Mr. Naresh C. Deshpande. Assistant Professor. Dept. of Mechanical Engg : (1) PhD (Mechanical Engg.) Pursuing.
|
|
|
- Jewel Simpson
- 6 years ago
- Views:
Transcription
1 Name of Teaching Staff Designation Department Mr. Naresh C. Deshpande Assistant Professor Dept. of Mechanical Engg. Date of Joining the Institution Qualifications with Class / Grade (1) PhD (Mechanical Engg.) Pursuing. (2) M.E. (Mechanical Engg.), Dec. 2013, Ist class with distinction, 70.86%, Mumbai university. (3) B.E. (Production Engg.), May 1994, Ist class with distinction, 77.02%, Dr. Babasaheb Ambedkar Marathwada University Aurangabad. 1st Rank in University. Total Experience in Years Teaching 19 years 1. Assistant Professor in Production Engg. From till date. 2. Lecturer (Sr.Scale) in Prodn. Engg., Dwarkadas J. Sanghvi College of Engg. from till Lecturer in Production Engineering, Dwarkadas J. Sanghvi College of Engg. from to Industry 10 months 1. Engineer (Production), Garware Polyester's Ltd., Aurangabad from to Apprentice, Needle Roller Bearings (N.R.B.) Jalna from September, 1995 to December, Papers Published in Journals National-- 01 (1) Electron-Beam Curing of Polymeric Composites An Enabling Technology for Advanced Manufacturing in IPI journal (The official publication of Indian Plastics Institute), June/July 2013,Vol.18, issue 2.(with Dr. Hari Vasudevan)
2 International (1) Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites in Elsevier Journal Procedia Engineering vol. 97 (2014) pp (doi /j.proeng ) (with Dr. Hari Vasudevan and Ramesh Rajguru) (2) Multiobjective Optimization of Drilling Characteristics for NEMA G -11 GFRP/Epoxy Composite using Desirability Coupled with Taguchi Method in Elsevier Journal Procedia Engineering vol. 97 (2014) pp (doi /j.proeng ) (with Dr. Hari Vasudevan and Ramesh Rajguru) (3) A study on Edge Milling Operation of NEMA G11 GFRP Composites based on Grey-Taguchi method in the international journal Applied Mechanics and Materials - ISSN , (doi / Vols (2014) pp.18-22, (with Dr. Hari Vasudevan and Ramesh Rajguru ) (4) Desirability Fuzzy Multiple criteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites in Elsevier published Journal Procedia Material Science Vol. 5 (2014) pp (with Dr. Hari Vasudevan and Ramesh Rajguru). DOI /j.mspro (5) Experimental Investigation and Optimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites presented in Elsevier published Journal Procedia Material Science Vol. 5 (2014) pp (with Dr. Hari Vasudevan and Ramesh Rajguru). DOI /j.mspro (6) Investigation of the Machinability Characteristics of GFRP/ Epoxy Composites using Taguchi Methodology in the international Journal of Applied Mechanics and Materials (AMM) Vol. 612 (2014) pp , as a special volume titled Advanced Research in Design, Manufacturing and Materials. Published by Trans Tech Publications Ltd Switzerland,(doi / (with Dr. Hari Vasudevan and Ramesh Rajguru ).
3 (7) Investigation of the machinability characteristics of GFRP/vinyl ester composite using design of experiments, in the International Journal of Machining and Machinability of Materials Special issue on Machining of Advanced Materials, Inderscience 2014, Vol.15, No.3/4, pp ISSN (Online) X - ISSN (Print) (with Dr. Hari Vasudevan and Ramesh Rajguru ) DOI /IJMMM (8) Exploring the performance of a Single Cylinder Diesel Engine with alternative fuels such as CME and CME-Diesel Blends in the International Journal of Current Engineering and Technology, InPressco International Press Corporation, Vol. 3, Issue 3, pp.1-4, ISSN (with Dr. Hari Vasudevan, Sandip Mane and Rajguru Ramesh). Papers Published in conferences National-- 02 (1) Analysis of Compliant Cellular Materials for Potential Industrial Applications in the National Conference on Innovation in Futuristic Materials & Manufacturing Techniques [IFMMT-2014], during 26 th and 27 th December 2014, organized by Department of Mechanical Engg., School of Engg. And Tech., Manipal University, Jaipur. (with Umang Dadhich and Ometz Elijah) (2) Delamination in Machining of Composite Materials A Review in the Context of Drilling Operation in the National Conference on Emerging Trends in Engineering, NCETE-13, during 4th & 5th January 2013, organized by M.H.Saboo Siddik College of Engineering, Byculla, Mumbai. (with Dr. Hari Vasudevan and Ramesh Rajguru ) International (1) Grey Fuzzy Multiple Criteria Optimization of Process Parameters for CNC turning of GFRP/Vinyl Ester Composites, presented at 1st International Conference on Materials, Manufacturing and Design Engineering. (ICMMD -2016) held at Dr. Babasaheb Ambedkar Technological University, Lonere, Maharashtra, India, during December 20-21, (with Dr Hari Vasudevan and Ramesh Rajguru)
