and processes technology that is utilised
More informationManufacturing Systems Engineering Key Expertise Theme. astutewales.com
Manufacturing Systems Engineering Key Expertise Theme astutewales.com Exploit Resources & Connectivity in the Manufacturing Process Improve quality, productivity and sustainability. The Whole Life Cycle
More informationInvestigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material
Journal of Mechanical Engineering Vol. SI 3 (1), 119-134, 2017 Investigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material Azlan Ramli
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationIntroduction What is Design for Manufacture and Assembly? How Does DFMA Work? Reasons for Not Implementing DFMA What Are the Advantages of Applying
What is Design for Manufacture and Assembly? How Does DFMA Work? Reasons for Not Implementing DFMA What Are the Advantages of Applying DFMA During Product Design? Typical DFMA Case Studies Overall Impact
More informationStudying at preparing courses Studying at PC (Russian language 10 months) Study at PC (Russian language, entrance after 1-st of
Cost for foreign students at the Faculty of International Education NTU "KhPI" in 2016/2017 academic year to students enrolled on an individual contract Type of study Cost per 1 year, in $ Studying at
More informationDepartment of Biotechnology Engineering. Department of Electrical and Computer Engineering. Department of Manufacturing and Materials Engineering
KULLIYYAH OF ENGINEERING CONTACT DETAILS Deputy Dean (Postgraduate & Research) Kulliyyah of Engineering, IIUM P.O. Box: 10, 50728 Kuala Lumpur, MALAYSIA T : +60-6196 4494/4511/ 4595 F : +60 6196 4568 W:
More informationProcessing of Non- Metals Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Processing of Non- Metals Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 4 Plastics: properties and processing Lecture - 7 Rotational
More informationDEVELOPMENT OF DIE FOR THE PRODUCTION OF PLASTIC CONTAINER
DEVELOPMENT OF DIE FOR THE PRODUCTION OF PLASTIC CONTAINER Abhishek Sawalkar 1, Ashish Yelekar 2, Yogesh Yadav 3, Aakash Bisen 4 JD College of Engineering And Management, Nagpur, India. Department of Mechanical
More information28/05/2016 Saturday MH7103: Traditional and Contemporary Landscapes
Page 1 of 28 M.Arch. MH7101: Contemporary Processes in Architectural Design I MH7102: Urban Conservation and Practice MH7103: Traditional and Contemporary Landscapes MH7112: Urban Design Studio MH7111:
More informationMembership Application
Membership Application Name of the Company : Key Person Name & Designation : Address : Tel : Fax : Email: Website: Name of the Nominee & Designation : Constitution : Public Ltd. Private Ltd. Proprietary
More informationEVERYTHING TO KNOW ABOUT OVERMOLDED CABLE ASSEMBLIES
EVERYTHING TO KNOW ABOUT OVERMOLDED CABLE ASSEMBLIES By Brian Morissette, Cable Assembly Product Manager Epec Engineered Technologies Overmolding has dramatically changed the appearance and functionality
More informationCurriculum Vitae PERSONAL PARTICULARS
Curriculum Vitae PERSONAL PARTICULARS Name Assoc. Prof. Ir. Dr. Ahmad Rasdan Hj. Ismail NRIC No. 791017-03-5327 Age 37 years old D.O.B/P.O.B 17 th October 1979 / Kota Bharu, Kelantan Sex Male Marital Status
More informationFACULTY OF ENGINEERING
Code No. 2295 / A B.E. 4/4 (EE / Inst. / M/P) II Semester (Main) Examination, April / May 2013 Subject: Intellectual Property Rights (Elective II) Time: 3 Hours Max.Marks: 75 Note: Answer all questions
More informationUNIKL MITEC PUBLICATIONS 2015
UNIKL MITEC PUBLICATIONS 2015 Journals 1. Queuing Theory Application: Capacity Analysis for Public Toilet at Teluk Kemang towards Customer Satisfaction Mohamad Ikbar, A.W. (2015). Queuing Theory Application:
