MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad

Size: px

Start display at page:

Download "MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad"

Kimberly Perry
5 years ago
Views:

1 MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, FACULTY PROFILE 1. JNTUH REGISTRATION ID: NAME: V.V.N. SATYA SURESH 3. DESIGNATION: Associate Professor 4. YEARS OF EXPERIENCE: 21 years 5. ID: 6. UG DEGREE: B.E in Mechanical Engineering 7. PG DEGREE: M.Tech (CAD/CAM), M.Sc 8. PH.D(AREA OF THE PH.D WORK): Thesis submitted (Metal Forming) 9. SUBJECTS TAUGHT: Engg. Mechanics, CAD/CAM, Strength of Materials, Engg. Graphics etc. 10. PAPER PUBLICATIONS IN INTERNATIONAL JOURNALS: SCI/SCIE Journals Satya Suresh V.V.N, Srinivas Prakash Regalla, Amit Kumar Gupta (2018) Optimum parameters to minimize weld line movement in the warm forming of tailor welded blanks Brazilian Journal of Mechanical Engineering Sciences, 40:234 Satya Suresh V.V.N, Srinivasa Prakash Regalla, Amit Kumar Gupta (2017) Combined effect of thickness ratio and selective heating on weldline movement in stamped TWBs Journal of Materials and Manufacturing Processes, VOL. 32, NO. 12, Scopus Journals Satya Suresh, V.V.N, Srinivasa Prakash Regalla (2017) Investigations on dimensional accuracy of stamped tailor welded blanks under warm forming conditions ASME Proceedings of the International Mechanical Engineering Conference and Exposition. doi: 10. Satya Suresh V.V.N, Srinivasa Prakash Regalla, Amit Kumar Gupta (2017) Influence of geometric parameters on weld line movement in the selective heating of tailor welded blanks Advances in Materials and Processing Technologies, Vol-3, Issue-3,

2 Satya Suresh V.V.N, Srinivasa Prakash Regalla, Ratna Sudheer G (2016) Effect of Localized Heat Treatment on the Weld Line Shift in Deep Drawing of Tailor Welded Blanks (TWBs) AIP Conf. Proc. 1769, Satya Suresh V.V.N, Srinivas Prakash Regalla, Amit Kumar Gupta, Padmanabham G (2015) Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding, Materials Today Proceedings, 2, pp (Elsevier) Arman Khan, Satya Suresh V.V.N, Srinivas Prakash Regalla (2014) Effect of thickness ratio on Weld line Displacement in Deep Drawing of Aluminium Steel Tailor Welded Blanks Procedia materials Science, 6, pp (Elsevier) Other International journals Pavan Kalyan L, Satya Suresh V.V.N (2015) Human-Robot Interaction with an assistive robot to help people with severe motor impairments International Journal of Scientific Engineering and technology research, ISSN , vol 4, Issue 18 pp Pavan Kalyan L, Satya Suresh V.V.N (2015) Fabrication of a Human-Robot Interaction with an assistive robot to help people with severe motor impairments using PC control International Journal of Professional Engineering Studies, vol 5 Issue 1, pp Satya Suresh V.V.N, Srinivas Prakash Regalla, Uday Kumar R (2013) Experimental investigations, Modeling and Simulation of Tailor welded blanks: A review International Journal of Current Engineering and Technology, Special Issue, pp (Inpressco) Prasad Reddy P.V, Satya Suresh V.V.N(2013) A review on importance of universal gripper in industrial robot applications International Journal of Mechanical Engineering and Robotics research, vol.2. no.2, pp , ISSN PAPER PUBLICATIONS IN INTERNATIONAL CONFERENCES: IMeche ASME conference held in Florida, USA between 3-9 November, 2017 Presented a paper on Effect of factors influencing weld line movement in stamping of selectively heated sheet metal tailor welded blanks at Advances in materials processing technologies conference, AMPT 2016, Malaysia between 8-11 November,2016 Presented a paper on Effect of Localized Heat Treatment on the Weld Line Shift in Deep Drawing of Tailor Welded Blanks (TWBs) at 19 th ESAFORM conference Nantes, France between th April, 2016 Presented a poster on Comparison of welding processes in the forming of tailor welded blanks in the 6 th WRCC organised by International Institute of Welding during 7-9 April, 2016 at Presented a paper on Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding, International Conference on Material Processing and Characterization (ICMPC) on 14 th March,2015 held at Griet Presented a paper on Minimization of weldline movement and improvement of geometric accuracy in the forming of Tailor welded blanks using finite element