4 (2) Multiple Criteria Optimization of Process Parameters for Edge Milling of NEMA G11 Composites using Desirablity Function Analysis, presented at 1st International Conference on Materials, Manufacturing and Design Engineering. (ICMMD-2016) held at Dr. Babasaheb Ambedkar Technological Universit, Lonere, Maharashtra, India, during December 20-21, (with Ramesh Rajguru and Dr Hari Vasudevan) (3) Optimization of Cutting Parameters for Surface Roughness in Machining of GFRP Composites, presented at 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) held at College of Engineering Pune, Maharashtra India, during December 16-18, (ISBN ) (with Dr. Hari Vasudevan, Ramesh Rajguru, Kalpesh Tank and Aman Tukrel) (4) Utility Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites, presented at 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2014) held at Indian Institute of Technology Guwahati, Assam, India during December 12-14, (ISBN ) (with Dr. Hari Vasudevan and Ramesh Rajguru) (5) Experimental Investigation and Optimization of Milling Parameters in the Machining of NEMA G -11 GFRP Composite Material using PCD Tool, presented in the International conference on All India Manufacturing Technology, Design and Research (AIMTDR-2014) held at Indian Institute of Technology Guwahati, Assam, India during December 12-14, (ISBN ) (with Dr. Hari Vasudevan and Ramesh Rajguru) (6) Utility Fuzzy Multicriteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites presented in the ICMMM2014 conference held at Indian Institute of Technology Madras, Chennai, during August 8-9, (ISBN ) (with Dr. Hari Vasudevan and Ramesh Rajguru) (7) Grey fuzzy optimization of milling parameters for G-11 GFRP/Epoxy composites with multiple performance characteristics presented in the ICMMM2014 conference
5 held at Indian Institute of Technology Madras, Chennai, during August 8-9, (ISBN ) (with Dr. Hari Vasudevan and Ramesh Rajguru ) (8) Multi Criteria Decision Making using Fuzzy Inference System A Case in Manufacturing presented in the ICCICCT 2014 conference organized by Noorul Islam centre for higher education, Noorul Islam university, Kumaracoil, Tamilnadu, India, from July 10-11, pp (ISBN ) (doi /iccicct ) (IEEE Xplore) (with Dr. Hari Vasudevan and Ramesh Rajguru ) (9) An Experimental Investigation into the Optimization of Cutting Force in CNC Turning of Woven Fabric based GFRP/Epoxy Composites using PCD Cutting Tool presented in the International Conference on Design, Manufacturing and Mechatronics organized by Trinity college of engineering and research Pune, Maharashtra, from 9th 10th Jan (with Dr. Hari Vasudevan and Ramesh Rajguru ) (10) An Experimental Study on the Performance and Emission Characteristics of a Single Cylinder Diesel Engine Using CME-Diesel Blends, in the International Conference on Renewable Energy and Sustainable Development (ICRESD-2014) organized by KJEI s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Dr. Hari Vasudevan, S. Mane and R. Rajguru). (11) Analysis of a Multi-criteria optimization problem using Taguchi and Grey relational analysis A case study in the machining of composite materials in the International Conference on Advances in Mechanical Engineering organized by the department of Mechanical Engineering, College of Engineering Pune, Maharashtra, from 29th-31st May (with Dr. Hari Vasudevan and Ramesh Rajguru) (12) Study of Cutting Force in CNC Turning of Woven Fabric based GFRP/Vinylester Composites using PCD Cutting Tool in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013, ISBN ) organised by the Department of Mechanical Engineering (DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th-30th March (with Dr. Hari Vasudevan and Ramesh Rajguru )
6 (13) Multi-criteria optimization using Taguchi and Grey relational analysis in CNC drilling of GFRP/E composite material in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013, ISBN ) organised by the Department of Mechanical Engineering (DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th-30th March (with Dr. Hari Vasudevan and Ramesh Rajguru) (14) Recent Trends and Developments in the use of Woven Fabric Reinforcements for Composite Materials in the International Conference on Innovations in Automation and Mechatronics Engineering 2013 (ICIAME-2013,ISBN ), organised by G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat, India, February (with Dr. Hari Vasudevan and Ramesh Rajguru) Research Grants Professional Memberships 1. Received University of Mumbai Minor Research Grant (Sr. No. 389) of during , for project titled Multi-Objective Optimization of Roughness Parameters during Turning of GFRP/Epoxy Composite Material. (Along with Dr. Hari Vasudevan as co-investigator) 1. Life member of I.S.T.E. (Indian Society of Technical Education) 2. Life Member of I.S.M.E. (Indian Society of Manufacturing Engineers) Reviewer Guest Lecture / Technical Talk Awards 1. Reviewer for Elsevier published International Journal of Taiwan Institute of Chemical Engineers. 2. Reviewer for Indian Journal of Engineering & Materials Sciences. 1. Delivered an Expert talk on Low Cost Automation at the national seminar on Affordable Technologies for SME sector in INDIA held on 27 th March 2015 at Lala Lajpatrai Institute of Management, Mahalaxmi, Mumbai. 1. Recipient of Best Teacher Award for the academic year from department of production engineering. Award constituted by SVKM management, includes a certificate of honor, and Rs. 5,000/- in cash.