More informationMobile Robot Navigation by Using Fuzzy Information of Moving Two-Wheeled Motion Features
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:13 No:04 34 Mobile Robot Navigation by Using Fuzzy Information of Moving Two-Wheeled Motion Features Khairunizam WAN Rudzuan
More informationTHE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014
5/12/2014 1 1 1 CV0413 Quantity Surveying & Estimation Computer Concept & C Programming CV0418/CV0501 Mechanics of Deformable Bodies CV0419/CV0201 Building Materials & Construction CV0420/CV0402 Mechanics
More informationTENTATIVE PROGRAMME ICSSA 2018 HILTON KUCHING, SARAWAK
TENTATIVE PROGRAMME ICSSA 2018 HILTON KUCHING, SARAWAK DAY 1 (24 th July 2018, Tuesday) TIME DESCRIPTIONS 07:30 08:30 Registration 08:30 09:00 Welcoming and Opening Address Norliza Mohd Noor (Conferences
More informationHANDBOOK OF PRECISION ENGINEERING
HANDBOOK OF PRECISION ENGINEERING HANDBOOK OF PRECISION ENGINEERING Volume 1 Fundamentals Volume 2 Materials Volume 3 Fabrication of Non-metals Volume 4 Physical and Chemical Fabrication Techniques Volume
More informationProgramme Book ICMAAE'13. IIUM Engineering Congress 2013 (IEC'13)
ICMAAE'13 69 MESSAGE FROM THE CHAIRMAN OF ICMAAE'13 ASSOC. PROF. DR. MEFTAH HRAIRI Chairman, International Conference on Mechanical, Automotive and Aerospace Engineering 2013 Assalamualaikum wa rahmatullahi
More informationElectrical and Automation Engineering, Fall 2018 Spring 2019, modules and courses inside modules.
Electrical and Automation Engineering, Fall 2018 Spring 2019, modules and courses inside modules. Period 1: 27.8.2018 26.10.2018 MODULE INTRODUCTION TO AUTOMATION ENGINEERING This module introduces the
More information[PAPER ID ICITER-C110]
AUTOMATION OF MANUAL PLASTIC INJECTION MOULDING MACHINE [PAPER ID ICITER-C110] RAMANAGOUDA BIRADAR Email: ramanagouda.cb@gmail.com DIPAK SHEWALE Email: dishewale@gmail.com ANJALEE BATTUL Email: Anjubattul27@gmail.com
More informationEMC Requirement for LED Lighting and Accessories & EMC Facilities in SIRIM
EMC Requirement for LED Lighting and Accessories & EMC Facilities in SIRIM By: Azizul Azman Jaafar Sr. Testing Executive RF&EMCT Section Testing Services Department RFEMCT SECTION ORGANIZATION CHART HEAD
More informationEND EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC 2016 Examination Timings: A.M. To P.M.
JYOTHISHMATHI INSTITUTE OF TECHNOLOGY & SCIENCE KARIMNAGAR 505 481. DATE & DAY 21-11-2016 23-11-2016 25-11-2016 29-11-2016 01-12-2016 03-12-2016 (Saturday) END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC
More informationC O U R S E C ATA L O U G E 2017/2018
28 TURRET PUNCH 18-20 JULY 2016 Pengenalan kepada kursus asas lukisan menggunakan perisian cnckad 11, dan operasi asas mesin turret punch. KKTM KUANTAN CENTEROFEXCELLENT ADVANCE MANUFACTURING Mempelajari
More informationCURRICULUM VITAE T: F:
CURRICULUM VITAE Ir. Razali Samin Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor T: 03-8946 6340 F: 03-8656 7122
More informationAvailable online at ScienceDirect. Procedia Computer Science 76 (2015 )
Available online at www.sciencedirect.com ScienceDirect Procedia Computer Science 76 (2015 ) 474 479 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS 2015) Sensor Based Mobile
More informationSeminar: Material Bio-Intelligibility Fall Instructor: Prof. Paz Gutierrez
Matter has become an ever more essential media for enabling technological advances across multiple disciplines. This phenomenon derived largely from the advent of Quantum Mechanics revolutionized our perception
More informationEngineering Department. Ocean Panel
Mechanical Engineering g Faculty Automotive, Aeronautical & Ocean Engineering Department Ocean Panel innovative. entrepreneurial. global innovative. entrepreneurial. global Ocean Panel Assoc. Prof. Dr