3 methods at International Symposium for Research Scholars (ISRS) at IIT Madras, December 11-13, 2014 Presented a paper on Effect of thickness ratio on Weld line Displacement in Deep Drawing of Aluminium Steel Tailor Welded Blanks International Conference on Material Processing and Characterization (ICMPC) on 14 th March,2014 held at Griet Presented a paper on Experimental investigations, Modeling and Simulation of Tailor welded blanks: A review at International Conference on Advances in Mechanical Sciences (ICAMS) held on 11 th January, 2014 at Vardhman college of engineering at A Paper on Optimization of Tall chimneys subjected to dynamic loads presented in NISA Users conference held at Bangalore in PAPER PUBLICATIONS IN NATIONAL JOURNALS: Satya Suresh, V.V.N, Srinivasa Prakash Regalla (2017) A Novel Deep Drawing Tooling With Selective Heating And Cooling For Tailor Welded Blanks (TWBs) The Patent Office Journal No.25/2017, PAPER PUBLICATIONS IN NATIONAL CONFERENCES: Presented a paper at Sheet metal forming research association 16 SMFRA 16 conference at IIT Bombay, Mumbai, between 8-9 Dec, 2016 Presented a paper on A combined FEA and design of experiments approach for the design and analysis on the weld line movement in localized warm forming of Tailor Welded Blanks at DPLC, 2006 conference held in BITS-Pilani, campus Presented a paper on Effect of weld line position and thickness ratio on the movement of weld line in the warm forming of Tailor welded blanks at RAMR, 2016 conference held in BITS-Pilani, campus Presented a poster on Approximation of perform shape for the Minimization of weld line shift in deep drawing of Tailor welded blanks in the Advances in Materials joining technologies [AMJT 2015] organized by Indian Institute of Welding, branch on 29 th May 2015 Presented a poster on Minimization of weld line movement by the approximation of weld in the forming of Tailor welded blanks (TWB) using finite element simulation in the workshop on Advances in Welding and surface engineering (AWSE) organized by IIW, branch in October 2014 Presented a paper on Fuzzy logic based uncertainty modeling in analysis, design and optimization in the National conference at JNTUH, (NCSAME-2004), pp Presented a Paper on Optimization of Tall chimneys subjected to dynamic loads presented in NISA Users conference held at Bangalore in 1997

4 14. BOOKS PUBLISHED: 01 Open Heart, a Self counseling book 15. RESEARCH PROJECTS: UNDERTAKEN WITH NAME OF THE SPONSORING AGENCY: One research grant of Rs. 4.8 lakhs received from UGC towards Minor research project with project no. F MRP-6160/15 (SERO/UGC) 16. RESEARCH GUIDANCE: Guided six M.Tech Students 17. CONTRIBUTIONS AT THE DEPARTMENTAL LEVEL: Co-Convenor (Technovation), class incharge, Dept. Library Incharge, students project incharge. 18. CONTRIBUTIONS AT THE COLLEGE LEVEL: Co-Convenor of Anti-Ragging squad and MAGISTECH, member of Nirvana. 19. REFRESHER COURSES/ WORKSHOPS/CONFERENCES ATTENDED: a. Two day national seminar on Metallurgy for Non-Metallurgists between 29-30, 2015 held at MGIT,. b. Two week workshop on Latest developments in Hydraulics, Pneumatics and electronic control systems held during 4-16 May 2015 at M.G.I.T, Gandipet, c. One week STTP on Experimental Designs for Optimization organized by Osmania University during,, 19 th -23 rd May,2014. d. One week ISTE-SRM Short term training programme on Mechatronics organized by Mahatma Gandhi Institute of Technology,, 5 th 10 th May e. 4-day programme at 1 st world parliament on spirituality, Dec 2012 at. f. Two day conference on Mind-Body-Medicine held at on 12 th & 13 th Feb, 2011 g. One week workshop on STTP on Mechatronics at M.G.I.T, Gandipet, during 12th 16th July 2010 h. Two week workshop on Nano materials and Mechanics at JNTU,Kukatpally held from 22 nd June 3 rd July 2009 i. Two week Faculty Training Programme on Effective Communication held at MGIT, Gandipet during 20 June June j. AICTE/ISTE Shot term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology,, 2nd 7th June 2003 k. Short term training programme on Finite Element methods and applications held on August 1998 at CBIT,. l. Short term training programme on Computer Aided Designing and Analysis held on 16-27th August 1999 at CBIT,. m. 3- Day Entrepreneurship Awareness Camp held on 17-19th August 2000, at CBIT & MGIT,, organized by center for Bharatiya Marketing Development, supported by Dept. of Science & Technology.

5 n. AICTE/ISTE Short term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology,, 2nd 7th June 2003 o. Two week refresher course on Engineering Mechanics and Engineering Graphics organized by JNTU and ISTE between Oct, 1998 p. Two months training programme on Finite Element analysis (ANSYS-5.0) Engineers Cadd centre, April June, 1995 q. One month training programme on AutoCAD ver.12 at Institute of Infocad, MEMBERSHIP OF PROFESSIONAL BODIES: o Indian Society for Technical Education Life Member (ISTE) LM 35549, 2003 o Indian institute of Welding(IIW) Life member (VIZ/M/R-11366/L) o American Society for Mechanical Engineers (ASME) ANY OTHER CONTRIBUTION: Patents filed: 01 A NOVEL DEEP DRAWING TOOLING WITH SELECTIVE HEATING AND COOLING FOR TAILOR WELDED BLANKS (TWBs) Indian Patent Application No. 4038/CHE/2015, August 04, 2015 Grants received: 02 1) Research grant of Rs. 4.8 lakhs received from UGC towards Minor research project with project no. F MRP-6160/15 (SERO/UGC) 2) Travel grant received from UGC towards presenting paper at the 19 th ESAFORM conference held at Nantes, France between th April, 2016

Faculty Profile. Dr. T. R. VIJAYA LAKSHMI JNTUH Faculty ID: Date of Birth: Designation:

Faculty Profile. Dr. T. R. VIJAYA LAKSHMI JNTUH Faculty ID: Date of Birth: Designation: Faculty Profile Dr. T. R. VIJAYA LAKSHMI JNTUH Faculty ID: 25150330-153821 Date of Birth: 08-12-1979 Designation: Asst. Professor Teaching Experience: 15 years E-mail ID: vijaya.chintala@mgit.ac.in AREAS