Dr. Hari Vasudevan Principal
Name: Dr. Hari Vasudevan Principal Professor and Head of the Dept. of Production Engg. Ph.D (Indian Institute of Technology Bombay) M.E. Production Engg. (VJTI) Post-Graduate Diploma in Industrial Engg.
MECHEXEL Academic Report of the Department of Mechanical Engineering ( )
MECHEXEL Academic Report of the Department of Mechanical Engineering (2014-2015) Editors: Dr K N Vijay Kumar P Frank Crasta Dharam Ranka 1 INDEX Sr. No. Content Page no. 1 About the Department 4 2 Administration
Dr. Hari Vasudevan Principal, DJSCE
Name: Dr. Hari Vasudevan Principal, DJSCE Professor and Head of the Dept. of Production Engg. Ph.D. (Indian Institute of Technology Bombay) M.E. Production Engg. (VJTI) Post-Graduate Diploma in Industrial
Dr. Hari Vasudevan Principal
Name Dr. Hari Vasudevan Principal Professor and Head of the Dept. of Production Engg. Ph.D (Indian Institute of Technology Bombay) M.E. Production Engg. (VJTI) Post-Graduate Diploma in Industrial Engg.
Dr. Atul D. Dhale. Associate Professor. Dept. of Production Engg.
Name of Teaching Staff Designation Department Date of Joining the Institution Dr. Atul D. Dhale Associate Professor Dept. of Production Engg. 10.04.2017 Qualifications with Class / Grade (1) PhD (Mechanical
DEPART OF COMPUTER SCIENCE AND ENGINEERING
DEPART OF COMPUTER SCIENCE AND ENGINEERING Name & Photo : Dr.B.LATHA Designation: Qualification : Area of Specialisation : Professor M.E., Ph.D Soft Computing, Network Security Experience : Teaching :
CURRICULUM VITAE. 9. Teaching Experience : Period From To Osmania University Academic Consultant (Part-time) 2003 Till date
CURRICULUM VITAE 1. Name of the Staff : K.BUSCHAIAH 2. Father s Name : Sri. K.Yellaiah 3. Date of Birth : 02.03.1971 4. Designation : Instrumentation Engineer/Scientist 5. Department : Mechanical Engineering
Lecturer Department of Mechanical Engineering BITS Pilani, KK Birla Goa Campus Zuarinagar, Goa 403 726 Phone (0832) 2580416, Mob.-09011091126 E-mail: kiranm@goa.bits-pilani.ac.in malikirand@gmail.com Kiran
Title of the Project Year Funding Agency Grant Sanctioned Status No. 1
Dr. B. D. BACHCHHAV Professor CONTACT E-mail: bdbachchhav@aissmscoe.com Phone: 9850172628 Research Interests Courses Taught Qualifications 1. SE MECHANICAL ( MANUFACTURING PROCESS I) 2. TE MECHANICAL (
Sri Sai Ram Engineering College Department of Production Engineering
College Department of Production Engineering Name Designation Qualification : B.SENTHILKUMAR : Assistant Professor Grade II : M.E. Area of Specialization : Manufacturing Engineering Experience: Teaching
Department of Mechanical Engineering
Velammal Engineering College Department of Mechanical Engineering Name & Photo : Dr. G. Prabhakaran Designation: Qualification : Professor & Head M.E., Ph.D Area of Specialization :, Production & Optimization
PROFILE. 1. Name Mr. Chandrankant Laxman Bhattar. 2. Education. 3. Experience:
PROFILE 1. Name Mr. Chandrankant Laxman Bhattar 2. Education Assistant Professor in Electrical Engineering Rajarambapu Institute of Technology, Rajaramnagar, Islampur 415414. Phone: - (02342) -220329 (298)
FACULTY PROFILE. Chettipalayam Road, Podanur Coimbatore Tamilnadu, India
Name of the Faculty Designation FACULTY PROFILE : Dr. Ashokavarthanan P : Professor and Head of the Department RECENT PHOTOGRAPH OF THE STAFF (Professional One) Date of Birth : 10/04/1979 Residential Address
STAFF PROFILE. Name : Dr. N.SHUNMUGA RAJAN. Date of Birth & Age : , 55 years.
STAFF PROFILE Name : Dr. N.SHUNMUGA RAJAN Date of Birth & Age : 04.09.1963, 55 years Designation : MBA Director Specialization : Marketing E-mail : svndirectormba@gmail.com Teaching Experience : 8 years
CURRICULUM VITAE EDUCATION:
CURRICULUM VITAE Indian Institute of Information Technology Department of Computer Science and Engineering Nagpur, Maharashtra, India 440 006 E-mail: jitendratembhurne@gmail.com Mobile No.: +91 98235 04363
Faculty profile. Subjects/ Specialization. Visvesvaraya Technological University, Belgaum (VTU Belgaum)
Faculty profile 1. Name : Dr..Uday. N Chate : Mob.:+919449734329 Tel(R).:08312481398 e-mail id :unchate@outlook.com/unchate@git.edu 2. Date of Birth : 07.09.1955 3. Designation :Professor(Aeronautical
: Phone : ; PhD: Data Mining (pursuing), Sathyabama Institute of Science and Technology
Joined Sathyabama as a Lecturer in the year 2008. Doing Ph.D in the field of Data Mining at Sathyabama Institute of Science and Technology. Current research focus is on Data Mining, Big Data, Cloud Computing.
