COURSE OUTLINE. Page : 1 of 6. Revision Date of issue Last Amendment Edition. 1 Hour lecture 6 Hour studio. Lecturers Room No. Phone No.

Transcription

1 Page 1 of 6 18 th Febuary th Febuary 2009 PRE-REQUISITE EQUIVALENCE - LECTURE HOURS 1 Hour lecture 6 Hour studio Lecturers Room No. Phone No. Badri Abd Ghani agbadri@fkm.utm.my C Razali Sulaiman razali@fkm.utm.my C25-5 Dr Mohd Affendi Mohd Yusof affendi@fkm.utm.my C23-4 Zulkafli Yussoff zulkafli@fkm.utm.mu C23-4 Dr Mohd Foad Abd Hamid mfah@fkm.utm.my C25-4 Dr Mohd Noor Harun mnoor@fkm.utm.my C Ahmad Humaizi Rozaini humaizi@fkm.utm.my C23-4 Dr Jamaludin Mohd Taib jamalt@fkm.utm.my C Dr Mohamad Kasim Abd Jalil kasim@fkm.utm.my C25-4 SYNOPSIS This subject introduces student to the use of technical drawing in an effective way for communicating and integrating with engineering concepts. Such environment will provide a platform where the engineer can share and exchange information. This subject will also enlighten the student on the significant changes in the engineering and technical graphic due to the use of computer and CAD (Computer Aided Design) software. At the end of the course, student should be able to apply the skill and knowledge of engineering drawing to interpret design, using graphics method such as geometric drawing, orthographic projection, isometric, machine drawing, detailed drawing, and basic CAD software.

2 Page 2 of 6 18 th Febuary th Febuary 2009 PREPARED BY CERTIFIED BY Name Dr Jamaludin Mohd Taib Name Prof Dr Roslan Abd Rahman Signature Signature Date 18 th Febuary 2009 Date COURSE LEARNING OUTCOMES By the end of the course, students should be able to No. Course Learning Outcomes Programme Learning Outcome(s) Addressed Assessment Methods 1. Duplicate drawing using basic drafting skills. PO1 HW Apply Computer Aided Drafting software in construction of drawing template PO1 HW 3. Construct geometrical shapes manually and using Computer Aided Drafting Software PO1, PO2 HW, T 4. Construct the 3D objects to its orthographic projections manually and using Computer Aided Drafting Software HW, T 5. Construct the orthographic projection to isometric projection HW, T, PR 6 Construct the proper sectional technique HW, T, PR

3 Page 3 of 6 18 th Febuary th Febuary Construct symbol and standard to produce engineering drawing HW, T, PR 8 Construct the technical drawing technique in generation of assembly and detail drawing HW, T, PR 9 Construct solid model related commands in Computer Aided Drafting Software in generation of assembly drawing and detail drawing T, PR Note (T Test ; PR Project ; Q Quiz; HW Homework ; Pr Presentation; F Final Exam) STUDENT LEARNING TIME No Teaching and Learning Activities Pembelajaran Bersemuka (PB) ( Manual 12jam dan AutoCAD 8 jam) Pembelajaran Bersemuka (PB) ( Manual 12 jam, AutoCAD 8 jam dan Projek 10 jam ) Aktiviti Pembelajaran Kendiri ( Manual 12 jam, AutoCAD 8 jam dan Projek 23jam ) Aktiviti Pembelajaran Kendiri ( 5 jam penilaian x 2 ) Aktiviti Pembelajaran Kendiri (Projek 12 jam tambahan) Penilaian Formal ( Ujian 1 2 jam dan Ujian 2 3 jam ) Student Learning Time (hours) Total 120 TEACHING METHODOLOGY 1. Lecture will given to expose the student on the principle of engineering drawing Students are required to attend studio to have an hand-on practice on engineering drawing 3. Students are required to produce a complete production on selected product for the project WEEKLY SCHEDULE

4 Page 4 of 6 Week Lecture Topic / Content 18 th Febuary th Febuary hr Introduction to Engineering Drawing and computer aided design (CAD) Drawing tools and CAD Standard practices BS308 and ISO standards Lettering and basic dimensioning Engineering drawing line types Hands on manual drawing and using CAD hr Geometry Dimension and tolerance Basic drawing construction tangencies Drawing basic geometric shape using circle, ellipse, polygon Basic CAD editing technique Setting up engineering drawing and CAD standard drawing title block, dimensioning and layering Produced scale drawing and hard copy (printing) Exercise 5 (CAD) and 3 (manual) 6-7 2hr Orthographic Definition First and third angle projection theory CAD projection technique coordinate point filters, construction line drawing and layering technique Exercise 3 (CAD) and 2 (manual) 8 MID SEMESTER BREAK hr Isometric Definition Isometric drawing concept CAD drawing technique setting up isometric plane and control 3D solid Modelling general concepts and commands (W9) (W10) Test 1 (CAD) hr Section drawing Sectioning concepts Full section, half section, section line etc Drawing layout 13 1 hr Machine drawing Bolt and nut Standard symbols using CAD

5 Page 5 of 6 18 th Febuary th Febuary hr (W14) (W15) Production drawing Prepare Bill of Material (BOM) Assembly drawing Test 2 (Manual) REFERENCES David L. Goetsch, William S. Chalk, John A. Nelson and Raymond L. Rickman (2005), Technical Drawing, Fifth edition, Thomson Delmar Learning James M. Kirkpatrick (2003), Basic Drafting Using Pensil Sketches and AutoCAD, Prentice Hall Khairul Anwar Hanafiah (2006), Lukisan kejuruteraan berbantu computer, Edisi kedua, Penerbit UTM Khairul Anwar Hanafiah (2003), Latihan AutoCAD SMJ1503 versi 2, CD ROM format Mohd Fadzil Daud dan Khairul Anwar Hanafiah (2005), Panduan asas lukisan kejuruteraan, Edisi kedua, Penerbit Mohd Ramzan Manial, Yahya Samian dan Badri Abdul Ghani (1996), Lukisan kejuruteraan asas, Edisi kedua, Penerbit UTM GRADING No. Assessment Number % each % total Dates 1. Test W8 Test W9 3. Project W8 W15 4. Assignment Manual W2 W15 5. Assignment CAD W2 W7 Overall Total 100 ATTENDANCE The student should adhere to the rules of attendance as stated in the University Academic Regulation - 1. Student must attend not less than 80% of lecture hours as required for the subject.

6 Page 6 of 6 18 th Febuary th Febuary 2009 The student will be prohibited from attending any lecture and assessment activities upon failure to comply the above requirement. Zero mark will be given to the subject.