More informationDEVELOPMENT OF COMPUTER-AIDED MATERIALS AND MANUFACTURING PROCESS SELECTION SOFTWARE USING BOOTHROYD-DEWHURST METHODOLOGY ZAEIME BIN ZAKARIA
DEVELOPMENT OF COMPUTER-AIDED MATERIALS AND MANUFACTURING PROCESS SELECTION SOFTWARE USING BOOTHROYD-DEWHURST METHODOLOGY ZAEIME BIN SULONG @ ZAKARIA A project report submitted in partial fulfilment of
More informationAssessment Blueprint AMBA Master Moldmaker Certification
Assessment Blueprint Test Code: 8281 Version: 01 Specific Competencies and Skills Tested in this Assessment: Advanced Planning and Review Redline a mold design Identify mold manufacturing cost issues Mold
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationWELCOMING REMARKS LUX RESEARCH-NANOMALAYSIA FORUM 2015 RE-ENERGIZING ECONOMIC GROWTH THROUGH ADVANCED MATERIALS INNOVATIONS
WELCOMING REMARKS LUX RESEARCH-NANOMALAYSIA FORUM 2015 RE-ENERGIZING ECONOMIC GROWTH THROUGH ADVANCED MATERIALS INNOVATIONS BY YANG BERUSAHA DR REZAL KHAIRI AHMAD CHIEF EXECUTIVE OFFICER OF NANOMALAYSIA
More informationProcessing of Non-Metals Prof. Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Processing of Non-Metals Prof. Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 4 Plastics: Properties and Processing Lecture - 5
More informationCHAPTER FIVE Polymer Forming
CHAPTER FIVE Polymer Forming Plastic raw materials are available in a variety of forms including Powder, viscous fluids, pellets and granules. Product manufacturers use a wide range of processing machinery
More informationRapid process planning in CNC machining for rapid manufacturing applications
Loughborough University Institutional Repository Rapid process planning in CNC machining for rapid manufacturing applications This item was submitted to Loughborough University's Institutional Repository
More informationROADMAP BACHELOR DEGREE OF ELECTRONIC ENGINEERING WITH HONOURS FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA
Nationhood Safety Health I Culture BEE 1103 I Islamic Asian BEE 1003 Creativity II Signals Analog s Digital s s I BEE 302 V Fields Waves Power s BEE 302 BEB 303 Circuits s I s I II YEAR Final Year I 1
More informationACADEMIC QUALIFICATION
IR DR AHMAD RAZLAN YUSOFF C.Eng, MIMechE, P.Eng Assoc. Prof./Deputy Dean of Academic and Student Affairs Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, MALAYSIA.
More informationModelling of Photovoltaic Module Using Matlab Simulink
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Modelling of Photovoltaic Module Using Matlab Simulink To cite this article: Nurul Afiqah Zainal et al 2016 IOP Conf. Ser.: Mater.
More information& Springer. The Malaysia-Japan Model. on Technology Partnership. International Proceedings of Malaysia-Japan Academic Scholar Conference
Khairuddin Ab. Hamid Osamu Ono Anas Muhamad Bostamam Amy Poh Ai Ling Editors The Malaysia-Japan Model on Technology Partnership International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference
More informationDesign Optimization and Development of Portable Vacuum Clamping (VacCLAMP) Based on Machining Performances
International Journal of Engineering & Technology IJET-IJENS Vol:18 No:01 11 Design Optimization and Development of Portable Vacuum Clamping (VacCLAMP) Based on Machining Performances N. Ab Wahab, Shahazati
More informationA Hands-on Approach in Teaching Machine Design
Paper ID #11528 A Hands-on Approach in Teaching Machine Design Dr. Luis E Monterrubio, Robert Morris University Luis E. Monterrubio, Ph.D. Mechanical Engineering Assistant Professor of Mechanical Engineering
More informationSAVITRIBAI PHULE PUNE UNIVERSITY
S- 165/2014 SAVITRIBAI PHULE PUNE UNIVERSITY EXAMINATION CIRCULAR No. 165 of 2014 Programme of the M.E. 2013 Credit Pattern (Sem. I & II ) (All Branches) Examination, Nov. - 2014. Instructions to the Candidates:
More information