Faculty Profile. Dr. T. R. VIJAYA LAKSHMI JNTUH Faculty ID: Date of Birth: Designation:
Faculty Profile Dr. T. R. VIJAYA LAKSHMI JNTUH Faculty ID: 25150330-153821 Date of Birth: 08-12-1979 Designation: Asst. Professor Teaching Experience: 15 years E-mail ID: vijaya.chintala@mgit.ac.in AREAS
Velammal Engineering College Department of Computer Science and Engineering. B.E. (CSE); M.E. (CSE) and PhD (CSE)
Velammal Engineering College Department of Computer Science and Engineering Name & Photo : Dr. R. Manimegalai Designation: Qualification : Area of Specialization : Teaching Experience : Senior Professor
Sri Sai Ram Engineering College
Sri Sai Ram Engineering Department of Electronics and Instrumentation Engineering Name: K.THIRUPURA SUNDARI Designation: Qualification: Area of Specialization: Experience: Number of Workshops/ Conferences/
Department of Chemical Engineering
Sriram Engineering College Department of Chemical Engineering Mr. S. BALACHANDRAN Name & Photo : Designation: Qualification : UG(Specialization) PG(Specialization) Assistant Professor B.Tech (Chemical
SRI SAI RAM ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING. Dr.S.Ramachandran
SRI SAI RAM ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING Paste your recent photo Name: Designation: Qualification: Area of Specialization: Experience: Dr.S.Ramachandran B.E.M.Sc(Engg). Ph.D
V e l a m m a l E n g i n e e r i n g C o l l e g e Department of Electronics & Communication Engineering
V e l a m m a l E n g i n e e r i n g C o l l e g e Department of Electronics & Communication Name & Pho : Dr. J.S.LEENA JASMINE Designation: Qualification : ASSOCIATE PROFESSOR M.E. Ph.D Area of Specialization
Application of Proposed Improved Relay Tuning. for Design of Optimum PID Control of SOPTD Model
VOL. 2, NO.9, September 202 ISSN 2222-9833 ARPN Journal of Systems and Software 2009-202 AJSS Journal. All rights reserved http://www.scientific-journals.org Application of Proposed Improved Relay Tuning
MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad
MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, 500 075 FACULTY PROFILE 1. JNTUH REGISTRATION ID: 69150402-130719 2. NAME: V.V.N. SATYA SURESH 3. DESIGNATION: Associate Professor 4. YEARS OF EXPERIENCE:
KCG College of Technology, Chennai
faculty member : SJAYANTHI Department : COMPUTER SCIENCE AND ENGINEERING Present Designation : ASSISTANT PROFESSOR Selection Grade Residential Address : Flat F1, Rachana Apartments, Plot 67, PVS Nagar,
DR. KRISHAN VERMA. Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad , Haryana, India
DR. KRISHAN VERMA Mob. +91-9716792955 er.krishanverma@yahoo.com dr.krishanverma.me@gmail.com #403, Deptt. of Mechanical Engineering, YMCA University of Science & Technology, Sector-6, Mathura Road, Faridabad-121006,
CURRICULAM VITTAE. Academic Profile
CURRICULAM VITTAE Mallikarjun M Kodabagi Assistant Professor Department of Computer Science and Engineering Basaveshwar Engineering College, Bagalkot-587102 Academic Profile Registered for Ph.D Under VTU,
Profile. Administrative Experience: Subject coordinator in finance. Seminar/ Workshop/ Conference/ FDP/MDP attended:
Profile Work Experience: (10 years ) Presently working as Asst. Professor in Finance in Regional College of Management, Bhubaneswar since 1 st July 2011. Lecturer in Finance in Regional College of Management,
Profile of Professor Dr. Shailendra Naik
Profile of Professor Dr. Shailendra Naik Email: shailendra.naik@mitpune.edu.in, shailendranaik@hotmail.com Phone no.: +91 20-30273501, 30273400. Work Experience: Teaching: 25 years and 9 months. Research:
Title of the Program/Course. S.No. Training program
Name: DR. P. SRI HARI Designation: Professor Department: Electronics and Communication Engg. Mail I d: srihari_p@vnrvjiet.in Experience (in years): 27 Teaching: 27 Research: 04 Others(if any, specify):
Name: Designation: S.USHA. Qualification: Area of specialization: Experience : (As On May2018) Industrial Experience Teaching Experience
Name: S.USHA Designation: Qualification: Area of specialization: Experience : (As On May018) ASSISTANT PROFESSOR-I M.E. EMBEDDED SYSTEM TECHNOLOGIES Industrial Experience Teaching Experience 4 YEARS 17
Escope (EVEN)
DHIRAJLAL GANDHI COLLEGE OF TECHNOLOGY Opp. Salem Airport, Sikkanampatty, Omalur, Salem. Tel.No: 04290-233 355, www.dgct.ac.in, E-mail id: hod.eee@dgct.ac.in DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
Effect of Machining Parameter in GFRP Composite During End Milling Using WC-CO Tool
Effect of Machining Parameter in GFRP Composite During End Milling Using WC-CO Tool 1 L. Martin, 2 V.S.K Venkatachalapathy, 3 A.Selvaraju 1 Research Scholar, Department of Mechanical Engineering, Pondicherry
APPLICATION OF DOE, ANOVA AND REGRESSION ANALYSIS TO STUDY THE EFFECT OF MACHINING FACTORS ON CHISEL EDGE WEAR IN DRILLING GFRP COMPOSITES
APPLICATION OF DOE, ANOVA AND REGRESSION ANALYSIS TO STUDY THE EFFECT OF MACHINING FACTORS ON CHISEL EDGE WEAR IN DRILLING GFRP COMPOSITES Sathish Rao U., Akshay Mimani, Manjot Singh Dhillon, Sanjay S.
Dr.JANAKI.G, M.E. (PED), Ph.D No.3/129, Bajanai Koil St., Sadhananthapuram, Thandalam Post, Mangadu (Via), Chennai
Dr.JANAKI.G, M.E. (PED), Ph.D No.3/129, Bajanai Koil St., Sadhananthapuram, Thandalam Post, Mangadu (Via), Chennai 602 101. OBJECTIVE: Seeking an opportunity to work as a Successful and cooperative Engineer
CHAPTER 6 Raw Material, Quality and Usage Pattern
CHAPTER 6 Raw Material, Quality and Usage Pattern Most of the textile production in the state is made out of cotton yarns and, therefore, cotton yarn is the dominant raw material. The usage of manmade
Saman Ahmad. 4/1476 Jamia Urdu Road, Dodhpur, Aligarh
Saman Ahmad 4/1476 Jamia Urdu Road, Dodhpur, Aligarh-202002 Email: saman.ahmad@yahoo.co.in Academic Qualifications: MSc. In Thermal Engineering- 1 st Division Awarded by Z.H. College of Engineering and
Dr. Mrs. Surekha R. Deshmukh. Associate Professor in Electrical Engineering. Profile Summary
Dr. Mrs. Surekha R. Deshmukh Associate Professor in Electrical Engineering Profile Summary FDPs Name of the college Duration Topic Role MNEICT MHRD Two 10 th July- Electric Power weeks STTP organized 15
DEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING Name Designation Email Qualification Specialization Research Interest : K.VELAVAN : ASSOCIATE PROFESSOR : velavan.mech@sairamit.edu.in : B.E., M.E., (Ph.D) : Manufacturing
Gender Male Date of birth 21 April 1984 Nationality INDIAN. Assistant Professor in Mechanical Engineering (Machine Design)
Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad
UG B.TECH- Automobile First class CGPA Industry 1.5 Years. National conference :03
Name of Teaching Staff* Dr.V.CHANDRAN Designation Associate Professor Department Date of Joining the Institution 16-06-2016 Automobile Engineering Qualifications with Class / Grade UG B.TECH- Automobile
Dr. S. Kanaga Suba Raja
Dr. S. Kanaga Suba Raja Academic title Professor Contact Information Official No. 044-43923049 Personal No. 9486684400 Educational Qualification Ph. D Computer Science and Engineering M. E Computer Science
Mobile: Research Interests: 1. Personal Profile Father s Name:
CURRICULUM VITAE PRIYABRAT GARANAYAK Assistant Professor Department of Electronics and Communication Engineering Indian Institute of Information Technology Pune Email: garanayak.priyabrat@gmail.com Mobile:
Velammal Engineering College Department of Electronics & Instrumentation Engineering
Department of Electronics Name Photo : Ms.P.U.ILAVARASI Designation: Qualification : Area of Specialization : Teaching Experience : Assistant Professor II M.Tech Biomedical UG:6.5 years PG:1 year No. of
Journal - International
Details of publications: Journal - International # Typ Level Year /Mon e Name of the Journal Name of the Paper 1 J I 10/11/2015 Revista Tecnica de la faculted de ingenieria universided dal zulia, Vol.No.:
Design and Fabrication of Special Purpose Tool Fixture for CNC Turrets
Design and Fabrication of Special Purpose Tool Fixture for CNC Turrets Prashanth P V 1 and Sachidananda H K 2* 1 Prashanth P V, PG student, Manufacturing Engineering and technology,school of engineering
Profile of Dr.M.SELVI
Name : Dr.M.Selvi Designation : Assistant Professor Department : Electronics and Communication Bapatla College, Bapatla, Andhra Pradesh 522102 e-mail : drselvimunuswamy@gmail.com Scopus ID : 56046397600
National Conference on Science, Technology and Communication Skills (NCSTCS 2K18), 21st April, 2018, Narula Institute of Technology.
Name of faculty: Dr. Debjani Chakraboti Designation: Assistant Professor Contact Details: 9432137013 Qualification: M.Sc, M.Phil, MBA, Ph.D Research Experience: 11 Years Seminar/Conference Attended: National
1. B.Tech (Mechanical Engineering) 2007 Mechanical Engineering 2. M.Tech (Advanced Manufacturing 2009 AMS
Name :Kode Jaya Prakash Designation:Assistant Professor Department:Mechanical Mail.I.D: jayaprakash_k@vnrvjiet.in Experience (in years): Teaching:05 Research: Others (If any, Specify): 1. Educational /
INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING & TECHNOLOGY (IJECET)
INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING & TECHNOLOGY (IJECET) International Journal of Electronics and Communication Engineering & Technology (IJECET), ISSN 0976 6464(Print),
RESUME. Objective: Academic Qualifications:
RESUME Name: Dr.Sudarshan Rao K Address: S/o K Bhaskar Rao Srinivas Nilaya, Near Janardhan Temple, Post Kapu, Udupi Tq and Dist. 574106. Phone no: Mobile: 9448252890 7204299194 E-mail address: sudakapu@gmail.com
FACULTY PROFILE. Near NH 7 byepass. Kovilpatti. Official Address with Id : Assistant Prof (Sr.Gr). EEE Department. National Engg College, Anna
FACULTY PROFILE Name of the Staff : Dr.S.SENTHIL KUMAR.M.E.Ph.D Communication Address : 5/63, vinayaga nagar, Near NH 7 byepass. Kovilpatti. Official Address with E-mail Id : Assistant Prof (Sr.Gr). EEE
FACULTY PROFILE. Total Experience : 18 Years 7 Months Academic : 18 Years 7 Months. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID Area of Specialization : Dr.P.VETRIVELAN : Associate Professor : vetrivelan.ece@srit.org vetrivelanece@gmail.com : Signal & Image Processing Total Experience :
DEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING Name Designation Email Qualification Specialization Research Interest : Dr.S.MURALI : ASSOCIATE PROFESSOR : murali.mech@sairamit.edu.in : M.E., MBA., PhD : Manufacturing
7. Area of Specialization : Industrial Engineering
1. Name : Dr. G. PADMANABHAN 2. Designation : Professor of Mechanical, S.V.University College of -517502 3. Phone No. : 09849505068(M), 0877-2245335(Res) e-mail : gpnsvuce@yahoo.co.uk 4. Date of Birth
Mobile: Research Interests: 1. Personal Profile Father s Name:
CURRICULUM VITAE Dr. PRIYABRAT GARANAYAK Assistant Department of Electronics and Communication Engineering Indian Institute of Information Technology Pune Email: garanayak.priyabrat@gmail.com Mobile: (+91)
Title of the Work To Whom / When In Association with Period. Orissa State Disaster. California Tamil Academy,USA
S.SANKAR Assistant Professor, Department of Computer Science and Engineering, Dhirajlal Gandhi College of Technology, Omalur, Tamilnadu, India. Experience: 4.1 Years E-Mail: sankar.cse@dgct.ac.in Contact
Performance Analysis of Transmit Antenna Selection with MRC in MIMO for Image Transmission in Multipath Fading Channels Using Simulink
International Journal of Electrical and Computer Engineering (IJECE) Vol. 5, No. 1, February 2015, pp. 119~128 ISSN: 2088-8708 119 Performance Analysis of Transmit Antenna Selection with MRC in MIMO for
FACULTY PROFILE. Period Name of the Organization Designation From To 01 K.S.R.College of Engineering Professor
FACULTY PROFILE 0 Name : Dr.S.Karthikeyan 02. Designation : Professor 03. Date of Joining in this Institution : 108.2004 04. Specialization : Image Processing 05. Experience & Promotion Details (Chronological):
RESUME OF Dr. R. THIRUMALAI. M.E (NIT,Trichy)., Ph.D (Anna Univ, Chennai)
Phone: +91-9843240635 Email: vkrthirumalai@gmail.com RESUME OF Dr. R. THIRUMALAI M.E (NIT,Trichy)., Ph.D (Anna Univ, Chennai) I. Name : Dr. R.THIRUMALAI II. Current Designation : Professor in Mechanical
International Journal of Electronics and Communication Engineering & Technology (IJECET), ISSN INTERNATIONAL JOURNAL OF ELECTRONICS AND
INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING & TECHNOLOGY (IJECET) ISSN 0976 6464(Print) ISSN 0976 6472(Online) Volume 3, Issue 3, October- December (2012), pp. 303-313 IAEME: www.iaeme.com/ijecet.asp
Faculty Details proforma
Faculty Details proforma Title Dr. First Name NAVEEN Designation KUMAR Associate Professor Address 94 D, Pocket B, Dilshad Garden, Delhi - 110095 Last Name JAIN Photograph Phone No Office 23233420 Residence
CHANGANATH HOUSE, AYYAPPANKAVU, CHITTOOR ROAD, KOCHI-18. Assistant Professor, Dept. of Ship Technology Cochin University of Science & Technology
Name : Dr SUDHEER C.B. Date Of Birth : 17-03-1961 Sex Marital Status : Male : Married Address (Residential) : Address (Official) : CHANGANATH HOUSE, AYYAPPANKAVU, CHITTOOR ROAD, KOCHI-18. Assistant Professor,
VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY KNOWLEDGE ASSET
VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY KNOWLEDGE ASSET 2017-18 Please update faculty profile as per the following instructions: Times New Roman Font size-12 Single Column 1 inch margin
Bleaching Technology for Textiles Course Code: GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum BLEACHING TECHNOLOGY FOR TEXTILE (Code: 3332801) Diploma Programmes in which this course is offered Textile Processing Technology
M.Tech: Industrial Automation & Robotics The National Institute of Engineering, Mysore-08. (Established in 1946) Department of Mechanical Engineering
M.Tech: Industrial Automation & Robotics The National Institute of Engineering, Mysore-08 (Established in 1946) Department of Mechanical Engineering About our Institute and the Department The National
Study of Surface Roughness Characteristics of Drilled Hole in Glass Fiber Reinforced Plastic (GFRP) by CNC Milling
RESEARCH ARTICLE OPEN ACCESS Study of Surface Roughness Characteristics of ed Hole in Glass Fiber Reinforced Plastic (GFRP) by CNC Milling Shubham. S. Dabhade* *(Department of Mechanical Engineering, MIT
CURRICULAM VITTAE. Academic Profile
CURRICULAM VITTAE Dr. Mallikarjun M Kodabagi Associate Professor Department of Computer Science and Engineering Basaveshwar Engineering College, Bagalkot-587102 Email id: mmkodabagi@gmail.com Mb: 9845781811
Dr K MEENAKSHY ASSOCIATE PROFESSOR
Dr K MEENAKSHY ASSOCIATE PROFESSOR Contact Details Office Address : Associate Professor in EEE, Dept. of AE&I GEC, Kozhikode Residential Address :Pratheeksha, House No 3, Green Gardens Karshaka Road, Vaduthala,
Profile. 4 th Ward,Near Sandhaipet,Karuppur,Salem : Landline : - Mobile:
Profile Name of the faculty member : ARULRAJ.P Present Designation : Assistant Professor Name of the Department : Computer Science and Name of the College : Dhirajlal Gandhi College of Technology, Opposite
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. COURSE CURRICULUM COURSE TITLE: DYEING TECHNOLOGY FOR SYNTHETIC TEXTILE (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: DYEING TECHNOLOGY FOR SYNTHETIC TEXTILE (Code: 3342802) Diploma Program in which this course is offered Textile Processing
Charge Pump Phase Locked Loop Synchronization Technique in Grid Connected Solar Photovoltaic Systems
IOSR Journal of Computer Engineering (IOSR-JCE) e-issn: 2278-0661, p- ISSN: 2278-8727Volume 16, Issue 1, Ver. VII (Feb. 2014), PP 91-98 Charge Pump Phase Locked Loop Synchronization Technique in Grid Connected
Comparative Performance of Conventional Transducers & Rogowski Coil for Relaying Purpose
Comparative Performance of Conventional Transducers & Rogowski Coil for Relaying Purpose Ashish S. Paramane1, Avinash N. Sarwade2 *, Pradeep K. Katti3, Jayant G. Ghodekar4 1 M.Tech student, 2 Research
STI Policy, Indicators and Industry- Academia Interaction
STI Policy, Indicators and Industry- Academia Interaction Dr. Neeraj Sharma Advisor & Head Technology Development and Transfer and Policy Research Department of Science & Technology E-mail: neerajs@nic.in
DETAILS OF EXPERIENCE SNAPSHOT MANIKYAM SANDEEP. Professional Exp. DESIGN. Designation Organization Period Duration
Name Designation Qualification Professional Exp. Research Interests MANIKYAM SANDEEP Associate Professor ME(PRODUCTION)(PHD) 7 Year PRODUCTION AND DESIGN DETAILS OF EXPERIENCE Designation Organization
RESUME. Maulana Azad National. Institute of Technology
Page 1 of 5 Rishi Kumar +91 9879657045 rishikumar.patliputra@gmail.com Synopsis Objective To work in a progressive organization that incorporates varied spectrums of work & diversity, this endows consistency,
Sinhgad Technical Education Society's Sinhgad College of Engineering. Vadgaon (Budruk) Off. Sinhgad Road,S.No. 44/1, Year of Passing
Technical Education Society's Vadgaon (Budruk) Off. Road,S.No. 44/1, Prof. Rajaram BE IT pathakgr.scoe@sinhgad.edu 9822400791 Academic Qualification Degree BE Master of PhD Institute Name Name Walch Institue
Ph.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.
QS Ranking NAAC Accredited A Emerging Researchers with creative dynamism for promising innovations are invited to join Hindustan, a blossoming Deemed University with a rich heritage and commitment for
Personal Details. Career Objective. Awards and Accomplishments
Dr. Anis Fatima Assistant professor Industrial and Manufacturing NED University of Engineering and Technology Room No. 204, IM building Email: anisf@neduet.edu.pk Telephone Ext: 2250 Personal Details Gender
University/college Present Position Date of Joining Total Experience Associate Professor Till Date 28+ years
Dr. M. VENKATESWARA RAO GITAM Institute of Technology Dept. of. Information Technology GITAM University Rushikonda, Visakhapatnam-45 AP, India. Phone no: 0891-2840285 email id: mandapati_venkat@yahoo.co.in
DETAILS OF EXPERIENCE SNAPSHOT. Name MANIKYAM SANDEEP. Professional Exp. DESIGN. Designation Organization Period Duration
DETAILS OF EXPERIENCE Name MANIKYAM SANDEEP Designation Qualification Professional Exp. Research Interests Assistant Professor ME(PRODUCTION)(PHD) 5 Year PRODUCTION AND DESIGN Designation Organization
H C & Company.
+91-8048745712 H C & Company https://www.hcandcompany.com/ We are engaged in Manufacturing & Service Providing of heavy duty precision machining equipment, metal bushes, forged rolls, bearing housing,
Patents: National International
Name: Dr. K.SUMATHI Designation: Qualification: Area of specialization: Assistant Professor Grade I M.E., PhD Biomedical Image Processing Experience : (As on May2018) Industrial Experience Teaching Experience
Academic Achievement Report of Dr. Zakir Ali
Academic Achievement Report of Dr. Zakir Ali 1. Name : Dr. Zakir Ali 2. Present Institution Address : Bundelkhand University Jhansi Uttar Pradesh-284128 3. Address for Correspondence: 1336/1,Shivaji Nagar
M.Tech: Industrial Automation & Robotics
M.Tech: Industrial Automation & Robotics The National Institute of Engineering Mysuru-08 (Established in 1946) Department of Mechanical Engineering About our Pride Institute and the Department The National
EVALUATION OF TiCN/TiN AND TiAlN COATED TOOLS FOR TURNING AISI1040 UNDER DRY CONDITION
EVALUATION OF TiCN/TiN AND TiAlN COATED TOOLS FOR TURNING AISI1040 UNDER DRY CONDITION N.E. EDWIN PAUL 1, P. MARIMUTHU 2, K. CHANDRASEKARAN 3 and P. MURUGESAN 4 1 Research Scholar, Department of Mechanical
FACULTY PROFILE. Name of the College. Year of Passin g
FACULTY PROFILE Name of Faculty: R.Arunbharathi Designation: Assistant Professor Date of Birth: 10.10.1987 Residential Address: R-25, Kovaipudur, Coimbatore - 641042 Mobile Number: 9894091260 / 7402601332
Curriculum-Vitae. K.Kavitha No. 63, Alangudiar Street, Karaikudi. Mobile: Objective:
K.Kavitha No. 63, Alangudiar Street, Karaikudi. Email:kavitha.urc@gmail.com Mobile: 9443133000 Curriculum-Vitae Objective: To work in a creative, challenging environment where I can constantly learn and
Faculty Profile PROFESSIONAL EXPERIENCE. 1. Name of the Faculty : Dr.S.Sujatha. 2. Department and Designation : MCA & Associate Professor
Faculty Profile 1. Name of the Faculty : Dr.S.Sujatha 2. Department and Designation : MCA & Associate Professor 3. Date of Joining : 01.06.2007 4. Faculty ID : TF0150 5. E-mail Address : sujathaaut@gmail.com
FACULTY PROFILE. : Wireless Communication, Biomedical Image Processing, Total Experience : 12 years 7 months Academic : 12 years 1 Month
FACULTY PROFILE Name Designation Email ID : Dr. S.MARY PRAVEENA : Associate Professor :marypraveena.ece@srit.org Area of Specialization : Wireless Communication, Biomedical Image Processing, Optical communication
DR. PRAMOD KUMAR NAIK
DR. PRAMOD KUMAR NAIK Contact No. +919602547207 kpramodnaik@gmail.com, pramod_eco@curaj.ac.in 1. GENERAL INFORMATION Address Assistant Professor Department of Economics Central University of Rajasthan
RESUME. Govt. College of Technology, Coimbatore, Anna University. Bharath Institute of Science and Technology, Madras University
RESUME Dr.SHANTHI.K.G Professor, Electronics and Communication Engineering, R M K College of Engineering and Technology, Puduvoyal, Kavaraipettai, Chennai 601206. Phone:044-33303634, 044-33303555 Mobile:
SUMMARY C.V. Dr. Irfan Ahmad
Educational Qualifications: Particulars Year Topic SUMMARY C.V. Dr. Irfan Ahmad M.Phil. 1993 A Critical Appreciation of the 1991 Industrial Policy of India Ph.D. 1995 Evaluation of Indian Industrial Policy
Training Calendar 2018
Training Calendar 2018 Training and seminars from industry - for industry www.festo-didactic.com/in-en Didactic Training for the industry Photo: WorldSkills, Abu Dhabi The relentless competitive pressure
: Ground Improvement Techniques, Environmental Geo techniques
FACULTY PROFILE Name Designation Dr.SOBHA CYRUS Professor Date of Birth 31/10/1968 Official address Name of Father Name of Mother Professor in Civil Engg., School of Engineering Cochin University of Science
VAP (VALUE ADDED PROGRAM COURSE) Ansys Training
VAP (VALUE ADDED PROGRAM COURSE) Date of Commencement: - 24 th August 2018 Ansys Training Organized by: - Indian Society of Manufacturing Engineers (ISME) Organized for: TE Production Engineering Students
M.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
FACULTY PROFILE. Degree Specialization University. Ph.D Reinforcement Learning Approaches to Cochin University of
FACULTY PROFILE Name : Dr. E.A. Jasmin Designation : Associate Professor Department : Dept of Electrical & Electronics Engineering Qualification : Degree Specialization University Ph.D Reinforcement Learning
Interleaved boost converter with Perturb and Observe Maximum Power Point Tracking Algorithm for Photovoltaic System
SBN 978-93-84468-15-6 Proceedings of 215 nternational Conference on Substantial Environmental Engineering and Renewable Energy (SEERE-15) Jan. 13-14, 215 Abu Dhabi (UAE), pp. 22-3 nterleaved boost converter